Wellfleet-IPX-MIB

All MIBs › Wellfleet-IPX-MIB

Category: Wellfleet BayNetworks Routing Protocols

Description: Monitors Wellfleet IPX protocol routing tables, SAP service advertisements, and protocol statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-IPX-MIB?

Wellfleet-IPX-MIB is a legacy Wellfleet Communications (later Bay Networks/Nortel) proprietary MIB configuring Novell IPX routing. Its objects cover a create/delete control, disable flag, state, configured/active host-number, network/service counts, log filter, network-table size, router name, primary network number, RIP method, max path count, host count, multiple-host-addresses flag, Novell certification-conformance flag, triggered-update enable, net-size-bound enable, max network-table size, table-fill notification, and a route-entry table (destination, ifIndex, metric). As a configuration/status MIB it lets an administrator confirm IPX routing parameters and network-table capacity on a legacy Wellfleet (Bay Networks/Nortel) router. It is deployed on legacy Wellfleet Communications (Bay Networks/Nortel) routers running IPX. Engineers can download the Wellfleet-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Wellfleet Communications (Bay Networks/Nortel) routers (IPX)

Monitoring Examples

An administrator checks wfIpxBaseNetTblSize and wfIpxBaseMaxNetTblSize to confirm IPX network-table capacity headroom on a legacy Wellfleet (Bay Networks/Nortel) router.

What Can Be Monitored

IPX routing configuration and network-table capacity

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Opaque

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfIpxGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfIpxBase	1.3.6.1.4.1.18.3.5.5.1
INT wfIpxBaseDelete	1.3.6.1.4.1.18.3.5.5.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete IPX.
INT wfIpxBaseDisable	1.3.6.1.4.1.18.3.5.5.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable IPX.
INT wfIpxBaseState	1.3.6.1.4.1.18.3.5.5.1.3	INTEGER	read-only	The current state of the entire IPX.
OCT wfIpxBaseCfgHostNumber	1.3.6.1.4.1.18.3.5.5.1.4	OCTET STRING	read-write	Host Number of Router and potential MAC address of box. This host number will be used to overide the default box generated hostnumber.
OCT wfIpxBaseActiveHostNumber	1.3.6.1.4.1.18.3.5.5.1.5	OCTET STRING	read-only	Host Number of Router and potential MAC address of box. This is not a restart variable because this will be filled in from the IPX code after reading it from either the configurable host number or from a box generated variable.
CTR wfIpxBaseNetCount	1.3.6.1.4.1.18.3.5.5.1.6	Counter	read-only	Count the total number of nets in the box.
CTR wfIpxBaseServiceCount	1.3.6.1.4.1.18.3.5.5.1.7	Counter	read-only	Count the total number of saps in the box.
INT wfIpxBaseLogFilter	1.3.6.1.4.1.18.3.5.5.1.8	INTEGER	read-write	Filter out some log messages, Default filters out debugs, info, and trace messages.
INT wfIpxBaseNetTblSize	1.3.6.1.4.1.18.3.5.5.1.9	INTEGER	read-write	Tell me how much space to set aside when creating the forwarding and network tables.
STR wfIpxBaseRouterName	1.3.6.1.4.1.18.3.5.5.1.10	DisplayString	read-write	The Name of the Router, used for IPXWAN
OCT wfIpxBasePrimaryNetNumber	1.3.6.1.4.1.18.3.5.5.1.11	OCTET STRING	read-write	The 'interfernal' network number, used for IPXWAN
INT wfIpxBaseRipMethod	1.3.6.1.4.1.18.3.5.5.1.12	INTEGER	read-write	Choose either Metric/Hops based or Tick based routing
INT wfIpxBaseMaximumPath	1.3.6.1.4.1.18.3.5.5.1.13	INTEGER	read-write	Declare Maximum number equal costs paths allowed for a given destination network
CTR wfIpxBaseHostCount	1.3.6.1.4.1.18.3.5.5.1.14	Counter	read-only	Count the total number of hosts in the box.
INT wfIpxBaseMultipleHostAddrs	1.3.6.1.4.1.18.3.5.5.1.15	INTEGER	read-write	Allow the user to configure one host/mac addr for the whole box (default) where, if configured, the CfgHostNumber is used (becomes ActiveHostNubmer) otherwise if left unconfigured the ActiveHostNumber is discerned from the backplane serial number. If Multiple host is Enabled and the host number is configured in the interface record the configured value is used as the hostid/mac addr of the interface (except Token Ring which can't go into promiscous mode, uses Token Ring Mac as hostid/mac of interface). If the host number in left unconfigured then the hostid/mac is gotten from the mac of the circuit.
INT wfIpxBaseNovellCertificationConformance	1.3.6.1.4.1.18.3.5.5.1.16	INTEGER	read-write	enable/disable novell certification, disable/enable wellfleet specifics
INT wfIpxBaseTrigUpdateEn	1.3.6.1.4.1.18.3.5.5.1.17	INTEGER	read-write	enable/disable triggered rip updates for Goldman Sax
INT wfIpxBaseNetSizeBoundEn	1.3.6.1.4.1.18.3.5.5.1.18	INTEGER	read-write	enable/disable maximum allowed size of the network table
INT wfIpxBaseMaxNetTblSize	1.3.6.1.4.1.18.3.5.5.1.19	INTEGER	read-write	maximum allowed size of the network table
INT wfIpxBaseNetTblFillNotify	1.3.6.1.4.1.18.3.5.5.1.20	INTEGER	read-write	notify when (configured) percentage is reached
wfIpxBaseRtEntryTable	1.3.6.1.4.1.18.3.5.5.2		not-accessible	The table of Elements in IPX's routing table
wfIpxBaseRtEntry	1.3.6.1.4.1.18.3.5.5.2.1		not-accessible	An entry in the Routing Table
OCT wfIpxBaseRouteDest	1.3.6.1.4.1.18.3.5.5.2.1.1	OCTET STRING	read-only	Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
INT wfIpxBaseRouteIfIndex	1.3.6.1.4.1.18.3.5.5.2.1.2	INTEGER	read-only	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
INT wfIpxBaseRouteMetric	1.3.6.1.4.1.18.3.5.5.2.1.3	INTEGER	read-only	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OCT wfIpxBaseRouteNextHopNetwork	1.3.6.1.4.1.18.3.5.5.2.1.4	OCTET STRING	read-only	In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IPX address on that interface.
OCT wfIpxBaseRouteNextHopHost	1.3.6.1.4.1.18.3.5.5.2.1.5	OCTET STRING	read-only	Full network.host_id address of nexthop host for this network.
INT wfIpxBaseRouteType	1.3.6.1.4.1.18.3.5.5.2.1.6	INTEGER	read-only	The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IPX architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. nagement stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
INT wfIpxBaseRouteProto	1.3.6.1.4.1.18.3.5.5.2.1.7	INTEGER	read-only	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
INT wfIpxBaseRouteAge	1.3.6.1.4.1.18.3.5.5.2.1.8	INTEGER	read-only	The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OCT wfIpxBaseRouteInfo	1.3.6.1.4.1.18.3.5.5.2.1.9	OCTET STRING	read-only	A user-defined string which describes this Route entry
wfIpxBaseSapEntryTable	1.3.6.1.4.1.18.3.5.5.3		not-accessible	The table of Elements in IPX's SAP table
wfIpxBaseSapEntry	1.3.6.1.4.1.18.3.5.5.3.1		not-accessible	An entry in the Routing Table
OCT wfIpxBaseSapType	1.3.6.1.4.1.18.3.5.5.3.1.1	OCTET STRING	read-only	Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
OCT wfIpxBaseSapNetwork	1.3.6.1.4.1.18.3.5.5.3.1.2	OCTET STRING	read-only	The network address of this service.
OCT wfIpxBaseSapHost	1.3.6.1.4.1.18.3.5.5.3.1.3	OCTET STRING	read-only	The host address for this service.
OCT wfIpxBaseSapSocket	1.3.6.1.4.1.18.3.5.5.3.1.4	OCTET STRING	read-only	The socket for this particular service
STR wfIpxBaseSapName	1.3.6.1.4.1.18.3.5.5.3.1.5	DisplayString	read-only	The server name.
INT wfIpxBaseSapAge	1.3.6.1.4.1.18.3.5.5.3.1.6	INTEGER	read-only	The number of seconds since SAP entry has been updated.
INT wfIpxBaseSapHops	1.3.6.1.4.1.18.3.5.5.3.1.7	INTEGER	read-only	The number of Hops away service is from router.
OCT wfIpxBaseSapIndex	1.3.6.1.4.1.18.3.5.5.3.1.8	OCTET STRING	read-only	Index string comprised of type.network.hostid.socket used to uniquely index this server.
OCT wfIpxBaseSapIntf	1.3.6.1.4.1.18.3.5.5.3.1.9	OCTET STRING	read-only	Network Address of Nexthop Interface.
wfIpxInterfaceTable	1.3.6.1.4.1.18.3.5.5.4		not-accessible	The network interface record
wfIpxInterfaceEntry	1.3.6.1.4.1.18.3.5.5.4.1		not-accessible	An entry in the Routing Table
INT wfIpxInterfaceIndex	1.3.6.1.4.1.18.3.5.5.4.1.1	INTEGER	read-only	A unique value for each IPX interface. Its value ranges between 1 and the value of MAXCIRCUITS.
INT wfIpxInterfaceDelete	1.3.6.1.4.1.18.3.5.5.4.1.2	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an IPX interface.
INT wfIpxInterfaceDisable	1.3.6.1.4.1.18.3.5.5.4.1.3	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an IPX interface.
INT wfIpxInterfaceState	1.3.6.1.4.1.18.3.5.5.4.1.4	INTEGER	read-only	The current state of the IPX interface
INT wfIpxInterfaceCircuit	1.3.6.1.4.1.18.3.5.5.4.1.5	INTEGER	read-only	The Circuit Number that this interface runs over
OCT wfIpxInterfaceNetworkNumber	1.3.6.1.4.1.18.3.5.5.4.1.6	OCTET STRING	read-only	The IPX Address to which this entry's addressing information pertains
INT wfIpxInterfaceCost	1.3.6.1.4.1.18.3.5.5.4.1.7	INTEGER	read-write	The Cost associated with the IPX Address of this entry
INT wfIpxInterfaceXsumOn	1.3.6.1.4.1.18.3.5.5.4.1.8	INTEGER	read-write	Flag for checksums
INT wfIpxInterfaceCfgEncaps	1.3.6.1.4.1.18.3.5.5.4.1.9	INTEGER	read-write	The encapsulation method associated with this interface chosen by the user but not necessarily the one used. (See wfIpxInterfaceEncaps)
OCT wfIpxInterfaceMacAddress	1.3.6.1.4.1.18.3.5.5.4.1.10	OCTET STRING	read-only	The MacAddress of this interface this port will receive or transmit.
OCT wfIpxInterfaceSMDSGroupAddress	1.3.6.1.4.1.18.3.5.5.4.1.11	OCTET STRING	read-only	The SMDS group address
INT wfIpxInterfaceMaxInfo	1.3.6.1.4.1.18.3.5.5.4.1.12	INTEGER	read-only	The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
CTR wfIpxInterfaceInReceives	1.3.6.1.4.1.18.3.5.5.4.1.13	Counter	read-only	The total number of input datagrams received from interfaces, including those received in error.
CTR wfIpxInterfaceInHdrErrors	1.3.6.1.4.1.18.3.5.5.4.1.14	Counter	read-only	The number of input datagrams discarded due to errors in their IPX headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IPX options, etc.
CTR wfIpxInterfaceInAddrErrors	1.3.6.1.4.1.18.3.5.5.4.1.15	Counter	read-only	The number of input datagrams discarded because the IPX address in their IPX header's destination field was not a valid address to be received at this entity.
CTR wfIpxInterfaceForwDatagrams	1.3.6.1.4.1.18.3.5.5.4.1.16	Counter	read-only	The number of input datagrams for which this entity was not their final IPX destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IPX Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
CTR wfIpxInterfaceInUnknownProtos	1.3.6.1.4.1.18.3.5.5.4.1.17	Counter	read-only	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
CTR wfIpxInterfaceInDiscards	1.3.6.1.4.1.18.3.5.5.4.1.18	Counter	read-only	The number of input IPX datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
CTR wfIpxInterfaceInDelivers	1.3.6.1.4.1.18.3.5.5.4.1.19	Counter	read-only	The total number of input datagrams successfully delivered to IPX user-protocols.
CTR wfIpxInterfaceOutRequests	1.3.6.1.4.1.18.3.5.5.4.1.20	Counter	read-only	The total number of IPX datagrams which local IPX user-protocols supplied to IPX in requests for transmission. Note that this counter does not include any datagrams counted in ipxForwDatagrams.
CTR wfIpxInterfaceOutDiscards	1.3.6.1.4.1.18.3.5.5.4.1.21	Counter	read-only	The number of output IPX datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
CTR wfIpxInterfaceOutNoRoutes	1.3.6.1.4.1.18.3.5.5.4.1.22	Counter	read-only	The number of IPX datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
INT wfIpxInterfaceTrEndStation	1.3.6.1.4.1.18.3.5.5.4.1.23	INTEGER	read-write	Source Routing flag
INT wfIpxInterfaceNetbiosAccept	1.3.6.1.4.1.18.3.5.5.4.1.24	INTEGER	read-write	Accept NetBios All Networks Broadcast Packets
INT wfIpxInterfaceNetbiosDeliver	1.3.6.1.4.1.18.3.5.5.4.1.25	INTEGER	read-write	Deliver NetBios All Networks Broadcast Packets
INT wfIpxInterfaceWanSapPeriod	1.3.6.1.4.1.18.3.5.5.4.1.26	INTEGER	read-write	Configurable timer for SAP updates over LAN-WAN
OCT wfIpxInterfaceFRBcast	1.3.6.1.4.1.18.3.5.5.4.1.27	OCTET STRING	read-write	Configurable Frame Relay broadcast address
OCT wfIpxInterfaceFRMcast	1.3.6.1.4.1.18.3.5.5.4.1.28	OCTET STRING	read-write	Configurable Frame Relay multicast address
INT wfIpxInterfaceEncaps	1.3.6.1.4.1.18.3.5.5.4.1.29	INTEGER	read-only	The Active or final encapsulation method associated with this interface as determined by the router's implementation of encapsulation algorithms (rules, restrictions) based on media type.
INT wfIpxInterfaceSplit	1.3.6.1.4.1.18.3.5.5.4.1.30	INTEGER	read-write	Enable or Disable Split Horizon algorithm for this interface Comes into to play for non full-meshed WAN networks (Frame Relay)
CTR wfIpxInterfaceCacheHit	1.3.6.1.4.1.18.3.5.5.4.1.31	Counter	read-only	This counter was added for performance investigation under the same category as the number of Nets and number SAP counters. THis counter Will provide information that will determine the usefullness of caching.
INT wfIpxInterfaceIpxWanDisable	1.3.6.1.4.1.18.3.5.5.4.1.32	INTEGER	read-write	Enable IPXWAN negotiations
OCT wfIpxInterfaceIpxWanCommonNet	1.3.6.1.4.1.18.3.5.5.4.1.33	OCTET STRING	read-write	Common network number for IPXWAN link
INT wfIpxInterfaceIpxWanTimeOut	1.3.6.1.4.1.18.3.5.5.4.1.34	INTEGER	read-write	IPXWAN timer out period for negotiation
INT wfIpxInterfaceIpxWanLinkRetry	1.3.6.1.4.1.18.3.5.5.4.1.35	INTEGER	read-write	IPXWAN number of times to retry negotiation
INT wfIpxInterfaceWanRipPeriod	1.3.6.1.4.1.18.3.5.5.4.1.36	INTEGER	read-write	Configurable timer for routing updates LAN-WAN
OCT wfIpxInterfaceCfgHostNumber	1.3.6.1.4.1.18.3.5.5.4.1.37	OCTET STRING	read-write	Host Number and possible MAC address of interface. This host number will be used to overide the default cct generated hostnumber (if Multiple Host enabled). This field is not valid/used if the IpxBaseMultipleHost is not enabled, if the media is non-promiscuous (Token Ring) or if the field length is not 6 bytes.
OCT wfIpxInterfaceActiveHostNumber	1.3.6.1.4.1.18.3.5.5.4.1.38	OCTET STRING	read-only	Host Number and possible MAC address of interface. This field will always be filled in by the router and lists the HostNumber of each Interface.
wfIpxRipIntfTable	1.3.6.1.4.1.18.3.5.5.5		not-accessible	The list of RIP interfaces
wfIpxRipIntfEntry	1.3.6.1.4.1.18.3.5.5.5.1		not-accessible	An entry in the Routing Table
INT wfIpxRipInterfaceDelete	1.3.6.1.4.1.18.3.5.5.5.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an RIP Interface instance.
INT wfIpxRipInterfaceDisable	1.3.6.1.4.1.18.3.5.5.5.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an RIP instance.
INT wfIpxRipInterfaceState	1.3.6.1.4.1.18.3.5.5.5.1.3	INTEGER	read-only	The current state of RIP on this interface.
OCT wfIpxRipInterfaceIndex	1.3.6.1.4.1.18.3.5.5.5.1.4	OCTET STRING	read-only	The IPX interface to run RIP on (instance id ).
INT wfIpxRipInterfaceSupply	1.3.6.1.4.1.18.3.5.5.5.1.5	INTEGER	read-write	Transmit RIP packets.
INT wfIpxRipInterfaceListen	1.3.6.1.4.1.18.3.5.5.5.1.6	INTEGER	read-write	Receive RIP packets.
wfIpxAdjacentHostTable	1.3.6.1.4.1.18.3.5.5.6		not-accessible	Table of configured Static Hosts This is implemented for hosts that are accessible over Frame Relay, SMDS etc. where a corresponding DLCI address must be configured for a nexthop host.
wfIpxAdjacentHostEntry	1.3.6.1.4.1.18.3.5.5.6.1		not-accessible	An entry in the Adjacent Host Table
INT wfIpxAhDelete	1.3.6.1.4.1.18.3.5.5.6.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX Static Host.
INT wfIpxAhDisable	1.3.6.1.4.1.18.3.5.5.6.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX Static Route.
OCT wfIpxAhTargHostNetwork	1.3.6.1.4.1.18.3.5.5.6.1.3	OCTET STRING	read-only	The network address of the static host.
OCT wfIpxAhTargHostId	1.3.6.1.4.1.18.3.5.5.6.1.4	OCTET STRING	read-only	The Address of this static host.
OCT wfIpxAhNextHopIntf	1.3.6.1.4.1.18.3.5.5.6.1.5	OCTET STRING	read-write	The Next Hop Interface Network Address
OCT wfIpxAhDlci	1.3.6.1.4.1.18.3.5.5.6.1.6	OCTET STRING	read-write	The next Hop Host address
wfIpxStaticRouteTable	1.3.6.1.4.1.18.3.5.5.7		not-accessible	The list of static routes used for Configuring IPX
wfIpxStaticRouteEntry	1.3.6.1.4.1.18.3.5.5.7.1		not-accessible	An entry in the Routing Table
INT wfIpxSrDelete	1.3.6.1.4.1.18.3.5.5.7.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX Static Route.
INT wfIpxSrDisable	1.3.6.1.4.1.18.3.5.5.7.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX Static Route.
OCT wfIpxSrTargNetwork	1.3.6.1.4.1.18.3.5.5.7.1.3	OCTET STRING	read-only	The Address of this static route
INT wfIpxSrCost	1.3.6.1.4.1.18.3.5.5.7.1.4	INTEGER	read-write	The Cost of this Static Route in Hops
OCT wfIpxSrNextHopNetwork	1.3.6.1.4.1.18.3.5.5.7.1.5	OCTET STRING	read-only	The Next Hop IPX Address
OCT wfIpxSrNextHopHost	1.3.6.1.4.1.18.3.5.5.7.1.6	OCTET STRING	read-write	The next Hop Host address
INT wfIpxSrTargNetworkRt	1.3.6.1.4.1.18.3.5.5.7.1.7	INTEGER	read-only	The Route Identifier Which numbered route this is to be
OCT wfIpxSrTickCost	1.3.6.1.4.1.18.3.5.5.7.1.8	OCTET STRING	read-write	The Cost of this Static Route in Ticks
wfIpxNetBiosStaticRouteTable	1.3.6.1.4.1.18.3.5.5.8		not-accessible	The list of static routes used for Configuring IPX
wfIpxNetBiosStaticRouteEntry	1.3.6.1.4.1.18.3.5.5.8.1		not-accessible	An entry in the Routing Table
INT wfIpxNetBiosSrDelete	1.3.6.1.4.1.18.3.5.5.8.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX NETBIOS Static Route.
INT wfIpxNetBiosSrDisable	1.3.6.1.4.1.18.3.5.5.8.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX NETBIOS Static Route.
OCT wfIpxNetBiosSrTargNetwork	1.3.6.1.4.1.18.3.5.5.8.1.3	OCTET STRING	read-only	The Address of this static route
STR wfIpxNetBiosSrName	1.3.6.1.4.1.18.3.5.5.8.1.4	DisplayString	read-write	The Name of the Target Server
OCT wfIpxNetBiosSrIntf	1.3.6.1.4.1.18.3.5.5.8.1.5	OCTET STRING	read-only	The Interface Identifier for this static entry
INT wfIpxNetBiosSrIndex	1.3.6.1.4.1.18.3.5.5.8.1.6	INTEGER	read-only	The Entry Index Which identifies this is entry
wfIpxSapNetLvlFilterTable	1.3.6.1.4.1.18.3.5.5.9		not-accessible	The list of Network Level SAP Filters
wfIpxSapNetLvlFilter	1.3.6.1.4.1.18.3.5.5.9.1		not-accessible	An entry in the Filter Table
INT wfIpxSapNetLvlDelete	1.3.6.1.4.1.18.3.5.5.9.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX Sap network level filter.
INT wfIpxSapNetLvlDisable	1.3.6.1.4.1.18.3.5.5.9.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX network level SAP filter.
OCT wfIpxSapNetLvlTargNetwork	1.3.6.1.4.1.18.3.5.5.9.1.3	OCTET STRING	read-write	The Target Network address to monitor
OCT wfIpxSapNetLvlType	1.3.6.1.4.1.18.3.5.5.9.1.4	OCTET STRING	read-write	The Type of service to monitor
INT wfIpxSapNetLvlAction	1.3.6.1.4.1.18.3.5.5.9.1.5	INTEGER	read-write	The Action to take Advertise or not Advertise
OCT wfIpxSapNetLvlIntf	1.3.6.1.4.1.18.3.5.5.9.1.6	OCTET STRING	read-only	The Interface identifier for this filter
INT wfIpxSapNetLvlIndex	1.3.6.1.4.1.18.3.5.5.9.1.7	INTEGER	read-only	The Filter Index .
wfIpxSapServtLvlFilterTable	1.3.6.1.4.1.18.3.5.5.10		not-accessible	The list of Server Level SAP Filters
wfIpxSapServLvlFilter	1.3.6.1.4.1.18.3.5.5.10.1		not-accessible	An entry in the Filter Table
INT wfIpxSapServLvlDelete	1.3.6.1.4.1.18.3.5.5.10.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX server-level SAP filter.
INT wfIpxSapServLvlDisable	1.3.6.1.4.1.18.3.5.5.10.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX server-level SAP filter.
STR wfIpxSapServLvlTargServer	1.3.6.1.4.1.18.3.5.5.10.1.3	DisplayString	read-write	The Server Name to monitor.
OCT wfIpxSapServLvlType	1.3.6.1.4.1.18.3.5.5.10.1.4	OCTET STRING	read-write	Type of service File server, Printer, etc...
INT wfIpxSapServLvlAction	1.3.6.1.4.1.18.3.5.5.10.1.5	INTEGER	read-write	Associated Action (advertise or ignore )
OCT wfIpxSapServLvlIntf	1.3.6.1.4.1.18.3.5.5.10.1.6	OCTET STRING	read-only	The Interface identifier for this filter
INT wfIpxSapServLvlIndex	1.3.6.1.4.1.18.3.5.5.10.1.7	INTEGER	read-only	The Filter Index .
wfIpxTrafficFilterTable	1.3.6.1.4.1.18.3.5.5.11		not-accessible	IPX Traffic Filters
wfIpxTrafficFilterEntry	1.3.6.1.4.1.18.3.5.5.11.1		not-accessible	A traffic filter definition
INT wfIpxTrafficFilterCreate	1.3.6.1.4.1.18.3.5.5.11.1.1	INTEGER	read-write	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
INT wfIpxTrafficFilterEnable	1.3.6.1.4.1.18.3.5.5.11.1.2	INTEGER	read-write	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
INT wfIpxTrafficFilterStatus	1.3.6.1.4.1.18.3.5.5.11.1.3	INTEGER	read-only	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule.
CTR wfIpxTrafficFilterCounter	1.3.6.1.4.1.18.3.5.5.11.1.4	Counter	read-only	The number of received packets that have matched this rule.
OPA wfIpxTrafficFilterDefinition	1.3.6.1.4.1.18.3.5.5.11.1.5	Opaque	read-write	The filter rule definition.
INT wfIpxTrafficFilterReserved	1.3.6.1.4.1.18.3.5.5.11.1.6	INTEGER	read-only	Reserved field.
OCT wfIpxTrafficFilterInterface	1.3.6.1.4.1.18.3.5.5.11.1.7	OCTET STRING	read-only	The network address of the IPX interface to which this filter is applied.
INT wfIpxTrafficFilterCircuit	1.3.6.1.4.1.18.3.5.5.11.1.8	INTEGER	read-only	The ID of the Circuit to which the filter is applied.
INT wfIpxTrafficFilterRuleNumber	1.3.6.1.4.1.18.3.5.5.11.1.9	INTEGER	read-only	ID for the rule.
INT wfIpxTrafficFilterFragment	1.3.6.1.4.1.18.3.5.5.11.1.10	INTEGER	read-only	Fragment number - for large rules.
STR wfIpxTrafficFilterName	1.3.6.1.4.1.18.3.5.5.11.1.11	DisplayString	read-write	Name of the rule number.
wfIpxStaticSapTable	1.3.6.1.4.1.18.3.5.5.12		not-accessible	The table of Static Services
wfIpxStaticSapEntry	1.3.6.1.4.1.18.3.5.5.12.1		not-accessible	An entry in the Routing Table
INT wfIpxStaticSapDelete	1.3.6.1.4.1.18.3.5.5.12.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX Static SAP.
INT wfIpxStaticSapDisable	1.3.6.1.4.1.18.3.5.5.12.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this IPX Static Route.
OCT wfIpxStaticSapType	1.3.6.1.4.1.18.3.5.5.12.1.3	OCTET STRING	read-only	Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
OCT wfIpxStaticSapNetwork	1.3.6.1.4.1.18.3.5.5.12.1.4	OCTET STRING	read-only	The network address of this service.
OCT wfIpxStaticSapHost	1.3.6.1.4.1.18.3.5.5.12.1.5	OCTET STRING	read-write	The host address for this service.
OCT wfIpxStaticSapSocket	1.3.6.1.4.1.18.3.5.5.12.1.6	OCTET STRING	read-only	The socket for this particular service
STR wfIpxStaticSapName	1.3.6.1.4.1.18.3.5.5.12.1.7	DisplayString	read-write	The server name.
INT wfIpxStaticSapHops	1.3.6.1.4.1.18.3.5.5.12.1.8	INTEGER	read-write	The number of Hops away service is from router.
OCT wfIpxStaticSapIndex	1.3.6.1.4.1.18.3.5.5.12.1.9	OCTET STRING	read-only	Index string comprised of intf1.type.network.hostid.socket. Makes sorting easier and its a ah work around.
OCT wfIpxStaticSapIntf	1.3.6.1.4.1.18.3.5.5.12.1.10	OCTET STRING	read-only	Network Address of Nexthop Interface.
INT wfIpxStaticSapCircuit	1.3.6.1.4.1.18.3.5.5.12.1.11	INTEGER	read-only	Circuit of Nexthop Interface.
wfIpxBaseRt2EntryTable	1.3.6.1.4.1.18.3.5.5.13		not-accessible	The table of Elements in IPX's routing table
wfIpxBaseRt2Entry	1.3.6.1.4.1.18.3.5.5.13.1		not-accessible	An entry in the Routing Table
OCT wfIpxBaseRoute2Dest	1.3.6.1.4.1.18.3.5.5.13.1.1	OCTET STRING	read-only	Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
INT wfIpxBaseRoute2IfIndex	1.3.6.1.4.1.18.3.5.5.13.1.2	INTEGER	read-only	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
INT wfIpxBaseRoute2Ticks	1.3.6.1.4.1.18.3.5.5.13.1.3	INTEGER	read-only	The primary routing metric (in ticks) for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
INT wfIpxBaseRoute2Hops	1.3.6.1.4.1.18.3.5.5.13.1.4	INTEGER	read-only	The primary routing metric (in hops) for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OCT wfIpxBaseRoute2NextHopNetwork	1.3.6.1.4.1.18.3.5.5.13.1.5	OCTET STRING	read-only	In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IPX address on that interface.
OCT wfIpxBaseRoute2NextHopHost	1.3.6.1.4.1.18.3.5.5.13.1.6	OCTET STRING	read-only	Full network.host_id address of nexthop host for this network.
INT wfIpxBaseRoute2Type	1.3.6.1.4.1.18.3.5.5.13.1.7	INTEGER	read-only	The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IPX architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. nagement stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
INT wfIpxBaseRoute2Proto	1.3.6.1.4.1.18.3.5.5.13.1.8	INTEGER	read-only	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
INT wfIpxBaseRoute2Age	1.3.6.1.4.1.18.3.5.5.13.1.9	INTEGER	read-only	The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OCT wfIpxBaseRoute2Info	1.3.6.1.4.1.18.3.5.5.13.1.10	OCTET STRING	read-only	A user-defined string which describes this Route entry
wfIpxAggrStats	1.3.6.1.4.1.18.3.5.5.14
CTR wfIpxAggrInDatagrams	1.3.6.1.4.1.18.3.5.5.14.1	Counter	read-only	The total number of datagrams received
CTR wfIpxAggrOutDatagrams	1.3.6.1.4.1.18.3.5.5.14.2	Counter	read-only	The total number of datagrams sent (includes datagrams forwarded)
CTR wfIpxAggrFwdDatagrams	1.3.6.1.4.1.18.3.5.5.14.3	Counter	read-only	The total number of datagrams forwarded
CTR wfIpxAggrInDiscards	1.3.6.1.4.1.18.3.5.5.14.4	Counter	read-only	The total number of datagrams queued for reception that were discarded for resource reasons
CTR wfIpxAggrInHdrErrs	1.3.6.1.4.1.18.3.5.5.14.5	Counter	read-only	The total number of datagrams discarded because of errors in the IPX header.
CTR wfIpxAggrInAddrErrs	1.3.6.1.4.1.18.3.5.5.14.6	Counter	read-only	The total nmber of datagrams received whose destination address was invalid for this entity.
CTR wfIpxAggrInUnknownProtos	1.3.6.1.4.1.18.3.5.5.14.7	Counter	read-only	The total number of datagrams received locally which specified an unknown or unsupported protocol.
CTR wfIpxAggrOutDiscards	1.3.6.1.4.1.18.3.5.5.14.8	Counter	read-only	The total number of datagrams queued for transmission that were discarded for resource reasons.
CTR wfIpxAggrOutNoRoutes	1.3.6.1.4.1.18.3.5.5.14.9	Counter	read-only	The total number of datagrams queued for transmission thet were discarded because the destination was unreachable.

RFC description

Monitors and configures Internetwork Packet Exchange (IPX) protocol settings and host number configuration.

Start monitoring Legacy Wellfleet Communications (Bay Networks/Nortel) routers, IPX (network-table/route-entry status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-IPX-MIB

What Is Wellfleet-IPX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description