Wellfleet-IFP-MIB :: wfIfpDrvCfgLoPriQueRdEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Wellfleet-IFP-MIB › wfIfpDrvCfgLoPriQueRdEnable

wfIfpDrvCfgLoPriQueRdEnable

Module: Wellfleet-IFP-MIB

OID (symbolic): Wellfleet-IFP-MIB::wfIfpDrvCfgLoPriQueRdEnable

OID (numeric): 1.3.6.1.4.1.18.3.4.34.2.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Debug mode parameter enables reading and process of lo priority outbound queues. The queue enable is a bit mask [9:0] and is described as the following

Enable CAP1 0x00000001 Enable CAP2 0x00000002 Enable CAP3 0x00000004 Enable CAP4 0x00000008 Enable CAP5 0x00000010 Enable SSP0 0x00000020 Enable SSP1 0x00000040 Enable Atm0 0x00000080 Enable Atm1 0x00000100 Enable Mcast 0x00000200

Multiple queues can be enabled by oring the selected bits together

What is wfIfpDrvCfgLoPriQueRdEnable?

A bitmask debug control enabling the driver to read and process specific low-priority outbound queues (per CAP port, SSP, or ATM path); the bits can be OR'd together to enable several queues at once, and is normally left at its all-queues default outside of troubleshooting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.4.34.2.1.1.5
snmpwalk -v2c -c public <target> Wellfleet-IFP-MIB::wfIfpDrvCfgLoPriQueRdEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.4.34.2.1.1.5.1
snmpget -v2c -c public <target> Wellfleet-IFP-MIB::wfIfpDrvCfgLoPriQueRdEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.4.34.2.1.1.5.1 i <value>

Start monitoring Wellfleet Communications routers, legacy, later Bay Networks/Nortel (interface traffic-shaping/queuing config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-IFP-MIB::wfIfpDrvCfgLoPriQueRdEnable OID value, configure state conditions and alerts, and monitor any Wellfleet Communications routers, legacy, later Bay Networks/Nortel (interface traffic-shaping/queuing config status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.18wellfleetCMU-MIB
1.3.6.1.4.1.18.3wfSwSeries7Wellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.4wfLineWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.4.34wfDeviceCtlGroupWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.4.34.2wfIfpGroupWellfleet-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.18.3.4.34.2.1wfIfpDrvCfgTableWellfleet-IFP-MIB
1.3.6.1.4.1.18.3.4.34.2.1.1wfIfpDrvCfgEntryWellfleet-IFP-MIB
1.3.6.1.4.1.18.3.4.34.2.1.1.5wfIfpDrvCfgLoPriQueRdEnableWellfleet-IFP-MIB