All MIBs › WS-SW-ACL-MIB
Organization: Symbol Technologies, Inc.
Last Updated: 2009-11-05
Category: Symbol Technologies Wireless
Description: Manages Symbol Technologies wireless switch access control list rules, policy binding, and packet filter statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is WS-SW-ACL-MIB?
WS-SW-ACL-MIB is a Symbol Technologies (Motorola) proprietary MIB for the vendor's wireless switch product line, covering access-control list (ACL) and NAT configuration used to filter and translate traffic on the switch. It exposes configuration data such as ACL rule definitions, rule-to-interface/policy bindings, and packet filter match/drop statistics. For monitoring purposes it is used primarily to track the operational effect of security policy on the device, i.e., how many packets each ACL rule has permitted or denied, which is a useful indicator of misconfigured filters or active attack traffic rather than physical hardware health. It depends on the vendor's underlying wireless switch platform MIB for interface and system identification context. It is deployed in enterprise wireless network environments where Symbol/Motorola wireless switches enforce perimeter or per-VLAN traffic filtering and address translation. Engineers can download the WS-SW-ACL-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WS-SW-ACL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Symbol Technologies/Motorola wireless switch
Monitoring Examples
No sample object names were supplied for this module, so specific table/object names cannot be quoted; typically an admin would poll per-rule packet counters (an ACL statistics table keyed by rule ID) to see hit/drop counts per policy. A sudden spike in denied-packet counters on a specific ACL entry would indicate either a misapplied rule blocking legitimate traffic or a burst of traffic matching a security filter, such as a probe or scan.
What Can Be Monitored
- ACL rule definitions
- rule-to-port/policy bindings
- packet permit/deny counters
- NAT translation configuration
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| PhysAddress | |
| RowStatus | |
| TruthValue |
From WS-SW-SMI
| wsSwAcl | OBJECT-IDENTITY |
From WS-TYPE-MIB
| AbbrevRowStatus | |
| DoActionNow |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| wsSwAclMibModule | 1.3.6.1.4.1.388.14.2.11.1 | MIB for Access-Control List (ACL) and NAT configuration. | ||
| wsSwAclMIB | 1.3.6.1.4.1.388.14.2.11.1.2 | |||
| wsSwAclTable | 1.3.6.1.4.1.388.14.2.11.1.2.1 | not-accessible | Table for listing the ACLs configured on the switch. | |
| wsSwAclEntry | 1.3.6.1.4.1.388.14.2.11.1.2.1.1 | not-accessible | An entry in the ACL Table. | |
| STR wsSwAclId | 1.3.6.1.4.1.388.14.2.11.1.2.1.1.1 | DisplayString | read-write | The identifier string for the ACL, usually a number. |
| INT wsSwAclType | 1.3.6.1.4.1.388.14.2.11.1.2.1.1.2 | INTEGER | read-create | The ACL type, whether standard IP or extended IP or extended MAC. |
| ABB wsSwAclRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.1.1.3 | AbbrevRowStatus | read-create | Row status for the ACL entry. |
| DOA wsSwAclClearAllAcls | 1.3.6.1.4.1.388.14.2.11.1.2.2 | DoActionNow | read-write | A scalar used to clear all the ACLs in the ACL table. |
| wsSwAclStdIpAclTable | 1.3.6.1.4.1.388.14.2.11.1.2.3 | not-accessible | Table for standard IP ACLs. | |
| wsSwAclStdIpAclEntry | 1.3.6.1.4.1.388.14.2.11.1.2.3.1 | not-accessible | An entry in the standard IP ACL Table. | |
| INT wsSwAclStdIpAclPrecedence | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.1 | INTEGER | read-create | The precedence number for the Access Control Entry (ACE). 1 is the highest precedence rule and 5000 is the lowest precedence rule. |
| INT wsSwAclStdIpAclOpType | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.2 | INTEGER | read-create | The operation type (permit or deny) for this ACE. |
| IP wsSwAclStdIpAclSrcIp | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.3 | IpAddress | read-create | The source IP address for this ACE. |
| INT wsSwAclStdIpAclSrcIpMask | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.4 | INTEGER | read-create | The source IP address mask for this ACE. |
| INT wsSwAclStdIpAclMark8021p | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.5 | INTEGER | read-create | The 802.1p VLAN user priority (to be used with -mark- action) |
| INT wsSwAclStdIpAclTos | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.6 | INTEGER | read-create | The TOS bits in the IP header (to be used with -mark- action) |
| INT wsSwAclStdIpAclWlanIndex | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.7 | INTEGER | read-create | The WLAN index to be used with this standard IP ACL. Note: Use the wsSwAclWlanAclTable to set ACLs on WLANs. |
| ABB wsSwAclStdIpAclRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.8 | AbbrevRowStatus | read-create | The row status for this ACE. |
| T/F wsSwAclStdIpAclLog | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.9 | TruthValue | read-create | Log a match to this entry. |
| INT wsSwAclStdIpAclMarkDscp | 1.3.6.1.4.1.388.14.2.11.1.2.3.1.10 | INTEGER | read-create | The DSCP codepoint in the IP header (to be used with -mark- action) |
| wsSwAclExtIpAclTable | 1.3.6.1.4.1.388.14.2.11.1.2.4 | not-accessible | Table for extended IP ACLs. | |
| wsSwAclExtIpAclEntry | 1.3.6.1.4.1.388.14.2.11.1.2.4.1 | not-accessible | An entry in the extended IP ACL Table. | |
| INT wsSwAclExtIpAclPrecedence | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.1 | INTEGER | read-create | The precedence number for the Access Control Entry (ACE). 1 is the highest precedence rule and 5000 is the lowest precedence rule. |
| INT wsSwAclExtIpAclOpType | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.2 | INTEGER | read-create | The operation type (permit or deny) for this ACE. |
| IP wsSwAclExtIpAclSrcIp | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.3 | IpAddress | read-create | The source IP address for this ACE. |
| INT wsSwAclExtIpAclSrcIpMask | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.4 | INTEGER | read-create | The source IP address mask for this ACE. |
| IP wsSwAclExtIpAclDestIp | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.5 | IpAddress | read-create | The destination IP address for this ACE. |
| INT wsSwAclExtIpAclDestIpMask | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.6 | INTEGER | read-create | The destination IP address mask for this ACE. |
| INT wsSwAclExtIpAclProtocolType | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.7 | INTEGER | read-create | The protocol type (ICMP/IP/TCP/UDP) for this ACE. Please use the object wsSwAclExtIpAclProtocol instead of this object. |
| INT wsSwAclExtIpAclMark8021p | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.8 | INTEGER | read-create | The 802.1p VLAN user priority (to be used with -mark- action) |
| INT wsSwAclExtIpAclTos | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.9 | INTEGER | read-create | The TOS bits in the IP header (to be used with -mark- action) |
| INT wsSwAclExtIpAclWlanIndex | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.10 | INTEGER | read-create | The WLAN index to be used with this extended IP ACL. Note: Use the wsSwAclWlanAclTable to set ACLs on WLANs. |
| ABB wsSwAclExtIpAclRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.11 | AbbrevRowStatus | read-create | The row status for this ACE. |
| T/F wsSwAclExtIpAclLog | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.12 | TruthValue | read-create | Log a match to this entry. |
| INT wsSwAclExtIpAclMarkDscp | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.13 | INTEGER | read-create | The DSCP codepoint in the IP header (to be used with -mark- action) |
| OCT wsSwAclExtIpAclProtocol | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.14 | OCTET STRING | read-create | The protocol name or number for this ACE. 0 or ip : Internet Protocol, pseudo protocol name. 1 to 254 or protocol name : Assigned Internet Protocol Number or Name as published by IANA at http://www.iana.org/assignments/protocol-numbers/. For e.g. the name udp or the number 17 can be set in this object for the UDP protocol. Reading this object returns the name for known protocol. |
| OCT wsSwAclExtIpAclDescr | 1.3.6.1.4.1.388.14.2.11.1.2.4.1.15 | OCTET STRING | read-create | Description for this ACE. |
| wsSwAclExtIpAclIcmpTable | 1.3.6.1.4.1.388.14.2.11.1.2.5 | not-accessible | A table for Extended IP Acls ICMP Protocol Parameters configuration | |
| wsSwAclExtIpAclIcmpEntry | 1.3.6.1.4.1.388.14.2.11.1.2.5.1 | not-accessible | An entry in the table for Extended IP Acls ICMP Protocol Parameters configuration | |
| INT wsSwAclExtIpAclIcmpType | 1.3.6.1.4.1.388.14.2.11.1.2.5.1.1 | INTEGER | read-create | The type of the ICMP message. |
| INT wsSwAclExtIpAclIcmpCode | 1.3.6.1.4.1.388.14.2.11.1.2.5.1.2 | INTEGER | read-create | The code within the ICMP message. |
| ABB wsSwAclExtIpAclIcmpRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.5.1.3 | AbbrevRowStatus | read-create | The row status for this entry in the wsSwAclExtIpAclIcmpTable. |
| wsSwAclExtIpAclTcpUdpTable | 1.3.6.1.4.1.388.14.2.11.1.2.6 | not-accessible | A table for Extended IP Acls TCP/UDP Protocol Parameters configuration | |
| wsSwAclExtIpAclTcpUdpEntry | 1.3.6.1.4.1.388.14.2.11.1.2.6.1 | not-accessible | An entry in the table for Extended IP Acls TCP/UDP Protocol Parameters configuration | |
| INT wsSwAclExtIpAclTcpUdpSrcPortLow | 1.3.6.1.4.1.388.14.2.11.1.2.6.1.1 | INTEGER | read-create | The low value in the range of TCP/UDP source port numbers permitted or denied for an ACE rule. |
| INT wsSwAclExtIpAclTcpUdpSrcPortHigh | 1.3.6.1.4.1.388.14.2.11.1.2.6.1.2 | INTEGER | read-create | The high value in the range of TCP/UDP source port numbers permitted or denied for an ACE rule. |
| INT wsSwAclExtIpAclTcpUdpDestPortLow | 1.3.6.1.4.1.388.14.2.11.1.2.6.1.3 | INTEGER | read-create | The low value in the range of TCP/UDP destination port numbers permitted or denied for an ACE rule. |
| INT wsSwAclExtIpAclTcpUdpDestPortHigh | 1.3.6.1.4.1.388.14.2.11.1.2.6.1.4 | INTEGER | read-create | The high value in the range of TCP/UDP destination port numbers permitted or denied for an ACE rule. |
| ABB wsSwAclExtIpAclTcpUdpRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.6.1.5 | AbbrevRowStatus | read-create | The row status for this entry in the wsSwAclExtIpAclTcpUdpTable. |
| OCT wsSwAclExtIpAclTcpUdpDestServiceName | 1.3.6.1.4.1.388.14.2.11.1.2.6.1.6 | OCTET STRING | read-create | Service name of the well known TCP/UDP destination port permitted or denied for an ACE rule. This object can be used instead of wsSwAclExtIpAclTcpUdpDestPortLow when specifying a single destination port. For e.g. the name smtp can be set in this object instead of the number 25 in wsSwAclExtIpAclTcpUdpDestPortLow. This object is not used when specifying a range of destination ports. Well known ports and names are published by IANA at http://www.iana.org/assignments/port-numbers. |
| wsSwAclExtMacAclTable | 1.3.6.1.4.1.388.14.2.11.1.2.7 | not-accessible | A table for Extended MAC ACLs. | |
| wsSwAclExtMacAclEntry | 1.3.6.1.4.1.388.14.2.11.1.2.7.1 | not-accessible | A entry in the Extended MAC ACLs table. | |
| INT wsSwAclExtMacAclPrecedence | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.1 | INTEGER | read-create | The precedence number for the Access Control Entry (ACE). 1 is the highest precedence rule and 5000 is the lowest precedence rule. |
| INT wsSwAclExtMacAclOpType | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.2 | INTEGER | read-create | The operation type (permit or deny) for this ACE. |
| PHY wsSwAclExtMacAclSrcMac | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.3 | PhysAddress | read-create | The source MAC address for this ACE. |
| PHY wsSwAclExtMacAclSrcMacMask | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.4 | PhysAddress | read-create | The source MAC address mask for this ACE. |
| PHY wsSwAclExtMacAclDestMac | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.5 | PhysAddress | read-create | The destination MAC address for this ACE. |
| PHY wsSwAclExtMacAclDestMacMask | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.6 | PhysAddress | read-create | The destination MAC address mask for this ACE. |
| INT wsSwAclExtMacAclVlanId | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.7 | INTEGER | read-create | The VLAN identifier for this ACE. |
| INT wsSwAclExtMacAclVlanUserPriority | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.8 | INTEGER | read-create | The VLAN user priority for this ACE. |
| INT wsSwAclExtMacAclEtherType | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.9 | INTEGER | read-create | The ether type for this ACE. |
| INT wsSwAclExtMacAclMark8021p | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.10 | INTEGER | read-create | The 802.1p VLAN user priority (to be used with -mark- action) |
| INT wsSwAclExtMacAclTos | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.11 | INTEGER | read-create | The TOS bits in the IP header (to be used with -mark- action) |
| INT wsSwAclExtMacAclWlanIndex | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.12 | INTEGER | read-create | The WLAN index to be used with this extended MAC ACL. Note: Use the wsSwAclWlanAclTable to set ACLs on WLANs in dataplane platforms. |
| ABB wsSwAclExtMacAclRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.13 | AbbrevRowStatus | read-create | The row status for this ACE. |
| INT wsSwAclExtMacAclMarkDscp | 1.3.6.1.4.1.388.14.2.11.1.2.7.1.14 | INTEGER | read-create | The DSCP codepoint in the IP header (to be used with -mark- action) |
| wsSwAclInterfaceAclTable | 1.3.6.1.4.1.388.14.2.11.1.2.8 | not-accessible | A table for applying ACLs to an interface. | |
| wsSwAclInterfaceAclEntry | 1.3.6.1.4.1.388.14.2.11.1.2.8.1 | not-accessible | An entry in the wsSwAclInterfaceAclTable. | |
| STR wsSwAclInterfaceAclIfName | 1.3.6.1.4.1.388.14.2.11.1.2.8.1.1 | DisplayString | read-create | The name of the interface to which ACL is applied. |
| STR wsSwAclInterfaceAclInboundIpAclId | 1.3.6.1.4.1.388.14.2.11.1.2.8.1.2 | DisplayString | read-create | The identifier of the inbound IP ACL applied to the interface. |
| STR wsSwAclInterfaceAclInboundMacAclId | 1.3.6.1.4.1.388.14.2.11.1.2.8.1.3 | DisplayString | read-create | The identifier of the inbound MAC ACL applied to the interface. |
| ABB wsSwAclInterfaceAclRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.8.1.4 | AbbrevRowStatus | read-create | The row status for this entry in the wsSwAclInterfaceAclTable. |
| INT wsSwAclCountAllAcls | 1.3.6.1.4.1.388.14.2.11.1.2.9 | INTEGER | read-only | Count of all the ACLs present in the wireless switch. |
| wsSwAclNatIfTable | 1.3.6.1.4.1.388.14.2.11.1.2.10 | not-accessible | A table for configuring the type of an interface for NAT. | |
| wsSwAclNatIfEntry | 1.3.6.1.4.1.388.14.2.11.1.2.10.1 | not-accessible | An entry in the wsSwAclNatIfTable. | |
| STR wsSwAclNatIfName | 1.3.6.1.4.1.388.14.2.11.1.2.10.1.1 | DisplayString | read-create | The name of the interface to be NATed. |
| INT wsSwAclNatIfType | 1.3.6.1.4.1.388.14.2.11.1.2.10.1.2 | INTEGER | read-create | The interface type which is to be NAT'ed. |
| ABB wsSwAclNatIfRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.10.1.3 | AbbrevRowStatus | read-create | The row status for this entry in the wsSwAclNatIfTable. |
| wsSwAclStaticNatTable | 1.3.6.1.4.1.388.14.2.11.1.2.11 | not-accessible | A table for configuring static NAT entries. | |
| wsSwAclStaticNatEntry | 1.3.6.1.4.1.388.14.2.11.1.2.11.1 | not-accessible | An entry in the static NAT table. | |
| I32 wsSwAclStaticNatIndex | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.1 | Integer32 | read-create | The integer index for this entry in wsSwAclStaticNatTable. |
| IP wsSwAclStaticNatLocalAddr | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.2 | IpAddress | read-create | The local IP address for this static NAT entry. |
| IP wsSwAclStaticNatGlobalAddr | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.3 | IpAddress | read-create | The global IP address for this static NAT entry. |
| INT wsSwAclStaticNatIfType | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.4 | INTEGER | read-create | The type (inside/outside) of the interface to be NAT'ed for this static NAT entry. |
| INT wsSwAclStaticNatDirection | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.5 | INTEGER | read-create | The direction of the interface (source or destination) in which NAT is to be applied for this static NAT mapping. |
| I32 wsSwAclStaticNatLocalPort | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.6 | Integer32 | read-create | The local NAT port used for this entry. |
| I32 wsSwAclStaticNatGlobalPort | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.7 | Integer32 | read-create | The global NAT port used for this entry. |
| INT wsSwAclStaticNatLocalProtocol | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.8 | INTEGER | read-create | The local protocol for this static NAT entry. |
| ABB wsSwAclStaticNatRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.11.1.9 | AbbrevRowStatus | read-create | The row status for this entry in the wsSwAclStaticNatTable. |
| wsSwAclDynamicNatTable | 1.3.6.1.4.1.388.14.2.11.1.2.12 | not-accessible | A table for configuring dynamic NAT entries in the switch. | |
| wsSwAclDynamicNatEntry | 1.3.6.1.4.1.388.14.2.11.1.2.12.1 | not-accessible | An entry in the wsSwAclDynamicNatTable. | |
| INT wsSwAclDynamicNatIndex | 1.3.6.1.4.1.388.14.2.11.1.2.12.1.1 | INTEGER | read-create | The simple integer index for the wsSwAclDynamicNatTable. |
| INT wsSwAclDynamicNatIfType | 1.3.6.1.4.1.388.14.2.11.1.2.12.1.2 | INTEGER | read-create | The type of the interface to be NAT'ed for this dynamic NAT entry. |
| INT wsSwAclDynamicNatDirection | 1.3.6.1.4.1.388.14.2.11.1.2.12.1.3 | INTEGER | read-create | The direction of the interface (source or destination) in which NAT is to be applied. |
| STR wsSwAclDynamicNatAclId | 1.3.6.1.4.1.388.14.2.11.1.2.12.1.4 | DisplayString | read-create | The ACL identifier to be used in configuring this dynamic NAT entry. |
| STR wsSwAclDynamicNatIfName | 1.3.6.1.4.1.388.14.2.11.1.2.12.1.5 | DisplayString | read-create | The name of the interface to which this dynamic NAT rule is applied. |
| ABB wsSwAclDynamicNatRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.12.1.6 | AbbrevRowStatus | read-create | The row status for this entry in the wsSwAclDynamicNatTable. |
| IP wsSwAclDynamicNatIpAddr | 1.3.6.1.4.1.388.14.2.11.1.2.12.1.7 | IpAddress | read-create | The IpAddress to which this dynamic NAT rule is applied. |
| wsSwAclNatTable | 1.3.6.1.4.1.388.14.2.11.1.2.13 | not-accessible | A table for showing the status of Network Address Translation entries. | |
| wsSwAclNatEntry | 1.3.6.1.4.1.388.14.2.11.1.2.13.1 | not-accessible | An entry in the wsSwAclNatTable, indexed by a simple integer, wsSwAclNatIndex. | |
| I32 wsSwAclNatIndex | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.1 | Integer32 | read-only | The integer index (NAT flow id) for this entry in wsSwAclNatTable. |
| IP wsSwAclNatInsideLocalAddress | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.2 | IpAddress | read-only | The inside local IP address for this entry in wsSwAclNatTable. |
| INT wsSwAclNatInsideLocalPort | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.3 | INTEGER | read-only | The inside local port for this entry in the wsSwAclNatTable. |
| IP wsSwAclNatInsideGlobalAddress | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.4 | IpAddress | read-only | The inside global IP address for this entry in wsSwAclNatTable. |
| INT wsSwAclNatInsideGlobalPort | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.5 | INTEGER | read-only | The inside global port for this entry in the wsSwAclNatTable. |
| IP wsSwAclNatOutsideLocalAddress | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.6 | IpAddress | read-only | The outside local IP address for this entry in wsSwAclNatTable. |
| INT wsSwAclNatOutsideLocalPort | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.7 | INTEGER | read-only | The outside local port for this entry in the wsSwAclNatTable. |
| STR wsSwAclNatOutsideGlobalAddress | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.8 | DisplayString | read-only | The outside global IP address for this entry in wsSwAclNatTable. |
| INT wsSwAclNatOutsideGlobalPort | 1.3.6.1.4.1.388.14.2.11.1.2.13.1.9 | INTEGER | read-only | The outside global port for this entry in the wsSwAclNatTable. |
| wsSwAclStatsTable | 1.3.6.1.4.1.388.14.2.11.1.2.14 | not-accessible | A table containing statistics per ACL rule/flow. | |
| wsSwAclStatsEntry | 1.3.6.1.4.1.388.14.2.11.1.2.14.1 | not-accessible | An entry containing the statistics for an ACL rule/flow. | |
| I32 wsSwAclStatsRuleId | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.1 | Integer32 | read-only | The rule identifier for this ACL rule. |
| INT wsSwAclStatsAction | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.2 | INTEGER | read-only | The action for this ACL rule. |
| STR wsSwAclStatsIfName | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.3 | DisplayString | read-only | The interface name to which this ACL rule is applied. |
| INT wsSwAclStatsPrecedence | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.4 | INTEGER | read-only | The rule precedence for this ACL rule. |
| INT wsSwAclStatsProtocol | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.5 | INTEGER | read-only | The protocol (IP/ICMP/TCP/UDCP) for this ACL rule. |
| IP wsSwAclStatsSrcIpLow | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.6 | IpAddress | read-only | The low end of the range of source IP addresses for this ACL rule. |
| IP wsSwAclStatsSrcIpHigh | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.7 | IpAddress | read-only | The high end of the range of source IP addresses for this ACL rule. |
| INT wsSwAclStatsSrcPortLow | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.8 | INTEGER | read-only | The low end of the range of source port values for this ACL rule. |
| INT wsSwAclStatsSrcPortHigh | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.9 | INTEGER | read-only | The high end of the range of source port values for this ACL rule. |
| IP wsSwAclStatsDestIpLow | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.10 | IpAddress | read-only | The low end of the range of destination IP addresses for this ACL rule. |
| IP wsSwAclStatsDestIpHigh | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.11 | IpAddress | read-only | The high end of the range of destination IP addresses for this ACL rule. |
| INT wsSwAclStatsDestPortLow | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.12 | INTEGER | read-only | The low end of the range of destination port values for this ACL rule. |
| INT wsSwAclStatsDestPortHigh | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.13 | INTEGER | read-only | The high end of the range of destination port values for this ACL rule. |
| C32 wsSwAclStatsTimesUsed | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.14 | Counter32 | read-only | Number of times this flow rule has been used (either hits or drops). |
| C32 wsSwAclStatsNumFlowsActive | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.15 | Counter32 | read-only | The total number of active flows for this ACL rule. |
| C32 wsSwAclStatsNumFlowsTotal | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.16 | Counter32 | read-only | The total number of flows for this ACL rule. |
| C64 wsSwAclStatsTotalInPkts | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.17 | Counter64 | read-only | The total number of incoming packets for this ACL rule. |
| C64 wsSwAclStatsTotalOutPkts | 1.3.6.1.4.1.388.14.2.11.1.2.14.1.18 | Counter64 | read-only | The total number of outgoing packets for this ACL rule. |
| STR wsSwAclSetErrorA | 1.3.6.1.4.1.388.14.2.11.1.2.15 | DisplayString | read-only | The error message, if any, from the last set request to any of the following tablular or scalar objects: wsSwAclTable, wsSwAclClearAllAcls, wsSwAclStdIpAclTable, wsSwAclExtIpAclTable, wsSwAclExtIpAclIcmpTable, wsSwAclExtIpAclTcpUdpTable, wsSwAclExtMacAclTable. |
| STR wsSwAclSetErrorB | 1.3.6.1.4.1.388.14.2.11.1.2.16 | DisplayString | read-only | The error message, if any, from the last set request to any of the following tablular or scalar objects: wsSwAclInterfaceAclTable. |
| STR wsSwAclNatSetError | 1.3.6.1.4.1.388.14.2.11.1.2.17 | DisplayString | read-only | The error message, if any, from the last set request to any of the following tablular or scalar objects: wsSwAclNatIfTable, wsSwAclStaticNatTable, wsSwAclDynamicNatTable. |
| wsSwAclWlanAclTable | 1.3.6.1.4.1.388.14.2.11.1.2.18 | not-accessible | This table allows the user to configure the L2 ACLs on a per-WLAN basis rather than on the physical interfaces. | |
| wsSwAclWlanAclEntry | 1.3.6.1.4.1.388.14.2.11.1.2.18.1 | not-accessible | An entry in the wsSwAclWlanAclTable. | |
| INT wsSwAclWlanIndex | 1.3.6.1.4.1.388.14.2.11.1.2.18.1.1 | INTEGER | read-create | The index of the WLAN which uniquely denotes a WLAN. This ranges from 1 to 256. |
| INT wsSwAclWlanAclDirection | 1.3.6.1.4.1.388.14.2.11.1.2.18.1.2 | INTEGER | read-create | The direction in which the ACL to be applied on this WLAN port. |
| STR wsSwAclWlanMacAclId | 1.3.6.1.4.1.388.14.2.11.1.2.18.1.3 | DisplayString | read-create | The name or number of the MAC ACL, which uniquely denotes the particular MAC ACL being applied on this WLAN. |
| STR wsSwAclWlanIpAclId | 1.3.6.1.4.1.388.14.2.11.1.2.18.1.4 | DisplayString | read-create | The name or number of the IP ACL, which uniquely denotes the particular IP ACL being applied on this WLAN. |
| ABB wsSwAclWlanAclRowStatus | 1.3.6.1.4.1.388.14.2.11.1.2.18.1.5 | AbbrevRowStatus | read-create | SNMP row status to create/configure this entry. |
| wsSwAclRuleStatsTable | 1.3.6.1.4.1.388.14.2.11.1.2.19 | not-accessible | A table containing statistics per ACL rule | |
| wsSwAclRuleStatsEntry | 1.3.6.1.4.1.388.14.2.11.1.2.19.1 | not-accessible | An entry in wsSwAclRuleStatsTable | |
| INT wsSwAclRuleStatsAclPrecedence | 1.3.6.1.4.1.388.14.2.11.1.2.19.1.1 | INTEGER | read-only | The precedence number for the Access Control Entry (ACE). 1 is the highest precedence rule and 5000 is the lowest precedence rule. |
| C64 wsSwAclRuleStatsHitcount | 1.3.6.1.4.1.388.14.2.11.1.2.19.1.2 | Counter64 | read-only | The number of times this rule has matched a packet |
| DOA wsSwAclClearRuleStats | 1.3.6.1.4.1.388.14.2.11.1.2.20 | DoActionNow | read-write | Clear all the statistics in wsSwAclRuleStatsTable |
| wsSwAclConformance | 1.3.6.1.4.1.388.14.2.11.1.2.100 | |||
| wsSwAclGroups | 1.3.6.1.4.1.388.14.2.11.1.2.100.1 | |||
| wsSwAclGroup | 1.3.6.1.4.1.388.14.2.11.1.2.100.1.1 | Group of ACL and NAT objects | ||
| wsSwAclDeprecatedGroup | 1.3.6.1.4.1.388.14.2.11.1.2.100.1.2 | Group of deprecated objects. | ||
| wsSwAclCompls | 1.3.6.1.4.1.388.14.2.11.1.2.100.2 |
RFC description
Symbol access control list and NAT configuration MIB for managing network traffic filtering policies.
Start monitoring Symbol Technologies/Motorola wireless switch (ACL/NAT rule permit-deny counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.