US-SRX-MGCP-MIB

All MIBs › US-SRX-MGCP-MIB

Organization: Siemens Network Convergence LLC

Last Updated: 2008-06-11

Category: VoIP and Telephony

Description: Manages Siemens SRX gateway MGCP media protocol sessions, endpoints, and call statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is US-SRX-MGCP-MIB?

US-SRX-MGCP-MIB is a Siemens Network Convergence (Surpass RTP platform) proprietary MIB counting MGCP (Media Gateway Control Protocol) connection-control-manager message traffic for PSTN gateway and circuit management. Its objects count Create/Modify/Delete-connection sent and acknowledgment-received messages, delete-connection received and ack-sent messages, restart-in-progress received/ack-sent, notify-request sent/ack-received, notify received/ack-sent, audit-endpoint and audit-connection sent/ack-received, endpoint-config sent/ack-received, MTA transient-error count, and per-error-code (500-503) counters. As a performance/protocol-status MIB it lets an administrator watch MGCP error-code counters to diagnose PSTN gateway signaling problems on a Surpass RTP softswitch. It is deployed on Siemens Surpass RTP-based softswitch platforms. Engineers can download the US-SRX-MGCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in US-SRX-MGCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens Surpass RTP-based softswitch platforms (MGCP)

Monitoring Examples

An administrator monitors usSrxMgcp500ErrorCounter alongside usSrxMgcpDeleteConnAckReceivedCounter to diagnose a rising rate of MGCP signaling errors affecting PSTN gateway calls on a Surpass RTP softswitch.

What Can Be Monitored

MGCP connection-control message and error counters

Imported Objects

From FSC-RTP-MIB

Boolean
TimeStampSeconds

From HIQ-ADMIN-MIB

IkeKey
IkeKeyGenMethod
IkeKeyLength
IkeKeyType
NameType
SrxOnOffType
SrxRowCountType

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

From SURPASS-RTP-ADMIN-MIB

hiq8000Admin

OBJECT-IDENTITY

From SURPASS-RTP-MIB

surpassRtp

MODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using usSrxMgcpCreateConnSentCounter OID:

Select a Siemens Surpass RTP-based softswitch platforms, MGCP (connection-control message/error-code counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usSrxMgcpCreateConnSentCounter into the Find box to locate it in the OID tree, then select it and click OK. This object refers to the counter of total create connection messages sent. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
usSrxMgcp	1.3.6.1.4.1.4329.2.18.2.2.1.3			SRX MGCP Connection Control Manager MIB Module which includes management of PSTN Gateway and PSTN Circuits.
C32 usSrxMgcp500ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.22	Counter32	read-only	This object refers to the counter of MGCP return code 500:The transaction could not be executed, because the endpoint is unknown.
C32 usSrxMgcp501ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.23	Counter32	read-only	This object refers to the counter of MGCP return code 501:The transaction could not be executed, because the endpoint is not ready. This includes the case where the endpoint is out-of-service.
C32 usSrxMgcp502ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.24	Counter32	read-only	This object refers to the counter of MGCP return code 502: The transaction could not be executed, because the endpoint does not have sufficient resources (permanent condition).
C32 usSrxMgcp503ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.25	Counter32	read-only	This object refers to the counter of MGCP return code 503: r'All of' wildcard too complicated.
C32 usSrxMgcp504ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.26	Counter32	read-only	This object refers to the counter of MGCP return code 504: Unknown or unsupported command.
C32 usSrxMgcp505ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.27	Counter32	read-only	This object refers to the counter of MGCP return code 505: Unsupported RemoteConnectionDescriptor. This SHOULD be used when one or more mandatory parameters or values in the RemoteConnectionDescriptor is not supported.
C32 usSrxMgcp506ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.28	Counter32	read-only	This object refers to the counter of MGCP return code 506: Unable to satisfy both LocalConnectionOptions and RemoteConnectionDescriptor. This SHOULD be used when the LocalConnectionOptions and RemoteConnectionDescriptor contain one or more mandatory parameters or values that conflict with each other and/or cannot be supported at the same time (except for codec negotiation failure - see error code 534).
C32 usSrxMgcp507ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.29	Counter32	read-only	This object refers to the counter of MGCP return code 507:Unsupported functionality. Some unspecified functionality required to carry out the command is not supported. Note that several other error codes have been defined for specific areas of unsupported functionality (e.g. 508, 511, etc.), and this error code SHOULD only be used if there is no other more specific error code for the unsupported functionality.
C32 usSrxMgcp508ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.30	Counter32	read-only	This object refers to the counter of MGCP return code 508: Unknown or unsupported quarantine handling.
C32 usSrxMgcp509ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.31	Counter32	read-only	This object refers to the counter of MGCP return code 509: Error in RemoteConnectionDescriptor. This SHOULD be used when there is a syntax or semantic error in the RemoteConnectionDescriptor.
C32 usSrxMgcp510ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.32	Counter32	read-only	This object refers to the counter of MGCP return code 510: The transaction could not be executed, because some unspecified protocol error was detected. Automatic recovery from such an error will be very difficult, and hence this code SHOULD only be used as a last resort.
C32 usSrxMgcp511ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.33	Counter32	read-only	This object refers to the counter of MGCP return code 511:The transaction could not be executed, because the command contained an unrecognized extension. This code SHOULD be used for unsupported critical parameter extensions.
C32 usSrxMgcp512ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.34	Counter32	read-only	This object refers to the counter of MGCP return code 512: The transaction could not be executed, because the gateway is not equipped to detect one of the requested events.
C32 usSrxMgcp513ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.35	Counter32	read-only	This object refers to the counter of MGCP return code 513: The transaction could not be executed, because the gateway is not equipped to generate one of the requested signals.
C32 usSrxMgcp514ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.36	Counter32	read-only	This object refers to the counter of MGCP return code 514: The transaction could not be executed, because the gateway cannot send the specified announcemen.
C32 usSrxMgcp515ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.37	Counter32	read-only	This object refers to the counter of MGCP return code 515: The transaction refers to an incorrect connection-id (may have been already deleted).
C32 usSrxMgcp516ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.38	Counter32	read-only	This object refers to the counter of MGCP return code 516: The transaction refers to an unknown call-id, or the call-id supplied is incorrect
C32 usSrxMgcp517ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.39	Counter32	read-only	This object refers to the counter of MGCP return code 517: Unsupported or invalid mode.
C32 usSrxMgcp518ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.40	Counter32	read-only	This object refers to the counter of MGCP return code 518: Unsupported or unknown package. It is RECOMMENDED to include a PackageList parameter with the list of supported packages in the response, especially if the response is generated by the Call Agent.
C32 usSrxMgcp519ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.41	Counter32	read-only	This object refers to the counter of MGCP return code 519: Endpoint does not have a digit map.
C32 usSrxMgcp520ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.42	Counter32	read-only	This object refers to the counter of MGCP return code 520: The transaction could not be executed, because the endpoint is 'restarting'. In most cases this would be a transient error, in which case, error code 405 SHOULD be used instead. The error code is only included here for backwards compatibility.
C32 usSrxMgcp521ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.43	Counter32	read-only	This object refers to the counter of MGCP return code 521: Endpoint redirected to another Call Agent. The associated redirection behavior is only well-defined when this response is issued for a RestartInProgress command.
C32 usSrxMgcp522ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.44	Counter32	read-only	This object refers to the counter of MGCP return code 522: such event or signal. The request referred to an event or signal that is not defined in the relevant package (which could be the default package).
C32 usSrxMgcp523ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.45	Counter32	read-only	This object refers to the counter of MGCP return code 523: Unknown action or illegal combination of actions.
C32 usSrxMgcp524ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.46	Counter32	read-only	This object refers to the counter of MGCP return code 524: Internal inconsistency in LocalConnectionOptions.
C32 usSrxMgcp525ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.47	Counter32	read-only	This object refers to the counter of MGCP return code 525: Unknown extension in LocalConnectionOptions. This code SHOULD be used for unsupported mandatory vendor extensions.
C32 usSrxMgcp526ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.48	Counter32	read-only	This object refers to the counter of MGCP return code 526: Insufficient bandwidth. In cases where this is a transient error, error code 404 SHOULD be used instead.
C32 usSrxMgcp527ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.49	Counter32	read-only	This object refers to the counter of MGCP return code 527: Missing RemoteConnectionDescriptor.
C32 usSrxMgcp528ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.50	Counter32	read-only	This object refers to the counter of MGCP return code 528: Incompatible protocol version.
C32 usSrxMgcp529ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.51	Counter32	read-only	This object refers to the counter of MGCP return code 529: Internal hardware failure.
C32 usSrxMgcp530ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.52	Counter32	read-only	This object refers to the counter of MGCP return code 530: CAS signaling protocol error.
C32 usSrxMgcp531ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.53	Counter32	read-only	This object refers to the counter of MGCP return code 531: Failure of a grouping of trunks (e.g., facility failure).
C32 usSrxMgcp532ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.54	Counter32	read-only	This object refers to the counter of MGCP return code 532: Unsupported value(s) in LocalConnectionOptions.
C32 usSrxMgcp533ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.55	Counter32	read-only	This object refers to the counter of MGCP return code 533: Response too large.
C32 usSrxMgcp534ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.56	Counter32	read-only	This object refers to the counter of MGCP return code 534: Codec negotiation failure.
C32 usSrxMgcp535ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.57	Counter32	read-only	This object refers to the counter of MGCP return code 535: Packetization period not supported.
C32 usSrxMgcp536ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.58	Counter32	read-only	This object refers to the counter of MGCP return code 536: Unknown or unsupported RestartMethod.
C32 usSrxMgcp537ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.59	Counter32	read-only	This object refers to the counter of MGCP return code 537: Unknown or unsupported digit map extension.
C32 usSrxMgcp538ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.60	Counter32	read-only	This object refers to the counter of MGCP return code 538: Event/signal parameter error
C32 usSrxMgcp539ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.61	Counter32	read-only	This object refers to the counter of MGCP return code 539: Invalid or unsupported command parameter. This code SHOULD only be used when the parameter is neither a package or vendor extension parameter.
C32 usSrxMgcp540ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.62	Counter32	read-only	This object refers to the counter of MGCP return code 540: Per endpoint connection limit exceeded.
C32 usSrxMgcp541ErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.63	Counter32	read-only	This object refers to the counter of MGCP return code 541: Invalid or unsupported LocalConnectionOptions. This code SHOULD only be used when the LocalConnectionOptions is neither a package nor a vendor extension LocalConnectionOptions.
C32 usSrxMgcpAuditConnAckReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.18	Counter32	read-only	This object refers to the counter of total audit connection acknowledgements received.
C32 usSrxMgcpAuditConnSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.17	Counter32	read-only	This object refers to the counter of total audit connection messages sent.
C32 usSrxMgcpAuditEndPointAckReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.16	Counter32	read-only	This object refers to the counter of total audit endpoint acknowledgements received.
C32 usSrxMgcpAuditEndPointSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.15	Counter32	read-only	This object refers to the counter of total audit endpoint messages sent.
C32 usSrxMgcpCreateConnAckReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.2	Counter32	read-only	This object refers to the counter of total create connection acknowledgements received.
C32 usSrxMgcpCreateConnSentCounterEx	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.1	Counter32	read-only	This object refers to the counter of total create connection messages sent.
C32 usSrxMgcpDeleteConnAckReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.6	Counter32	read-only	This object refers to the counter of total delete connection acknowledgements received.
C32 usSrxMgcpDeleteConnAckSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.8	Counter32	read-only	This object refers to the counter of total delete connection acknowledgements sent.
C32 usSrxMgcpDeleteConnReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.7	Counter32	read-only	This object refers to the counter of total delete connection messages received.
C32 usSrxMgcpDeleteConnSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.5	Counter32	read-only	This object refers to the counter of total delete connection messages sent.
C32 usSrxMgcpEndPointConfigAckReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.20	Counter32	read-only	This object refers to the counter of total endpoint Config acknowledgements received.
C32 usSrxMgcpEndPointConfigSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.19	Counter32	read-only	This object refers to the counter of total endpoint Config messages sent.
C32 usSrxMgcpModifyConnAckReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.4	Counter32	read-only	This object refers to the counter of total modify connection acknowledgements received.
C32 usSrxMgcpModifyConnSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.3	Counter32	read-only	This object refers to the counter of total modify connection messages sent.
C32 usSrxMgcpMTATransientErrorCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.21	Counter32	read-only	This object refers to the counter of MTA Transient Errors with ranges from 400-499
C32 usSrxMgcpNotifyAckSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.14	Counter32	read-only	This object refers to the counter of total notify acknowledgements sent.
C32 usSrxMgcpNotifyReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.13	Counter32	read-only	This object refers to the counter of total notify messages received.
C32 usSrxMgcpNotifyRequestAckReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.12	Counter32	read-only	This object refers to the counter of total notify request acknowledgements received.
C32 usSrxMgcpNotifyRequestSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.11	Counter32	read-only	This object refers to the counter of total notify request messages sent.
usSrxMgcpObjects	1.3.6.1.4.1.4329.2.18.2.2.1.3.1
usSrxMgcpPerformData	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1
C32 usSrxMgcpRestartInProgressAckSentCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.10	Counter32	read-only	This object refers to the counter of total Gateway Restart in Progress acknowledgements sent.
C32 usSrxMgcpRestartInProgressReceivedCounter	1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.9	Counter32	read-only	This object refers to the counter of total Gateway Restart in Progress messages received.

RFC description

A Juniper Networks SNMP MIB for managing MGCP (Media Gateway Control Protocol) functionality on Juniper SRX security appliances for VoIP and voice gateway management.

Start monitoring Siemens Surpass RTP-based softswitch platforms, MGCP (connection-control message/error-code counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download US-SRX-MGCP-MIB