Wellfleet-XNS-MIB

All MIBs › Wellfleet-XNS-MIB

Category: Wellfleet BayNetworks Routing Protocols

Description: Monitors Wellfleet XNS (Xerox Network Systems) protocol routing parameters and traffic statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-XNS-MIB?

Wellfleet-XNS-MIB is a legacy Wellfleet Communications (later Bay Networks/Nortel, built on Wellfleet-COMMON-MIB) proprietary MIB configuring XNS (Xerox Network Systems) routing. Its objects cover a create/delete/disable/state control, configured/active host-number counts, an implement flag, net/host counts, a log filter, an adjacency table (network, host ID, cost, age, interface, circuit), and a route table (destination, ifIndex, metric, next-hop network/host, route type). As a configuration/status MIB it lets an administrator confirm XNS routing adjacencies and route table state on a legacy Wellfleet (Bay Networks/Nortel) router. It is deployed on legacy Wellfleet Communications (Bay Networks/Nortel) routers (XNS). Engineers can download the Wellfleet-XNS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-XNS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Wellfleet Communications (Bay Networks/Nortel) routers (XNS)

Monitoring Examples

An administrator checks wfXnsBaseRtEntryTable and wfXnsBaseAdjEntryTable to confirm XNS routing adjacencies and route state on a legacy Wellfleet (Bay Networks/Nortel) router.

What Can Be Monitored

XNS routing adjacency and route-table state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Opaque

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfXnsGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfXnsBase	1.3.6.1.4.1.18.3.5.10.1
INT wfXnsBaseDelete	1.3.6.1.4.1.18.3.5.10.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete XNS.
INT wfXnsBaseDisable	1.3.6.1.4.1.18.3.5.10.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable XNS.
INT wfXnsBaseState	1.3.6.1.4.1.18.3.5.10.1.3	INTEGER	read-only	The current state of the entire XNS.
OCT wfXnsBaseCfgHostNumber	1.3.6.1.4.1.18.3.5.10.1.4	OCTET STRING	read-write	Host Number of Router and potential MAC address of box.
OCT wfXnsBaseActiveHostNumber	1.3.6.1.4.1.18.3.5.10.1.5	OCTET STRING	read-only	a legal input, else takes on a self generated unique number
INT wfXnsBaseImplement	1.3.6.1.4.1.18.3.5.10.1.6	INTEGER	read-write	Implementation method. UB_XNS/XNS concurrent functionality or Vanilla XNS functionality only.
CTR wfXnsBaseNetCount	1.3.6.1.4.1.18.3.5.10.1.7	Counter	read-only	Count the total number of nets in the box.
CTR wfXnsBaseHostCount	1.3.6.1.4.1.18.3.5.10.1.8	Counter	read-only	Count the total number of hosts in the box.
INT wfXnsBaseLogFilter	1.3.6.1.4.1.18.3.5.10.1.9	INTEGER	read-write	Filter out some log messages, Default filters out debugs, info, and trace messages.
wfXnsBaseRtEntryTable	1.3.6.1.4.1.18.3.5.10.2		not-accessible	The table of Elements in XNS's routing table
wfXnsBaseRtEntry	1.3.6.1.4.1.18.3.5.10.2.1		not-accessible	An entry in the Routing Table
OCT wfXnsBaseRouteDest	1.3.6.1.4.1.18.3.5.10.2.1.1	OCTET STRING	read-only	The destination XNS address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
INT wfXnsBaseRouteIfIndex	1.3.6.1.4.1.18.3.5.10.2.1.2	INTEGER	read-only	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
INT wfXnsBaseRouteMetric	1.3.6.1.4.1.18.3.5.10.2.1.3	INTEGER	read-only	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's XnsBaseRouteProto value. If this metric is not used, its value should be set to -1.
OCT wfXnsBaseRouteNextHopNetwork	1.3.6.1.4.1.18.3.5.10.2.1.4	OCTET STRING	read-only	(In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's XNS address on that interface.)
OCT wfXnsBaseRouteNextHopHost	1.3.6.1.4.1.18.3.5.10.2.1.5	OCTET STRING	read-only	Full network.host_id address of nexthop host for this network.
INT wfXnsBaseRouteType	1.3.6.1.4.1.18.3.5.10.2.1.6	INTEGER	read-only	The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the XNS architecture.
INT wfXnsBaseRouteProto	1.3.6.1.4.1.18.3.5.10.2.1.7	INTEGER	read-only	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
INT wfXnsBaseRouteAge	1.3.6.1.4.1.18.3.5.10.2.1.8	INTEGER	read-only	The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OCT wfXnsBaseRouteInfo	1.3.6.1.4.1.18.3.5.10.2.1.9	OCTET STRING	read-only	A user-defined string which describes this Route entry
wfXnsInterfaceTable	1.3.6.1.4.1.18.3.5.10.3		not-accessible	The network interface record
wfXnsInterfaceEntry	1.3.6.1.4.1.18.3.5.10.3.1		not-accessible	An entry in the Routing Table
INT wfXnsInterfaceIndex	1.3.6.1.4.1.18.3.5.10.3.1.1	INTEGER	read-only	A unique value for each XNS interface. Its value ranges between 1 and the value of MAXCIRCUITS.
INT wfXnsInterfaceDelete	1.3.6.1.4.1.18.3.5.10.3.1.2	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an XNS interface.
INT wfXnsInterfaceDisable	1.3.6.1.4.1.18.3.5.10.3.1.3	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an XNS interface.
INT wfXnsInterfaceState	1.3.6.1.4.1.18.3.5.10.3.1.4	INTEGER	read-only	The current state of the XNS interface
INT wfXnsInterfaceCircuit	1.3.6.1.4.1.18.3.5.10.3.1.5	INTEGER	read-only	The Circuit Number that this interface runs over
OCT wfXnsInterfaceNetworkNumber	1.3.6.1.4.1.18.3.5.10.3.1.6	OCTET STRING	read-only	The XNS Address to which this entry's addressing information pertains.
INT wfXnsInterfaceCost	1.3.6.1.4.1.18.3.5.10.3.1.7	INTEGER	read-write	The Cost associated with the XNS Address of this entry
INT wfXnsInterfaceXsumOn	1.3.6.1.4.1.18.3.5.10.3.1.8	INTEGER	read-write	Flag for checksums
INT wfXnsInterfaceEncaps	1.3.6.1.4.1.18.3.5.10.3.1.9	INTEGER	read-only	chosen by the XNS implementation according to underlying media.
OCT wfXnsInterfaceMacAddress	1.3.6.1.4.1.18.3.5.10.3.1.10	OCTET STRING	read-write	The MacAddress of this interface this port will receive or transmit.
OCT wfXnsInterfaceSMDSGroupAddress	1.3.6.1.4.1.18.3.5.10.3.1.11	OCTET STRING	read-write	The SMDS Group Address of this interface this port will receive or transmit.
INT wfXnsInterfaceMaxInfo	1.3.6.1.4.1.18.3.5.10.3.1.12	INTEGER	read-only	The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
INT wfXnsInterfaceExtServer	1.3.6.1.4.1.18.3.5.10.3.1.13	INTEGER	read-write	Flag indicating if this interface has External server capabilities turned on. Allows interface to pass on defined packets, such as PEP/TP requests, to a remote server not located on local network.
OCT wfXnsInterfaceExServNetwork	1.3.6.1.4.1.18.3.5.10.3.1.14	OCTET STRING	read-write	The Network address of the remote server.
OCT wfXnsInterfaceExServHostId	1.3.6.1.4.1.18.3.5.10.3.1.15	OCTET STRING	read-write	The Host ID of the remote server.
OCT wfXnsInterfaceExServPktType	1.3.6.1.4.1.18.3.5.10.3.1.16	OCTET STRING	read-write	The packet type of the requests which are to be passed on to the specified remote server.
OCT wfXnsInterfaceExServSockNm	1.3.6.1.4.1.18.3.5.10.3.1.17	OCTET STRING	read-write	The destination socket number of the requests which are to be passed on to the specified remote server. If no socket number is specified then all packets of the specified type that this interface receives will be forwarded to specified remote server.
CTR wfXnsInterfaceInReceives	1.3.6.1.4.1.18.3.5.10.3.1.18	Counter	read-only	The total number of input datagrams received from interfaces, including those received in error.
CTR wfXnsInterfaceInHdrErrors	1.3.6.1.4.1.18.3.5.10.3.1.19	Counter	read-only	The number of input datagrams discarded due to errors in their XNS headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their XNS options, etc.
CTR wfXnsInterfaceInAddrErrors	1.3.6.1.4.1.18.3.5.10.3.1.20	Counter	read-only	The number of input datagrams discarded because the XNS address in their XNS header's destination field was not a valid address to be received at this entity.This counter includes datagrams discarded because the destination address was not a local address.
CTR wfXnsInterfaceForwDatagrams	1.3.6.1.4.1.18.3.5.10.3.1.21	Counter	read-only	The number of input datagrams for which this entity was not their final XNS destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as XNS Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
CTR wfXnsInterfaceInUnknownProtos	1.3.6.1.4.1.18.3.5.10.3.1.22	Counter	read-only	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
CTR wfXnsInterfaceInDiscards	1.3.6.1.4.1.18.3.5.10.3.1.23	Counter	read-only	The number of input XNS datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
CTR wfXnsInterfaceInDelivers	1.3.6.1.4.1.18.3.5.10.3.1.24	Counter	read-only	The total number of input datagrams successfully delivered to XNS user-protocols (including ECHO)
CTR wfXnsInterfaceOutRequests	1.3.6.1.4.1.18.3.5.10.3.1.25	Counter	read-only	The total number of XNS datagrams which local XNS user-protocols supplied to XNS in requests for transmission. Note that this counter does not include any datagrams counted in XnsInteraceFwdDatagrams.
CTR wfXnsInterfaceOutDiscards	1.3.6.1.4.1.18.3.5.10.3.1.26	Counter	read-only	The number of output XNS datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in XnsForwDatagrams if any such packets met this (discretionary) discard criterion.
CTR wfXnsInterfaceOutNoRoutes	1.3.6.1.4.1.18.3.5.10.3.1.27	Counter	read-only	The number of XNS datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
OCT wfXnsInterfaceFRBcast	1.3.6.1.4.1.18.3.5.10.3.1.28	OCTET STRING	read-write	Configurable Frame Relay broadcast address
OCT wfXnsInterfaceFRMcast	1.3.6.1.4.1.18.3.5.10.3.1.29	OCTET STRING	read-write	Configurable Frame Relay multicast address
INT wfXnsInterfaceSplit	1.3.6.1.4.1.18.3.5.10.3.1.30	INTEGER	read-write	Enable or Disable Split Horizon algorithm for this interface Comes into to play for non full-meshed WAN networks (Frame Relay)
wfXnsRipIntfTable	1.3.6.1.4.1.18.3.5.10.4		not-accessible	The list of RIP interfaces
wfXnsRipIntfEntry	1.3.6.1.4.1.18.3.5.10.4.1		not-accessible	An entry in the Routing Table
INT wfXnsRipInterfaceDelete	1.3.6.1.4.1.18.3.5.10.4.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an RIP Interface instance.
INT wfXnsRipInterfaceDisable	1.3.6.1.4.1.18.3.5.10.4.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable a RIP instance.
INT wfXnsRipInterfaceState	1.3.6.1.4.1.18.3.5.10.4.1.3	INTEGER	read-only	The current state of RIP on this interface.
OCT wfXnsRipInterfaceIndex	1.3.6.1.4.1.18.3.5.10.4.1.4	OCTET STRING	read-only	The XNS interface to run RIP on.
INT wfXnsRipInterfaceSupply	1.3.6.1.4.1.18.3.5.10.4.1.5	INTEGER	read-write	Transmit RIP packets.
INT wfXnsRipInterfaceListen	1.3.6.1.4.1.18.3.5.10.4.1.6	INTEGER	read-write	Receive RIP packets.
wfXnsAdjacentHostTable	1.3.6.1.4.1.18.3.5.10.5		not-accessible	must be configured for a nexthop host.
wfXnsAdjacentHostEntry	1.3.6.1.4.1.18.3.5.10.5.1		not-accessible	An entry in the Adjacent Host Table
INT wfXnsAhDelete	1.3.6.1.4.1.18.3.5.10.5.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the XNS Static Host.
INT wfXnsAhDisable	1.3.6.1.4.1.18.3.5.10.5.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this XNS Static Route.
OCT wfXnsAhTargHostNetwork	1.3.6.1.4.1.18.3.5.10.5.1.3	OCTET STRING	read-only	The network address of the static host.
OCT wfXnsAhTargHostId	1.3.6.1.4.1.18.3.5.10.5.1.4	OCTET STRING	read-only	The Address of this static host.
OCT wfXnsAhNextHopIntf	1.3.6.1.4.1.18.3.5.10.5.1.5	OCTET STRING	read-write	The Next Hop Interface Network Address
OCT wfXnsAhDlci	1.3.6.1.4.1.18.3.5.10.5.1.6	OCTET STRING	read-write	The next Hop Host address
wfXnsStaticRouteTable	1.3.6.1.4.1.18.3.5.10.6		not-accessible	The list of Adjacent Hosts used for Configuring XNS
wfXnsStaticRouteEntry	1.3.6.1.4.1.18.3.5.10.6.1		not-accessible	An entry in the Host Table
INT wfXnsSrDelete	1.3.6.1.4.1.18.3.5.10.6.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the XNS Static Route.
INT wfXnsSrDisable	1.3.6.1.4.1.18.3.5.10.6.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this XNS Static Route.
OCT wfXnsSrTargNetwork	1.3.6.1.4.1.18.3.5.10.6.1.3	OCTET STRING	read-only	The Address of this static route
INT wfXnsSrCost	1.3.6.1.4.1.18.3.5.10.6.1.4	INTEGER	read-write	The Cost of this Static Route
OCT wfXnsSrNextHopNetwork	1.3.6.1.4.1.18.3.5.10.6.1.5	OCTET STRING	read-only	The Next Hop XNS Address
OCT wfXnsSrNextHopHost	1.3.6.1.4.1.18.3.5.10.6.1.6	OCTET STRING	read-write	The next Hop Host address
INT wfXnsSrTargNetworkRt	1.3.6.1.4.1.18.3.5.10.6.1.7	INTEGER	read-only	The Route Identifier Which numbered route this is to be
wfXnsTrafficFilterTable	1.3.6.1.4.1.18.3.5.10.7		not-accessible	XNS Traffic Filters
wfXnsTrafficFilterEntry	1.3.6.1.4.1.18.3.5.10.7.1		not-accessible	A traffic filter definition
INT wfXnsTrafficFilterCreate	1.3.6.1.4.1.18.3.5.10.7.1.1	INTEGER	read-write	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
INT wfXnsTrafficFilterEnable	1.3.6.1.4.1.18.3.5.10.7.1.2	INTEGER	read-write	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
INT wfXnsTrafficFilterStatus	1.3.6.1.4.1.18.3.5.10.7.1.3	INTEGER	read-only	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule.
CTR wfXnsTrafficFilterCounter	1.3.6.1.4.1.18.3.5.10.7.1.4	Counter	read-only	The number of received packets that have matched this rule.
OPA wfXnsTrafficFilterDefinition	1.3.6.1.4.1.18.3.5.10.7.1.5	Opaque	read-write	The filter rule definition.
INT wfXnsTrafficFilterReserved	1.3.6.1.4.1.18.3.5.10.7.1.6	INTEGER	read-only	Reserved field.
OCT wfXnsTrafficFilterInterface	1.3.6.1.4.1.18.3.5.10.7.1.7	OCTET STRING	read-only	The network address of the XNS interface to which this filter is applied.
INT wfXnsTrafficFilterCircuit	1.3.6.1.4.1.18.3.5.10.7.1.8	INTEGER	read-only	The ID of the Circuit to which the filter is applied.
INT wfXnsTrafficFilterRuleNumber	1.3.6.1.4.1.18.3.5.10.7.1.9	INTEGER	read-only	ID for the rule.
INT wfXnsTrafficFilterFragment	1.3.6.1.4.1.18.3.5.10.7.1.10	INTEGER	read-only	Fragment number - for large rules.
STR wfXnsTrafficFilterName	1.3.6.1.4.1.18.3.5.10.7.1.11	DisplayString	read-write	Name of the rule number.
wfXnsBaseAdjEntryTable	1.3.6.1.4.1.18.3.5.10.8		not-accessible	This is used by Ungermann-Bass functionality only.
wfXnsBaseAdjEntry	1.3.6.1.4.1.18.3.5.10.8.1		not-accessible	An entry in the Adjacency Table
OCT wfXnsBaseAdjacencyNetwork	1.3.6.1.4.1.18.3.5.10.8.1.1	OCTET STRING	read-only	Adjacent Router's/Host's network address for which a hello has been received.
OCT wfXnsBaseAdjacencyHostid	1.3.6.1.4.1.18.3.5.10.8.1.2	OCTET STRING	read-only	Adjacent Router's/Host's hostid for which a hello has been received.
INT wfXnsBaseAdjacencyCost	1.3.6.1.4.1.18.3.5.10.8.1.3	INTEGER	read-only	Cost associated with reaching this adjacency.
INT wfXnsBaseAdjacencyAge	1.3.6.1.4.1.18.3.5.10.8.1.4	INTEGER	read-only	Adjacent Router/Host for which a hello has been received.
OCT wfXnsBaseAdjacencyIntf	1.3.6.1.4.1.18.3.5.10.8.1.5	OCTET STRING	read-only	XNS Network interface.
INT wfXnsBaseAdjacencyCct	1.3.6.1.4.1.18.3.5.10.8.1.6	INTEGER	read-only	Circuit on which hello was received.
wfXnsAggrStats	1.3.6.1.4.1.18.3.5.10.9
CTR wfXnsAggrInDatagrams	1.3.6.1.4.1.18.3.5.10.9.1	Counter	read-only	The total number of datagrams received
CTR wfXnsAggrOutDatagrams	1.3.6.1.4.1.18.3.5.10.9.2	Counter	read-only	The total number of datagrams sent (includes datagrams forwarded)
CTR wfXnsAggrFwdDatagrams	1.3.6.1.4.1.18.3.5.10.9.3	Counter	read-only	The total number of datagrams forwarded
CTR wfXnsAggrInDiscards	1.3.6.1.4.1.18.3.5.10.9.4	Counter	read-only	The total number of datagrams queued for reception that were discarded for resource reasons
CTR wfXnsAggrInHdrErrs	1.3.6.1.4.1.18.3.5.10.9.5	Counter	read-only	The total number of datagrams discarded because of errors in the XNS header.
CTR wfXnsAggrInAddrErrs	1.3.6.1.4.1.18.3.5.10.9.6	Counter	read-only	The total nmber of datagrams received whose destination address was invalid for this entity.
CTR wfXnsAggrInUnknownProtos	1.3.6.1.4.1.18.3.5.10.9.7	Counter	read-only	The total number of datagrams received locally which specified an unknown or unsupported protocol.
CTR wfXnsAggrOutDiscards	1.3.6.1.4.1.18.3.5.10.9.8	Counter	read-only	The total number of datagrams queued for transmission that were discarded for resource reasons.
CTR wfXnsAggrOutNoRoutes	1.3.6.1.4.1.18.3.5.10.9.9	Counter	read-only	The total number of datagrams queued for transmission thet were discarded because the destination was unreachable.

RFC description

Manages XNS (Xerox Network Services) protocol configuration and state on Wellfleet routers.

Start monitoring Legacy Wellfleet Communications (Bay Networks/Nortel) routers, XNS (adjacency/route-table status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-XNS-MIB

What Is Wellfleet-XNS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description