All MIBs › VOLIUS-OT-MIB › vlsTxSetOmi
vlsTxSetOmi
Module: VOLIUS-OT-MIB
OID (symbolic): VOLIUS-OT-MIB::vlsTxSetOmi
OID (numeric): 1.3.6.1.4.1.34652.5.15
Node type: OBJECT-TYPE
Type: VlsPerMille
Access: read-write
Description: OMI setpoint when AGC is on.
What is vlsTxSetOmi?
This read-write value sets the target composite OMI, in units of 0.1%, that AGC mode will maintain when enabled. Adjust this to control how hard the transmitter's laser is modulated once AGC is turned on.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.34652.5.15 snmpwalk -v2c -c public <target> VOLIUS-OT-MIB::vlsTxSetOmi
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.34652.5.15.1 snmpget -v2c -c public <target> VOLIUS-OT-MIB::vlsTxSetOmi.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.34652.5.15.1 s <value>
Start monitoring Volius optical transponders/receivers/EDFAs/optical switches, CATV optical transmitters (case-temperature/fan-speed/supply-voltage status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VOLIUS-OT-MIB::vlsTxSetOmi OID value, configure state conditions and alerts, and monitor any Volius optical transponders/receivers/EDFAs/optical switches, CATV optical transmitters (case-temperature/fan-speed/supply-voltage status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.34652 | volius | VOLIUS-OA-MIB |
| 1.3.6.1.4.1.34652.5 | vlsCatvTransmitter | VOLIUS-OA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.34652.5.15 | vlsTxSetOmi | VOLIUS-OT-MIB |