| OID symbolic | OID numeric | Type | Access | Description |
|---|
| wwpLeosRsvpteMIB | 1.3.6.1.4.1.6141.2.60.30 | | | Added new objects wwpLeosRsvpteIfHelloInterval,wwpLeosRsvpteIfHelloTolerance,
wwpLeosRsvpteIfAdvertisedLabel. |
| wwpLeosRsvpteMIBObjects | 1.3.6.1.4.1.6141.2.60.30.1 | | | |
| wwpLeosRsvpteObjects | 1.3.6.1.4.1.6141.2.60.30.1.1 | | | |
| INT wwpLeosRsvpteAdminStatus | 1.3.6.1.4.1.6141.2.60.30.1.1.1 | INTEGER | read-write | The desired administrative state of RSVP-TE. |
| INT wwpLeosRsvpteOperStatus | 1.3.6.1.4.1.6141.2.60.30.1.1.2 | INTEGER | read-only | The current operational state of RSVP-TE. |
| U32 wwpLeosRsvpteRetryInterval | 1.3.6.1.4.1.6141.2.60.30.1.1.3 | Unsigned32 | read-write | The persistent tunnel retry interval.
This is the interval between the first failure of a persistent
tunnel and the first attempt to re-establish the tunnel.
This cannot be changed while admin status is enable or oper status is up |
| INT wwpLeosRsvpteRetryInfiniteState | 1.3.6.1.4.1.6141.2.60.30.1.1.4 | INTEGER | read-write | The persistent tunnel retry infinity.
This is the State which when on will trigger RSVP-TE to try to restore the tunnels
infinite times. This object can only be set if RSVP-TE is globally disabled. |
| INT wwpLeosRsvpteRetryMax | 1.3.6.1.4.1.6141.2.60.30.1.1.5 | INTEGER | read-only | The maximum number of retry attempts that will be made before a
persistent tunnel is deemed inoperable. Once in this state,
a management agent should set mplsTunnelAdminStatus to 'up' to
attempt to reestablish the tunnel.
This field is not used when wwpLeosRsvpteRetryInfiniteState is on |
| I32 wwpLeosRsvpteRefreshInterval | 1.3.6.1.4.1.6141.2.60.30.1.1.6 | Integer32 | read-only | This RSVP-TE value, R, which is used to set the average
interval between refresh path and resv messages. |
| I32 wwpLeosRsvpteRefreshMultiple | 1.3.6.1.4.1.6141.2.60.30.1.1.7 | Integer32 | read-only | The RSVP-TE value, K, which is the number of unresponded Path
or Resv refresh attempts which must be made, spaced by
the refresh interval before the state is deemed to have
timed out. |
| I32 wwpLeosRsvpteRfrshSlewDenom | 1.3.6.1.4.1.6141.2.60.30.1.1.8 | Integer32 | read-only | The denominator of the fraction, SlewMax, which is the
maximum allowable increase in the refresh interval, R, to
prevent state timeout while changing R. R is increased by
this fraction until it reaches the new desired value. |
| I32 wwpLeosRsvpteRfrshSlewNumerator | 1.3.6.1.4.1.6141.2.60.30.1.1.9 | Integer32 | read-only | The numerator of the fraction, SlewMax, which is the maximum
allowable increase in the refresh interval, R, to prevent
state timeout while changing R. R is increased by this
fraction until it reaches the new desired value. |
| I32 wwpLeosRsvpteBlockadeMultiple | 1.3.6.1.4.1.6141.2.60.30.1.1.10 | Integer32 | read-only | The RSVP-TE value, Kb, which is the number of refresh timeout
periods after which blockade state is deleted. |
| I32 wwpLeosRsvpteLSPSetupPriority | 1.3.6.1.4.1.6141.2.60.30.1.1.11 | Integer32 | read-only | The setup priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically more or equal (so lower or equal priority)
than the value of the holding priority object. |
| I32 wwpLeosRsvpteLSPHoldingPriority | 1.3.6.1.4.1.6141.2.60.30.1.1.12 | Integer32 | read-only | The holding priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically less or equal (so higher or equal priority)
than the value of the holding priority object. |
| T/F wwpLeosRsvpteUseHopByHop | 1.3.6.1.4.1.6141.2.60.30.1.1.13 | TruthValue | read-only | A flag to indicate that RSVP-TE should use the hop by hop
addressing scheme for PATH and PATH-TEAR messages it
sends. If set then the IP addresses used in the IP header
of PATH messages forwarded by RSVP-TE set source as the
local outgoing interface IP address, and destination as
the next hop router IP address. |
| T/F wwpLeosRsvpteRestartCapable | 1.3.6.1.4.1.6141.2.60.30.1.1.14 | TruthValue | read-only | A flag to indicate whether the local node should advertise
itself as restart capable. |
| U32 wwpLeosRsvpteRestartTime | 1.3.6.1.4.1.6141.2.60.30.1.1.15 | Unsigned32 | read-only | The time in milliseconds that the local node takes to
restart RSVP-TE and the communication channel used for
RSVP-TE communication. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
Only used if wwpLeosRsvpteRestartCapable is set to true. |
| U32 wwpLeosRsvpteRecoveryTime | 1.3.6.1.4.1.6141.2.60.30.1.1.16 | Unsigned32 | read-only | The period of time in milliseconds that the local node
would like neighbors to take to resyncronize RSVP-TE and
MPLS forwarding information after the re-establishment of
Hello connectivity. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
A value of zero indicates that the node does not support
resynchronization following failure of the local node.
A value of 0xFFFFFFFF indicates an infinite recovery time.
Only used if wwpLeosRsvpteRestartCapable is set to true. |
| I32 wwpLeosRsvpteMinPeerRestart | 1.3.6.1.4.1.6141.2.60.30.1.1.17 | Integer32 | read-only | The mininum period of time in milliseconds that RSVP-TE
should wait for a restart capable neighbor to regain
Hello connectivity before invoking procedures related to
communication loss.
RSVP-TE will wait for the maximum of this time and the
restart_time advertised in the RESTART_CAP object in Hello
messages from the neighbor. |
| wwpLeosRsvpte | 1.3.6.1.4.1.6141.2.60.30.1.2 | | | |
| wwpLeosRsvpteIfTable | 1.3.6.1.4.1.6141.2.60.30.1.2.1 | | not-accessible | A table of interfaces that RSVP-TE can be enabled on. |
| wwpLeosRsvpteIfEntry | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1 | | not-accessible | WWP Descr. |
| STR wwpLeosRsvpteIfName | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.1 | DisplayString | read-only | Interface Name |
| INT wwpLeosRsvpteIfIndex | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.2 | INTEGER | not-accessible | Interface Index |
| IP wwpLeosRsvpteIfIpAddr | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.3 | IpAddress | read-only | Interface IP Address |
| INT wwpLeosRsvpteIfMtu | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.4 | INTEGER | read-write | RSVP-TE Interface MTU |
| INT wwpLeosRsvpteIfAdminStatus | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.5 | INTEGER | read-write | Desired RSVP-TE status on this Interface |
| INT wwpLeosRsvpteIfOperStatus | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.6 | INTEGER | read-only | RSVP-TE Operational Status on this Interface |
| U32 wwpLeosRsvpteIfHelloInterval | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.7 | Unsigned32 | read-write | RSVP-TE hello message interval. |
| U32 wwpLeosRsvpteIfHelloTolerance | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.8 | Unsigned32 | read-write | RSVP-TE hello tolerance defines number of hello interval which may pass without receiving a
successful Hello message from a partner before the Hello session times out. |
| ADV wwpLeosRsvpteIfAdvertisedLabel | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.9 | AdvertisedLabel | read-write | This attribute decides what kind of a Label will be advertised by RSVP-TE for a
Label Request received on this L3 Interface |
