WWP-LEOS-USER-MIB

All MIBs › WWP-LEOS-USER-MIB

Organization: Ciena, Inc

Last Updated: 2012-07-11

Category: Ciena LEOS Carrier Ethernet

Description: Governs the local user account database on Ciena LEOS devices, including password policies and privilege level assignments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-LEOS-USER-MIB?

WWP-LEOS-USER-MIB is a World Wide Packets (later acquired by Ciena, LEOS operating system) enterprise MIB for managing local user accounts on the device. It exposes configuration-oriented data such as the local user database, password policy settings, and privilege/access level assignments for each account. Its role in device monitoring is administrative rather than hardware-health related: it lets an operator confirm which accounts exist, what privilege level they hold, and whether password policy requirements (such as complexity or aging) are enforced, which is useful for auditing device access control and detecting unauthorized or misconfigured accounts. It is a self-contained, vendor-specific module with no strong dependency on other standard MIBs beyond basic SNMPv2-SMI conventions. It is typically deployed on Ciena LEOS-based Ethernet access and aggregation switches where centralized visibility into local login accounts is needed alongside AAA/RADIUS integration. Engineers can download the WWP-LEOS-USER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-USER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena/World Wide Packets LEOS-based Ethernet access switches

Monitoring Examples

No object/table names were provided in the source for this module, so a concrete polling example cannot be grounded in real identifiers; in general terms, an operator would expect a user table keyed by username exposing privilege level and password-policy state, polled to confirm that only authorized accounts with the correct privilege level exist on the device and to detect any unexpected new or elevated accounts.

What Can Be Monitored

local user accounts
user privilege/access level
password policy settings
account configuration status

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

From WWP-SMI

wwpModulesLeos

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpLeosUserMIB	1.3.6.1.4.1.6141.2.60.39			This MIB module defines the generic managed objects for User Information on WWP devices.
wwpLeosUserMIBObjects	1.3.6.1.4.1.6141.2.60.39.1
wwpLeosUser	1.3.6.1.4.1.6141.2.60.39.1.1
wwpLeosUserAuthProviderTable	1.3.6.1.4.1.6141.2.60.39.1.1.1		not-accessible	Table of UserAuth Providers.
wwpLeosUserAuthProviderEntry	1.3.6.1.4.1.6141.2.60.39.1.1.1.1		not-accessible	An entry for each User Authorization Provider.
I32 wwpLeosUserAuthProviderPriority	1.3.6.1.4.1.6141.2.60.39.1.1.1.1.1	Integer32	not-accessible	The priority of this user authentication provider.
INT wwpLeosUserAuthProviderType	1.3.6.1.4.1.6141.2.60.39.1.1.1.1.2	INTEGER	read-write	The type/method of this user authentication provider. At least one entry must be a provider other than 'none' and any given provider may not be used twice. When a provider is changed to 'none', lower priority providers will have their priority increased to close the gap.
U32 wwpLeosUserAuthProviderCalled	1.3.6.1.4.1.6141.2.60.39.1.1.1.1.3	Unsigned32	read-write	The number of calls to this user authentication provider. The counter is cleared automatically when AuthProviderType is changed or may be cleared manually.
U32 wwpLeosUserAuthProviderSuccess	1.3.6.1.4.1.6141.2.60.39.1.1.1.1.4	Unsigned32	read-write	The number of times this user authentication provider returned a Success response. The counter is cleared automatically when AuthProviderType is changed or may be cleared manually.
U32 wwpLeosUserAuthProviderFailure	1.3.6.1.4.1.6141.2.60.39.1.1.1.1.5	Unsigned32	read-write	The number of times this user authentication provider returned a Failure response. The counter is cleared automatically when AuthProviderType is changed or may be cleared manually.
U32 wwpLeosUserAuthProviderSkipped	1.3.6.1.4.1.6141.2.60.39.1.1.1.1.6	Unsigned32	read-write	The number of times this user authentication provider returned a Skip Me response. The counter is cleared automatically when AuthProviderType is changed or may be cleared manually.
INT wwpLeosUserAuthProviderScope	1.3.6.1.4.1.6141.2.60.39.1.1.1.1.7	INTEGER	read-write	The scope to be used for each authentication method.
wwpLeosUserWhoTable	1.3.6.1.4.1.6141.2.60.39.1.1.2		not-accessible	Table of logged in users.
wwpLeosUserWhoEntry	1.3.6.1.4.1.6141.2.60.39.1.1.2.1		not-accessible	An entry for each logged in user.
U32 wwpLeosUserWhoPid	1.3.6.1.4.1.6141.2.60.39.1.1.2.1.1	Unsigned32	not-accessible	The pid of the users shell process.
STR wwpLeosUserWhoUser	1.3.6.1.4.1.6141.2.60.39.1.1.2.1.2	DisplayString	read-only	The username used during login authentication.
STR wwpLeosUserWhoTerminal	1.3.6.1.4.1.6141.2.60.39.1.1.2.1.3	DisplayString	read-only	The terminal the user logged in from.
C32 wwpLeosUserWhoIdleTime	1.3.6.1.4.1.6141.2.60.39.1.1.2.1.4	Counter32	read-only	The users idle time in minutes. This counter is reset to zero when ever the shell process detects input from the user.
ROW wwpLeosUserWhoStatus	1.3.6.1.4.1.6141.2.60.39.1.1.2.1.5	RowStatus	read-write	Status of the users shell process. To kill a users shell, set this object to 'Destroy'.
wwpLeosUserTable	1.3.6.1.4.1.6141.2.60.39.1.1.3		not-accessible	Table of locally configured users.
wwpLeosUserEntry	1.3.6.1.4.1.6141.2.60.39.1.1.3.1		not-accessible	An entry for each user in the local password file.
U32 wwpLeosUserUid	1.3.6.1.4.1.6141.2.60.39.1.1.3.1.1	Unsigned32	not-accessible	The numeric userid of the user. These numbers are generated by the device in order to making indexing the table easy, but they are not tied to specific user names during a reboot. When a new user is created, the userid must be an unused value.
STR wwpLeosUserName	1.3.6.1.4.1.6141.2.60.39.1.1.3.1.2	DisplayString	read-create	The name of the user.
STR wwpLeosUserPassword	1.3.6.1.4.1.6141.2.60.39.1.1.3.1.3	DisplayString	read-create	The users password in encrypted form. When setting this object you must set wwpLeosUserIsEncrypted at the same time in order to specify whether the password you are setting needs to be encrypted by the device or whether you have already encrypted it.
INT wwpLeosUserPrivLevel	1.3.6.1.4.1.6141.2.60.39.1.1.3.1.4	INTEGER	read-create	The privilege level of the user.
T/F wwpLeosUserIsDefault	1.3.6.1.4.1.6141.2.60.39.1.1.3.1.5	TruthValue	read-only	When this is set to True, the user is one of the default users created in the device at boot time.
T/F wwpLeosUserIsEncrypted	1.3.6.1.4.1.6141.2.60.39.1.1.3.1.6	TruthValue	read-create	This will always be True on a Get as the password is always stored locally on the device in encrypted form. During a Set, it is False if you are sending wwpLeosUserPassword in the clear so the device can encrypt it, or True if wwpLeosUserPassword is already in encrypted MD5 form.
T/F wwpLeosUserIsModified	1.3.6.1.4.1.6141.2.60.39.1.1.3.1.7	TruthValue	read-only	When this is set to True, the user is one of the default users created in the device, but one or more properties of the user account has been altered from the default values.
ROW wwpLeosUserStatus	1.3.6.1.4.1.6141.2.60.39.1.1.3.1.8	RowStatus	read-create	Use CreateAndGo to create a new user, Destroy to remove a user.
wwpLeosUserMIBNotificationPrefix	1.3.6.1.4.1.6141.2.60.39.2
wwpLeosUserMIBNotifications	1.3.6.1.4.1.6141.2.60.39.2.0
wwpLeosUserMIBConformance	1.3.6.1.4.1.6141.2.60.39.3
wwpLeosUserMIBCompliances	1.3.6.1.4.1.6141.2.60.39.3.1
wwpLeosUserMIBGroups	1.3.6.1.4.1.6141.2.60.39.3.2

RFC description

Manages Ciena LEOS local user account database, password policies, and privilege level assignments.

Start monitoring Ciena/World Wide Packets LEOS-based Ethernet access switches (local user-account/privilege config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-LEOS-USER-MIB

What Is WWP-LEOS-USER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description