WS-INFRA-FILE-MGMT-MIB

All MIBs › WS-INFRA-FILE-MGMT-MIB

Organization: Symbol Technologies

Last Updated: 2006-10-06

Category: Symbol Technologies Wireless

Description: Manages Symbol Technologies wireless infrastructure file transfer, configuration backup, and storage operations.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WS-INFRA-FILE-MGMT-MIB?

WS-INFRA-FILE-MGMT-MIB is a Symbol Technologies enterprise MIB for managing file transfer operations on a wireless switch/controller infrastructure, covering firmware upgrades, configuration backup, and restore operations. It exposes objects related to file transfer sessions, such as the operation type (upload/download), transfer status, and target file, rather than sensor-style hardware telemetry. It supports monitoring the software status of the device by revealing whether a firmware upgrade or configuration backup/restore job is in progress, has completed, or has failed, which is critical operational state during maintenance windows. As part of Symbol's broader WS-* wireless-switch MIB family it is meant to be used alongside sibling infrastructure MIBs rather than independently. It is deployed in enterprise wireless LAN environments where administrators push firmware updates or back up configuration to/from a Symbol wireless switch and need to confirm the transfer succeeded before rebooting the unit. Network engineers evaluating or troubleshooting this functionality can download the WS-INFRA-FILE-MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WS-INFRA-FILE-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Symbol Technologies/Motorola/Zebra wireless switch controller and infrastructure

Monitoring Examples

No concrete object names were supplied for this MIB (its module description was only a placeholder), so a specific object-level scenario cannot be honestly given beyond its stated file-transfer/firmware-management purpose. In general use, an admin initiating a firmware upgrade would expect to poll a transfer-status object until it reports success or failure, avoiding a reboot into a partially transferred image.

What Can Be Monitored

firmware transfer status
configuration backup/restore status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
TruthValue

From WS-SMI

wsInfra

OBJECT-IDENTITY

From WS-TYPE-MIB

DoActionNow

How to Use in IPNetwork Monitor

Example using wsInfraImgUpdCounter OID:

Select a Symbol Technologies/Motorola/Zebra wireless switch controller and infrastructure (firmware/config transfer job-status status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type wsInfraImgUpdCounter into the Find box to locate it in the OID tree, then select it and click OK. It is a gauge counter which will be increased by every file trasfer action. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
wsInfraFileMgmt	1.3.6.1.4.1.388.14.1.2
wsInfraFileMgmtModule	1.3.6.1.4.1.388.14.1.2.1			Description.
wsInfraFileMgmtDir	1.3.6.1.4.1.388.14.1.2.1.1
STR wsInfraFileMgmtDirString	1.3.6.1.4.1.388.14.1.2.1.1.1	DisplayString	read-write	current working directory
STR wsInfraFIleMgmtDirError	1.3.6.1.4.1.388.14.1.2.1.1.2	DisplayString	read-only	error of changing the current working directory
wsInfraFileTable	1.3.6.1.4.1.388.14.1.2.1.2		not-accessible	local file table
wsInfraFileEntry	1.3.6.1.4.1.388.14.1.2.1.2.1		not-accessible	local file table entry
INT wsInfraFileIndex	1.3.6.1.4.1.388.14.1.2.1.2.1.1	INTEGER	accessible-for-notify	simple index for file table
STR wsInfraFileName	1.3.6.1.4.1.388.14.1.2.1.2.1.2	DisplayString	read-only	file name
INT wsInfraFileType	1.3.6.1.4.1.388.14.1.2.1.2.1.3	INTEGER	read-only	file type
I32 wsInfraFileSize	1.3.6.1.4.1.388.14.1.2.1.2.1.4	Integer32	read-only	file size
STR wsInfraFilePerm	1.3.6.1.4.1.388.14.1.2.1.2.1.5	DisplayString	read-only	permission of the file
DAT wsInfraFileCreateDate	1.3.6.1.4.1.388.14.1.2.1.2.1.6	DateAndTime	read-only	file creation date
DAT wsInfraFileModDate	1.3.6.1.4.1.388.14.1.2.1.2.1.7	DateAndTime	read-only	file modification date
wsInfraFileMgmtImageTable	1.3.6.1.4.1.388.14.1.2.1.3		not-accessible	Description.
wsInfraFileMgmtImageEntry	1.3.6.1.4.1.388.14.1.2.1.3.1		not-accessible	Description.
INT wsInfraFileMgmtImageIndex	1.3.6.1.4.1.388.14.1.2.1.3.1.1	INTEGER	accessible-for-notify	simple index of image table
STR wsInfraFileMgmtImageVersion	1.3.6.1.4.1.388.14.1.2.1.3.1.2	DisplayString	read-only	version of the image
T/F wsInfraFileMgmtImageUseNow	1.3.6.1.4.1.388.14.1.2.1.3.1.3	TruthValue	read-only	indicate if it is used by the system
T/F wsInfraFileMgmtImageUseOnBoot	1.3.6.1.4.1.388.14.1.2.1.3.1.4	TruthValue	read-write	indicate if it is used on the reboot
DAT wsInfraFileMgmtImageBuildTime	1.3.6.1.4.1.388.14.1.2.1.3.1.5	DateAndTime	read-only	image build time
DAT wsInfraFileMgmtImageInstallTime	1.3.6.1.4.1.388.14.1.2.1.3.1.6	DateAndTime	read-only	image install time
wsInfraImgUpd	1.3.6.1.4.1.388.14.1.2.1.4
STR wsInfraImgUpdFile	1.3.6.1.4.1.388.14.1.2.1.4.1	DisplayString	read-write	image update file, The location can be specified as tftp:///path/imgfile or ftp://:@/path/imgfile
INT wsInfraImgUpdStart	1.3.6.1.4.1.388.14.1.2.1.4.2	INTEGER	read-write	network file transfer start, set this value to 1 means starting imgUpdate, set to 2 means aborting img update. If there is no imgUpdate, the back end will set this value to idle.
DOA wsInfraImgUpdStatus	1.3.6.1.4.1.388.14.1.2.1.4.3	DoActionState	read-only	status of the file transfer, the possible values are success(1), failure(2) and inProgress. We may need to add more failure return codes in the future.
STR wsInfraImgUpdLastFailedReason	1.3.6.1.4.1.388.14.1.2.1.4.4	DisplayString	read-only	last fileTransfer/imageUpdate failed reason
C32 wsInfraImgUpdCounterEx	1.3.6.1.4.1.388.14.1.2.1.4.5	Counter32	read-only	it is a gauge counter which will be increased by every file trasfer action
wsInfraFileManage	1.3.6.1.4.1.388.14.1.2.1.5
STR wsInfraFileManageSrc	1.3.6.1.4.1.388.14.1.2.1.5.1	DisplayString	read-write	name of the src file
STR wsInfraFileManageDest	1.3.6.1.4.1.388.14.1.2.1.5.2	DisplayString	read-write	name of the dest file
INT wsInfraFileManageStart	1.3.6.1.4.1.388.14.1.2.1.5.3	INTEGER	read-write	local file management start, setting this value to 1 means copy, 2 means delete, 3 means rename, 4 means rmdir, 5 mean mkdir, and when there is no local file management, the back end will set this value to idle. copy/rename, both src and dest need to be specified delete/rmdir/mkdir, only src needs to be specified Files: flash:/path/file nvram:startup-config system:running-config URLs: tftp:///path/file ftp://:@/path/file scp://@/path/file
DOA wsInfraFileManageStatus	1.3.6.1.4.1.388.14.1.2.1.5.4	DoActionState	read-only	state of the file manage, success,failure, or inProgress
STR wsInfraFileManageLastFailedReason	1.3.6.1.4.1.388.14.1.2.1.5.5	DisplayString	read-only	file manage last failed reason.
C32 wsInfraFileManageCounter	1.3.6.1.4.1.388.14.1.2.1.5.6	Counter32	read-only	a guage counter which will be increased by the file manager action
T/F wsInfraFileImgUpdFailOver	1.3.6.1.4.1.388.14.1.2.1.6	TruthValue	read-write	if there is an error in img reboot, this attribute instucts the system to do failover or not.It is simply a truth value.
wsInfraCfgManage	1.3.6.1.4.1.388.14.1.2.1.7
T/F wsInfraCfgManageRunningCfgChangedFlag	1.3.6.1.4.1.388.14.1.2.1.7.1	TruthValue	read-only	This is a Boolean variable indicating if the Running Config is different from the Saved Config. It indicates that there are pending changes that have not been saved yet, but the switch is functioning with a config that is different from Saved Config.
OCT wsInfraCfgManageSavedCfgChecksum	1.3.6.1.4.1.388.14.1.2.1.7.2	OCTET STRING	read-only	The checksum of the Saved Config text.
OCT wsInfraCfgManageRunningCfgChecksum	1.3.6.1.4.1.388.14.1.2.1.7.3	OCTET STRING	read-only	The checksum of the Running Config text.
OCT wsInfraCfgManageResultantChecksum	1.3.6.1.4.1.388.14.1.2.1.7.4	OCTET STRING	read-only	When FileManageStart is set to compute Saved Config or Running Config Checksum, this variable holds the resultant checksum when the computation is done
wsInfraFileMgmtPatchTable	1.3.6.1.4.1.388.14.1.2.1.8		not-accessible	Table of patch names applied to build.
wsInfraFileMgmtPatchEntry	1.3.6.1.4.1.388.14.1.2.1.8.1		not-accessible	Patch table entry.
STR wsInfraFileMgmtPatchIndex	1.3.6.1.4.1.388.14.1.2.1.8.1.1	DisplayString	accessible-for-notify	Index using same value as wsInfraFileMgmtPatchName.
STR wsInfraFileMgmtPatchName	1.3.6.1.4.1.388.14.1.2.1.8.1.2	DisplayString	read-write	Name of patch.
STR wsInfraFileMgmtPatchVersion	1.3.6.1.4.1.388.14.1.2.1.8.1.3	DisplayString	read-write	Version of patch in regex format [0-9]\.[0-9]
wsInfraFSTable	1.3.6.1.4.1.388.14.1.2.1.9		not-accessible	Table of file systems
wsInfraFSEntry	1.3.6.1.4.1.388.14.1.2.1.9.1		not-accessible	Description.
I32 wsInfraFSIndex	1.3.6.1.4.1.388.14.1.2.1.9.1.1	Integer32	accessible-for-notify	Simple index of file system
STR wsInfraFSName	1.3.6.1.4.1.388.14.1.2.1.9.1.2	DisplayString	read-only	Name of file system
T/F wsInfraFSAvailable	1.3.6.1.4.1.388.14.1.2.1.9.1.3	TruthValue	read-only	Indicates if file system is available (e.g. if removeable devices are plugged in) or not
T/F wsInfraFSFormatted	1.3.6.1.4.1.388.14.1.2.1.9.1.4	TruthValue	read-only	Indicates if file system is formatted or not
DOA wsInfraFSFormat	1.3.6.1.4.1.388.14.1.2.1.9.1.5	DoActionNow	read-write	Command to format the file system.
INT wsInfraFileMgmtImportStatus	1.3.6.1.4.1.388.14.1.2.1.10	INTEGER	read-only	Status of the CGI import operation.
wsInfraFileMgmtMIBConformance	1.3.6.1.4.1.388.14.1.2.1.100
wsInfraFileMgmtMIBGroups	1.3.6.1.4.1.388.14.1.2.1.100.1
wsInfraFileMgmtGroup	1.3.6.1.4.1.388.14.1.2.1.100.1.1			Description.
wsInfraFileMgmtMIBCompliances	1.3.6.1.4.1.388.14.1.2.1.100.2
wsInfraFileMgmtMIBCompliance	1.3.6.1.4.1.388.14.1.2.1.100.2.1			Description.

RFC description

A Ciena WhiteScape (Converged Campus) infrastructure file management MIB. Provides SNMP support for file system management and infrastructure file operations on Ciena WS platforms.

Start monitoring Symbol Technologies/Motorola/Zebra wireless switch controller and infrastructure (firmware/config transfer job-status status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WS-INFRA-FILE-MGMT-MIB