All MIBs › XEROX-HOST-RESOURCES-EXT-TC
Organization: Xerox Corporation - XCMI Working Group
Last Updated: 2011-10-12
Category: Xerox Printer Management
Description: Defines Xerox XCMI textual conventions extending host resources MIB data type definitions.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is XEROX-HOST-RESOURCES-EXT-TC?
XEROX-HOST-RESOURCES-EXT-TC is a Xerox XCMI (Xerox Common Management Interface) textual-conventions module that extends the IETF Host Resources MIB (RFC 2790) with types and enumerations for Xerox multifunction printers and network-attached hosts. Rather than defining runtime instance data itself, it supplies the enumerated status, condition, and command types used by companion Xerox device MIBs to describe physical and logical device 'realizations'. It underpins monitoring of hardware and software device status such as device operational state (xCmHrDevInfoStatus/xCmHrDevInfoXStatus), fault conditions (xCmHrDevInfoConditions/xCmHrDevInfoXConditions), and remote management command execution/results. It explicitly builds on and extends RFC 2790 (Host Resources MIB) and follows ISO DPA (Document Printing Application) conventions, and its enumerations are registered under the XEROX-HOST-RESOURCES-EXT-TC OID branch that companion Xerox device MIBs import directly. Deployment context is Xerox network printers and multifunction devices managed via SNMP fleet-management tools.
IPNetwork Monitor allows you to monitor SNMP objects defined in XEROX-HOST-RESOURCES-EXT-TC. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Xerox network printers and multifunction devices (XCMI-compliant)
Monitoring Examples
A management application would use the enumerations defined here to interpret values returned by companion Xerox MIBs' device status objects, e.g. mapping xCmHrDevInfoStatus/xCmHrDevInfoXStatus codes to human-readable states like warming-up, ready, or fault, and xCmHrDevInfoConditions to specific alert conditions. xCmHrDevMgmtCommandRequest/xCmHrDevMgmtCommandData types would be used to issue remote commands (e.g. reset) and read back the tagged response via xCmHrDevMgmtCommandDataTag. As a pure textual-conventions module it defines no pollable object instances of its own; it is honestly a TC/type-definition module consumed by other Xerox MIBs rather than a source of live counters.
What Can Be Monitored
- device operational/fault status codes
- device condition/alert enumerations
- remote management command execution results
- device realization type (physical/logical)
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
From XEROX-COMMON-MIB
| xeroxCommonMIB | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| xcmHrAdminCommsService | 1.3.6.1.4.1.253.8.52.3.7 | The host system communications management service. | ||
| xcmHrAdminDeviceCoolDown | 1.3.6.1.4.1.253.8.52.4.17 | |||
| xcmHrAdminDeviceEnergySave | 1.3.6.1.4.1.253.8.52.4.18 | |||
| xcmHrAdminDeviceFlushInOut | 1.3.6.1.4.1.253.8.52.4.13 | |||
| xcmHrAdminDeviceFlushInput | 1.3.6.1.4.1.253.8.52.4.11 | |||
| xcmHrAdminDeviceFlushOutput | 1.3.6.1.4.1.253.8.52.4.12 | |||
| xcmHrAdminDeviceManage | 1.3.6.1.4.1.253.8.52.4.14 | |||
| xcmHrAdminDeviceNone | 1.3.6.1.4.1.253.8.52.4.1 | |||
| xcmHrAdminDeviceOperationTypes | 1.3.6.1.4.1.253.8.52.4 | The root of all host resources admin device operation types defined in the Host Resources Extensions TC. Usage: The following OIDs support access control for the simple device admin operations defined in 'XcmHrDevMgmtCommandRequest' and used in 'xcmHrDevMgmtCommandRequest' in the XCMI HRX MIB, via 'xcmSec[Master|Policy]VerbTypeOID' in the XCMI Security MIB, WITHOUT requiring implementation of the XCMI System Admin MIB. | ||
| xcmHrAdminDevicePowerToReady | 1.3.6.1.4.1.253.8.52.4.20 | |||
| xcmHrAdminDevicePowerToSleep | 1.3.6.1.4.1.253.8.52.4.22 | |||
| xcmHrAdminDevicePowerToStandby | 1.3.6.1.4.1.253.8.52.4.21 | |||
| xcmHrAdminDeviceQuiesce | 1.3.6.1.4.1.253.8.52.4.6 | |||
| xcmHrAdminDeviceRefresh | 1.3.6.1.4.1.253.8.52.4.15 | |||
| xcmHrAdminDeviceResetCold | 1.3.6.1.4.1.253.8.52.4.9 | |||
| xcmHrAdminDeviceResetCounters | 1.3.6.1.4.1.253.8.52.4.7 | |||
| xcmHrAdminDeviceResetFactory | 1.3.6.1.4.1.253.8.52.4.10 | |||
| xcmHrAdminDeviceResetWarm | 1.3.6.1.4.1.253.8.52.4.8 | |||
| xcmHrAdminDeviceResetWarning | 1.3.6.1.4.1.253.8.52.4.3 | |||
| xcmHrAdminDeviceService | 1.3.6.1.4.1.253.8.52.3.3 | The host system device management service. | ||
| xcmHrAdminDeviceShutdown | 1.3.6.1.4.1.253.8.52.4.5 | |||
| xcmHrAdminDeviceStartup | 1.3.6.1.4.1.253.8.52.4.2 | |||
| xcmHrAdminDeviceTest | 1.3.6.1.4.1.253.8.52.4.4 | |||
| xcmHrAdminDeviceWakeUp | 1.3.6.1.4.1.253.8.52.4.19 | |||
| xcmHrAdminDeviceWarmUp | 1.3.6.1.4.1.253.8.52.4.16 | |||
| xcmHrAdminDocService | 1.3.6.1.4.1.253.8.52.3.5 | The host system document management service. | ||
| xcmHrAdminJobService | 1.3.6.1.4.1.253.8.52.3.4 | The host system job management service. | ||
| xcmHrAdminObjectService | 1.3.6.1.4.1.253.8.52.3.1 | The host system object management service. | ||
| xcmHrAdminSecurityService | 1.3.6.1.4.1.253.8.52.3.6 | The host system security management service. | ||
| xcmHrAdminServerService | 1.3.6.1.4.1.253.8.52.3.2 | The host system server management service. | ||
| xcmHrAdminServiceTypes | 1.3.6.1.4.1.253.8.52.3 | The root of all host system management service types (classes) defined in the Host Resources Extensions TC. | ||
| XCM xCmHrConsoleDefaultService | 1.3.6.1.4.1.253.8.52.999.27 | XcmHrConsoleDefaultService | not-accessible | Dummy - DO NOT USE |
| xcmHrCruAdfFeedHeadModule | 1.3.6.1.4.1.253.8.52.2.206 | CRU ADF feed head module - manufacturer independent. An 'xcmHrCruAdfFeedHeadModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. Note: ADF is an acronym for 'automatic document feeder'. | ||
| xcmHrCruCleanerUnitModule | 1.3.6.1.4.1.253.8.52.2.209 | CRU cleaner unit module - manufacturer independent. An 'xcmHrCruCleanerUnitModule' device is a customer replaceable cleaner unit, with 'xcmHrDevInfoRealization' of 'physical' (eg, a belt cleaner or a photoreceptor cleaner). | ||
| xcmHrCruCollectorBottleModule | 1.3.6.1.4.1.253.8.52.2.204 | CRU (developer) collector bottle - manufacturer independent. An 'xcmHrCruCollectorBottleModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| xcmHrCruFilterModule | 1.3.6.1.4.1.253.8.52.2.208 | CRU filter module - manufacturer independent. An 'xcmHrCruFilterModule' device is a customer replaceable filter or filter unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| xcmHrCruFuserModule | 1.3.6.1.4.1.253.8.52.2.202 | CRU fuser module - manufacturer independent. An 'xcmHrCruFuserModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| xcmHrCruFuserWebModule | 1.3.6.1.4.1.253.8.52.2.207 | CRU fuser web module - manufacturer independent. An 'xcmHrCruFuserWebModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. Note: A 'fuser web' is an oil-soaked fiber roll in a fuser, which prevents toner from getting on the fuser roll. The 'fuser web' device would normally be replaced several times before the actual fuser device ('xcmHrCRUFuserModule') is replaced. | ||
| xcmHrCruPFPFeedRollModule | 1.3.6.1.4.1.253.8.52.2.212 | CRU Paper Feed Platform module - manufacturer independent. An 'xcmHrCruPaperFeedModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| xcmHrCruPFPRetardRollModule | 1.3.6.1.4.1.253.8.52.2.213 | CRU PFP Retard Roll module - manufacturer independent. An 'xcmHrCruPFPRetardRollModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| xcmHrCruTonerBottleModule | 1.3.6.1.4.1.253.8.52.2.203 | CRU toner bottle module - manufacturer independent. An 'xcmHrCruTonerBottleModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| xcmHrCruTransferRollerModule | 1.3.6.1.4.1.253.8.52.2.211 | CRU transfer roller module - manufacturer independent. An 'xcmHrCruTransferRollerModule' device is a customer replaceable transfer roller, with 'xcmHrDevInfoRealization' of 'physical' (eg, a biased transfer roller). | ||
| xcmHrCruTransferUnitModule | 1.3.6.1.4.1.253.8.52.2.210 | CRU transfer unit module - manufacturer independent. An 'xcmHrCruTransferUnitModule' device is a customer replaceable transfer unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| xcmHrCruTrayFeedHeadModule | 1.3.6.1.4.1.253.8.52.2.205 | CRU tray feed head module - manufacturer independent. An 'xcmHrCruTrayFeedHeadModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| xcmHrCruXerographicModule | 1.3.6.1.4.1.253.8.52.2.201 | CRU xerographic module - manufacturer independent. An 'xcmHrCruXerographicModule' device is a customer replaceable unit, with 'xcmHrDevInfoRealization' of 'physical'. | ||
| XCM xCmHrDetailTableEnumTC | 1.3.6.1.4.1.253.8.52.999.25 | XcmHrDetailTableEnumTC | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevCalendarDayOfWeek | 1.3.6.1.4.1.253.8.52.999.1 | XcmHrDevCalendarDayOfWeek | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevCalendarTimeOfDay | 1.3.6.1.4.1.253.8.52.999.2 | XcmHrDevCalendarTimeOfDay | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevDetailType | 1.3.6.1.4.1.253.8.52.999.3 | XcmHrDevDetailType | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevDetailUnitClass | 1.3.6.1.4.1.253.8.52.999.4 | XcmHrDevDetailUnitClass | not-accessible | Dummy - DO NOT USE |
| xcmHrDeviceAccountingInterface | 1.3.6.1.4.1.253.8.52.2.123 | Accounting device type - manufacturer independent. A physical connection provided by a device for the purpose of connecting an external accounting-related accessory. This accessory would provide the capability to track machine usage but would not restrict access to the machine as would an accessory defined by type xcmHrDevicePaymentInterface. | ||
| xcmHrDeviceColorScanningCard | 1.3.6.1.4.1.253.8.52.2.128 | An xcmHrDeviceColorScanningCard is a physical card that allows for scanning of color, or monochrome, images from the printer to a remote device. | ||
| xcmHrDeviceCopier | 1.3.6.1.4.1.253.8.52.2.103 | Copier device type - manufacturer independent. An 'xcmHrDeviceCopier' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' I/O device (eg, a 'copier' on a multifunction printer). An 'xcmHrDeviceCopier' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' I/O device (eg, a 'personality' of a 'copier' on a multifunction printer). | ||
| xcmHrDeviceCopierHistory | 1.3.6.1.4.1.253.8.52.2.153 | Copier history device type - manufacturer independent. | ||
| xcmHrDeviceEmbeddedFax | 1.3.6.1.4.1.253.8.52.2.120 | Embedded Fax device type - manufacturer independent. A local fax service which sends and/or receives fax directly over a modem and phone lines. | ||
| xcmHrDeviceFax | 1.3.6.1.4.1.253.8.52.2.104 | Fax device type - manufacturer independent. xcmHrDeviceFax is maintained for legacy products. It is recommended that the hrDeviceType is explicitly defined using xcmHrDeviceEmbeddedFax, xcmHrDeviceServerFax or xcmHrDeviceInternetFax. An 'xcmHrDeviceFax' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' I/O device (eg, a 'fax channel' on a multifunction printer). An 'xcmHrDeviceFax' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' I/O device (eg, a 'personality' of a 'fax channel' on a multifunction printer). | ||
| xcmHrDeviceFaxHistory | 1.3.6.1.4.1.253.8.52.2.154 | Fax history device type - manufacturer independent. | ||
| xcmHrDeviceFeeder | 1.3.6.1.4.1.253.8.52.2.107 | Feeder device type - manufacturer independent. An 'xcmHrDeviceFeeder' device is an input device. An 'xcmHrDeviceFeeder' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'high-capacity feeder' on a high-end printer). An 'xcmHrDeviceFeeder' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'high-capacity feeder' on a high-end printer). | ||
| xcmHrDeviceFeederLFF | 1.3.6.1.4.1.253.8.52.2.125 | Feeder device type - Xerox Large Format Feeder. An 'xcmHrDeviceFeederLFF' device is an input device. An 'xcmHrDeviceFeeder' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'high-capacity large format feeder' on a high-end printer). An 'xcmHrDeviceFeeder' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'high-capacity large format feeder' on a high-end printer). | ||
| xcmHrDeviceFeederSFM | 1.3.6.1.4.1.253.8.52.2.124 | Feeder device type - Xerox Substraite Feeding Module An 'xcmHrDeviceFeederSFM' device is an input device. An 'xcmHrDeviceFeederSFM' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'high-capacity feeder' on a high-end printer). An 'xcmHrDeviceFeeder' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'high-capacity feeder' on a high-end printer). | ||
| xcmHrDeviceFinisher | 1.3.6.1.4.1.253.8.52.2.106 | Finisher device type - manufacturer independent. An 'xcmHrDeviceFinisher' device is an output finishing device. An 'xcmHrDeviceFinisher' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'stapler' on a high-end printer). An 'xcmHrDeviceFinisher' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'stapler' on a high-end printer). | ||
| xcmHrDeviceFinisher3rdParty | 1.3.6.1.4.1.253.8.52.2.115 | 3rd Party Finisher device type - manufacturer independent. An 'xcmHrDeviceFinisher3rdParty' device is an output finishing device. An 'xcmHrDeviceFinisher3rdParty' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'stapler' on a high-end printer). An 'xcmHrDeviceFinisher3rdParty' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'stapler' on a high-end printer). | ||
| xcmHrDeviceFinisherBFM | 1.3.6.1.4.1.253.8.52.2.112 | Basic Finisher Module device type - manufacturer independent. An 'xcmHrDeviceFinisherBFM' device is a basic output finishing device. An 'xcmHrDeviceFinisherBFM' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'stapler' on a high-end printer). An 'xcmHrDeviceFinisherBFM' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'stapler' on a high-end printer). | ||
| xcmHrDeviceFinisherMFF | 1.3.6.1.4.1.253.8.52.2.113 | Multi-Function Finisher device type - manufacturer independent. An 'xcmHrDeviceFinisherMFF' device is a multi-function output finishing device. An 'xcmHrDeviceFinisherMFF' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'saddle stitcher', 'C-Folder', 'Z-Folder', 'Hole Puncher' on a high-end printer). An 'xcmHrDeviceFinisherMFF' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'saddle stitcher', 'C-Folder', 'Z-Folder', 'Hole Puncher' on a high-end printer). | ||
| xcmHrDeviceFinisherXIM | 1.3.6.1.4.1.253.8.52.2.114 | eXternal Interface Module Finisher device type. An 'xcmHrDeviceFinisherXIM' device is a hardware interface used to pass media from a Xerox printing device to a 3rd party finishing devices. The 'xcmHrDeviceFinihserXIM' may or may not contain its own output trays or finishing capabilities. An 'xcmHrDeviceFinisherXIM' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (e.g., an 'output bridge' on a high-end printer). | ||
| xcmHrDeviceFlashDIMMBootLoader | 1.3.6.1.4.1.253.8.52.2.261 | The device type identifier used for a Flash DIMM that contains the boot loader for a device. Files may or may not be stored o this device. As opposed to a Flash DIMM that contains a file store system. | ||
| xcmHrDeviceFlashDIMMFileStore | 1.3.6.1.4.1.253.8.52.2.260 | The device type identifier used for a Flash DIMM that contains a file system that is used to store files such as font files. opposed to a Flash DIMM that contains a boot loader. | ||
| xcmHrDeviceFlashDrive | 1.3.6.1.4.1.253.8.52.2.262 | The device type identifier used for a Flash Drive for a device Files may or may not be stored on this device. As opposed to a Flash DIMM that contains a file store system or a bootloader. | ||
| xcmHrDeviceForeignInterface | 1.3.6.1.4.1.253.8.52.2.121 | Foreign Interface device type - manufacturer independent. A physical connection provided by a device for the purpose of connecting an external accessory. This accessory may be capable of tracking data (e.g. Auditron) or may enable/ disable device operation (e.g. card reader, coin operator, etc.). This device type shall only be used when the device cannot detect the type of external accessory that is physically connected. If the device can detect the type of external accessory which can be physically connected, then the appropriate device type for that interface should be used instead. (e.g. xcmHrDevicePaymentInterface, xcmHrDeviceSecurityInterface, or xcmHrDeviceAccountingInterface | ||
| xcmHrDeviceHostSystem | 1.3.6.1.4.1.253.8.52.2.101 | Host system device type - manufacturer independent. For host systems which instrument multiple devices and support MIBs with tables INDEXed by 'hrDeviceIndex', the single 'xcmHrDeviceHostSystem' device represents the 'root' device which MAY be used to manage overall host system defaults, configuration, status, etc. | ||
| xcmHrDeviceHostSystemHistory | 1.3.6.1.4.1.253.8.52.2.151 | Host system history device type - manufacturer independent. | ||
| xcmHrDeviceInternetFax | 1.3.6.1.4.1.253.8.52.2.118 | Internet Fax device type - manufacturer independent. A local Fax service which sends and/or receives faxes over the internet | ||
| xcmHrDeviceInterposer | 1.3.6.1.4.1.253.8.52.2.117 | Interposer device type - manufacturer independent. An 'xcmHrDeviceInterposer' device is an input device which physically resides downstream of the print engine amongst finishing modules. An 'xcmHrDeviceInterposer' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' input device (eg, a 'high-capacity Interposing feeder' that physically resides amongst finishing modules on a high-end printer). An 'xcmHrDeviceInterposer' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' input device (eg, a 'personality' of a 'high-capacity Interposing feeder' that physically resides amongst finishing modules on a high-end printer). Interposers are essentially feeders that are placed downstream of the print engine paper path and upstream of finishing devices. Interposer fed media is not marked by the print engine; instead media fed from an interposer is inserted before, between or after marked pages. The media constitutes covers, separators etc. | ||
| xcmHrDeviceMailbox | 1.3.6.1.4.1.253.8.52.2.105 | Mailbox device type - manufacturer independent. An 'xcmHrDeviceMailbox' device is a 'multi-bin' output device, with each 'bin' assigned to a user, group, account, etc, and (optionally) physical security associated with each 'bin'. An 'xcmHrDeviceMailbox' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'tower mailbox' on a high-end printer). An 'xcmHrDeviceMailbox' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'tower mailbox' on a high-end printer). An 'xcmHrDeviceMailbox' device with 'xcmHrDevInfoRealization' of 'logical' MAY also indicate the current configuration of a 'physical' device of type 'xcmHrDeviceMailboxSorter'. | ||
| xcmHrDeviceMailboxSorter | 1.3.6.1.4.1.253.8.52.2.109 | MailboxSorter device type - manufacturer independent. An 'xcmHrDeviceMailboxSorter' is a 'multi-bin' output device, which MAY be configured as either a 'mailbox' or a 'sorter', by a system adminstrator or by default product configuration. An 'xcmHrDeviceMailboxSorter' with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device and associated with associated with exactly two 'logical' output devices of types 'xcmHrDeviceMailbox' and 'xcmHrDeviceSorter' - one of these 'logical' devices MAY be 'running' (currently configured) - at least one SHALL be 'down' (NOT currently configured). | ||
| xcmHrDeviceMarker | 1.3.6.1.4.1.253.8.52.2.111 | Marker Engine device type - manufacturer independent. An 'xcmHrDeviceMarker' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, the 'marking engine' on a multifunction printer or copier). The marking engine is the module that accepts a print ready image and physical media as input and outputs physical media with a physical representation of the print ready input image. The 'xcmHrDeviceMarker' is a single module within a group of modules that cumulatively are represented by 'hrDevicePrinter'. The marker shall represent the whole marker as a single physical unit and should maintain a single entry in the 'hrDeviceTable' for all products that support a single marking engine regardless of internal engine mark points. (e.g. B&W, Highlight Color and Full Color Presses shall have a single entry in 'hrDeviceTable'). Multiple entries of 'xcmHrDeviceMarker' may exist in the 'hrDeviceTable' if the system supports multiple print engines whether chained, in parallel or in any other configuration. An 'xcmHrDeviceMarker' SHALL NOT use 'hrDeviceIndex' of '1' (first row). The index 1 is reserved for an 'hrDevicePrinter' row. | ||
| xcmHrDevicePaymentInterface | 1.3.6.1.4.1.253.8.52.2.116 | Payment Interface device type - manufacturer independent. An 'xcmHrDevicePaymentInterface' device is an payment authorization device. An 'xcmHrDevicePaymentInterface' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' point of purchase validation device (eg, a 'coin operated', 'smart card' or other form of point of purchase payment for services rendered on a multi-function printer or copier). An 'xcmHrDevicePaymentInterface' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' point of purchase validation device (eg, a software service that accepts payment through the Web or some other form of remote point of purchase payment for services rendered on a multi-function printer or copier). | ||
| xcmHrDevicePrintAppliance | 1.3.6.1.4.1.253.8.52.2.110 | Print appliance device type - manufacturer independent. An 'xcmHrDevicePrintAppliance' is a network printing appliance with 'xcmHrDevInfoRealization' of 'physical'. An 'xcmHrDevicePrintAppliance' SHALL statically and/or actively discover available network printers and SHOULD advertise them as supported output devices, using rows in 'hrDeviceTable' of IETF HR MIB (RFC 2790) and 'prtGeneralTable' of the Printer MIB (RFC 1759 or successor), with 'hrDeviceType' set to 'hrDevicePrinter'. An 'xcmHrDevicePrintAppliance' SHALL NOT use 'hrDeviceIndex' of '1' (first row) for an 'hrDevicePrinter' row, because a network printing appliance is an enhanced spooler and NOT a printer. | ||
| xcmHrDevicePrinterHistory | 1.3.6.1.4.1.253.8.52.2.55 | Printer history device type - manufacturer independent. | ||
| xcmHrDeviceScanner | 1.3.6.1.4.1.253.8.52.2.102 | Scanner device type - manufacturer independent. An 'xcmHrDeviceScanner' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' input device (eg, a 'scan channel' on a multifunction printer). An 'xcmHrDeviceScanner' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' input device (eg, a 'personality' of a 'scan channel' on a multifunction printer). | ||
| xcmHrDeviceScannerADF | 1.3.6.1.4.1.253.8.52.2.126 | Scanner device type - manufacturer independent automatic document feeding scanner. An 'xcmHrDeviceScannerADF' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' input device (eg, a 'scan channel' on a multifunction printer). An 'xcmHrDeviceScannerADF' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' input device (eg, a 'personality' of a 'scan channel' on a multifunction printer). | ||
| xcmHrDeviceScannerHistory | 1.3.6.1.4.1.253.8.52.2.152 | Scanner history device type - manufacturer independent. | ||
| xcmHrDeviceScannerPlaten | 1.3.6.1.4.1.253.8.52.2.127 | Scanner device type - manufacturer independent platen glass scanner. An 'xcmHrDeviceScannerPlaten' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' input device (eg, a 'scan channel' on a multifunction printer). An 'xcmHrDeviceScannerPlaten' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' input device (eg, a 'personality' of a 'scan channel' on a multifunction printer). | ||
| xcmHrDeviceSecurityInterface | 1.3.6.1.4.1.253.8.52.2.122 | Security device type - manufacturer independent. A physical connection provided by a device for the purpose of connecting an external security-related accessory. This accessory may consist of a card reader or biometric device which would restrict access to a machine to only authorized users. | ||
| xcmHrDeviceServerFax | 1.3.6.1.4.1.253.8.52.2.119 | Server Fax device type - manufacturer independent. A Fax service which works with a server on the network to send and/or receive faxes over a remote modem and phone lines | ||
| xcmHrDeviceSorter | 1.3.6.1.4.1.253.8.52.2.108 | Sorter device type - manufacturer independent. An 'xcmHrDeviceSorter' device is a 'multi-bin' output device, with each 'bin' assigned to a copy of the current job, and NO physical security associated with each 'bin'. An 'xcmHrDeviceSorter' device with 'xcmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a '10-bin sorter' on a mid-range printer). An 'xcmHrDeviceSorter' device with 'xcmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a '10-bin sorter' on a mid-range printer). An 'xcmHrDeviceSorter' device with 'xcmHrDevInfoRealization' of 'logical' MAY also indicate the current configuration of a 'physical' device of type 'xcmHrDeviceMailboxSorter'. | ||
| xcmHrDeviceTypes | 1.3.6.1.4.1.253.8.52.2 | The root of all additional device types defined in HRX TC. | ||
| xcmHrDeviceUSBPort | 1.3.6.1.4.1.253.8.52.2.250 | The device type identifier used for a Universal Serial Bus port. | ||
| XCM xCmHrDevInfoConditions | 1.3.6.1.4.1.253.8.52.999.8 | XcmHrDevInfoConditions | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevInfoRealization | 1.3.6.1.4.1.253.8.52.999.5 | XcmHrDevInfoRealization | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevInfoStatus | 1.3.6.1.4.1.253.8.52.999.6 | XcmHrDevInfoStatus | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevInfoXConditions | 1.3.6.1.4.1.253.8.52.999.9 | XcmHrDevInfoXConditions | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevInfoXStatus | 1.3.6.1.4.1.253.8.52.999.7 | XcmHrDevInfoXStatus | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevMgmtCommandData | 1.3.6.1.4.1.253.8.52.999.11 | XcmHrDevMgmtCommandData | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevMgmtCommandDataTag | 1.3.6.1.4.1.253.8.52.999.12 | XcmHrDevMgmtCommandDataTag | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevMgmtCommandRequest | 1.3.6.1.4.1.253.8.52.999.10 | XcmHrDevMgmtCommandRequest | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevPowerModeType | 1.3.6.1.4.1.253.8.52.999.13 | XcmHrDevPowerModeType | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevPowerTimeUnit | 1.3.6.1.4.1.253.8.52.999.14 | XcmHrDevPowerTimeUnit | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDevTrafficUnit | 1.3.6.1.4.1.253.8.52.999.15 | XcmHrDevTrafficUnit | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDpaAvailability | 1.3.6.1.4.1.253.8.52.999.20 | XcmHrDpaAvailability | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDpaConditions | 1.3.6.1.4.1.253.8.52.999.21 | XcmHrDpaConditions | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDpaJobValidateSupport | 1.3.6.1.4.1.253.8.52.999.22 | XcmHrDpaJobValidateSupport | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDpaObjectClassSupport | 1.3.6.1.4.1.253.8.52.999.23 | XcmHrDpaObjectClassSupport | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrDpaState | 1.3.6.1.4.1.253.8.52.999.24 | XcmHrDpaState | not-accessible | Dummy - DO NOT USE |
| xCmHrDummy | 1.3.6.1.4.1.253.8.52.999 | |||
| XCM xCmHrGroupSupport | 1.3.6.1.4.1.253.8.52.999.16 | XcmHrGroupSupport | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrStorageDetailType | 1.3.6.1.4.1.253.8.52.999.18 | XcmHrStorageDetailType | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrStorageRealization | 1.3.6.1.4.1.253.8.52.999.19 | XcmHrStorageRealization | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrSuppliesClassTC | 1.3.6.1.4.1.253.8.52.999.26 | XcmHrSuppliesClassTC | not-accessible | Dummy - DO NOT USE |
| XCM xCmHrSWRunXStatus | 1.3.6.1.4.1.253.8.52.999.17 | XcmHrSWRunXStatus | not-accessible | Dummy - DO NOT USE |
| xcmHrTC | 1.3.6.1.4.1.253.8.52 | Version: 6.001.pub The TC module for textual conventions, enumerated types, OIDs, and other volatile elements of the companion Host Resources Extensions MIB ('xcmHrMIB'), which supports extended configuration and management of various host resources for network accessible host systems. These modules augment and extend the original IETF Host Resources MIB (RFC 2790). Usage: This MIB module introduces support for the 'realization' of both 'physical' and 'logical' devices, consistent with ISO DPA (Document Printing Application), ISO/IEC 10175, as reflected in the object 'xcmHrDevInfoRealization'. Note: Conforming implementations SHALL NOT 'bubble up' status from 'physical' devices to associated 'logical' devices. All devices SHALL report their own status ONLY. See: Section 9 'Supplement' in XCMI Extensions to IETF Host Resources TC, for implementation guidance for this TC module. Copyright (C) 1995-2009 Xerox Corporation. All Rights Reserved. |
RFC description
Xerox extended Host Resources textual conventions for device management.
Start monitoring Xerox network printers and multifunction devices, XCMI shared host-resources textual-conventions module (no device-specific data) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.