Unisphere-Data-QoS-MIB

All MIBs › Unisphere-Data-QoS-MIB

Organization: Unisphere Networks, Inc.

Last Updated: 2002-05-10

Category: Juniper/Unisphere Broadband

Description: Manages quality-of-service policies, queuing, and traffic shaping on Unisphere ERX broadband routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Unisphere-Data-QoS-MIB?

Unisphere-Data-QoS-MIB is a Unisphere Networks (later Juniper Networks E-series/ERX) proprietary MIB providing hierarchical QoS (traffic class, queue, and scheduler profile) configuration for the Unisphere Routing Switch product family. Its objects cover platform-wide maximums for traffic classes/queue length/scheduler burst, current profile/interface counts, and a traffic-class table (name, weight, strict-priority flag, pending-update state, and whether it's referenced by a group or QoS profile). As a configuration/status MIB it lets an administrator audit and monitor hierarchical QoS (traffic class, queue, and scheduler profile) configuration on a Unisphere/Juniper E-series routing switch. It is deployed on Unisphere Networks (Juniper E-series/ERX) routing switches. Engineers can download the Unisphere-Data-QoS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-QoS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Unisphere Networks (Juniper E-series/ERX) routing switches

Monitoring Examples

An administrator reviews this MIB's objects to confirm hierarchical QoS (traffic class, queue, and scheduler profile) configuration is configured and operating as expected on a Unisphere/Juniper E-series routing switch.

What Can Be Monitored

hierarchical QoS (traffic class, queue, and scheduler profile) configuration

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

From Unisphere-Data-MIBs

usDataMibs

MODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using usdQosOutPacketForwarded OID:

Select an Unisphere Networks (Juniper E-series/ERX) routing switch (hierarchical QoS traffic-class/queue/scheduler config status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usdQosOutPacketForwarded into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of packets queued on this interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in packets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
usdQos	1.3.6.1.4.1.4874.2.2.57.1.2
usdQosCapability	1.3.6.1.4.1.4874.2.2.57.1.1
usdQosCapabilityGroup	1.3.6.1.4.1.4874.2.2.57.2.2.1			This group defines QoS application-wide saclar management.
usdQosCompliance	1.3.6.1.4.1.4874.2.2.57.2.1.1			The compliance statement for entities which implement the Unisphere QoS management MIB.
usdQosCompliances	1.3.6.1.4.1.4874.2.2.57.2.1
usdQosConformance	1.3.6.1.4.1.4874.2.2.57.2
usdQosGroups	1.3.6.1.4.1.4874.2.2.57.2.2
usdQosIfAttach	1.3.6.1.4.1.4874.2.2.57.1.10
usdQosIfAttachEntry	1.3.6.1.4.1.4874.2.2.57.1.10.1.1		not-accessible	Each entry contains the attachment of QoS to an interface.
usdQosIfAttachGroup	1.3.6.1.4.1.4874.2.2.57.2.2.9			This group defines QoS interface attachment management.
U32 usdQosIfAttachIndex	1.3.6.1.4.1.4874.2.2.57.1.10.1.1.1	Unsigned32	not-accessible	The interface number representing the interface to which QoS has been attached.
U32 usdQosIfAttachQosProfileIndex	1.3.6.1.4.1.4874.2.2.57.1.10.1.1.3	Unsigned32	read-create	The QoS profile attached to this interface.
ROW usdQosIfAttachRowStatus	1.3.6.1.4.1.4874.2.2.57.1.10.1.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy * LIMITED ACCESS LIST CONFIGURATION LEVEL * RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list. destroy Destroy the specified list and all of its constituent elements.
usdQosIfAttachTable	1.3.6.1.4.1.4874.2.2.57.1.10.1		not-accessible	This table contains entries which represent attachment of QoS to interfaces.
G32 usdQosInterfaceCount	1.3.6.1.4.1.4874.2.2.57.1.2.5	Gauge32	read-only	This object reflects the number of configured interface QoS attachments.
INT usdQosInterfaceType	1.3.6.1.4.1.4874.2.2.57.1.9.1.1.4	INTEGER	not-accessible	The QoS interface type ID, part of the index for usdQosProfileElementTable.
U32 usdQosMaxQueueLength	1.3.6.1.4.1.4874.2.2.57.1.1.2	Unsigned32	read-only	This object reflects the maximum supported queue length in bytes.
U32 usdQosMaxSchedulerBurst	1.3.6.1.4.1.4874.2.2.57.1.1.4	Unsigned32	read-only	This object reflects the maximum supported scheduler burst size in bytes.
U32 usdQosMaxTrafficClass	1.3.6.1.4.1.4874.2.2.57.1.1.1	Unsigned32	read-only	This object reflects the maximum number of traffic classes supported.
usdQosMIB	1.3.6.1.4.1.4874.2.2.57			The Quality of Service (QoS) MIB for the Unisphere Networks enterprise.
U32 usdQosMinSchedulerBurst	1.3.6.1.4.1.4874.2.2.57.1.1.3	Unsigned32	read-only	This object reflects the minimum supported scheduler burst size in bytes.
usdQosObjects	1.3.6.1.4.1.4874.2.2.57.1
C64 usdQosOutBytesForwarded	1.3.6.1.4.1.4874.2.2.57.1.12.1.1.2	Counter64	read-only	The number of bytes queued on this interface.
C64 usdQosOutGreenBytesSchedulerDrops	1.3.6.1.4.1.4874.2.2.57.1.12.1.1.6	Counter64	read-only	The number of green bytes dropped on this interface.
C64 usdQosOutGreenPacketsSchedulerDrops	1.3.6.1.4.1.4874.2.2.57.1.12.1.1.3	Counter64	read-only	The number of green packets dropped on this interface.
C64 usdQosOutPacketForwardedEx	1.3.6.1.4.1.4874.2.2.57.1.12.1.1.1	Counter64	read-only	The number of packets queued on this interface.
C64 usdQosOutRedBytesSchedulerDrops	1.3.6.1.4.1.4874.2.2.57.1.12.1.1.8	Counter64	read-only	The number of red bytes dropped on this interface.
C64 usdQosOutRedPacketsSchedulerDrops	1.3.6.1.4.1.4874.2.2.57.1.12.1.1.5	Counter64	read-only	The number of red packets dropped on this interface.
C64 usdQosOutYellowBytesSchedulerDrops	1.3.6.1.4.1.4874.2.2.57.1.12.1.1.7	Counter64	read-only	The number of yellow bytes dropped on this interface.
C64 usdQosOutYellowPacketsSchedulerDrops	1.3.6.1.4.1.4874.2.2.57.1.12.1.1.4	Counter64	read-only	The number of yellow packets dropped on this interface.
usdQosProfile	1.3.6.1.4.1.4874.2.2.57.1.8
G32 usdQosProfileCount	1.3.6.1.4.1.4874.2.2.57.1.2.4	Gauge32	read-only	This object reflects the number of configured QoS profiles.
usdQosProfileElement	1.3.6.1.4.1.4874.2.2.57.1.9
usdQosProfileElementEntry	1.3.6.1.4.1.4874.2.2.57.1.9.1.1		not-accessible	Each entry describes the characteristics of a QoS profile element.
U32 usdQosProfileElementEntryQueueProfile	1.3.6.1.4.1.4874.2.2.57.1.9.1.1.2	Unsigned32	read-create	Specifies the queue profile assigned to the QoS entry.
ROW usdQosProfileElementEntryRowStatus	1.3.6.1.4.1.4874.2.2.57.1.9.1.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry object MUST be explicitly configured: usdQosProfileRowStatus
U32 usdQosProfileElementEntrySchedulerProfile	1.3.6.1.4.1.4874.2.2.57.1.9.1.1.3	Unsigned32	read-create	Specifies the scheduler profile assigned to the QoS entry.
usdQosProfileElementGroup	1.3.6.1.4.1.4874.2.2.57.2.2.8			This group defines QoS profile elment entry management.
usdQosProfileElementTable	1.3.6.1.4.1.4874.2.2.57.1.9.1		not-accessible	This table contains entries for elements of QoS profile definitions.
usdQosProfileEntry	1.3.6.1.4.1.4874.2.2.57.1.8.2.1		not-accessible	Each entry describes the characteristics of a QoS profile element.
INT usdQosProfileEntryType	1.3.6.1.4.1.4874.2.2.57.1.9.1.1.5	INTEGER	not-accessible	The QoS profile type, part of the index for usdQosProfileElementTable.
U32 usdQosProfileIndex	1.3.6.1.4.1.4874.2.2.57.1.8.2.1.1	Unsigned32	not-accessible	The number identifies this QoS profile.
T/F usdQosProfileIsReferencedByInterfaceQosAttachment	1.3.6.1.4.1.4874.2.2.57.1.8.2.1.6	TruthValue	read-only	When true, the QoS profile is referenced by an interface QoS attachment.
T/F usdQosProfileIsReferencedByQosPortTypeProfile	1.3.6.1.4.1.4874.2.2.57.1.8.2.1.7	TruthValue	read-only	When true, the QoS profile is referenced by a QoS port type profile.
usdQosProfileListGroup	1.3.6.1.4.1.4874.2.2.57.2.2.7			This group defines QoS profile management.
STR usdQosProfileName	1.3.6.1.4.1.4874.2.2.57.1.8.2.1.3	DisplayString	read-create	Specifies the name of the QoS profile defined by this row.
U32 usdQosProfileNextIndex	1.3.6.1.4.1.4874.2.2.57.1.8.1	Unsigned32	read-only	This scalar object returns the index of the next available row in the usdQosProfileTable.
ROW usdQosProfileRowStatus	1.3.6.1.4.1.4874.2.2.57.1.8.2.1.2	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create a QoS profile in this table, the following entry objects MUST be explicitly configured: usdQosProfileRowStatus usdQosProfileName
usdQosProfileTable	1.3.6.1.4.1.4874.2.2.57.1.8.2		not-accessible	This table contains entries for elements of QoS Profile definitions.
T/F usdQosProfileUpdateNow	1.3.6.1.4.1.4874.2.2.57.1.8.2.1.5	TruthValue	read-create	When set to true, modifications made to the qos profile object will be committed to the line cards.
T/F usdQosProfileUpdatePending	1.3.6.1.4.1.4874.2.2.57.1.8.2.1.4	TruthValue	read-only	True if modifications have been made to the qos profile object which have not been committed to the line cards.
usdQosQosPortTypeProfile	1.3.6.1.4.1.4874.2.2.57.1.11
G32 usdQosQosPortTypeProfileCount	1.3.6.1.4.1.4874.2.2.57.1.2.6	Gauge32	read-only	This object reflects the number of configured default port profiles.
usdQosQosPortTypeProfileEntry	1.3.6.1.4.1.4874.2.2.57.1.11.1.1		not-accessible	Each entry contains the attachment of QoS to an interface.
usdQosQosPortTypeProfileGroup	1.3.6.1.4.1.4874.2.2.57.2.2.10			This group defines QoS default port profile management.
INT usdQosQosPortTypeProfileIndex	1.3.6.1.4.1.4874.2.2.57.1.11.1.1.1	INTEGER	not-accessible	The interface number representing the types of interface to which QoS has been attached.
U32 usdQosQosPortTypeProfileQosProfileIndex	1.3.6.1.4.1.4874.2.2.57.1.11.1.1.3	Unsigned32	read-create	The QoS profile assigned to this port type.
ROW usdQosQosPortTypeProfileRowStatus	1.3.6.1.4.1.4874.2.2.57.1.11.1.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy * LIMITED ACCESS LIST CONFIGURATION LEVEL * RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list. destroy Destroy the specified list and all of its constituent elements.
usdQosQosPortTypeProfileTable	1.3.6.1.4.1.4874.2.2.57.1.11.1		not-accessible	This table contains entries which represent attachment of QoS to interface types with which they are associated.
U32 usdQosQueueProfileBufferWeight	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.18	Unsigned32	read-create	The relative weight for queues in this traffic class.
U32 usdQosQueueProfileCommittedDropRate	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.13	Unsigned32	read-create	Specifies the drop rate (percent of traffic) for committed traffic.
U32 usdQosQueueProfileCommittedDropThreshold	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.12	Unsigned32	read-create	Specifies the drop threshold (percent of queue) for committed traffic.
U32 usdQosQueueProfileCommittedMaxLength	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.5	Unsigned32	read-create	Specifies the maximum queue length in bytes for committed traffic.
U32 usdQosQueueProfileCommittedMinLength	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.4	Unsigned32	read-create	Specifies the minimum queue length in bytes for committed traffic.
U32 usdQosQueueProfileConformedDropRate	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.15	Unsigned32	read-create	Specifies the drop rate (percent of traffic) for comformed traffic.
U32 usdQosQueueProfileConformedDropThreshold	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.14	Unsigned32	read-create	Specifies the drop threshold (percent of queue) for comformed traffic.
U32 usdQosQueueProfileConformedFraction	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.10	Unsigned32	read-create	Specifies the maximum percentage of queue occupied by conformed traffic.
U32 usdQosQueueProfileConformedMaxLength	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.7	Unsigned32	read-create	Specifies the maximum queue length in bytes for conformed traffic.
U32 usdQosQueueProfileConformedMinLength	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.6	Unsigned32	read-create	Specifies the minimum queue length in bytes for conformed traffic.
G32 usdQosQueueProfileCount	1.3.6.1.4.1.4874.2.2.57.1.2.2	Gauge32	read-only	This object reflects the number of configured queue profiles.
usdQosQueueProfileEntry	1.3.6.1.4.1.4874.2.2.57.1.7.2.1		not-accessible	Each entry describes the characteristics of a queue profile element.
U32 usdQosQueueProfileExceededDropRate	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.17	Unsigned32	read-create	Specifies the drop rate (percent of traffic) for exceeded traffic.
U32 usdQosQueueProfileExceededDropThreshold	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.16	Unsigned32	read-create	Specifies the drop threshold (percent of queue) for exceeded traffic.
U32 usdQosQueueProfileExceededFraction	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.11	Unsigned32	read-create	Specifies the maximum percentage of queue occupied by exceeded traffic.
U32 usdQosQueueProfileExceededMaxLength	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.9	Unsigned32	read-create	Specifies the maximum queue length in bytes for exceeded traffic.
U32 usdQosQueueProfileExceededMinLength	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.8	Unsigned32	read-create	Specifies the minimum queue length in bytes for exceeded traffic.
U32 usdQosQueueProfileIndex	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.1	Unsigned32	not-accessible	The number of the queue profile entry which is defined by this row.
T/F usdQosQueueProfileIsReferencedByQosProfile	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.21	TruthValue	read-only	When true, the queue profile is referenced by a QoS profile.
usdQosQueueProfileList	1.3.6.1.4.1.4874.2.2.57.1.7
usdQosQueueProfileListGroup	1.3.6.1.4.1.4874.2.2.57.2.2.5			This group defines QoS queue profile management.
STR usdQosQueueProfileName	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.3	DisplayString	read-create	Specifies the name of the queue profile defined by this row.
U32 usdQosQueueProfileNextIndex	1.3.6.1.4.1.4874.2.2.57.1.7.1	Unsigned32	read-only	This scalar object returns the index of the next available row in the usdQosQueueProfileTable.
ROW usdQosQueueProfileRowStatus	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.2	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: usdQosQueueProfileRowStatus usdQosQueueProfileName
usdQosQueueProfileTable	1.3.6.1.4.1.4874.2.2.57.1.7.2		not-accessible	This table contains entries for elements of queue profile definitions.
T/F usdQosQueueProfileUpdateNow	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.20	TruthValue	read-create	When set to true, modifications made to the queue profile object will be committed to the line cards.
T/F usdQosQueueProfileUpdatePending	1.3.6.1.4.1.4874.2.2.57.1.7.2.1.19	TruthValue	read-only	True if modifications have been made to the queue profile object which have not been committed to the line cards.
usdQosQueueStatistics	1.3.6.1.4.1.4874.2.2.57.1.12
usdQosQueueStatisticsEntry	1.3.6.1.4.1.4874.2.2.57.1.12.1.1		not-accessible	Each entry defines a single queue statistics entry.
usdQosQueueStatisticsGroup	1.3.6.1.4.1.4874.2.2.57.2.2.11			This group defines QoS queue statistics reporting.
usdQosQueueStatisticsTable	1.3.6.1.4.1.4874.2.2.57.1.12.1		not-accessible	Each entry within this table contains queue statistics for an interface/traffic class combination.
usdQosScalarGroup	1.3.6.1.4.1.4874.2.2.57.2.2.2			This group defines QoS application-wide saclar management.
U32 usdQosSchedulerProfileBurst	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.5	Unsigned32	read-create	Specifies the catch-up burst size in bytes.
G32 usdQosSchedulerProfileCount	1.3.6.1.4.1.4874.2.2.57.1.2.3	Gauge32	read-only	This object reflects the number of configured scheduler profiles.
usdQosSchedulerProfileEntry	1.3.6.1.4.1.4874.2.2.57.1.6.2.1		not-accessible	Each entry describes the characteristics of a scheduler profile element.
U32 usdQosSchedulerProfileIndex	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.1	Unsigned32	not-accessible	The number of the scheduler profile entry which is defined by this row.
T/F usdQosSchedulerProfileIsReferencedByQosProfile	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.10	TruthValue	read-only	When true, the scheduler profile is referenced by a QoS profile.
usdQosSchedulerProfileList	1.3.6.1.4.1.4874.2.2.57.1.6
usdQosSchedulerProfileListGroup	1.3.6.1.4.1.4874.2.2.57.2.2.6			This group defines QoS scheduler profile management.
STR usdQosSchedulerProfileName	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.3	DisplayString	read-create	Specifies the name of the scheduler profile defined by this row.
U32 usdQosSchedulerProfileNextIndex	1.3.6.1.4.1.4874.2.2.57.1.6.1	Unsigned32	read-only	This scalar object returns the index of the next available row in the usdQosSchedulerProfileTable.
ROW usdQosSchedulerProfileRowStatus	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.2	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: usdQosSchedulerProfileRowStatus usdQosSchedulerProfileName
U32 usdQosSchedulerProfileShapingRate	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.4	Unsigned32	read-create	Specifies the shaping rate in kilobits/second (kbps).
T/F usdQosSchedulerProfileStrictPriority	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.7	TruthValue	read-create	Specifies the traffic to be dequeued before all other scheduler nodes.
usdQosSchedulerProfileTable	1.3.6.1.4.1.4874.2.2.57.1.6.2		not-accessible	This table contains entries for elements of Scheduler Profile definitions.
T/F usdQosSchedulerProfileUpdateNow	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.9	TruthValue	read-create	When set to true, modifications made to the scheduler profile object will be committed to the line cards.
T/F usdQosSchedulerProfileUpdatePending	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.8	TruthValue	read-only	True if modifications have been made to the scheduler profile object which have not been committed to the line cards.
U32 usdQosSchedulerProfileWeight	1.3.6.1.4.1.4874.2.2.57.1.6.2.1.6	Unsigned32	read-create	The relative weight of the scheduler.
G32 usdQosTrafficClassCount	1.3.6.1.4.1.4874.2.2.57.1.2.1	Gauge32	read-only	This object reflects the number of configured traffic classes.
usdQosTrafficClassEntry	1.3.6.1.4.1.4874.2.2.57.1.3.2.1		not-accessible	Each entry describes the characteristics of a traffic class element.
usdQosTrafficClassGroupEntry	1.3.6.1.4.1.4874.2.2.57.1.4.2.1		not-accessible	Each entry describes the characteristics of a traffic class group element.
usdQosTrafficClassGroupEntryEntry	1.3.6.1.4.1.4874.2.2.57.1.5.1.1		not-accessible	Each entry ties a traffic class table entry to a traffic class group.
usdQosTrafficClassGroupEntryList	1.3.6.1.4.1.4874.2.2.57.1.5
ROW usdQosTrafficClassGroupEntryRowStatus	1.3.6.1.4.1.4874.2.2.57.1.5.1.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry object MUST be explicitly configured: usdQosTrafficClassGroupEntryRowStatus
usdQosTrafficClassGroupEntryTable	1.3.6.1.4.1.4874.2.2.57.1.5.1		not-accessible	This table identifies which traffic classes are in each traffic class group.
U32 usdQosTrafficClassGroupIndex	1.3.6.1.4.1.4874.2.2.57.1.4.2.1.1	Unsigned32	not-accessible	The number of the traffic class entry which is defined by this row.
T/F usdQosTrafficClassGroupIsReferencedByQosProfile	1.3.6.1.4.1.4874.2.2.57.1.4.2.1.6	TruthValue	read-only	When true, the traffic class group is referenced by a QoS profile.
usdQosTrafficClassGroupList	1.3.6.1.4.1.4874.2.2.57.1.4
usdQosTrafficClassGroupListGroup	1.3.6.1.4.1.4874.2.2.57.2.2.4			This group defines QoS traffic class group management.
STR usdQosTrafficClassGroupName	1.3.6.1.4.1.4874.2.2.57.1.4.2.1.3	DisplayString	read-create	Specifies the name of the traffic class group defined by this row.
U32 usdQosTrafficClassGroupNextIndex	1.3.6.1.4.1.4874.2.2.57.1.4.1	Unsigned32	read-only	This scalar object returns the index of the next available row in the usdQosTrafficClassGroupTable.
ROW usdQosTrafficClassGroupRowStatus	1.3.6.1.4.1.4874.2.2.57.1.4.2.1.2	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: usdQosTrafficClassGroupRowStatus usdQosTrafficClassGroupName
usdQosTrafficClassGroupTable	1.3.6.1.4.1.4874.2.2.57.1.4.2		not-accessible	This table contains entries for elements of Traffic Class group definitions.
T/F usdQosTrafficClassGroupUpdateNow	1.3.6.1.4.1.4874.2.2.57.1.4.2.1.5	TruthValue	read-create	When set to true, modifications made to the traffic class group object will be committed to the line cards.
T/F usdQosTrafficClassGroupUpdatePending	1.3.6.1.4.1.4874.2.2.57.1.4.2.1.4	TruthValue	read-only	True if modifications have been made to the traffic class group object which have not been committed to the line cards.
U32 usdQosTrafficClassIndex	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.1	Unsigned32	not-accessible	The number of the traffic class entry which is defined by this row.
T/F usdQosTrafficClassIsReferencedByGroup	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.8	TruthValue	read-only	When true, the traffic class is referenced by a traffic class group.
T/F usdQosTrafficClassIsReferencedByQosProfile	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.9	TruthValue	read-only	When true, the traffic class is referenced by a QoS profile.
usdQosTrafficClassList	1.3.6.1.4.1.4874.2.2.57.1.3
usdQosTrafficClassListGroup	1.3.6.1.4.1.4874.2.2.57.2.2.3			This group defines QoS traffic class management.
STR usdQosTrafficClassName	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.3	DisplayString	read-create	Specifies the name of the traffic class defined by this row.
U32 usdQosTrafficClassNextIndex	1.3.6.1.4.1.4874.2.2.57.1.3.1	Unsigned32	read-only	This scalar object returns the index of the next available row in the usdQosTrafficClassTable.
ROW usdQosTrafficClassRowStatus	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.2	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: usdQosTrafficClassRowStatus usdQosTrafficClassName
T/F usdQosTrafficClassStrictPriority	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.5	TruthValue	read-create	The traffic to be dequeued before all other classes.
usdQosTrafficClassTable	1.3.6.1.4.1.4874.2.2.57.1.3.2		not-accessible	This table contains entries for elements of Traffic Class definitions.
T/F usdQosTrafficClassUpdateNow	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.7	TruthValue	read-create	When set to true, modifications made to the traffic class object will be committed to the line cards.
T/F usdQosTrafficClassUpdatePending	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.6	TruthValue	read-only	True if modifications have been made to the traffic class object which have not been committed to the line cards.
U32 usdQosTrafficClassWeight	1.3.6.1.4.1.4874.2.2.57.1.3.2.1.4	Unsigned32	read-create	The relative weight for queues in this traffic class.

RFC description

Unisphere Networks Quality of Service MIB for enterprise QoS policy and traffic management configuration.

Start monitoring Unisphere Networks (Juniper E-series/ERX) routing switches (hierarchical QoS traffic-class/queue/scheduler config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Unisphere-Data-QoS-MIB