VOLIUS-OT-MIB

All MIBs › VOLIUS-OT-MIB

Organization: Volius

Last Updated: 2011-05-31

Category: Volius Optical Transport

Description: Manages Volius optical transponder channel configuration, wavelength, and power levels.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VOLIUS-OT-MIB?

This is a Volius vendor MIB covering the company's family of SNMP-enabled fiber optical hardware, including fiber optical receivers, Erbium-doped fiber amplifiers (EDFAs), optical switches, and CATV optical transmitters. It exposes device identification (model, serial number, firmware and bootloader versions), system date/time and timezone, environmental readings (case temperature, fan speed), and a table of supply voltages compared against nominal values. It is squarely a hardware health MIB: case temperature and fan speed reveal thermal problems, the supply voltage table flags a failing power rail against its nominal value, and firmware/bootloader version confirms the software running on the unit. It appears to be a standalone enterprise MIB without an explicit dependency on other standard MIBs. It is deployed in CATV/fiber-optic head-end and outside-plant equipment such as optical amplifiers, transmitters, and switches in HFC/fiber access networks. Network engineers evaluating or troubleshooting this functionality can download the VOLIUS-OT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VOLIUS-OT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Volius optical transponders/receivers/EDFAs/optical switches
CATV optical transmitters

Monitoring Examples

An admin would poll vlsCaseTemperature and vlsFanSpeed to detect a transponder overheating due to fan failure, and check vlsSupplyVoltageTable (indexed by vlsSupplyVoltageIndex) comparing live voltage against vlsSupplyVoltageNominal to catch a failing power rail; vlsFirmwareVersion and vlsBootLoaderVersion confirm the unit is running the expected software.

What Can Be Monitored

case temperature
fan speed
supply voltage vs. nominal
firmware/bootloader version
system date/time and timezone

Imported Objects

From INET-ADDRESS-MIB

InetAddressIPv4

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 vlsAlarmIndex	1.3.6.1.4.1.34652.2.14.3.1.1	Integer32	read-only
STR vlsAlarmMessage	1.3.6.1.4.1.34652.2.14.3.1.3	DisplayString	read-only
vlsAlarms	1.3.6.1.4.1.34652.2.14
I32 vlsAlarmsActiveMask	1.3.6.1.4.1.34652.2.14.1	Integer32	read-only	This is a bit mask where all active alarms are combined. Alarms are latching, that is an alarm is still active even when the condition activating the alarm no longer exists.
vlsAlarmsEntry	1.3.6.1.4.1.34652.2.14.3.1		not-accessible
I32 vlsAlarmsResetMask	1.3.6.1.4.1.34652.2.14.2	Integer32	read-write	You can write reset mask to reset individual alarms. An alarm will be reset only if the activating condition no longer exists.
vlsAlarmsTable	1.3.6.1.4.1.34652.2.14.3		not-accessible
VLS vlsAlarmState	1.3.6.1.4.1.34652.2.14.3.1.2	VlsOnOff	read-write	When read, this OID indicates if the alarm is active. When vlsOff is written to this OID, the alarm is reset.
STR vlsBootLoaderVersion	1.3.6.1.4.1.34652.2.10.4	DisplayString	read-only
vlsCabinetMonitor	1.3.6.1.4.1.34652.7
VLS vlsCaseTemperature	1.3.6.1.4.1.34652.2.10.7	VlsDeciCelsius	read-only
vlsCatvTransmitter	1.3.6.1.4.1.34652.5
DAT vlsDateAndTime	1.3.6.1.4.1.34652.2.10.5	DateAndTime	read-only
ADR vlsDefaultGateway	1.3.6.1.4.1.34652.2.11.5.4	InetAddressIPv4	read-write
vlsEdfa	1.3.6.1.4.1.34652.3
VLS vlsEventCode	1.3.6.1.4.1.34652.2.13.4.1.2	VlsEvent	read-only
DAT vlsEventDateTime	1.3.6.1.4.1.34652.2.13.4.1.4	DateAndTime	read-only
I32 vlsEventIndex	1.3.6.1.4.1.34652.2.13.4.1.1	Integer32	read-only
vlsEventLog	1.3.6.1.4.1.34652.2.13
vlsEventLogEntry	1.3.6.1.4.1.34652.2.13.4.1		not-accessible
I32 vlsEventLogSize	1.3.6.1.4.1.34652.2.13.3	Integer32	read-only	Number of events stored in the log.
vlsEventLogTable	1.3.6.1.4.1.34652.2.13.4		not-accessible
STR vlsEventMessage	1.3.6.1.4.1.34652.2.13.4.1.5	DisplayString	read-only
TIK vlsEventTimeStamp	1.3.6.1.4.1.34652.2.13.4.1.3	TimeTicks	read-only
NTF vlsEventTrap	1.3.6.1.4.1.34652.2.13.8
VLS vlsFanSpeed	1.3.6.1.4.1.34652.2.10.8	VlsRPM	read-only
STR vlsFirmwareVersion	1.3.6.1.4.1.34652.2.10.3	DisplayString	read-only
vlsGlobalModule	1.3.6.1.4.1.34652.1			This MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical transmitters.
vlsHttp	1.3.6.1.4.1.34652.2.11.6
VLS vlsHttpEnabled	1.3.6.1.4.1.34652.2.11.6.2	VlsOnOff	read-write
VLS vlsHttpPasswordEnabled	1.3.6.1.4.1.34652.2.11.6.3	VlsOnOff	read-write
I32 vlsHttpPort	1.3.6.1.4.1.34652.2.11.6.1	Integer32	read-write
ADR vlsIpAddress	1.3.6.1.4.1.34652.2.11.5.2	InetAddressIPv4	read-write
VLS vlsLastEventCode	1.3.6.1.4.1.34652.2.13.1	VlsEvent	read-only
I32 vlsLastEventIndex	1.3.6.1.4.1.34652.2.13.2	Integer32	read-only
MAC vlsMacAddress	1.3.6.1.4.1.34652.2.11.5.1	MacAddress	read-write
STR vlsModelName	1.3.6.1.4.1.34652.2.10.1	DisplayString	read-only
ADR vlsNetMask	1.3.6.1.4.1.34652.2.11.5.3	InetAddressIPv4	read-write
vlsNetworkAddress	1.3.6.1.4.1.34652.2.11.5
vlsNetworkServices	1.3.6.1.4.1.34652.2.11
vlsOpticalReceiver	1.3.6.1.4.1.34652.6
vlsOpticalSwitch	1.3.6.1.4.1.34652.4
STR vlsSerialNumber	1.3.6.1.4.1.34652.2.10.2	DisplayString	read-only
vlsSnmp	1.3.6.1.4.1.34652.2.11.7
I32 vlsSnmpPort	1.3.6.1.4.1.34652.2.11.7.1	Integer32	read-write
vlsSntp	1.3.6.1.4.1.34652.2.11.8
VLS vlsSntpEnabled	1.3.6.1.4.1.34652.2.11.8.3	VlsOnOff	read-write
ADR vlsSntpServerAddr	1.3.6.1.4.1.34652.2.11.8.1	InetAddressIPv4	read-write
I32 vlsSntpServerPort	1.3.6.1.4.1.34652.2.11.8.2	Integer32	read-write
VLS vlsSupplyVoltageActual	1.3.6.1.4.1.34652.2.10.9.1.3	VlsMillivolt	read-only
vlsSupplyVoltageEntry	1.3.6.1.4.1.34652.2.10.9.1		not-accessible
I32 vlsSupplyVoltageIndex	1.3.6.1.4.1.34652.2.10.9.1.1	Integer32	read-only
VLS vlsSupplyVoltageNominal	1.3.6.1.4.1.34652.2.10.9.1.2	VlsMillivolt	read-only
vlsSupplyVoltageTable	1.3.6.1.4.1.34652.2.10.9		not-accessible
vlsSystem	1.3.6.1.4.1.34652.2
vlsSystemGeneral	1.3.6.1.4.1.34652.2.10
I32 vlsTimeZone	1.3.6.1.4.1.34652.2.10.6	Integer32	read-write	Difference between local and UTC in minutes.
ADR vlsTrapDestAddr	1.3.6.1.4.1.34652.2.11.7.2.1.2	InetAddressIPv4	read-write
VLS vlsTrapDestEnable	1.3.6.1.4.1.34652.2.11.7.2.1.4	VlsOnOff	read-write
vlsTrapDestEntry	1.3.6.1.4.1.34652.2.11.7.2.1		not-accessible
I32 vlsTrapDestIndex	1.3.6.1.4.1.34652.2.11.7.2.1.1	Integer32	read-only
I32 vlsTrapDestPort	1.3.6.1.4.1.34652.2.11.7.2.1.3	Integer32	read-write
vlsTrapDestTable	1.3.6.1.4.1.34652.2.11.7.2		not-accessible
VLS vlsTxAgc	1.3.6.1.4.1.34652.5.14	VlsOnOff	read-write	AGC mode on/off control.
VLS vlsTxAtt	1.3.6.1.4.1.34652.5.9	VlsDeciDb	read-only	Actual variable attenuator state. The range is 0..25 dB.
VLS vlsTxChannelPwrFactor	1.3.6.1.4.1.34652.5.7	VlsDeciDb	read-write	This factor is used to convert composite RF level to per-channel RF level. The factor is expressed in units of 0.1 dB and is always negative or zero. For example, if the channel plan is 100 channels all with the same RF level, the factor should be -200 (meaning -20.0 dB). Then, if composite RF level is 0 dBm (that is 108.75 dBuV), per-channel RF level would be 108.75 - 20 = 88.75 dBuV.
VLS vlsTxEmissionState	1.3.6.1.4.1.34652.5.1	VlsOnOff	read-only	Reports whether the laser is on or off.
VLS vlsTxInputComposite	1.3.6.1.4.1.34652.5.5	VlsDbm	read-only	Composite RF level at the transmitter input.
VLS vlsTxInputPerChannel	1.3.6.1.4.1.34652.5.6	VlsDbuv	read-only	Per-channel RF level at the transmitter input.
VLS vlsTxLaserCurrent	1.3.6.1.4.1.34652.5.10	VlsPercent	read-only	Laser current. 100% corresponds to the current set during factory calibration. The current is expected to rise slowly after years of operation (laser aging).
VLS vlsTxLaserPower	1.3.6.1.4.1.34652.5.12	VlsDeciDbm	read-only
VLS vlsTxLaserTecCurrent	1.3.6.1.4.1.34652.5.11	VlsPercent	read-only
VLS vlsTxLaserTemperature	1.3.6.1.4.1.34652.5.13	VlsDeciCelsius	read-only
VLS vlsTxOmi	1.3.6.1.4.1.34652.5.8	VlsPerMille	read-only	Composite OMI in units of 0.1%.
vlsTxOutputEntry	1.3.6.1.4.1.34652.5.2.1		not-accessible
I32 vlsTxOutputIndex	1.3.6.1.4.1.34652.5.2.1.1	Integer32	read-only	Optical output number (1 or 2).
VLS vlsTxOutputPower	1.3.6.1.4.1.34652.5.2.1.2	VlsDeciDbm	read-only	Optical output level.
vlsTxOutputTable	1.3.6.1.4.1.34652.5.2		not-accessible
VLS vlsTxPoutHighAlarm	1.3.6.1.4.1.34652.5.4	VlsDeciDbm	read-write	Output power high alarm threshold.
VLS vlsTxPoutLowAlarm	1.3.6.1.4.1.34652.5.3	VlsDeciDbm	read-write	Output power low alarm threshold.
VLS vlsTxSetAtt	1.3.6.1.4.1.34652.5.16	VlsDeciDb	read-write	Variable attenuator setpoint when AGC is off.
VLS vlsTxSetOmi	1.3.6.1.4.1.34652.5.15	VlsPerMille	read-write	OMI setpoint when AGC is on.
VLS vlsTxSetSbsThreshold	1.3.6.1.4.1.34652.5.17	VlsDbm	read-write	SBS suppression level.
vlsUpsMonitor	1.3.6.1.4.1.34652.8
volius	1.3.6.1.4.1.34652

RFC description

Manages Volius optical transmission equipment including amplifiers, receivers, switches, and CATV transmitters. Monitors optical power and performance metrics.

Start monitoring Volius optical transponders/receivers/EDFAs/optical switches, CATV optical transmitters (case-temperature/fan-speed/supply-voltage status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VOLIUS-OT-MIB

What Is VOLIUS-OT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description