UBQS-CONFIG-MIB

All MIBs › UBQS-CONFIG-MIB

Organization: Ubiquoss Corp.

Last Updated: 2006-07-13

Category: Ubiquoss Enterprise Networking

Description: Manages Ubiquoss device configuration management including save, restore, and version control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBQS-CONFIG-MIB?

UBQS-CONFIG-MIB is a Ubiquoss vendor MIB that provides remote configuration-management mechanisms for an SNMP entity, letting a manager save, erase, or copy device configuration and manage configuration versions. It exposes configuration-lifecycle objects (ubiConfigErase, ubiConfigCopy) along with the standard notification and conformance branches for the module. Its monitoring/management value is software-configuration oriented: an operator uses it to trigger and verify configuration backup/restore operations and to be notified (via ubiConfigMIBNotificationPrefix-rooted traps) when a configuration erase or copy operation completes or fails, which is important for change-management auditing on the device. It conceptually parallels the standard SNMP-FRAMEWORK/agent configuration conventions but is implemented as a Ubiquoss-specific module rather than an IETF standard. It is deployed on Ubiquoss network devices (switches, OLTs) wherever remote configuration backup and restore via SNMP is required. Engineers can download the UBQS-CONFIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBQS-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss switch
Ubiquoss OLT

Monitoring Examples

An operator would set ubiConfigCopy to initiate copying the running or a saved configuration to another location (e.g. backup storage), and use ubiConfigErase to clear a stored configuration, then watch for a notification confirming success or failure of the operation. Repeated failed erase/copy attempts logged via the module's notifications would indicate a configuration-management problem on the device, such as insufficient storage or a locked configuration file.

What Can Be Monitored

configuration save/copy status
configuration erase status
configuration change notifications

Imported Objects

From IANAifType-MIB

IANAifType

From INET-ADDRESS-MIB

InetAddressType

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Integer32

From SNMPv2-TC

RowStatus

From UBQS-SMI

ubiMgmtv2

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubiConfigMIB	1.3.6.1.4.1.7800.100.18			This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity.
ubiConfigMIBNotificationPrefix	1.3.6.1.4.1.7800.100.18.0
ubiConfigMIBObjects	1.3.6.1.4.1.7800.100.18.1
ubiConfigInfoTable	1.3.6.1.4.1.7800.100.18.1.1		not-accessible	The table of configuration file list that consists of image and config
ubiConfigInfoEntry	1.3.6.1.4.1.7800.100.18.1.1.1		not-accessible	The entry representing one element of configuration file list
STR ubiConfigName	1.3.6.1.4.1.7800.100.18.1.1.1.1	DisplayString	read-only	Configuration file name or image name
INT ubiConfigType	1.3.6.1.4.1.7800.100.18.1.1.1.2	INTEGER	read-only	Configuration type config : configuration file image : image file other : other type file
INT ubiConfigCurrentStatus	1.3.6.1.4.1.7800.100.18.1.1.1.3	INTEGER	read-only	Current configuration file status
INT ubiConfigNextStatus	1.3.6.1.4.1.7800.100.18.1.1.1.4	INTEGER	read-write	Next configuration file status
ubiConfigErase	1.3.6.1.4.1.7800.100.18.1.2
INT ubiConfigEraseMode	1.3.6.1.4.1.7800.100.18.1.2.1	INTEGER	read-write	The type of object to be erased. To erase a file, value must be 1, 2 or 3. fileInFlash means config and image file at system flash and fileInUsbFlash means config and image file at USB flash.
STR ubiConfigEraseFileName	1.3.6.1.4.1.7800.100.18.1.2.2	DisplayString	read-write	If mode is 'configFile', configuration file name to be erased. startupConfig doesn't need this object
INT ubiConfigEraseOperate	1.3.6.1.4.1.7800.100.18.1.2.3	INTEGER	read-write	Excute to erase configuration
I32 ubiConfigEraseUsbPartNum	1.3.6.1.4.1.7800.100.18.1.2.4	Integer32	read-write	The number of USB flash partition which has a file to be erase. This object is only for when ubiConfigEraseMode is 'fileInUsbFlash'.
ubiConfigCopy	1.3.6.1.4.1.7800.100.18.1.3
CON ubiConfigSourceMethod	1.3.6.1.4.1.7800.100.18.1.3.1	ConfigMethodType	read-write	configuration source control method Represents 'copy '. each source method has possible destination methods. The mapping list below: source \| destination =================================================== startup-config \| running-config \| ftp \| tftp --------------------------------------------------- running-config \| startup-config \| ftp \| tftp \| flash \| usbflash --------------------------------------------------- ftp \| startup-config \| running-config \| flash \| config-file --------------------------------------------------- tftp \| startup-config \| running-config \| flash \| config-file --------------------------------------------------- flash \| ftp \| tftp \| flash \| usbflash --------------------------------------------------- usbflash \| flash \| usbflash ---------------------------------------------------
STR ubiConfigSourceFileName	1.3.6.1.4.1.7800.100.18.1.3.2	DisplayString	read-write	If not startup or running, source file name
STR ubiConfigSourceIpAddress	1.3.6.1.4.1.7800.100.18.1.3.3	DisplayString	read-write	If tftp or ftp, ip address to be connected
STR ubiConfigSouceUserId	1.3.6.1.4.1.7800.100.18.1.3.4	DisplayString	read-write	If ftp, server user id
STR ubiConfigSourceUserPassword	1.3.6.1.4.1.7800.100.18.1.3.5	DisplayString	read-write	If ftp, server user password
STR ubiConfigSourcePartNum	1.3.6.1.4.1.7800.100.18.1.3.6	DisplayString	read-write	If usbflash, system partition number
CON ubiConfigDestinationMethod	1.3.6.1.4.1.7800.100.18.1.3.7	ConfigMethodType	read-write	configuration destination control method Represents 'copy '. each source method has possible destination methods. The mapping list below: source \| destination =================================================== startup-config \| running-config \| ftp \| tftp --------------------------------------------------- running-config \| startup-config \| ftp \| tftp \| flash \| usbflash --------------------------------------------------- ftp \| startup-config \| running-config \| flash --------------------------------------------------- tftp \| startup-config \| running-config \| flash --------------------------------------------------- flash \| ftp \| tftp \| flash \| usbflash --------------------------------------------------- usbflash \| flash \| usbflash ---------------------------------------------------
STR ubiConfigDestinationFileName	1.3.6.1.4.1.7800.100.18.1.3.8	DisplayString	read-write	If startup or running, destination file name
STR ubiConfigDestinationIpAddress	1.3.6.1.4.1.7800.100.18.1.3.9	DisplayString	read-write	If ftp or tftp, server ip address
STR ubiConfigDestinationUserId	1.3.6.1.4.1.7800.100.18.1.3.10	DisplayString	read-write	If ftp, server user id
STR ubiConfigDestinationUserPassword	1.3.6.1.4.1.7800.100.18.1.3.11	DisplayString	read-write	If ftp, server user password
STR ubiConfigDestinationPartNum	1.3.6.1.4.1.7800.100.18.1.3.12	DisplayString	read-write	If usbflash, system partition number
INT ubiConfigCopyOperate	1.3.6.1.4.1.7800.100.18.1.3.13	INTEGER	read-write	excute to copy configuration
ubiUsbConfigInfoTable	1.3.6.1.4.1.7800.100.18.1.4		not-accessible	The table of configuration file list that consists of image and config at usbflash
ubiUsbConfigInfoEntry	1.3.6.1.4.1.7800.100.18.1.4.1		not-accessible	The entry representing one element of configuration file list at usbflash
I32 ubiUsbPartNum	1.3.6.1.4.1.7800.100.18.1.4.1.1	Integer32	read-only	The file system partition number for USB flash.
STR ubiUsbConfigName	1.3.6.1.4.1.7800.100.18.1.4.1.2	DisplayString	read-only	Configuration file name or image name
INT ubiUsbConfigType	1.3.6.1.4.1.7800.100.18.1.4.1.3	INTEGER	read-only	Configuration type config : configuration file image : image file other : other type file
INT ubiUsbConfigCurrentStatus	1.3.6.1.4.1.7800.100.18.1.4.1.4	INTEGER	read-only	Current configuration file status
INT ubiUsbConfigNextStatus	1.3.6.1.4.1.7800.100.18.1.4.1.5	INTEGER	read-write	Next configuration file status
ubiConfigMIBConformance	1.3.6.1.4.1.7800.100.18.2
ubiConfigMIBCompliances	1.3.6.1.4.1.7800.100.18.2.1
ubiConfigMIBCompliance	1.3.6.1.4.1.7800.100.18.2.1.1			The compliance statement for entities which implement the ubiquoss system configuration MIB.
ubiConfigMonMIBGroups	1.3.6.1.4.1.7800.100.18.2.2
ubiConfigMIBGroup	1.3.6.1.4.1.7800.100.18.2.2.1			ubiquoss system configuration.
ubiConfigMIBNotifGroup	1.3.6.1.4.1.7800.100.18.2.2.2			A notification group providing alarm notification for system configuration.

RFC description

Remote configuration parameter management for Ubiquoss SNMP network management entities.

Start monitoring Ubiquoss switch, Ubiquoss OLT (config backup/restore/erase operation status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBQS-CONFIG-MIB

What Is UBQS-CONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description