Wellfleet-NHRP-MIB

All MIBs › Wellfleet-NHRP-MIB

Category: Wellfleet BayNetworks Routing Protocols

Description: Monitors Wellfleet NHRP (Next Hop Resolution Protocol) cache entries, server connections, and resolution statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-NHRP-MIB?

Wellfleet-NHRP-MIB is a Wellfleet/Bay Networks (later Nortel) proprietary MIB implementing management for NHRP (Next Hop Resolution Protocol), used to resolve next-hop addresses for shortcut routing across NBMA (non-broadcast multi-access) networks like Frame Relay or ATM. It exposes NHRP cache/network tables tracking layer 2/3 address mappings, resolution request paths, and client registration/timeout behavior. From a monitoring perspective it supports checking NHRP client operational parameters such as registration interval, hold time, request timeout/retry counts, and whether the client is administratively disabled, functioning as a software/protocol-state health indicator for NBMA shortcut-routing services. It implicitly depends on the base NHRP protocol specification (RFC 2332) whose concepts it mirrors in vendor-specific object naming. It is typically deployed on legacy Wellfleet/Bay Networks routers participating in Frame Relay or ATM NBMA clouds, where Wellfleet-NHRP-MIB SNMP monitoring helps confirm NHRP shortcut path resolution is functioning correctly.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-NHRP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks (Nortel) routers on NBMA (Frame Relay/ATM) networks

Monitoring Examples

An administrator would poll wfNhrpNetTable/wfNhrpNetEntry to inspect resolved next-hop mappings, checking wfNhrpLayer2Type and wfNhrpLayer3Type to confirm address-family consistency across NBMA shortcuts. Reading wfNhrpClientDisable alongside wfNhrpClientRegInterval and wfNhrpClientHoldTime reveals whether the NHRP client is active and how aggressively it refreshes registrations; a client with wfNhrpClientDisable set unexpectedly would explain stalled shortcut-path resolution. wfNhrpNHReqPath and the wfNhrpClientReqTimeout/wfNhrpClientReqRetry counters help diagnose slow or failing next-hop resolution requests across the NBMA cloud.

What Can Be Monitored

NHRP cache/network table entries
layer 2/3 address type mappings
client registration interval
client hold time
request timeout and retry counts
client enabled/disabled state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfNhrpGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfNhrpNetTable	1.3.6.1.4.1.18.3.5.3.23.1		not-accessible	A table containing entries for each combination of a layer 2 network and a layer 3 protocol. Currently, IP over Frame Relay and IP over ATM is supported.
wfNhrpNetEntry	1.3.6.1.4.1.18.3.5.3.23.1.1		not-accessible	Information about a particular NHRP instance.
INT wfNhrpDelete	1.3.6.1.4.1.18.3.5.3.23.1.1.1	INTEGER	read-write	Create/Delete this NHRP instance
INT wfNhrpLayer2Type	1.3.6.1.4.1.18.3.5.3.23.1.1.2	INTEGER	read-only	Type of layer 2 Network.
INT wfNhrpLayer3Type	1.3.6.1.4.1.18.3.5.3.23.1.1.3	INTEGER	read-only	Type of layer 3 protocol.
INT wfNhrpNHReqPath	1.3.6.1.4.1.18.3.5.3.23.1.1.4	INTEGER	read-write	Path NHC will attempt first to look-up destination. In case of routed path, if dest. is not found it will search Default NHS list also.
INT wfNhrpClientDisable	1.3.6.1.4.1.18.3.5.3.23.1.1.5	INTEGER	read-write	Enable/Disable NHRP client functionality.
INT wfNhrpClientRegInterval	1.3.6.1.4.1.18.3.5.3.23.1.1.6	INTEGER	read-write	Client registration period. Every wfNhrpRegInterval seconds, CREG gate will send registration request to refresh/update NH cache. It should always be less than wfNhrpNHCacheHoldTime
INT wfNhrpClientHoldTime	1.3.6.1.4.1.18.3.5.3.23.1.1.7	INTEGER	read-write	Time (seconds) for which client info is valid.
INT wfNhrpClientReqTimeout	1.3.6.1.4.1.18.3.5.3.23.1.1.8	INTEGER	read-write	Client request timeout in seconds
INT wfNhrpClientReqRetry	1.3.6.1.4.1.18.3.5.3.23.1.1.9	INTEGER	read-write	Number of times to retry a given client request before returning an error.
INT wfNhrpClientMaxPendRequests	1.3.6.1.4.1.18.3.5.3.23.1.1.10	INTEGER	read-write	Maximum Number of pending requests for client.
INT wfNhrpServerDisable	1.3.6.1.4.1.18.3.5.3.23.1.1.11	INTEGER	read-write	Enable/Disable NHRP server functionality.
INT wfNhrpServerFwdDisable	1.3.6.1.4.1.18.3.5.3.23.1.1.12	INTEGER	read-write	Enable/Disable NHRP server request forwarding function.
INT wfNhrpServerMaxNhEntries	1.3.6.1.4.1.18.3.5.3.23.1.1.13	INTEGER	read-write	maximum number of next hop entries to keep. If the NH Resolution Reply message has more entries, last ones will be discarded.
INT wfNhrpServerMaxPendRequests	1.3.6.1.4.1.18.3.5.3.23.1.1.14	INTEGER	read-write	Maximum Number of pending requests for servers.
INT wfNhrpServerUseBgp	1.3.6.1.4.1.18.3.5.3.23.1.1.15	INTEGER	read-write	Use BGP to find next hop if destination address is not in cache.
INT wfNhrpServerUseDns	1.3.6.1.4.1.18.3.5.3.23.1.1.16	INTEGER	read-write	Use DNS to translate addresses and find QoS for next hop resolutions.
INT wfNhrpServerDnsProxyPort	1.3.6.1.4.1.18.3.5.3.23.1.1.17	INTEGER	read-write	DNS proxy port for QOS translation queries
INT wfNhrpServerOverrideNbmaAddr	1.3.6.1.4.1.18.3.5.3.23.1.1.18	INTEGER	read-write	Override NBMA addresses in client registration messages.
STR wfNhrpBogusNbmaAddr	1.3.6.1.4.1.18.3.5.3.23.1.1.19	DisplayString	read-write	Value used to determine if NBMA address in client request is valid.
INT wfNhrpNhCacheSize	1.3.6.1.4.1.18.3.5.3.23.1.1.20	INTEGER	read-write	Maximum number of next hop entries to be cached
INT wfNhrpQosCacheSize	1.3.6.1.4.1.18.3.5.3.23.1.1.21	INTEGER	read-write	Maximum number of socketpair to filter/flow spec entries to be cached
INT wfNhrpAddrXlateCacheSize	1.3.6.1.4.1.18.3.5.3.23.1.1.22	INTEGER	read-write	Maximum number of L3-to-L2 address mapping entries to be cached
INT wfNhrpServerLoadBalance	1.3.6.1.4.1.18.3.5.3.23.1.1.23	INTEGER	read-write	Enable/disable round-robin cycling of next hop entries to cause a load-balancing effect.
INT wfNhrpServerNegativeCaching	1.3.6.1.4.1.18.3.5.3.23.1.1.24	INTEGER	read-write	Enable/disable negative caching of DNS records.
INT wfNhrpServerNegativeTTL	1.3.6.1.4.1.18.3.5.3.23.1.1.25	INTEGER	read-write	Time in seconds for negative caching of DNS records.
INT wfNhrpDebugLevel	1.3.6.1.4.1.18.3.5.3.23.1.1.26	INTEGER	read-write	Minimum level of debug messages to log.
INT wfNhrpStatReset	1.3.6.1.4.1.18.3.5.3.23.1.1.27	INTEGER	read-write	Reset all NHRP client and server stats.
INT wfNhrpNhCacheSequence	1.3.6.1.4.1.18.3.5.3.23.1.1.28	INTEGER	read-only	Sequence number for Next Hop Cache updates.
INT wfNhrpNhCacheNumEntries	1.3.6.1.4.1.18.3.5.3.23.1.1.29	INTEGER	read-only	Current number of Next Hop Cache entries.
INT wfNhrpQosCacheNumEntries	1.3.6.1.4.1.18.3.5.3.23.1.1.30	INTEGER	read-only	Current number of entries in QOS Cache.
INT wfNhrpAddrXlateCacheNumEntries	1.3.6.1.4.1.18.3.5.3.23.1.1.31	INTEGER	read-only	Current number of entries in Address Translation Cache.
wfNhrpIfTable	1.3.6.1.4.1.18.3.5.3.23.2		not-accessible	WF_NHRP_INTERFACE_Table - NHRP This tabulates the interfaces within an nhrp protocol group. All interfaces are indexed according to their Circuit Number.
wfNhrpIfEntry	1.3.6.1.4.1.18.3.5.3.23.2.1		not-accessible	Nhrp interface entries.
INT wfNhrpIfDelete	1.3.6.1.4.1.18.3.5.3.23.2.1.1	INTEGER	read-write	Creation and deletion flag for this record. When set, it will cause this entry to be deleted from the MIB.
INT wfNhrpIfDisable	1.3.6.1.4.1.18.3.5.3.23.2.1.2	INTEGER	read-write	Enable/Disable parameter. A disabled interface will never be selected as the active interface for a circuit.
INT wfNhrpIfVCType	1.3.6.1.4.1.18.3.5.3.23.2.1.3	INTEGER	read-write	Type of VC, NHC will setup, if no encaps gate exist for the given VCid, when needed.
INT wfNhrpIfCct	1.3.6.1.4.1.18.3.5.3.23.2.1.4	INTEGER	read-only	The number of the circuit to which the interface belongs.
INT wfNhrpIfLayer2Type	1.3.6.1.4.1.18.3.5.3.23.2.1.5	INTEGER	read-only	Type of layer 2 Network for this instance.
INT wfNhrpIfLayer3Type	1.3.6.1.4.1.18.3.5.3.23.2.1.6	INTEGER	read-only	Type of layer 3 Protocol for this instance.
CTR wfNhrpIfPktsXmt	1.3.6.1.4.1.18.3.5.3.23.2.1.7	Counter	read-only	The number of NHRP packets sent on this interface.
wfNhrpDefNhsTable	1.3.6.1.4.1.18.3.5.3.23.3		not-accessible	A list of default NHS's to contact with request messages.
wfNhrpDefNhsEntry	1.3.6.1.4.1.18.3.5.3.23.3.1		not-accessible	Information pertaining to each default NHS which a client may contact.
INT wfNhrpDefNhsDelete	1.3.6.1.4.1.18.3.5.3.23.3.1.1	INTEGER	read-write	Creation and deletion flag for this record. When set, it will cause this entry to be deleted from the MIB.
INT wfNhrpDefNhsDisable	1.3.6.1.4.1.18.3.5.3.23.3.1.2	INTEGER	read-write	Enable/Disable parameter. A disabled NHS will never be selected for sending requests.
INT wfNhrpDefNhsCct	1.3.6.1.4.1.18.3.5.3.23.3.1.3	INTEGER	read-write	The identifier of the circuit on which requests are sent to NHS.
INT wfNhrpDefNhsVcid1	1.3.6.1.4.1.18.3.5.3.23.3.1.4	INTEGER	read-write	The virtual circuit ID on which requests are sent to NHS. Vcid1 = The Dlci number for Frame Relay, the VPI for ATM Range = {0-255}
INT wfNhrpDefNhsVcid2	1.3.6.1.4.1.18.3.5.3.23.3.1.5	INTEGER	read-write	The virtual circuit ID on which requests are sent to NHS. Vcid2 = The VCI for ATM, NULL for Frame Relay. Range = {32-65535}
IP wfNhrpDefNhsProtoAddr	1.3.6.1.4.1.18.3.5.3.23.3.1.6	IpAddress	read-write	Layer 3 protocol address for this default NHS. Currently only IP addresses are supported.
IP wfNhrpDefNhsServingNetworkAddr	1.3.6.1.4.1.18.3.5.3.23.3.1.7	IpAddress	read-write	Layer 3 network address of hosts served by this default NHS. Currently only IP type of network addresses are supported.
IP wfNhrpDefNhsServingNetworkMask	1.3.6.1.4.1.18.3.5.3.23.3.1.8	IpAddress	read-write	Layer 3 network address mask for range of hosts served by this default NHS. Currently only IP net mask is supported.
OCT wfNhrpDefNhsNbmaAddr	1.3.6.1.4.1.18.3.5.3.23.3.1.9	OCTET STRING	read-write	Layer 2 NBMA address for this default NHS. This will be valid only when SVCs needs to be created
INT wfNhrpDefNhsStatus	1.3.6.1.4.1.18.3.5.3.23.3.1.10	INTEGER	read-only	Reachability Status of this NHS .
INT wfNhrpDefNhsLayer2Type	1.3.6.1.4.1.18.3.5.3.23.3.1.11	INTEGER	read-only	Type of layer 2 Network associated with this NHS.
INT wfNhrpDefNhsLayer3Type	1.3.6.1.4.1.18.3.5.3.23.3.1.12	INTEGER	read-only	Type of layer 3 Protocol associated with this NHS.
INT wfNhrpDefNhsIndex	1.3.6.1.4.1.18.3.5.3.23.3.1.13	INTEGER	read-only	Index used as priority of the NHS. That is, smallest index is selected first.
wfNhrpNHCacheTable	1.3.6.1.4.1.18.3.5.3.23.4		not-accessible	A list of default NHS's to contact with request messages.
wfNhrpNHCacheEntry	1.3.6.1.4.1.18.3.5.3.23.4.1		not-accessible	NHRP Next Hop Cache Entry.
INT wfNhrpNHCacheSlot	1.3.6.1.4.1.18.3.5.3.23.4.1.1	INTEGER	read-only	The slot number indexes the object
INT wfNhrpNHCacheLayer2Type	1.3.6.1.4.1.18.3.5.3.23.4.1.2	INTEGER	read-only	Type of layer 2 Network associated with this cache entry.
INT wfNhrpNHCacheLayer3Type	1.3.6.1.4.1.18.3.5.3.23.4.1.3	INTEGER	read-only	Type of layer 3 Protocol associated with this cache entry.
IP wfNhrpNHCacheDestAddr	1.3.6.1.4.1.18.3.5.3.23.4.1.4	IpAddress	read-only	protocol address of the destination
INT wfNhrpNHCacheDestAddrPrefixLen	1.3.6.1.4.1.18.3.5.3.23.4.1.5	INTEGER	read-only	destination address prifix length
INT wfNhrpNHCachePrefOrder	1.3.6.1.4.1.18.3.5.3.23.4.1.6	INTEGER	read-only	preference order for this entry
IP wfNhrpNHCacheNhProtAddr	1.3.6.1.4.1.18.3.5.3.23.4.1.7	IpAddress	read-write	protocol address of the next hop
STR wfNhrpNHCacheNhNbmaAddr	1.3.6.1.4.1.18.3.5.3.23.4.1.8	DisplayString	read-write	NBMA address of the next hop
INT wfNhrpNHCacheHoldTime	1.3.6.1.4.1.18.3.5.3.23.4.1.9	INTEGER	read-write	Time (seconds) for which client info is valid.
INT wfNhrpNHCacheFlags	1.3.6.1.4.1.18.3.5.3.23.4.1.10	INTEGER	read-write	entry state flags
INT wfNhrpNHCachePrefValue	1.3.6.1.4.1.18.3.5.3.23.4.1.11	INTEGER	read-write	next hop preference value
INT wfNhrpNHCacheMtu	1.3.6.1.4.1.18.3.5.3.23.4.1.12	INTEGER	read-write	Max transmission unit for next hop
INT wfNhrpNHCacheDelete	1.3.6.1.4.1.18.3.5.3.23.4.1.13	INTEGER	read-write	Create/Delete this NHRP NH Cache Entry
wfNhrpTest	1.3.6.1.4.1.18.3.5.3.23.5
INT wfNhrpTestDelete	1.3.6.1.4.1.18.3.5.3.23.5.1	INTEGER	read-write	Create or Delete the Nhrp Test Base Record
INT wfNhrpTestLayer2Type	1.3.6.1.4.1.18.3.5.3.23.5.2	INTEGER	read-write	Identifies layer 2 protocol for which next hop is desired.
INT wfNhrpTestLayer3Type	1.3.6.1.4.1.18.3.5.3.23.5.3	INTEGER	read-write	Identifies layer 3 protocol for which next hop is desired.
INT wfNhrpTestSlot	1.3.6.1.4.1.18.3.5.3.23.5.4	INTEGER	read-write	Slot number on which test client initiates next hop requests.
INT wfNhrpTestNHRPeriod	1.3.6.1.4.1.18.3.5.3.23.5.5	INTEGER	read-write	Time (msec) between next hop requests.
IP wfNhrpTestNHRDestAddr	1.3.6.1.4.1.18.3.5.3.23.5.6	IpAddress	read-write	Protocol address of destination for which next hop is desired.
INT wfNhrpTestNHRDestPrefix	1.3.6.1.4.1.18.3.5.3.23.5.7	INTEGER	read-write	Prefix length of destination address for which next hop is desired.
INT wfNhrpTestNHRReqOpt	1.3.6.1.4.1.18.3.5.3.23.5.8	INTEGER	read-write	A bit field identifying next hop request options.
STR wfNhrpTestNHRReqQOS	1.3.6.1.4.1.18.3.5.3.23.5.9	DisplayString	read-write	QoS selector value for next hop requests.
INT wfNhrpTestLogDisable	1.3.6.1.4.1.18.3.5.3.23.5.10	INTEGER	read-write	Indicates whether reply data is written to log.
INT wfNhrpTestRegCmd	1.3.6.1.4.1.18.3.5.3.23.5.11	INTEGER	read-write	Type of registration request to send (register or purge).
IP wfNhrpTestRegNhsAddr	1.3.6.1.4.1.18.3.5.3.23.5.12	IpAddress	read-write	Protocol address of NHS to send registration or purge request. If no address is given, the request will be sent to a default NHS.
INT wfNhrpTestRegReqOpt	1.3.6.1.4.1.18.3.5.3.23.5.13	INTEGER	read-write	A bit field identifying register/purge options.
INT wfNhrpTestRegClientHoldTime	1.3.6.1.4.1.18.3.5.3.23.5.14	INTEGER	read-write	A bit field identifying register/purge hold time (seconds).
INT wfNhrpTestRegClientPrefVal	1.3.6.1.4.1.18.3.5.3.23.5.15	INTEGER	read-write	A bit field identifying register/purge preference value.
INT wfNhrpTestRegClientMtu	1.3.6.1.4.1.18.3.5.3.23.5.16	INTEGER	read-write	Max transmit unit size (octets) for this client.
INT wfNhrpTestRegClientPrefix	1.3.6.1.4.1.18.3.5.3.23.5.17	INTEGER	read-write	Prefix length of client protocol address to register or purge.
IP wfNhrpTestRegClientProto	1.3.6.1.4.1.18.3.5.3.23.5.18	IpAddress	read-write	registered client protocol address.
STR wfNhrpTestRegClientNbma	1.3.6.1.4.1.18.3.5.3.23.5.19	DisplayString	read-write	registered client NBMA address. In case of MPS res. request this will be SRC_NBMA_ADDR
INT wfNhrpTestMpsGH	1.3.6.1.4.1.18.3.5.3.23.5.20	INTEGER	read-write	Gate handle of MPS to be registered
INT wfNhrpTestMpsCct	1.3.6.1.4.1.18.3.5.3.23.5.21	INTEGER	read-write	Circuit# of MPS to be registered.
wfNhrpClientStatTable	1.3.6.1.4.1.18.3.5.3.23.6		not-accessible	This table contains statistics collected by NHRP clients.
wfNhrpClientStatEntry	1.3.6.1.4.1.18.3.5.3.23.6.1		not-accessible	Statistics collected by NHRP clients.
INT wfNhrpClientStatL2Type	1.3.6.1.4.1.18.3.5.3.23.6.1.1	INTEGER	read-only	The NHRP client layer 2 type for these statistics.
INT wfNhrpClientStatL3Type	1.3.6.1.4.1.18.3.5.3.23.6.1.2	INTEGER	read-only	The NHRP client layer 3 type for these statistics.
CTR wfNhrpClientStatTxResolveReq	1.3.6.1.4.1.18.3.5.3.23.6.1.3	Counter	read-only	The number of NHRP Resolution Requests transmitted by this client.
CTR wfNhrpClientStatRxResolveReplyAck	1.3.6.1.4.1.18.3.5.3.23.6.1.4	Counter	read-only	The number of positively acknowledged NHRP Resolution Replies received by this client.
CTR wfNhrpClientStatRxResolveReplyNak	1.3.6.1.4.1.18.3.5.3.23.6.1.5	Counter	read-only	The number of NAKed NHRP Resolution Replies received by this client.
CTR wfNhrpClientStatTxRegisterReq	1.3.6.1.4.1.18.3.5.3.23.6.1.6	Counter	read-only	The number of NHRP Registration Requests transmitted by this client.
CTR wfNhrpClientStatRxRegisterReplyAck	1.3.6.1.4.1.18.3.5.3.23.6.1.7	Counter	read-only	The number of positively acknowledged NHRP Registration Replies received by this client.
CTR wfNhrpClientStatRxRegisterReplyNak	1.3.6.1.4.1.18.3.5.3.23.6.1.8	Counter	read-only	The number of NAKed NHRP Registration Replies received by this client.
CTR wfNhrpClientStatTxPurgeReq	1.3.6.1.4.1.18.3.5.3.23.6.1.9	Counter	read-only	The number of NHRP Purge Requests transmitted by this client.
CTR wfNhrpClientStatRxPurgeReplyAck	1.3.6.1.4.1.18.3.5.3.23.6.1.10	Counter	read-only	The number of positive NHRP Purge Replies received by this client.
CTR wfNhrpClientStatRxPurgeReplyNak	1.3.6.1.4.1.18.3.5.3.23.6.1.11	Counter	read-only	The number of NAKed NHRP Purge Replies received by this client.
CTR wfNhrpClientStatUnsolicitPurgeReq	1.3.6.1.4.1.18.3.5.3.23.6.1.12	Counter	read-only	The number of unsolicited purge requests rec'd by this client
CTR wfNhrpClientStatTxError	1.3.6.1.4.1.18.3.5.3.23.6.1.13	Counter	read-only	The number of NHRP Error Indication packets transmitted by this client.
CTR wfNhrpClientStatRxError	1.3.6.1.4.1.18.3.5.3.23.6.1.14	Counter	read-only	The number of NHRP Error Indication packets received by this client.
CTR wfNhrpClientStatLocalError	1.3.6.1.4.1.18.3.5.3.23.6.1.15	Counter	read-only	The number of local errors which occured on this client.
CTR wfNhrpClientStatRetryReq	1.3.6.1.4.1.18.3.5.3.23.6.1.16	Counter	read-only	The number of retries made for client requests by this client.
wfNhrpServerStatTable	1.3.6.1.4.1.18.3.5.3.23.7		not-accessible	Statistics collected by Next Hop Servers.
wfNhrpServerStatEntry	1.3.6.1.4.1.18.3.5.3.23.7.1		not-accessible	Statistics for a particular NHS. The statistics are broken into received (Rx), transmitted (Tx) and forwarded (Fw)...
INT wfNhrpServerStatL2Type	1.3.6.1.4.1.18.3.5.3.23.7.1.1	INTEGER	read-only	The NHRP server layer 2 type for these statistics.
INT wfNhrpServerStatL3Type	1.3.6.1.4.1.18.3.5.3.23.7.1.2	INTEGER	read-only	The NHRP server layer 3 type for these statistics.
CTR wfNhrpServerStatRxResolveReq	1.3.6.1.4.1.18.3.5.3.23.7.1.3	Counter	read-only	The number of NHRP Resolution Requests received by this server.
CTR wfNhrpServerStatTxResolveReplyAck	1.3.6.1.4.1.18.3.5.3.23.7.1.4	Counter	read-only	The number of positively acknowledged NHRP Resolution Replies transmitted by this server.
CTR wfNhrpServerStatTxResolveReplyNak	1.3.6.1.4.1.18.3.5.3.23.7.1.5	Counter	read-only	The number of NAKed NHRP Resolution Replies transmitted by this server.
CTR wfNhrpServerStatRxRegisterReq	1.3.6.1.4.1.18.3.5.3.23.7.1.6	Counter	read-only	The number of NHRP Registration Requests received by this server.
CTR wfNhrpServerStatTxRegisterReplyAck	1.3.6.1.4.1.18.3.5.3.23.7.1.7	Counter	read-only	The number of positively acknowledge NHRP Registration Replies transmitted by this server.
CTR wfNhrpServerStatTxRegisterReplyNak	1.3.6.1.4.1.18.3.5.3.23.7.1.8	Counter	read-only	The number of NAKed NHRP Registration Replies transmitted by this server.
CTR wfNhrpServerStatRxPurgeReq	1.3.6.1.4.1.18.3.5.3.23.7.1.9	Counter	read-only	The number of NHRP Purge Requests received by this server.
CTR wfNhrpServerStatTxPurgeReplyAck	1.3.6.1.4.1.18.3.5.3.23.7.1.10	Counter	read-only	The number of positive NHRP Purge Replies transmitted by this server.
CTR wfNhrpServerStatTxPurgeReplyNak	1.3.6.1.4.1.18.3.5.3.23.7.1.11	Counter	read-only	The number of NAKed NHRP Purge Replies transmitted by this server.
CTR wfNhrpServerStatRxError	1.3.6.1.4.1.18.3.5.3.23.7.1.12	Counter	read-only	The number of NHRP Error Indication packets received by this server with the error code 'Unrecognized Extension'.
CTR wfNhrpServerStatTxError	1.3.6.1.4.1.18.3.5.3.23.7.1.13	Counter	read-only	The number of NHRP Error Indication packets received by this server with the error code 'Subnetwork ID Mismatch'.
CTR wfNhrpServerStatFwdResolveReq	1.3.6.1.4.1.18.3.5.3.23.7.1.14	Counter	read-only	The number of NHRP Resolution Requests forwarded by this server acting as a transit NHS.
CTR wfNhrpServerStatFwdResolveReply	1.3.6.1.4.1.18.3.5.3.23.7.1.15	Counter	read-only	The number of NHRP Resolution Replies forwarded by this server acting as a transit NHS.
CTR wfNhrpServerStatFwdRegisterReq	1.3.6.1.4.1.18.3.5.3.23.7.1.16	Counter	read-only	The number of NHRP Registration Requests forwarded by this server acting as a transit NHS.
CTR wfNhrpServerStatFwdRegisterReply	1.3.6.1.4.1.18.3.5.3.23.7.1.17	Counter	read-only	The number of NHRP Registration Replies forwarded by this server acting as a transit NHS.
CTR wfNhrpServerStatFwdPurgeReq	1.3.6.1.4.1.18.3.5.3.23.7.1.18	Counter	read-only	The number of NHRP Purge Requests forwarded by this server acting as a transit NHS.
CTR wfNhrpServerStatFwdPurgeReply	1.3.6.1.4.1.18.3.5.3.23.7.1.19	Counter	read-only	The number of NHRP Purge Replies forwarded by this server acting as a transit NHS.
CTR wfNhrpServerStatFwdError	1.3.6.1.4.1.18.3.5.3.23.7.1.20	Counter	read-only	The number of NHRP Error Indication packets forwarded by this server acting as a transit NHS.
CTR wfNhrpServerStatDropPkts	1.3.6.1.4.1.18.3.5.3.23.7.1.21	Counter	read-only	The number of packets dropped by this NHS.

RFC description

Vendor-private MIB for monitoring NHRP (Next Hop Resolution Protocol) functionality on Wellfleet networking equipment.

Start monitoring Wellfleet/Bay Networks (Nortel) routers on NBMA (Frame Relay/ATM) networks (NHRP registration/resolution status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-NHRP-MIB

What Is Wellfleet-NHRP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description