WWP-LEOS-VLAN-TAG-MIB

All MIBs › WWP-LEOS-VLAN-TAG-MIB

Organization: Ciena, Inc

Last Updated: 2007-09-29

Category: Ciena LEOS Carrier Ethernet

Description: Manages Ciena LEOS VLAN tagging configuration including S-VLAN, C-VLAN, and Q-in-Q service mapping.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-LEOS-VLAN-TAG-MIB?

WWP-LEOS-VLAN-TAG-MIB is a World Wide Packets (later Ciena) LightningEdge/LEOS enterprise MIB that manages VLAN tagging behavior on carrier Ethernet access and aggregation devices, including provider-side S-VLAN and customer-side C-VLAN handling and Q-in-Q service mapping. It exposes both configuration objects for circuit control protocol handling per VLAN and traffic statistics counters tracking non-UNI octets at both the per-circuit and aggregate levels. Its monitoring value is mainly around software/service-level traffic accounting rather than physical hardware health: polling the non-UNI octet counters shows how much traffic is falling outside the expected UNI (user-network interface) profile, which can reveal misconfigured VLAN tagging or unexpected traffic classes traversing a service. It is a WWP/Ciena product-specific MIB with no explicit external MIB dependency called out, standing alongside other LEOS-prefixed MIBs that share the same device platform. It is deployed on WWP/Ciena LightningEdge carrier Ethernet switches used by service providers to deliver Ethernet access services, and a WWP-LEOS-VLAN-TAG-MIB download is a common prerequisite for provisioning per-circuit VLAN tagging monitoring on those platforms.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-VLAN-TAG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

WWP/Ciena LEOS-based carrier Ethernet switches

Monitoring Examples

A service provider engineer verifying a Q-in-Q service would inspect wwpLeosVlanCircuitCtrlProtocolTable to confirm the circuit's tagging/control-protocol handling is set correctly for that customer's S-VLAN/C-VLAN mapping. They would then poll wwpLeosVlanStatsNonUniOctets for that circuit and wwpLeosVlanTotalStatsNonUniOctets at the aggregate level to see whether non-UNI traffic volumes are within expected bounds. An unexpectedly high non-UNI octet count on a specific circuit, visible via wwpLeosVlanCircuitStats, would flag a VLAN tagging misconfiguration or leaking traffic on that service.

What Can Be Monitored

VLAN circuit control protocol settings
non-UNI traffic octets per circuit
aggregate non-UNI traffic octets
per-circuit VLAN statistics

Imported Objects

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From WWP-SMI

wwpModulesLeos

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpLeosVlanMIB	1.3.6.1.4.1.6141.2.60.5			This MIB module defines the managed objects for the VLAN, specific for the WWP products.
wwpLeosVlanMIBObjects	1.3.6.1.4.1.6141.2.60.5.1
wwpLeosVlan	1.3.6.1.4.1.6141.2.60.5.1.1
U32 wwpLeosMaxVlans	1.3.6.1.4.1.6141.2.60.5.1.1.1	Unsigned32	read-only	The maximum number of VLANs that this device supports.
U32 wwpLeosMaxSupportedVlanTagId	1.3.6.1.4.1.6141.2.60.5.1.1.2	Unsigned32	read-only	The maximum value of VLAN Tag ID that this device supports.
U32 wwpLeosNumVlans	1.3.6.1.4.1.6141.2.60.5.1.1.3	Unsigned32	read-only	The current number of VLANs that are configured in this device.
wwpLeosVlanTable	1.3.6.1.4.1.6141.2.60.5.1.1.4		not-accessible	The (conceptual) table listing the config parameters for the VLAN.
wwpLeosVlanEntry	1.3.6.1.4.1.6141.2.60.5.1.1.4.1		not-accessible	An entry (conceptual row) in the wwpLeosVlanTable.
VLA wwpLeosVlanId	1.3.6.1.4.1.6141.2.60.5.1.1.4.1.1	VlanId	read-only	A unique identifier for the VLAN.
OCT wwpLeosVlanName	1.3.6.1.4.1.6141.2.60.5.1.1.4.1.2	OCTET STRING	read-create	Name associated with this VLAN Entry.
ROW wwpLeosVlanStatus	1.3.6.1.4.1.6141.2.60.5.1.1.4.1.4	RowStatus	read-write	Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, there should not be any port/tag associated with this VLAN.
INT wwpLeosVlanMacLrnState	1.3.6.1.4.1.6141.2.60.5.1.1.4.1.5	INTEGER	read-write	Setting this object will enable or disable MAC learning for the VLAN.
INT wwpLeosVlanMacLrnOperState	1.3.6.1.4.1.6141.2.60.5.1.1.4.1.6	INTEGER	read-only	Displays the operational status of MAC learning for the VLAN.
INT wwpLeosVlanTranslationVlan	1.3.6.1.4.1.6141.2.60.5.1.1.4.1.7	INTEGER	read-write	The translated VLAN for the given ingress VLAN specified by wwpLeosVlanId. Setting this MIB object to 0 will result in unsetting the translation VLAN for given ingress VLAN wwpLeosVlanId.
INT wwpLeosVlanEgressTpid	1.3.6.1.4.1.6141.2.60.5.1.1.4.1.8	INTEGER	read-write	This object specifies the tpid used at egress for frames that egress a port on this vlan. This is used in conjunction with port egress tpid policy described in wwpLeosVplsVirtualCircuitEtherTypePolicy.
wwpLeosVlanTagMemberTable	1.3.6.1.4.1.6141.2.60.5.1.1.5		not-accessible	The (conceptual) table listing the configuration parameters for the members of the VLANs.
wwpLeosVlanTagMemberEntry	1.3.6.1.4.1.6141.2.60.5.1.1.5.1		not-accessible	An entry (conceptual row) in the wwpLeosVlanTagMemberTable.
INT wwpLeosVlanMemberPortId	1.3.6.1.4.1.6141.2.60.5.1.1.5.1.1	INTEGER	read-only	The port ID to be associated with this VLAN.
VLA wwpLeosVlanMemberTagId	1.3.6.1.4.1.6141.2.60.5.1.1.5.1.2	VlanTag	read-only	The VLAN Tag ID used by the port on this VLAN. If the switch is being used as a traditional Layer 2 device, then the value of wwpLeosVlanMemberTagId should be same as wwpLeosVlanMemberId.
ROW wwpLeosVlanMemberStatus	1.3.6.1.4.1.6141.2.60.5.1.1.5.1.4	RowStatus	read-create	Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'.
wwpLeosVlanCircuitTable	1.3.6.1.4.1.6141.2.60.5.1.1.6		not-accessible	The (conceptual) table listing the virtual circuit table.
wwpLeosVlanCircuitEntry	1.3.6.1.4.1.6141.2.60.5.1.1.6.1		not-accessible	The virtual circuit table entry indexed by virtual circuit index. To create an entry, use the SNMP multiple set operation because wwpLeosCircuitVlanId, wwpLeosCircuitName and wwpLeosCircuitType are mandatory while creating entry in the table.
INT wwpLeosCircuitIndex	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.1	INTEGER	read-only	This represents the virtual circuit index in the table.
VLA wwpLeosCircuitVlanId	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.2	VlanId	read-write	This represents the VLAN ID associated with virtual circuit index in the table.
INT wwpLeosCircuitType	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.3	INTEGER	read-write	This represents the type of virtual circuit eth or mpls.
OCT wwpLeosCircuitName	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.4	OCTET STRING	read-write	This represents the name associated with the virtual circuit.
INT wwpLeosCircuitPriority	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.5	INTEGER	read-write	This represents the 802.1D priority associated with the virtual circuit.
INT wwpLeosCircuitDataTunnelState	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.6	INTEGER	read-write	This represents the data tunnel state associated with the virtual circuit. Setting to 'on' enables the tunnel for data frames. Setting to 'off' disables it.
INT wwpLeosCircuitCtrlProtocolTunnelState	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.7	INTEGER	read-write	This represents the control frame tunnel state associated with the virtual circuit. Setting to 'on' enables the tunnel for control frames. Setting to 'off' disables it.
INT wwpLeosCircuitNumEndPoints	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.8	INTEGER	read-only	This represents the number of end points associated with this entry.
ROW wwpLeosCircuitStatus	1.3.6.1.4.1.6141.2.60.5.1.1.6.1.9	RowStatus	read-create	Setting this object to 'createAndGo' will create the entry and by default will enable control frame and data frame tunnel . Setting this object to 'destroy' will delete the entry from the table for given VLAN.
wwpLeosVlanCircuitPortExclusiveTable	1.3.6.1.4.1.6141.2.60.5.1.1.7		not-accessible	The (conceptual) table listing the layer 2 control frame tunnel status on a VLAN.
wwpLeosVlanCircuitPortExclusiveEntry	1.3.6.1.4.1.6141.2.60.5.1.1.7.1		not-accessible	The layer 2 control frame protocol tunnel entry for the VLAN.
INT wwpLeosPortId	1.3.6.1.4.1.6141.2.60.5.1.1.7.1.1	INTEGER	read-only	This specifies the port which is the end point for in this virtual circuit.
ROW wwpLeosPortExclusiveStatus	1.3.6.1.4.1.6141.2.60.5.1.1.7.1.2	RowStatus	read-create	Setting this object to 'createAndGo' will create the entry and designate the port as the end point of the virtual circuit. Setting this object to 'destroy' will delete the entry from the table for the given virtual circuit.
wwpLeosVlanCircuitCtrlProtocolTable	1.3.6.1.4.1.6141.2.60.5.1.1.8		not-accessible	The (conceptual) table listing the layer 2 control frame protocol status tunnel for a given VLAN.
wwpLeosVlanCircuitCtrlProtocolEntry	1.3.6.1.4.1.6141.2.60.5.1.1.8.1		not-accessible	The layer 2 control frame protocol tunnel entry for the VLAN.
INT wwpLeosVlanl2ProtocolNum	1.3.6.1.4.1.6141.2.60.5.1.1.8.1.1	INTEGER	read-only	This object represent the list of protocols supported by the device.
INT wwpLeosVlanl2Type	1.3.6.1.4.1.6141.2.60.5.1.1.8.1.2	INTEGER	read-create	Setting this object to 'discard' will cause wwpLeosProtocolNum frames arriving at the specified UNI to be discarded. Setting this to 'peer' will cause the wwpLeosProtocolNum frame to be processed by the provider network and cause the provider network to behave as a peer. Setting this to 'tunnel' will cause the wwpLeosProtocolNum frame to be tunneled.
wwpLeosVlanCircuitStats	1.3.6.1.4.1.6141.2.60.5.1.1.9
C32 wwpLeosVlanl2AllRxPkts	1.3.6.1.4.1.6141.2.60.5.1.1.9.1	Counter32	read-only	Specifies total number of packets ingressed on VLAN.
C32 wwpLeosVlanl2AllTunneledPkts	1.3.6.1.4.1.6141.2.60.5.1.1.9.2	Counter32	read-only	Specifies the total number of packets tunneled on the VLAN.
C32 wwpLeosVlanl2AllPeerPkts	1.3.6.1.4.1.6141.2.60.5.1.1.9.3	Counter32	read-only	Specifies the total number of packets peered on the VLAN.
C32 wwpLeosVlanl2AllDiscardedPkts	1.3.6.1.4.1.6141.2.60.5.1.1.9.4	Counter32	read-only	Specifies the total number of discarded packets on the VLAN.
C32 wwpLeosVlanl2AllDecodedPkts	1.3.6.1.4.1.6141.2.60.5.1.1.9.5	Counter32	read-only	Specifies the total number of packets tunneled and then restored on the VLAN.
C32 wwpLeosVlanl2AllDecodedFailures	1.3.6.1.4.1.6141.2.60.5.1.1.9.6	Counter32	read-only	Specifies the total number of packets failed to 'untunnel' on the VLAN.
C32 wwpLeosVlanl2AllTunneledSubcriberPortPkts	1.3.6.1.4.1.6141.2.60.5.1.1.9.7	Counter32	read-only	Specifies the total number of tunneled packets received on the subscriber port on the VLAN.
wwpLeosVlanCircuitProtocolStatsTable	1.3.6.1.4.1.6141.2.60.5.1.1.10		not-accessible	The (conceptual) table listing the layer 2 control frame protocol statistics for a given VLAN.
wwpLeosVlanCircuitProtocolStatsEntry	1.3.6.1.4.1.6141.2.60.5.1.1.10.1		not-accessible	The layer 2 control frame protocol statistics entry for the VLAN.
C32 wwpLeosVlanl2RxPkts	1.3.6.1.4.1.6141.2.60.5.1.1.10.1.1	Counter32	read-only	Specifies the number of packets ingressed matching the protocol.
C32 wwpLeosVlanl2TunneledPkts	1.3.6.1.4.1.6141.2.60.5.1.1.10.1.2	Counter32	read-only	Specifies the number of packets tunneled.
C32 wwpLeosVlanl2PeerPkts	1.3.6.1.4.1.6141.2.60.5.1.1.10.1.3	Counter32	read-only	Specifies the number of peered packets.
C32 wwpLeosVlanl2DiscardedPkts	1.3.6.1.4.1.6141.2.60.5.1.1.10.1.4	Counter32	read-only	Specifies the number of discarded packets.
C32 wwpLeosVlanl2DecodedPkts	1.3.6.1.4.1.6141.2.60.5.1.1.10.1.5	Counter32	read-only	Specifies the number of packets tunneled and then restored.
C32 wwpLeosVlanl2DecodedFailures	1.3.6.1.4.1.6141.2.60.5.1.1.10.1.6	Counter32	read-only	Specifies the number of packets failed to 'untunnel'.
C32 wwpLeosVlanl2TunneledSubcriberPortPkts	1.3.6.1.4.1.6141.2.60.5.1.1.10.1.7	Counter32	read-only	Specifies the number of tunneled packets received on the subscriber port.
wwpLeosVlanStatsTable	1.3.6.1.4.1.6141.2.60.5.1.1.11		not-accessible	A list of VLAN statistics entries.
wwpLeosVlanStatsEntry	1.3.6.1.4.1.6141.2.60.5.1.1.11.1		not-accessible	An entry in the VLAN stats table.
VLA wwpLeosVlanStatsVlanId	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.1	VlanTag	read-create	The VLAN ID for this statistics entry.
TIM wwpLeosVlanStatsCreateTime	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.2	TimeStamp	read-only	The value of sysUpTime when this control entry was last activated. This value can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
C64 wwpLeosVlanStatsUniOctets	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.3	Counter64	read-only	The number of unicast bytes through this VLAN.
C32 wwpLeosVlanStatsUniPkts	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.4	Counter32	read-only	The number of unicast packets through this VLAN.
C64 wwpLeosVlanStatsNonUniOctets	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.5	Counter64	read-only	The number of broadcast or multicast bytes through this VLAN.
C32 wwpLeosVlanStatsNonUniPkts	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.6	Counter32	read-only	The number of broadcast or multicast packets through this VLAN.
ROW wwpLeosVlanStatsStatus	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.7	RowStatus	read-write	Setting this object to 'createAndGo' will enable the collection of statistics on the specified VLAN, clear the initial statistics bucket and add the entry to the table. Setting this object to 'destroy' will disable the collection of statistics and remove the entry from the table for given VLAN.
T/F wwpLeosVlanStatsClear	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.8	TruthValue	read-write	Setting this object to True will reset the statistics of the given VLAN. Read on this object will always return False.
INT wwpLeosVlanStatsPortId	1.3.6.1.4.1.6141.2.60.5.1.1.11.1.9	INTEGER	read-write	The port ID to be associated with this VLAN statistics entry. When a portId is specified, VLAN statistics gathering is restricted to the specified port. A port ID of zero means no port restriction. Support for this object is currently not implemented.
wwpLeosVlanTotalStatsTable	1.3.6.1.4.1.6141.2.60.5.1.1.12		not-accessible	A list of VLAN statistics entries.
wwpLeosVlanTotalStatsEntry	1.3.6.1.4.1.6141.2.60.5.1.1.12.1		not-accessible	An entry in the VLAN statistics table.
VLA wwpLeosVlanTotalStatsVlanId	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.1	VlanTag	read-create	The VLAN ID for this statistics entry.
TIM wwpLeosVlanTotalStatsCreateTime	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.2	TimeStamp	read-only	The value of sysUpTime when this control entry was last activated. This value can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
C64 wwpLeosVlanTotalStatsUniOctets	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.3	Counter64	read-only	The number of unicast bytes through this VLAN.
C32 wwpLeosVlanTotalStatsUniPkts	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.4	Counter32	read-only	The number of unicast packets through this VLAN.
C64 wwpLeosVlanTotalStatsNonUniOctets	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.5	Counter64	read-only	The number of broadcast or multicast bytes through this VLAN.
C32 wwpLeosVlanTotalStatsNonUniPkts	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.6	Counter32	read-only	The number of broadcast or multicast packets through this VLAN.
ROW wwpLeosVlanTotalStatsStatus	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.7	RowStatus	read-write	Setting this object to 'createAndGo' will enable the collection of statistics on the specified VLAN, clear the initial statistics bucket and add the entry to the table. Setting this object to 'destroy' will disable the collection of statistics and remove the entry from the table for given VLAN.
T/F wwpLeosVlanTotalStatsClear	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.8	TruthValue	read-write	Setting this object to True resets the statistics of the given VLAN. Read on this object will always return False.
INT wwpLeosVlanTotalStatsPortId	1.3.6.1.4.1.6141.2.60.5.1.1.12.1.9	INTEGER	read-write	The port ID to be associated with this VLAN statistics entry. When a portId is specified, the VLAN statistics gathering is restricted to the specified port. A port ID of zero means no port restriction. Support for this object is currently not implemented.
wwpLeosVlanTranslationTable	1.3.6.1.4.1.6141.2.60.5.1.1.13		not-accessible	VLAN translation table.
wwpLeosVlanTranslationEntry	1.3.6.1.4.1.6141.2.60.5.1.1.13.1		not-accessible	An entry in the VLAN translation table.
INT wwpLeosVlanTranslationPgId	1.3.6.1.4.1.6141.2.60.5.1.1.13.1.1	INTEGER	not-accessible	Logical port interface for which the translation applies.
VLA wwpLeosVlanTranslationFrameVid	1.3.6.1.4.1.6141.2.60.5.1.1.13.1.2	VlanTag	not-accessible	Frame Ingres-egress vlan-id.
VLA wwpLeosVlanTranslationVlanId	1.3.6.1.4.1.6141.2.60.5.1.1.13.1.3	VlanTag	read-create	Assign/stamp to this internal VLAN.
ROW wwpLeosVlanTranslationStatus	1.3.6.1.4.1.6141.2.60.5.1.1.13.1.4	RowStatus	read-create	Setting this object to CreateAndGo will create a VLAn tranlsation entry. Setting this object to destroy will delete a translation entry.
wwpLeosVlanEPR	1.3.6.1.4.1.6141.2.60.5.1.2
wwpLeosVlanEPRTable	1.3.6.1.4.1.6141.2.60.5.1.2.1		not-accessible	The (conceptual) table listing the egress port restriction parameters for the VLAN.
wwpLeosVlanEPREntry	1.3.6.1.4.1.6141.2.60.5.1.2.1.1		not-accessible	The egress port restriction entry for a VLAN.
INT wwpLeosVlanEPRState	1.3.6.1.4.1.6141.2.60.5.1.2.1.1.1	INTEGER	read-write	Setting this object to 'enable' will enable the egress port restriction on this VLAN. Setting this object to 'disable' will disable the egress port restriction on this VLAN.
wwpLeosVlanEPRGrpMemTable	1.3.6.1.4.1.6141.2.60.5.1.2.2		not-accessible	The (conceptual) table listing the egress port restriction group for the VLAN members.
wwpLeosVlanEPRGrpMemEntry	1.3.6.1.4.1.6141.2.60.5.1.2.2.1		not-accessible	The egress port restriction group entry for the VLAN members.
INT wwpLeosVlanEPRGrpName	1.3.6.1.4.1.6141.2.60.5.1.2.2.1.1	INTEGER	read-write	Setting this object will assign the specified group to the given port-tag-vlan combination.
wwpLeosVlanEPRGrpAccessTable	1.3.6.1.4.1.6141.2.60.5.1.2.3		not-accessible	The (conceptual) table listing the group access for the given VLAN.
wwpLeosVlanEPRGrpAccessEntry	1.3.6.1.4.1.6141.2.60.5.1.2.3.1		not-accessible	Entry for the group access for the given VLAN.
INT wwpLeosVlanEPRGrpAAccess	1.3.6.1.4.1.6141.2.60.5.1.2.3.1.1	INTEGER	read-write	Setting this object will allow group A members for this VLAN to talk to specified group.
INT wwpLeosVlanEPRGrpBAccess	1.3.6.1.4.1.6141.2.60.5.1.2.3.1.2	INTEGER	read-write	Setting this object will allow group B members for this VLAN to talk to specified group.
wwpLeosVlanMIBNotificationPrefix	1.3.6.1.4.1.6141.2.60.5.2
wwpLeosVlanMIBNotifications	1.3.6.1.4.1.6141.2.60.5.2.0
wwpLeosVlanMIBConformance	1.3.6.1.4.1.6141.2.60.5.3
wwpLeosVlanMIBCompliances	1.3.6.1.4.1.6141.2.60.5.3.1
wwpLeosVlanMIBGroups	1.3.6.1.4.1.6141.2.60.5.3.2

RFC description

Manages VLAN configuration and statistics for Ciena WWP LEOS optical networking products.

Start monitoring WWP/Ciena LEOS-based carrier Ethernet switches (S-VLAN/C-VLAN tagging and non-UNI traffic-counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-LEOS-VLAN-TAG-MIB

What Is WWP-LEOS-VLAN-TAG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description