All MIBs › Unisphere-Data-PPPOE-PROFILE-MIB › usdPppoeProfileSetMap
usdPppoeProfileSetMap
Module: Unisphere-Data-PPPOE-PROFILE-MIB
OID (symbolic): Unisphere-Data-PPPOE-PROFILE-MIB::usdPppoeProfileSetMap
OID (numeric): 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2
Node type: OBJECT-TYPE
Type: UsdSetMap
Access: read-write
Description: A bitmap representing which objects in this entry have been explicitly configured. See the definition of the UsdSetMap TEXTUAL-CONVENTION for details of use.
The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set).
When a SET request does not explicitly configure UsdSetMap, bits in UsdSetMap are set as a side-effect of configuring other profile attributes in the same entry.
If, however, a SET request explicitly configures UsdSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur.
Once set, bits can only be cleared by explicitly configuring UsdSetMap.
What is usdPppoeProfileSetMap?
This value is a bitmap recording which objects in this PPPoE profile entry have been explicitly configured, as defined by the UsdSetMap textual convention. It matters because normally bits get set automatically as a side effect of configuring other profile attributes, but an explicit SET of this object overrides both prior bit settings and any simultaneous side-effect settings, and once set a bit can only be cleared by explicitly reconfiguring this object. For example, an admin might explicitly set the bitmap to lock in exactly which attributes count as "configured" independent of how individual fields were later edited.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2 snmpwalk -v2c -c public <target> Unisphere-Data-PPPOE-PROFILE-MIB::usdPppoeProfileSetMap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2.1 snmpget -v2c -c public <target> Unisphere-Data-PPPOE-PROFILE-MIB::usdPppoeProfileSetMap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2.1 s <value>
Start monitoring Juniper Networks (Unisphere/ERX) edge routers (PPPoE subscriber-profile session-limit config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-PPPOE-PROFILE-MIB::usdPppoeProfileSetMap OID value, configure state conditions and alerts, and monitor any Juniper Networks (Unisphere/ERX) edge routers (PPPoE subscriber-profile session-limit config status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.46 | juniPppoeProfileMIB | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.46.1 | juniPppoeProfileObjects | Juniper-PPPOE-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.46.1.1 | juniPppoeProfile | Juniper-PPPOE-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.46.1.1.1 | juniPppoeProfileTable | Juniper-PPPOE-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.46.1.1.1.1 | juniPppoeProfileEntry | Juniper-PPPOE-PROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2 | usdPppoeProfileSetMap | Unisphere-Data-PPPOE-PROFILE-MIB |