| OID symbolic | OID numeric | Type | Access | Description |
|---|
| vrrpIpv6MIB | 1.3.6.1.2.1.0 | | | This MIB describes objects used for managing Virtual Router
Redundancy Protocol (VRRP) for IPv6 routers.
Copyright (C) The Internet Society (2003). This version
of this MIB module is part of RFC XXXX: see the RFC
itself for full legal notices.
RFC Ed.: replace XXXX with assigned number & remove
this note. |
| vrrpIpv6Notifications | 1.3.6.1.2.1.0.0 | | | |
| NTF vrrpIpv6TrapNewMaster | 1.3.6.1.2.1.0.0.1 | | | The newMaster trap indicates that the sending agent
has transitioned to 'Master' state. The
vrrpIpv6TrapNewMasterReason indicates the reason due to
which the sending agent transitioned to 'master' state. |
| NTF vrrpIpv6TrapProtoError | 1.3.6.1.2.1.0.0.2 | | | The error trap indicates that the sending agent has
encountered the protocol error indicated by ErrorReason. |
| vrrpIpv6Operations | 1.3.6.1.2.1.0.1 | | | |
| I32 vrrpIpv6NodeVersion | 1.3.6.1.2.1.0.1.1 | Integer32 | read-only | This value identifies the particular version of the VRRP
over IPv6 supported by this node. Version 3 for this
document. |
| INT vrrpIpv6NotificationCntl | 1.3.6.1.2.1.0.1.2 | INTEGER | read-write | Indicates whether the VRRP-IPv6-enabled router will generate
SNMP traps for events defined in this MIB. 'Enabled'
results in SNMP traps; 'disabled', no traps are sent. |
| vrrpIpv6OperTable | 1.3.6.1.2.1.0.1.3 | | not-accessible | Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'vrrpIpv6OperEntry' items. |
| vrrpIpv6OperEntry | 1.3.6.1.2.1.0.1.3.1 | | not-accessible | An entry in the vrrpIpv6OperTable containing the
operational characteristics of a virtual router. On a VRRP
IPv6 router, a given virtual router is identified by a
Combination of the IF index and IPv6VRID.
Rows in the table cannot be modified unless the value
of `vrrpIpv6OperAdminState' is `disabled' and the
`vrrpIpv6OperState' has transitioned to `initialize'. |
| VRI vrrpIpv6OperVrId | 1.3.6.1.2.1.0.1.3.1.1 | VrId | read-only | This object contains the IPv6 Virtual Router Identifier
(IPv6VRID). |
| MAC vrrpIpv6OperVirtualMacAddr | 1.3.6.1.2.1.0.1.3.1.2 | MacAddress | read-only | The virtual MAC address of the virtual router. Although this
object can be derived from the 'vrrpIpv6OperVrId'object, it is
defined so that it is easily obtainable by a management
application and can be included in VRRP-related SNMP traps. |
| INT vrrpIpv6OperState | 1.3.6.1.2.1.0.1.3.1.3 | INTEGER | read-only | The current state of the virtual router. This object has
three defined values:
- `initialize', which indicates that all the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual router is
monitoring the availability of the master router.
- `master', which indicates that the virtual router
is forwarding packets for IPv6 addresses that are
associated with this router.
Setting the `vrrpIpv6OperAdminState' object(below) initiates
transitions in the value of this object. |
| INT vrrpIpv6OperAdminState | 1.3.6.1.2.1.0.1.3.1.4 | INTEGER | read-create | This object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to
`backup' or `master', depending on the value of
`vrrpIpv6OperPriority'. Setting the value to `down', will
transition the router from `master' or `backup' to
`initialize'. State transitions may not be immediate; they
sometimes depend on other factors, such as the interface
(IF) state.
The `vrrpIpv6OperAdminState' object must be set to `down'
prior to modifying the other read-create objects in the
conceptual row. The value of the `vrrpIpv6OperRowStatus'
object (below) must be `active', signifying that the
conceptual row is valid (i.e., the objects are correctly
set), in order for this object to be set to `up'. |
| I32 vrrpIpv6OperPriority | 1.3.6.1.2.1.0.1.3.1.5 | Integer32 | read-create | This object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has ceased
to participate in VRRP and a backup virtual router should
transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es). |
| IPt vrrpIpv6OperIpAddrType | 1.3.6.1.2.1.0.1.3.1.6 | InetAddressType | read-only | This specifies the the type of inetAddress in this row.
This should allways be ipv6(2) for this document. |
| IP vrrpIpv6OperMasterIpAddr | 1.3.6.1.2.1.0.1.3.1.7 | InetAddress | read-only | The master router's real (primary) IPv6 address. This is
the IPv6 address listed as the source in VRRP advertisement
last received by this virtual router. |
| I32 vrrpIpv6OperAdvInterval | 1.3.6.1.2.1.0.1.3.1.8 | Integer32 | read-create | The time interval, in seconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements. |
| T/F vrrpIpv6OperPreemptMode | 1.3.6.1.2.1.0.1.3.1.9 | TruthValue | read-create | Controls whether a higher priority virtual router will
preempt a lower priority master. |
| TIM vrrpIpv6OperVirtualRouterUpTime | 1.3.6.1.2.1.0.1.3.1.10 | TimeStamp | read-only | This is the value of the `sysUpTime' object when this
virtual router (i.e., the `vrrpIpv6OperState') transitioned
out of `initialized'. |
| INT vrrpIpv6OperProtocol | 1.3.6.1.2.1.0.1.3.1.11 | INTEGER | read-create | The particular protocol being controlled by this Virtual
Router.
New enumerations to this list can only be added via a new
RFC on the standards track. |
| ROW vrrpIpv6OperRowStatus | 1.3.6.1.2.1.0.1.3.1.12 | RowStatus | read-create | The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The rowstatus
of a currently active row in the vrrpIpv6OperTable is
constrained by the operational state of the corresponding
virtual router.
When `vrrpIpv6OperRowStatus' is set to active(1), no other
objects in the conceptual row, with the exception of
`vrrpIpv6OperAdminState', can be modified. Prior to setting
the `vrrpIpv6OperRowStatus' object from `active' to a
different value, the `vrrpIpv6OperAdminState' object must be
set to `down' and the `vrrpIpv6OperState' object be
transitioned to `initialize'.
To create a row in this table, a manager sets this object
to either createAndGo(4) or createAndWait(5). Until
instances of all corresponding columns are appropriately
configured, the value of the corresponding instance of the
`vrrpIpv6OperRowStatus' column will be read as notReady(3).
In particular, a newly created row cannot be made active(1)
until (minimally) the corresponding instance of
`vrrpIpv6OperVrId' has been set. |
| INT vrrpIpv6TrapNewMasterReason | 1.3.6.1.2.1.0.1.6 | INTEGER | accessible-for-notify | This indicates the reason for NewMaster trap.
Used by vrrpIpv6TrapNewMaster trap. |
| INT vrrpIpv6TrapProtoErrReason | 1.3.6.1.2.1.0.1.7 | INTEGER | accessible-for-notify | This indicates the reason for protocol error trap.
Used by vrrpIpv6TrapProtoError trap. |
| vrrpIpv6Statistics | 1.3.6.1.2.1.0.2 | | | |
| C32 vrrpIpv6RouterChecksumErrors | 1.3.6.1.2.1.0.2.1 | Counter32 | read-only | The total number of VRRP packets received with an invalid
VRRP checksum value. |
| C32 vrrpIpv6RouterVersionErrors | 1.3.6.1.2.1.0.2.2 | Counter32 | read-only | The total number of IPv6 VRRP packets received with an
unknown or unsupported version number. |
| C32 vrrpIpv6RouterVrIdErrors | 1.3.6.1.2.1.0.2.3 | Counter32 | read-only | The total number of IPv6 VRRP packets received with an
invalid IPv6VRID for this virtual router. |
| vrrpIpv6RouterStatsTable | 1.3.6.1.2.1.0.2.4 | | not-accessible | Table of virtual router statistics. |
| vrrpIpv6RouterStatsEntry | 1.3.6.1.2.1.0.2.4.1 | | not-accessible | An entry in the table, containing statistics information
about a given virtual router. |
| C32 vrrpIpv6StatsBecomeMaster | 1.3.6.1.2.1.0.2.4.1.1 | Counter32 | read-only | The total number of times that this virtual router's state
has transitioned to MASTER. |
| TIM vrrpIpv6StatsAsMasterUpTime | 1.3.6.1.2.1.0.2.4.1.2 | TimeStamp | read-only | The total number of seconds this router is UP in master
state. |
| C32 vrrpIpv6StatsAdvRcvd | 1.3.6.1.2.1.0.2.4.1.3 | Counter32 | read-only | The total number of IPv6 VRRP advertisements received by
this virtual router. |
| C32 vrrpIpv6StatsAdvIntervalErrors | 1.3.6.1.2.1.0.2.4.1.4 | Counter32 | read-only | The total number of IPv6 VRRP advertisement packets
received for which the advertisement interval is different
than the one configured for the local virtual router. |
| C32 vrrpIpv6StatsHopLimitErrors | 1.3.6.1.2.1.0.2.4.1.5 | Counter32 | read-only | The total number of IPv6 VRRP packets received by the
virtual router with IPv6 hop limit not equal to 255. |
| C32 vrrpIpv6StatsPriZeroPktsRcvd | 1.3.6.1.2.1.0.2.4.1.6 | Counter32 | read-only | The total number of IPv6 VRRP packets received by the
virtual router with a priority of '0'. |
| C32 vrrpIpv6StatsPriZeroPktsSent | 1.3.6.1.2.1.0.2.4.1.7 | Counter32 | read-only | The total number of IPv6 VRRP packets sent by the virtual
router with a priority of '0'. |
| C32 vrrpIpv6StatsInvalidTypePktsRcvd | 1.3.6.1.2.1.0.2.4.1.8 | Counter32 | read-only | The number of VRRP packets received by the virtual router
with an invalid value in the 'type' field. |
| C32 vrrpIpv6StatsAddressListErrors | 1.3.6.1.2.1.0.2.4.1.9 | Counter32 | read-only | The total number of packets received for which the address
list does not match the locally configured list for the
virtual router. |
| C32 vrrpIpv6StatsPacketLengthErrors | 1.3.6.1.2.1.0.2.4.1.10 | Counter32 | read-only | The total number of packets received with a packet length
less than the length of the VRRP header. |
| vrrpIpv6Conformance | 1.3.6.1.2.1.0.3 | | | |
| vrrpIpv6MIBCompliances | 1.3.6.1.2.1.0.3.1 | | | |
| vrrpIpv6MIBCompliance | 1.3.6.1.2.1.0.3.1.1 | | | The core compliance statement for all VRRP IPv6
implementations. |
| vrrpIpv6MIBGroups | 1.3.6.1.2.1.0.3.2 | | | |
| vrrpIpv6OperGroup | 1.3.6.1.2.1.0.3.2.1 | | | Conformance group for VRRP operations. |
| vrrpIpv6StatsGroup | 1.3.6.1.2.1.0.3.2.2 | | | Conformance group for VRRP statistics. |
| vrrpIpv6TrapGroup | 1.3.6.1.2.1.0.3.2.3 | | | Conformance group for objects contained in VRRP
notifications. |
| vrrpIpv6NotificationGroup | 1.3.6.1.2.1.0.3.2.4 | | | The VRRP MIB Notification Group. |
