WWP-LEOS-RMON-MIB

All MIBs › WWP-LEOS-RMON-MIB

Organization: Ciena, Inc

Last Updated: 2012-06-27

Category: Ciena LEOS Carrier Ethernet

Description: Manages Ciena LEOS RMON statistics collection, history groups, alarm thresholds, and event configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-LEOS-RMON-MIB?

WWP-LEOS-RMON-MIB is a Ciena LEOS (formerly World Wide Packets) proprietary MIB providing vendor-specific Remote Network Monitoring (RMON) configuration, covering statistics collection, history groups, alarm thresholds, and event configuration on the device. It exposes both configuration data (which counters to collect, alarm threshold definitions, history sampling intervals) and the resulting performance/statistics data collected against those definitions. Its monitoring value is central to performance and fault detection: RMON alarms trigger events when a monitored counter (e.g., error rate or utilization) crosses a configured threshold, giving early warning of degrading interface or network health. It mirrors the structure of the standard IETF RMON MIB (RFC 2819) but is implemented as a proprietary module rather than reusing it directly. It is deployed on Ciena LEOS Metro Ethernet devices where operators want threshold-based alerting on traffic statistics without relying on the standard RMON MIB. Engineers can download the WWP-LEOS-RMON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-RMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena LEOS / World Wide Packets Metro Ethernet device

Monitoring Examples

No sample object names were supplied for this module; based on the description, the relevant objects would be an alarm configuration table (threshold, rising/falling event, sample interval) and an event log table recording triggered alarms. An admin would poll the alarm table to confirm thresholds are set appropriately for a monitored interface counter, and check the event log for recent alarm firings, which would reveal a sustained spike in errors or utilization on a given port.

What Can Be Monitored

RMON statistics collection
history group sampling
alarm threshold configuration
triggered event/alarm log

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TruthValue

From WWP-SMI

wwpModulesLeos

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpLeosRmonMIB	1.3.6.1.4.1.6141.2.60.41			The MIB module for the ciena proprietary rmon configuration.
wwpLeosRmonMIBObjects	1.3.6.1.4.1.6141.2.60.41.1
wwpLeosRmon	1.3.6.1.4.1.6141.2.60.41.1.1
wwpLeosRmonFileTable	1.3.6.1.4.1.6141.2.60.41.1.1.1		not-accessible	The table specifying rmon file configuration.
wwpLeosRmonFileEntry	1.3.6.1.4.1.6141.2.60.41.1.1.1.1		not-accessible	An entry in the port stats table.
INT wwpLeosRmonFileIndex	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.1	INTEGER	read-only	placeholder for index
STR wwpLeosRmonFileName	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.2	DisplayString	read-write	The rmon file name
STR wwpLeosRmonFileRemoteDir	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.3	DisplayString	read-write	The location on the remote server to place the file
STR wwpLeosRmonFileServer	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.4	DisplayString	read-write	The servers name
INT wwpLeosRmonFileInterval	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.5	INTEGER	read-write	retransmit the last rmon file to the server
T/F wwpLeosRmonFilePushLastFile	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.6	TruthValue	read-write	retransmit the last rmon file to the server
INT wwpLeosRmonFileState	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.7	INTEGER	read-write	the current operational state of the file push
STR wwpLeosRmonFileLastRemoteName	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.8	DisplayString	read-only	The name and location on the remote server of the last file
STR wwpLeosRmonFileLastPushTime	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.9	DisplayString	read-only	The Time of the last file push
STR wwpLeosRmonFileLastPushStatus	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.10	DisplayString	read-only	the status of the last rmon file push
INT wwpLeosRmonFileUserFilesKept	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.11	INTEGER	read-write	Must be less than or equal to wwpLeosRmonFileMaxFiles
INT wwpLeosRmonFileMaxFiles	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.12	INTEGER	read-only	Only 1 file is supported on leos 4.x devices and the 3902, 3911 and 3920
INT wwpLeosRmonFileXftpTransferMode	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.13	INTEGER	read-write	The type of server to use.
STR wwpLeosRmonFileXftpLoginId	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.14	DisplayString	read-write	The username to use for xftp downloads.
STR wwpLeosRmonFileXftpPassword	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.15	DisplayString	read-write	The password to use for xftp downloads.
STR wwpLeosRmonFileXftpSecret	1.3.6.1.4.1.6141.2.60.41.1.1.1.1.16	DisplayString	read-write	The secret to use for xftp downloads.
wwpLeosRmonHistoryTable	1.3.6.1.4.1.6141.2.60.41.1.1.2		not-accessible	The table specifying rmon History configuration.
wwpLeosRmonHistoryEntry	1.3.6.1.4.1.6141.2.60.41.1.1.2.1		not-accessible	An entry in the port stats table.
INT wwpLeosRmonHistoryIndex	1.3.6.1.4.1.6141.2.60.41.1.1.2.1.1	INTEGER	read-only	placeholder for index
INT wwpLeosRmonHistoryAutoConfig	1.3.6.1.4.1.6141.2.60.41.1.1.2.1.2	INTEGER	read-write	auto create rmon history entries when ports go operationally enabled
INT wwpLeosRmonHistoryFileLogging	1.3.6.1.4.1.6141.2.60.41.1.1.2.1.3	INTEGER	read-write	file logging setting to use when creating the next autogenerated etherHistory entry
INT wwpLeosRmonHistoryInterval	1.3.6.1.4.1.6141.2.60.41.1.1.2.1.4	INTEGER	read-write	interval to use when creating the next autogenerated etherHistory entry
INT wwpLeosRmonHistoryNumBuckets	1.3.6.1.4.1.6141.2.60.41.1.1.2.1.5	INTEGER	read-write	number of buckets to request when creating the next autogenerated etherHistory entry
STR wwpLeosRmonHistoryOwner	1.3.6.1.4.1.6141.2.60.41.1.1.2.1.6	DisplayString	read-write	the owner to use when creating the next autogenerated etherHistory entry
INT wwpLeosRmonHistoryStatistics	1.3.6.1.4.1.6141.2.60.41.1.1.2.1.7	INTEGER	read-write	The statistics to gather when using the etherhistory
wwpLeosRmonMIBNotificationPrefix	1.3.6.1.4.1.6141.2.60.41.2
wwpLeosRmonMIBNotifications	1.3.6.1.4.1.6141.2.60.41.2.0
wwpLeosRmonMIBConformance	1.3.6.1.4.1.6141.2.60.41.3
wwpLeosRmonsMIBCompliances	1.3.6.1.4.1.6141.2.60.41.3.1
wwpLeosRmonMIBGroups	1.3.6.1.4.1.6141.2.60.41.3.2

RFC description

Provides RMON (Remote Monitoring) configuration management for Ciena LEOS optical networking equipment.

Start monitoring Ciena LEOS / World Wide Packets Metro Ethernet device (RMON statistics/history/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-LEOS-RMON-MIB

What Is WWP-LEOS-RMON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description