All MIBs › Wellfleet-DVMRP-MIB
Category: Wellfleet BayNetworks Routing Protocols
Description: Monitors Wellfleet DVMRP multicast routing table, neighbor relationships, and pruning state.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Wellfleet-DVMRP-MIB?
Wellfleet-DVMRP-MIB is a proprietary MIB from Wellfleet Communications/Bay Networks that monitors the Distance Vector Multicast Routing Protocol (DVMRP) implementation on its routers. It exposes the multicast routing table, DVMRP neighbor adjacency information, and pruning state used to control multicast traffic distribution. It is a routing-protocol/software-status MIB: administrators use it to confirm DVMRP neighbor relationships remain up and to check whether multicast trees are being pruned/grafted correctly, since a stuck or missing prune state can cause unwanted multicast flooding or, conversely, dropped multicast traffic. It parallels the concepts later standardized in the IETF DVMRP-MIB, though implemented under Wellfleet's own OID structure. It was typically deployed on Wellfleet/Bay Networks routers in networks running early IP multicast applications such as video distribution or MBone-style traffic. Engineers can download the Wellfleet-DVMRP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-DVMRP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Wellfleet/Bay Networks router (legacy)
Monitoring Examples
No sample objects were provided, so this is inferred: an administrator would poll the DVMRP neighbor table and multicast routing table to confirm expected neighbor adjacencies are up and that pruning state matches expected traffic patterns. A neighbor relationship that unexpectedly drops, or a multicast group stuck in an unpruned state long after receivers have left, would indicate a DVMRP protocol problem worth investigating.
What Can Be Monitored
- DVMRP neighbor adjacency state
- multicast routing table entries
- prune/graft state
- DVMRP protocol status
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress |
From Wellfleet-COMMON-MIB
| wfDvmrpGroup | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| wfDvmrpBase | 1.3.6.1.4.1.18.3.5.3.12.1 | |||
| INT wfDvmrpBaseCreate | 1.3.6.1.4.1.18.3.5.3.12.1.1 | INTEGER | read-write | This entry will provide the base configuration for the DVMRP multicast support on the router. |
| INT wfDvmrpBaseEnable | 1.3.6.1.4.1.18.3.5.3.12.1.2 | INTEGER | read-write | Enable or disable DVMRP support in router |
| INT wfDvmrpBaseState | 1.3.6.1.4.1.18.3.5.3.12.1.3 | INTEGER | read-only | State of DVMRP base module |
| INT wfDvmrpBaseFullUpdateInterval | 1.3.6.1.4.1.18.3.5.3.12.1.4 | INTEGER | read-write | Full update interval. This value specifies, in seconds, how often routing messages containing complete routing tables are sent. |
| INT wfDvmrpBaseTriggeredUpdateInterval | 1.3.6.1.4.1.18.3.5.3.12.1.5 | INTEGER | read-write | Triggered update interval. This value specifies, in seconds, how often triggered routing messages are sent; this represents the minimum amount of time between these type of messages. Triggered updates are sent between full update; the timers restart when a full update is sent so this value should be less than the full update rate. |
| INT wfDvmrpBaseLeafTimeout | 1.3.6.1.4.1.18.3.5.3.12.1.6 | INTEGER | read-write | Leaf timeout. This value specifies, in seconds, the virtual interface hold down timer. |
| INT wfDvmrpBaseNeighborTimeout | 1.3.6.1.4.1.18.3.5.3.12.1.7 | INTEGER | read-write | Neighbor timeout. This value specifies, in seconds, how long a router neighbor is considered 'up' without confirmation. |
| INT wfDvmrpBaseRouteExpirationTimeout | 1.3.6.1.4.1.18.3.5.3.12.1.8 | INTEGER | read-write | Route Expiration timeout. This value specifies, in seconds, how long a route is considered valid without confirmation; this represents the duration of time that this route will be used. |
| INT wfDvmrpBaseGarbageTimeout | 1.3.6.1.4.1.18.3.5.3.12.1.9 | INTEGER | read-write | Garbage timeout. This value specifies, in seconds, how long a route exists without confirmation; this represents the duration of time that this route will be included in routing updates. This value must be greater than the route expiration timeout. |
| INT wfDvmrpBaseEstimatedRoutes | 1.3.6.1.4.1.18.3.5.3.12.1.10 | INTEGER | read-write | Estimated number of routes, per slot. This is used for pre-allocating routing tables. Note that routes are kept on a per-source network basis, independent of multicast group. This number must include a route for every local network that has a CCT configured for multicasting. |
| INT wfDvmrpBaseNeighborProbeInterval | 1.3.6.1.4.1.18.3.5.3.12.1.11 | INTEGER | read-write | Neighbor probe interval: how often to send a probe on VIFs |
| INT wfDvmrpBaseRouteSwitchTimeout | 1.3.6.1.4.1.18.3.5.3.12.1.12 | INTEGER | read-write | Route switch timeout. How long to wait, without receiving a subsequent route update from the original neighbor, before switching to a different neighbor. |
| INT wfDvmrpBaseActualRoutes | 1.3.6.1.4.1.18.3.5.3.12.1.13 | INTEGER | read-only | Count of number of entries currently in route table |
| GAU wfDvmrpBaseDebugLevel | 1.3.6.1.4.1.18.3.5.3.12.1.14 | Gauge | read-write | Turn DVMRP log ON or OFF for DVMRP debuging messages The levels are: NO_DISPLAY_LOG 0x0001 - Reserved ROUTE_UPDATE_LOG 0x0002 - Displays all routing table events CACHE_ADD_LOG 0x0004 - Displays events relating to addition of cache entry by the cache gate CACHE_DELETE_LOG 0x0008 - Displays all events relating to deletion of cache entry CACHE_CHANGE_LOG 0x0010 - Displays all events relating to updates of cache entries CACHE_DATA_LOG 0x0020 - obsolete PRUNE_MSG_LOG 0x0040 - Display router received pruning related messages, including prunes, grafts, graft_acks, and neighbor reset PRUNE_XMIT_LOG 0x0080 - Display a messaged when a initial prune state is established for a (src, group). IGMP_COM_LOG 0x0100 - Display communication events between IGMP and DVMRP, events including some hosts joining a group, and all hosts leaving a group. DVMRP_XMIT_LOG 0x0200 - Display transmission events by the router, e.g, prune, grafts... CACHE_NO_GH_LOG 0x0400 - Display buffer forwarding to non-existing main or remote cache gate. CACHE_DBG_LOG 0x0800 - Display general debugging messaages MEM_DBG_LOG 0x1000 - Display dvmrp memory usage activities INTEROP_DBG_LOG 0x2000 - Display dvmrp mospf debug CACHE_BASE_ADD_LOG 0x4000 - Obsolete CACHE_VIF_ADD_LOG 0x8000 - Obsolete CACHE_BASE_DELETE_LOG 0x10000 - Obsolete CACHE_VIF_DELETE_LOG 0x20000 - Obsolete MTRACE_UPDATE_LOG 0x40000 - Displays mtrace update info NEIGHBOR_UPDATE_LOG 0x80000 - Display events relating to addition, deletion and update of neighbor's info MTM_INTERFACE_LOG 0x100000 - Display events relating to MTM-DVMRP interface, events as MTM inbound, outbound interact with DVMRP and entries deletion/addition. ROUTE_ADD_LOG 0x200000 - ROUTE_DEL_LOG 0x400000 - REMOTE_CACHE_ADD_LOG 0x800000 - Display addition event for the outgoing interface of (source, group) cache entry REMOTE_CACHE_DELETE_LOG 0x1000000 - Display deletion event for the outgoing interface of (source, group) cache entry RX_CONFLICT_ROUTE_INFO_LOG 0x2000000 - Display received conflict route information |
| INT wfDvmrpBasePruningEnable | 1.3.6.1.4.1.18.3.5.3.12.1.15 | INTEGER | read-write | Enable or Disable Pruning functionality at the Base level |
| INT wfDvmrpBaseFragmentMtuThreshold | 1.3.6.1.4.1.18.3.5.3.12.1.16 | INTEGER | read-write | the default value is the CSMACD_MTU, and the MINiMUN is X25_DDN_MTU. Both are taken from dp.h |
| INT wfDvmrpBaseMaxRoutes | 1.3.6.1.4.1.18.3.5.3.12.1.17 | INTEGER | read-write | Max number of routes, per slot. This is used to limit the size of routing tables. Note that routes are kept on a per-source network basis, independent of multicast group. This number must include a route for every local network that has a CCT configured for multicasting. |
| INT wfDvmrpBasePolicyEnable | 1.3.6.1.4.1.18.3.5.3.12.1.18 | INTEGER | read-write | Enable or Disable route policy functionality at the Base level |
| INT wfDvmrpBaseHolddownEnable | 1.3.6.1.4.1.18.3.5.3.12.1.19 | INTEGER | read-write | Enable or Disable holddown of deleted routes. |
| wfDvmrpCircuitEntryTable | 1.3.6.1.4.1.18.3.5.3.12.2 | not-accessible | Circuit virtual interfaces (aka physical VIFs) | |
| wfDvmrpCircuitEntry | 1.3.6.1.4.1.18.3.5.3.12.2.1 | not-accessible | One instance of this object exists for every CCT that supports this feature. The instance ID for this object will be the circuit number. | |
| INT wfDvmrpCircuitCreate | 1.3.6.1.4.1.18.3.5.3.12.2.1.1 | INTEGER | read-write | Create or delete |
| INT wfDvmrpCircuitEnable | 1.3.6.1.4.1.18.3.5.3.12.2.1.2 | INTEGER | read-write | Enable or disable DVMRP on this circuit |
| INT wfDvmrpCircuitState | 1.3.6.1.4.1.18.3.5.3.12.2.1.3 | INTEGER | read-only | The current state of the DVMRP interface. Invalid indicates an error in processing the configuration record. |
| INT wfDvmrpCircuitCCT | 1.3.6.1.4.1.18.3.5.3.12.2.1.4 | INTEGER | read-only | This circuit number. |
| INT wfDvmrpCircuitRouteEnable | 1.3.6.1.4.1.18.3.5.3.12.2.1.5 | INTEGER | read-write | Enable/disble this circuit for routing. If enabled, this circuit will be used to propogate routing information, information about this circuit will be incorporated into routing updates, and multicast datagrams will be forwarded 'in native mode' (e.g. as multicast datagrams) via this circuit. If disabled, this circuit exists only to support unicast tunnels; in this case, all other paramters are ignored. |
| INT wfDvmrpCircuitMetric | 1.3.6.1.4.1.18.3.5.3.12.2.1.6 | INTEGER | read-write | Metric. This value represents the cost of this interface; the cost of using this hop. This value must be smaller than the route infinity value |
| INT wfDvmrpCircuitRouteThreshold | 1.3.6.1.4.1.18.3.5.3.12.2.1.7 | INTEGER | read-write | Threshold. This value can be used to filter out datagrams that are being forwarded to a neighboring router; if the IP TTL is not >= the threshold, the datagram is dropped by this router |
| CTR wfDvmrpCircuitInPkts | 1.3.6.1.4.1.18.3.5.3.12.2.1.8 | Counter | read-only | Number of datagrams received on this interface |
| CTR wfDvmrpCircuitOutPkts | 1.3.6.1.4.1.18.3.5.3.12.2.1.9 | Counter | read-only | Number of datagrams send on this interface |
| CTR wfDvmrpCircuitInRouteUpdates | 1.3.6.1.4.1.18.3.5.3.12.2.1.10 | Counter | read-only | Number of DVMRP route update messages received |
| CTR wfDvmrpCircuitOutRouteUpdates | 1.3.6.1.4.1.18.3.5.3.12.2.1.11 | Counter | read-only | Number of DVMRP route update messages sent |
| CTR wfDvmrpCircuitInPktDiscards | 1.3.6.1.4.1.18.3.5.3.12.2.1.12 | Counter | read-only | Number of inbound datagrams discarded due to route not found |
| CTR wfDvmrpCircuitOutPktDiscards | 1.3.6.1.4.1.18.3.5.3.12.2.1.13 | Counter | read-only | Number of outbound datagrams discarded due to route not found |
| INT wfDvmrpCircuitFwdCacheSize | 1.3.6.1.4.1.18.3.5.3.12.2.1.14 | INTEGER | read-write | Maximum number of entries allowed in the Forwarding table at one time. there is a Forwarding table per vif |
| INT wfDvmrpCircuitFwdCacheTTL | 1.3.6.1.4.1.18.3.5.3.12.2.1.15 | INTEGER | read-write | The time_to_live for the Forwarding table entries in seconds . |
| INT wfDvmrpCircuitAdvertiseSelf | 1.3.6.1.4.1.18.3.5.3.12.2.1.16 | INTEGER | read-write | If enabled the router will advertise itself as one of the source net. If not enabled the router will not advertise itself as one of the source net. |
| INT wfDvmrpCircuitFwdCacheEntries | 1.3.6.1.4.1.18.3.5.3.12.2.1.17 | INTEGER | read-only | The most up to date number of entries in the forwarding cache |
| CTR wfDvmrpCircuitInPrunePkts | 1.3.6.1.4.1.18.3.5.3.12.2.1.18 | Counter | read-only | Number of PRUNE datagrams received on this interface |
| CTR wfDvmrpCircuitOutPrunePkts | 1.3.6.1.4.1.18.3.5.3.12.2.1.19 | Counter | read-only | Number of PRUNE datagrams send on this interface |
| CTR wfDvmrpCircuitInGraftPkts | 1.3.6.1.4.1.18.3.5.3.12.2.1.20 | Counter | read-only | Number of GRAFT datagrams received on this interface |
| CTR wfDvmrpCircuitOutGraftPkts | 1.3.6.1.4.1.18.3.5.3.12.2.1.21 | Counter | read-only | Number of GRAFT datagrams send on this interface |
| CTR wfDvmrpCircuitInGraftAckPkts | 1.3.6.1.4.1.18.3.5.3.12.2.1.22 | Counter | read-only | Number of GRAFT_ACK datagrams received on this interface |
| CTR wfDvmrpCircuitOutGraftAckPkts | 1.3.6.1.4.1.18.3.5.3.12.2.1.23 | Counter | read-only | Number of GRAFT_ACK datagrams send on this interface |
| INT wfDvmrpCircuitDefaultRouteSupply | 1.3.6.1.4.1.18.3.5.3.12.2.1.24 | INTEGER | read-write | enabled : Send the default route, 0.0.0.0 if learned, form this interface. disabled: no default route is sent from this interface. generate: generate default route, 0.0.0.0 from this interface. |
| INT wfDvmrpCircuitDefaultRouteListen | 1.3.6.1.4.1.18.3.5.3.12.2.1.25 | INTEGER | read-write | Receive the default route, 0.0.0.0 on this interface |
| INT wfDvmrpCircuitReportDependProbe | 1.3.6.1.4.1.18.3.5.3.12.2.1.26 | INTEGER | read-write | This is to control accepting the route report. According to the protocol, dvmrp should send probe packet before sending the route report packet to the neighbors. But some vendor implementation did not send probes before sending reports. Enable: only process the routes from the neighbor sending probes. Disable: No Dependency (no restriction). |
| INT wfDvmrpCircuitPruneLifeTime | 1.3.6.1.4.1.18.3.5.3.12.2.1.27 | INTEGER | read-write | The life time of the prune message the router sends to its neighbor in seconds. |
| INT wfDvmrpCircuitAcceptAggregateRoutes | 1.3.6.1.4.1.18.3.5.3.12.2.1.28 | INTEGER | read-only | Count of number of routes received have been aggregated to the specific aggregate route currently in route table for this interface. |
| INT wfDvmrpCircuitAnnounceAggregatedRoutes | 1.3.6.1.4.1.18.3.5.3.12.2.1.29 | INTEGER | read-only | Count of number of routes have been aggregated to the specific aggregate route for advertisement currently in route table for this interface. |
| wfDvmrpTunnelEntryTable | 1.3.6.1.4.1.18.3.5.3.12.3 | not-accessible | Tunnel virtual interfaces | |
| wfDvmrpTunnelEntry | 1.3.6.1.4.1.18.3.5.3.12.3.1 | not-accessible | This object is used to specify the set of 'multicast tunnels', unicast pipes that are used to send IP multicast datagrams to remote network multicast routers via intermediate routers that may not support this style of IP multicasting. One instance of this object exists for every separate tunnel destination. The instance identifier is the IP address of the remote router neighbor and the local circuit number. | |
| INT wfDvmrpTunnelCreate | 1.3.6.1.4.1.18.3.5.3.12.3.1.1 | INTEGER | read-write | create/delete |
| INT wfDvmrpTunnelEnable | 1.3.6.1.4.1.18.3.5.3.12.3.1.2 | INTEGER | read-write | enable/disable this tunnel interface |
| INT wfDvmrpTunnelState | 1.3.6.1.4.1.18.3.5.3.12.3.1.3 | INTEGER | read-only | The current state of the DVMRP tunnel interface. Invalid indicates an error in processing the configuration record. |
| INT wfDvmrpTunnelCCT | 1.3.6.1.4.1.18.3.5.3.12.3.1.4 | INTEGER | read-only | The multicast circuit associated with this tunnel. |
| IP wfDvmrpTunnelRemoteRouterIpAddress | 1.3.6.1.4.1.18.3.5.3.12.3.1.5 | IpAddress | read-only | (unicast) IP address of remote network router neighbor. |
| INT wfDvmrpTunnelEncapsMode | 1.3.6.1.4.1.18.3.5.3.12.3.1.6 | INTEGER | read-write | Will these tunnelled datagrams be encapsulated within an IP datagram, or will they be loosely encapsulated using the LSSR option (for the latter, refer to RFC 1075; this is needed for backward compatibility) |
| INT wfDvmrpTunnelMetric | 1.3.6.1.4.1.18.3.5.3.12.3.1.7 | INTEGER | read-write | Cost of using this tunnel |
| INT wfDvmrpTunnelThreshold | 1.3.6.1.4.1.18.3.5.3.12.3.1.8 | INTEGER | read-write | Threshold for forwarding through this tunnel; if TTL < threshold, the datagram is dropped. |
| CTR wfDvmrpTunnelInPkts | 1.3.6.1.4.1.18.3.5.3.12.3.1.9 | Counter | read-only | Number of datagrams received on this interface |
| CTR wfDvmrpTunnelOutPkts | 1.3.6.1.4.1.18.3.5.3.12.3.1.10 | Counter | read-only | Number of datagrams send on this interface |
| CTR wfDvmrpTunnelInRouteUpdates | 1.3.6.1.4.1.18.3.5.3.12.3.1.11 | Counter | read-only | Number of DVMRP route update messages received |
| CTR wfDvmrpTunnelOutRouteUpdates | 1.3.6.1.4.1.18.3.5.3.12.3.1.12 | Counter | read-only | Number of DVMRP route update messages sent |
| CTR wfDvmrpTunnelInPktDiscards | 1.3.6.1.4.1.18.3.5.3.12.3.1.13 | Counter | read-only | Number of inbound datagrams discarded due to route not found or due to invalid inner address (dest address != multicast) |
| CTR wfDvmrpTunnelOutPktDiscards | 1.3.6.1.4.1.18.3.5.3.12.3.1.14 | Counter | read-only | Number of outbound datagrams discarded due to route not found |
| IP wfDvmrpTunnelLocalRouterIpAddress | 1.3.6.1.4.1.18.3.5.3.12.3.1.15 | IpAddress | read-only | (unicast) IP address of local network router. To support multinet. |
| INT wfDvmrpTunnelFwdCacheSize | 1.3.6.1.4.1.18.3.5.3.12.3.1.16 | INTEGER | read-write | Maximum number of entries allowed in the Forwarding table at one time. there is a Forwarding table per vif |
| INT wfDvmrpTunnelFwdCacheTTL | 1.3.6.1.4.1.18.3.5.3.12.3.1.17 | INTEGER | read-write | The time_to_live for the Forwarding table entries in seconds . |
| INT wfDvmrpTunnelFwdCacheEntries | 1.3.6.1.4.1.18.3.5.3.12.3.1.18 | INTEGER | read-only | The most up to date number of entries in the forwarding cache |
| CTR wfDvmrpTunnelInPrunePkts | 1.3.6.1.4.1.18.3.5.3.12.3.1.19 | Counter | read-only | Number of PRUNE datagrams received on this interface |
| CTR wfDvmrpTunnelOutPrunePkts | 1.3.6.1.4.1.18.3.5.3.12.3.1.20 | Counter | read-only | Number of PRUNE datagrams send on this interface |
| CTR wfDvmrpTunnelInGraftPkts | 1.3.6.1.4.1.18.3.5.3.12.3.1.21 | Counter | read-only | Number of GRAFT datagrams received on this interface |
| CTR wfDvmrpTunnelOutGraftPkts | 1.3.6.1.4.1.18.3.5.3.12.3.1.22 | Counter | read-only | Number of GRAFT datagrams send on this interface |
| CTR wfDvmrpTunnelInGraftAckPkts | 1.3.6.1.4.1.18.3.5.3.12.3.1.23 | Counter | read-only | Number of GRAFT_ACK datagrams received on this interface |
| CTR wfDvmrpTunnelOutGraftAckPkts | 1.3.6.1.4.1.18.3.5.3.12.3.1.24 | Counter | read-only | Number of GRAFT_ACK datagrams send on this interface |
| INT wfDvmrpTunnelDefaultRouteSupply | 1.3.6.1.4.1.18.3.5.3.12.3.1.25 | INTEGER | read-write | Send the default route, 0.0.0.0 on this interface |
| INT wfDvmrpTunnelDefaultRouteListen | 1.3.6.1.4.1.18.3.5.3.12.3.1.26 | INTEGER | read-write | Receive the default route, 0.0.0.0 on this interface |
| INT wfDvmrpTunnelCtrlMsgMode | 1.3.6.1.4.1.18.3.5.3.12.3.1.27 | INTEGER | read-write | Dvmrp tunneling control messages encapsulated type. noencaps is the mode that control messages are sent in regular igmp packets with ip protocol type set to IP_PROTOCOL_IGMP. encaps is the mode that control messages are encapsed inside ip packets with ip protocol type set to IP_PROTOCOL_IPINIP. All DVMRP messages sent across tunnels will be encapsulated in the same way as data packets in this mode. |
| INT wfDvmrpTunnelReportDependProbe | 1.3.6.1.4.1.18.3.5.3.12.3.1.28 | INTEGER | read-write | This is to control accepting the route report. According to the protocol, dvmrp should send probe packet before sending the route report packet to the neighbors. But some vendor implementations do not send probes before sending reports. Enable: only process the routes from the neighbor sending probes. Disable: No Dependency (no restriction). |
| INT wfDvmrpTunnelPruneLifeTime | 1.3.6.1.4.1.18.3.5.3.12.3.1.29 | INTEGER | read-write | The life time of the prune message the router send to its neighbor in seconds. |
| INT wfDvmrpTunnelAcceptAggregateRoutes | 1.3.6.1.4.1.18.3.5.3.12.3.1.30 | INTEGER | read-only | Count of number of routes received have been aggregated to the specific aggregate route currently in route table for this interface. |
| INT wfDvmrpTunnelAnnounceAggregatedRoutes | 1.3.6.1.4.1.18.3.5.3.12.3.1.31 | INTEGER | read-only | Count of number of routes have been aggregated to the specific aggregate route for advertisement currently in route table for this interface. |
| wfDvmrpRouteEntryTable | 1.3.6.1.4.1.18.3.5.3.12.4 | not-accessible | MIB proxy: main DVMRP routing table | |
| wfDvmrpRouteEntry | 1.3.6.1.4.1.18.3.5.3.12.4.1 | not-accessible | Supported by mib proxy. One entry exists for each active route. | |
| IP wfDvmrpRouteSourceNetwork | 1.3.6.1.4.1.18.3.5.3.12.4.1.1 | IpAddress | read-only | A source of multicast datagrams |
| IP wfDvmrpRouteSourceMask | 1.3.6.1.4.1.18.3.5.3.12.4.1.2 | IpAddress | read-only | Mask for the specified source network |
| IP wfDvmrpRouteNextHopRouter | 1.3.6.1.4.1.18.3.5.3.12.4.1.3 | IpAddress | read-only | Next hop multicast router to the specified source network; we consider this neighboring router to be on the shortest path to the source. Note that this neighboring router may be a tunnel endpoint. |
| INT wfDvmrpRouteNextHopInterfaceCCT | 1.3.6.1.4.1.18.3.5.3.12.4.1.4 | INTEGER | read-only | Next hop interface (CCT) to the specified source router; we consider this interface to be on the shortest path to the source. |
| IP wfDvmrpRouteNextHopInterfaceTunnelId | 1.3.6.1.4.1.18.3.5.3.12.4.1.5 | IpAddress | read-only | Next hop interface (tunnel id) to the specified source router; we consider this interface to be on the shortest path to the source. |
| IP wfDvmrpRouteNextHopInterfaceLocalTunnelId | 1.3.6.1.4.1.18.3.5.3.12.4.1.6 | IpAddress | read-only | Next hop interface (local tunnel id) to the specified source router; we consider this interface to be on the shortest path to the source. |
| INT wfDvmrpRouteTimer | 1.3.6.1.4.1.18.3.5.3.12.4.1.7 | INTEGER | read-only | route timer |
| INT wfDvmrpRouteState | 1.3.6.1.4.1.18.3.5.3.12.4.1.8 | INTEGER | read-only | Set of flags indicating state of entry. Note that the router uses this field as a bit mask. 0x8000 Network is local to this router 0x4000 Route is being timed 0x2000 Route is garbaged |
| INT wfDvmrpRouteMetric | 1.3.6.1.4.1.18.3.5.3.12.4.1.9 | INTEGER | read-only | current route metric |
| INT wfDvmrpRouteProtocol | 1.3.6.1.4.1.18.3.5.3.12.4.1.10 | INTEGER | read-only | current route protocol dvmrp (2) or mospf (4) or internal (6) which is the route from unicast and incoming interface no i dvmrp configure, if dvmrp is configured then the protocol will be set to 2, see wfIgmpRoutingProtocol |
| INT wfDvmrpRouteType | 1.3.6.1.4.1.18.3.5.3.12.4.1.11 | INTEGER | read-only | The orginal route source from. If it is from pure dvmrp route (0x0001) unicast best route (0x0002) unciast route but has dvmrp interface (0x0003) ospf(0x0004) ospf best route (0x0006) ospf ase route (0x0008) |
| INT wfDvmrpRouteAggregatedType | 1.3.6.1.4.1.18.3.5.3.12.4.1.12 | INTEGER | read-only | Route Aggregated types : 0 - normal route 1 - inbound aggregated route 2 - outbound aggregated route 4 - inbound aggregate route 8 - outbound aggregate route |
| wfDvmrpRouteInterfaceEntryTable | 1.3.6.1.4.1.18.3.5.3.12.5 | not-accessible | MIB proxy: DVMRP VIF routing table | |
| wfDvmrpRouteInterfaceEntry | 1.3.6.1.4.1.18.3.5.3.12.5.1 | not-accessible | Supported by mib proxy. One entry exists for each virtual interface on an active route. It is associated with a route via the source network/ net mask fields. The instance ID includes tunnel ID, which is 0 for non-tunnel interfaces. | |
| IP wfDvmrpRouteInterfaceSourceNetwork | 1.3.6.1.4.1.18.3.5.3.12.5.1.1 | IpAddress | read-only | A source of multicast datagrams |
| IP wfDvmrpRouteInterfaceSourceMask | 1.3.6.1.4.1.18.3.5.3.12.5.1.2 | IpAddress | read-only | Mask for the specified source network |
| INT wfDvmrpRouteInterfaceNextHopInterfaceCCT | 1.3.6.1.4.1.18.3.5.3.12.5.1.3 | INTEGER | read-only | circuit number with which this route is associated |
| IP wfDvmrpRouteInterfaceNextHopInterfaceLocalTunnelId | 1.3.6.1.4.1.18.3.5.3.12.5.1.4 | IpAddress | read-only | Tunnel ID for tunnelled interfaces. This value is zero for non-tunnelled interfaces, otherwise it contains the local IP address of the tunnel. |
| IP wfDvmrpRouteInterfaceNextHopInterfaceTunnelId | 1.3.6.1.4.1.18.3.5.3.12.5.1.5 | IpAddress | read-only | Tunnel ID for tunnelled interfaces. This value is zero for non-tunnelled interfaces, otherwise it contains the remote IP address of the tunnel. |
| INT wfDvmrpRouteInterfaceState | 1.3.6.1.4.1.18.3.5.3.12.5.1.6 | INTEGER | read-only | state of interface for this route. Note that the router uses this field as a bit mask. 0x8000 - interface is leaf 0x4000 - interface is child 0x2000 - interface is in hold-down state 0x1000 - interface has loop neighbor for this route |
| IP wfDvmrpRouteInterfaceDominantRouter | 1.3.6.1.4.1.18.3.5.3.12.5.1.7 | IpAddress | read-only | dominant router address for virtual interface |
| IP wfDvmrpRouteInterfaceSubordinateRouter | 1.3.6.1.4.1.18.3.5.3.12.5.1.8 | IpAddress | read-only | subordinate router address for virtual interface |
| INT wfDvmrpRouteInterfaceHoldDownTimer | 1.3.6.1.4.1.18.3.5.3.12.5.1.9 | INTEGER | read-only | Current value of hold down timer, used to determine if interface is for leaf or non-leaf network. Non-leaf network means that a local network router considers us to be in the shortest path to the source (they have sent us a route update with metric >= infinity). |
| CTR wfDvmrpRouteInterfaceSPInDiscards | 1.3.6.1.4.1.18.3.5.3.12.5.1.10 | Counter | read-only | Count of inbound packets discarded because interface not on shortest path |
| CTR wfDvmrpRouteInterfaceSPOutDiscards | 1.3.6.1.4.1.18.3.5.3.12.5.1.11 | Counter | read-only | Count of outbound packets discarded because interface not on shortest path |
| CTR wfDvmrpRouteInterfaceThresholdOutDiscards | 1.3.6.1.4.1.18.3.5.3.12.5.1.12 | Counter | read-only | Count of outbound packets discarded because of threshold |
| CTR wfDvmrpRouteInterfaceInSuccessfulPkts | 1.3.6.1.4.1.18.3.5.3.12.5.1.13 | Counter | read-only | Count of inbound packets accepted for forwarding |
| CTR wfDvmrpRouteInterfaceOutSuccessfulPkts | 1.3.6.1.4.1.18.3.5.3.12.5.1.14 | Counter | read-only | Count of outbound packets accepted for forwarding |
| INT wfDvmrpRouteInterfaceParentCCT | 1.3.6.1.4.1.18.3.5.3.12.5.1.15 | INTEGER | read-only | circuit number with which this route is associated;parent VIF |
| IP wfDvmrpRouteInterfaceParentLocalTunnelId | 1.3.6.1.4.1.18.3.5.3.12.5.1.16 | IpAddress | read-only | Tunnel ID for tunnelled interfaces. This value is zero for non-tunnelled interfaces, otherwise it contains the local IP address of the tunnel; parent VIF. |
| IP wfDvmrpRouteInterfaceParentTunnelId | 1.3.6.1.4.1.18.3.5.3.12.5.1.17 | IpAddress | read-only | Tunnel ID for tunnelled interfaces. This value is zero for non-tunnelled interfaces, otherwise it contains the remote IP address of the tunnel; parent VIF. |
| wfDvmrpNeighboringRouterEntryTable | 1.3.6.1.4.1.18.3.5.3.12.6 | not-accessible | MIB proxy: DVMRP neighbor table | |
| wfDvmrpNeighboringRouterEntry | 1.3.6.1.4.1.18.3.5.3.12.6.1 | not-accessible | This entry is used to indentify the known neighboring routers for a circuit. This object will be indentified by circuit number, tunnel id (to identify local interface), and the IP address of the neighbor. | |
| INT wfDvmrpNeighboringRouterCCT | 1.3.6.1.4.1.18.3.5.3.12.6.1.1 | INTEGER | read-only | Local circuit number |
| IP wfDvmrpNeighboringRouterLocalTunnelId | 1.3.6.1.4.1.18.3.5.3.12.6.1.2 | IpAddress | read-only | Tunnel Id for interface. This value is zero for non- tunnelled interfaces, otherwise it contains the IP address of the local tunnel endpoint. |
| IP wfDvmrpNeighboringRouterTunnelId | 1.3.6.1.4.1.18.3.5.3.12.6.1.3 | IpAddress | read-only | Tunnel Id for interface. This value is zero for non- tunnelled interfaces, otherwise it contains the IP address of the remote tunnel endpoint. |
| IP wfDvmrpNeighboringRouterIpAddr | 1.3.6.1.4.1.18.3.5.3.12.6.1.4 | IpAddress | read-only | IP address of neighboring router |
| INT wfDvmrpNeighboringRouterState | 1.3.6.1.4.1.18.3.5.3.12.6.1.5 | INTEGER | read-only | State of neighbor. The router uses this as a bit mask. 0x8000 - Neighbor is being timed |
| INT wfDvmrpNeighboringRouterTimer | 1.3.6.1.4.1.18.3.5.3.12.6.1.6 | INTEGER | read-only | Current value of neighbor timer |
| INT wfDvmrpNeighboringRouterGenId | 1.3.6.1.4.1.18.3.5.3.12.6.1.7 | INTEGER | read-only | The neighboring router's generation identifier. |
| INT wfDvmrpNeighboringRouterMajorVersion | 1.3.6.1.4.1.18.3.5.3.12.6.1.8 | INTEGER | read-only | The neighboring router's major DVMRP version number. |
| INT wfDvmrpNeighboringRouterMinorVersion | 1.3.6.1.4.1.18.3.5.3.12.6.1.9 | INTEGER | read-only | The neighboring router's minor DVMRP version number. |
| INT wfDvmrpNeighboringRouterCapabilities | 1.3.6.1.4.1.18.3.5.3.12.6.1.10 | INTEGER | read-only | This object describes the neighboring router's capabilities. The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests. |
RFC description
Wellfleet Distance-Vector Multicast Routing Protocol (DVMRP) MIB for managing multicast routing configuration and statistics on Wellfleet routers and equipment.
Start monitoring Wellfleet/Bay Networks router, legacy (DVMRP neighbor-adjacency/prune-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.