Wellfleet-PING-MIB

All MIBs › Wellfleet-PING-MIB

Category: Wellfleet BayNetworks System Management

Description: Manages Wellfleet ICMP ping test operations, target configuration, and round-trip time statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-PING-MIB?

This Wellfleet (Bay Networks) MIB manages ICMP ping test operations on Wellfleet routers, allowing configuration of ping targets and reporting round-trip time and reachability statistics. It exposes ping test configuration objects (target address, test parameters) alongside result objects for response time and packet loss, functioning as a built-in network reachability diagnostic tool on the router. For monitoring it directly supports detecting network-path health issues — an operator can trigger or poll scheduled ping tests to a remote host and observe rising round-trip time or increasing loss as an early indicator of WAN degradation or a downstream device outage. It is a vendor-proprietary MIB using standard ICMP echo semantics, conceptually similar to the later IETF DISMAN-PING-MIB. Typically deployed on legacy Wellfleet/Bay Networks routers for router-initiated remote connectivity testing in WAN environments. Engineers can download the Wellfleet-PING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-PING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks routers

Monitoring Examples

No sample_objects were extracted for this module, so exact table names cannot be cited, but based on the description an administrator would configure a ping test object with a target IP address and polling interval, then poll the resulting round-trip-time and packet-loss objects to detect a remote site becoming unreachable or experiencing high latency across a WAN link.

What Can Be Monitored

ping target configuration
round-trip time to remote host
packet loss/reachability status
ping test scheduling parameters

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Gauge
IpAddress

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfPingGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfPingTable	1.3.6.1.4.1.18.3.3.2.13.1		not-accessible	Ping table
wfPingEntry	1.3.6.1.4.1.18.3.3.2.13.1.1		not-accessible	A list of control entries used to initiate and manage network layer echo request sequences
INT wfPingDelete	1.3.6.1.4.1.18.3.3.2.13.1.1.1	INTEGER	read-write	When set, will cause this row in the table to be deleted
INT wfPingIndex	1.3.6.1.4.1.18.3.3.2.13.1.1.2	INTEGER	read-only	Index into the Ping Table
INT wfPingType	1.3.6.1.4.1.18.3.3.2.13.1.1.3	INTEGER	read-only	Type of Ping Protocol
OCT wfPingAddress	1.3.6.1.4.1.18.3.3.2.13.1.1.4	OCTET STRING	read-write	Address of the object to echo
INT wfPingSize	1.3.6.1.4.1.18.3.3.2.13.1.1.5	INTEGER	read-write	Size of the echo request packet in bytes
INT wfPingTimeOut	1.3.6.1.4.1.18.3.3.2.13.1.1.6	INTEGER	read-write	Amount of time in seconds before deciding success
INT wfPingRetry	1.3.6.1.4.1.18.3.3.2.13.1.1.7	INTEGER	read-write	The number of times to retry
INT wfPingTraceRoute	1.3.6.1.4.1.18.3.3.2.13.1.1.8	INTEGER	read-write	Selecting PING_TRACE (1) will cause a traceroute to be performed and the result placed in wfPingTraceTable
INT wfPingDelay	1.3.6.1.4.1.18.3.3.2.13.1.1.9	INTEGER	read-write	Number of milliseconds to wait between sending echo packets
INT wfPingRemaining	1.3.6.1.4.1.18.3.3.2.13.1.1.10	INTEGER	read-only	The number of ICMP echoes left to send in this sequence. This will be decremented for each time we need to retry and increment wfPingRetry. Whenever a sequence is started, the wfPingReceived and wfPingDropped will be reset to zero.
INT wfPingTimer	1.3.6.1.4.1.18.3.3.2.13.1.1.11	INTEGER	read-write	Time in minutes for the request to begin again, zero means do it once
INT wfPingSourceRoute	1.3.6.1.4.1.18.3.3.2.13.1.1.12	INTEGER	read-write	Option that can be set to use loose or strict source routing. IF the value is something other than PING_NOSOURCEROUTE, the corresponding rows in wfPingSourceRouteTable will be used
OCT wfPingSourceAddress	1.3.6.1.4.1.18.3.3.2.13.1.1.13	OCTET STRING	read-write	Address that specifies the source of the Ping Request
INT wfPingTypeOfService	1.3.6.1.4.1.18.3.3.2.13.1.1.14	INTEGER	read-write	Tells how the ICMP packet should be handled. According to RFC 1349, Normal service is preferred (wfPingTypeOfService = 1)
INT wfPingNumHistBucketsRequested	1.3.6.1.4.1.18.3.3.2.13.1.1.15	INTEGER	read-write	Number of history buckets that the user asked for which will only be granted if the timer mechanism is being used. Otherwise, only 1 bucket will be granted for the single ping
INT wfPingNumHistBucketsGranted	1.3.6.1.4.1.18.3.3.2.13.1.1.16	INTEGER	read-only	The number of history buckets that the user was granted. We don't grant more then 60 which will allow them to do a ping a minute
STR wfPingSiteName	1.3.6.1.4.1.18.3.3.2.13.1.1.17	DisplayString	read-write	Character string to store the name of the Site. This is not used for domain name resolution ! It is purely for cosmetic purposes for customer generated reports
INT wfPingStatus	1.3.6.1.4.1.18.3.3.2.13.1.1.18	INTEGER	read-only	Status of the ping request
INT wfPingAction	1.3.6.1.4.1.18.3.3.2.13.1.1.19	INTEGER	read-write	Begin processing ping when set to GO
INT wfPingLastMinRoundTripTime	1.3.6.1.4.1.18.3.3.2.13.1.1.20	INTEGER	read-only	The last minimum round trip time.
INT wfPingLastMaxRoundTripTime	1.3.6.1.4.1.18.3.3.2.13.1.1.21	INTEGER	read-only	The last maximum round trip time.
INT wfPingLastTotalRoundTripTime	1.3.6.1.4.1.18.3.3.2.13.1.1.22	INTEGER	read-only	The last total round trip time in milliseconds.
IP wfPingIPAddress	1.3.6.1.4.1.18.3.3.2.13.1.1.23	IpAddress	read-only	stations who can't interpret octet string formats.
INT wfPingSuccessStatus	1.3.6.1.4.1.18.3.3.2.13.1.1.24	INTEGER	read-only	interpreting the detailed status returned by wfPingStatus.
INT wfPingMaxHopCount	1.3.6.1.4.1.18.3.3.2.13.1.1.25	INTEGER	read-write	Number of maximum hop count when trace route is enabled. The default maximum hop count is 30.
wfPingTraceTable	1.3.6.1.4.1.18.3.3.2.13.2		not-accessible	Table that contains trace route information
wfPingTraceEntry	1.3.6.1.4.1.18.3.3.2.13.2.1		not-accessible	A conceptual row containing information about a network hop associated with a particular echo request.
INT wfPingTraceType	1.3.6.1.4.1.18.3.3.2.13.2.1.1	INTEGER	read-only	Type of Ping protocol
INT wfPingEntryIndex	1.3.6.1.4.1.18.3.3.2.13.2.1.2	INTEGER	read-only	This is the corresponding index into the Ping Table
INT wfPingTraceIndex	1.3.6.1.4.1.18.3.3.2.13.2.1.3	INTEGER	read-only	A unique integer describing the order in which a particular hop was encountered.
OCT wfPingTraceAddress	1.3.6.1.4.1.18.3.3.2.13.2.1.4	OCTET STRING	read-only	Address of the route we passed through
wfPingSourceTable	1.3.6.1.4.1.18.3.3.2.13.3		not-accessible	Table that contains source route information
wfPingSourceEntry	1.3.6.1.4.1.18.3.3.2.13.3.1		not-accessible	A row in the Ping SourceTable
INT wfPingSourceDelete	1.3.6.1.4.1.18.3.3.2.13.3.1.1	INTEGER	read-write	When set, will cause this row in the table to be deleted.
INT wfPingSourceType	1.3.6.1.4.1.18.3.3.2.13.3.1.2	INTEGER	read-only	Type of Ping Protocol
INT wfPingSourceEntryIndex	1.3.6.1.4.1.18.3.3.2.13.3.1.3	INTEGER	read-only	This is the corresponding index into the Ping Table
INT wfPingSourceIndex	1.3.6.1.4.1.18.3.3.2.13.3.1.4	INTEGER	read-only	A unique index for this source route
OCT wfPingSourceRouteAddress	1.3.6.1.4.1.18.3.3.2.13.3.1.5	OCTET STRING	read-write	Address of the route we are to pass through
wfPingHistoryTable	1.3.6.1.4.1.18.3.3.2.13.4		not-accessible	Table that contains ping history information
wfPingHistoryEntry	1.3.6.1.4.1.18.3.3.2.13.4.1		not-accessible	A row in the Ping HistoryTable
INT wfPingHistoryType	1.3.6.1.4.1.18.3.3.2.13.4.1.1	INTEGER	read-only	Type of Ping protocol
INT wfPingHistoryEntryIndex	1.3.6.1.4.1.18.3.3.2.13.4.1.2	INTEGER	read-only	This is the corresponding index in the ping table
INT wfPingHistoryIndex	1.3.6.1.4.1.18.3.3.2.13.4.1.3	INTEGER	read-only	This is the unique history table index
GAU wfPingReceived	1.3.6.1.4.1.18.3.3.2.13.4.1.4	Gauge	read-only	The total number of ICMP echo packets received in this sequence. A sequence is defined from the time the ping request began to the time it was either successful or an error occurred. This field will be reset to zero at the start of every new sequence.
GAU wfPingDropped	1.3.6.1.4.1.18.3.3.2.13.4.1.5	Gauge	read-only	The number of ICMP packets dropped since this ping sequence started. It will be reset to zero at the start of every new ping sequence
INT wfPingRoundTripTime	1.3.6.1.4.1.18.3.3.2.13.4.1.6	INTEGER	read-only	The round trip time of the last ICMP packet in milliseconds
INT wfPingTotalRoundTripTime	1.3.6.1.4.1.18.3.3.2.13.4.1.7	INTEGER	read-only	The sum of the total round trip times of successful pings received in this sequence
INT wfPingMinRoundTripTime	1.3.6.1.4.1.18.3.3.2.13.4.1.8	INTEGER	read-only	The minimum round trip time in this sequence
INT wfPingMaxRoundTripTime	1.3.6.1.4.1.18.3.3.2.13.4.1.9	INTEGER	read-only	The maximum round trip time in this sequence
OCT wfPingBegan	1.3.6.1.4.1.18.3.3.2.13.4.1.10	OCTET STRING	read-only	The date and time this ping request was last executed

RFC description

Manages network layer echo requests (ping) operations and round-trip time measurements.

Start monitoring Wellfleet/Bay Networks routers (on-demand ping RTT/loss-result status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-PING-MIB

What Is Wellfleet-PING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description