Wellfleet-SNMPEXT-MIB

All MIBs › Wellfleet-SNMPEXT-MIB

Category: Wellfleet BayNetworks System Management

Description: Provides Wellfleet SNMP extension objects for enhanced trap generation and management information access.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-SNMPEXT-MIB?

Wellfleet-SNMPEXT-MIB is a Wellfleet router MIB that provides vendor extensions to the router's SNMP agent itself, adding enhanced trap-generation controls and additional access to management information beyond the standard SNMP framework. It exposes configuration objects controlling which traps are generated and how the agent exposes extended MIB data, essentially management-of-management data rather than a specific hardware subsystem. Its monitoring relevance is largely in confirming the software configuration status of the management/trap subsystem - verifying that trap generation is enabled as expected so that other fault conditions elsewhere in the router are properly reported. It functions as an extension layered directly on the standard SNMP/SNMPv2 framework MIBs. It is used in Wellfleet router deployments where administrators need finer control over event notification behavior than the base SNMP agent provides. Engineers can download the Wellfleet-SNMPEXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-SNMPEXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks multiprotocol router

Monitoring Examples

No sample objects were provided for this module; generally an operator would check the trap-generation control objects to confirm extended traps are enabled, since a misconfigured setting here would silently suppress fault notifications from the rest of the device.

What Can Be Monitored

extended trap generation configuration
SNMP agent extension status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress

From RFC1213-MIB

DisplayString

From SNMPv2-TC

AutonomousType

From Wellfleet-COMMON-MIB

wfSnmpGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfSnmp	1.3.6.1.4.1.18.3.5.3.5.1
INT wfSnmpDisable	1.3.6.1.4.1.18.3.5.3.5.1.1	INTEGER	read-write	Enables or disables the SNMP subsystem
INT wfSnmpUseLock	1.3.6.1.4.1.18.3.5.3.5.1.2	INTEGER	read-write	Flag to indicate whether set locking mechanism is enabled or disabled. Set locking permits only one manager to perform SNMP sets to the system at any given time. A genErr will be returned to managers that are locked out.
IP wfSnmpLockAddress	1.3.6.1.4.1.18.3.5.3.5.1.3	IpAddress	read-write	Address of remote manager that is enforcing the lock. This value is set by the SNMP agent. Remote managers are only allowed to clear it.
INT wfSnmpLockTimeOut	1.3.6.1.4.1.18.3.5.3.5.1.4	INTEGER	read-write	The maximum time (in minutes) a lock can be idle before it is cleared. An idle period is a time interval with no sets from the locking manager.
INT wfSnmpAuth	1.3.6.1.4.1.18.3.5.3.5.1.5	INTEGER	read-only	The type of authentication used by the agent (set through console interface).
CTR wfSnmpInPkts	1.3.6.1.4.1.18.3.5.3.5.1.6	Counter	read-only	Total number of PDUs received by SNMP from transport entity
CTR wfSnmpOutPkts	1.3.6.1.4.1.18.3.5.3.5.1.7	Counter	read-only	Total number of PDUs sent by SNMP to transport entity
CTR wfSnmpInBadVersions	1.3.6.1.4.1.18.3.5.3.5.1.8	Counter	read-only	Total number of PDUs requesting unsupported versions
CTR wfSnmpInBadCommunityNames	1.3.6.1.4.1.18.3.5.3.5.1.9	Counter	read-only	Total number of PDUs which had an invalid community string
CTR wfSnmpInBadCommunityUses	1.3.6.1.4.1.18.3.5.3.5.1.10	Counter	read-only	Total number of PDUs requesting an operation unsupported by the community
CTR wfSnmpInASNParseErrs	1.3.6.1.4.1.18.3.5.3.5.1.11	Counter	read-only	Total number of ASN.1 parsing errors during decoding
CTR wfSnmpInBadTypes	1.3.6.1.4.1.18.3.5.3.5.1.12	Counter	read-only	Total number of PDUs having an unknown PDU type
CTR wfSnmpInTooBigs	1.3.6.1.4.1.18.3.5.3.5.1.13	Counter	read-only	Total number of PDUs delivered with ErrorStatus='tooBig
CTR wfSnmpInNoSuchNames	1.3.6.1.4.1.18.3.5.3.5.1.14	Counter	read-only	Total number of PDUs delivered with ErrorStatus='noSuchName
CTR wfSnmpInBadValues	1.3.6.1.4.1.18.3.5.3.5.1.15	Counter	read-only	Total number of PDUs delivered with ErrorStatus='badValue
CTR wfSnmpInReadOnlys	1.3.6.1.4.1.18.3.5.3.5.1.16	Counter	read-only	Total number of PDUs delivered with ErrorStatus='readOnly
CTR wfSnmpInGenErrs	1.3.6.1.4.1.18.3.5.3.5.1.17	Counter	read-only	Total number of PDUs delivered with ErrorStatus='genErr
CTR wfSnmpInTotalReqVars	1.3.6.1.4.1.18.3.5.3.5.1.18	Counter	read-only	Total number of MIB objects retrieved successfully by the agent
CTR wfSnmpInTotalSetVars	1.3.6.1.4.1.18.3.5.3.5.1.19	Counter	read-only	Total number of MIB objects which have been SET successfully
CTR wfSnmpInGetRequests	1.3.6.1.4.1.18.3.5.3.5.1.20	Counter	read-only	Total number of Get-Request PDUS accepted and processed
CTR wfSnmpInGetNexts	1.3.6.1.4.1.18.3.5.3.5.1.21	Counter	read-only	Total number of GetNext-Request PDUS accepted and processed
CTR wfSnmpInSetRequests	1.3.6.1.4.1.18.3.5.3.5.1.22	Counter	read-only	Total number of Set-Request PDUS accepted and processed
CTR wfSnmpInGetResponses	1.3.6.1.4.1.18.3.5.3.5.1.23	Counter	read-only	Total number of GetResponse PDUs accepted and processed
CTR wfSnmpInTraps	1.3.6.1.4.1.18.3.5.3.5.1.24	Counter	read-only	Total number of Trap PDUs accepted and processed
CTR wfSnmpOutTooBigs	1.3.6.1.4.1.18.3.5.3.5.1.25	Counter	read-only	Total number of PDUs generated by the agent with ErrorStatus= 'tooBig
CTR wfSnmpOutNoSuchNames	1.3.6.1.4.1.18.3.5.3.5.1.26	Counter	read-only	Total number of PDUs generated by the agent with ErrorStatus= 'noSuchName
CTR wfSnmpOutBadValues	1.3.6.1.4.1.18.3.5.3.5.1.27	Counter	read-only	Total number of PDUs generated by the agent with ErrorStatus= 'badValue
CTR wfSnmpOutReadOnlys	1.3.6.1.4.1.18.3.5.3.5.1.28	Counter	read-only	Total number of PDUs generated by the agent with ErrorStatus= 'readOnly
CTR wfSnmpOutGenErrs	1.3.6.1.4.1.18.3.5.3.5.1.29	Counter	read-only	Total number of PDUs generated by the agent with ErrorStatus= 'genErr
CTR wfSnmpOutGetRequests	1.3.6.1.4.1.18.3.5.3.5.1.30	Counter	read-only	Total number of Get-Request PDUs generated by the agent
CTR wfSnmpOutGetNexts	1.3.6.1.4.1.18.3.5.3.5.1.31	Counter	read-only	Total number of Get-Next-Request PDUs generated by the agent
CTR wfSnmpOutSetRequests	1.3.6.1.4.1.18.3.5.3.5.1.32	Counter	read-only	Total number of Set-Request PDUs generated by the agent
CTR wfSnmpOutGetResponses	1.3.6.1.4.1.18.3.5.3.5.1.33	Counter	read-only	Total number of Get-Response PDUs generated by the agent
CTR wfSnmpOutTraps	1.3.6.1.4.1.18.3.5.3.5.1.34	Counter	read-only	Total number of Trap PDUs generated by the agent
INT wfSnmpEnableAuthTraps	1.3.6.1.4.1.18.3.5.3.5.1.35	INTEGER	read-write	Idicates whether agent can generate Authentication Failure Traps
INT wfSnmpTrapDebug	1.3.6.1.4.1.18.3.5.3.5.1.36	INTEGER	read-write	This attribute controls the specific trap filter for debug messages
INT wfSnmpTrapTrace	1.3.6.1.4.1.18.3.5.3.5.1.37	INTEGER	read-write	This attribute controls the specific trap filter for trace messages
INT wfSnmpTrapInfo	1.3.6.1.4.1.18.3.5.3.5.1.38	INTEGER	read-write	This attribute controls the specific trap filter for informational messages
INT wfSnmpTrapWarn	1.3.6.1.4.1.18.3.5.3.5.1.39	INTEGER	read-write	This attribute controls the specific trap filter for warning messages
INT wfSnmpTrapFault	1.3.6.1.4.1.18.3.5.3.5.1.40	INTEGER	read-write	This attribute controls the specific trap filter for fault messages
INT wfSnmpIpTos	1.3.6.1.4.1.18.3.5.3.5.1.41	INTEGER	read-write	The Type Of Service value set in the IP datagram specifies to the Internet transport layer how the datagram should be handled. For SNMP high reliability Type Of Service is important.
INT wfSnmpPropEncryption	1.3.6.1.4.1.18.3.5.3.5.1.42	INTEGER	read-only	The encryption algorithm to use in proprietary security
INT wfSnmpPDUThreads	1.3.6.1.4.1.18.3.5.3.5.1.43	INTEGER	read-write	The number of EMANATE Master Agent PDU thread gates
GAU wfSnmpBusyPDUThreads	1.3.6.1.4.1.18.3.5.3.5.1.44	Gauge	read-only	The current number of busy EMANATE Master Agent PDU thread gates
INT wfSnmpLogLevel	1.3.6.1.4.1.18.3.5.3.5.1.45	INTEGER	read-write	The log level enabled for EMANATE log messages
INT wfSnmpDelete	1.3.6.1.4.1.18.3.5.3.5.1.46	INTEGER	read-write	Create/Delete parameter. Default is created.
OCT wfSnmpScopeDelimiter	1.3.6.1.4.1.18.3.5.3.5.1.47	OCTET STRING	read-write	The character used to separate the naming scope from a scoped community name in the community configuration table. Note that any attempt to configure a community containing this delimiter will be rejected. further, any attempt to change the value of this object to a value which is already used in an existing community string will be rejected.
INT wfSnmpMaxInPktChain	1.3.6.1.4.1.18.3.5.3.5.1.48	INTEGER	read-write	The maximum number of packets allowed to be processed by snmp gate in a single running state.
wfSnmpCommTable	1.3.6.1.4.1.18.3.5.3.5.2		not-accessible	A table containing valid management communities
wfSnmpCommEntry	1.3.6.1.4.1.18.3.5.3.5.2.1		not-accessible	Information about a particular community
INT wfSnmpCommDelete	1.3.6.1.4.1.18.3.5.3.5.2.1.1	INTEGER	read-write	A flag to indicate community instance deletion
INT wfSnmpCommIndex	1.3.6.1.4.1.18.3.5.3.5.2.1.2	INTEGER	read-only	A unique numeric value that has a one to one correspondence with the community name
STR wfSnmpCommName	1.3.6.1.4.1.18.3.5.3.5.2.1.3	DisplayString	read-write	Community name
INT wfSnmpCommAccess	1.3.6.1.4.1.18.3.5.3.5.2.1.4	INTEGER	read-write	Community access mode
OID wfSnmpCommScopeType	1.3.6.1.4.1.18.3.5.3.5.2.1.5	AutonomousType	read-write	The type of logical entity with which this community is associated. The naming scope for this type of logical entity is accessed by appending a '@' character followed by the ascii name of the naming scope to the community string, wfsnmpCommName, of this entity. If the scope is unspecified {0 0}, then this community is assumed to be affiliated with the main naming scope.
INT wfSnmpCommViewIndex	1.3.6.1.4.1.18.3.5.3.5.2.1.6	INTEGER	read-write	Index of the view that is associated to this community.
wfSnmpMgrTable	1.3.6.1.4.1.18.3.5.3.5.3		not-accessible	A table containing managers and their respective communities
wfSnmpMgrEntry	1.3.6.1.4.1.18.3.5.3.5.3.1		not-accessible	Information about a manager of a community
INT wfSnmpMgrDelete	1.3.6.1.4.1.18.3.5.3.5.3.1.1	INTEGER	read-write	A flag to indicate manager instance deletion
INT wfSnmpMgrCommIndex	1.3.6.1.4.1.18.3.5.3.5.3.1.2	INTEGER	read-only	Associates this manager with a community in the community table
IP wfSnmpMgrAddress	1.3.6.1.4.1.18.3.5.3.5.3.1.3	IpAddress	read-only	IP Address of this manager
STR wfSnmpMgrName	1.3.6.1.4.1.18.3.5.3.5.3.1.4	DisplayString	read-write	A name for this manager
INT wfSnmpMgrTrapPort	1.3.6.1.4.1.18.3.5.3.5.3.1.5	INTEGER	read-write	The UDP Port on which this manager is listening for traps
INT wfSnmpMgrTraps	1.3.6.1.4.1.18.3.5.3.5.3.1.6	INTEGER	read-write	Allowable trap types to be sent to Manager
INT wfSnmpMgrEncrSeed1	1.3.6.1.4.1.18.3.5.3.5.3.1.7	INTEGER	read-only	The encrypted value of the seed counter for application 1 of this manager
INT wfSnmpMgrEncrSeed2	1.3.6.1.4.1.18.3.5.3.5.3.1.8	INTEGER	read-only	The encrypted value of the seed counter for application 2 of this manager
INT wfSnmpMgrEncrSeed3	1.3.6.1.4.1.18.3.5.3.5.3.1.9	INTEGER	read-only	The encrypted value of the seed counter for application 3 of this manager
INT wfSnmpMgrEncrSeed4	1.3.6.1.4.1.18.3.5.3.5.3.1.10	INTEGER	read-only	The encrypted value of the seed counter for application 4 of this manager
INT wfSnmpMgrEncrSeed5	1.3.6.1.4.1.18.3.5.3.5.3.1.11	INTEGER	read-only	The encrypted value of the seed counter for application 5 of this manager
INT wfSnmpMgrCircuitlessTrap	1.3.6.1.4.1.18.3.5.3.5.3.1.12	INTEGER	read-write	If enabled use the circuitless interface IP address as SNMP Trap source. If disabled (default), use the outgoing interface IP address as SNMP Trap source address.
wfSnmpTrapEntityTable	1.3.6.1.4.1.18.3.5.3.5.5		not-accessible	A table of Entity Trap switches ; indexed by entity number and slot
wfSnmpTrapEntityEntry	1.3.6.1.4.1.18.3.5.3.5.5.1		not-accessible	An Entity Trap Switch Entry
INT wfSnmpTrapEntityDelete	1.3.6.1.4.1.18.3.5.3.5.5.1.1	INTEGER	read-write	A flag to indicate entity instance deletion
INT wfSnmpTrapEntityDisable	1.3.6.1.4.1.18.3.5.3.5.5.1.2	INTEGER	read-write	Enable/Disable an entity's traps.
INT wfSnmpTrapEntityNumber	1.3.6.1.4.1.18.3.5.3.5.5.1.3	INTEGER	read-only	Entity number
INT wfSnmpTrapEntitySlot	1.3.6.1.4.1.18.3.5.3.5.5.1.4	INTEGER	read-only	Slot number
STR wfSnmpTrapEntityName	1.3.6.1.4.1.18.3.5.3.5.5.1.5	DisplayString	read-only	Entity Name
INT wfSnmpTrapEntityFault	1.3.6.1.4.1.18.3.5.3.5.5.1.6	INTEGER	read-write	This attribute controls the entity's fault messages. A trap will be generated when this is turned ON.
INT wfSnmpTrapEntityWarn	1.3.6.1.4.1.18.3.5.3.5.5.1.7	INTEGER	read-write	This attribute controls the entity's warning messages. A trap will be generated when this is turned ON.
INT wfSnmpTrapEntityInfo	1.3.6.1.4.1.18.3.5.3.5.5.1.8	INTEGER	read-write	This attribute controls the entity's info messages. A trap will be generated when this is turned ON.
INT wfSnmpTrapEntityTrace	1.3.6.1.4.1.18.3.5.3.5.5.1.9	INTEGER	read-write	This attribute controls the entity's info messages. A trap will be generated when this is turned ON.
INT wfSnmpTrapEntityDebug	1.3.6.1.4.1.18.3.5.3.5.5.1.10	INTEGER	read-write	This attribute controls the entity's debug messages. A trap will be generated when this is turned ON.
wfSnmpTrapEventTable	1.3.6.1.4.1.18.3.5.3.5.6		not-accessible	A table of Event Trap switches ; indexed by entity and event number
wfSnmpTrapEventEntry	1.3.6.1.4.1.18.3.5.3.5.6.1		not-accessible	An Event Trap Switch Entry
INT wfSnmpTrapEventDelete	1.3.6.1.4.1.18.3.5.3.5.6.1.1	INTEGER	read-write	Create/Delete a trap event switch.
INT wfSnmpTrapEventDisable	1.3.6.1.4.1.18.3.5.3.5.6.1.2	INTEGER	read-write	Enable/Disable trap.
INT wfSnmpTrapEventEntity	1.3.6.1.4.1.18.3.5.3.5.6.1.3	INTEGER	read-only	Entity number
INT wfSnmpTrapEventNumber	1.3.6.1.4.1.18.3.5.3.5.6.1.4	INTEGER	read-only	Event number
STR wfSnmpTrapEventName	1.3.6.1.4.1.18.3.5.3.5.6.1.5	DisplayString	read-only	Entity name of event
wfSnmpViewTable	1.3.6.1.4.1.18.3.5.3.5.7		not-accessible	Locally held information about the MIB views known to this snmp agent.
wfSnmpViewEntry	1.3.6.1.4.1.18.3.5.3.5.7.1		not-accessible	Information on a particular family of view subtrees included in or excluded from the view of an external management entity
INT wfSnmpViewDelete	1.3.6.1.4.1.18.3.5.3.5.7.1.1	INTEGER	read-write	Create/Delete parameter for the view.
INT wfSnmpViewIndex	1.3.6.1.4.1.18.3.5.3.5.7.1.2	INTEGER	read-only	A unique value for each MIB view. The value for each MIB view must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT wfSnmpViewSubtree	1.3.6.1.4.1.18.3.5.3.5.7.1.3	INTEGER	read-only	A sequencial numeric value that makes each snmp view entry and its subtree view unique.
STR wfSnmpViewName	1.3.6.1.4.1.18.3.5.3.5.7.1.4	DisplayString	read-write	Ascii name of the view
STR wfSnmpViewTree	1.3.6.1.4.1.18.3.5.3.5.7.1.5	DisplayString	read-write	The ascii representation of the view tree. The object portion of the view tree may be represented by its character name or its numerical representation. The attribute and instance portions of the tree must be indentified by their numerical representation.
INT wfSnmpViewType	1.3.6.1.4.1.18.3.5.3.5.7.1.6	INTEGER	read-write	The status of a particular family of view subtrees. The value `included(1)' indicates that the corresponding instances of the configured mib subtree define a family of view subtrees included in the MIB view. The value `excluded(2)' indicates that the corresponding instances of the configured mib subtree and wfSnmpViewMask define a family of view subtrees excluded from the MIB view.

RFC description

Extends SNMP agent functionality with authentication and set locking on Wellfleet routers.

Start monitoring Wellfleet/Bay Networks multiprotocol router (SNMP-agent trap-generation config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-SNMPEXT-MIB

What Is Wellfleet-SNMPEXT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description