| OID symbolic | OID numeric | Type | Access | Description |
|---|
| zhoneCardDiagNextTable | 1.3.6.1.4.1.5504.3.3.5 | | not-accessible | Augment table of the unit/card resource but specific
to the diagnostic results information. This card
contains the index to create diagnostics table
entries (zhoneCardDiagEntry) which contains all the data
for executing and obtaining diagnostic results. |
| zhoneCardDiagNextEntry | 1.3.6.1.4.1.5504.3.3.5.1 | | not-accessible | This is the card diagnostics next index table which contains
all the data for:
- index for creating next zhoneCardDiagEntry. |
| I32 zhoneCardDiagNextIndex | 1.3.6.1.4.1.5504.3.3.5.1.1 | Integer32 | read-only | We allow ten diagnostic requests from multiple
interfaces.
The diagNextIndex represents the next available
diagnostic request handle for requesting a
diagnostic.
NOTE: this operates as a wrap-around counter starting
at 1 and wrapping around to 1 after reaching 10. |
| zhoneCardDiagTable | 1.3.6.1.4.1.5504.3.3.6 | | not-accessible | Augment table of the unit/card resource but specific
to the diagnostic results information. This is the card
diagnostics table which contains all the data for
executing and obtaining diagnostic results. |
| zhoneCardDiagEntry | 1.3.6.1.4.1.5504.3.3.6.1 | | not-accessible | This is the card diagnostics table which contains all the data for:
- invoking diagnostics,
- obtaining diagnostic results. |
| I32 zhoneCardDiagIndex | 1.3.6.1.4.1.5504.3.3.6.1.1 | Integer32 | not-accessible | We allow ten diagnostic requests from multiple
interfaces.
The diagIndex represents the diagnostic request to
start a diagnostic or obtain test results for a
completed diagnostic.
NOTE: this operates as a wrap-around counter starting
at 1 and wrapping around to 1 after reaching 10. |
| INT zhoneCardDiagType | 1.3.6.1.4.1.5504.3.3.6.1.2 | INTEGER | read-create | This field specifies the diagnostic to execute. The default
value is 'selftest'.
NOTE: not all of the individual diagnostics are available on
every Zhone card type.
NOTE: Zhone card types (cardZhoneType) are defined in the
genCardResources.mib
List of possible diagnostics:
============================
Common to all PLS cards
-----------------------
selftest(1)
- this diagnostic will execute all of the individual tests
available on this card.
Supports: diagStart, diagStop, diagRepetition.
cardEEprom(3)
- this diagnostic will verify the main card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
frbus(4)
- this diagnostic will verify that the BAN slot card can
access the Fhrame Bus by doing a loopback with 10 message
of 100 bytes.
Supports: diagStart, diagStop, diagRepetition.
backPlane(12)
- this diagnostic will verify that the BAN slot card can
access the back plane by verifying the back plane EEPROM
checksum.
Supports: diagStart, diagStop, diagRepetition.
cardZhoneType::infoServices(3) specific
---------------------------------------
supvBus(2)
- this diagnostic will verify that the BAN slot card can
access the supervisory Bus by doing a loopback of 20
bytes.
Supports: diagStart, diagStop, diagRepetition.
pcmcia(5)
- this diagnostic will verify that the InfoServ card can
access the PCMCIA flash card I/O by doing a file create,
write, and read of length 4000 bytes.
Supports: diagStart, diagStop, diagRepetition.
shelfLamp(6)
- this diagnostic will illuminate the shelf alarm indicators
for a period of 1.5 seconds. The indicators will return to
their original settings after the diagnostic completes.
Supports: diagStart, diagStop, diagRepetition.
realTimeClk(7)
- this diagnostic will verify that the real time clock
increments.
Supports: diagStart, diagStop, diagRepetition.
fanTray(8)
- this diagnostic tests that the fan tray is operational by
verifying the fan tray EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
shelfMonitor(9)
- this diagnostic tests the shelf monitor board is operational
by checking the POST status register and verifying the shelf
monitor board EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
midPlane(13)
- this diagnostic will verify that the mid plane card is present
by verifying the mid plane card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
cardZhoneType::vasp(5) specific
---------------------------------
ioCard(10)
- this diagnostic will verify that the I/O card is present by
verifying the I/O card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
mezzanineCard(11)
- this diagnostic will test that the mezzanine card is operational
by verifying the mezzanine card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
cardZhoneType::t3Tdm(6) specific
---------------------------------
ioCard(10)
- this diagnostic will verify that the I/O card is present by
verifying the I/O card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
midPlane(13)
- this diagnostic will verify that the mid plane card is present
by verifying the mid plane card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
cardZhoneType::ethernet(9) specific
-----------------------------------
midPlane(13)
- this diagnostic will verify that the mid plane card is present
by verifying the mid plane card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
cardZhoneType::hdsl2(10) specific
---------------------------------
ioCard(10)
- this diagnostic will verify that the I/O card is present by
verifying the I/O card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition.
mezzanineCard(11)
- this diagnostic will test that the mezzanine card is operational
by verifying the mezzanine card EEPROM checksum.
Supports: diagStart, diagStop, diagRepetition. |
| ZHO zhoneCardDiagAction | 1.3.6.1.4.1.5504.3.3.6.1.3 | ZhoneDiagAction | read-create | The diagAction field represents the diagnostic
operation to execute. Current supported actions are
as follows:
diagStart : begin diagnostics and initialize results.
diagStop : stop diagnostics if not yet complete.
diagSuspend: suspend diagnostics at current point.
diagResume : resume diagnostics from point of
suspension. |
| I32 zhoneCardDiagRepetition | 1.3.6.1.4.1.5504.3.3.6.1.4 | Integer32 | read-create | This field specifies the number of repetitions of diagnostics to execute.
The default value is 1.
NOTE: this field operates as an OR with the diagDuration field. If this
field is set to non-zero then the diagnostics will be executed
that amount of repetitions. |
| I32 zhoneCardDiagDuration | 1.3.6.1.4.1.5504.3.3.6.1.5 | Integer32 | read-create | This field specifies the duration of diagnostics to execute. The default
value is 60 seconds.
NOTE: this field operates as an OR with the diagRepetition field. If this
field is set to non-zero then the diagnostics will be executed that
amount of time. |
| ZHO zhoneCardDiagResult | 1.3.6.1.4.1.5504.3.3.6.1.6 | ZhoneDiagResult | read-only | This represents the overall diagnostic result. |
| C32 zhoneCardDiagPassCount | 1.3.6.1.4.1.5504.3.3.6.1.7 | Counter32 | read-only | The number of diagnostics that executed successfully. |
| C32 zhoneCardDiagFailCount | 1.3.6.1.4.1.5504.3.3.6.1.8 | Counter32 | read-only | The number of diagnostics that have failed. |
| OCT zhoneCardDiagDetails | 1.3.6.1.4.1.5504.3.3.6.1.9 | OCTET STRING | read-only | The failure reason, if any, for the last diagnostic which has executed.
NOTE: An empty string indicates that no additional information is available. |
| DAT zhoneCardDiagStartTime | 1.3.6.1.4.1.5504.3.3.6.1.10 | DateAndTime | read-only | Starting date and time of last selftest execution. |
| DAT zhoneCardDiagEndTime | 1.3.6.1.4.1.5504.3.3.6.1.11 | DateAndTime | read-only | Ending date and time of last selftest execution. |
| ZHO zhoneCardDiagRowStatus | 1.3.6.1.4.1.5504.3.3.6.1.12 | ZhoneRowStatus | read-create | In any case where a new row can be created either via
the cli or zms there will always be a proprietary mib
entity of type ZhoneRowStatus which has the basic
equivalence of the standard rowstatus object_id. |
| zhoneTacTestTable | 1.3.6.1.4.1.5504.3.3.7 | | not-accessible | This table contains one entry for each tac
test channel available on Zhone devices. In the
initial release only the primary channel (1) is
supported. Future line cards may support the
second channel. If the second channel is supported
the row will be populated, if the second channel
is not supported a get will return no such instance. |
| zhoneTacTestEntry | 1.3.6.1.4.1.5504.3.3.7.1 | | not-accessible | One row per tac test channel. |
| I32 zhoneTacIndex | 1.3.6.1.4.1.5504.3.3.7.1.1 | Integer32 | not-accessible | This field is the index field for the tac test
channel which will be connected on the external
port. This device supports a maximum of two channels,
one or both channels may be supported by a device
depending on which lines cards are installed. |
| NUM zhoneTacInterfaceIndex | 1.3.6.1.4.1.5504.3.3.7.1.2 | InterfaceIndexOrZero | read-write | This field contains the InterfaceIndex of the physical line to
be tested. If no line is currently being tested this
value is 0.
The ability of a physical line type to support tac test may
vary depending on the line cards installed and the external test
equipment.
This field may not be modified when an tac test is
in progress as indicated by a non-zero value in this field
and the test mode set to one of tacModeLookIn, tacModeLookOut
or tacModeBridge |
| INT zhoneTacTestMode | 1.3.6.1.4.1.5504.3.3.7.1.3 | INTEGER | read-write | This field is used to set the mtac test mode for a
given line. The options are:
mtacModeBridge - All traffic on the given line is bridged
across the mtac lines
mtacModeLookIn - All outbound traffic on the given line originates
exclusively to the mtac lines
mtacModeLookIn - All inbound traffic on the given line originates
exclusively to the mtac lines
mtacModeNone - No mtac test is in progress.
The mtac test mode may be changed only if the zhoneInterfaceIndex
is set, Otherwise it defaults to mtacModeNone.
And can be changed again by setting InterfaceIndex to non-zero values. |
| INT zhoneTacTestId | 1.3.6.1.4.1.5504.3.3.7.1.4 | INTEGER | read-write | This object is only valid for Tac Cards which
support the new Legerity Suite of tests.
This object identifies which test is to
be run, or can be set to abort the current test.
Test results are sent to the zhoneTacTestResultsTable.
There are 3 Legerity software packages: Basic Test (VCP-BT),
Advanced Test (VCP-AT), and Advanced Test Plus (VCP-ATP).
We currently support Basic Test package.
The following lists which tests are supported in each
software package.
Calibration VCP-ATP
Foreign DC Voltage Test VCP-BT, VCP-AT, VCP-ATP
Foreign AC VoltageTest VCP-BT, VCP-AT, VCP-ATP
DC Loop Resistance Test VCP-BT, VCP-AT, VCP-ATP
Three-Element Insulation Resistance Test VCP-BT, VCP-AT, VCP-ATP
Five-Element Insulation Resistance Test VCP-ATP
Three-Element Capacitance Test VCP-BT, VCP-AT
Receiver Off-Hook Test VCP-BT, VCP-AT, VCP-ATP
Distance to Open Test VCP-BT, VCP-AT
Foreign AC Currents Test VCP-BT, VCP-AT
Ringer Equivalency Number Test VCP-BT, VCP-AT, VCP-ATP
DTMF and Pulse Digit Measurement Test VCP-BT, VCP-AT
Noise Measurement Test VCP-BT, VCP-AT, VCP-ATP
Signal to Noise Ratio Test VCP-ATP
Arbitrary Single Tone Measurement Test VCP-ATP
Tone Generation Test VCP-BT, VCP-AT
Trans-Hybrid Loss Test VCP-BT, VCP-AT, VCP-ATP
Draw and Break Dial Tone Test VCP-BT, VCP-AT
Inward Current Test VCP-ATP
DC Feed Self-Test VCP-BT, VCP-AT, VCP-ATP
On/Off Hook Self-Test VCP-BT, VCP-AT, VCP-ATP
Ringing Self-Test VCP-BT, VCP-AT, VCP-ATP
Ringing Monitor Test VCP-BT, VCP-AT, VCP-ATP
Metering Self-Test VCP-BT, VCP-AT
Transmission Self-Test VCP-BT, VCP-AT, VCP-ATP
Dialing Sef Test VCP-BT, VCP-AT
Howler Test VCP-BT, VCP-AT
Fuse Test VCP-ATP
Read Loop and Battery Conditions VCP-BT, VCP-AT, VCP-ATP |
| INT zhoneTacTestParam1 | 1.3.6.1.4.1.5504.3.3.7.1.5 | INTEGER | read-write | Optional Test Parameter #1 |
| INT zhoneTacTestParam2 | 1.3.6.1.4.1.5504.3.3.7.1.6 | INTEGER | read-write | Optional Test Paramerter #2 |
| INT zhoneTacTestParam3 | 1.3.6.1.4.1.5504.3.3.7.1.7 | INTEGER | read-write | Optional Test Parameter #3 |
| INT zhoneTacTestParam4 | 1.3.6.1.4.1.5504.3.3.7.1.8 | INTEGER | read-write | Optional Test Parameter #4 |
| INT zhoneTacTestParam5 | 1.3.6.1.4.1.5504.3.3.7.1.9 | INTEGER | read-write | Optional Test Parameter #5
Value:
0x00000001 Force Line-Test mode |
| zhoneTacTestResultsTable | 1.3.6.1.4.1.5504.3.3.12 | | not-accessible | Table of Tac Test Results objects. Indexed by same index
as zhoneTacTestTable.
This table is only valid for Tac cards which support
the Legerity Suite of tests. |
| zhoneTacTestResultsEntry | 1.3.6.1.4.1.5504.3.3.12.1 | | not-accessible | Entry of Test Results objects. Indexed by same index
as zhoneTacTestEntry.
This entry is only valid for Tac cards which support
the Legerity Suite of tests. |
| TIK zhoneTacTestResultsTimeStarted | 1.3.6.1.4.1.5504.3.3.12.1.1 | TimeTicks | read-only | Description. |
| TIK zhoneTacTestResultsTimeEnded | 1.3.6.1.4.1.5504.3.3.12.1.2 | TimeTicks | read-only | Description. |
| INT zhoneTacTestResultStatus | 1.3.6.1.4.1.5504.3.3.12.1.3 | INTEGER | read-only | Contains test results. |
| OCT zhoneTacTestResultsOutput | 1.3.6.1.4.1.5504.3.3.12.1.4 | OCTET STRING | read-only | For Legerity Test Suite, results of test(s) are
output to this object as one string, separated by
UNIX '/n' for newline characters and terminated by
the NULL character.
This test results will persist until the next test
is run or until tac card reboot. |
| zhoneTacTestTraps | 1.3.6.1.4.1.5504.3.3.13 | | | Traps for the tac system. |
| zhoneRingerTraps | 1.3.6.1.4.1.5504.3.3.13.0 | | | Traps associated with ring generator.
Traps should be added below - the .0
on this entry is required. |
| NTF zhoneRingerStatusAlarm | 1.3.6.1.4.1.5504.3.3.13.0.1 | | | This trap occurs when a ring signal fails to be detected,
or when it re-starts after failure. |
| NTF zhoneRingerBusFaultAlarm | 1.3.6.1.4.1.5504.3.3.13.0.2 | | | This trap occurs when a fault in the ringer power bus is
detected. Such fault may be caused by the possible shortage
in the POTS or DSL line. |
| zhoneCardDiagnosticsModule | 1.3.6.1.4.1.5504.6.11 | | | Contains the diagnostics and results available on a per card or resource basis. |
| zhoneCardDiagObjects | 1.3.6.1.4.1.5504.6.11.1 | | | This group contains objects associated with Zhone Card
Diagnostics |
| zhoneTacTestObjects | 1.3.6.1.4.1.5504.6.11.2 | | | This group contains objects associated with initiating
tac tests |
