VIDEOFRAME-SIGMON-VM0002-MIB DEFINITIONS ::= BEGIN -- Relationship to Other MIBs -- -- -- The objects defined in this MIB are located under the -- private.enterprises subtree as shown below: -- -- iso(1).org(3).dod(6).internet(1) -- | -- private(4) -- | -- enterprises(1) -- | -- videoframe(4596) -- | -- vfProducts(4) -- | -- vfSigmonFrame(2) -- | -- vfSigmonFrameModuleTypes(1) -- | -- vm0002AnalogVideo(2) -- -- -- References -- -- [1] RFC 1902. McCloghrie, K., and M. Rose, "Structure -- of Management Information for Version 2 of the Simple -- Network Management Protocol (SNMPv2)". -- January, 1996. -- -- [2] RFC 1903. McCloghrie, K., and M. Rose, "Textual -- Conventions for Version 2 of the Simple Network -- Management Protocol (SNMPv2)". -- January, 1996. -- -- [3] RFC 1904. McCloghrie, K., and M. Rose, "Conformance -- Statements for Version 2 of the Simple Network -- Management Protocol (SNMPv2)". -- January, 1996. -- -- [4] RFC 1907. McCloghrie, K., and M. Rose, "Management -- Information Base for Version 2 of the Simple Network -- Management Protocol (SNMPv2)". -- January, 1996. -- -- [5] Perkins, David and McGinnis, Evan; "Understanding SNMP -- MIBs". Prentice Hall, ISBN 0-13-437708-7, 1997. -- -- -- Object Synopsis -- -- -- All objects within this MIB are prefixed with the OBJECT -- IDENTIFIER "p", where "p" is: -- -- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1). -- videoframe(4596).vfProducts(4).vfSigmonFrame(2). -- vfSigmonFrameModuleTypes(1) -- -- or, 1.3.6.1.4.1.4596.4.2.1 -- -- -- Object Name Object Id -- -------------------------------- -------------- -- -- vm0002AnalogVideo p.2 -- vm0002Table p.2.1 -- vm0002TableEntry p.2.1.1 -- vm0002SlotNumber p.2.1.1.1.m m = slot # -- vm0002Active p.2.1.1.2.m -- vm0002FirmwareRev p.2.1.1.3.m -- vm0002Locate p.2.1.1.4.m -- vm0002SignalTable p.2.2 -- vm0002SignalEntry p.2.2.1 -- vm0002SignalSlotNumber p.2.2.1.1.m.n m = slot #, n = signal # -- vm0002SignalNumber p.2.2.1.2.m.n -- vm0002SignalName p.2.2.1.3.m.n -- vm0002SignalDescription p.2.2.1.4.m.n -- vm0002VsyncLossThreshold p.2.2.1.5.m.n -- vm0002VsyncLossPeriod p.2.2.1.6.m.n -- vm0002VsyncLossAlarmState p.2.2.1.7.m.n -- vm0002VsyncLossAlarmAck p.2.2.1.8.m.n -- vm0002VsyncLossTrapEnable p.2.2.1.9.m.n -- vm0002HsyncLossThreshold p.2.2.1.10.m.n -- vm0002HsyncLossPeriod p.2.2.1.11.m.n -- vm0002HsyncLossAlarmState p.2.2.1.12.m.n -- vm0002HsyncLossAlarmAck p.2.2.1.13.m.n -- vm0002HsyncLossTrapEnable p.2.2.1.14.m.n -- vm0002PedestalHighThreshold p.2.2.1.15.m.n -- vm0002PedestalHighPeriod p.2.2.1.16.m.n -- vm0002MeasuredPedestal p.2.2.1.17.m.n -- vm0002PedestalHighAlarmState p.2.2.1.18.m.n -- vm0002PedestalHighAlarmAck p.2.2.1.19.m.n -- vm0002PedestalHighTrapEnable p.2.2.1.20.m.n -- vm0002CurrentAplRaw p.2.2.1.21.m.n -- vm0002n100IRECalibrationSet p.2.2.1.22.m.n -- vm0002n100IRECalibrationValue p.2.2.1.23.m.n -- vm0002AplHighThreshold p.2.2.1.24.m.n -- vm0002AplHighDuration p.2.2.1.25.m.n -- vm0002AplHighAlarmState p.2.2.1.26.m.n -- vm0002AplHighAlarmAck p.2.2.1.27.m.n -- vm0002AplHighTrapEnable p.2.2.1.28.m.n -- vm0002AplLowThreshold p.2.2.1.29.m.n -- vm0002AplLowDuration p.2.2.1.30.m.n -- vm0002AplLowAlarmState p.2.2.1.31.m.n -- vm0002AplLowAlarmAck p.2.2.1.32.m.n -- vm0002AplLowTrapEnable p.2.2.1.33.m.n -- vm0002FrozenImageFilter p.2.2.1.34.m.n -- vm0002MaxFrozenDuration p.2.2.1.35.m.n -- vm0002FrozenAlarmState p.2.2.1.36.m.n -- vm0002FrozenAlarmAck p.2.2.1.37.m.n -- vm0002FrozenTrapEnable p.2.2.1.38.m.n -- vm0002BurstPresent p.2.2.1.39.m.n -- vm0002AnalogVideoEvents p.2.3 -- vm0002AnalogVideoEventsV2 p.2.3.0 -- analogVideoVSyncLossAlarm p.2.3.0.1 -- analogVideoHSyncLossAlarm p.2.3.0.2 -- analogVideoPedestalHighAlarm p.2.3.0.3 -- analogVideoAPLHighAlarm p.2.3.0.4 -- analogVideoAPLLowAlarm p.2.3.0.5 -- analogVideoFrozenImageAlarm p.2.3.0.6 -- IMPORTS OBJECT-TYPE FROM RFC1155-SMI MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE, IpAddress FROM SNMPv2-SMI DisplayString, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF vfMIBModules FROM VIDEOFRAME-REGISTRATIONS-MIB vfBoxId FROM VIDEOFRAME-GENERIC-MIB vfSigmonFrameModuleTypes, vfProductsVF200Reg, vfFrameSlotNumber FROM VIDEOFRAME-SIGMON-MIB; videoframeSigmonVm0002MIB MODULE-IDENTITY LAST-UPDATED "0108300000Z" ORGANIZATION "Videoframe Systems" CONTACT-INFO "Videoframe Systems P.O. Box 1991, Grass Valley, CA 95945, USA. +1 (530) 477-2000 http://www.videoframesystems.com" DESCRIPTION "This MIB describes the device specific objects of the VM0002 Analog Video Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc." REVISION "0108300000Z" DESCRIPTION "First release." ::= { vfMIBModules 5 } -- -- VM0002 product registration. vfProductsVF200Reg is from -- vf-sigmon -- vfProductsVM0002Reg OBJECT-IDENTITY STATUS current DESCRIPTION "Videoframe VM0002 Analog Video Monitoring Module." ::= { vfProductsVF200Reg 2 } -- -- The VM0002 MIB top-level groups -- -- root of this MIB module vm0002AnalogVideo OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 2 } -- -- Other signal monitoring modules, whose management information is defined in -- other MIB modules. -- -- vm0001AnalogAudio OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 1 } -- vm0003AESEBUAudio OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 3 } -- vm0004SDIVideo OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 4 } -- vm0005SerialIO OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 5 } -- vm0006GPIInterface OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 6 } -- vm0007TransferSwitch OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 7 } -- vm0008CPU OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 8 } -- vm0009DTMFTransceiver OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 9 } -- vm0010GPOInterface OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 10 } -- vm0011GPIOInterface OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 11 } -- vm0002Table OBJECT-TYPE SYNTAX SEQUENCE OF Vm0002Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains information about one VM0002 Analog Video module in the managed VF200 frame." ::= { vm0002AnalogVideo 1} vm0002Entry OBJECT-TYPE SYNTAX Vm0002Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Analog Video module entry." INDEX { vfFrameSlotNumber } ::= { vm0002Table 1 } Vm0002Entry ::= SEQUENCE { vm0002SlotNumber INTEGER, vm0002Active INTEGER, vm0002FirmwareRev DisplayString, vm0002Locate INTEGER } vm0002SlotNumber OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot that this entry represents." ::= { vm0002Entry 1 } vm0002Active OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this entry is active (this module is in this slot)." ::= { vm0002Entry 2 } vm0002FirmwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision level of the firmware on this module." ::= { vm0002Entry 3 } vm0002Locate OBJECT-TYPE SYNTAX INTEGER { flash(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing." ::= { vm0002Entry 4 } vm0002SignalTable OBJECT-TYPE SYNTAX SEQUENCE OF Vm0002SignalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains information about one channel of one VM0002 Analog Video module in the managed VF200 frame." ::= { vm0002AnalogVideo 2} vm0002SignalEntry OBJECT-TYPE SYNTAX Vm0002SignalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Analog Video module channel entry." INDEX { vfFrameSlotNumber, vm0002SignalNumber } ::= { vm0002SignalTable 1 } Vm0002SignalEntry ::= SEQUENCE { vm0002SignalSlotNumber INTEGER, vm0002SignalNumber INTEGER, vm0002SignalName DisplayString, vm0002SignalDescription DisplayString, vm0002VSyncLossThreshold INTEGER, vm0002VSyncLossPeriod INTEGER, vm0002VSyncLossAlarmState INTEGER, vm0002VSyncLossAlarmAck INTEGER, vm0002VSyncLossTrapEnable INTEGER, vm0002HSyncLossThreshold INTEGER, vm0002HSyncLossPeriod INTEGER, vm0002HSyncLossAlarmState INTEGER, vm0002HSyncLossAlarmAck INTEGER, vm0002HSyncLossTrapEnable INTEGER, vm0002PedestalHighThreshold INTEGER, vm0002PedestalHighPeriod INTEGER, vm0002MeasuredPedestal INTEGER, vm0002PedestalHighAlarmState INTEGER, vm0002PedestalHighAlarmAck INTEGER, vm0002PedestalHighTrapEnable INTEGER, vm0002CurrentAplRaw INTEGER, vm0002n100IRECalibrationSet INTEGER, vm0002n100IRECalibrationValue INTEGER, vm0002AplHighThreshold INTEGER, vm0002AplHighDuration INTEGER, vm0002AplHighAlarmState INTEGER, vm0002AplHighAlarmAck INTEGER, vm0002AplHighTrapEnable INTEGER, vm0002AplLowThreshold INTEGER, vm0002AplLowDuration INTEGER, vm0002AplLowAlarmState INTEGER, vm0002AplLowAlarmAck INTEGER, vm0002AplLowTrapEnable INTEGER, vm0002FrozenImageFilter INTEGER, vm0002MaxFrozenDuration INTEGER, vm0002FrozenAlarmState INTEGER, vm0002FrozenAlarmAck INTEGER, vm0002FrozenTrapEnable INTEGER, vm0002BurstPresent INTEGER } vm0002SignalSlotNumber OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame slot number that this entry represents." ::= { vm0002SignalEntry 1 } vm0002SignalNumber OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The channel within the module to which this signal is connected." ::= { vm0002SignalEntry 2 } vm0002SignalName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the signal connected to this channel." ::= { vm0002SignalEntry 3 } vm0002SignalDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..120)) MAX-ACCESS read-write STATUS current DESCRIPTION "Descriptive identification of the signal connected to this channel." ::= { vm0002SignalEntry 4 } vm0002VSyncLossThreshold OBJECT-TYPE SYNTAX INTEGER(0..65075262) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of frames with VSync errors to tolerate within the VSyncLossPeriod before alarming for this channel." ::= { vm0002SignalEntry 5 } vm0002VSyncLossPeriod OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The period, in milliseconds, over which vertical sync errors are accumulated for this channel." ::= { vm0002SignalEntry 6 } vm0002VSyncLossAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the vertical sync loss alarm for this channel." ::= { vm0002SignalEntry 7 } vm0002VSyncLossAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered vertical sync loss alarm for this channel." ::= { vm0002SignalEntry 8 } vm0002VSyncLossTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the vertical sync loss alarm trap for this channel." ::= { vm0002SignalEntry 9 } vm0002HSyncLossThreshold OBJECT-TYPE SYNTAX INTEGER(0..65075262) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of frames with horizontal sync errors to tolerate within the HSyncLossPeriod before alarming for this channel." ::= { vm0002SignalEntry 10 } vm0002HSyncLossPeriod OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The period, in milliseconds, over which horizontal sync loss errors are accumulated for this channel." ::= { vm0002SignalEntry 11 } vm0002HSyncLossAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the horizontal sync loss alarm for this channel." ::= { vm0002SignalEntry 12 } vm0002HSyncLossAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered horizontal sync loss alarm for this channel." ::= { vm0002SignalEntry 13 } vm0002HSyncLossTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the horizontal sync loss alarm trap for this channel." ::= { vm0002SignalEntry 14 } vm0002PedestalHighThreshold OBJECT-TYPE SYNTAX INTEGER(0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Pedestal level above which to alarm for this channel, in units of 1/10th IRE." ::= { vm0002SignalEntry 15 } vm0002PedestalHighPeriod OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The period, in milliseconds, that the pedestal must remain above the threshold to alarm for this channel." ::= { vm0002SignalEntry 16 } vm0002MeasuredPedestal OBJECT-TYPE SYNTAX INTEGER(0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "The current measured pedestal level on this channel, in units of 1/10th IRE." ::= { vm0002SignalEntry 17 } vm0002PedestalHighAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the pedestal high alarm for this channel." ::= { vm0002SignalEntry 18 } vm0002PedestalHighAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered pedestal high alarm for this channel." ::= { vm0002SignalEntry 19 } vm0002PedestalHighTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the pedestal high alarm trap for this channel." ::= { vm0002SignalEntry 20 } vm0002CurrentAplRaw OBJECT-TYPE SYNTAX INTEGER(0..1023) MAX-ACCESS read-only STATUS current DESCRIPTION "The current average luminance value on this channel, as a raw 10-bit sample value." ::= { vm0002SignalEntry 21 } vm0002n100IRECalibrationSet OBJECT-TYPE SYNTAX INTEGER { ready(1), go(2), notReady(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 'go' (2) to set the value of the 100 IRE channel calibration to the current average luminance value on this channel." ::= { vm0002SignalEntry 22 } vm0002n100IRECalibrationValue OBJECT-TYPE SYNTAX INTEGER(0..1023) MAX-ACCESS read-only STATUS current DESCRIPTION "The current raw luminance value used as the 100 IRE reference on this channel." ::= { vm0002SignalEntry 23 } vm0002AplHighThreshold OBJECT-TYPE SYNTAX INTEGER(0..150) MAX-ACCESS read-write STATUS current DESCRIPTION "The high APL alarm threshold for this channel, in IRE." ::= { vm0002SignalEntry 24 } vm0002AplHighDuration OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The high APL duration, in milliseconds, at which to alarm, for this channel." ::= { vm0002SignalEntry 25 } vm0002AplHighAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the high APL alarm for this channel." ::= { vm0002SignalEntry 26 } vm0002AplHighAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered high APL alarm for this channel." ::= { vm0002SignalEntry 27 } vm0002AplHighTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the high APL alarm trap for this channel." ::= { vm0002SignalEntry 28 } vm0002AplLowThreshold OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The low APL alarm threshold for this channel, in IRE." ::= { vm0002SignalEntry 29 } vm0002AplLowDuration OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The low APL duration, in milliseconds, at which to alarm, for this channel." ::= { vm0002SignalEntry 30 } vm0002AplLowAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the low APL alarm for this channel." ::= { vm0002SignalEntry 31 } vm0002AplLowAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered low APL alarm for this channel." ::= { vm0002SignalEntry 32 } vm0002AplLowTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the low APL alarm trap for this channel." ::= { vm0002SignalEntry 33 } vm0002FrozenImageFilter OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The algorithm to use for the frozen image alarm for this channel." ::= { vm0002SignalEntry 34 } vm0002MaxFrozenDuration OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The frozen image duration, in milliseconds, at which to alarm, for this channel." ::= { vm0002SignalEntry 35 } vm0002FrozenAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the frozen image alarm for this channel." ::= { vm0002SignalEntry 36 } vm0002FrozenAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered frozen image alarm for this channel." ::= { vm0002SignalEntry 37 } vm0002FrozenTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the frozen image alarm trap for this channel." ::= { vm0002SignalEntry 38 } vm0002BurstPresent OBJECT-TYPE SYNTAX INTEGER { present(1), notPresent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether color burst is present on this channel." ::= { vm0002SignalEntry 39 } -- -- VM0002 Events -- vm0002AnalogVideoEvents OBJECT IDENTIFIER ::= { vm0002AnalogVideo 3 } vm0002AnalogVideoEventsV2 OBJECT IDENTIFIER ::= { vm0002AnalogVideoEvents 0 } analogVideoVSyncLossAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0002SlotNumber, vm0002SignalNumber, vm0002SignalName, vm0002SignalDescription } STATUS current DESCRIPTION "An Analog Video vertical sync loss alarm was triggered." ::= { vm0002AnalogVideoEventsV2 1 } analogVideoHSyncLossAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0002SlotNumber, vm0002SignalNumber, vm0002SignalName, vm0002SignalDescription } STATUS current DESCRIPTION "An Analog Video horizontal sync loss alarm was triggered." ::= { vm0002AnalogVideoEventsV2 2 } analogVideoPedestalHighAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0002SlotNumber, vm0002SignalNumber, vm0002SignalName, vm0002SignalDescription } STATUS current DESCRIPTION "An Analog Video pedestal high alarm was triggered." ::= { vm0002AnalogVideoEventsV2 3 } analogVideoAPLHighAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0002SlotNumber, vm0002SignalNumber, vm0002SignalName, vm0002SignalDescription } STATUS current DESCRIPTION "An Analog Video APL high alarm was triggered." ::= { vm0002AnalogVideoEventsV2 4 } analogVideoAPLLowAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0002SlotNumber, vm0002SignalNumber, vm0002SignalName, vm0002SignalDescription } STATUS current DESCRIPTION "An Analog Video APL low alarm was triggered." ::= { vm0002AnalogVideoEventsV2 5 } analogVideoFrozenImageAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0002SlotNumber, vm0002SignalNumber, vm0002SignalName, vm0002SignalDescription } STATUS current DESCRIPTION "An Analog Video frozen image alarm was triggered." ::= { vm0002AnalogVideoEventsV2 6 } END