| OID symbolic | OID numeric | Type | Access | Description |
| zhoneAlarm | 1.3.6.1.4.1.5504.3.1.18 | | | This entry list contains tables of the active outstanding alarms in a system.
It also provides statistical information in terms of total # of active
alarms raised. |
| zhoneAlarmStats | 1.3.6.1.4.1.5504.3.1.18.1 | | | |
| C32 zhoneAlarmActiveOverflowCnt | 1.3.6.1.4.1.5504.3.1.18.1.1 | Counter32 | read-only | The number of active alarms that have not been put into
the alarmActiveTable since system restart as a result
of extreme resource constraints.
This counter wrapped around once it reaches its maximum value. |
| C32 zhoneAlarmActiveStatsCurrentCnt | 1.3.6.1.4.1.5504.3.1.18.1.2 | Counter32 | read-only | The total number of currently active alarms on the system.
This counter wrapped around once it reaches its maximum value. |
| C32 zhoneAlarmActiveStatsTotalCnt | 1.3.6.1.4.1.5504.3.1.18.1.3 | Counter32 | read-only | The total number of active alarms since system restarted.
This counter wrapped around once it reaches its maximum value. |
| C32 zhoneAlarmClearStatsTotalCnt | 1.3.6.1.4.1.5504.3.1.18.1.4 | Counter32 | read-only | The total number of cleared alarms since system restarted.
This counter wrapped around once it reaches its maximum value. |
| TIK zhoneAlarmLastRaised | 1.3.6.1.4.1.5504.3.1.18.1.5 | TimeTicks | read-only | The value of sysUpTime at the time of the last
alarm raise for this alarm list.
If no alarm raises have occurred since the
last re-initialization of the local network management
subsystem, then this object contains a zero value. |
| TIK zhoneAlarmLastCleared | 1.3.6.1.4.1.5504.3.1.18.1.6 | TimeTicks | read-only | The value of sysUpTime at the time of the last
alarm clear for this alarm list.
If no alarm clears have occurred since the
last re-initialization of the local network management
subsystem, then this object contains a zero value. |
| zhoneAlarmModelTable | 1.3.6.1.4.1.5504.3.1.18.2 | | not-accessible | This table contains the information in order to obtain the unique object
instance id for every active alarm in the zhoneAlarmActiveTable. |
| zhoneAlarmModelEntry | 1.3.6.1.4.1.5504.3.1.18.2.1 | | not-accessible | The zhoneAlarmModeEntries indicate which variableId (Varbind #) indicates
the object instance for which an active alarm was raised/cleared. |
| ZHO zhoneAlarmModelAlarmId | 1.3.6.1.4.1.5504.3.1.18.2.1.1 | ZhoneAlarmTypeId | not-accessible | This entry specifies the alarm ID number. |
| OID zhoneAlarmModelNotificationId | 1.3.6.1.4.1.5504.3.1.18.2.1.2 | OBJECT IDENTIFIER | not-accessible | The trap object identifier (OID) value that allows for the given
alarmTypeId to be set or cleared. This value is used as an index
to the zhoneAlarmModelTable. |
| I32 zhoneAlarmModelVariableId | 1.3.6.1.4.1.5504.3.1.18.2.1.3 | Integer32 | read-only | The zhoneAlarmModelVariableId identifies the varbind number for a given
alarmActiveId and NotificationId that contains the unique object
instance that raised/cleared that alarm. |
| OCT zhoneAlarmModelDescription | 1.3.6.1.4.1.5504.3.1.18.2.1.4 | OCTET STRING | read-only | This entry provides a text information of the alarm. |
| zhoneAlarmActiveTable | 1.3.6.1.4.1.5504.3.1.18.3 | | not-accessible | A table of Active Outstanding Alarm entries in a system. |
| zhoneAlarmActiveEntry | 1.3.6.1.4.1.5504.3.1.18.3.1 | | not-accessible | Entries appear in this table when alarms are raised.
The active alarm entries are removed when the alarm is cleared.
If under extreme resource constraint the system is unable to
add any more entries into this table, then the
alarmActiveOverflow statistic will be increased by one. |
| ZHO zhoneAlarmActiveId | 1.3.6.1.4.1.5504.3.1.18.3.1.1 | ZhoneAlarmTypeId | not-accessible | This entry specifies the alarm ID number. |
| OID zhoneAlarmActiveResourceId | 1.3.6.1.4.1.5504.3.1.18.3.1.2 | OBJECT IDENTIFIER | not-accessible | This object identifies the resource under alarm.
The resource id can be determined based on the varbind # that determines
the resource id. The mapping of which varbind defines the resource id
is defined in the zhoneAlarmModelTable. For every alarmTypeId, there is
a definition of which traps set/clear that alarm and the varbind number
that determines the object instance that the alarm is raised/cleared
(resource id).
If there is no corresponding resource, then
the value of this object is 0.0. |
| U32 zhoneAlarmActiveVariables | 1.3.6.1.4.1.5504.3.1.18.3.1.3 | Unsigned32 | read-only | The number of variables (varbinds) in alarmActiveVariableTable for this
alarm. |
| OID zhoneAlarmActiveNotificationId | 1.3.6.1.4.1.5504.3.1.18.3.1.4 | OBJECT IDENTIFIER | read-only | The Trap object identifier of the alarm state transition
that is occurring.
This entry indicates the trap oid that caused the alarm to be raised. |
| ZHO zhoneAlarmActiveSeverity | 1.3.6.1.4.1.5504.3.1.18.3.1.5 | ZhoneAlarmSeverity | read-only | This entry identifies the severity level of the alarm. |
| zhoneAlarmActiveVariableTable | 1.3.6.1.4.1.5504.3.1.18.4 | | not-accessible | A table of variables to go with each active alarm entries. |
| zhoneAlarmActiveVariableEntry | 1.3.6.1.4.1.5504.3.1.18.4.1 | | not-accessible | Entries appear in this table when there are variables in
the varbind list of a corresponding alarm in zhoneAlarmActiveTable.
Entries appear in this table as though the trap/notification
had been transported using zhone Trap definition. |
| I32 zhoneAlarmActiveVariableId | 1.3.6.1.4.1.5504.3.1.18.4.1.1 | Integer32 | not-accessible | The alarm variable's object identifier. |
| ZHO zhoneAlarmActiveVariableValueType | 1.3.6.1.4.1.5504.3.1.18.4.1.2 | ZhoneAlarmActiveVariableValue | read-only | The type of the value. One and only one of the value
objects that follow is used for a given row in this table,
based on this type. |
| C32 zhoneAlarmActiveVariableCounter32Val | 1.3.6.1.4.1.5504.3.1.18.4.1.3 | Counter32 | read-only | The value when alarmActiveVariableType is 'counter32'. |
| U32 zhoneAlarmActiveVariableUnsigned32Val | 1.3.6.1.4.1.5504.3.1.18.4.1.4 | Unsigned32 | read-only | The value when alarmActiveVariableType is 'unsigned32'. |
| TIK zhoneAlarmActiveVariableTimeTicksVal | 1.3.6.1.4.1.5504.3.1.18.4.1.5 | TimeTicks | read-only | The value when alarmActiveVariableType is 'timeTicks'. |
| I32 zhoneAlarmActiveVariableInteger32Val | 1.3.6.1.4.1.5504.3.1.18.4.1.6 | Integer32 | read-only | The value when alarmActiveVariableType is 'integer32'. |
| OCT zhoneAlarmActiveVariableOctetStringVal | 1.3.6.1.4.1.5504.3.1.18.4.1.7 | OCTET STRING | read-only | The value when alarmActiveVariableType is 'octetString'. |
| IP zhoneAlarmActiveVariableIpAddressVal | 1.3.6.1.4.1.5504.3.1.18.4.1.8 | IpAddress | read-only | The value when alarmActiveVariableType is 'ipAddress'. |
| OID zhoneAlarmActiveVariableOidVal | 1.3.6.1.4.1.5504.3.1.18.4.1.9 | OBJECT IDENTIFIER | read-only | The value when alarmActiveVariableType is 'objectId'. |
| C64 zhoneAlarmActiveVariableCounter64Val | 1.3.6.1.4.1.5504.3.1.18.4.1.10 | Counter64 | read-only | The value when alarmActiveVariableType is 'counter64'. |
| OPA zhoneAlarmActiveVariableOpaqueVal | 1.3.6.1.4.1.5504.3.1.18.4.1.11 | Opaque | read-only | The value when alarmActiveVariableType is 'opaque'.
Note that although RFC2578 [RFC2578] forbids the use
of Opaque in 'standard' MIB modules, this particular
usage is driven by the need to be able to accurately
represent any well-formed notification, and justified
by the need for backward compatibility. |
| OID zhoneAlarmActiveVariableResourceId | 1.3.6.1.4.1.5504.3.1.18.4.1.12 | OBJECT IDENTIFIER | read-only | This is the instance OID for the variable binding whose
instance OID is different from that of the
zhoneAlarmActiveResourceId. If this instance OID is not
required or the same as zhoneAlarmActiveResourceId, it
will have a default value of 0.0.
For example:
atmVclOperStatusChange would have ifIndex.vpi.vci as its
alarm resource Id. But for the trap variable binding
of zhoneTrapPort, the instance id is 0. |
| zhoneAlarmGroup | 1.3.6.1.4.1.5504.3.1.18.5 | | | Alarm MIB Group Definition for all Alarm MIB Entries. |
| genAlarm | 1.3.6.1.4.1.5504.6.79 | | | Centralized Alarm MIB |