ZHONE-CARD-DIAGNOSTICS-MIB :: zhoneTacInterfaceIndex

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZHONE-CARD-DIAGNOSTICS-MIB › zhoneTacInterfaceIndex

zhoneTacInterfaceIndex

Module: ZHONE-CARD-DIAGNOSTICS-MIB

OID (symbolic): ZHONE-CARD-DIAGNOSTICS-MIB::zhoneTacInterfaceIndex

OID (numeric): 1.3.6.1.4.1.5504.3.3.7.1.2

Node type: OBJECT-TYPE

Type: InterfaceIndexOrZero

Access: read-write

Description: This field contains the InterfaceIndex of the physical line to be tested. If no line is currently being tested this value is 0.

The ability of a physical line type to support tac test may vary depending on the line cards installed and the external test equipment.

This field may not be modified when an tac test is in progress as indicated by a non-zero value in this field and the test mode set to one of tacModeLookIn, tacModeLookOut or tacModeBridge

What is zhoneTacInterfaceIndex?

Read-write InterfaceIndexOrZero identifying the physical line under test by a TAC (test access channel) session; it reads 0 when no line is currently being tested, and cannot be changed while a test is actively running (nonzero value with test mode set to lookIn/lookOut/bridge).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.3.3.7.1.2
snmpwalk -v2c -c public <target> ZHONE-CARD-DIAGNOSTICS-MIB::zhoneTacInterfaceIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.3.3.7.1.2.1
snmpget -v2c -c public <target> ZHONE-CARD-DIAGNOSTICS-MIB::zhoneTacInterfaceIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.3.3.7.1.2.1 s <value>

Start monitoring Zhone access/aggregation shelf, line cards (per-card diagnostic-test pass/fail status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-CARD-DIAGNOSTICS-MIB::zhoneTacInterfaceIndex OID value, configure state conditions and alerts, and monitor any Zhone access/aggregation shelf, line cards (per-card diagnostic-test pass/fail status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.3zhoneGenericZhone
1.3.6.1.4.1.5504.3.3zhoneCardZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.3.3.7zhoneTacTestTableZHONE-CARD-DIAGNOSTICS-MIB
1.3.6.1.4.1.5504.3.3.7.1zhoneTacTestEntryZHONE-CARD-DIAGNOSTICS-MIB
1.3.6.1.4.1.5504.3.3.7.1.2zhoneTacInterfaceIndexZHONE-CARD-DIAGNOSTICS-MIB