ZHONE-COM-VOICE-SIG-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZHONE-COM-VOICE-SIG-MIB

Organization: Zhone Technologies.

Last Updated: 2004-10-21

Category: VoIP and Telephony

Description: Manages Zhone Technologies voice signaling protocol configuration for analog and digital telephone lines.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZHONE-COM-VOICE-SIG-MIB?

ZHONE-COM-VOICE-SIG-MIB is a Zhone Technologies MIB defining voice signaling configuration for analog and digital telephone lines on Zhone access platforms, covering system-wide voice signaling parameters such as hookflash timing. It exposes a system-side scalar profile of voice signaling settings that the device auto-creates with default values at startup if not already configured by the user. This MIB is primarily a configuration-status MIB, letting an operator monitor whether the voice signaling profile exists and confirm its current parameter values (such as hookflash timers) match the deployment's telephony signaling requirements, which is important for correct call feature behavior like hookflash-based call transfer or three-way calling. It is a vendor-specific Zhone MIB with no explicit dependency on other MIBs apparent from the available description. It is typically deployed on Zhone integrated access devices or multi-service access nodes providing POTS/voice services alongside broadband access. Engineers can download the ZHONE-COM-VOICE-SIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZHONE-COM-VOICE-SIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Zhone Technologies integrated access device / voice gateway

Monitoring Examples

No object or table names were provided for this module, so a concrete polling scenario cannot be grounded in real identifiers; generally an operator would poll the system voice signaling scalar profile to confirm hookflash timer values are set as expected, and would notice if the profile reverted to default values, indicating an unexpected system reset or reconfiguration.

Imported Objects

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TruthValue

From Zhone

zhoneVoiceOBJECT-IDENTITY
OIDs

RFC description

Manages Zhone voice signaling system parameters including hookflash timers.

Start monitoring Zhone Technologies integrated access device / voice gateway (voice-signaling profile/hookflash-timer config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZHONE-COM-VOICE-SIG-MIB