All MIBs › WLSR-AP-MIB
Organization: Aruba Wireless Networks
Last Updated: 2008-04-16
Category: Aruba Wireless Networking
Description:
Monitors Aruba wireless LAN access point radio status, client associations, and RF signal quality metrics.
Imported Objects
From ARUBA-MIB
| wlsrEnterpriseMibModules | OBJECT-IDENTITY |
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TEXTUAL-CONVENTION | |
| snmpModules |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| PhysAddress | |
| RowStatus | |
| StorageType | |
| TAddress | |
| TDomain | |
| TestAndIncr | |
| TimeInterval | |
| TruthValue |
What Is WLSR-AP-MIB?
WLSR-AP-MIB is a proprietary MIB, per its module description used for managing Access Points and Air Monitors, placing it in the enterprise wireless LAN intrusion-detection (WIDS/WIPS) technology area rather than general AP radio configuration. Its objects are oriented around detected wireless security events: a target AP's BSSID/SSID/channel, the frame type observed, source/receiver/transmitter and matched MAC/IP addresses, and the name of the signature that matched. It supports monitoring the software-detected security status of the wireless environment — rogue AP detection and signature-matched attack events — rather than classic hardware sensors like temperature or power supply state. It works alongside a base AP/Air Monitor MIB that presumably exposes standard radio/hardware operational objects, since this module supplies only the intrusion-detection trap/alert data. It is typically deployed in enterprise WLAN environments using dedicated Access Points and Air Monitor sensors for RF security monitoring. Engineers can download the WLSR-AP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WLSR-AP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- detected wireless intrusion signature matches
- target/rogue AP BSSID and SSID
- matched MAC/IP addresses of offending devices
- wireless frame type of the detected event
Supported Devices
- Wireless LAN Access Point / Air Monitor (WIDS/WIPS-capable enterprise WLAN system)
Monitoring Examples
When a wireless intrusion-detection trap fires from wlsrTrapObjectsGroup, an administrator would inspect wlsrSignatureName and wlsrMatchedMac/wlsrMatchedIp to identify which device triggered the match, cross-referencing wlsrTargetApBSSID and wlsrTargetApSSID to see which AP was targeted. Examining wlsrTransmitterMac/wlsrReceiverMac and wlsrFrameType would help pinpoint whether the event indicates a rogue AP or an active wireless attack in progress.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| wlsrMIB | 1.3.6.1.4.1.14823.2.3.1.1 | This MIB is for managing the Access Points and Air Monitors. | ||
| wlsrConfigGroup | 1.3.6.1.4.1.14823.2.3.1.1.1 | |||
| wlsrConfigTable | 1.3.6.1.4.1.14823.2.3.1.1.1.1 | not-accessible | Table will list the configuration data of a wifi interface. | |
| wlsrConfigEntry | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1 | not-accessible | A Wifi configuration entry | |
| MAC wlsrBSSID | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.1 | MacAddress | not-accessible | BSSID of the WIFI Interface |
| STR wlsrESSID | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.2 | DisplayString | read-only | ESSID of the WIFI Interface |
| INT wlsrMode | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.3 | INTEGER | read-only | Mode of the Access Point. Master indicates that we are operating as Access Point. monitor indicates that the AP is an Air Monitor. |
| INT wlsrCurrentChannel | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.4 | INTEGER | read-only | The current operating frequency channel of the DSSS PHY. |
| I32 wlsrTxPower | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.5 | Integer32 | read-only | Transmit power of the Access point. The value is between 0 ... 4 |
| INT wlsrRTSThreshold | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.6 | INTEGER | read-only | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. |
| INT wlsrRetryLimit | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.7 | INTEGER | read-only | This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7. |
| INT wlsrPreamble | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.8 | INTEGER | read-only | The current radio preamble type in use by the wifi interface. |
| INT wlsrBeaconInterval | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.9 | INTEGER | read-only | This object shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames. |
| INT wlsrPowerMgmt | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.10 | INTEGER | read-only | This attribute indicates whether Power Management is enabled or not. |
| INT wlsrLoadBalance | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.11 | INTEGER | read-only | This attribute indicates if load balancing is enabled or disabled. |
| BIT wlsrSupportedRates | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12 | Bits | read-only | Basic Bit rates supported by this WIFI interface. |
| INT wlsrDTIMPeriod | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13 | INTEGER | read-only | This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. |
| IP wlsrLMSAddress | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14 | IpAddress | read-only | This attribute indicates the IP Address of the Local switch that the AP is connected to. |
| BIT wlsrEncryption | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15 | Bits | read-only | This attribute indicates the Encryption type of the WIFI interface. |
| T/F wlsrStatus | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17 | TruthValue | read-only | This attribute indicates the status of the WIFI Interface. |
| I32 wlsrAgeout | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18 | Integer32 | read-only | This attribute indicates the ageout value in seconds. |
| INT wlsrMTU | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.19 | INTEGER | read-only | This attribute indicates the MTU of the WIFI Interface. |
| STR wlsrLocation | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.20 | DisplayString | read-only | This attribute indicates the Location of the Access Point in Building.Floor.location format. |
| T/F wlsrHideSSID | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.21 | TruthValue | read-only | This attribute indicates if SSID is hidden or not. |
| T/F wlsrDenyBroadcast | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.22 | TruthValue | read-only | A True value indicates that Broadcast is disabled. |
| INT wlsrBGmode | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.23 | INTEGER | read-only | This attributes indicates the mode of the WIFI Interface |
| INT wlsrCardType | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.24 | INTEGER | read-only | Indicates the type of the radio card. |
| I32 wlsrRegDomain | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.25 | Integer32 | read-only | This Object represents the configured Regulatory Domain this AP will adhere to. 1 -- US 2 -- JAPAN 3 -- EU 4 -- EU2 5 -- EU3 6 -- KOREA 7 -- CHINA 8 -- France 9 -- Singapore 10 -- MALAY 11 -- BRAZIL 12 -- Taiwan 13 -- Czech Republic 14 -- GR 15 -- South Africa 16 -- Argentina 17 -- Australia 18 -- Chile |
| STR wlsrCountryCode | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.26 | DisplayString | read-only | This Object represents the configured Country code . |
| BIT wlsrTxRates | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.27 | Bits | read-only | Transmit Bit rates supported by this WIFI interface. |
| wlsrStatsGroup | 1.3.6.1.4.1.14823.2.3.1.1.3 | |||
| wlsrStatsChannelGroup | 1.3.6.1.4.1.14823.2.3.1.1.3.3 | |||
| wlsrChannelStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1 | not-accessible | Table contains the Channel Statistics. | |
| wlsrChannelStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1 | not-accessible | Channel Statistics Table | |
| INT wlsrChStatsChannel | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.1 | INTEGER | not-accessible | The frequency Channel on which these statistics are collected. |
| I32 wlsrChStatsNumAPs | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.2 | Integer32 | read-only | This attribute indicates the number of APs using this channel. |
| I32 wlsrChStatsNumStations | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.3 | Integer32 | read-only | This attribute indicates the number of stations using this channel. |
| C32 wlsrChStatsTotPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.4 | Counter32 | read-only | This attribute indicates the total packets observed on this channel. |
| C32 wlsrChStatsTotBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.5 | Counter32 | read-only | This attribute indicates the total Bytes observed on this channel. |
| C32 wlsrChStatsTotRetryPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.6 | Counter32 | read-only | This attribute indicates the total Retry Packets observed on this channel. |
| C32 wlsrChStatsTotFragmentedPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.7 | Counter32 | read-only | This attribute indicates the total Fragmented Packets observed on this channel. |
| C32 wlsrChStatsTotPhyErrPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.8 | Counter32 | read-only | This attribute indicates the total Physical Error Packets observed on this channel. |
| C32 wlsrChStatsTotMacErrPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.9 | Counter32 | read-only | This attribute indicates the total Mac errors packets observed on this channel. |
| I32 wlsrChStatsFrameErrorRate | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.10 | Integer32 | read-only | Frame errors as a percentage of total frames on this channel. |
| I32 wlsrChStatsFrameRetryRate | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.11 | Integer32 | read-only | The Frame Retry Rate |
| I32 wlsrChStatsFrameLowSpeedRate | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.12 | Integer32 | read-only | Frame Low speed error rate in kbps. |
| I32 wlsrChStatsFrameNonUnicastRate | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.13 | Integer32 | read-only | Frame non Unicast rate in kbps. |
| I32 wlsrChStatsFrameBandwidthRate | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.14 | Integer32 | read-only | Frame Bandwidth rate in kbps. |
| I32 wlsrChStatsFrameFragmentationRate | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.15 | Integer32 | read-only | Frame Fragmentation Rate in kbps. |
| TIK wlsrChStatsMonitoredTime | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.16 | TimeTicks | read-only | Time in ticks, since we were observing this channel. |
| wlsrChannelRateStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2 | not-accessible | This table contains all the per channel Packet and Byte Counts but represented in terms of rate categories. | |
| wlsrChannelRateStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1 | not-accessible | Channel Rate Statistics. | |
| C32 wlsrChStatsTotPktsAt1Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.1 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 1Mbps rate. |
| C32 wlsrChStatsTotBytesAt1Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.2 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 1Mbps rate. |
| C32 wlsrChStatsTotPktsAt2Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.3 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 2Mbps rate. |
| C32 wlsrChStatsTotBytesAt2Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.4 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 2Mbps rate. |
| C32 wlsrChStatsTotPktsAt5Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.5 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 5Mbps rate. |
| C32 wlsrChStatsTotBytesAt5Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.6 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 5Mbps rate. |
| C32 wlsrChStatsTotPktsAt11Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.7 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 11Mbps rate. |
| C32 wlsrChStatsTotBytesAt11Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.8 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 11Mbps rate. |
| C32 wlsrChStatsTotPktsAt6Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.9 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 6Mbps rate. |
| C32 wlsrChStatsTotBytesAt6Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.10 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 6Mbps rate. |
| C32 wlsrChStatsTotPktsAt12Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.11 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 12Mbps rate. |
| C32 wlsrChStatsTotBytesAt12Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.12 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 12Mbps rate. |
| C32 wlsrChStatsTotPktsAt18Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.13 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 18Mbps rate. |
| C32 wlsrChStatsTotBytesAt18Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.14 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 18Mbps rate. |
| C32 wlsrChStatsTotPktsAt24Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.15 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 24Mbps rate. |
| C32 wlsrChStatsTotBytesAt24Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.16 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 24Mbps rate. |
| C32 wlsrChStatsTotPktsAt36Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.17 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 36Mbps rate. |
| C32 wlsrChStatsTotBytesAt36Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.18 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 36Mbps rate. |
| C32 wlsrChStatsTotPktsAt48Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.19 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 48Mbps rate. |
| C32 wlsrChStatsTotBytesAt48Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.20 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 48Mbps rate. |
| C32 wlsrChStatsTotPktsAt54Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.21 | Counter32 | read-only | This attribute indicates the total number of packets observed on this channel at 54Mbps rate. |
| C32 wlsrChStatsTotBytesAt54Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.22 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this channel at 54Mbps rate. |
| wlsrChannelDATypeStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3 | not-accessible | This table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type. | |
| wlsrChannelDATypeStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1 | not-accessible | Channel Statistics based on the Address Type. | |
| C32 wlsrChStatsTotDABroadcastPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.1 | Counter32 | read-only | This attribute indicates the total number of Broadcast packets observed on this channel. |
| C32 wlsrChStatsTotDABroadcastBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.2 | Counter32 | read-only | This attribute indicates the total number of Broadcast Bytes observed on this channel. |
| C32 wlsrChStatsTotDAMulticastPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.3 | Counter32 | read-only | This attribute indicates the total number of Multicast packets observed on this channel. |
| C32 wlsrChStatsTotDAMulticastBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.4 | Counter32 | read-only | This attribute indicates the total number of Multicast Bytes observed on this channel. |
| C32 wlsrChStatsTotDAUnicastPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.5 | Counter32 | read-only | This attribute indicates the total number of Unicast packets observed on this channel. |
| C32 wlsrChStatsTotDAUnicastBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.6 | Counter32 | read-only | This attribute indicates the total number of Unicast Bytes observed on this channel. |
| wlsrChannelFrameTypeStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4 | not-accessible | This table contains all the per channel Packet and Byte Counts but broken down into different Frame Types. | |
| wlsrChannelFrameTypeStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1 | not-accessible | Channel Statistics based on Frame Type. | |
| C32 wlsrChStatsTotMgmtPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.1 | Counter32 | read-only | This attribute indicates the total number of Management packets observed on this channel. |
| C32 wlsrChStatsTotMgmtBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.2 | Counter32 | read-only | This attribute indicates the total number of Management Bytes observed on this channel. |
| C32 wlsrChStatsTotCtrlPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.3 | Counter32 | read-only | This attribute indicates the total number of Control packets observed on this channel. |
| C32 wlsrChStatsTotCtrlBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.4 | Counter32 | read-only | This attribute indicates the total number of Control Bytes observed on this channel. |
| C32 wlsrChStatsTotDataPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.5 | Counter32 | read-only | This attribute indicates the total number of Data packets observed on this channel. |
| C32 wlsrChStatsTotDataBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.6 | Counter32 | read-only | This attribute indicates the total number of Data Bytes observed on this channel. |
| wlsrChannelPktSizeStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5 | not-accessible | This table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes. | |
| wlsrChannelPktSizeStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1 | not-accessible | Channel Statistics based on the packet sizes. | |
| C32 wlsrChStatsPkts63Bytes | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.1 | Counter32 | read-only | This attribute indicates the total number of packets that were less than 64 bytes long. |
| C32 wlsrChStatsPkts64To127 | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.2 | Counter32 | read-only | This attribute indicates the total number of packets that were between 64 and 127 bytes long. |
| C32 wlsrChStatsPkts128To255 | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.3 | Counter32 | read-only | This attribute indicates the total number of packets that were between 128 and 255 bytes long. |
| C32 wlsrChStatsPkts256To511 | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.4 | Counter32 | read-only | This attribute indicates the total number of packets that were between 256 and 511 bytes long. |
| C32 wlsrChStatsPkts512To1023 | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.5 | Counter32 | read-only | This attribute indicates the total number of packets that were between 512 and 1023 bytes long. |
| C32 wlsrChStatsPkts1024To1518 | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.6 | Counter32 | read-only | This attribute indicates the total number of packets that were between 1024 and 1518 bytes long. |
| wlsrStatsStaGroup | 1.3.6.1.4.1.14823.2.3.1.1.3.4 | |||
| wlsrStaStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1 | not-accessible | This Table contains all the Aggregate statistics collected for a station. | |
| wlsrStaStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1 | not-accessible | Station Statistics. | |
| MAC wlsrStaAddress | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.1 | MacAddress | not-accessible | Mac Address of the Station connected to this Access Point. |
| C32 wlsrStaTxPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.2 | Counter32 | read-only | This attribute indicates the total packets Transmitted to the Station. |
| C32 wlsrStaTxBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.3 | Counter32 | read-only | This attribute indicates the total Bytes Transmitted to the Station. |
| C32 wlsrStaRxPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.4 | Counter32 | read-only | This attribute indicates the total packets Received from the Station. |
| C32 wlsrStaRxBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.5 | Counter32 | read-only | This attribute indicates the total Bytes Received from the Station. |
| C32 wlsrStaTxRetryPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.6 | Counter32 | read-only | This attribute indicates the Retry Packets transmitted by the station |
| C32 wlsrStaRxRetryPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.7 | Counter32 | read-only | This attribute indicates the Retry Packets received from the station |
| C32 wlsrStaTxFragmentedPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.8 | Counter32 | read-only | This attribute indicates the Fragmented Packets transmitted by the station. |
| C32 wlsrStaRxFragmentedPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.9 | Counter32 | read-only | This attribute indicates the Fragmented Packets Received from the station. |
| C32 wlsrStaReceiveErrPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.10 | Counter32 | read-only | This attribute indicates the total Error Packets received from this station. |
| I32 wlsrStaTxTotSignal | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.11 | Integer32 | read-only | The attribute indicates the total transmitted signal computed for this station. |
| C32 wlsrStaTxSignalPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.12 | Counter32 | read-only | This attribute indicates the total Signal Packets transmitted by this station. |
| I32 wlsrStaTxCurSignal | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.13 | Integer32 | read-only | This attribute indicate the stations current transmit signal strength. |
| I32 wlsrStaTxHighSignal | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.14 | Integer32 | read-only | This attribute indicate the stations high transmit signal strength. |
| C32 wlsrStaRxTotNoise | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.15 | Counter32 | read-only | Total Noise. |
| C32 wlsrStaRxNoisePkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.16 | Counter32 | read-only | Received Noise. |
| I32 wlsrStaRxCurrentNoise | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.17 | Integer32 | read-only | Current Noise. |
| I32 wlsrStaRxHighNoise | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.18 | Integer32 | read-only | High Noise |
| I32 wlsrStaRxLowNoise | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.19 | Integer32 | read-only | Low Noise |
| I32 wlsrStaFrameRetryRate | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.20 | Integer32 | read-only | Station Frame Retry Rate in kbps. |
| I32 wlsrStaFrameLowSpeedRate | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.21 | Integer32 | read-only | Station Frame Low speed error rate in kbps. |
| I32 wlsrStaFrameNonUnicastRate | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.22 | Integer32 | read-only | Station Frame Non Unicast rate in kbps. |
| I32 wlsrStaFrameRetryErrorRate | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.23 | Integer32 | read-only | Station Frame Retry Error Rate in kbps. |
| I32 wlsrStaFrameBandwidthRate | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.24 | Integer32 | read-only | Station Frame Bandwidth rate in kbps. |
| I32 wlsrStaFrameFragmentationRate | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.25 | Integer32 | read-only | Station Frame Fragmentation Rate in kbps. |
| I32 wlsrStaFrameHighBandwidthRate | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.26 | Integer32 | read-only | Station Frame High Bandwidth Rate in kbps. |
| wlsrStaRateStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2 | not-accessible | This table contains all the per channel Packet and Byte Counts but represented in terms of rate categories. | |
| wlsrStaRateStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1 | not-accessible | Station Rate Stats Table | |
| C32 wlsrStaTxPktsAt1Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.1 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 1Mbps rate. |
| C32 wlsrStaTxBytesAt1Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.2 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 1Mbps rate. |
| C32 wlsrStaTxPktsAt2Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.3 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 2Mbps rate. |
| C32 wlsrStaTxBytesAt2Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.4 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 2Mbps rate. |
| C32 wlsrStaTxPktsAt5Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.5 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 5Mbps rate. |
| C32 wlsrStaTxBytesAt5Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.6 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 5Mbps rate. |
| C32 wlsrStaTxPktsAt11Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.7 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 11Mbps rate. |
| C32 wlsrStaTxBytesAt11Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.8 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 11Mbps rate. |
| C32 wlsrStaTxPktsAt6Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.9 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 6Mbps rate. |
| C32 wlsrStaTxBytesAt6Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.10 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 6Mbps rate. |
| C32 wlsrStaTxPktsAt12Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.11 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 12Mbps rate. |
| C32 wlsrStaTxBytesAt12Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.12 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 12Mbps rate. |
| C32 wlsrStaTxPktsAt18Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.13 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 18Mbps rate. |
| C32 wlsrStaTxBytesAt18Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.14 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 18Mbps rate. |
| C32 wlsrStaTxPktsAt24Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.15 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 24Mbps rate. |
| C32 wlsrStaTxBytesAt24Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.16 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 24Mbps rate. |
| C32 wlsrStaTxPktsAt36Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.17 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 36Mbps rate. |
| C32 wlsrStaTxBytesAt36Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.18 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 36Mbps rate. |
| C32 wlsrStaTxPktsAt48Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.19 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 48Mbps rate. |
| C32 wlsrStaTxBytesAt48Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.20 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 48Mbps rate. |
| C32 wlsrStaTxPktsAt54Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.21 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 54Mbps rate. |
| C32 wlsrStaTxBytesAt54Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.22 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 54Mbps rate. |
| C32 wlsrStaRxPktsAt1Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.23 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 1Mbps rate. |
| C32 wlsrStaRxBytesAt1Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.24 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 1Mbps rate. |
| C32 wlsrStaRxPktsAt2Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.25 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 2Mbps rate. |
| C32 wlsrStaRxBytesAt2Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.26 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 2Mbps rate. |
| C32 wlsrStaRxPktsAt5Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.27 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 5Mbps rate. |
| C32 wlsrStaRxBytesAt5Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.28 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 5Mbps rate. |
| C32 wlsrStaRxPktsAt11Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.29 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 11Mbps rate. |
| C32 wlsrStaRxBytesAt11Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.30 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 11Mbps rate. |
| C32 wlsrStaRxPktsAt6Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.31 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 6Mbps rate. |
| C32 wlsrStaRxBytesAt6Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.32 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 6Mbps rate. |
| C32 wlsrStaRxPktsAt12Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.33 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 12Mbps rate. |
| C32 wlsrStaRxBytesAt12Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.34 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 12Mbps rate. |
| C32 wlsrStaRxPktsAt18Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.35 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 18Mbps rate. |
| C32 wlsrStaRxBytesAt18Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.36 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 18Mbps rate. |
| C32 wlsrStaRxPktsAt24Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.37 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 24Mbps rate. |
| C32 wlsrStaRxBytesAt24Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.38 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 24Mbps rate. |
| C32 wlsrStaRxPktsAt36Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.39 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 36Mbps rate. |
| C32 wlsrStaRxBytesAt36Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.40 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 36Mbps rate. |
| C32 wlsrStaRxPktsAt48Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.41 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 48Mbps rate. |
| C32 wlsrStaRxBytesAt48Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.42 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 48Mbps rate. |
| C32 wlsrStaRxPktsAt54Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.43 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 54Mbps rate. |
| C32 wlsrStaRxBytesAt54Mbps | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.44 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 54Mbps rate. |
| wlsrStaDATypeStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3 | not-accessible | This table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type. | |
| wlsrStaDATypeStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1 | not-accessible | Station Statistics based on the Destination Address Type. | |
| C32 wlsrStaTxDABroadcastPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.1 | Counter32 | read-only | This attribute indicates the number of Broadcast packets transmitted by this Station. |
| C32 wlsrStaTxDABroadcastBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.2 | Counter32 | read-only | This attribute indicates the number of Broadcast Bytes transmitted by this Station. |
| C32 wlsrStaTxDAMulticastPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.3 | Counter32 | read-only | This attribute indicates the number of Multicast packets transmitted by this station. |
| C32 wlsrStaTxDAMulticastBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.4 | Counter32 | read-only | This attribute indicates the number of Multicast Bytes transmitted by this station. |
| C32 wlsrStaTxDAUnicastPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.5 | Counter32 | read-only | This attribute indicates the total of Unicast packets transmitted by this station. |
| C32 wlsrStaTxDAUnicastBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.6 | Counter32 | read-only | This attribute indicates the total of Unicast Bytes transmitted by this station. |
| wlsrStaFrameTypeStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4 | not-accessible | This table contains all the per channel Packet and Byte Counts but broken down into different Frame Types. | |
| wlsrStaFrameTypeStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1 | not-accessible | Station Frame Type Stats Entry. | |
| C32 wlsrStaTxMgmtPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.1 | Counter32 | read-only | This attribute indicates the Transmitted Management packets from a station. |
| C32 wlsrStaTxMgmtBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.2 | Counter32 | read-only | This attribute indicates the Transmitted Management Bytes from a station |
| C32 wlsrStaTxCtrlPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.3 | Counter32 | read-only | This attribute indicates the Transmitted Control packets from a station |
| C32 wlsrStaTxCtrlBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.4 | Counter32 | read-only | This attribute indicates the Transmitted Control Bytes from a station |
| C32 wlsrStaTxDataPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.5 | Counter32 | read-only | This attribute indicates the Transmitted Data packets from a station |
| C32 wlsrStaTxDataBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.6 | Counter32 | read-only | This attribute indicates the Transmitted Data Bytes observed on this channel. |
| C32 wlsrStaRxMgmtPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.7 | Counter32 | read-only | This attribute indicates the number of received Management packets at a station. |
| C32 wlsrStaRxMgmtBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.8 | Counter32 | read-only | This attribute indicates the number of received Management Bytes at a station. |
| C32 wlsrStaRxCtrlPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.9 | Counter32 | read-only | This attribute indicates the number of received Control packets at a station. |
| C32 wlsrStaRxCtrlBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.10 | Counter32 | read-only | This attribute indicates the number of received Control Bytes at a station. |
| C32 wlsrStaRxDataPkts | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.11 | Counter32 | read-only | This attribute indicates the number of received Data packets at a station. |
| C32 wlsrStaRxDataBytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.12 | Counter32 | read-only | This attribute indicates the number of received Data Bytes at a station. |
| wlsrStaPktSizeStatsTable | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5 | not-accessible | This table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes. | |
| wlsrStaPktSizeStatsEntry | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1 | not-accessible | Station Packet Size Stats. | |
| C32 wlsrStaTxPkts63Bytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.1 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. |
| C32 wlsrStaTxPkts64To127 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.2 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long. |
| C32 wlsrStaTxPkts128To255 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.3 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long. |
| C32 wlsrStaTxPkts256To511 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.4 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long. |
| C32 wlsrStaTxPkts512To1023 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.5 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long. |
| C32 wlsrStaTxPkts1024To1518 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.6 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. |
| C32 wlsrStaRxPkts63Bytes | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.7 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were less than 64 bytes long. |
| C32 wlsrStaRxPkts64To127 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.8 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long. |
| C32 wlsrStaRxPkts128To255 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.9 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long. |
| C32 wlsrStaRxPkts256To511 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.10 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long. |
| C32 wlsrStaRxPkts512To1023 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.11 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long. |
| C32 wlsrStaRxPkts1024To1518 | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.12 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long. |
| wlsrAirMonitorGroup | 1.3.6.1.4.1.14823.2.3.1.1.4 | |||
| wlsrAirMonitorApListTable | 1.3.6.1.4.1.14823.2.3.1.1.4.1 | not-accessible | This table contains all the Access Points monitored by the AM. | |
| wlsrAirMonitorApListEntry | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1 | not-accessible | Ap List Entry | |
| MAC wlsrAmApBSSID | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.1 | MacAddress | not-accessible | BSSID of the Access Point. |
| STR wlsrAmSSID | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.2 | DisplayString | read-only | This attribute indicates the SSID of the AP. |
| INT wlsrAmChannel | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.3 | INTEGER | read-only | This attribute indicates the channel on which this AP is operating. |
| INT wlsrAmPhysicalType | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.4 | INTEGER | read-only | This attribute indicates the physical layer type. |
| INT wlsrAmAccessPointType | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.5 | INTEGER | read-only | This attribute indicates the type of AP. |
| INT wlsrAmRAPType | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 | INTEGER | read-only | Type of the Access Point. |
| I32 wlsrAmRSSI | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.7 | Integer32 | read-only | Access point Receiver Signal Strength Indicator. |
| TIK wlsrAmMonitoredTime | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.8 | TimeTicks | read-only | Time in ticks, since the AM is observing this access point. |
| TIK wlsrAmInactivityTime | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.9 | TimeTicks | read-only | Access point Inactivity Time. |
| INT wlsrAmLoadBalancing | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.10 | INTEGER | read-only | The attributes indicates whether Load balancing is enabled for this access point. |
| wlsrTrapsGroup | 1.3.6.1.4.1.14823.2.3.1.1.100 | |||
| wlsrTrapObjectsGroup | 1.3.6.1.4.1.14823.2.3.1.1.100.100 | |||
| MAC wlsrTargetApBSSID | 1.3.6.1.4.1.14823.2.3.1.1.100.100.1 | MacAddress | read-only | This Object is used in the traps to indicate the BSSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. |
| STR wlsrTargetApSSID | 1.3.6.1.4.1.14823.2.3.1.1.100.100.2 | DisplayString | read-only | This Object is used in the traps to indicate the SSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. |
| INT wlsrTargetApChannel | 1.3.6.1.4.1.14823.2.3.1.1.100.100.3 | INTEGER | read-only | This Object is used in the traps to indicate the Channel of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. |
| MAC wlsrSourceMac | 1.3.6.1.4.1.14823.2.3.1.1.100.100.4 | MacAddress | read-only | This Object is used in the traps to indicate the MAC address of the Source. |
| MAC wlsrNodeMac | 1.3.6.1.4.1.14823.2.3.1.1.100.100.5 | MacAddress | read-only | This Object is used in the traps to indicate the MAC address of a Node. |
| INT wlsrFrameType | 1.3.6.1.4.1.14823.2.3.1.1.100.100.6 | INTEGER | read-only | This Object is used in the traps to indicate the Frame Type. |
| INT wlsrAddressType | 1.3.6.1.4.1.14823.2.3.1.1.100.100.7 | INTEGER | read-only | This Object is used in the traps to indicate the Address Type. |
| OCT wlsrSignatureName | 1.3.6.1.4.1.14823.2.3.1.1.100.100.8 | OCTET STRING | read-only | This Object is used in the traps to indicate the Signature Name. |
| MAC wlsrMatchedMac | 1.3.6.1.4.1.14823.2.3.1.1.100.100.9 | MacAddress | read-only | This Object is used in the traps to indicate the Macaddress. |
| IP wlsrMatchedIp | 1.3.6.1.4.1.14823.2.3.1.1.100.100.10 | IpAddress | read-only | This Object is used in the traps to indicate the Ip Address. |
| MAC wlsrReceiverMac | 1.3.6.1.4.1.14823.2.3.1.1.100.100.11 | MacAddress | read-only | This Object is used in the traps to indicate the MAC address of the Receiver. |
| MAC wlsrTransmitterMac | 1.3.6.1.4.1.14823.2.3.1.1.100.100.12 | MacAddress | read-only | This Object is used in the traps to indicate the MAC address of the Transmitter. |
| I32 wlsrRSSI | 1.3.6.1.4.1.14823.2.3.1.1.100.100.13 | Integer32 | read-only | This Object is used in the traps to indicate the Signal Strength Indicator. |
| STR wlsrRogueInfoURL | 1.3.6.1.4.1.14823.2.3.1.1.100.100.14 | DisplayString | read-only | This Object is used to point to the WEBGUI Rogue AP information URL. |
| STR wlsrInterferingAPInfoURL | 1.3.6.1.4.1.14823.2.3.1.1.100.100.15 | DisplayString | read-only | This Object is used to point to the WEBGUI Rogue interfering AP information URL. |
| NTF wlsrUnsecureApDetected | 1.3.6.1.4.1.14823.2.3.1.1.100.1001 | This trap indicates that an Unsecure Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. The AP is declared unsecure, because we matched it to the wlsrMatchedMac/wlsrMatchedIp. | ||
| NTF wlsrStaImpersonation | 1.3.6.1.4.1.14823.2.3.1.1.100.1002 | This trap indicates that an AM at location wlsrLocation detected a Station impersonation. | ||
| NTF wlsrReservedChannelViolation | 1.3.6.1.4.1.14823.2.3.1.1.100.1003 | This trap indicates that an Access Point is detected by an AP at location wlsrLocation, which violates the Reserved Channel configuration. | ||
| NTF wlsrValidSSIDViolation | 1.3.6.1.4.1.14823.2.3.1.1.100.1004 | This trap indicates that an Access Point violating Valid SSID is detected by an AP at wlsrLocation. | ||
| NTF wlsrChannelMisconfiguration | 1.3.6.1.4.1.14823.2.3.1.1.100.1005 | This trap indicates that an Access Point has a bad channel configuration. | ||
| NTF wlsrOUIMisconfiguration | 1.3.6.1.4.1.14823.2.3.1.1.100.1006 | This trap indicates that an Access Point has bad OUI configuration. | ||
| NTF wlsrSSIDMisconfiguration | 1.3.6.1.4.1.14823.2.3.1.1.100.1007 | This trap indicates that an Access Point has bad SSID configuration. | ||
| NTF wlsrShortPreableMisconfiguration | 1.3.6.1.4.1.14823.2.3.1.1.100.1008 | This trap indicates that an Access Point has bad Short preamble configuration. | ||
| NTF wlsrWPAMisconfiguration | 1.3.6.1.4.1.14823.2.3.1.1.100.1009 | This trap indicates that an Access Point has bad WPA configuration. | ||
| NTF wlsrAdhocNetworkDetected | 1.3.6.1.4.1.14823.2.3.1.1.100.1010 | This trap indicates that an AM has detected an Adhoc network. | ||
| NTF wlsrStaPolicyViolation | 1.3.6.1.4.1.14823.2.3.1.1.100.1011 | This trap indicates that a Valid Station policy is violated. | ||
| NTF wlsrRepeatWEPIVViolation | 1.3.6.1.4.1.14823.2.3.1.1.100.1012 | This trap indicates that an AP/AM detected a Repeat WEP-IV violation. | ||
| NTF wlsrWeakWEPIVViolation | 1.3.6.1.4.1.14823.2.3.1.1.100.1013 | This trap indicates that an AP/AM detected a Weak WEP-IV violation. | ||
| NTF wlsrChannelInterferenceDetected | 1.3.6.1.4.1.14823.2.3.1.1.100.1014 | This trap indicates that an AM/AP located at wlsrLocation has detected a channel interference on wlsrCurrentChannel. | ||
| NTF wlsrAPInterferenceDetected | 1.3.6.1.4.1.14823.2.3.1.1.100.1015 | This trap indicates that an AM/AP located at wlsrLocation has detected an AP interference on wlsrCurrentChannel. | ||
| NTF wlsrStaInterferenceDetected | 1.3.6.1.4.1.14823.2.3.1.1.100.1016 | This trap indicates that an AM/AP located at wlsrLocation has detected a Station interference on wlsrCurrentChannel. | ||
| NTF wlsrFrameRetryRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1017 | This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Retry Rate for AP wlsrTargetApBSSID. | ||
| NTF wlsrFrameReceiveErrorRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1018 | This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Receive Error Rate for AP wlsrTargetApBSSID. | ||
| NTF wlsrFrameFragmentationRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1019 | This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Fragmentation Rate for AP wlsrTargetApBSSID. | ||
| NTF wlsrFrameBandWidthRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1020 | This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the allocated Bandwidth rate. | ||
| NTF wlsrFrameLowSpeedRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1021 | This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Low speed rate. | ||
| NTF wlsrFrameNonUnicastRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1022 | This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Non Unicast traffic rate. | ||
| NTF wlsrLoadbalancingEnabled | 1.3.6.1.4.1.14823.2.3.1.1.100.1023 | This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has enabled Load balancing. | ||
| NTF wlsrChannelFrameRetryRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1024 | This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Retry Rate. | ||
| NTF wlsrChannelFrameFragmentationRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1025 | This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Fragmentation Rate. | ||
| NTF wlsrChannelFrameErrorRateExceeded | 1.3.6.1.4.1.14823.2.3.1.1.100.1026 | This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Error Rate. | ||
| NTF wlsrSignatureMatch | 1.3.6.1.4.1.14823.2.3.1.1.100.1027 | This trap indicates that we detected a signature match. | ||
| NTF wlsrChannelRateAnomaly | 1.3.6.1.4.1.14823.2.3.1.1.100.1028 | This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the configured IDS rate threshold. | ||
| NTF wlsrNodeRateAnomaly | 1.3.6.1.4.1.14823.2.3.1.1.100.1029 | This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType transmitted by node wlsrNodeMac which exceeds the configured IDS rate threshold. | ||
| NTF wlsrEAPRateAnomaly | 1.3.6.1.4.1.14823.2.3.1.1.100.1030 | This trap indicates that the number of EAP Handshake packets received by an AP/AM at wlsrLocation exceeds the configured IDS EAP Handshake rate. | ||
| NTF wlsrSignalAnomaly | 1.3.6.1.4.1.14823.2.3.1.1.100.1031 | This trap indicates that an AP/AM at wlsrLocation detected a Signal Anomaly on wlsrCurrentChannel. | ||
| NTF wlsrSequenceNumberAnomaly | 1.3.6.1.4.1.14823.2.3.1.1.100.1032 | This trap indicates that an AP/AM at wlsrLocation received packets which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS Configuration object. | ||
| NTF wlsrDisconnectStationAttack | 1.3.6.1.4.1.14823.2.3.1.1.100.1033 | This trap indicates that an AP/AM detected a station Disconnect attack. | ||
| NTF wlsrApFloodAttack | 1.3.6.1.4.1.14823.2.3.1.1.100.1034 | This trap is triggered when the number of spurious AP's detected by an AP/AM at wlsrLocation exceeds the configured IDS threshold. | ||
| NTF wlsrAdhocNetwork | 1.3.6.1.4.1.14823.2.3.1.1.100.1035 | This trap indicates that an AP/AM at wlsrLocation detected an Adhoc Network. Node wlsrSourceMac is connected to an adhoc AP wlsrTargetApBSSID with wlsrTargetApSSID ssid. | ||
| NTF wlsrWirelessBridge | 1.3.6.1.4.1.14823.2.3.1.1.100.1036 | This trap indicates that an AP/AM at wlsrLocation detected a Wireless Bridge. The detected bridge is between wlsrSourceMac and wlsrReceiverMac. | ||
| NTF wlsrInvalidMacOUI | 1.3.6.1.4.1.14823.2.3.1.1.100.1037 | This trap indicates that an AP/AM at wlsrLocation detected an Invalid MAC OUI in transmission from the Node wlsrNodeMac. The invalid mac is the . | ||
| NTF wlsrLoadbalancingDisabled | 1.3.6.1.4.1.14823.2.3.1.1.100.1038 | This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has disabled Load balancing. | ||
| NTF wlsrWEPMisconfiguration | 1.3.6.1.4.1.14823.2.3.1.1.100.1039 | This trap indicates that an Access Point has bad WEP configuration. | ||
| NTF wlsrStaRepeatWEPIVViolation | 1.3.6.1.4.1.14823.2.3.1.1.100.1040 | This trap indicates that an AP/AM detected a Repeat WEP-IV violation. for a Station | ||
| NTF wlsrStaWeakWEPIVViolation | 1.3.6.1.4.1.14823.2.3.1.1.100.1041 | This trap indicates that an AP/AM detected a Weak WEP-IV violation. for a Station | ||
| NTF wlsrStaAssociatedToUnsecureAp | 1.3.6.1.4.1.14823.2.3.1.1.100.1042 | This trap indicates that a station with wlsrNodeMac associated with an Unsecure Access Point wlsrTargetApBSSID. This is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. | ||
| NTF wlsrAdhocNetworkBridgeDetected | 1.3.6.1.4.1.14823.2.3.1.1.100.1043 | This trap indicates that an AM has detected an Adhoc network that is bridging to a wired network | ||
| NTF wlsrInterferingApDetected | 1.3.6.1.4.1.14823.2.3.1.1.100.1044 | This trap indicates that an Interfering Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. |
RFC description
Aruba wireless access point and air monitor configuration, statistics, and traps.
Start monitoring Wireless LAN Access Point / Air Monitor, WIDS/WIPS-capable enterprise WLAN system (rogue-AP/signature-match intrusion-detection status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.