All MIBs › Unisphere-Data-RADIUS-Client-CONF
Organization: Unisphere Networks, Inc.
Last Updated: 2001-10-19
Category: Juniper/Unisphere Broadband
Description: Specifies conformance requirements for Unisphere RADIUS client authentication configuration MIBs.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Unisphere-Data-RADIUS-Client-CONF?
This is an AGENT-CAPABILITIES conformance module for the RADIUS Client component of the SNMP agent on Unisphere ERX Data Routing Switch devices, covering authentication/authorization/accounting configuration. It declares which groups of the companion RADIUS Client MIB the ERX agent implements rather than exposing data directly. It has no bearing on runtime hardware/software health monitoring; its role is purely conformance declaration for AAA client support. It depends on the sibling Unisphere RADIUS Client MIB for its referenced groups. It is used by MIB tooling and NMS vendors validating RADIUS client monitoring support before deploying subscriber authentication services on ERX routers. Engineers can download the Unisphere-Data-RADIUS-Client-CONF file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-RADIUS-Client-CONF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper/Unisphere ERX Edge Router
- ERX Routing Switch family
Monitoring Examples
This module has no runtime data objects; it only declares AGENT-CAPABILITIES support for groups in the RADIUS Client MIB such as server configuration and accounting objects. It would be used during MIB compilation to confirm agent support, not for live SNMP polling. There is no realistic monitoring scenario for this module itself.
Imported Objects
From SNMPv2-CONF
| AGENT-CAPABILITIES |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-IDENTITY |
| usDataAgents | MODULE-IDENTITY |
From Unisphere-Data-RADIUS-CLIENT-MIB
| usdRadiusAcctClientGroup | OBJECT-GROUP |
| usdRadiusAuthClientGroup | OBJECT-GROUP |
| usdRadiusBasicClientGroup | OBJECT-GROUP |
| usdRadiusBasicClientGroup2 | OBJECT-GROUP |
| usdRadiusBrasClientGroup | OBJECT-GROUP |
| usdRadiusBrasClientGroup2 | OBJECT-GROUP |
| usdRadiusBrasClientGroup3 | OBJECT-GROUP |
| usdRadiusBrasClientGroup4 | OBJECT-GROUP |
| usdRadiusBrasClientGroup5 | OBJECT-GROUP |
| usdRadiusGeneralClientGroup | OBJECT-GROUP |
| usdRadiusGeneralClientGroup2 | OBJECT-GROUP |
| usdRadiusTunnelClientGroup | OBJECT-GROUP |
OIDs
RFC description
RADIUS client agent capabilities definition for dynamic interface support and authentication.
Start monitoring Juniper/Unisphere ERX Edge Router, ERX Routing Switch family (RADIUS-Client-agent conformance declaration, no data objects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.