UBQS-CONFIG-MIB :: ubiConfigSourceMethod

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › UBQS-CONFIG-MIB › ubiConfigSourceMethod

ubiConfigSourceMethod

Module: UBQS-CONFIG-MIB

OID (symbolic): UBQS-CONFIG-MIB::ubiConfigSourceMethod

OID (numeric): 1.3.6.1.4.1.7800.100.18.1.3.1

Node type: OBJECT-TYPE

Type: ConfigMethodType

Access: read-write

Description: configuration source control method Represents 'copy '. each source method has possible destination methods. The mapping list below: source | destination =================================================== startup-config | running-config | ftp | tftp --------------------------------------------------- running-config | startup-config | ftp | tftp | flash | usbflash --------------------------------------------------- ftp | startup-config | running-config | flash | config-file --------------------------------------------------- tftp | startup-config | running-config | flash | config-file --------------------------------------------------- flash | ftp | tftp | flash | usbflash --------------------------------------------------- usbflash | flash | usbflash ---------------------------------------------------

What is ubiConfigSourceMethod?

Selects the source of a configuration copy operation -- e.g. startup-config, running-config, ftp, tftp, flash, or usbflash -- as the first half of a 'copy <source> <destination>' operation; valid destinations depend on which source is chosen.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.18.1.3.1
snmpwalk -v2c -c public <target> UBQS-CONFIG-MIB::ubiConfigSourceMethod

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.18.1.3.1.1
snmpget -v2c -c public <target> UBQS-CONFIG-MIB::ubiConfigSourceMethod.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.18.1.3.1.1 s <value>

Start monitoring Ubiquoss switch, Ubiquoss OLT (config backup/restore/erase operation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-CONFIG-MIB::ubiConfigSourceMethod OID value, configure state conditions and alerts, and monitor any Ubiquoss switch, Ubiquoss OLT (config backup/restore/erase operation status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7800ubiquossUBIQUOSS-SMI
1.3.6.1.4.1.7800.100ubiMgmtv2UBQS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.7800.100.18ubiConfigMIBUBQS-CONFIG-MIB
1.3.6.1.4.1.7800.100.18.1ubiConfigMIBObjectsUBQS-CONFIG-MIB
1.3.6.1.4.1.7800.100.18.1.3ubiConfigCopyUBQS-CONFIG-MIB
1.3.6.1.4.1.7800.100.18.1.3.1ubiConfigSourceMethodUBQS-CONFIG-MIB

Module

This MIB depends on