WS-SW-DHCPSERVER-MIB

All MIBs › WS-SW-DHCPSERVER-MIB

Organization: Symbol Technologies

Last Updated: 2009-11-04

Category: Symbol Technologies Wireless

Description: Covers the embedded DHCP server on Symbol Technologies wireless switches, including address pool management, lease assignment, and exclusion ranges.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WS-SW-DHCPSERVER-MIB?

WS-SW-DHCPSERVER-MIB is a Symbol Technologies (Motorola/Zebra) wireless switch MIB covering the switch's embedded DHCP server functionality, used to assign IP addresses to wireless clients directly from the switch rather than an external DHCP server. It is intended to expose configured address pools, scope/exclusion ranges, and active lease assignments for clients served by the switch. Its monitoring purpose relates to software service status and capacity: it would let an operator determine how many addresses in a DHCP pool remain available, detect pool exhaustion before it blocks new client associations, and audit current lease assignments, though the module description gives no further detail and no object names were supplied. It logically depends on standard DHCP protocol concepts even though implemented as a vendor-specific embedded service. It is deployed on Symbol/Motorola WS-series wireless switches, where WS-SW-DHCPSERVER-MIB SNMP polling monitors integrated DHCP service to wireless client populations.

IPNetwork Monitor allows you to monitor SNMP objects defined in WS-SW-DHCPSERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Symbol Technologies / Motorola WS-series wireless switch

Monitoring Examples

No sample objects were provided for this module, so a concrete polling scenario cannot be described without inventing names; based on the short description, this MIB would be expected to expose a DHCP pool/lease table with address range, exclusion, and active-lease fields. An operator would typically poll such a table to detect when a DHCP scope is nearing exhaustion, but no confirmed object identifiers are available here.

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
PhysAddress
RowStatus
TruthValue

From WS-SW-SMI

wsSwDHCP

OBJECT-IDENTITY

From WS-TYPE-MIB

AbbrevRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
wsSwDhcpServerModule	1.3.6.1.4.1.388.14.2.3.5			This module contains DHCP server MIB definition
wsSwDhcpSvrGlobal	1.3.6.1.4.1.388.14.2.3.5.1
T/F wsSwDhcpSvrBootp	1.3.6.1.4.1.388.14.2.3.5.1.1	TruthValue	read-write	Allow /Ignore Bootp requests
INT wsSwDhcpSvrPingInterval	1.3.6.1.4.1.388.14.2.3.5.1.2	INTEGER	read-write	Ping time interval
T/F wsSwDhcpSvrEnable	1.3.6.1.4.1.388.14.2.3.5.1.3	TruthValue	read-write	Description.
INT wsSwDhcpSvrRestart	1.3.6.1.4.1.388.14.2.3.5.1.4	INTEGER	read-write	dhcp svr restart
INT wsSwDhcpSvrStatus	1.3.6.1.4.1.388.14.2.3.5.1.5	INTEGER	read-only	Description.
STR wsSwDhcpSvrLastErrorMsg	1.3.6.1.4.1.388.14.2.3.5.1.6	DisplayString	read-only	Description.
T/F wsSwDhcpDeleteAllLease	1.3.6.1.4.1.388.14.2.3.5.1.7	TruthValue	read-write	This is set only OID. Get on this OID will always return false. This is used to delete all the DHCP bindings.
C32 wsSwDhcpSvrIPPoolUsage	1.3.6.1.4.1.388.14.2.3.5.1.8	Counter32	read-only	% of available DHCP IP pool used. Unit is 0.1 %
C32 wsSwDhcpSvrPktCount	1.3.6.1.4.1.388.14.2.3.5.1.9	Counter32	read-only	Total number of all incoming DHCP packets.
C32 wsSwDhcpSvrReqSuccessCount	1.3.6.1.4.1.388.14.2.3.5.1.10	Counter32	read-only	Total number of all successful DHCP requests.
wsSwDhcpSvrExcludeTable	1.3.6.1.4.1.388.14.2.3.5.2		not-accessible	Description.
wsSwDhcpSvrExcludeEntry	1.3.6.1.4.1.388.14.2.3.5.2.1		not-accessible	Description.
IP wsSwDhcpSvrExcludeLowIpAddr	1.3.6.1.4.1.388.14.2.3.5.2.1.1	IpAddress	read-only	Excluded low address
STR wsSwDhcpSvrExcludeHighIpAddr	1.3.6.1.4.1.388.14.2.3.5.2.1.2	DisplayString	read-only	Excluded high address
ROW wsSwDhcpSvrExcludeRowStatus	1.3.6.1.4.1.388.14.2.3.5.2.1.3	RowStatus	read-create	row status of wsSwDhcpSvrExcludeEntry
wsSwDhcpSvrPoolTable	1.3.6.1.4.1.388.14.2.3.5.3		not-accessible	Description.
wsSwDhcpSvrPoolEntry	1.3.6.1.4.1.388.14.2.3.5.3.1		not-accessible	Description.
STR wsSwDhcpSvrPoolNameIndex	1.3.6.1.4.1.388.14.2.3.5.3.1.1	DisplayString	read-only	index of wsSwDhcpSvrPoolTable
INT wsSwDhcpSvrPoolType	1.3.6.1.4.1.388.14.2.3.5.3.1.2	INTEGER	read-only	Description.
IP wsSwDhcpSvrPoolHostIp	1.3.6.1.4.1.388.14.2.3.5.3.1.3	IpAddress	read-create	Description.
STR wsSwDhcpSvrPoolSubnetIpAndMask	1.3.6.1.4.1.388.14.2.3.5.3.1.4	DisplayString	read-create	subnet IP and mask
OCT wsSwDhcpSvrPoolClientId	1.3.6.1.4.1.388.14.2.3.5.3.1.5	OCTET STRING	read-create	client identifier To prepend Null character use \0 at the beginning.
STR wsSwDhcpSvrPoolClientName	1.3.6.1.4.1.388.14.2.3.5.3.1.6	DisplayString	read-create	Description.
STR wsSwDhcpSvrPoolHardWareAddrAndType	1.3.6.1.4.1.388.14.2.3.5.3.1.7	DisplayString	read-create	Hardware address and hardware type for the pool. Hardware type is optional. Default hardware type is ethernet Input formats are XX:XX:XX:XX:XX:XX or XX:XX:XX:XX:XX:XX,ethernet or XX:XX:XX:XX:XX:XX,token-ring
STR wsSwDhcpSvrPoolDomainName	1.3.6.1.4.1.388.14.2.3.5.3.1.8	DisplayString	read-create	Domain name
INT wsSwDhcpSvrPoolNetBiosNodeType	1.3.6.1.4.1.388.14.2.3.5.3.1.9	INTEGER	read-create	etbios-node-type
STR wsSwDhcpSvrPoolBootfile	1.3.6.1.4.1.388.14.2.3.5.3.1.10	DisplayString	read-create	boot file name
INT wsSwDhcpSvrPoolDdnsUpdate	1.3.6.1.4.1.388.14.2.3.5.3.1.11	INTEGER	read-create	DDNS updates
INT wsSwDhcpSvrPoolDdnsUpdateAll	1.3.6.1.4.1.388.14.2.3.5.3.1.12	INTEGER	read-create	DDNS Update All functionality will not be supported anymore.
STR wsSwDhcpSvrPoolDdnsIp	1.3.6.1.4.1.388.14.2.3.5.3.1.13	DisplayString	read-create	This can take a max of 2 IP addresses in the format IP1, IP2. To remove just IP1 use any of the following formats ,IP2 or 0.0.0.0,IP2 To remove just IP2 use any of the following formats IP1, or IP1,0.0.0.0 To remove both IP addresses use any of the following formats (blank string or zero length string) or ,
STR wsSwDhcpSvrPoolDdnsDomainName	1.3.6.1.4.1.388.14.2.3.5.3.1.14	DisplayString	read-create	DDNS domain name
INT wsSwDhcpSvrPoolDdnsTtl	1.3.6.1.4.1.388.14.2.3.5.3.1.15	INTEGER	read-create	DDNS TTL value. This OID can take values in range 1 to 864000. The value -1 is used to remove the configured value.
T/F wsSwDhcpSvrPoolDdnsMultiUserClass	1.3.6.1.4.1.388.14.2.3.5.3.1.16	TruthValue	read-create	enable/disable DDNS multi user class
STR wsSwDhcpSvrPoolDefaultRouter	1.3.6.1.4.1.388.14.2.3.5.3.1.17	DisplayString	read-create	Default Router, the format is xxx.xxx.xxx.xxx, yyy.yyy.yyy.yy,..., the maximum number of the router entry is 8
IP wsSwDhcpSvrPoolBootpNextSvrIP	1.3.6.1.4.1.388.14.2.3.5.3.1.18	IpAddress	read-create	bootp next server address, set it to 0.0.0.0 means there is no bootp next server address
STR wsSwDhcpSvrPoolDnsSvrIP	1.3.6.1.4.1.388.14.2.3.5.3.1.19	DisplayString	read-create	dns server address, the format is xxx.xxx.xxx.xxx, yyy.yyy.yyy.yy,..., the maximum number of the server entry is 8
STR wsSwDhcpSvrPoolNetbiosSvrIP	1.3.6.1.4.1.388.14.2.3.5.3.1.20	DisplayString	read-create	net bios server address, the format is xxx.xxx.xxx.xxx, yyy.yyy.yyy.yy,..., the maximum number of the server entry is 8
INT wsSwDhcpSvrPoolNoDefault	1.3.6.1.4.1.388.14.2.3.5.3.1.21	INTEGER	read-create	No default
STR wsSwDhcpSvrPoolLeaseTime	1.3.6.1.4.1.388.14.2.3.5.3.1.22	DisplayString	read-create	Lease time, the format is XX:YY:ZZ, which represents days:hours:mins. 00:00:00 means infinite lease
ROW wsSwDhcpSvrPoolRowStatus	1.3.6.1.4.1.388.14.2.3.5.3.1.23	RowStatus	read-create	row status of wsSwDhcpSvrPoolTable
INT wsSwDhcpSvrPoolUtilization	1.3.6.1.4.1.388.14.2.3.5.3.1.24	INTEGER	read-only	The IP pool's current utilization.
U32 wsSwDhcpSvrPoolLeaseTimeSeconds	1.3.6.1.4.1.388.14.2.3.5.3.1.25	Unsigned32	read-create	Lease time in seconds. A zero value means infinite lease.
C32 wsSwDhcpSrvPoolReqSuccessCount	1.3.6.1.4.1.388.14.2.3.5.3.1.26	Counter32	read-only	Number of successful DHCP requests.
wsSwDhcpSvrIncludeTable	1.3.6.1.4.1.388.14.2.3.5.4		not-accessible	Description.
wsSwDhcpSvrIncludeEntry	1.3.6.1.4.1.388.14.2.3.5.4.1		not-accessible	Description.
IP wsSwDhcpSvrIncludeLowIP	1.3.6.1.4.1.388.14.2.3.5.4.1.1	IpAddress	read-only	Included low address
STR wsSwDhcpSvrIncludeHighIP	1.3.6.1.4.1.388.14.2.3.5.4.1.2	DisplayString	read-only	Included high address
ROW wsSwDhcpSvrIncludeRowStatus	1.3.6.1.4.1.388.14.2.3.5.4.1.3	RowStatus	read-create	row status of wsSwDhcpSvrIncludeTable
wsSwDhcpSvrPoolOptionTable	1.3.6.1.4.1.388.14.2.3.5.5		not-accessible	Description.
wsSwDhcpSvrPoolOptionEntry	1.3.6.1.4.1.388.14.2.3.5.5.1		not-accessible	Description.
STR wsSwDhcpSvrPoolOptionName	1.3.6.1.4.1.388.14.2.3.5.5.1.1	DisplayString	read-only	option name
STR wsSwDhcpSvrPoolOptionValue	1.3.6.1.4.1.388.14.2.3.5.5.1.2	DisplayString	read-create	option tpe
ROW wsSwDhcpSvrPoolOptionRowStatus	1.3.6.1.4.1.388.14.2.3.5.5.1.3	RowStatus	read-create	row status of the table
wsSwDhcpBindingStatusTable	1.3.6.1.4.1.388.14.2.3.5.6		not-accessible	Description.
wsSwDhcpBindingStatusEntry	1.3.6.1.4.1.388.14.2.3.5.6.1		not-accessible	Description.
IP wsSwDhcpBindingStatusIp	1.3.6.1.4.1.388.14.2.3.5.6.1.1	IpAddress	read-only	IP address of binding
STR wsSwDhcpBindingStatusHardwareAddr	1.3.6.1.4.1.388.14.2.3.5.6.1.2	DisplayString	read-only	Hardware address
STR wsSwDhcpBindingStatusClientID	1.3.6.1.4.1.388.14.2.3.5.6.1.3	DisplayString	read-only	Description.
STR wsSwDhcpBindingStatusLeaseExpired	1.3.6.1.4.1.388.14.2.3.5.6.1.4	DisplayString	read-only	Lease expiration
INT wsSwDhcpBindingStatusLeaseType	1.3.6.1.4.1.388.14.2.3.5.6.1.5	INTEGER	read-only	Description.
ROW wsSwDhcpBindingStatusRowStatus	1.3.6.1.4.1.388.14.2.3.5.6.1.6	RowStatus	read-create	only delete is supported in this row-status.
wsSwDhcpSvrGlobalOptionTable	1.3.6.1.4.1.388.14.2.3.5.7		not-accessible	Description.
wsSwDhcpSvrGlobalOptionEntry	1.3.6.1.4.1.388.14.2.3.5.7.1		not-accessible	Description.
STR wsSwDhcpSvrGlobalOptionName	1.3.6.1.4.1.388.14.2.3.5.7.1.1	DisplayString	read-only	Description.
U32 wsSwDhcpSvrGlobalOptionCode	1.3.6.1.4.1.388.14.2.3.5.7.1.2	Unsigned32	read-create	Description.
INT wsSwDhcpSvrGlobalOptionType	1.3.6.1.4.1.388.14.2.3.5.7.1.3	INTEGER	read-create	Description.
ROW wsSwDhcpSvrGlobalOptionRowStatus	1.3.6.1.4.1.388.14.2.3.5.7.1.4	RowStatus	read-create	Description.
wsSwDhcpRelayTable	1.3.6.1.4.1.388.14.2.3.5.8		not-accessible	Description.
wsSwDhcpRelayEntry	1.3.6.1.4.1.388.14.2.3.5.8.1		not-accessible	Description.
STR wsSwDhcpRelayInterface	1.3.6.1.4.1.388.14.2.3.5.8.1.1	DisplayString	read-only	Interface Name
STR wsSwDhcpRelayTarget	1.3.6.1.4.1.388.14.2.3.5.8.1.2	DisplayString	read-only	This is a read-only attribute which shows the currently configured relay targets in the format Ip,interface;Ip,interface... There can be a maximum of 4 such relay targets.
STR wsSwDhcpRelayTargetSet	1.3.6.1.4.1.388.14.2.3.5.8.1.3	DisplayString	read-create	Relay target in the format IP,Iface, where IP is the IP address to which DHCP packets have to be relayed and Iface is the interface name on which response from the relayed DHCP Server is received. A maximum of 4 relay targets can be added one at a time. To remove individual relay targets, use the following format 0:IP, Iface. If there is only one relay target then it cannot be removed. In such a case the entire row has to be deleted.
ROW wsSwDhcpRelayRowStatus	1.3.6.1.4.1.388.14.2.3.5.8.1.4	RowStatus	read-create	Row status of DHCP Relay Table
wsSwDhcpSvrClassTable	1.3.6.1.4.1.388.14.2.3.5.9		not-accessible	DHCP Server Class Table. Class Table defines a class and associated user class option values.
wsSwDhcpSvrClassEntry	1.3.6.1.4.1.388.14.2.3.5.9.1		not-accessible	Description.
STR wsSwDhcpSvrClassName	1.3.6.1.4.1.388.14.2.3.5.9.1.1	DisplayString	read-only	DHCP Server class name. class name indexes into class Table.
STR wsSwDhcpSvrClassUsrClassOptValue1	1.3.6.1.4.1.388.14.2.3.5.9.1.2	DisplayString	read-create	User Class Option Value associated with the class
STR wsSwDhcpSvrClassUsrClassOptValue2	1.3.6.1.4.1.388.14.2.3.5.9.1.3	DisplayString	read-create	User Class Option Value associated with the class
STR wsSwDhcpSvrClassUsrClassOptValue3	1.3.6.1.4.1.388.14.2.3.5.9.1.4	DisplayString	read-create	User Class Option Value associated with the class
STR wsSwDhcpSvrClassUsrClassOptValue4	1.3.6.1.4.1.388.14.2.3.5.9.1.5	DisplayString	read-create	User Class Option Value associated with the class
STR wsSwDhcpSvrClassUsrClassOptValue5	1.3.6.1.4.1.388.14.2.3.5.9.1.6	DisplayString	read-create	User Class Option Value associated with the class
STR wsSwDhcpSvrClassUsrClassOptValue6	1.3.6.1.4.1.388.14.2.3.5.9.1.7	DisplayString	read-create	User Class Option Value associated with the class
STR wsSwDhcpSvrClassUsrClassOptValue7	1.3.6.1.4.1.388.14.2.3.5.9.1.8	DisplayString	read-create	User Class Option Value associated with the class
STR wsSwDhcpSvrClassUsrClassOptValue8	1.3.6.1.4.1.388.14.2.3.5.9.1.9	DisplayString	read-create	User Class Option Value associated with the class
T/F wsSwDhcpSvrClassMutipleUserClass	1.3.6.1.4.1.388.14.2.3.5.9.1.10	TruthValue	read-create	It defines weather DHCP clients are configured multiple user class options.
ABB wsSwDhcpSvrClassRowStatus	1.3.6.1.4.1.388.14.2.3.5.9.1.11	AbbrevRowStatus	read-create	Row Status of DHCP Server Class Table
wsSwDhcpSvrPoolClassTable	1.3.6.1.4.1.388.14.2.3.5.10		not-accessible	DHCP Server Pool Class Table. Pool Class Table defines association of class to the pool and address ranges associated with the pool class.
wsSwDhcpSvrPoolClassEntry	1.3.6.1.4.1.388.14.2.3.5.10.1		not-accessible	Description.
STR wsSwDhcpSvrPoolClassPoolName	1.3.6.1.4.1.388.14.2.3.5.10.1.1	DisplayString	read-only	DHCP Server pool name pool name along with class name indexes into pool class table
STR wsSwDhcpSvrPoolClassName	1.3.6.1.4.1.388.14.2.3.5.10.1.2	DisplayString	read-only	Dhcp Server class name pool name along with class name indexes into pool class table
IP wsSwDhcpSvrPoolClassFirstLowIP	1.3.6.1.4.1.388.14.2.3.5.10.1.3	IpAddress	read-create	Pool Class First Address Range: Low Address
IP wsSwDhcpSvrPoolClassFirstHighIP	1.3.6.1.4.1.388.14.2.3.5.10.1.4	IpAddress	read-create	Pool Class First Address Range: High Address
IP wsSwDhcpSvrPoolClassSecLowIP	1.3.6.1.4.1.388.14.2.3.5.10.1.5	IpAddress	read-create	Pool Class Second Address Range: Low Address
IP wsSwDhcpSvrPoolClassSecHighIP	1.3.6.1.4.1.388.14.2.3.5.10.1.6	IpAddress	read-create	Pool Class Second Address Range: High Address
IP wsSwDhcpSvrPoolClassThirdLowIP	1.3.6.1.4.1.388.14.2.3.5.10.1.7	IpAddress	read-create	Pool Class Third Address Range: Low Address
IP wsSwDhcpSvrPoolClassThirdHighIP	1.3.6.1.4.1.388.14.2.3.5.10.1.8	IpAddress	read-create	Pool Class Third Address Range: High Address
IP wsSwDhcpSvrPoolClassFourthLowIP	1.3.6.1.4.1.388.14.2.3.5.10.1.9	IpAddress	read-create	Pool Class Fourth Address Range: Low Address
IP wsSwDhcpSvrPoolClassFourthHighIP	1.3.6.1.4.1.388.14.2.3.5.10.1.10	IpAddress	read-create	Pool Class Fourth Address Range: High Address
ABB wsSwDhcpSvrPoolClassRowStatus	1.3.6.1.4.1.388.14.2.3.5.10.1.11	AbbrevRowStatus	read-create	Row Status of DHCP Server Pool Class Table
wsSwDhcpDynamicBindingStatusTable	1.3.6.1.4.1.388.14.2.3.5.11		not-accessible	Dynamic bindings tables. This gives list of Active DHCP clients who obtained IP Address from onboard DHCP Server's dynamic pool.
wsSwDhcpDynamicBindingStatusEntry	1.3.6.1.4.1.388.14.2.3.5.11.1		not-accessible	Description.
IP wsSwDhcpDynamicBindingStatusIp	1.3.6.1.4.1.388.14.2.3.5.11.1.1	IpAddress	read-only	IP Address of DHCP client.
PHY wsSwDhcpDynamicBindingStatusHardwareAddr	1.3.6.1.4.1.388.14.2.3.5.11.1.2	PhysAddress	read-only	Hardware Address of DHCP client.
DAT wsSwDhcpDynamicBindingStatusLeaseExpiry	1.3.6.1.4.1.388.14.2.3.5.11.1.3	DateAndTime	read-only	Lease Expiry time of DHCP client.
ABB wsSwDhcpDynamicBindingStatusRowStatus	1.3.6.1.4.1.388.14.2.3.5.11.1.4	AbbrevRowStatus	read-create	Only deletion of rows are permitted.
wsSwDhcpSvrDDNSTable	1.3.6.1.4.1.388.14.2.3.5.12		not-accessible	DDNS bindings Table. This gives list of IP - Name bindings which onboard DHCP Server has updated with external DDNS Server.
wsSwDhcpSvrDDNSEntry	1.3.6.1.4.1.388.14.2.3.5.12.1		not-accessible	Description.
IP wsSwDhcpSvrDDNSAddress	1.3.6.1.4.1.388.14.2.3.5.12.1.1	IpAddress	read-only	The IP address of the DHCP client for which the switch has sent DDNS update.
STR wsSwDhcpSvrDDNSName	1.3.6.1.4.1.388.14.2.3.5.12.1.2	DisplayString	read-only	The Fully qualified domain name of the DHCP client with which the switch has sent DDNS update.
wsSwDhcpServerMIBConformance	1.3.6.1.4.1.388.14.2.3.5.100
wsSwDhcpServerCompliances	1.3.6.1.4.1.388.14.2.3.5.100.2
wsSwDhcpServerCompliance	1.3.6.1.4.1.388.14.2.3.5.100.2.1			Description.
wsSwDhcpServerGroups	1.3.6.1.4.1.388.14.2.3.5.100.3
wsSwDhcpServerGroup	1.3.6.1.4.1.388.14.2.3.5.100.3.1			Description.
wsSwDhcpServerDeprecatedGroup	1.3.6.1.4.1.388.14.2.3.5.100.3.2			Description.

RFC description

Manages Symbol Technologies wireless switch embedded DHCP server address pool, lease assignments, and exclusions.

Start monitoring Symbol Technologies / Motorola WS-series wireless switch (embedded DHCP-server pool/lease status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WS-SW-DHCPSERVER-MIB

What Is WS-SW-DHCPSERVER-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description