All MIBs › ZXR10-CLI-MIB › zxr10CLIAutoSaveCpuLimitInterval
zxr10CLIAutoSaveCpuLimitInterval
Module: ZXR10-CLI-MIB
OID (symbolic): ZXR10-CLI-MIB::zxr10CLIAutoSaveCpuLimitInterval
OID (numeric): 1.3.6.1.4.1.3902.3.6000.52.1.3.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The time interval of automatic saving configuration when CPU utilization reaches to upper limit. If the interval is not configured, configuration is not saved when exceeds CPU utilization. 0 indicates that the interval does not take effect.
What is zxr10CLIAutoSaveCpuLimitInterval?
Sets, in minutes (0-60), how long to wait and retry an automatic configuration save when CPU utilization was too high to save immediately; 0 means a save is simply skipped instead of retried after a delay.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.52.1.3.4 snmpwalk -v2c -c public <target> ZXR10-CLI-MIB::zxr10CLIAutoSaveCpuLimitInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.52.1.3.4.1 snmpget -v2c -c public <target> ZXR10-CLI-MIB::zxr10CLIAutoSaveCpuLimitInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.6000.52.1.3.4.1 i <value>
Start monitoring ZTE ZXR10 series routers (CLI access-control/command-execution-audit status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-CLI-MIB::zxr10CLIAutoSaveCpuLimitInterval OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 series routers (CLI access-control/command-execution-audit status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | MR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.52 | zxr10CLIMIB | ZXR10-CLI-MIB |
| 1.3.6.1.4.1.3902.3.6000.52.1 | zxr10CLIGlobalObjects | ZXR10-CLI-MIB |
| 1.3.6.1.4.1.3902.3.6000.52.1.3 | zxr10CLIAutoSaveGlobalObjects | ZXR10-CLI-MIB |
| 1.3.6.1.4.1.3902.3.6000.52.1.3.4 | zxr10CLIAutoSaveCpuLimitInterval | ZXR10-CLI-MIB |