All MIBs › XYLAN-M013-MIB
Category: Xylan OmniSwitch
Description: Provides Xylan OmniSwitch M013 module-specific management objects for hardware configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is XYLAN-M013-MIB?
This proprietary MIB from Xylan Corporation provides management objects specific to the M013 line/interface module used in OmniSwitch chassis-based switches. It exposes hardware configuration objects for that particular module type, letting administrators manage module-specific settings that aren't covered by generic switch MIBs. Its main monitoring value is hardware status and configuration of the M013 module itself within the switch chassis, such as confirming the module is correctly configured and operating as expected. It likely works alongside broader Xylan chassis/module inventory MIBs rather than any IETF standard. It is deployed on Xylan OmniSwitch chassis systems equipped with the M013 module. Engineers can download the XYLAN-M013-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in XYLAN-M013-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Xylan OmniSwitch chassis switch with M013 module
Monitoring Examples
An administrator would check the M013 module's configuration objects to confirm port or interface settings specific to that module type match the intended deployment. Because no concrete sample object names were supplied for this MIB, this scenario is based on the short description rather than actual OIDs.
What Can Be Monitored
- M013 module configuration
- module-specific hardware settings
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress |
From RFC1213-MIB
| DisplayString |
From XYLAN-BASE-MIB
| xylanM013Arch | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| m013ProvisioningGroup | 1.3.6.1.4.1.800.2.25.1 | |||
| m013ProvisioningTable | 1.3.6.1.4.1.800.2.25.1.1 | not-accessible | A table of provisioning configuration data used to configure an HDLC interface on a DS3 connection. | |
| m013ProvisioningEntry | 1.3.6.1.4.1.800.2.25.1.1.1 | not-accessible | An entry in the table, containing information about provisioning an HDLC channel on a DS3 connection. | |
| INT m013SlotIndex | 1.3.6.1.4.1.800.2.25.1.1.1.1 | INTEGER | read-only | Slot for channel being provisioned. |
| INT m013LogicalPortIndex | 1.3.6.1.4.1.800.2.25.1.1.1.2 | INTEGER | read-only | A per-slot unique HDLC channel number. |
| STR m013Description | 1.3.6.1.4.1.800.2.25.1.1.1.3 | DisplayString | read-write | A user description of this channel. |
| INT m013Ds3PortIndex | 1.3.6.1.4.1.800.2.25.1.1.1.4 | INTEGER | read-write | Physical DS3 port for channel being provisioned. |
| INT m013Ds1Fraction | 1.3.6.1.4.1.800.2.25.1.1.1.5 | INTEGER | read-write | The DS1 channel within the DS3 circuit that is used to create this HDLC channel. An entry of 0 indicates this is a clear channel (full DS3 bandwidth) connection. |
| INT m013Ds0Mask | 1.3.6.1.4.1.800.2.25.1.1.1.6 | INTEGER | read-write | This is a bit mask of the DS0 channels within the selected DS1 fraction that make up the desired HDLC channel. If m013Ds1Fraction is 0 this value has no meaning |
| INT m013IfIndex | 1.3.6.1.4.1.800.2.25.1.1.1.7 | INTEGER | read-only | A per-switch unique number for this HDLC channel. This number is a combination of Slot and Logical Port numbers. |
| INT m013Protocol | 1.3.6.1.4.1.800.2.25.1.1.1.8 | INTEGER | read-write | The L2 protocol that is used on this HDLC channel. |
| INT m013EntryStatus | 1.3.6.1.4.1.800.2.25.1.1.1.9 | INTEGER | read-write | Value used for the control of the creation of this interface. |
| m013ServiceGroup | 1.3.6.1.4.1.800.2.25.2 | |||
| m013ServiceTable | 1.3.6.1.4.1.800.2.25.2.1 | not-accessible | A table of M013 services status and parameter information. | |
| m013ServiceEntry | 1.3.6.1.4.1.800.2.25.2.1.1 | not-accessible | An entry in the table, containing information about the M013 services. | |
| INT m013ServiceSlotIndex | 1.3.6.1.4.1.800.2.25.2.1.1.1 | INTEGER | read-write | A unique value which identifies this HSM board slot. |
| INT m013ServiceLogicalPortIndex | 1.3.6.1.4.1.800.2.25.2.1.1.2 | INTEGER | read-write | A per-slot unique value which identifies this HDLC logical port. |
| INT m013ServiceNumber | 1.3.6.1.4.1.800.2.25.2.1.1.3 | INTEGER | read-only | The unique service number for this particular slot/logical port. |
| INT m013ServiceTableEntryType | 1.3.6.1.4.1.800.2.25.2.1.1.4 | INTEGER | read-write | The type of table entry for this M013 Serivce. A static entry is one that is stored in non-volatile memory. A dynamic entry is one that is automatically created for an unconfigured virtual circuit based on the the type of service (bridging or trunking) and whether a default VLAN is defined for the type of service. Changing the value via a write command from dynamic to static will cause the table entry to be stored into non-volatile memory. Setting a value of dynamic is not allowed. |
| STR m013ServiceDescription | 1.3.6.1.4.1.800.2.25.2.1.1.5 | DisplayString | read-write | A description for this M013 service. |
| INT m013ServiceType | 1.3.6.1.4.1.800.2.25.2.1.1.6 | INTEGER | read-write | The service type. |
| INT m013ServiceOperStatus | 1.3.6.1.4.1.800.2.25.2.1.1.7 | INTEGER | read-only | The service operational status. |
| INT m013ServiceAdminStatus | 1.3.6.1.4.1.800.2.25.2.1.1.8 | INTEGER | read-write | The service adminstration status. |
| INT m013ServiceVirtualCircuit | 1.3.6.1.4.1.800.2.25.2.1.1.9 | INTEGER | read-write | The virtual circuit for this service. In case of PPP it should be set to zero, in case of Frame Relay - to the appropriate DLCI value. |
| OCT m013ServiceVlans | 1.3.6.1.4.1.800.2.25.2.1.1.10 | OCTET STRING | read-write | The Vlans for this service. Interpret this as a 16 bit field per vlan: Trunking 1-32, Bridging 1, IP 1 |
| INT m013ServiceBridgingMode | 1.3.6.1.4.1.800.2.25.2.1.1.11 | INTEGER | read-write | The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY |
| m013FrxPortGroup | 1.3.6.1.4.1.800.2.25.3 | |||
| m013FrxPortTable | 1.3.6.1.4.1.800.2.25.3.1 | not-accessible | A table of port layer status and parameter information for the UNI's logical interface. | |
| m013FrxPortEntry | 1.3.6.1.4.1.800.2.25.3.1.1 | not-accessible | An entry in the table, containing information about the logical layer of a UNI interface. | |
| INT m013FrxPortSlotIndex | 1.3.6.1.4.1.800.2.25.3.1.1.1 | INTEGER | read-only | A unique value which identifies this HSM board slot. |
| INT m013FrxPortPortIndex | 1.3.6.1.4.1.800.2.25.3.1.1.2 | INTEGER | read-only | A per-slot unique value which identifies this HDLC logical port. |
| STR m013FrxPortDescription | 1.3.6.1.4.1.800.2.25.3.1.1.3 | DisplayString | read-write | A description for this Frame Relay port. |
| INT m013FrxPortAdminStatus | 1.3.6.1.4.1.800.2.25.3.1.1.4 | INTEGER | read-write | If set to enabled, enables Frame Relay Interface. If set to disabled, disables Frame Relay Interface |
| INT m013FrxPortDefaultIpRoutingAdminStatus | 1.3.6.1.4.1.800.2.25.3.1.1.5 | INTEGER | read-write | If set to enabled, enables Default IP Routing. If set to disabled, disables Default IP Routing |
| INT m013FrxPortDefaultBridgingAdminStatus | 1.3.6.1.4.1.800.2.25.3.1.1.6 | INTEGER | read-write | If set to enabled, enables Default Bridging. If set to disabled, disables Default Bridging. |
| INT m013FrxPortDefaultBridgingVLAN | 1.3.6.1.4.1.800.2.25.3.1.1.7 | INTEGER | read-write | The default VLAN for new PVCs that have not been configured for the Bridging Service. A value of zero(0) indicates that unconfigured VCs will not perform a bridging service and will discard all bridged format frames received or transmitted. A non-zero value indicates the bridging VLAN to be used if the network informs the port of a new VC. |
| INT m013FrxPortDefaultBridgingMode | 1.3.6.1.4.1.800.2.25.3.1.1.8 | INTEGER | read-write | The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY |
| INT m013FrxPortDynamicVCCreation | 1.3.6.1.4.1.800.2.25.3.1.1.9 | INTEGER | read-write | If set to enabled, enables Dynamic VC creation. If set to disabled, disables Dynamic VC creation. |
| m013FrxVcControlGroup | 1.3.6.1.4.1.800.2.25.4 | |||
| m013FrxVcControlTable | 1.3.6.1.4.1.800.2.25.4.1 | not-accessible | A table of Frame Relay virtual circuit configuration and control information. | |
| m013FrxVcControlEntry | 1.3.6.1.4.1.800.2.25.4.1.1 | not-accessible | An entry in the table, containing information about the Frame Relay virtual circuit statistics. | |
| INT m013FrxVcControlSlotIndex | 1.3.6.1.4.1.800.2.25.4.1.1.1 | INTEGER | read-only | A unique value which identifies this HSM board slot. |
| INT m013FrxVcControlPortIndex | 1.3.6.1.4.1.800.2.25.4.1.1.2 | INTEGER | read-only | A per-slot unique value which identifies this HDLC logical port. |
| INT m013FrxVcControlDlci | 1.3.6.1.4.1.800.2.25.4.1.1.3 | INTEGER | read-only | A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit. |
| INT m013FrxVcControlIpRoutingAdminStatus | 1.3.6.1.4.1.800.2.25.4.1.1.4 | INTEGER | read-write | If set to enabled, enables IP Routing. If set to disabled, disables IP Routing |
| m013FrxVcStatsGroup | 1.3.6.1.4.1.800.2.25.5 | |||
| m013FrxVcStatsTable | 1.3.6.1.4.1.800.2.25.5.1 | not-accessible | A table of Frame Relay virtual circuit statistics information. | |
| m013FrxVcStatsEntry | 1.3.6.1.4.1.800.2.25.5.1.1 | not-accessible | An entry in the table, containing information about the Frame Relay virtual circuit statistics. | |
| INT m013FrxVcStatsSlotIndex | 1.3.6.1.4.1.800.2.25.5.1.1.1 | INTEGER | read-only | A unique value which identifies this HSM board slot. |
| INT m013FrxVcStatsPortIndex | 1.3.6.1.4.1.800.2.25.5.1.1.2 | INTEGER | read-only | A per-slot unique value which identifies this HDLC logical port. |
| INT m013FrxVcStatsDlci | 1.3.6.1.4.1.800.2.25.5.1.1.3 | INTEGER | read-only | A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit. |
| CTR m013FrxVcStatsTxIPOctets | 1.3.6.1.4.1.800.2.25.5.1.1.4 | Counter | read-only | The total number of transmitted octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit. |
| CTR m013FrxVcStatsTxIPFrames | 1.3.6.1.4.1.800.2.25.5.1.1.5 | Counter | read-only | The total number of transmitted routed IP format frames on this virtual circuit. |
| CTR m013FrxVcStatsRxIPOctets | 1.3.6.1.4.1.800.2.25.5.1.1.6 | Counter | read-only | The total number of received octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit. |
| CTR m013FrxVcStatsRxIPFrames | 1.3.6.1.4.1.800.2.25.5.1.1.7 | Counter | read-only | The total number of received routed IP format frames on this virtual circuit. |
| CTR m013FrxVcStatsTxIPXOctets | 1.3.6.1.4.1.800.2.25.5.1.1.8 | Counter | read-only | The total number of transmitted octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit. |
| CTR m013FrxVcStatsTxIPXFrames | 1.3.6.1.4.1.800.2.25.5.1.1.9 | Counter | read-only | The total number of transmitted routed IPX format frames on this virtual circuit. |
| CTR m013FrxVcStatsRxIPXOctets | 1.3.6.1.4.1.800.2.25.5.1.1.10 | Counter | read-only | The total number of received octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit. |
| CTR m013FrxVcStatsRxIPXFrames | 1.3.6.1.4.1.800.2.25.5.1.1.11 | Counter | read-only | The total number of received routed IPX format frames on this virtual circuit. |
| CTR m013FrxVcStatsTxBPDUOctets | 1.3.6.1.4.1.800.2.25.5.1.1.12 | Counter | read-only | The total number of transmitted octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit. |
| CTR m013FrxVcStatsTxBPDUFrames | 1.3.6.1.4.1.800.2.25.5.1.1.13 | Counter | read-only | The total number of transmitted BPDU frames on this virtual circuit. |
| CTR m013FrxVcStatsRxBPDUOctets | 1.3.6.1.4.1.800.2.25.5.1.1.14 | Counter | read-only | The total number of received octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit. |
| CTR m013FrxVcStatsRxBPDUFrames | 1.3.6.1.4.1.800.2.25.5.1.1.15 | Counter | read-only | The total number of received BPDU frames on this virtual circuit. |
| CTR m013FrxVcStatsTxEthernetOctets | 1.3.6.1.4.1.800.2.25.5.1.1.16 | Counter | read-only | The total number of transmitted octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit. |
| CTR m013FrxVcStatsTxEthernetFrames | 1.3.6.1.4.1.800.2.25.5.1.1.17 | Counter | read-only | The total number of transmitted bridged 802.3 format frames on this virtual circuit. |
| CTR m013FrxVcStatsRxEthernetOctets | 1.3.6.1.4.1.800.2.25.5.1.1.18 | Counter | read-only | The total number of received octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit. |
| CTR m013FrxVcStatsRxEthernetFrames | 1.3.6.1.4.1.800.2.25.5.1.1.19 | Counter | read-only | The total number of received bridged 802.3 format frames on this virtual circuit. |
| CTR m013FrxVcStatsTx8025Octets | 1.3.6.1.4.1.800.2.25.5.1.1.20 | Counter | read-only | The total number of transmitted octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit. |
| CTR m013FrxVcStatsTx8025Frames | 1.3.6.1.4.1.800.2.25.5.1.1.21 | Counter | read-only | The total number of transmitted 8025 frames on this virtual circuit. |
| CTR m013FrxVcStatsRx8025Octets | 1.3.6.1.4.1.800.2.25.5.1.1.22 | Counter | read-only | The total number of received octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit. |
| CTR m013FrxVcStatsRx8025Frames | 1.3.6.1.4.1.800.2.25.5.1.1.23 | Counter | read-only | The total number of received 8025 frames on this virtual circuit. |
| CTR m013FrxVcStatsTxFDDIOctets | 1.3.6.1.4.1.800.2.25.5.1.1.24 | Counter | read-only | The total number of transmitted octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit. |
| CTR m013FrxVcStatsTxFDDIFrames | 1.3.6.1.4.1.800.2.25.5.1.1.25 | Counter | read-only | The total number of transmitted FDDI frames on this virtual circuit. |
| CTR m013FrxVcStatsRxFDDIOctets | 1.3.6.1.4.1.800.2.25.5.1.1.26 | Counter | read-only | The total number of received octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit. |
| CTR m013FrxVcStatsRxFDDIFrames | 1.3.6.1.4.1.800.2.25.5.1.1.27 | Counter | read-only | The total number of received FDDI frames on this virtual circuit. |
| m013PppxConfigGroup | 1.3.6.1.4.1.800.2.25.6 | |||
| m013PppxConfigTable | 1.3.6.1.4.1.800.2.25.6.1 | not-accessible | A table of PPP protocol entity configuration information. | |
| m013PppxConfigEntry | 1.3.6.1.4.1.800.2.25.6.1.1 | not-accessible | An entry in the PPP Entity Configuration table, containing information about PPP protocol configuration. | |
| INT m013PppxConfigSlotIndex | 1.3.6.1.4.1.800.2.25.6.1.1.1 | INTEGER | read-only | A unique value which identifies this HSM board slot. |
| INT m013PppxConfigPortIndex | 1.3.6.1.4.1.800.2.25.6.1.1.2 | INTEGER | read-only | A per-slot unique value which identifies this HDLC logical port. |
| STR m013PppxConfigDescription | 1.3.6.1.4.1.800.2.25.6.1.1.3 | DisplayString | read-write | A description for this PPP port. |
| INT m013PppxConfigAdminStatus | 1.3.6.1.4.1.800.2.25.6.1.1.4 | INTEGER | read-write | This object controls the Administrative Status of this PPP Entity. Enabled will allow the PPP Entity to operate. Disabled will disable the PPP Entity without deleting it. Delete will disable the PPP entity and delete the PPP configuration record. |
| INT m013PppxConfigMode | 1.3.6.1.4.1.800.2.25.6.1.1.5 | INTEGER | read-write | This object controls whether or not Multilink PPP will be used. |
| INT m013PppxConfigIpConfigAdminStatus | 1.3.6.1.4.1.800.2.25.6.1.1.6 | INTEGER | read-write | The immediate desired status of the IP network protocol. Setting this object to open will inject an administrative open event into the IP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| INT m013PppxConfigBcpConfigAdminStatus | 1.3.6.1.4.1.800.2.25.6.1.1.7 | INTEGER | read-write | The immediate desired status of the BCP network protocol. Setting this object to open will inject an administrative open event into the BCP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| INT m013PppxConfigIpxConfigAdminStatus | 1.3.6.1.4.1.800.2.25.6.1.1.8 | INTEGER | read-write | The immediate desired status of the IPX network protocol. Setting this object to open will inject an administrative open event into the IPX network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| IP m013PppxConfigRemoteIpAddress | 1.3.6.1.4.1.800.2.25.6.1.1.9 | IpAddress | read-write | The Remote IP address of the PPP connection. If set to 0.0.0.0 and IP routing is enabled then the IP address will be learned during the IP LCP negotiation. If set to a value then no IP address negotiation will occur. |
| INT m013PppxConfigAuthenticationType | 1.3.6.1.4.1.800.2.25.6.1.1.10 | INTEGER | read-write | The desired Authentication protocol to use for this PPP connection. |
| STR m013PppxConfigUserIdToRemote | 1.3.6.1.4.1.800.2.25.6.1.1.11 | DisplayString | read-write | User ID sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur. |
| STR m013PppxConfigPasswordToRemote | 1.3.6.1.4.1.800.2.25.6.1.1.12 | DisplayString | read-write | Password sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur. |
| STR m013PppxConfigUserIdFromRemote | 1.3.6.1.4.1.800.2.25.6.1.1.13 | DisplayString | read-write | User ID expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required. |
| STR m013PppxConfigPasswordFromRemote | 1.3.6.1.4.1.800.2.25.6.1.1.14 | DisplayString | read-write | Password expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required. |
| INT m013PppxConfigMaxFailureCount | 1.3.6.1.4.1.800.2.25.6.1.1.15 | INTEGER | read-write | PPP LCP and NCP Negotiation Maximum Failure Count |
| INT m013PppxConfigMaxConfigureCount | 1.3.6.1.4.1.800.2.25.6.1.1.16 | INTEGER | read-write | PPP LCP Negotiation Maximum Configure Count |
| INT m013PppxConfigMaxTerminateCount | 1.3.6.1.4.1.800.2.25.6.1.1.17 | INTEGER | read-write | PPP LCP Negotiation Maximum Terminate Count |
| INT m013PppxConfigRetryTimeout | 1.3.6.1.4.1.800.2.25.6.1.1.18 | INTEGER | read-write | PPP LCP Negotiation Retry Timeout |
| m013PppxCpGroup | 1.3.6.1.4.1.800.2.25.7 | |||
| m013PppxCpTable | 1.3.6.1.4.1.800.2.25.7.1 | not-accessible | A table of PPP connection Link Control and Network Control Protocol status and statistics information. | |
| m013PppxCpEntry | 1.3.6.1.4.1.800.2.25.7.1.1 | not-accessible | An entry in the table, containing information about the PPP LCP and NCP status and statistics. | |
| INT m013PppxCpSlotIndex | 1.3.6.1.4.1.800.2.25.7.1.1.1 | INTEGER | read-only | A unique value which identifies this WSM board slot that the PPP Control Protocol Entity is running on. |
| INT m013PppxCpPortIndex | 1.3.6.1.4.1.800.2.25.7.1.1.2 | INTEGER | read-only | A per-slot unique value which identifies this HDLC logical port. |
| INT m013PppxCpIpOperStatus | 1.3.6.1.4.1.800.2.25.7.1.1.3 | INTEGER | read-only | The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state. |
| INT m013PppxCpIpxOperStatus | 1.3.6.1.4.1.800.2.25.7.1.1.4 | INTEGER | read-only | The operational status of the IPX network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state. |
| INT m013PppxCpBcpOperStatus | 1.3.6.1.4.1.800.2.25.7.1.1.5 | INTEGER | read-only | The operational status of the BCP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state. |
| CTR m013PppxCpTxLcpPackets | 1.3.6.1.4.1.800.2.25.7.1.1.6 | Counter | read-only | The total number of transmitted Link Control Protocol packets on this PPP connection. |
| CTR m013PppxCpRxLcpPackets | 1.3.6.1.4.1.800.2.25.7.1.1.7 | Counter | read-only | The total number of received Link Control Protocol packets on this PPP connection. |
| CTR m013PppxCpTxIpcpPackets | 1.3.6.1.4.1.800.2.25.7.1.1.8 | Counter | read-only | The total number of transmitted IP Control Protocol packets on this PPP connection. |
| CTR m013PppxCpRxIpcpPackets | 1.3.6.1.4.1.800.2.25.7.1.1.9 | Counter | read-only | The total number of received IP Control Protocol packets on this PPP connection. |
| CTR m013PppxCpTxIpxcpPackets | 1.3.6.1.4.1.800.2.25.7.1.1.10 | Counter | read-only | The total number of transmitted IPX Control Protocol packets on this PPP connection. |
| CTR m013PppxCpRxIpxcpPackets | 1.3.6.1.4.1.800.2.25.7.1.1.11 | Counter | read-only | The total number of received IPX Control Protocol packets on this PPP connection. |
| CTR m013PppxCpTxBcpPackets | 1.3.6.1.4.1.800.2.25.7.1.1.12 | Counter | read-only | The total number of transmitted Bridge Control Protocol packets on this PPP connection. |
| CTR m013PppxCpRxBcpPackets | 1.3.6.1.4.1.800.2.25.7.1.1.13 | Counter | read-only | The total number of received Bridge Control Protocol packets on this PPP connection. |
| m013PppxStatsGroup | 1.3.6.1.4.1.800.2.25.8 | |||
| m013PppxStatsTable | 1.3.6.1.4.1.800.2.25.8.1 | not-accessible | A table of PPP connection statistics information. | |
| m013PppxStatsEntry | 1.3.6.1.4.1.800.2.25.8.1.1 | not-accessible | An entry in the table, containing information about the PPP PPP connection statistics. | |
| INT m013PppxStatsSlotIndex | 1.3.6.1.4.1.800.2.25.8.1.1.1 | INTEGER | read-only | A unique value which identifies this HSM board slot that this PPP link is running on. |
| INT m013PppxStatsPortIndex | 1.3.6.1.4.1.800.2.25.8.1.1.2 | INTEGER | read-only | A per-slot unique value which identifies HDLC channel that this PPP link is running on. |
| CTR m013PppxStatsTxIPOctets | 1.3.6.1.4.1.800.2.25.8.1.1.3 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within routed IP format packets on this PPP connection. |
| CTR m013PppxStatsTxIPPackets | 1.3.6.1.4.1.800.2.25.8.1.1.4 | Counter | read-only | The total number of transmitted routed IP format packets on this PPP connection. |
| CTR m013PppxStatsRxIPOctets | 1.3.6.1.4.1.800.2.25.8.1.1.5 | Counter | read-only | The total number of received octets (including the PPP Header field) within routed IP format packets on this PPP connection. |
| CTR m013PppxStatsRxIPPackets | 1.3.6.1.4.1.800.2.25.8.1.1.6 | Counter | read-only | The total number of received routed IP format packets on this PPP connection. |
| CTR m013PppxStatsTxIPXOctets | 1.3.6.1.4.1.800.2.25.8.1.1.7 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within routed IPX format packets on this PPP connection. |
| CTR m013PppxStatsTxIPXPackets | 1.3.6.1.4.1.800.2.25.8.1.1.8 | Counter | read-only | The total number of transmitted routed IPX format packets on this PPP connection. |
| CTR m013PppxStatsRxIPXOctets | 1.3.6.1.4.1.800.2.25.8.1.1.9 | Counter | read-only | The total number of received octets (including the PPP Header field) within routed IPX format packets on this PPP connection. |
| CTR m013PppxStatsRxIPXPackets | 1.3.6.1.4.1.800.2.25.8.1.1.10 | Counter | read-only | The total number of received routed IPX format packets on this PPP connection. |
| CTR m013PppxStatsTxBPDUOctets | 1.3.6.1.4.1.800.2.25.8.1.1.11 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within BPDU packets on this PPP connection. |
| CTR m013PppxStatsTxBPDUPackets | 1.3.6.1.4.1.800.2.25.8.1.1.12 | Counter | read-only | The total number of transmitted BPDU packets on this PPP connection. |
| CTR m013PppxStatsRxBPDUOctets | 1.3.6.1.4.1.800.2.25.8.1.1.13 | Counter | read-only | The total number of received octets (including the PPP Header field) within BPDU packets on this PPP connection. |
| CTR m013PppxStatsRxBPDUPackets | 1.3.6.1.4.1.800.2.25.8.1.1.14 | Counter | read-only | The total number of received BPDU packets on this PPP connection. |
| CTR m013PppxStatsTxEthernetOctets | 1.3.6.1.4.1.800.2.25.8.1.1.15 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection. |
| CTR m013PppxStatsTxEthernetPackets | 1.3.6.1.4.1.800.2.25.8.1.1.16 | Counter | read-only | The total number of transmitted bridged 802.3 format packets on this PPP connection. |
| CTR m013PppxStatsRxEthernetOctets | 1.3.6.1.4.1.800.2.25.8.1.1.17 | Counter | read-only | The total number of received octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection. |
| CTR m013PppxStatsRxEthernetPackets | 1.3.6.1.4.1.800.2.25.8.1.1.18 | Counter | read-only | The total number of received bridged 802.3 format packets on this PPP connection. |
| CTR m013PppxStatsTx8025Octets | 1.3.6.1.4.1.800.2.25.8.1.1.19 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within 8025 packets on this PPP connection. |
| CTR m013PppxStatsTx8025Packets | 1.3.6.1.4.1.800.2.25.8.1.1.20 | Counter | read-only | The total number of transmitted 8025 packets on this PPP connection. |
| CTR m013PppxStatsRx8025Octets | 1.3.6.1.4.1.800.2.25.8.1.1.21 | Counter | read-only | The total number of received octets (including the PPP Header field) within 8025 packets on this PPP connection. |
| CTR m013PppxStatsRx8025Packets | 1.3.6.1.4.1.800.2.25.8.1.1.22 | Counter | read-only | The total number of received 8025 packets on this PPP connection. |
| CTR m013PppxStatsTxFDDIOctets | 1.3.6.1.4.1.800.2.25.8.1.1.23 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within FDDI packets on this PPP connection. |
| CTR m013PppxStatsTxFDDIPackets | 1.3.6.1.4.1.800.2.25.8.1.1.24 | Counter | read-only | The total number of transmitted FDDI packets on this PPP connection. |
| CTR m013PppxStatsRxFDDIOctets | 1.3.6.1.4.1.800.2.25.8.1.1.25 | Counter | read-only | The total number of received octets (including the PPP Header field) within FDDI packets on this PPP connection. |
| CTR m013PppxStatsRxFDDIPackets | 1.3.6.1.4.1.800.2.25.8.1.1.26 | Counter | read-only | The total number of received FDDI packets on this PPP connection. |
| m013IPRouterGroup | 1.3.6.1.4.1.800.2.25.9 | |||
| m013IPRouterIfTable | 1.3.6.1.4.1.800.2.25.9.1 | not-accessible | A list of M013 Router instances in this physical OmniSwitch. | |
| m013IPRouterIfEntry | 1.3.6.1.4.1.800.2.25.9.1.1 | not-accessible | A VLAN entry. | |
| INT m013IPRouterIfSlotIndex | 1.3.6.1.4.1.800.2.25.9.1.1.1 | INTEGER | read-only | Slot for channel being provisioned. |
| INT m013IPRouterIfLogicalPortIndex | 1.3.6.1.4.1.800.2.25.9.1.1.2 | INTEGER | read-only | A per-slot unique HDLC channel number. |
| IP m013IPRouterIfAddress | 1.3.6.1.4.1.800.2.25.9.1.1.3 | IpAddress | read-only | The IP address for this IP interface |
| IP m013IPRouterIfSubNetMask | 1.3.6.1.4.1.800.2.25.9.1.1.4 | IpAddress | read-write | The IP network subnet mask for this IP interface |
| IP m013IPRouterIfBcastAddress | 1.3.6.1.4.1.800.2.25.9.1.1.5 | IpAddress | read-write | The IP broadcast address for this IP interface |
| STR m013IPRouterIfDescription | 1.3.6.1.4.1.800.2.25.9.1.1.6 | DisplayString | read-write | Textual description of the router instance. |
| INT m013IPRouterIfAdmStatus | 1.3.6.1.4.1.800.2.25.9.1.1.7 | INTEGER | read-write | The particular routing environment can be enable(1) or disable(2) (or delete (3)) upon user's request. |
| INT m013IPRouterIfOperStatus | 1.3.6.1.4.1.800.2.25.9.1.1.8 | INTEGER | read-only | Provide operating status of a particular router envirnment. |
| INT m013IPRouterIfFramingType | 1.3.6.1.4.1.800.2.25.9.1.1.9 | INTEGER | read-write | Provides the ability to set the outbound frame type for IP traffic. The default frame type is Ethernet. If the frame type is incompatible with the transmitting media, appropriate translation will be performed at egress. |
| INT m013IPRouterIfMtu | 1.3.6.1.4.1.800.2.25.9.1.1.10 | INTEGER | read-write | Provides the ability to set the MTU size for this IP interface. The default size is 1500 |
| OCT m013IPRouterIfProtocol | 1.3.6.1.4.1.800.2.25.9.1.1.11 | OCTET STRING | read-write | The routing protocol(s) for this m013 router port. Which are: ipOther(1), ipRip(2), ipOspf(4), ipBgp(8), ipHello(16), ipIs-is(32) |
| m013Dsx3Group | 1.3.6.1.4.1.800.2.25.10 | |||
| m013Dsx3ConfigTable | 1.3.6.1.4.1.800.2.25.10.1 | not-accessible | The DS3 Configuration table. | |
| m013Dsx3ConfigEntry | 1.3.6.1.4.1.800.2.25.10.1.1 | not-accessible | An entry in the DS3 Configuration table. | |
| INT m013Dsx3LineIndex | 1.3.6.1.4.1.800.2.25.10.1.1.1 | INTEGER | read-only | This object is the identifier of a DS3 port on a managed device. |
| INT m013Dsx3ChannelizedMode | 1.3.6.1.4.1.800.2.25.10.1.1.2 | INTEGER | read-write | This object controls whether or not DS3 port is channelized. The default mode is enabled which means that this port is channelized to 28 T1s. |
| OCT m013Dsx3MdlEIC | 1.3.6.1.4.1.800.2.25.10.1.1.3 | OCTET STRING | read-write | MDL Equipment Identification Code (EIC). |
| OCT m013Dsx3MdlLIC | 1.3.6.1.4.1.800.2.25.10.1.1.4 | OCTET STRING | read-write | MDL Location Identification Code (LIC). |
| OCT m013Dsx3MdlFIC | 1.3.6.1.4.1.800.2.25.10.1.1.5 | OCTET STRING | read-write | MDL Frame Identification Code (FIC). |
| OCT m013Dsx3MdlUNIT | 1.3.6.1.4.1.800.2.25.10.1.1.6 | OCTET STRING | read-write | MDL Unit Identification Code (UNIT). |
| OCT m013Dsx3MdlPFI | 1.3.6.1.4.1.800.2.25.10.1.1.7 | OCTET STRING | read-write | MDL Path Facility Identification Code (PFI). |
| OCT m013Dsx3MdlPortIdleSignalCode | 1.3.6.1.4.1.800.2.25.10.1.1.8 | OCTET STRING | read-write | MDL Port Idle Signal Code |
| OCT m013Dsx3MdlGenerator | 1.3.6.1.4.1.800.2.25.10.1.1.9 | OCTET STRING | read-write | MDL Generator. |
| INT m013Dsx3MdlTransmitPath | 1.3.6.1.4.1.800.2.25.10.1.1.10 | INTEGER | read-write | Enables the MDL path message transmission. |
| INT m013Dsx3MdlTransmitIdleSignal | 1.3.6.1.4.1.800.2.25.10.1.1.11 | INTEGER | read-write | Enables the MDL idle signal message transmission. |
| INT m013Dsx3MdlTransmitTestSignal | 1.3.6.1.4.1.800.2.25.10.1.1.12 | INTEGER | read-write | Enables the MDL test signal message transmission. |
| INT m013Dsx3FEACEnable | 1.3.6.1.4.1.800.2.25.10.1.1.13 | INTEGER | read-write | Allows the DS3 to send the following alarms on the FEAC channel when detected locally: - DS3 Equipment Failure - LOS - OOF - AIS Received . |
| INT m013Dsx3REIEnable | 1.3.6.1.4.1.800.2.25.10.1.1.14 | INTEGER | read-write | Allows the DS3 to send Remote Error Indications. |
| INT m013Dsx3RxMdlEnable | 1.3.6.1.4.1.800.2.25.10.1.1.15 | INTEGER | read-write | Allows the DS3 to receive MDL messages. |
| OCT m013Dsx3RxMdlEIC | 1.3.6.1.4.1.800.2.25.10.1.1.16 | OCTET STRING | read-write | Received MDL Equipment Identification Code (EIC). |
| OCT m013Dsx3RxMdlLIC | 1.3.6.1.4.1.800.2.25.10.1.1.17 | OCTET STRING | read-write | Received MDL Location Identification Code (LIC). |
| OCT m013Dsx3RxMdlFIC | 1.3.6.1.4.1.800.2.25.10.1.1.18 | OCTET STRING | read-write | Received MDL Frame Identification Code (FIC). |
| OCT m013Dsx3RxMdlUNIT | 1.3.6.1.4.1.800.2.25.10.1.1.19 | OCTET STRING | read-write | Received MDL Unit Identification Code (UNIT). |
| OCT m013Dsx3RxMdlPFI | 1.3.6.1.4.1.800.2.25.10.1.1.20 | OCTET STRING | read-write | Received MDL Path Facility Identification Code (PFI). |
| OCT m013Dsx3RxMdlPortIdleSignalCode | 1.3.6.1.4.1.800.2.25.10.1.1.21 | OCTET STRING | read-write | Received MDL Port Idle Signal Code |
| OCT m013Dsx3RxMdlGenerator | 1.3.6.1.4.1.800.2.25.10.1.1.22 | OCTET STRING | read-write | Received MDL Generator. |
| INT m013Dsx3RemoteStatus | 1.3.6.1.4.1.800.2.25.10.1.1.23 | INTEGER | read-only | This variable indicates the Remote Line Status of the interface. |
| INT m013Dsx3RemoteStatusLastChange | 1.3.6.1.4.1.800.2.25.10.1.1.24 | INTEGER | read-only | The value of MIB II's sysUpTime object at the time the Remote DS3/E3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value. |
| INT m013Dsx3LedStatus | 1.3.6.1.4.1.800.2.25.10.1.1.25 | INTEGER | read-only | The LED state for this M013 Port. M013 module has 5 LEDs per port. The current bit definitions for the DS3 Port are: T3EN 0 - GRN OFF (0 off, 1 on) LOS 1 - RED OFF (0 off, 1 on) OOF 2 - RED OFF (0 off, 1 on) AIS 3 - RED OFF (0 off, 1 on) RAI 4 - YEL OFF (0 off, 1 on) |
| INT m013Dsx3Ds1StatsEnableMask | 1.3.6.1.4.1.800.2.25.10.1.1.26 | INTEGER | read-write | This is a 28 bit mask which allows selectively enable/disable stats collection on a particular DS1 within DS3 port. Each bit corresponds to one of the 28 DS1 within DS3 port. |
| m013Dsx3StatsTable | 1.3.6.1.4.1.800.2.25.10.2 | not-accessible | The DS3 Statistics table. | |
| m013Dsx3StatsEntry | 1.3.6.1.4.1.800.2.25.10.2.1 | not-accessible | An entry in the DS3 Statistics table. | |
| INT m013Dsx3StatsLineIndex | 1.3.6.1.4.1.800.2.25.10.2.1.1 | INTEGER | read-only | This object is the identifier of a DS3 port on a managed device. |
| CTR m013Dsx3StatsRxREI | 1.3.6.1.4.1.800.2.25.10.2.1.2 | Counter | read-only | The number of Remote Error Indications received. |
| INT m013Dsx3StatsRxFEAC | 1.3.6.1.4.1.800.2.25.10.2.1.3 | INTEGER | read-only | This object indicates the presence FEAC being received by this port. This object only applies to DS3 interface with framing format configured to C-bit parity. A value of dsx3NoFEAC(1) is returned for other cases. |
| m013Dsx1Group | 1.3.6.1.4.1.800.2.25.11 | |||
| m013Dsx1ConfigTable | 1.3.6.1.4.1.800.2.25.11.1 | not-accessible | The DS1 Configuration table. | |
| m013Dsx1ConfigEntry | 1.3.6.1.4.1.800.2.25.11.1.1 | not-accessible | An entry in the DS3 Configuration table. | |
| INT m013Dsx1LineIndex | 1.3.6.1.4.1.800.2.25.11.1.1.1 | INTEGER | read-only | This object is the identifier of a DS1 port on a managed device. |
| INT m013Dsx1T1BertPattern | 1.3.6.1.4.1.800.2.25.11.1.1.2 | INTEGER | read-write | This variable represents T1 BERT Pattern configuration. The values mean: 1 - 2^15-1, pseudo-random O.151 test pattern (32767-bit long) 2 - 2^20-1, pseudo-random O.151 test pattern (1048575-bit long) 3 - 2^20-QRSS, pseudo-random QRSS O.151 test pattern (1048575-bit long) 4 - 2^23-1, pseudo-random O.151 test pattern (8388607-bit long) 5 - 0s, respective test pattern of all zeros 6 - 1s, respective test pattern of all ones |
| INT m013Dsx1T1BertInterval | 1.3.6.1.4.1.800.2.25.11.1.1.3 | INTEGER | read-write | T1 BERT Interval |
| INT m013Dsx1T1BertFraming | 1.3.6.1.4.1.800.2.25.11.1.1.4 | INTEGER | read-write | T1 BERT Framing |
| INT m013Dsx1T1BertTestEnable | 1.3.6.1.4.1.800.2.25.11.1.1.5 | INTEGER | read-write | T1 BERT Start/Stop |
| INT m013Dsx1RemoteStatus | 1.3.6.1.4.1.800.2.25.11.1.1.6 | INTEGER | read-only | This variable indicates the Remote Line Status of the interface. |
| INT m013Dsx1RemoteStatusLastChange | 1.3.6.1.4.1.800.2.25.11.1.1.7 | INTEGER | read-only | The value of MIB II's sysUpTime object at the time the Remote DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value. |
RFC description
Alcatel Internetworking vendor-private MIB for module M013 platform-specific management objects.
Start monitoring Xylan OmniSwitch chassis switch with M013 module (HDLC-on-DS3 module provisioning config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.