All MIBs › Wellfleet-ISDB-MIB
Category: Wellfleet BayNetworks WAN Interfaces
Description: Manages Wellfleet ISDN basic-rate D-channel parameters, call states, and B-channel allocation.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Wellfleet-ISDB-MIB?
Wellfleet-ISDB-MIB is a proprietary MIB from Wellfleet Communications/Bay Networks that manages ISDN Basic Rate Interface (BRI) D-channel signaling parameters, call states, and B-channel allocation on its routers. It exposes configuration objects for the D-channel signaling setup along with status objects showing current call state and which B-channels are allocated to active calls. It is used to monitor the software/service status of ISDN dial-on-demand or backup links: administrators check whether the D-channel is in service and whether B-channels are being allocated and released correctly as calls come up and down, since a stuck call state can prevent a backup link from establishing when needed. It relies on the ISDN BRI signaling standards (Q.921/Q.931) for its underlying protocol concepts, implemented as a Wellfleet-proprietary management view. It was typically deployed on Wellfleet/Bay Networks routers using ISDN BRI circuits for dial backup or on-demand WAN connectivity. Engineers can download the Wellfleet-ISDB-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-ISDB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Wellfleet/Bay Networks router with ISDN BRI interfaces (legacy)
Monitoring Examples
No sample objects were provided, so this is inferred: an administrator would poll the D-channel status and B-channel allocation/call-state objects to confirm ISDN backup calls establish correctly when the primary link fails. A B-channel stuck in a 'connecting' state without completing, or a D-channel reporting out-of-service, would explain why a dial-backup link failed to activate during a primary circuit outage.
What Can Be Monitored
- D-channel signaling status
- B-channel call state
- B-channel allocation
- ISDN call setup/teardown events
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter |
From RFC1213-MIB
| DisplayString |
From Wellfleet-COMMON-MIB
| wfIsdbGroup | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| wfIsdbCfgTable | 1.3.6.1.4.1.18.3.4.33.1 | not-accessible | Table of Isdb Config Objects | |
| wfIsdbCfgEntry | 1.3.6.1.4.1.18.3.4.33.1.1 | not-accessible | An entry in the Isdb Config Table | |
| INT wfIsdbCfgDelete | 1.3.6.1.4.1.18.3.4.33.1.1.1 | INTEGER | read-write | Create/Delete parameter |
| INT wfIsdbCfgDisable | 1.3.6.1.4.1.18.3.4.33.1.1.2 | INTEGER | read-write | Enable/Disable parameter |
| INT wfIsdbCfgState | 1.3.6.1.4.1.18.3.4.33.1.1.3 | INTEGER | read-only | Current state of the Async port on the I-SDB |
| INT wfIsdbCfgSlot | 1.3.6.1.4.1.18.3.4.33.1.1.4 | INTEGER | read-only | Instance ID Slot, filled in by the ISDB mib gate |
| INT wfIsdbCfgConnector | 1.3.6.1.4.1.18.3.4.33.1.1.5 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| INT wfIsdbCfgCircuit | 1.3.6.1.4.1.18.3.4.33.1.1.6 | INTEGER | read-write | Circuit number, filled in by the ISDB mib gate |
| INT wfIsdbCfgLogFilter | 1.3.6.1.4.1.18.3.4.33.1.1.7 | INTEGER | read-write | Log Filters |
| INT wfIsdbCfgPollInterval | 1.3.6.1.4.1.18.3.4.33.1.1.8 | INTEGER | read-write | Interval that ISDB gate polls ISDB |
| INT wfIsdbCfgAutoRestart | 1.3.6.1.4.1.18.3.4.33.1.1.9 | INTEGER | read-write | Auto restart of ISDB after crash |
| INT wfIsdbCfgAutoUld | 1.3.6.1.4.1.18.3.4.33.1.1.10 | INTEGER | read-write | Auto Up load memory image when ISDB crashes |
| INT wfIsdbCfgUldVolume | 1.3.6.1.4.1.18.3.4.33.1.1.11 | INTEGER | read-write | Volume to Up load memory image on ISDB crash |
| INT wfIsdbImageVersion | 1.3.6.1.4.1.18.3.4.33.1.1.12 | INTEGER | read-only | Version of code running on the Isdb board |
| STR wfIsdbImageDate | 1.3.6.1.4.1.18.3.4.33.1.1.13 | DisplayString | read-only | The creation date of the Isdb Flash Image |
| OCT wfIsdbDiagVersion | 1.3.6.1.4.1.18.3.4.33.1.1.14 | OCTET STRING | read-only | The revision level of the Diagnostic Flash. Major revision level is in the upper 2 bytes, minor revision level in the lower 2 bytes. |
| STR wfIsdbDiagDate | 1.3.6.1.4.1.18.3.4.33.1.1.15 | DisplayString | read-only | The creation date of the Diagnostic Flash |
| wfIsdbStatTable | 1.3.6.1.4.1.18.3.4.33.2 | not-accessible | Table of Isdb Config Objects | |
| wfIsdbStatEntry | 1.3.6.1.4.1.18.3.4.33.2.1 | not-accessible | An entry in the Isdb Config Table | |
| INT wfIsdbStatState | 1.3.6.1.4.1.18.3.4.33.2.1.1 | INTEGER | read-only | Current state of the Async port on the I-SDB |
| INT wfIsdbStatSlot | 1.3.6.1.4.1.18.3.4.33.2.1.2 | INTEGER | read-only | Instance ID Slot, filled in by the ISDB mib gate |
| INT wfIsdbStatConnector | 1.3.6.1.4.1.18.3.4.33.2.1.3 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| INT wfIsdbStatVersion | 1.3.6.1.4.1.18.3.4.33.2.1.4 | INTEGER | read-only | Version of code running on the Isdb board |
| CTR wfIsdbStatCurrentConnCount | 1.3.6.1.4.1.18.3.4.33.2.1.5 | Counter | read-only | Current number of connections made to the Isdb |
| CTR wfIsdbStatTotalConnCount | 1.3.6.1.4.1.18.3.4.33.2.1.6 | Counter | read-only | Total number of connections made to the Isdb |
| CTR wfIsdbStatStartCount | 1.3.6.1.4.1.18.3.4.33.2.1.7 | Counter | read-only | Number of start commands sent to the Isdb |
| INT wfIsdbStatCpuIdleCurrent | 1.3.6.1.4.1.18.3.4.33.2.1.8 | INTEGER | read-only | Number of idle cycles since the last query of this mib |
| INT wfIsdbStatCpuIdleTotal | 1.3.6.1.4.1.18.3.4.33.2.1.9 | INTEGER | read-only | Total number of cpu idle cycles since bootup |
| INT wfIsdbStatMemoryFree | 1.3.6.1.4.1.18.3.4.33.2.1.10 | INTEGER | read-only | Amount of free memory on Isdb |
| INT wfIsdbStatMemoryLargestBlock | 1.3.6.1.4.1.18.3.4.33.2.1.11 | INTEGER | read-only | Largest block of memory on Isdb |
| CTR wfIsdbStatTaskCount | 1.3.6.1.4.1.18.3.4.33.2.1.12 | Counter | read-only | Number of active tasks on Isdb |
| CTR wfIsdbStatMsgQueueLacks | 1.3.6.1.4.1.18.3.4.33.2.1.13 | Counter | read-only | Number of message queue lack of resources |
| CTR wfIsdbStatHardwareTimeouts | 1.3.6.1.4.1.18.3.4.33.2.1.14 | Counter | read-only | Number of hardware timeouts |
| CTR wfIsdbStatAlarmCount | 1.3.6.1.4.1.18.3.4.33.2.1.15 | Counter | read-only | Number of alarms on Isdb |
| CTR wfIsdbStatAuthorUnknown | 1.3.6.1.4.1.18.3.4.33.2.1.16 | Counter | read-only | Not currently used |
| CTR wfIsdbStatAv1Ints | 1.3.6.1.4.1.18.3.4.33.2.1.17 | Counter | read-only | Auto Vector Interrupt 1 |
| CTR wfIsdbStatAv2Ints | 1.3.6.1.4.1.18.3.4.33.2.1.18 | Counter | read-only | Auto Vector Interrupt 2 |
| CTR wfIsdbStatAv3Ints | 1.3.6.1.4.1.18.3.4.33.2.1.19 | Counter | read-only | Auto Vector Interrupt 3 |
| CTR wfIsdbStatAv4Ints | 1.3.6.1.4.1.18.3.4.33.2.1.20 | Counter | read-only | Auto Vector Interrupt 4 |
| CTR wfIsdbStatAv5Ints | 1.3.6.1.4.1.18.3.4.33.2.1.21 | Counter | read-only | Auto Vector Interrupt 5 |
| CTR wfIsdbStatAv6Ints | 1.3.6.1.4.1.18.3.4.33.2.1.22 | Counter | read-only | Auto Vector Interrupt 6 |
| CTR wfIsdbStatAv7Ints | 1.3.6.1.4.1.18.3.4.33.2.1.23 | Counter | read-only | Auto Vector Interrupt 7 |
| CTR wfIsdbStatScc3Ints | 1.3.6.1.4.1.18.3.4.33.2.1.24 | Counter | read-only | Serial communications controller interrupts |
| CTR wfIsdbStatErrorInts | 1.3.6.1.4.1.18.3.4.33.2.1.25 | Counter | read-only | Interrupts caused by errors |
| CTR wfIsdbStatTimer1Ints | 1.3.6.1.4.1.18.3.4.33.2.1.26 | Counter | read-only | Timer 1 Interrupt |
| CTR wfIsdbStatTimer2Ints | 1.3.6.1.4.1.18.3.4.33.2.1.27 | Counter | read-only | Timer 2 Interrupt |
| CTR wfIsdbStatTimer3Ints | 1.3.6.1.4.1.18.3.4.33.2.1.28 | Counter | read-only | Timer 3 Interrupt |
| CTR wfIsdbStatTimer4Ints | 1.3.6.1.4.1.18.3.4.33.2.1.29 | Counter | read-only | Timer 4 Interrupt |
| CTR wfIsdbStatBusErrors | 1.3.6.1.4.1.18.3.4.33.2.1.30 | Counter | read-only | Bus errors on Isdb |
| CTR wfIsdbStatRxFrames | 1.3.6.1.4.1.18.3.4.33.2.1.31 | Counter | read-only | Number of frames received without error |
| CTR wfIsdbStatRxOctets | 1.3.6.1.4.1.18.3.4.33.2.1.32 | Counter | read-only | Number of octets received without error |
| CTR wfIsdbStatRxLacks | 1.3.6.1.4.1.18.3.4.33.2.1.33 | Counter | read-only | Number of Rx frames dropped due to lack of buffer resources |
| CTR wfIsdbStatRxDataLinkMsgLacks | 1.3.6.1.4.1.18.3.4.33.2.1.34 | Counter | read-only | Number of datalink frames dropped due to lack of buffer resources |
| CTR wfIsdbStatRxManagementMsgLacks | 1.3.6.1.4.1.18.3.4.33.2.1.35 | Counter | read-only | Number managment messages dropped due to lack of buffer resources |
| CTR wfIsdbStatRxBadFrames | 1.3.6.1.4.1.18.3.4.33.2.1.36 | Counter | read-only | Number of bad receive frames, caused by FCS errors or non octet aligned. |
| CTR wfIsdbStatRxOverFlows | 1.3.6.1.4.1.18.3.4.33.2.1.37 | Counter | read-only | Number of receive overflows, device FIFO overflowed before next DMA cycle granted. No buffer resources available. |
| CTR wfIsdbStatRxRunts | 1.3.6.1.4.1.18.3.4.33.2.1.38 | Counter | read-only | Number of runt frames received or number of frames where the Carrier Detect signal was lost during reception. |
| CTR wfIsdbStatRxLargeFrames | 1.3.6.1.4.1.18.3.4.33.2.1.39 | Counter | read-only | Number of frames received that exceed the size of a frame with a datalink header + X.25 header + 256 bytes of data (total 265 bytes) |
| CTR wfIsdbStatRxSmallFrames | 1.3.6.1.4.1.18.3.4.33.2.1.40 | Counter | read-only | Number of frames received that are less than the size of the datalink header (< 2 bytes) |
| CTR wfIsdbStatRxIncompleteFrames | 1.3.6.1.4.1.18.3.4.33.2.1.41 | Counter | read-only | Number of frames which were incompletely received. These are frames which may have resulted from FRMRR errors. |
| CTR wfIsdbStatRxInts | 1.3.6.1.4.1.18.3.4.33.2.1.42 | Counter | read-only | Total number of receive interrupts on the isdb board |
| CTR wfIsdbStatRxDataLinkFrames | 1.3.6.1.4.1.18.3.4.33.2.1.43 | Counter | read-only | Total number of datalink frames received |
| CTR wfIsdbStatRxDataLinkDiscards | 1.3.6.1.4.1.18.3.4.33.2.1.44 | Counter | read-only | Number of datalink frames that were discarded |
| CTR wfIsdbStatRxManagementFrames | 1.3.6.1.4.1.18.3.4.33.2.1.45 | Counter | read-only | Number of management frames received |
| CTR wfIsdbStatRxUnknownFrames | 1.3.6.1.4.1.18.3.4.33.2.1.46 | Counter | read-only | Number of unknown frames received |
| CTR wfIsdbStatTxFrames | 1.3.6.1.4.1.18.3.4.33.2.1.47 | Counter | read-only | Total number of frames transmitted without error |
| CTR wfIsdbStatTxOctets | 1.3.6.1.4.1.18.3.4.33.2.1.48 | Counter | read-only | Total number of octets transmitted without error |
| CTR wfIsdbStatTxLacks | 1.3.6.1.4.1.18.3.4.33.2.1.49 | Counter | read-only | Number of frames clipped in driver's transmit routine due to transmit congestion. |
| CTR wfIsdbStatTxUnderFlows | 1.3.6.1.4.1.18.3.4.33.2.1.50 | Counter | read-only | Number of transmission underflows, device FIFO went empty before next DMA request was granted. |
| CTR wfIsdbStatTxAbortedFrames | 1.3.6.1.4.1.18.3.4.33.2.1.51 | Counter | read-only | Number of frames where CTS was lost during transmission. |
| CTR wfIsdbStatTxMsgs | 1.3.6.1.4.1.18.3.4.33.2.1.52 | Counter | read-only | Total number of messages transmitted |
| CTR wfIsdbStatTxLargeMsgs | 1.3.6.1.4.1.18.3.4.33.2.1.53 | Counter | read-only | Number of messages transmitted to the driver that exceed the size of the datalink header + X.25 header + 256 bytes of data (total 265 bytes) |
| CTR wfIsdbStatTxSmallMsgs | 1.3.6.1.4.1.18.3.4.33.2.1.54 | Counter | read-only | Number of messages transmitted to the driver that are less than the size of the datalink header ( < 2 bytes) |
| CTR wfIsdbStatTxInts | 1.3.6.1.4.1.18.3.4.33.2.1.55 | Counter | read-only | Total number of transmit interrupts on the isdb board |
| CTR wfIsdbStatTxDataLinkFrames | 1.3.6.1.4.1.18.3.4.33.2.1.56 | Counter | read-only | Number of datalink frames transmitted |
| CTR wfIsdbStatTxManagementFrames | 1.3.6.1.4.1.18.3.4.33.2.1.57 | Counter | read-only | Number of management frames transmitted |
| CTR wfIsdbStatTxUnknownFrames | 1.3.6.1.4.1.18.3.4.33.2.1.58 | Counter | read-only | Number of unknown frames transmitted |
| wfIsdbPortDefaultCfgTable | 1.3.6.1.4.1.18.3.4.33.3 | not-accessible | ASYNC line record | |
| wfIsdbPortDefaultCfgEntry | 1.3.6.1.4.1.18.3.4.33.3.1 | not-accessible | An entry in the ASYNC table | |
| INT wfIsdbPortDefaultCfgDelete | 1.3.6.1.4.1.18.3.4.33.3.1.1 | INTEGER | read-write | Create/Delete parameter |
| INT wfIsdbPortDefaultCfgDisable | 1.3.6.1.4.1.18.3.4.33.3.1.2 | INTEGER | read-write | Enable/Disable parameter |
| INT wfIsdbPortDefaultCfgState | 1.3.6.1.4.1.18.3.4.33.3.1.3 | INTEGER | read-only | Current state of the Async port on the I-SDB |
| INT wfIsdbPortDefaultCfgSlot | 1.3.6.1.4.1.18.3.4.33.3.1.4 | INTEGER | read-only | Instance ID Slot, filled in by the ISDB mib gate |
| INT wfIsdbPortDefaultCfgConnector | 1.3.6.1.4.1.18.3.4.33.3.1.5 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| INT wfIsdbPortDefaultCfgNumber | 1.3.6.1.4.1.18.3.4.33.3.1.6 | INTEGER | read-only | Instance ID Async Port, filled in by the ISDB mib gate |
| INT wfIsdbPortDefaultCfgBaudRate | 1.3.6.1.4.1.18.3.4.33.3.1.7 | INTEGER | read-write | Baud rate configured on this Async Port |
| INT wfIsdbPortDefaultCfgDataBits | 1.3.6.1.4.1.18.3.4.33.3.1.8 | INTEGER | read-write | Number of data bits configured on this Async Port |
| INT wfIsdbPortDefaultCfgParity | 1.3.6.1.4.1.18.3.4.33.3.1.9 | INTEGER | read-write | Type of parity configured on this Async Port |
| INT wfIsdbPortDefaultCfgStopBits | 1.3.6.1.4.1.18.3.4.33.3.1.10 | INTEGER | read-write | Number of stop bits configured on this Async Port |
| INT wfIsdbPortDefaultCfgCts | 1.3.6.1.4.1.18.3.4.33.3.1.11 | INTEGER | read-write | DCE (output) configuration of the CTS signal |
| INT wfIsdbPortDefaultCfgDsr | 1.3.6.1.4.1.18.3.4.33.3.1.12 | INTEGER | read-write | DCE (output) configuration of the DSR signal |
| INT wfIsdbPortDefaultCfgDcd | 1.3.6.1.4.1.18.3.4.33.3.1.13 | INTEGER | read-write | DCE (output) configuration of the DCD signal |
| STR wfIsdbPortDefaultCfgPrompt | 1.3.6.1.4.1.18.3.4.33.3.1.14 | DisplayString | read-write | Character string to be used for Async Port prompt |
| INT wfIsdbPortDefaultCfgCommandParser | 1.3.6.1.4.1.18.3.4.33.3.1.15 | INTEGER | read-write | Default command parser for Async Port |
| INT wfIsdbPortDefaultCfgInactivityTimeOut | 1.3.6.1.4.1.18.3.4.33.3.1.16 | INTEGER | read-write | Async port is reset after inactivity period |
| INT wfIsdbPortDefaultCfgRxQueueSize | 1.3.6.1.4.1.18.3.4.33.3.1.17 | INTEGER | read-write | Size of the async port's receive queue |
| INT wfIsdbPortDefaultCfgTxQueueSize | 1.3.6.1.4.1.18.3.4.33.3.1.18 | INTEGER | read-write | Size of the async port's transmit queue |
| INT wfIsdbPortDefaultCfgRxXoff | 1.3.6.1.4.1.18.3.4.33.3.1.19 | INTEGER | read-write | Flow Control Xon/Xoff for Isdb's async port |
| INT wfIsdbPortDefaultCfgTxXoff | 1.3.6.1.4.1.18.3.4.33.3.1.20 | INTEGER | read-write | Flow Control Xon/Xoff for remote terminal |
| INT wfIsdbPortDefaultCfgDtrAction | 1.3.6.1.4.1.18.3.4.33.3.1.21 | INTEGER | read-write | Determines whether or not an action is taken when the DTR signal changes |
| INT wfIsdbPortDefaultCfgRxXoffAction | 1.3.6.1.4.1.18.3.4.33.3.1.22 | INTEGER | read-write | Determine whether or not we notify the application when an Xon or Xoff change occurs |
| wfIsdbPortCurrentCfgTable | 1.3.6.1.4.1.18.3.4.33.4 | not-accessible | ASYNC Current line record | |
| wfIsdbPortCurrentCfgEntry | 1.3.6.1.4.1.18.3.4.33.4.1 | not-accessible | An entry in the ASYNC table | |
| INT wfIsdbPortCurrentCfgState | 1.3.6.1.4.1.18.3.4.33.4.1.1 | INTEGER | read-only | Current state of the Async port on the I-SDB |
| INT wfIsdbPortCurrentCfgSlot | 1.3.6.1.4.1.18.3.4.33.4.1.2 | INTEGER | read-only | Instance ID Slot, filled in by the ISDB mib gate |
| INT wfIsdbPortCurrentCfgConnector | 1.3.6.1.4.1.18.3.4.33.4.1.3 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| INT wfIsdbPortCurrentCfgNumber | 1.3.6.1.4.1.18.3.4.33.4.1.4 | INTEGER | read-only | Instance ID Async Port, filled in by the ISDB mib gate |
| INT wfIsdbPortCurrentCfgBaudRate | 1.3.6.1.4.1.18.3.4.33.4.1.5 | INTEGER | read-only | Baud rate configured on this Async Port |
| INT wfIsdbPortCurrentCfgDataBits | 1.3.6.1.4.1.18.3.4.33.4.1.6 | INTEGER | read-only | Number of data bits configured on this Async Port |
| INT wfIsdbPortCurrentCfgParity | 1.3.6.1.4.1.18.3.4.33.4.1.7 | INTEGER | read-only | Type of parity configured on this Async Port |
| INT wfIsdbPortCurrentCfgStopBits | 1.3.6.1.4.1.18.3.4.33.4.1.8 | INTEGER | read-only | Number of stop bits configured on this Async Port |
| INT wfIsdbPortCurrentCfgCts | 1.3.6.1.4.1.18.3.4.33.4.1.9 | INTEGER | read-only | DCE (output) configuration of the CTS signal |
| INT wfIsdbPortCurrentCfgDsr | 1.3.6.1.4.1.18.3.4.33.4.1.10 | INTEGER | read-only | DCE (output) configuration of the DSR signal |
| INT wfIsdbPortCurrentCfgDcd | 1.3.6.1.4.1.18.3.4.33.4.1.11 | INTEGER | read-only | DCE (output) configuration of the DCD signal |
| STR wfIsdbPortCurrentCfgPrompt | 1.3.6.1.4.1.18.3.4.33.4.1.12 | DisplayString | read-only | Character string to be used for Async Port prompt |
| INT wfIsdbPortCurrentCfgCommandParser | 1.3.6.1.4.1.18.3.4.33.4.1.13 | INTEGER | read-only | Current command parser for Async Port |
| INT wfIsdbPortCurrentCfgInactivityTimeout | 1.3.6.1.4.1.18.3.4.33.4.1.14 | INTEGER | read-only | Async port is reset after inactivity period |
| INT wfIsdbPortCurrentCfgRxQueueSize | 1.3.6.1.4.1.18.3.4.33.4.1.15 | INTEGER | read-only | Size of the async port's receive queue |
| INT wfIsdbPortCurrentCfgTxQueueSize | 1.3.6.1.4.1.18.3.4.33.4.1.16 | INTEGER | read-only | Size of the async port's transmit queue |
| INT wfIsdbPortCurrentCfgRxXoff | 1.3.6.1.4.1.18.3.4.33.4.1.17 | INTEGER | read-only | Flow Control Xon/Xoff for Isdb's async port |
| INT wfIsdbPortCurrentCfgTxXoff | 1.3.6.1.4.1.18.3.4.33.4.1.18 | INTEGER | read-only | Flow Control Xon/Xoff for remote terminal |
| INT wfIsdbPortCurrentCfgDtrAction | 1.3.6.1.4.1.18.3.4.33.4.1.19 | INTEGER | read-only | Determines whether or not an action is taken when the DTR signal changes |
| INT wfIsdbPortCurrentCfgRxXoffAction | 1.3.6.1.4.1.18.3.4.33.4.1.20 | INTEGER | read-only | Determine whether or not we notify the application when an Xon or Xoff change occurs |
| wfIsdbPortStatTable | 1.3.6.1.4.1.18.3.4.33.5 | not-accessible | ASYNC line record | |
| wfIsdbPortStatEntry | 1.3.6.1.4.1.18.3.4.33.5.1 | not-accessible | An entry in the ASYNC table | |
| INT wfIsdbPortStatState | 1.3.6.1.4.1.18.3.4.33.5.1.1 | INTEGER | read-only | Current state of the Async port on the I-SDB |
| INT wfIsdbPortStatSlot | 1.3.6.1.4.1.18.3.4.33.5.1.2 | INTEGER | read-only | Instance ID Slot, filled in by the ISDB mib gate |
| INT wfIsdbPortStatConnector | 1.3.6.1.4.1.18.3.4.33.5.1.3 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| INT wfIsdbPortStatNumber | 1.3.6.1.4.1.18.3.4.33.5.1.4 | INTEGER | read-only | Instance ID Async Port, filled in by the ISDB mib gate |
| CTR wfIsdbPortStatRxOctets | 1.3.6.1.4.1.18.3.4.33.5.1.5 | Counter | read-only | Number of octets received on Async Port |
| CTR wfIsdbPortStatRxLacks | 1.3.6.1.4.1.18.3.4.33.5.1.6 | Counter | read-only | Number of lack of resources encountered while receiving on Async Port |
| CTR wfIsdbPortStatRxWaits | 1.3.6.1.4.1.18.3.4.33.5.1.7 | Counter | read-only | Number of times we had to wait because the receive queue was full |
| CTR wfIsdbPortStatTxOctets | 1.3.6.1.4.1.18.3.4.33.5.1.8 | Counter | read-only | Number of octets transmitted on Async Port |
| CTR wfIsdbPortStatTxLacks | 1.3.6.1.4.1.18.3.4.33.5.1.9 | Counter | read-only | Number of lack of resources encountered when transmitting on Async Port |
| CTR wfIsdbPortStatTxWaits | 1.3.6.1.4.1.18.3.4.33.5.1.10 | Counter | read-only | Number of times we had to wait because the transmit queue was full |
| CTR wfIsdbPortStatBreaksDetected | 1.3.6.1.4.1.18.3.4.33.5.1.11 | Counter | read-only | Number of Breaks detected on Async Port |
| CTR wfIsdbPortStatParityErrors | 1.3.6.1.4.1.18.3.4.33.5.1.12 | Counter | read-only | Number of Parity Errors detected on Async Port |
| CTR wfIsdbPortStatFramingErrors | 1.3.6.1.4.1.18.3.4.33.5.1.13 | Counter | read-only | Number of Framing Errors detected on Async Port |
| CTR wfIsdbPortStatOverrunErrors | 1.3.6.1.4.1.18.3.4.33.5.1.14 | Counter | read-only | Async port is reset after inactivity period |
| INT wfIsdbPortStatCtsState | 1.3.6.1.4.1.18.3.4.33.5.1.15 | INTEGER | read-only | Current CTS state |
| CTR wfIsdbPortStatCtsTransitions | 1.3.6.1.4.1.18.3.4.33.5.1.16 | Counter | read-only | Number of times CTS has changed state |
| INT wfIsdbPortStatRtsState | 1.3.6.1.4.1.18.3.4.33.5.1.17 | INTEGER | read-only | Current RTS state |
| CTR wfIsdbPortStatRtsTransitions | 1.3.6.1.4.1.18.3.4.33.5.1.18 | Counter | read-only | Number of times that RTS has changed state |
| INT wfIsdbPortStatDsrState | 1.3.6.1.4.1.18.3.4.33.5.1.19 | INTEGER | read-only | Current DSR state |
| CTR wfIsdbPortStatDsrTransitions | 1.3.6.1.4.1.18.3.4.33.5.1.20 | Counter | read-only | Number of times DSR has changed state |
| INT wfIsdbPortStatDcdState | 1.3.6.1.4.1.18.3.4.33.5.1.21 | INTEGER | read-only | Current DCD state |
| CTR wfIsdbPortStatDcdTransitions | 1.3.6.1.4.1.18.3.4.33.5.1.22 | Counter | read-only | Number of times DCD has changed state |
| INT wfIsdbPortStatDtrState | 1.3.6.1.4.1.18.3.4.33.5.1.23 | INTEGER | read-only | Current DTR state |
| CTR wfIsdbPortStatDtrTransitions | 1.3.6.1.4.1.18.3.4.33.5.1.24 | Counter | read-only | Number of times DTR has changed state |
| CTR wfIsdbPortStatRxInts | 1.3.6.1.4.1.18.3.4.33.5.1.25 | Counter | read-only | Number of receive interrupts on this port |
| CTR wfIsdbPortStatTxInts | 1.3.6.1.4.1.18.3.4.33.5.1.26 | Counter | read-only | Number of transmit interrupts on this port |
| CTR wfIsdbPortStatModemInts | 1.3.6.1.4.1.18.3.4.33.5.1.27 | Counter | read-only | Number of modem interrupts on this port |
| CTR wfIsdbPortStatSpecialCharCount | 1.3.6.1.4.1.18.3.4.33.5.1.28 | Counter | read-only | Count of the number of times XON/XOFF changes are detected |
| INT wfIsdbPortStatRxState | 1.3.6.1.4.1.18.3.4.33.5.1.29 | INTEGER | read-only | Hardware chip enabled/disabled for receiving |
| INT wfIsdbPortStatRxFlowState | 1.3.6.1.4.1.18.3.4.33.5.1.30 | INTEGER | read-only | Isdb board suspends/resumes output to the remote terminal |
| INT wfIsdbPortStatTxState | 1.3.6.1.4.1.18.3.4.33.5.1.31 | INTEGER | read-only | Hardware chip enabled/disabled for transmitting |
| INT wfIsdbPortStatTxFlowState | 1.3.6.1.4.1.18.3.4.33.5.1.32 | INTEGER | read-only | Remote terminal suspends/resumes output to the isdb board |
RFC description
Wellfleet Communications Integrated Services Database (ISDB) MIB; manages network service definitions and configurations for Wellfleet routers.
Start monitoring Wellfleet/Bay Networks router with ISDN BRI interfaces, legacy (D-channel/B-channel call-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.