Wellfleet-IFP-MIB

All MIBs › Wellfleet-IFP-MIB

Category: Wellfleet BayNetworks System Management

Description: Manages Wellfleet interface policy parameters including traffic shaping and queuing configurations.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-IFP-MIB?

This is a legacy enterprise MIB from Wellfleet Communications (a router vendor later merged into Bay Networks/Nortel) covering "IFP," or interface policy, parameters such as traffic shaping and queuing configuration on Wellfleet routers. No module description or sample object list is available for this module, so specifics of its object tree can't be confirmed, but by name it is expected to expose per-interface QoS/queuing configuration rather than hardware sensor data. In general such interface-policy MIBs are used to monitor and adjust how traffic is scheduled and shaped on a router interface, which indirectly reflects device performance under load. It likely depends on the base Wellfleet enterprise MIB tree and standard IF-MIB interface indexing conventions typical of routers from that era. It would have been deployed on legacy Wellfleet/Bay Networks routers in enterprise WAN environments during the 1990s. Network engineers evaluating or troubleshooting this functionality can download the Wellfleet-IFP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-IFP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet Communications routers (legacy, later Bay Networks/Nortel)

Monitoring Examples

No module description or sample object names are provided for this MIB, so no verified table or object names are available to describe a concrete polling scenario; any specific object names would be speculative.

What Can Be Monitored

interface traffic shaping settings
queuing policy configuration
per-interface policy assignment

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge

From Wellfleet-COMMON-MIB

wfIfpGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfIfpDrvCfgTable	1.3.6.1.4.1.18.3.4.34.2.1		not-accessible	Internet Fowarding Processor(IFP) Configuration Record
wfIfpDrvCfgEntry	1.3.6.1.4.1.18.3.4.34.2.1.1		not-accessible	Information about a particular driver
INT wfIfpDrvCfgState	1.3.6.1.4.1.18.3.4.34.2.1.1.1	INTEGER	read-write	Driver state parameter.
INT wfIfpDrvCfgSlot	1.3.6.1.4.1.18.3.4.34.2.1.1.2	INTEGER	read-only	Slot number -- instance id.
INT wfIfpDrvCfgHeartbeatPeriod	1.3.6.1.4.1.18.3.4.34.2.1.1.3	INTEGER	read-write	The timer period, in seconds, which defines how often heartbeat messages are send to the IFP. A value of zero disables the heartbeat service.
INT wfIfpDrvCfgHiPriQueRdEnable	1.3.6.1.4.1.18.3.4.34.2.1.1.4	INTEGER	read-write	Debug mode parameter enables reading and process of hi priority outbound queues. The queue enable is a bit mask [9:0] and is described as the following Enable CAP1 0x00000001 Enable CAP2 0x00000002 Enable CAP3 0x00000004 Enable CAP4 0x00000008 Enable CAP5 0x00000010 Enable SSP0 0x00000020 Enable SSP1 0x00000040 Enable Atm0 0x00000080 Enable Atm1 0x00000100 Enable Mcast 0x00000200 Multiple queues can be enabled by oring the selected bits together
INT wfIfpDrvCfgLoPriQueRdEnable	1.3.6.1.4.1.18.3.4.34.2.1.1.5	INTEGER	read-write	Debug mode parameter enables reading and process of lo priority outbound queues. The queue enable is a bit mask [9:0] and is described as the following Enable CAP1 0x00000001 Enable CAP2 0x00000002 Enable CAP3 0x00000004 Enable CAP4 0x00000008 Enable CAP5 0x00000010 Enable SSP0 0x00000020 Enable SSP1 0x00000040 Enable Atm0 0x00000080 Enable Atm1 0x00000100 Enable Mcast 0x00000200 Multiple queues can be enabled by oring the selected bits together
INT wfIfpDrvCfgPortDrainEnable	1.3.6.1.4.1.18.3.4.34.2.1.1.6	INTEGER	read-write	Debug mode parameter enables the draining of outbound queues for a given port without sending data to the linecard. 1 bit per output port. Enable drain CAP1 0x00000001 Enable drain CAP2 0x00000002 Enable drain CAP3 0x00000004 Enable drain CAP4 0x00000008 Enable drain CAP5 0x00000010 Enable drain SSP0 0x00000020 Enable drain SSP1 0x00000040 Enable drain Atm0 0x00000080 Enable drain Atm1 0x00000100 Multiple queues can be enabled by oring the selected bits together
INT wfIfpDrvCfgSspPktTypeI	1.3.6.1.4.1.18.3.4.34.2.1.1.7	INTEGER	read-write
INT wfIfpDrvCfgSspPktTypeII	1.3.6.1.4.1.18.3.4.34.2.1.1.8	INTEGER	read-write
INT wfIfpDrvCfgCap0PktTypeI	1.3.6.1.4.1.18.3.4.34.2.1.1.9	INTEGER	read-write
INT wfIfpDrvCfgCap0PktTypeII	1.3.6.1.4.1.18.3.4.34.2.1.1.10	INTEGER	read-write
INT wfIfpDrvCfgCap1PktTypeI	1.3.6.1.4.1.18.3.4.34.2.1.1.11	INTEGER	read-write
INT wfIfpDrvCfgCap1PktTypeII	1.3.6.1.4.1.18.3.4.34.2.1.1.12	INTEGER	read-write
INT wfIfpDrvCfgAtmPktTypeI	1.3.6.1.4.1.18.3.4.34.2.1.1.13	INTEGER	read-write
INT wfIfpDrvCfgAtmPktTypeII	1.3.6.1.4.1.18.3.4.34.2.1.1.14	INTEGER	read-write
INT wfIfpDrvCfgMax2kBufferCnt	1.3.6.1.4.1.18.3.4.34.2.1.1.15	INTEGER	read-write	Number of 2Kbyte buffers to carve from Buffer Memory
INT wfIfpDrvCfgMax8kBufferCnt	1.3.6.1.4.1.18.3.4.34.2.1.1.16	INTEGER	read-write	Number of 8Kbyte buffers to carve from buffer memory
INT wfIfpDrvCfgBufferOffset	1.3.6.1.4.1.18.3.4.34.2.1.1.17	INTEGER	read-write	Buffer offset in bytes, where forwarding engine begins to process received frames
INT wfIfpDrvCfgCapHiPriQueClip	1.3.6.1.4.1.18.3.4.34.2.1.1.18	INTEGER	read-write	The queue clip threshold for all high priority outbound queues destined for channelized access slots
INT wfIfpDrvCfgCapLoPriQueClip	1.3.6.1.4.1.18.3.4.34.2.1.1.19	INTEGER	read-write	The queue clip threshold for all low priority outbound queues destined for channelized access slots
INT wfIfpDrvCfgAtmHiPriQueClip	1.3.6.1.4.1.18.3.4.34.2.1.1.20	INTEGER	read-write	The queue clip threshold for all high priority outbound queues destined for ATM OC-12 slots
INT wfIfpDrvCfgAtmLoPriQueClip	1.3.6.1.4.1.18.3.4.34.2.1.1.21	INTEGER	read-write	The queue clip threshold for all low priority outbound queues destined for ATM OC-12 slots
INT wfIfpDrvCfgSspHiPriQueClip	1.3.6.1.4.1.18.3.4.34.2.1.1.22	INTEGER	read-write	The queue clip threshold for all high priority outbound queues destined for system service processor slots
INT wfIfpDrvCfgSspLoPriQueClip	1.3.6.1.4.1.18.3.4.34.2.1.1.23	INTEGER	read-write	The queue clip threshold for all low priority outbound queues destined for system service processor slots
INT wfIfpDrvCfgMcastHiPriClip	1.3.6.1.4.1.18.3.4.34.2.1.1.24	INTEGER	read-write	The queue clip threshold for all high priority outbound multicast traffic
INT wfIfpDrvCfgMcastLoPriClip	1.3.6.1.4.1.18.3.4.34.2.1.1.25	INTEGER	read-write	The queue clip threshold for all low priority outbound multicast traffic
INT wfIfpDrvCfgRspActiveStreamMask	1.3.6.1.4.1.18.3.4.34.2.1.1.26	INTEGER	read-write	Bitmask 1 to 31, each bit representing a RSP instruction stream. If a bit is set the corresponding RSP stream is started
INT wfIfpDrvCfgToSspLoPriInterval	1.3.6.1.4.1.18.3.4.34.2.1.1.27	INTEGER	read-write	Interval (msec) for Rate control of Lo Priority Packets destined for the SSP. Maximim of wfIfpDrvCfgToSspLoPriPktCnt packets transmitted to SSP during the interval
INT wfIfpDrvCfgToSspLoPriPktCnt	1.3.6.1.4.1.18.3.4.34.2.1.1.28	INTEGER	read-write	Maximum number of packets sent to the SSP during the wfIfpDrvCfgToSspLoPriInterval Rate control interval
wfIfpStatsTable	1.3.6.1.4.1.18.3.4.34.2.2		not-accessible	Internet Fowarding Processor(IFP) Statistics Record
wfIfpStatsEntry	1.3.6.1.4.1.18.3.4.34.2.2.1		not-accessible	Information about a particular driver
INT wfIfpStatsSlot	1.3.6.1.4.1.18.3.4.34.2.2.1.1	INTEGER	read-only	The slot number of the Internet Fowarding Processor which is the instance id of the statistics record.
CTR wfIfpStatsCap0HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.2	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port zero high priority queue
CTR wfIfpStatsCap0LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.3	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port zero low priority queue
CTR wfIfpStatsCap1HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.4	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port one high priority queue
CTR wfIfpStatsCap1LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.5	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port one low priority queue
CTR wfIfpStatsCap2HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.6	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port two high priority queue
CTR wfIfpStatsCap2LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.7	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port two low priority queue
CTR wfIfpStatsCap3HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.8	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port three high priority queue
CTR wfIfpStatsCap3LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.9	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port three low priority queue
CTR wfIfpStatsCap4HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.10	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port four high priority queue
CTR wfIfpStatsCap4LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.11	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the access port four low priority queue
CTR wfIfpStatsAtm0HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.12	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of trunk port zero high priority queue
CTR wfIfpStatsAtm0LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.13	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the trunk port zero low priority queue
CTR wfIfpStatsAtm1HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.14	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of trunk port one high priority queue
CTR wfIfpStatsAtm1LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.15	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the trunk port one low priority queue
CTR wfIfpStatsSsp0HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.16	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of SSP port zero high priority queue
CTR wfIfpStatsSsp0LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.17	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of SSP port zero low priority queue
CTR wfIfpStatsSsp1HiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.18	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of SSP port one high priority queue
CTR wfIfpStatsSsp1LoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.19	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of SSP port one low priority queue
CTR wfIfpStatsMcastHiPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.20	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the multicast high priority queue
CTR wfIfpStatsMcastLoPriQueDepth	1.3.6.1.4.1.18.3.4.34.2.2.1.21	Counter	read-only	The instantaneous queue depth, as measured in descriptors, of the multicast low priority queue
CTR wfIfpStatsCap0HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.22	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port zero high priority queue.
CTR wfIfpStatsCap0LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.23	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port zero low priority queue.
CTR wfIfpStatsCap1HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.24	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port one high priority queue.
CTR wfIfpStatsCap1LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.25	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port one low priority queue.
CTR wfIfpStatsCap2HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.26	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port two high priority queue.
CTR wfIfpStatsCap2LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.27	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port two low priority queue.
CTR wfIfpStatsCap3HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.28	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port three high priority queue.
CTR wfIfpStatsCap3LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.29	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port three low priority queue.
CTR wfIfpStatsCap4HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.30	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port four high priority queue.
CTR wfIfpStatsCap4LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.31	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the access port four low priority queue.
CTR wfIfpStatsAtm0HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.32	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the trunk port zero high priority queue.
CTR wfIfpStatsAtm0LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.33	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the trunk port zero low priority queue.
CTR wfIfpStatsAtm1HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.34	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the trunk port one high priority queue.
CTR wfIfpStatsAtm1LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.35	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the trunk port one low priority queue.
CTR wfIfpStatsSsp0HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.36	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the SSP port zero high priority queue.
CTR wfIfpStatsSsp0LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.37	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the SSP port zero low priority queue.
CTR wfIfpStatsSsp1HiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.38	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the SSP port one high priority queue.
CTR wfIfpStatsSsp1LoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.39	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the SSP port one low priority queue.
CTR wfIfpStatsMcastHiPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.40	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the multicast low priority queue.
CTR wfIfpStatsMcastLoPriQueClips	1.3.6.1.4.1.18.3.4.34.2.2.1.41	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the multicast low priority queue.
CTR wfIfpStatsSspLoPriDrops	1.3.6.1.4.1.18.3.4.34.2.2.1.42	Counter	read-only	The number of descriptors clipped because the clip threshold was execeeded for the SSP port one low priority queue.
CTR wfIfpStatsRecvCrcErrors	1.3.6.1.4.1.18.3.4.34.2.2.1.43	Counter	read-only	The number of CRC errors detected on incomming packets from all ports CAP0,CAP1,ATMP12 & all SSP paths
CTR wfIfpStatsBuf2kStackPtr	1.3.6.1.4.1.18.3.4.34.2.2.1.44	Counter	read-only	The 2Kbyte buffer pool stack pointer, indicating how many 2Kbyte buffers are presently available
CTR wfIfpStatsBuf8kStackPtr	1.3.6.1.4.1.18.3.4.34.2.2.1.45	Counter	read-only	The 8Kbyte buffer pool stack pointer, indicating how many 8Kbyte buffers are presently available
CTR wfIfpStatsBuf2kStackLimit	1.3.6.1.4.1.18.3.4.34.2.2.1.46	Counter	read-only	The 2Kbyte buffer pool stack limit, indicating the maximum number of 2Kbyte buffers available for this pool
CTR wfIfpStatsBuf8kStackLimit	1.3.6.1.4.1.18.3.4.34.2.2.1.47	Counter	read-only	The 8Kbyte buffer pool stack limit, indicating the maximum number of 8Kbyte buffers available for this pool
INT wfIfpStatsRspState	1.3.6.1.4.1.18.3.4.34.2.2.1.48	INTEGER	read-only	Reflects the actual state of the RSP forwarding engine 0:dead, 1:Up, 2:init, -1:fwd streams down
INT wfIfpStatsRspActiveStreamMask	1.3.6.1.4.1.18.3.4.34.2.2.1.49	INTEGER	read-only	Bit mask of active RSP instruction streams. Each bit set to a one indicates the stream is active
CTR wfIfpStatsBadDesc	1.3.6.1.4.1.18.3.4.34.2.2.1.50	Counter	read-only	Number of packets read by the RSP with the error bit set which are dropped
CTR wfIfpStatsDispatchMiss	1.3.6.1.4.1.18.3.4.34.2.2.1.51	Counter	read-only	Number of packets received, which miss the fowarding dispatch table lookup and are dropped
CTR wfIfpStatsSspDeliversHi	1.3.6.1.4.1.18.3.4.34.2.2.1.52	Counter	read-only	Number of packets received, which are sent to the SSP for processing - Hi Priority
CTR wfIfpStatsSspDeliversLo	1.3.6.1.4.1.18.3.4.34.2.2.1.53	Counter	read-only	Number of packets received, which are sent to the SSP for processing - Lo Priority
CTR wfIfpStatsSspIpDeliversHi	1.3.6.1.4.1.18.3.4.34.2.2.1.54	Counter	read-only	Number of IP packets recieved, which are sent to the SSP for further processing - Hi Priority
CTR wfIfpStatsSspIpDeliversLo	1.3.6.1.4.1.18.3.4.34.2.2.1.55	Counter	read-only	Number of IP packets recieved, which are sent to the SSP for further processing - Lo Priority
CTR wfIfpStatsIpBlackHoleDrops	1.3.6.1.4.1.18.3.4.34.2.2.1.56	Counter	read-only	Total number of Packets Dropped as a result of the IP DA Lookup determining a next hop host that has yet been resolved.
CTR wfIfpStatsRspBypassSent	1.3.6.1.4.1.18.3.4.34.2.2.1.57	Counter	read-only	Number of outboud packets received which have the Bypass bit set in the descriptor (i.e. host originated traffic)
CTR wfIfpStatsDpiBoflsSent	1.3.6.1.4.1.18.3.4.34.2.2.1.58	Counter	read-only	Number of data path interconnect BOFL frames sent to the SSP
CTR wfIfpStatsSspRspQosTx	1.3.6.1.4.1.18.3.4.34.2.2.1.59	Counter	read-only	Number of SSP packets sent to RSP for delivery to the Network via the TX Qos Path
CTR wfIfpStatsSspRspBcastQosTx	1.3.6.1.4.1.18.3.4.34.2.2.1.60	Counter	read-only	Number of SSP packets sent to RSP for Broadcast delivery to the Network via the TX Qos Path
CTR wfIfpStatsCongCtrlClips	1.3.6.1.4.1.18.3.4.34.2.2.1.61	Counter	read-only	Total number of Packets Clipped by the Congestion Ctrl clip mechanism on this IFP CXP.
CTR wfIfpStatsCap0CrcInterrupts	1.3.6.1.4.1.18.3.4.34.2.2.1.62	Counter	read-only	Number of CRC interrupt indications on CAP0 DPI port
CTR wfIfpStatsSspCrcInterrupts	1.3.6.1.4.1.18.3.4.34.2.2.1.63	Counter	read-only	Number of CRC interrupt indications on SSP DPI port
CTR wfIfpStatsCap1CrcInterrupts	1.3.6.1.4.1.18.3.4.34.2.2.1.64	Counter	read-only	Number of CRC interrupt indications on CAP1 DPI port
CTR wfIfpStatsTpCrcInterrupts	1.3.6.1.4.1.18.3.4.34.2.2.1.65	Counter	read-only	Number of CRC interrupt indications on the Trunk DPI port
CTR wfIfpStatsMaxEofInterrupts	1.3.6.1.4.1.18.3.4.34.2.2.1.66	Counter	read-only	Total number of interrupt indications for frames received in excess of 7168 bytes
CTR wfIfpStats2kFlowControlInd	1.3.6.1.4.1.18.3.4.34.2.2.1.67	Counter	read-only	Total number of flow control indications received for the 2K buffer pool. This is essentially a count of the number of times the 2K buffer pool was depleted.
CTR wfIfpStats8kFlowControlInd	1.3.6.1.4.1.18.3.4.34.2.2.1.68	Counter	read-only	Total number of flow control indications received for the 8K buffer pool. This is essentially a count of the number of times the 8K buffer pool was depleted.
GAU wfIfpStatsPrimInputSlotMask	1.3.6.1.4.1.18.3.4.34.2.2.1.69	Gauge	read-only	Bit mask of primary input slots handled by this IFP driver.
GAU wfIfpStatsSecInputSlotMask	1.3.6.1.4.1.18.3.4.34.2.2.1.70	Gauge	read-only	Bit mask of secondary input slots handled by this IFP driver.
CTR wfIfpStatsSspLongFlowCtrl	1.3.6.1.4.1.18.3.4.34.2.2.1.71	Counter	read-only	Total number of Indications that the SSP Flow Control has been set for an long period of time.
CTR wfIfpStatsToSspRateCtrlClips	1.3.6.1.4.1.18.3.4.34.2.2.1.72	Counter	read-only	Total number of SSP destined Lo Priority Packets Clipped by RSP ToSSP Rate Control.
wfIfpDrvCongCfgTable	1.3.6.1.4.1.18.3.4.34.2.3		not-accessible	Internet Forwarding Processor (IFP) Congestion Table.
wfIfpDrvCongCfgEntry	1.3.6.1.4.1.18.3.4.34.2.3.1		not-accessible	An entry in the Congestion Table.
INT wfIfpDrvCongCfgDelete	1.3.6.1.4.1.18.3.4.34.2.3.1.1	INTEGER	read-write	Create/delete MIB instance parameter.
INT wfIfpDrvCongCfgIndex	1.3.6.1.4.1.18.3.4.34.2.3.1.2	INTEGER	read-only	Index of entry -- instance id.
INT wfIfpDrvCongCfgInternServClass	1.3.6.1.4.1.18.3.4.34.2.3.1.3	INTEGER	read-write	Internal Service Class parameter.
INT wfIfpDrvCongCfgDropPreference	1.3.6.1.4.1.18.3.4.34.2.3.1.4	INTEGER	read-write	Drop Preference parameter.
INT wfIfpDrvCongCfgWmDropThreshold	1.3.6.1.4.1.18.3.4.34.2.3.1.5	INTEGER	read-write	Watermark Drop Threshold parameter. Entries will be written to the internal congestion control table for all watermark values between 0 and wfIfpDrvCongCfgWmDropThreshold.

RFC description

Monitors Internet Forwarding Processor (IFP) configurations, buffer management, and queue parameters on Wellfleet devices.

Start monitoring Wellfleet Communications routers, legacy, later Bay Networks/Nortel (interface traffic-shaping/queuing config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-IFP-MIB

What Is Wellfleet-IFP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description