Wellfleet-COPSC-MIB

All MIBs › Wellfleet-COPSC-MIB

Category: Wellfleet BayNetworks System Management

Description: Monitors Wellfleet COPS-C (Common Open Policy Service Client) policy enforcement statistics and server connections.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-COPSC-MIB?

Wellfleet-COPSC-MIB is a Wellfleet Communications (later merged into Bay Networks/Nortel) MIB for COPS-C (Common Open Policy Service, client/configuration variant), a protocol used for centralized policy-based network configuration and QoS policy distribution from a policy server to network devices. No module description or sample object names were provided in the source data, so its exact table/object structure cannot be confirmed, but per its short description it relates to COPS-C policy enforcement statistics and connection state to policy servers. Its likely monitoring value would be visibility into whether a device is successfully connected to its policy decision point and enforcing policy correctly, which matters for troubleshooting QoS or admission-control policies, though this cannot be confirmed against concrete object names here. It would depend on standard COPS protocol conventions and likely on Wellfleet/Bay Networks' broader router MIB family. It would have been deployed on legacy Wellfleet/Bay Networks routers in networks using centralized COPS-based policy management, a technology largely superseded by modern QoS/SDN approaches. Engineers can download the Wellfleet-COPSC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-COPSC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks router (legacy, COPS-C policy client)

Monitoring Examples

No sample object names or module description text were provided for this MIB, so a concrete monitoring scenario referencing real object names cannot be honestly constructed. Based on the short description alone, one would expect objects reporting COPS-C server connection state and policy enforcement counters, but these cannot be confirmed without source data.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Gauge
IpAddress

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfCopsCGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfCopsCBase	1.3.6.1.4.1.18.3.5.25.1.1
INT wfCopsCDelete	1.3.6.1.4.1.18.3.5.25.1.1.1	INTEGER	read-write	Create/Delete parameter
INT wfCopsCDisable	1.3.6.1.4.1.18.3.5.25.1.1.2	INTEGER	read-write	Enable/Disable parameter
INT wfCopsCState	1.3.6.1.4.1.18.3.5.25.1.1.3	INTEGER	read-only	State parameter
GAU wfCopsCCurrentSlotMask	1.3.6.1.4.1.18.3.5.25.1.1.4	Gauge	read-only	Slot mask indicating which slots COPS Client is currently up and running. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN.
INT wfCopsCSoloSlot	1.3.6.1.4.1.18.3.5.25.1.1.5	INTEGER	read-only	The current soloist slot.
GAU wfCopsCSoloSlotMask	1.3.6.1.4.1.18.3.5.25.1.1.6	Gauge	read-write	Slot mask for which slots soloist is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN.
INT wfCopsCDebugLogFilter	1.3.6.1.4.1.18.3.5.25.1.1.7	INTEGER	read-write	Turn logging ON or OFF for COPS Client debugging messages. The bit position is used to represent a COPS Client module: CopsC_LOG_COPS_PROCESSING 0x0001 - COPS processing.
IP wfCopsCIPAddr	1.3.6.1.4.1.18.3.5.25.1.1.8	IpAddress	read-write	Client's IP Address.
STR wfCopsCID	1.3.6.1.4.1.18.3.5.25.1.1.9	DisplayString	read-write	COPS Client's ID.
wfCopsSvrTable	1.3.6.1.4.1.18.3.5.25.1.2		not-accessible	This tabulates the COPS Servers to contact.
wfCopsSvrEntry	1.3.6.1.4.1.18.3.5.25.1.2.1		not-accessible	Entry summary.
INT wfCopsSvrDelete	1.3.6.1.4.1.18.3.5.25.1.2.1.1	INTEGER	read-write	Create/Delete parameter
INT wfCopsSvrDisable	1.3.6.1.4.1.18.3.5.25.1.2.1.2	INTEGER	read-write	Enable/Disable parameter
IP wfCopsSvrIPAddr	1.3.6.1.4.1.18.3.5.25.1.2.1.3	IpAddress	read-only	Server's IP Address.
INT wfCopsSvrPriority	1.3.6.1.4.1.18.3.5.25.1.2.1.4	INTEGER	read-write	Priority for being the active server. Higher value wins. Server IP Address will be used as tie-breaker.
INT wfCopsSvrConnState	1.3.6.1.4.1.18.3.5.25.1.2.1.5	INTEGER	read-only	State of server connection.
INT wfCopsSvrConnTimer	1.3.6.1.4.1.18.3.5.25.1.2.1.6	INTEGER	read-write	Time period between connection retries, in seconds.
INT wfCopsSvrConnRetryCount	1.3.6.1.4.1.18.3.5.25.1.2.1.7	INTEGER	read-write	Connection attempt retry before giving up on server.
INT wfCopsSvrKeepAliveTimer	1.3.6.1.4.1.18.3.5.25.1.2.1.8	INTEGER	read-write	Time period between sending of Keep Alives, in seconds.
INT wfCopsSvrReportTimer	1.3.6.1.4.1.18.3.5.25.1.2.1.9	INTEGER	read-write	Time period between sending of Reports, in seconds.
INT wfCopsSvrTCPKeepAliveInterval	1.3.6.1.4.1.18.3.5.25.1.2.1.10	INTEGER	read-write	KeepAlive packets will be sent into inactive, established TCP connections after this time interval (in seconds). A time of zero disables this keepalive feature.
INT wfCopsSvrTCPKeepAliveRetryTimeOut	1.3.6.1.4.1.18.3.5.25.1.2.1.11	INTEGER	read-write	TCP Keep Alive retransmit timeout period, in seconds. This is the interval at which unacknowledged Keep Alive messages will be retransmitted. If the Interval Timer is set to zero, this timer is ignored. If the Interval Timer is non-zero and this timer IS zero, no Keep Alives are sent and the session is terminated upon expiration of the Interval Timer.
INT wfCopsSvrTCPKeepAliveMaxRetryCount	1.3.6.1.4.1.18.3.5.25.1.2.1.12	INTEGER	read-write	Number of unacknowledged Keep Alive messages retransmitted before the TCP session is terminated. If this count is set to zero, only one Keep Alive message will be sent.
INT wfCopsSvrRemotePort	1.3.6.1.4.1.18.3.5.25.1.2.1.13	INTEGER	read-write	Server's Remote TCP Port.

RFC description

Manages COPS (Common Open Policy Service) client configuration and slot status on Wellfleet/Bay Networks routers.

Start monitoring Wellfleet/Bay Networks router, legacy, COPS-C policy client (policy-server connection status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-COPSC-MIB

What Is Wellfleet-COPSC-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description