VERTICAL-STATION-MIB

All MIBs › VERTICAL-STATION-MIB

Category: VoIP and Telephony

Description: Manages Vertical Networks IP telephony station registration, extension assignment, and call state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VERTICAL-STATION-MIB?

VERTICAL-STATION-MIB is a proprietary MIB from Vertical Networks for its IP telephony platforms, covering management of telephone "stations", the registration, extension-number assignment, and call state of endpoints on the system. Its data falls into the configuration and status categories: which stations are registered, what extension each is mapped to, and the live call/session state of each line. This makes it useful for monitoring the operational/software status of an IP-PBX deployment, detecting a station that has failed to register, an extension conflict, or a station stuck in an abnormal call state. No module description text was available, and its object tree root is simply named "vertical," so its exact table structure must be inferred from Vertical's broader MIB family; it likely depends on Vertical's other IP-PBX MIBs for shared enterprise definitions. It is deployed on Vertical Networks IP telephony systems (later part of Comdial/Vertical Communications) in small-to-midsize business phone deployments. Engineers can download the VERTICAL-STATION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VERTICAL-STATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Vertical Networks IP telephony system / IP-PBX
IP telephone station/handset

Monitoring Examples

With only the root object "vertical" given as a sample, the concrete station/extension tables cannot be named with confidence; a real deployment would poll a station table for registration status and current extension mapping and watch for stations dropping out of a registered state, which would indicate a handset or trunk problem. This description is necessarily general since detailed table names were not available in the source data.

What Can Be Monitored

station registration status
extension assignment
call/session state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Gauge
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
vertical	1.3.6.1.4.1.2338
NTF vStationCannotPlayTone	1.3.6.1.4.1.2338.0.12			This notification is sent when the specific channel cannot play tone.
NTF vStationCannotCancelTone	1.3.6.1.4.1.2338.0.13			This notification is sent when the specific channel cannot cancel tone.
NTF vStationCannotAttachDigitCollector	1.3.6.1.4.1.2338.0.14			This notification is sent when the specific channel cannot attach digits collected
NTF vStationCannotReleaseDigitCollector	1.3.6.1.4.1.2338.0.15			This notification is sent when the specific channel cannot release digits collected
NTF vStationRECONFIG_COMPLETE	1.3.6.1.4.1.2338.0.16			This notification is sent when the specific station device successfully reads and incorporates the values from the registry.
NTF vStationRECONFIG_ERROR	1.3.6.1.4.1.2338.0.17			This notification is sent when the specific station device fails to incorporate the values read from the registry.
vStationModule	1.3.6.1.4.1.2338.7
vStationCommonGroup	1.3.6.1.4.1.2338.7.1
INT vStationFirstDigitTimeout	1.3.6.1.4.1.2338.7.1.1	INTEGER	read-write	Specifies the maximum number of seconds to wait for the first digit.
INT vStationDigitTimeout	1.3.6.1.4.1.2338.7.1.2	INTEGER	read-write	Specifies the maximum number of seconds to wait between digits.
INT vStationOffHookTimeout	1.3.6.1.4.1.2338.7.1.3	INTEGER	read-write	Specifies the maximum number of seconds to wait for the user to hang up phone after call disconnects or user executes an invalid operation. Howler tone is applied at timeout.
INT vStationNumStationCards	1.3.6.1.4.1.2338.7.1.4	INTEGER	read-write	Specifies the number of station cards installed in the system.
STR vStationExternalDialDigit	1.3.6.1.4.1.2338.7.1.5	DisplayString	read-write	Identifies the starting digit for making an external call.
vStationCardGroup	1.3.6.1.4.1.2338.7.2
vStationCardTable	1.3.6.1.4.1.2338.7.2.1		not-accessible	Table of status, control and configuraion about cards containing station devices within the system. There are as many entries as there are cards containing station devices
vStationCardEntry	1.3.6.1.4.1.2338.7.2.1.1		not-accessible	An entry in the Vertical Station Card table.
INT vStationCardSlotNumber	1.3.6.1.4.1.2338.7.2.1.1.1	INTEGER	read-only	Physical slot in the system in which the card is installed.
INT vStationCardType	1.3.6.1.4.1.2338.7.2.1.1.2	INTEGER	read-only	The Vertical's card Type. The following types are defined: card-type-NOT-CONFIGURED = 0, card-type-24-CHANNEL-STATION = 2, card-type-BRIDGE1 = 4
INT vStationCardIOPortAddress	1.3.6.1.4.1.2338.7.2.1.1.3	INTEGER	read-only	The ISA bus base address for this Card.
INT vStationCardState	1.3.6.1.4.1.2338.7.2.1.1.4	INTEGER	read-only	The current status of the card. The valid values are 0 -> Disabled, 1 -> Enabled, 0xff -> Removed.
INT vStationCardErrorLED	1.3.6.1.4.1.2338.7.2.1.1.5	INTEGER	read-only	All Vertical cards have an ERROR LED and a READY LED. The combined values of these LEDs are as follows - ERRORLed READYLed VALUE OPERATIONAL DEFINITION OFF OFF (0 0) Invalid state ON OFF (1 0) Just after power up. This state remains until card is ready to service io. ON ON (1 1) Statue during software initialization OFF ON (0 1) The normal operational state of the card.
INT vStationCardReadyLED	1.3.6.1.4.1.2338.7.2.1.1.6	INTEGER	read-only	All Vertical cards have a READY LED and an ERROR LED. The combined values of these LEDs are as follows - ERRORLed READYLed OPERATIONAL DEFINITION OFF OFF invalid state ON OFF Just after power up. This state remains until card is ready to service io. ON ON Statue during software initialization OFF ON The normal operational state of the card.
vStationDeviceTable	1.3.6.1.4.1.2338.7.2.2		not-accessible	Table of status, control and configuraion about station devices within the system. There are as many entries as there are station devices.
vStationDeviceEntry	1.3.6.1.4.1.2338.7.2.2.1		not-accessible	An entry in the Vertical Station device Configuration table.
INT vStationDeviceSlotNumber	1.3.6.1.4.1.2338.7.2.2.1.1	INTEGER	read-only	Physical slot number inside the system in which the card containing this device is installed
INT vStationDeviceDeviceNumber	1.3.6.1.4.1.2338.7.2.2.1.2	INTEGER	read-only	The logical device number for this station device in its card.
INT vStationDeviceIfIndex	1.3.6.1.4.1.2338.7.2.2.1.3	INTEGER	read-only	The interface Index for this device. The value for this object correlates to the IfIndex found in MIB-II.
INT vStationDeviceBaseIOAddress	1.3.6.1.4.1.2338.7.2.2.1.4	INTEGER	read-only	The ISA bus base address for this Card.
INT vStationDeviceEnabled	1.3.6.1.4.1.2338.7.2.2.1.5	INTEGER	read-write	Setting this variable to Disabled will disable this particular station device.
INT vStationDeviceInterrupt	1.3.6.1.4.1.2338.7.2.2.1.6	INTEGER	read-only	Interrupt Request level for this card.
INT vStationDeviceNumChannels	1.3.6.1.4.1.2338.7.2.2.1.7	INTEGER	read-only	The ISA bus address for this Card.
INT vStationDeviceMVIPStartingChannel	1.3.6.1.4.1.2338.7.2.2.1.8	INTEGER	read-only	Vertical card revision level.
INT vStationDeviceMVIPStream	1.3.6.1.4.1.2338.7.2.2.1.9	INTEGER	read-only	Vertical card identification number.
INT vStationDeviceType	1.3.6.1.4.1.2338.7.2.2.1.10	INTEGER	read-only	Specifies the Type of this device Valid values are : dev-undef, // 0 : undefined dev-station, // 8 : Station channels
INT vStationDeviceChangePending	1.3.6.1.4.1.2338.7.2.2.1.11	INTEGER	read-write	Interrupt Request level for this card/trunk.
vStationChannelTable	1.3.6.1.4.1.2338.7.2.3		not-accessible	Table of status, control and configuraion about station device channels within the system. There is an entry for each channel of each station device.
vStationChannelEntry	1.3.6.1.4.1.2338.7.2.3.1		not-accessible	An entry in the Vertical Station device Configuration table.
INT vStationChannelIndex	1.3.6.1.4.1.2338.7.2.3.1.1	INTEGER	read-only	This is the logical channel number of the channel within its station device. For 12 channel station devices, it is between 1 and 12 and for 24 channel stations, it is between 1 and 24.
INT vStationChannelSlotNumber	1.3.6.1.4.1.2338.7.2.3.1.2	INTEGER	read-only	The value for this object is the logical number of the slot in which the card containing this channel is located (vStationDeviceSlotNumber).
INT vStationChannelDeviceNumber	1.3.6.1.4.1.2338.7.2.3.1.3	INTEGER	read-only	The value for this object is the logical device number of the device containing this channel within its slot, ie vStationDeviceDeviceNumber
INT vStationChannelChannelType	1.3.6.1.4.1.2338.7.2.3.1.4	INTEGER	read-write	The Channel Type. Valid values are 1 -> Loop Start
INT vStationChannelMWIType	1.3.6.1.4.1.2338.7.2.3.1.5	INTEGER	read-write	Defines the type of Message Waiting Indication. The valid values are : 1 -> stutter, 2 -> lamp.
INT vStationChannelOperationMode	1.3.6.1.4.1.2338.7.2.3.1.6	INTEGER	read-write	Defines the operation mode of the channel. Valid values are : 1 -> station, 2 -> voiceMail, 3 -> PBX.
INT vStationChannelState	1.3.6.1.4.1.2338.7.2.3.1.7	INTEGER	read-write	Indicates the operational status of this channel. Valid values are: 0 -> disabled, 1 -> enabled, 2 -> not configured
INT vStationChannelType	1.3.6.1.4.1.2338.7.2.3.1.8	INTEGER	read-write	The phone type for this particular channel. Valid values are: 1 -> basic, 2 -> callerID, 3 -> callerID-callWaiting (caller ID with call waiting).
INT vStationChannelCallState	1.3.6.1.4.1.2338.7.2.3.1.9	INTEGER	read-only	Indicates the phone call state of this channel. Valid values are: call-state-VOID (0), -> invalid state call-state-IDLE (1), -> the line is in idle state call-state-DIALING (2), -> the line is originating a call call-state-COLLECT-FIRST-DIGIT (3), -> waiting to collect the first digit call-state-COLLECT-DIGITS (4), -> collecting additional digits call-state-CALL-OFFERED (5), -> the station call request has been offered to the PBX control call-state-PROCEEDING (6), -> the call is in progress call-state-RINGING (7), -> the call has seized a destination line call-state-ALERTING (8), -> the destination has been seized call-state-CONNECTED (9), -> the destination has answered the call call-state-DISCONNECTING (10), -> the call is in the process of terminating call-state-FAILED (11), -> the call attempt failed, wait for hangup call-state-UNAVAILABLE (12), -> destination is not available to receive call call-state-OFFHOOK (13), -> the call has been completed but the phone is offhook call-state-INITIALIZE (14), -> initialize the call object (binds with Conn Mgr) call-state-INITIALIZING (15), -> waiting for the response from Conn Mgr (Inservice Ack) call-state-DIAL-REQUEST (16), -> call object sent up OffhookInd and waiting for ACK call-state-HELD (17), -> the call has been put on hold call-state-FEATURE-INVOKED (18), -> indications that a feature has been invoked and waiting response call-state-OFFHOOK-IDLE (19), -> indicates that the phone is set to offhook and is IDLE call-state-OFFHOOK-ACTIVE (20), -> indicates that the phone is set to offhook and is ACTIVE call-state-OUT-OF-SERVICE (21), -> indicates that the phone is out of service call-state-OUTPULSING (22), -> digits are being sent to the external key or voice mail system
STR vStationChannelCalledPartyNumber	1.3.6.1.4.1.2338.7.2.3.1.10	DisplayString	read-only	Indicates the called party number, either an internal extension or external number.
STR vStationChannelCallingPartyNumber	1.3.6.1.4.1.2338.7.2.3.1.11	DisplayString	read-only	Indicates the calling party number, either an internal extension or external number.
INT vStationChannelChangePending	1.3.6.1.4.1.2338.7.2.3.1.12	INTEGER	read-write	Indicates that a change to the channel values have been made to the registry. The intepretation of the values are : 1 => change made to the registry, but not incorporated in the device yet 0 => the device changes the value to 0 from 1, after it incorporates the value from registry.
vStationDigitTableGroup	1.3.6.1.4.1.2338.7.3
vStationFirstDigitTable	1.3.6.1.4.1.2338.7.3.1		not-accessible	Table of settings for each digits (0-9) which may be dialled as the first digit. There are 10 entries, one for each digit, in this table.
vStationFirstDigitEntry	1.3.6.1.4.1.2338.7.3.1.1		not-accessible	An entry in the Vertical Station First Digit Table.
INT vStationDigitIndex	1.3.6.1.4.1.2338.7.3.1.1.1	INTEGER	read-only	This is the index to an entry in the first digit table
STR vStationDigitString	1.3.6.1.4.1.2338.7.3.1.1.2	DisplayString	read-only	The first digit string . Valid values : '0' to '9'
INT vStationDigitCallType	1.3.6.1.4.1.2338.7.3.1.1.3	INTEGER	read-write	Type of call generated by this digit. Valid values are : fc-VOID (0), // undefined feature code fc-HOLD-CALL (1), fc-PARK-CALL (2), fc-STATION-CALL (3), fc-LONG-DISTANCE-CALL (4), fc-INTERNATIONAL-CALL (5), fc-LOCAL-CALL (6), fc-OPERATOR-CALL (7), fc-RECEPTIONIST-CALL (8), fc-CAMP-ON-CALL (9)
INT vStationDigitMoreDigits	1.3.6.1.4.1.2338.7.3.1.1.4	INTEGER	read-write	The number of additional digits to collect after the matched digits.
INT vStationDigitTimeout2	1.3.6.1.4.1.2338.7.3.1.1.5	INTEGER	read-write	Indicates whether the dialling should terminate on a timeout. valid values are : dontTerminate -> 0 terminate -> 1
INT vStationDigitStripDigits	1.3.6.1.4.1.2338.7.3.1.1.6	INTEGER	read-write	Indicates the number of leading digits to strip from the digitss collected before they are reported up to the connection manager.
vStationExtVoiceMailGroup	1.3.6.1.4.1.2338.7.4
vStationATTSystem25Group	1.3.6.1.4.1.2338.7.4.1
STR vStationMWILampON	1.3.6.1.4.1.2338.7.4.1.1	DisplayString	read-write	Command expected from the external voice mail system to turn on a station's lamp.
STR vStationMWILampOFF	1.3.6.1.4.1.2338.7.4.1.2	DisplayString	read-write	Command expected from the external voice mail system to turn off a station's lamp.
vStationVMCallHandleTable	1.3.6.1.4.1.2338.7.4.1.3		not-accessible	Table of settings and commands for accessing the voice mail port for different types of access, i.e. external caller coming directly to voice mail port, external caller being forwarded to a voice mail port, etc.
vStationVMCallHandleEntry	1.3.6.1.4.1.2338.7.4.1.3.1		not-accessible	An entry in the Vertical Station Voice Mail call handle table.
INT vStationVMCallHandleIndex	1.3.6.1.4.1.2338.7.4.1.3.1.1	INTEGER	read-only	This is the index to an entry in the Voice Mail call handle table.
INT vStationVMCallHandleType	1.3.6.1.4.1.2338.7.4.1.3.1.2	INTEGER	read-only	Indicates the type of access to voice mail port made. valid values are : directExternal (1) -> An external caller coming directly into the voice mail port. forwardExternal (2) -> An external caller caling an extension, but was then forwarded to the voice mail port. directInternal (3) -> An internal caller coming directly into the voice mail port. forwardInternal (4) -> An internal caller caling an extension, but was then forwarded to the voice mail port.
OCT vStationVMCallHandleOpcode	1.3.6.1.4.1.2338.7.4.1.3.1.3	OCTET STRING	read-write	The opcode string for this operation.
OCT vStationVMCallHandleSRCNumber	1.3.6.1.4.1.2338.7.4.1.3.1.4	OCTET STRING	read-write	The source number format string. It contains a C type '%s' where the source number would be filled in
OCT vStationVMCallHandleDSTNumber	1.3.6.1.4.1.2338.7.4.1.3.1.5	OCTET STRING	read-write	The destination number format string. It contains a C type '%s' where the destination number would be filled in

RFC description

Monitors configuration and status of Vertical Networks Instant Office station card modules.

Start monitoring Vertical Networks IP telephony system / IP-PBX, IP telephone station/handset (station registration/call-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VERTICAL-STATION-MIB

What Is VERTICAL-STATION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description