VIDEOFRAME-SIGMON-VM0001-MIB DEFINITIONS ::= BEGIN -- Relationship to Other MIBs -- -- -- The objects defined in this MIB are located under the -- private.enterprises subtree as shown below: -- -- iso(1).org(3).dod(6).internet(1) -- | -- private(4) -- | -- enterprises(1) -- | -- videoframe(4596) -- | -- vfProducts(4) -- | -- vfSigmonFrame(2) -- | -- vfSigmonFrameModules(1) -- | -- vm0001AnalogAudio(1) -- -- -- References -- -- [1] RFC 1902. McCloghrie, K., and M. Rose, "Structure -- of Management Information for Version 2 of the Simple -- Network Management Protocol (SNMPv2)". -- January, 1996. -- -- [2] RFC 1903. McCloghrie, K., and M. Rose, "Textual -- Conventions for Version 2 of the Simple Network -- Management Protocol (SNMPv2)". -- January, 1996. -- -- [3] RFC 1904. McCloghrie, K., and M. Rose, "Conformance -- Statements for Version 2 of the Simple Network -- Management Protocol (SNMPv2)". -- January, 1996. -- -- [4] RFC 1907. McCloghrie, K., and M. Rose, "Management -- Information Base for Version 2 of the Simple Network -- Management Protocol (SNMPv2)". -- January, 1996. -- -- [5] Perkins, David and McGinnis, Evan; "Understanding SNMP -- MIBs". Prentice Hall, ISBN 0-13-437708-7, 1997. -- -- -- Object Synopsis -- -- -- All objects within this MIB are prefixed with the OBJECT -- IDENTIFIER "p", where "p" is: -- -- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1). -- videoframe(4596).vfProducts(4).vfSigmonFrame(2). -- vfSigmonFrameModuleTypes(1) -- -- or, 1.3.6.1.4.1.4596.4.2.1 -- -- -- Object Name Object Id -- -------------------------------- -------------- -- -- vm0001AnalogAudio p.1 -- vm0001Table p.1.1 -- vm0001TableEntry p.1.1.1 -- vm0001SlotNumber p.1.1.1.1.m m = slot # -- vm0001Active p.1.1.1.2.m -- vm0001FirmwareRev p.1.1.1.3.m -- vm0001Locate p.1.1.1.4.m -- vm0001SignalTable p.1.2 -- vm0001SignalEntry p.1.2.1 -- vm0001SignalSlotNumber p.1.2.1.1.m.n m = slot #, n = signal # -- vm0001SignalNumber p.1.2.1.2.m.n -- vm0001SignalName p.1.2.1.3.m.n -- vm0001SignalDescription p.1.2.1.4.m.n -- vm0001CurrentAplRaw p.1.2.1.5.m.n -- vm0001ZerodBCalibrationSet p.1.2.1.6.m.n -- vm0001ZerodBCalibrationValue p.1.2.1.7.m.n -- vm0001AplHighThreshold p.1.2.1.8.m.n -- vm0001AplHighDuration p.1.2.1.9.m.n -- vm0001AplHighAlarmState p.1.2.1.10.m.n -- vm0001AplHighAlarmAck p.1.2.1.11.m.n -- vm0001AplHighTrapEnable p.1.2.1.12.m.n -- vm0001AplLowThreshold p.1.2.1.13.m.n -- vm0001AplLowDuration p.1.2.1.14.m.n -- vm0001AplLowAlarmState p.1.2.1.15.m.n -- vm0001AplLowAlarmAck p.1.2.1.16.m.n -- vm0001AplLowTrapEnable p.1.2.1.17.m.n -- vm0001PeakThreshold p.1.2.1.18.m.n -- vm0001PeakPeriod p.1.2.1.19.m.n -- vm0001PeakAlarmState p.1.2.1.20.m.n -- vm0001PeakAlarmAck p.1.2.1.21.m.n -- vm0001PeakTrapEnable p.1.2.1.22.m.n -- vm0001StereoPairTable p.1.3 -- vm0001StereoPairEntry p.1.3.1 -- vm0001StereoPairSlotNumber p.1.3.1.1.m.n m = slot #, n = stereo pair # -- vm0001StereoPairNumber p.1.3.1.2.m.n -- vm0001StereoPairName p.1.3.1.3.m.n -- vm0001StereoPairDescription p.1.3.1.4.m.n -- vm0001MonoFilter p.1.3.1.5.m.n -- vm0001MonoDuration p.1.3.1.6.m.n -- vm0001MonoAlarmState p.1.3.1.7.m.n -- vm0001MonoAlarmAck p.1.3.1.8.m.n -- vm0001MonoTrapEnable p.1.3.1.9.m.n -- vm0001StereoOutOfPhaseFilter p.1.3.1.10.m.n -- vm0001StereoOutOfPhaseDuration p.1.3.1.11.m.n -- vm0001StereoOutOfPhaseAlarmState p.1.3.1.12.m.n -- vm0001StereoOutOfPhaseAlarmAck p.1.3.1.13.m.n -- vm0001AnalogAudioEvents p.1.4 -- vm0001AnalogAudioEventsV2 p.1.4.0 -- analogAudioAPLHighAlarm p.1.4.0.1 -- analogAudioAPLLowAlarm p.1.4.0.2 -- analogAudioPeakAlarm p.1.4.0.3 -- analogAudioMonoAlarm p.1.4.0.4 -- analogAudioStereoOutOfPhaseAlarm p.1.4.0.5 -- IMPORTS OBJECT-TYPE FROM RFC1155-SMI MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE, Integer32, IpAddress FROM SNMPv2-SMI DisplayString, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF vfMIBModules FROM VIDEOFRAME-REGISTRATIONS-MIB vfBoxId FROM VIDEOFRAME-GENERIC-MIB vfSigmonFrameModuleTypes, vfProductsVF200Reg, vfFrameSlotNumber FROM VIDEOFRAME-SIGMON-MIB; videoframeSigmonVm0001MIB MODULE-IDENTITY LAST-UPDATED "0108300000Z" ORGANIZATION "Videoframe Systems" CONTACT-INFO "Videoframe Systems P.O. Box 1991, Grass Valley, CA 95945, USA. +1 (530) 477-2000 http://www.videoframesystems.com" DESCRIPTION "This MIB describes the device specific objects of the VM0001 Analog Audio Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc." REVISION "0108300000Z" DESCRIPTION "First release." ::= { vfMIBModules 4 } -- -- VM0001 product registration. vfProductsVF200Reg is from -- vf-sigmon -- vfProductsVM0001Reg OBJECT-IDENTITY STATUS current DESCRIPTION "Videoframe VM0001 Analog Audio Monitoring Module." ::= { vfProductsVF200Reg 1 } -- -- The VM0001 MIB top-level groups -- -- root of this MIB module vm0001AnalogAudio OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 1 } -- -- Other signal monitoring modules, whose management information is defined in -- other MIB modules. -- -- vm0002AnalogVideo OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 2 } -- vm0003AESEBUAudio OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 3 } -- vm0004SDIVideo OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 4 } -- vm0005SerialIO OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 5 } -- vm0006GPIInterface OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 6 } -- vm0007TransferSwitch OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 7 } -- vm0008CPU OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 8 } -- vm0009DTMFTransceiver OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 9 } -- vm0010GPOInterface OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 10 } -- vm0011GPIOInterface OBJECT IDENTIFIER ::= { vfSigmonFrameModuleTypes 11 } -- vm0001Table OBJECT-TYPE SYNTAX SEQUENCE OF Vm0001Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains information about one VM0001 Analog Audio module in the managed VF200 frame." ::= { vm0001AnalogAudio 1} vm0001Entry OBJECT-TYPE SYNTAX Vm0001Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Analog Audio module entry." INDEX { vfFrameSlotNumber } ::= { vm0001Table 1 } Vm0001Entry ::= SEQUENCE { vm0001SlotNumber INTEGER, vm0001Active INTEGER, vm0001FirmwareRev DisplayString, vm0001Locate INTEGER } vm0001SlotNumber OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot that this entry represents." ::= { vm0001Entry 1 } vm0001Active OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this entry is active (this module is in this slot)." ::= { vm0001Entry 2 } vm0001FirmwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision level of the firmware on this module." ::= { vm0001Entry 3 } vm0001Locate OBJECT-TYPE SYNTAX INTEGER { flash(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing." ::= { vm0001Entry 4 } vm0001SignalTable OBJECT-TYPE SYNTAX SEQUENCE OF Vm0001SignalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains information about one channel of one VM0001 Analog Audio module in the managed VF200 frame." ::= { vm0001AnalogAudio 2} vm0001SignalEntry OBJECT-TYPE SYNTAX Vm0001SignalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Analog Audio module channel entry." INDEX { vfFrameSlotNumber, vm0001SignalNumber } ::= { vm0001SignalTable 1 } Vm0001SignalEntry ::= SEQUENCE { vm0001SignalSlotNumber INTEGER, vm0001SignalNumber INTEGER, vm0001SignalName DisplayString, vm0001SignalDescription DisplayString, vm0001CurrentAplRaw INTEGER, vm0001ZerodBCalibrationSet INTEGER, vm0001ZerodBCalibrationValue INTEGER, vm0001AplHighThreshold INTEGER, vm0001AplHighDuration INTEGER, vm0001AplHighAlarmState INTEGER, vm0001AplHighAlarmAck INTEGER, vm0001AplHighTrapEnable INTEGER, vm0001AplLowThreshold INTEGER, vm0001AplLowDuration INTEGER, vm0001AplLowAlarmState INTEGER, vm0001AplLowAlarmAck INTEGER, vm0001AplLowTrapEnable INTEGER, vm0001PeakThreshold INTEGER, vm0001PeakPeriod INTEGER, vm0001PeakAlarmState INTEGER, vm0001PeakAlarmAck INTEGER, vm0001PeakTrapEnable INTEGER } vm0001SignalSlotNumber OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame slot number that this entry represents." ::= { vm0001SignalEntry 1 } vm0001SignalNumber OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The channel within the module to which this signal is connected." ::= { vm0001SignalEntry 2 } vm0001SignalName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the signal connected to this channel." ::= { vm0001SignalEntry 3 } vm0001SignalDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..120)) MAX-ACCESS read-write STATUS current DESCRIPTION "Descriptive identification of the signal connected to this channel." ::= { vm0001SignalEntry 4 } vm0001CurrentAplRaw OBJECT-TYPE SYNTAX INTEGER(0..131071) MAX-ACCESS read-only STATUS current DESCRIPTION "The current average amplitude value on this channel, in raw sample units." ::= { vm0001SignalEntry 5 } vm0001ZerodBCalibrationSet OBJECT-TYPE SYNTAX INTEGER { ready(1), go(2), notReady(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 'go' (2) to set the value of the 0 dB channel calibration to the current average amplitude value on this channel." ::= { vm0001SignalEntry 6 } vm0001ZerodBCalibrationValue OBJECT-TYPE SYNTAX INTEGER(0..131071) MAX-ACCESS read-only STATUS current DESCRIPTION "The current raw sample amplitude value used as the 0 dB reference on this channel." ::= { vm0001SignalEntry 7 } vm0001AplHighThreshold OBJECT-TYPE SYNTAX INTEGER(-80..30) MAX-ACCESS read-write STATUS current DESCRIPTION "The high APL alarm threshold for this channel, in dB." ::= { vm0001SignalEntry 8 } vm0001AplHighDuration OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The high APL duration, in milliseconds, at which to alarm, for this channel." ::= { vm0001SignalEntry 9 } vm0001AplHighAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the high APL alarm for this channel." ::= { vm0001SignalEntry 10 } vm0001AplHighAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered high APL alarm for this channel." ::= { vm0001SignalEntry 11 } vm0001AplHighTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the high APL alarm trap for this channel." ::= { vm0001SignalEntry 12 } vm0001AplLowThreshold OBJECT-TYPE SYNTAX INTEGER(-80..30) MAX-ACCESS read-write STATUS current DESCRIPTION "The low APL alarm threshold for this channel, in dB." ::= { vm0001SignalEntry 13 } vm0001AplLowDuration OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The low APL duration, in milliseconds, at which to alarm, for this channel." ::= { vm0001SignalEntry 14 } vm0001AplLowAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the low APL alarm for this channel." ::= { vm0001SignalEntry 15 } vm0001AplLowAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered low APL alarm for this channel." ::= { vm0001SignalEntry 16 } vm0001AplLowTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the low APL alarm trap for this channel." ::= { vm0001SignalEntry 17 } vm0001PeakThreshold OBJECT-TYPE SYNTAX INTEGER(-80..30) MAX-ACCESS read-write STATUS current DESCRIPTION "The peak level above which to alarm." ::= { vm0001SignalEntry 18 } vm0001PeakPeriod OBJECT-TYPE SYNTAX INTEGER(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The period, in milliseconds, over which the peak value is accumulated for this channel." ::= { vm0001SignalEntry 19 } vm0001PeakAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the peak-threshold-exceeded alarm for this channel." ::= { vm0001SignalEntry 20 } vm0001PeakAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered peak alarm for this channel." ::= { vm0001SignalEntry 21 } vm0001PeakTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the peak alarm trap for this channel." ::= { vm0001SignalEntry 22 } vm0001StereoPairTable OBJECT-TYPE SYNTAX SEQUENCE OF Vm0001StereoPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains information about one stereo pair on one VM0001 Analog Audio module in the managed VF200 frame." ::= { vm0001AnalogAudio 3 } vm0001StereoPairEntry OBJECT-TYPE SYNTAX Vm0001StereoPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Analog Audio module channel entry." INDEX { vm0001StereoPairSlotNumber, vm0001StereoPairNumber } ::= { vm0001StereoPairTable 1 } Vm0001StereoPairEntry ::= SEQUENCE { vm0001StereoPairSlotNumber INTEGER, vm0001StereoPairNumber DisplayString, vm0001StereoPairName DisplayString, vm0001StereoPairDescription DisplayString, vm0001MonoFilter INTEGER, vm0001MonoDuration Integer32, vm0001MonoAlarmState INTEGER, vm0001MonoAlarmAck INTEGER, vm0001MonoTrapEnable INTEGER, vm0001StereoOutOfPhaseFilter INTEGER, vm0001StereoOutOfPhaseDuration Integer32, vm0001StereoOutOfPhaseAlarmState INTEGER, vm0001StereoOutOfPhaseAlarmAck INTEGER } vm0001StereoPairSlotNumber OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot that this entry represents." ::= { vm0001StereoPairEntry 1 } vm0001StereoPairNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The channel within the module to which this signal is connected." ::= { vm0001StereoPairEntry 2 } vm0001StereoPairName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the signal connected to this channel." ::= { vm0001StereoPairEntry 3 } vm0001StereoPairDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..120)) MAX-ACCESS read-write STATUS current DESCRIPTION "Descriptive identifier of the signal connected to this channel." ::= { vm0001StereoPairEntry 4 } vm0001MonoFilter OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The filter type currently selected for the mono alarm for this stereo pair." ::= { vm0001StereoPairEntry 5 } vm0001MonoDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The mono duration, in milliseconds, at which to alarm, for this stereo pair." ::= { vm0001StereoPairEntry 6 } vm0001MonoAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current state of the mono alarm for this stereo pair." ::= { vm0001StereoPairEntry 7 } vm0001MonoAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered mono alarm for this stereo pair." ::= { vm0001StereoPairEntry 8 } vm0001MonoTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled (1) to enable the high APL alarm trap for this stereo pair." ::= { vm0001StereoPairEntry 9 } vm0001StereoOutOfPhaseFilter OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The filter type currently selected for the stereo out of phase alarm for this stereo pair." ::= { vm0001StereoPairEntry 10 } vm0001StereoOutOfPhaseDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The stereo out of phase duration, in milliseconds, at which to alarm, for this stereo pair." ::= { vm0001StereoPairEntry 11 } vm0001StereoOutOfPhaseAlarmState OBJECT-TYPE SYNTAX INTEGER { ready(1), triggered(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the stereo out of phase alarm for this stereo pair." ::= { vm0001StereoPairEntry 12 } vm0001StereoOutOfPhaseAlarmAck OBJECT-TYPE SYNTAX INTEGER { idle(1), unacknowledged(2), acknowledge(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to acknowledge (3) to acknowledge a triggered stereo out of phase alarm for this stereo pair." ::= { vm0001StereoPairEntry 13 } -- -- VM0001 Events -- vm0001AnalogAudioEvents OBJECT IDENTIFIER ::= { vm0001AnalogAudio 4 } vm0001AnalogAudioEventsV2 OBJECT IDENTIFIER ::= { vm0001AnalogAudioEvents 0 } analogAudioAPLHighAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0001SlotNumber, vm0001SignalNumber, vm0001SignalName, vm0001SignalDescription } STATUS current DESCRIPTION "An Analog Audio APL high alarm was triggered." ::= { vm0001AnalogAudioEventsV2 1 } analogAudioAPLLowAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0001SlotNumber, vm0001SignalNumber, vm0001SignalName, vm0001SignalDescription } STATUS current DESCRIPTION "An Analog Audio APL low alarm was triggered." ::= { vm0001AnalogAudioEventsV2 2 } analogAudioPeakAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0001SlotNumber, vm0001SignalNumber, vm0001SignalName, vm0001SignalDescription } STATUS current DESCRIPTION "An Analog Audio peak threshold exceeded alarm was triggered." ::= { vm0001AnalogAudioEventsV2 3 } analogAudioMonoAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0001StereoPairSlotNumber, vm0001StereoPairNumber, vm0001StereoPairName, vm0001StereoPairDescription } STATUS current DESCRIPTION "An Analog Audio mono alarm was triggered." ::= { vm0001AnalogAudioEventsV2 4 } analogAudioStereoOutOfPhaseAlarm NOTIFICATION-TYPE OBJECTS { vfBoxId, vm0001StereoPairSlotNumber, vm0001StereoPairNumber, vm0001StereoPairName, vm0001StereoPairDescription } STATUS current DESCRIPTION "An Analog Audio stereo out of phase alarm was triggered." ::= { vm0001AnalogAudioEventsV2 5 } END