Wellfleet-WFMPC-MIB

All MIBs › Wellfleet-WFMPC-MIB

Category: Wellfleet BayNetworks System Management

Description: Manages Wellfleet multiprotocol controller module parameters and per-protocol traffic statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-WFMPC-MIB?

The Wellfleet-WFMPC-MIB is a Wellfleet Communications proprietary MIB for the Multiprotocol Controller (MPC) module on Wellfleet routers, a hardware interface card capable of handling multiple WAN or LAN protocols simultaneously. It exposes module-specific configuration objects and per-protocol traffic statistics counters tracking how much traffic each supported protocol is forwarding through the controller. Its monitoring focus combines hardware and software status: it confirms the physical controller module is operational and lets an operator see which protocols on that card are actively passing traffic versus idle or erroring, useful for capacity planning and fault isolation on shared hardware. It works in conjunction with protocol-specific Wellfleet MIBs (such as X.25, GRE, or Frame Relay MIBs) that describe the logical circuits running over this physical controller. It was deployed on Wellfleet/Bay Networks chassis routers carrying mixed-protocol WAN traffic on a single controller card. Engineers can download the Wellfleet-WFMPC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-WFMPC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet router with multiprotocol controller card
Bay Networks/Nortel chassis router

Monitoring Examples

An operator polls the WFMPC module's hardware status to confirm the controller card is running normally, then reviews the per-protocol traffic counters to see the split of, say, Frame Relay versus X.25 traffic on the same card. A protocol whose counters flatline while the card's overall status stays 'up' suggests a configuration or software fault specific to that protocol rather than a hardware failure.

What Can Be Monitored

controller module operational status
per-protocol traffic counters
module hardware configuration
protocol-specific error counts

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From Wellfleet-COMMON-MIB

wfmpcObjects

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfmpcEntryTable	1.3.6.1.4.1.18.3.5.9.14.1		not-accessible	MPC base entry table.
wfmpcEntry	1.3.6.1.4.1.18.3.5.9.14.1.1		not-accessible	An MPC base entry description
INT wfmpcDelete	1.3.6.1.4.1.18.3.5.9.14.1.1.1	INTEGER	read-write	Indication to create or delete an MPC base Entry from the MIB
INT wfmpcDisable	1.3.6.1.4.1.18.3.5.9.14.1.1.2	INTEGER	read-write	Enables or Disables MPC Subsystem.
INT wfmpcSlot	1.3.6.1.4.1.18.3.5.9.14.1.1.3	INTEGER	read-only	The Slot number of the slot on which this MPC is instantiated.
INT wfmpcCct	1.3.6.1.4.1.18.3.5.9.14.1.1.4	INTEGER	read-write	This corresponds to the circuit number associated with the ATM Driver
INT wfmpcMsgNum	1.3.6.1.4.1.18.3.5.9.14.1.1.5	INTEGER	read-write	Send the gived message to DestId.
INT wfmpcMsgSendEnable	1.3.6.1.4.1.18.3.5.9.14.1.1.6	INTEGER	read-write	Send the MPOA message to MPS if enabled.
OCT wfmpcMPSAtmAddr	1.3.6.1.4.1.18.3.5.9.14.1.1.7	OCTET STRING	read-write	The remote MPS's ATM Address to which we have to send MPOA Resolution Request.
INT wfmpcSetupVCtoMPS	1.3.6.1.4.1.18.3.5.9.14.1.1.8	INTEGER	read-write	(Re)Establish VC to MPS if SetupVC enabled.
OCT wfmpcMPCAtmAddr	1.3.6.1.4.1.18.3.5.9.14.1.1.9	OCTET STRING	read-write	This MPC (emulator)'s Data ATM Address which is sent back in Cache Imposition Reply.
INT wfmpcCIPNackFlag	1.3.6.1.4.1.18.3.5.9.14.1.1.10	INTEGER	read-write	Flag which indicates CIP Nack or CIP Ack.
wfmpcStatisticsTable	1.3.6.1.4.1.18.3.5.9.14.2		not-accessible	This table represents the statistical information for the MPCs, which this agent manages.
wfmpcStatisticsEntry	1.3.6.1.4.1.18.3.5.9.14.2.1		not-accessible	Each row in this table contains statistics for one MPOA server.
INT wfmpcStatIndex	1.3.6.1.4.1.18.3.5.9.14.2.1.1	INTEGER	read-only	This is the mpc index
CTR wfmpcStatRxMpoaResolveRequests	1.3.6.1.4.1.18.3.5.9.14.2.1.2	Counter	read-only	The number of MPOA Resolve Requests received by this MPC which are translated to NHRP resolve requests. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of wfmpcDiscontinuityTime.
CTR wfmpcStatTxMpoaResolveReplyAcks	1.3.6.1.4.1.18.3.5.9.14.2.1.3	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPC which contain the MPOA CIE Code of 0x00 - Success. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaResolveReplyInsufECResources	1.3.6.1.4.1.18.3.5.9.14.2.1.4	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPC which contain the MPOA CIE Code of 0x81 - Insufficient resources to accept egress cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaResolveReplyInsufSCResources	1.3.6.1.4.1.18.3.5.9.14.2.1.5	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPC which contain the MPOA CIE Code of 0x82 - Insufficent resources to accept shortcut. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaResolveReplyInsufEitherResources	1.3.6.1.4.1.18.3.5.9.14.2.1.6	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPC which contain the MPOA CIE CODE of 0x83 - Insufficient resources to accept either shortcut or egress cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaResolveReplyUnsupportedInetProt	1.3.6.1.4.1.18.3.5.9.14.2.1.7	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPC which contain the MPOA CIE CODE of 0x84 - Unsupported Internetwork Layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaResolveReplyUnsupportedMacEncaps	1.3.6.1.4.1.18.3.5.9.14.2.1.8	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPC which contain the MPOA CIE CODE of 0x85 - Unsupported MAC layer encapsulation. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaResolveReplyUnspecifiedOther	1.3.6.1.4.1.18.3.5.9.14.2.1.9	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPC which contain the MPOA CIE CODE of 0x88 - Unspecified/Other. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaResolveReplyOtherOther	1.3.6.1.4.1.18.3.5.9.14.2.1.10	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPC which are not counted above. NOTE - this would include NHRP errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatGiveupTimeExpireds	1.3.6.1.4.1.18.3.5.9.14.2.1.11	Counter	read-only	The number of times the MPC Give up Time (MPC-p6) has expired while waiting for a reply from a re-originated MPOA resolution request, i.e. a reply for a translated NHRP resolution request. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaImpRequests	1.3.6.1.4.1.18.3.5.9.14.2.1.12	Counter	read-only	The number of MPOA Cache Imposition Requests transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaImpReplyAcks	1.3.6.1.4.1.18.3.5.9.14.2.1.13	Counter	read-only	The number of successful MPOA Cache Imposition Replies received by this MPC which contain an MPOA CIE Code of 0x00, Success. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaImpReplyInsufECResources	1.3.6.1.4.1.18.3.5.9.14.2.1.14	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPC which contain the MPOA CIE Code of 0x81, Insufficient resources to accept egress cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaImpReplyInsufSCResources	1.3.6.1.4.1.18.3.5.9.14.2.1.15	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPC which contain the MPOA CIE Code of 0x82 - Insufficient resources to accept shortcut. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaImpReplyInsufEitherResources	1.3.6.1.4.1.18.3.5.9.14.2.1.16	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPC which contain the MPOA CIE Code of 0x83 - Insufficient resources to accept either shortcut or egress cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaImpReplyUnsupportedInetProt	1.3.6.1.4.1.18.3.5.9.14.2.1.17	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPC which contain the MPOA CIE Code of 0x84 - Unsupported Internetwork Layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaImpReplyUnsupportedMacEncaps	1.3.6.1.4.1.18.3.5.9.14.2.1.18	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPC which contain the MPOA CIE Code of 0x85 - Unsupported MAC layer encapsulation. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaImpReplyUnspecifiedOther	1.3.6.1.4.1.18.3.5.9.14.2.1.19	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPC which contain the MPOA CIE Code of 0x88 - Unspecified/Other. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaImpReplyOtherOther	1.3.6.1.4.1.18.3.5.9.14.2.1.20	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPC which are not counted previously. NOTE - this would include NHRP errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatRxMpoaEgressCachePurgeRequests	1.3.6.1.4.1.18.3.5.9.14.2.1.21	Counter	read-only	The number of MPOA Egress Cache Purges Requests received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaEgressCachePurgeReplies	1.3.6.1.4.1.18.3.5.9.14.2.1.22	Counter	read-only	The number of MPOA Egress Cache Purge Replies transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
CTR wfmpcStatTxMpoaTriggers	1.3.6.1.4.1.18.3.5.9.14.2.1.23	Counter	read-only	The number of MPOA Trigger messages transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime.
INT wfmpcStatSlot	1.3.6.1.4.1.18.3.5.9.14.2.1.24	INTEGER	read-only	The Slot number of the slot on which this MPC is instantiated.

RFC description

MPOA (Multiprotocol Over ATM) Client base configuration and status management.

Start monitoring Wellfleet/Bay Networks/Nortel chassis routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-WFMPC-MIB

What Is Wellfleet-WFMPC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description