| OID symbolic | OID numeric | Type | Access | Description |
| wwpLeosRstpMIB | 1.3.6.1.4.1.6141.2.60.13 | | | Deprecated wwpLeosRstpPvstBpduReceivedNotification. |
| wwpLeosRstpMIBObjects | 1.3.6.1.4.1.6141.2.60.13.1 | | | |
| wwpLeosRstpDomain | 1.3.6.1.4.1.6141.2.60.13.1.1 | | | |
| INT wwpLeosRstpMode | 1.3.6.1.4.1.6141.2.60.13.1.1.1 | INTEGER | read-write | This object sets the mode to rstp, domain, or mstp mode.
If the selected mode is not supported by the device, an
SNMP error will be returned and the value of this object
will remain unchanged. |
| wwpLeosRstpDomainTable | 1.3.6.1.4.1.6141.2.60.13.1.1.2 | | not-accessible | Table of Rstp Domain. |
| wwpLeosRstpDomainEntry | 1.3.6.1.4.1.6141.2.60.13.1.1.2.1 | | not-accessible | Rstp domain entry in the rstp domain table. |
| INT wwpLeosRstpDomainId | 1.3.6.1.4.1.6141.2.60.13.1.1.2.1.1 | INTEGER | read-only | Domain Id used as an index in the rstp domain. Domain id starts at 0. |
| STR wwpLeosRstpDomainName | 1.3.6.1.4.1.6141.2.60.13.1.1.2.1.2 | DisplayString | read-create | The name of the domain. |
| ROW wwpLeosRstpDomainStatus | 1.3.6.1.4.1.6141.2.60.13.1.1.2.1.3 | RowStatus | read-create | To create a row in this table, the snmp manager must
set this object to 'createAndGo'. To delete the entry
set it to delete. |
| wwpLeosRstpDomainMemTable | 1.3.6.1.4.1.6141.2.60.13.1.1.3 | | not-accessible | Table of Rstp Domain. |
| wwpLeosRstpDomainMemEntry | 1.3.6.1.4.1.6141.2.60.13.1.1.3.1 | | not-accessible | Rstp domain member entry. |
| INT wwpLeosRstpDomainPortId | 1.3.6.1.4.1.6141.2.60.13.1.1.3.1.1 | INTEGER | read-only | Port ID for the instance. Port ID's start at 1,
and may not be consecutive for each additional port.
This port Id should refer to the dot1dBasePort in the
Dot1dBasePortEntry. |
| ROW wwpLeosRstpDomainMemStatus | 1.3.6.1.4.1.6141.2.60.13.1.1.3.1.2 | RowStatus | read-create | To add a port to the domain create a row in this table,
by setting this object to 'createAndGo'. To remove the port
from the domain set this object to delete. |
| wwpLeosRstpBridgeDomainAttrs | 1.3.6.1.4.1.6141.2.60.13.1.1.4 | | | |
| INT wwpLeosRstpDomainAttrsForceVer | 1.3.6.1.4.1.6141.2.60.13.1.1.4.1 | INTEGER | read-only | This attribute specifies the domain version to rstp or stp. |
| INT wwpLeosRstpDomainAttrsForwardDelay | 1.3.6.1.4.1.6141.2.60.13.1.1.4.2 | INTEGER | read-write | This attribute specifies the forward delay for rstp domain. |
| INT wwpLeosRstpDomainAttrsHelloTime | 1.3.6.1.4.1.6141.2.60.13.1.1.4.3 | INTEGER | read-write | This attribute specifies the hello time for the rstp domain. |
| INT wwpLeosRstpDomainAttrsLoopBackBlock | 1.3.6.1.4.1.6141.2.60.13.1.1.4.4 | INTEGER | read-write | This object specifies if loopback port blocking feature is
enabled/disabled. |
| INT wwpLeosRstpDomainAttrsMaxAge | 1.3.6.1.4.1.6141.2.60.13.1.1.4.5 | INTEGER | read-write | This object specifies the max age time for the rstp domain. |
| INT wwpLeosRstpDomainAttrsPathCostDef | 1.3.6.1.4.1.6141.2.60.13.1.1.4.6 | INTEGER | read-write | This object specifies the path cost. if it is 1 then it is 8021d
else it is 8021t. |
| INT wwpLeosRstpDomainAttrsPriority | 1.3.6.1.4.1.6141.2.60.13.1.1.4.7 | INTEGER | read-write | Setting this object will set the rstp domain priority. |
| INT wwpLeosRstpDomainAttrsTxHoldCount | 1.3.6.1.4.1.6141.2.60.13.1.1.4.8 | INTEGER | read-write | This object specifies the tx hold count for a domain. |
| wwpLeosRstpDomainAttrTable | 1.3.6.1.4.1.6141.2.60.13.1.1.5 | | not-accessible | Table of each Rstp Domain. |
| wwpLeosRstpDomainAttrEntry | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1 | | not-accessible | Rstp domain attributes entry. |
| INT wwpLeosRstpDomainAttrDesignatedBridgePri | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.1 | INTEGER | read-only | This attribute specifies the designated bridge priority for specified domain.
This attribute represents the first two octets of the (8 octet
long) designated bridge ID. The writable portion of these two octets is the first 3 bits
starting from least significant bit. |
| MAC wwpLeosRstpDomainAttrDesignatedBridgeMac | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.2 | MacAddress | read-only | This attribute specifies the designated bridge mac address for specified domain. |
| INT wwpLeosRstpDomainAttrDesignatedRootPri | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.3 | INTEGER | read-only | This attribute specifies the designated root priority for specified domain.
This attribute represents the first two octets of the (8 octet
long) designated root bridge ID. The writable portion of these two octets
is the first 3 bits starting from least significant bit. |
| MAC wwpLeosRstpDomainAttrDesignatedRootMac | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.4 | MacAddress | read-only | This attribute specifies the designated root mac address for specified domain. |
| INT wwpLeosRstpDomainAttrRootCost | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.5 | INTEGER | read-only | This attribute specifies the root cost for specified domain. |
| INT wwpLeosRstpDomainAttrRootPort | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.6 | INTEGER | read-only | This attribute specifies the designated port for specified domain. |
| INT wwpLeosRstpDomainAttrMaxAge | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.7 | INTEGER | read-only | This attribute specifies the max age for specified domain. |
| INT wwpLeosRstpDomainAttrHelloTime | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.8 | INTEGER | read-only | This attribute specifies the hello time for specified domain. |
| INT wwpLeosRstpDomainAttrHoldTime | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.9 | INTEGER | read-only | This attribute specifies the hold time for specified domain. |
| INT wwpLeosRstpDomainAttrForwardDelay | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.10 | INTEGER | read-only | This attribute specifies the forward delay for specified domain. |
| INT wwpLeosRstpDomainAttrPriority | 1.3.6.1.4.1.6141.2.60.13.1.1.5.1.11 | INTEGER | read-write | This attribute specifies the domain priority for given domain. |
| INT wwpLeosRstpMaxAgeEventInterval | 1.3.6.1.4.1.6141.2.60.13.1.1.6 | INTEGER | read-write | This object defines how often the events relating to
Max Age BPDU's being Sent or Received will be generated.
It is the number of seconds that must pass between events. |
| wwpLeosRstpPortExt | 1.3.6.1.4.1.6141.2.60.13.1.2 | | | |
| wwpLeosRstpPortInfoTable | 1.3.6.1.4.1.6141.2.60.13.1.2.1 | | not-accessible | Table that contains additional information about each port.
This table is extension of dot1dStpPortTable. |
| wwpLeosRstpPortInfoEntry | 1.3.6.1.4.1.6141.2.60.13.1.2.1.1 | | not-accessible | Rstp port information entry. |
| INT wwpLeosRstpPortId | 1.3.6.1.4.1.6141.2.60.13.1.2.1.1.1 | INTEGER | read-only | This is the port num used as index in the table. Value of this port id is same
as dot1dStpPort. |
| MAC wwpLeosRstpPortDesiginatedId | 1.3.6.1.4.1.6141.2.60.13.1.2.1.1.2 | MacAddress | read-only | This attribute specifies the designated id for the given port. |
| OCT wwpLeosRstpPortDesiginatedPid | 1.3.6.1.4.1.6141.2.60.13.1.2.1.1.3 | OCTET STRING | read-only | This attribute specifies the designated id for the given port. |
| wwpLeosRstpLocalPortExt | 1.3.6.1.4.1.6141.2.60.13.1.3 | | | |
| wwpLeosRstpLocalPortInfoTable | 1.3.6.1.4.1.6141.2.60.13.1.3.1 | | not-accessible | Table that contains additional local information about
each port. This table is also extension of dot1dStpPortTable. |
| wwpLeosRstpLocalPortInfoEntry | 1.3.6.1.4.1.6141.2.60.13.1.3.1.1 | | not-accessible | Rstp local port information entry. |
| INT wwpLeosRstpPortDynPathCostState | 1.3.6.1.4.1.6141.2.60.13.1.3.1.1.1 | INTEGER | read-write | This attribute enable | disable dynamic path cost for the given port.
Before setting dot1dStpPortPathCost user must set
wwpLeosRstpPortDynPathCostState = disabled. |
| wwpLeosRstpMIBNotificationPrefix | 1.3.6.1.4.1.6141.2.60.13.2 | | | |
| wwpLeosRstpMIBNotifications | 1.3.6.1.4.1.6141.2.60.13.2.0 | | | |
| NTF wwpLeosRstpPortBackupNotification | 1.3.6.1.4.1.6141.2.60.13.2.0.1 | | | A wwpLeosRstpPortBackupNotification is sent whenever
device detects self loop i.e. same cable connected to
two ports on the same device. |
| NTF wwpLeosRstpPvstBpduReceivedNotification | 1.3.6.1.4.1.6141.2.60.13.2.0.2 | | | A wwpLeosRstpPvstBpduReceivedNotification is sent whenever
PVST BPDU is received on the port. This trap is sent out
every minute. |
| NTF wwpLeosRstpSelfLoopNotification | 1.3.6.1.4.1.6141.2.60.13.2.0.3 | | | A wwpLeosRstpSelfLoopNotification is sent whenever
device detects same cable connected to a port in a loop back.
Also if loop-back blocking is enabled on the device then
rstp will block this port (self disable). |
| NTF wwpLeosRstpPortOperEdgeNotification | 1.3.6.1.4.1.6141.2.60.13.2.0.4 | | | A wwpLeosRstpPortOperEdgeNotification trap is sent whenever
device detects a port Rstp OperEdge change. |
| NTF wwpLeosRstpPortFlapNotification | 1.3.6.1.4.1.6141.2.60.13.2.0.5 | | | A wwpLeosRstpPortFlapNotification trap is sent whenever
device detects a port flapping.
Trap is generated under following criteria.
If device detects port flapped more than once within 1 minute timer period and
it has not sent trap within last 5 minutes then it will generate this trap. |
| NTF wwpLeosRstpBridgeRootPortLostNotification | 1.3.6.1.4.1.6141.2.60.13.2.0.6 | | | A wwpLeosRstpBridgeRootPortLostNotification trap is sent whenever
device detects that bridge root port is lost.
This trap will indicate either the link failure or link partner RSTP disabled. |
| wwpLeosRstpMIBConformance | 1.3.6.1.4.1.6141.2.60.13.3 | | | |
| wwpLeosRstpMIBCompliances | 1.3.6.1.4.1.6141.2.60.13.3.1 | | | |
| wwpLeosRstpMIBGroups | 1.3.6.1.4.1.6141.2.60.13.3.2 | | | |