Telematics-Nevada-MIB

All MIBs › Telematics-Nevada-MIB

Category: Telecommunications Equipment

Description: Manages Telematics Nevada device operational parameters, status reporting, and remote monitoring capabilities.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Telematics-Nevada-MIB?

Telematics-Nevada-MIB (from Telematics Inc.'s 'Nevada' product line) manages device operational parameters and status reporting for network access/routing equipment, exposing detailed node-level buffer, CPU, and packet-rate statistics. Its data centers on internal resource accounting: buffer pool usage (total/current/minimum/free buffers), CPU headroom (current/min/max CPU), and traffic rates (receive/transmit packets per second, average and current). This is a clear hardware/software performance-monitoring MIB: an administrator uses it to watch for buffer exhaustion, CPU starvation, or abnormal packet-rate spikes/drops that indicate the device is overloaded or a link has failed. There is no indication of dependency on other standard MIBs; the objects live under the vendor's own telematics/tmxNevada/nevadaSystem branch. It is typically deployed on Telematics Nevada-series network access or routing devices in carrier or enterprise WAN environments, where a Telematics-Nevada-MIB download provides the object definitions needed to load into a monitoring system or MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Telematics-Nevada-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Telematics Nevada-series network access/routing device

Monitoring Examples

An administrator would poll nvNodestatFreebufs against nvNodestatTotalbufs to check for buffer exhaustion, and nvNodestatCurmincpu/nvNodestatMincpu against nvNodestatMaxcpu to gauge how close the device is to CPU saturation. Comparing nvNodestatRxcurpps and nvNodestatTxcurpps to their nvNodestatRxavgpps/nvNodestatTxavgpps baselines would reveal a sudden traffic spike or drop, and nvNodestatCurtime provides the timestamp context for the sample.

What Can Be Monitored

free/total buffer counts
current and minimum CPU availability
receive/transmit packet rate (current and average)
node timestamp

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
nevadaAdmin	1.3.6.1.4.1.230.5.65
nevadaApacs	1.3.6.1.4.1.230.5.50
nevadaElx	1.3.6.1.4.1.230.5.15
nevadaFrameRelay	1.3.6.1.4.1.230.5.5
nevadaFtp	1.3.6.1.4.1.230.5.18
nevadaIp	1.3.6.1.4.1.230.5.16
nevadaIsdn	1.3.6.1.4.1.230.5.11
nevadaIti	1.3.6.1.4.1.230.5.6
nevadaL2tp	1.3.6.1.4.1.230.5.70
nevadaModels	1.3.6.1.4.1.230.5.2
nevadaPos	1.3.6.1.4.1.230.5.66
nevadaPpp	1.3.6.1.4.1.230.5.12
nevadaR2	1.3.6.1.4.1.230.5.55
nevadaRadius	1.3.6.1.4.1.230.5.40
nevadaRb	1.3.6.1.4.1.230.5.58
nevadaSnmp	1.3.6.1.4.1.230.5.45
nevadaSync	1.3.6.1.4.1.230.5.7
nevadaSystem	1.3.6.1.4.1.230.5.1
nevadaTcp	1.3.6.1.4.1.230.5.17
nevadaTelnet	1.3.6.1.4.1.230.5.20
nevadaTraps	1.3.6.1.4.1.230.5.64
nevadaX25	1.3.6.1.4.1.230.5.10
nvAbillstat	1.3.6.1.4.1.230.5.50.3
INT nvAbillstatB1call	1.3.6.1.4.1.230.5.50.3.3.1.8	INTEGER	read-only	Number of calls greater than call duration timer b1
INT nvAbillstatB1time	1.3.6.1.4.1.230.5.50.3.3.1.9	INTEGER	read-only	Total time for calls greater than timer b1 (100th of sec)
INT nvAbillstatB2call	1.3.6.1.4.1.230.5.50.3.3.1.10	INTEGER	read-only	Number of calls greater than call duration timer b2
INT nvAbillstatB2time	1.3.6.1.4.1.230.5.50.3.3.1.11	INTEGER	read-only	Total time for calls greater than timer b2 (100th of sec)
INT nvAbillstatB3call	1.3.6.1.4.1.230.5.50.3.3.1.12	INTEGER	read-only	Number of calls greater than call duration timer b3
INT nvAbillstatB3time	1.3.6.1.4.1.230.5.50.3.3.1.13	INTEGER	read-only	Total time for calls greater than timer b3 (100th of sec)
INT nvAbillstatB4call	1.3.6.1.4.1.230.5.50.3.3.1.14	INTEGER	read-only	Number of calls greater than call duration timer b4
INT nvAbillstatB4time	1.3.6.1.4.1.230.5.50.3.3.1.15	INTEGER	read-only	Total time for calls greater than timer b4 (100th of sec)
INT nvAbillstatB5call	1.3.6.1.4.1.230.5.50.3.3.1.16	INTEGER	read-only	Number of calls greater than call duration timer b5
INT nvAbillstatB5time	1.3.6.1.4.1.230.5.50.3.3.1.17	INTEGER	read-only	Total time for calls greater than timer b5 (100th of sec)
INT nvAbillstatB6call	1.3.6.1.4.1.230.5.50.3.3.1.18	INTEGER	read-only	Number of calls greater than call duration timer b7
INT nvAbillstatB6time	1.3.6.1.4.1.230.5.50.3.3.1.19	INTEGER	read-only	Total time for calls greater than timer b6 (100th of sec)
INT nvAbillstatB7call	1.3.6.1.4.1.230.5.50.3.3.1.20	INTEGER	read-only	Number of calls greater than call duration timer b7
INT nvAbillstatB7time	1.3.6.1.4.1.230.5.50.3.3.1.21	INTEGER	read-only	Total time for calls greater than timer b7 (100th of sec)
STR nvAbillstatDtreset	1.3.6.1.4.1.230.5.50.3.3.1.41	DisplayString	read-only	date & time statistics last reset
nvAbillstatEntry	1.3.6.1.4.1.230.5.50.3.3.1		not-accessible	Abillstat record.
INT nvAbillstatIndex	1.3.6.1.4.1.230.5.50.3.3.1.1	INTEGER	read-only	Index of Abillstat record
INT nvAbillstatMaxRec	1.3.6.1.4.1.230.5.50.3.1	INTEGER	read-only	total number of records allowed in database file.
STR nvAbillstatNua	1.3.6.1.4.1.230.5.50.3.3.1.2	DisplayString	read-only	Network User Address
INT nvAbillstatNumRec	1.3.6.1.4.1.230.5.50.3.2	INTEGER	read-only	number of records in use.
INT nvAbillstatP1call	1.3.6.1.4.1.230.5.50.3.3.1.27	INTEGER	read-only
INT nvAbillstatP1time	1.3.6.1.4.1.230.5.50.3.3.1.28	INTEGER	read-only
INT nvAbillstatP2call	1.3.6.1.4.1.230.5.50.3.3.1.29	INTEGER	read-only
INT nvAbillstatP2time	1.3.6.1.4.1.230.5.50.3.3.1.30	INTEGER	read-only
INT nvAbillstatP3call	1.3.6.1.4.1.230.5.50.3.3.1.31	INTEGER	read-only
INT nvAbillstatP3time	1.3.6.1.4.1.230.5.50.3.3.1.32	INTEGER	read-only
INT nvAbillstatP4call	1.3.6.1.4.1.230.5.50.3.3.1.33	INTEGER	read-only
INT nvAbillstatP4time	1.3.6.1.4.1.230.5.50.3.3.1.34	INTEGER	read-only
INT nvAbillstatP5call	1.3.6.1.4.1.230.5.50.3.3.1.35	INTEGER	read-only
INT nvAbillstatP5time	1.3.6.1.4.1.230.5.50.3.3.1.36	INTEGER	read-only
INT nvAbillstatP6call	1.3.6.1.4.1.230.5.50.3.3.1.37	INTEGER	read-only
INT nvAbillstatP6time	1.3.6.1.4.1.230.5.50.3.3.1.38	INTEGER	read-only
INT nvAbillstatP7call	1.3.6.1.4.1.230.5.50.3.3.1.39	INTEGER	read-only
INT nvAbillstatP7time	1.3.6.1.4.1.230.5.50.3.3.1.40	INTEGER	read-only
INT nvAbillstatPbcalls	1.3.6.1.4.1.230.5.50.3.3.1.22	INTEGER	read-only
INT nvAbillstatPbtime	1.3.6.1.4.1.230.5.50.3.3.1.23	INTEGER	read-only
INT nvAbillstatPfail	1.3.6.1.4.1.230.5.50.3.3.1.24	INTEGER	read-only
INT nvAbillstatPrxbytes	1.3.6.1.4.1.230.5.50.3.3.1.26	INTEGER	read-only
INT nvAbillstatPtxbytes	1.3.6.1.4.1.230.5.50.3.3.1.25	INTEGER	read-only
INT nvAbillstatRxbytes	1.3.6.1.4.1.230.5.50.3.3.1.7	INTEGER	read-only	Number of bytes of data received from this nua
nvAbillstatTable	1.3.6.1.4.1.230.5.50.3.3		not-accessible	Abillstat file.
INT nvAbillstatTbcalls	1.3.6.1.4.1.230.5.50.3.3.1.3	INTEGER	read-only	Total number of calls to this nua
INT nvAbillstatTbtime	1.3.6.1.4.1.230.5.50.3.3.1.4	INTEGER	read-only	Total time to this nua in 100th of second
INT nvAbillstatTfail	1.3.6.1.4.1.230.5.50.3.3.1.5	INTEGER	read-only	Number of failed call request
INT nvAbillstatTxbytes	1.3.6.1.4.1.230.5.50.3.3.1.6	INTEGER	read-only	Number of bytes of data Transmitted to this nua
nvAcctoper	1.3.6.1.4.1.230.5.1.4
STR nvAcctoperComponent	1.3.6.1.4.1.230.5.1.4.3.1.2	DisplayString	read-only	service component This is the name of the component that uses the accounting service. An example of this is NET1,ITI,etc. Parameter is set during factory configuration.
INT nvAcctoperEnable	1.3.6.1.4.1.230.5.1.4.3.1.3	INTEGER	read-write	enable/disable This field is used to enable the accounting function. Default value is true (1+1).
nvAcctoperEntry	1.3.6.1.4.1.230.5.1.4.3.1		not-accessible	acctoper record.
INT nvAcctoperIndex	1.3.6.1.4.1.230.5.1.4.3.1.1	INTEGER	read-only	Index of acctoper record
INT nvAcctoperMaxRec	1.3.6.1.4.1.230.5.1.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvAcctoperNumRec	1.3.6.1.4.1.230.5.1.4.2	INTEGER	read-only	number of records in use.
INT nvAcctoperSegsize	1.3.6.1.4.1.230.5.1.4.3.1.4	INTEGER	read-write	segment size This field defines the size of a segment. A segment is usually a portion of a packet (ie. 64 bytes) as is more representative in actual accounting of resource utilization. The possible values range from one to the largest possible packet size. Default value is 64.
nvAcctoperTable	1.3.6.1.4.1.230.5.1.4.3		not-accessible	acctoper file.
nvAcctstat	1.3.6.1.4.1.230.5.1.3
CTR nvAcctstat64krxchars	1.3.6.1.4.1.230.5.1.3.3.1.17	Counter	read-only	1000 received characters Statistic is zeroed at startup time.
CTR nvAcctstat64krxpaks	1.3.6.1.4.1.230.5.1.3.3.1.13	Counter	read-only	1000 received packets Statistic is zeroed at startup time.
CTR nvAcctstat64krxsegs	1.3.6.1.4.1.230.5.1.3.3.1.21	Counter	read-only	1000 received segments Statistic is zeroed at startup time.
CTR nvAcctstat64ktxchars	1.3.6.1.4.1.230.5.1.3.3.1.15	Counter	read-only	1000 transmitted characters Statistic is zeroed at startup time.
CTR nvAcctstat64ktxpaks	1.3.6.1.4.1.230.5.1.3.3.1.11	Counter	read-only	1000 transmitted packets Statistic is zeroed at startup time.
CTR nvAcctstat64ktxsegs	1.3.6.1.4.1.230.5.1.3.3.1.19	Counter	read-only	1000 transmitted segments Statistic is zeroed at startup time.
INT nvAcctstatAbstime	1.3.6.1.4.1.230.5.1.3.3.1.22	INTEGER	read-only	starting absolute time Statistic is zeroed at startup time.
STR nvAcctstatCalled	1.3.6.1.4.1.230.5.1.3.3.1.3	DisplayString	read-only	Called address (from bcd)
INT nvAcctstatCallid	1.3.6.1.4.1.230.5.1.3.3.1.24	INTEGER	read-only	Ptr to internal structure that starts accounting
STR nvAcctstatCalling	1.3.6.1.4.1.230.5.1.3.3.1.4	DisplayString	read-only	Calling address (from bcd).
STR nvAcctstatComponent	1.3.6.1.4.1.230.5.1.3.3.1.1	DisplayString	read-only	name of component This is the name of component accumulating the statistics.
INT nvAcctstatDay	1.3.6.1.4.1.230.5.1.3.3.1.7	INTEGER	read-only	date of call establishment (internal) Statistic is zeroed at startup time.
STR nvAcctstatDtreset	1.3.6.1.4.1.230.5.1.3.3.1.23	DisplayString	read-only	date & time statistics last reset
nvAcctstatEntry	1.3.6.1.4.1.230.5.1.3.3.1		not-accessible	acctstat record, indexed by record number
INT nvAcctstatInfofunc	1.3.6.1.4.1.230.5.1.3.3.1.25	INTEGER	read-only	Information function ptr provided by accounting entity
INT nvAcctstatMaxRec	1.3.6.1.4.1.230.5.1.3.1	INTEGER	read-only	total number of records in file.
INT nvAcctstatMinute	1.3.6.1.4.1.230.5.1.3.3.1.8	INTEGER	read-only	time of call establishment Statistic is zeroed at startup time.
INT nvAcctstatNumRec	1.3.6.1.4.1.230.5.1.3.2	INTEGER	read-only	number of records in use.
INT nvAcctstatRecord	1.3.6.1.4.1.230.5.1.3.3.1.2	INTEGER	read-only	record ID This is the internal number of the accounting record.
INT nvAcctstatRecorg	1.3.6.1.4.1.230.5.1.3.3.1.5	INTEGER	read-only	call origin: 1=iti/lserv 2=x25 .
CTR nvAcctstatRxchars	1.3.6.1.4.1.230.5.1.3.3.1.16	Counter	read-only	number received characters Statistic is zeroed at startup time.
CTR nvAcctstatRxpaks	1.3.6.1.4.1.230.5.1.3.3.1.12	Counter	read-only	number received packets Statistic is zeroed at startup time.
CTR nvAcctstatRxsegs	1.3.6.1.4.1.230.5.1.3.3.1.20	Counter	read-only	number received segments Statistic is zeroed at startup time.
INT nvAcctstatSecond	1.3.6.1.4.1.230.5.1.3.3.1.9	INTEGER	read-only	time of call establishment Statistic is zeroed at startup time.
INT nvAcctstatSegsize	1.3.6.1.4.1.230.5.1.3.3.1.6	INTEGER	read-only	segment size This is the segment size of this port that generates accounting. Statistic is zeroed at startup time.
nvAcctstatTable	1.3.6.1.4.1.230.5.1.3.3		not-accessible	acctstat file.
CTR nvAcctstatTxchars	1.3.6.1.4.1.230.5.1.3.3.1.14	Counter	read-only	number transmitted characters Statistic is zeroed at startup time.
CTR nvAcctstatTxpaks	1.3.6.1.4.1.230.5.1.3.3.1.10	Counter	read-only	number transmitted packets Statistic is zeroed at startup time.
CTR nvAcctstatTxsegs	1.3.6.1.4.1.230.5.1.3.3.1.18	Counter	read-only	number transmitted segments Statistic is zeroed at startup time.
nvAnuaconf	1.3.6.1.4.1.230.5.50.2
STR nvAnuaconfAltLabel	1.3.6.1.4.1.230.5.50.2.3.1.5	DisplayString	read-write	indicates the label1 of the anuaconf record to be used for redirection
nvAnuaconfEntry	1.3.6.1.4.1.230.5.50.2.3.1		not-accessible	Anuaconf record.
INT nvAnuaconfIndex	1.3.6.1.4.1.230.5.50.2.3.1.1	INTEGER	read-only	Index of Anuaconf record
STR nvAnuaconfLabel1	1.3.6.1.4.1.230.5.50.2.3.1.2	DisplayString	read-write	Identifier to match alternate label in case of redirection
INT nvAnuaconfMaxpsze	1.3.6.1.4.1.230.5.50.2.3.1.10	INTEGER	read-write	Maximum message size default value is 256
INT nvAnuaconfMaxRec	1.3.6.1.4.1.230.5.50.2.1	INTEGER	read-only	total number of records allowed in database file.
STR nvAnuaconfNuaAddress	1.3.6.1.4.1.230.5.50.2.3.1.4	DisplayString	read-write	Null terminated ascii string, used ot match the address string received from the terminal and/or the x.121 address of the x.25 call placed to the host
INT nvAnuaconfNumRec	1.3.6.1.4.1.230.5.50.2.2	INTEGER	read-only	number of records in use.
INT nvAnuaconfPreempt	1.3.6.1.4.1.230.5.50.2.3.1.9	INTEGER	read-write	Call preemption indication default value is no
INT nvAnuaconfRedirect	1.3.6.1.4.1.230.5.50.2.3.1.7	INTEGER	read-write	Condition for redirecting call default value is no
STR nvAnuaconfReserve1	1.3.6.1.4.1.230.5.50.2.3.1.3	DisplayString	read-only	OBSOLETE - removed field.
INT nvAnuaconfRetries	1.3.6.1.4.1.230.5.50.2.3.1.8	INTEGER	read-write	number of call retries default value is 2
INT nvAnuaconfRsvrReverse	1.3.6.1.4.1.230.5.50.2.3.1.6	INTEGER	read-write	reverse charging indication default value is no
INT nvAnuaconfStatus	1.3.6.1.4.1.230.5.50.2.3.1.12	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
INT nvAnuaconfStrippar	1.3.6.1.4.1.230.5.50.2.3.1.11	INTEGER	read-write	Strip parity bit ? default value is no
nvAnuaconfTable	1.3.6.1.4.1.230.5.50.2.3		not-accessible	Anuaconf file.
nvApacsconf	1.3.6.1.4.1.230.5.50.1
INT nvApacsconfBillingT1	1.3.6.1.4.1.230.5.50.1.3.1.6	INTEGER	read-write	Call duration timer limit for billing ( in 100th secs ) Default value of 500
INT nvApacsconfBillingT2	1.3.6.1.4.1.230.5.50.1.3.1.7	INTEGER	read-write	Call duration timer limit for billing ( in 100th secs ) Default value of 1000
INT nvApacsconfBillingT3	1.3.6.1.4.1.230.5.50.1.3.1.8	INTEGER	read-write	Call duration timer limit for billing ( in 100th secs ) Default value of 1500
INT nvApacsconfBillingT4	1.3.6.1.4.1.230.5.50.1.3.1.9	INTEGER	read-write	Call duration timer limit for billing ( in 100th secs ) Default value of 2000
INT nvApacsconfBillingT5	1.3.6.1.4.1.230.5.50.1.3.1.10	INTEGER	read-write	Call duration timer limit for billing ( in 100th secs ) Default value of 3000
INT nvApacsconfBillingT6	1.3.6.1.4.1.230.5.50.1.3.1.11	INTEGER	read-write	Call duration timer limit for billing ( in 100th secs ) Default value of 6000
INT nvApacsconfDlrtries	1.3.6.1.4.1.230.5.50.1.3.1.13	INTEGER	read-write	number of retries to deliver data before disconnecting Default value of 0 -- nevada retries 6 times by default
INT nvApacsconfDscdleeot	1.3.6.1.4.1.230.5.50.1.3.1.17	INTEGER	read-write
nvApacsconfEntry	1.3.6.1.4.1.230.5.50.1.3.1		not-accessible	Apacsconf record.
STR nvApacsconfHelpphone	1.3.6.1.4.1.230.5.50.1.3.1.4	DisplayString	read-write	For display purpose in INF help message. Phone number of cardway help desk
INT nvApacsconfIndex	1.3.6.1.4.1.230.5.50.1.3.1.1	INTEGER	read-only	Index of Apacsconf record
INT nvApacsconfMaxRec	1.3.6.1.4.1.230.5.50.1.1	INTEGER	read-only	total number of records allowed in database file.
STR nvApacsconfNodename	1.3.6.1.4.1.230.5.50.1.3.1.2	DisplayString	read-write	For display purpose only Not used by Apacs software
INT nvApacsconfNumRec	1.3.6.1.4.1.230.5.50.1.2	INTEGER	read-only	number of records in use.
INT nvApacsconfParerrall	1.3.6.1.4.1.230.5.50.1.3.1.18	INTEGER	read-write
STR nvApacsconfReserve1	1.3.6.1.4.1.230.5.50.1.3.1.5	DisplayString	read-only	OBSOLETE - removed field.
STR nvApacsconfSitename	1.3.6.1.4.1.230.5.50.1.3.1.3	DisplayString	read-write	For display purpose only Not used by Apacs software other than in generating alarms
INT nvApacsconfStatus	1.3.6.1.4.1.230.5.50.1.3.1.19	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvApacsconfTable	1.3.6.1.4.1.230.5.50.1.3		not-accessible	Apacsconf file.
INT nvApacsconfTimerA	1.3.6.1.4.1.230.5.50.1.3.1.14	INTEGER	read-write	time in sec,for timer A Default value of 5
INT nvApacsconfTimerB	1.3.6.1.4.1.230.5.50.1.3.1.15	INTEGER	read-write	time in sec,for timer A Default value of 10
INT nvApacsconfTimerC	1.3.6.1.4.1.230.5.50.1.3.1.16	INTEGER	read-write	time in sec,for timer A Default value of 40
nvApacsstat	1.3.6.1.4.1.230.5.50.5
INT nvApacsstatActtmocip	1.3.6.1.4.1.230.5.50.5.3.1.20	INTEGER	read-only
INT nvApacsstatActtmodat	1.3.6.1.4.1.230.5.50.5.3.1.27	INTEGER	read-only
INT nvApacsstatBdhostblk	1.3.6.1.4.1.230.5.50.5.3.1.33	INTEGER	read-only
INT nvApacsstatCallrcv	1.3.6.1.4.1.230.5.50.5.3.1.11	INTEGER	read-only
INT nvApacsstatCursimul	1.3.6.1.4.1.230.5.50.5.3.1.4	INTEGER	read-only
INT nvApacsstatDleeotrcv	1.3.6.1.4.1.230.5.50.5.3.1.41	INTEGER	read-only
INT nvApacsstatDleeotsnt	1.3.6.1.4.1.230.5.50.5.3.1.40	INTEGER	read-only
INT nvApacsstatDscexcnak	1.3.6.1.4.1.230.5.50.5.3.1.31	INTEGER	read-only
INT nvApacsstatDscnoack	1.3.6.1.4.1.230.5.50.5.3.1.30	INTEGER	read-only
STR nvApacsstatDtreset	1.3.6.1.4.1.230.5.50.5.3.1.57	DisplayString	read-only	Date & Time statistics last reset.
nvApacsstatEntry	1.3.6.1.4.1.230.5.50.5.3.1		not-accessible	Apacsstat record.
INT nvApacsstatFailneg	1.3.6.1.4.1.230.5.50.5.3.1.12	INTEGER	read-only
INT nvApacsstatGdadrblks	1.3.6.1.4.1.230.5.50.5.3.1.18	INTEGER	read-only
INT nvApacsstatHostnodat	1.3.6.1.4.1.230.5.50.5.3.1.35	INTEGER	read-only
INT nvApacsstatIndex	1.3.6.1.4.1.230.5.50.5.3.1.1	INTEGER	read-only	Index
INT nvApacsstatInvadrblk	1.3.6.1.4.1.230.5.50.5.3.1.14	INTEGER	read-only
INT nvApacsstatLoscarcip	1.3.6.1.4.1.230.5.50.5.3.1.22	INTEGER	read-only
INT nvApacsstatLoscardat	1.3.6.1.4.1.230.5.50.5.3.1.29	INTEGER	read-only
INT nvApacsstatLoscarsu	1.3.6.1.4.1.230.5.50.5.3.1.17	INTEGER	read-only
INT nvApacsstatLrcerrcip	1.3.6.1.4.1.230.5.50.5.3.1.23	INTEGER	read-only
INT nvApacsstatLrcerrdat	1.3.6.1.4.1.230.5.50.5.3.1.32	INTEGER	read-only
INT nvApacsstatMaxRec	1.3.6.1.4.1.230.5.50.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvApacsstatMaxsimul	1.3.6.1.4.1.230.5.50.5.3.1.46	INTEGER	read-only
INT nvApacsstatN1200bd	1.3.6.1.4.1.230.5.50.5.3.1.48	INTEGER	read-only
INT nvApacsstatN14400bd	1.3.6.1.4.1.230.5.50.5.3.1.51	INTEGER	read-only
INT nvApacsstatN2400bd	1.3.6.1.4.1.230.5.50.5.3.1.49	INTEGER	read-only
INT nvApacsstatN28800bd	1.3.6.1.4.1.230.5.50.5.3.1.52	INTEGER	read-only
INT nvApacsstatN300bd	1.3.6.1.4.1.230.5.50.5.3.1.47	INTEGER	read-only
INT nvApacsstatN9600bd	1.3.6.1.4.1.230.5.50.5.3.1.50	INTEGER	read-only
INT nvApacsstatNidle	1.3.6.1.4.1.230.5.50.5.3.1.2	INTEGER	read-only	number of iti ports in idle state
INT nvApacsstatNoadrblk	1.3.6.1.4.1.230.5.50.5.3.1.13	INTEGER	read-only
INT nvApacsstatNonuaentr	1.3.6.1.4.1.230.5.50.5.3.1.45	INTEGER	read-only
INT nvApacsstatNonuamtch	1.3.6.1.4.1.230.5.50.5.3.1.15	INTEGER	read-only
INT nvApacsstatNumRec	1.3.6.1.4.1.230.5.50.5.2	INTEGER	read-only	number of records in use.
INT nvApacsstatNwadrblks	1.3.6.1.4.1.230.5.50.5.3.1.43	INTEGER	read-only
INT nvApacsstatNxidle	1.3.6.1.4.1.230.5.50.5.3.1.3	INTEGER	read-only
INT nvApacsstatParerrcip	1.3.6.1.4.1.230.5.50.5.3.1.55	INTEGER	read-only
INT nvApacsstatParerrdat	1.3.6.1.4.1.230.5.50.5.3.1.56	INTEGER	read-only
INT nvApacsstatParerrsu	1.3.6.1.4.1.230.5.50.5.3.1.54	INTEGER	read-only
STR nvApacsstatResetdate	1.3.6.1.4.1.230.5.50.5.3.1.5	DisplayString	read-only
INT nvApacsstatRetrnnak	1.3.6.1.4.1.230.5.50.5.3.1.38	INTEGER	read-only
INT nvApacsstatRetrntmo	1.3.6.1.4.1.230.5.50.5.3.1.37	INTEGER	read-only
INT nvApacsstatRjadrblks	1.3.6.1.4.1.230.5.50.5.3.1.44	INTEGER	read-only
INT nvApacsstatRxbytes	1.3.6.1.4.1.230.5.50.5.3.1.10	INTEGER	read-only
INT nvApacsstatRxnaks	1.3.6.1.4.1.230.5.50.5.3.1.8	INTEGER	read-only
STR nvApacsstatSimultime	1.3.6.1.4.1.230.5.50.5.3.1.53	DisplayString	read-only	When maxsimul reached.
nvApacsstatTable	1.3.6.1.4.1.230.5.50.5.3		not-accessible	Apacsstat file.
INT nvApacsstatTcalls	1.3.6.1.4.1.230.5.50.5.3.1.6	INTEGER	read-only
INT nvApacsstatTmoerrcip	1.3.6.1.4.1.230.5.50.5.3.1.24	INTEGER	read-only
INT nvApacsstatTrmdsccip	1.3.6.1.4.1.230.5.50.5.3.1.21	INTEGER	read-only
INT nvApacsstatTrmdscdat	1.3.6.1.4.1.230.5.50.5.3.1.28	INTEGER	read-only
INT nvApacsstatTrmdscsu	1.3.6.1.4.1.230.5.50.5.3.1.16	INTEGER	read-only
INT nvApacsstatTrmnoack	1.3.6.1.4.1.230.5.50.5.3.1.36	INTEGER	read-only
INT nvApacsstatTrmnodat	1.3.6.1.4.1.230.5.50.5.3.1.34	INTEGER	read-only
INT nvApacsstatTxbytes	1.3.6.1.4.1.230.5.50.5.3.1.9	INTEGER	read-only
INT nvApacsstatTxenqs	1.3.6.1.4.1.230.5.50.5.3.1.39	INTEGER	read-only
INT nvApacsstatTxnaks	1.3.6.1.4.1.230.5.50.5.3.1.7	INTEGER	read-only
INT nvApacsstatUnxhstclr	1.3.6.1.4.1.230.5.50.5.3.1.42	INTEGER	read-only
INT nvApacsstatX25clrcip	1.3.6.1.4.1.230.5.50.5.3.1.19	INTEGER	read-only
INT nvApacsstatX25clrdat	1.3.6.1.4.1.230.5.50.5.3.1.26	INTEGER	read-only
INT nvApacsstatX25conns	1.3.6.1.4.1.230.5.50.5.3.1.25	INTEGER	read-only
nvApclstat	1.3.6.1.4.1.230.5.50.10
STR nvApclstatAblock	1.3.6.1.4.1.230.5.50.10.3.1.6	DisplayString	read-only	A-block received from terminal.
STR nvApclstatCalled	1.3.6.1.4.1.230.5.50.10.3.1.5	DisplayString	read-only	Called telephone number.
STR nvApclstatCalling	1.3.6.1.4.1.230.5.50.10.3.1.4	DisplayString	read-only	Calling telephone number.
STR nvApclstatDate	1.3.6.1.4.1.230.5.50.10.3.1.2	DisplayString	read-only	Date of Call Failure.
INT nvApclstatDialind	1.3.6.1.4.1.230.5.50.10.3.1.16	INTEGER	read-only	Dial indicator from the transaction data.
STR nvApclstatDspname	1.3.6.1.4.1.230.5.50.10.3.1.20	DisplayString	read-only	DSP Port Number.
nvApclstatEntry	1.3.6.1.4.1.230.5.50.10.3.1		not-accessible	Apclstat record.
INT nvApclstatFailcause	1.3.6.1.4.1.230.5.50.10.3.1.23	INTEGER	read-only	Failure Cause.
INT nvApclstatFilter	1.3.6.1.4.1.230.5.50.10.3.1.24	INTEGER	read-only	Filter number used to produce this record.
INT nvApclstatIndex	1.3.6.1.4.1.230.5.50.10.3.1.1	INTEGER	read-only	Index of Apclstat record
INT nvApclstatIsdnclr	1.3.6.1.4.1.230.5.50.10.3.1.14	INTEGER	read-only	ISDN Clear codes.
STR nvApclstatLabel1	1.3.6.1.4.1.230.5.50.10.3.1.8	DisplayString	read-only	ANUACONF label1 used.
INT nvApclstatMaxRec	1.3.6.1.4.1.230.5.50.10.1	INTEGER	read-only	total number of records allowed in database file.
STR nvApclstatMerchid	1.3.6.1.4.1.230.5.50.10.3.1.9	DisplayString	read-only	Merchant ID from transaction.
STR nvApclstatNua	1.3.6.1.4.1.230.5.50.10.3.1.7	DisplayString	read-only	NUA to which call was connected.
INT nvApclstatNumRec	1.3.6.1.4.1.230.5.50.10.2	INTEGER	read-only	number of records in use.
INT nvApclstatPriname	1.3.6.1.4.1.230.5.50.10.3.1.21	INTEGER	read-only	PRI link number.
INT nvApclstatPstndur	1.3.6.1.4.1.230.5.50.10.3.1.18	INTEGER	read-only	PSTN duration.
INT nvApclstatRxbytes	1.3.6.1.4.1.230.5.50.10.3.1.13	INTEGER	read-only	Number of bytes received.
INT nvApclstatSpeed	1.3.6.1.4.1.230.5.50.10.3.1.11	INTEGER	read-only	Speed of modem.
nvApclstatTable	1.3.6.1.4.1.230.5.50.10.3		not-accessible	Apclstat file.
STR nvApclstatTermid	1.3.6.1.4.1.230.5.50.10.3.1.10	DisplayString	read-only	Terminal ID from transaction.
STR nvApclstatTermtype	1.3.6.1.4.1.230.5.50.10.3.1.17	DisplayString	read-only	Terminal type from the transaction data.
STR nvApclstatTime	1.3.6.1.4.1.230.5.50.10.3.1.3	DisplayString	read-only	Time of Call Failure.
INT nvApclstatTxbytes	1.3.6.1.4.1.230.5.50.10.3.1.12	INTEGER	read-only	Number of bytes sent.
STR nvApclstatWanport	1.3.6.1.4.1.230.5.50.10.3.1.22	DisplayString	read-only	X25 Port Number.
INT nvApclstatX25clr	1.3.6.1.4.1.230.5.50.10.3.1.15	INTEGER	read-only	X25 Clear codes.
INT nvApclstatX25dur	1.3.6.1.4.1.230.5.50.10.3.1.19	INTEGER	read-only	X25 duration.
INT nvApddmstatNumRec	1.3.6.1.4.1.230.5.50.4.2	INTEGER	read-only	number of records in use.
nvApfclstat	1.3.6.1.4.1.230.5.50.9
STR nvApfclstatAblock	1.3.6.1.4.1.230.5.50.9.3.1.6	DisplayString	read-only	A-block received from terminal.
STR nvApfclstatCalled	1.3.6.1.4.1.230.5.50.9.3.1.5	DisplayString	read-only	Called telephone number.
STR nvApfclstatCalling	1.3.6.1.4.1.230.5.50.9.3.1.4	DisplayString	read-only	Calling telephone number.
STR nvApfclstatDate	1.3.6.1.4.1.230.5.50.9.3.1.2	DisplayString	read-only	Date of Call Failure.
INT nvApfclstatDialind	1.3.6.1.4.1.230.5.50.9.3.1.16	INTEGER	read-only	Dial indicator from the transaction data.
STR nvApfclstatDspname	1.3.6.1.4.1.230.5.50.9.3.1.20	DisplayString	read-only	DSP Port Number.
nvApfclstatEntry	1.3.6.1.4.1.230.5.50.9.3.1		not-accessible	Apfclstat record.
INT nvApfclstatFailcause	1.3.6.1.4.1.230.5.50.9.3.1.23	INTEGER	read-only	Failure Cause.
INT nvApfclstatFilter	1.3.6.1.4.1.230.5.50.9.3.1.24	INTEGER	read-only	Filter number - not used in this file.
INT nvApfclstatIndex	1.3.6.1.4.1.230.5.50.9.3.1.1	INTEGER	read-only	Index of Apfclstat record
INT nvApfclstatIsdnclr	1.3.6.1.4.1.230.5.50.9.3.1.14	INTEGER	read-only	ISDN Clear codes.
STR nvApfclstatLabel1	1.3.6.1.4.1.230.5.50.9.3.1.8	DisplayString	read-only	ANUACONF label1 used.
INT nvApfclstatMaxRec	1.3.6.1.4.1.230.5.50.9.1	INTEGER	read-only	total number of records allowed in database file.
STR nvApfclstatMerchid	1.3.6.1.4.1.230.5.50.9.3.1.9	DisplayString	read-only	Merchant ID from transaction.
STR nvApfclstatNua	1.3.6.1.4.1.230.5.50.9.3.1.7	DisplayString	read-only	NUA to which call was connected.
INT nvApfclstatNumRec	1.3.6.1.4.1.230.5.50.9.2	INTEGER	read-only	number of records in use.
INT nvApfclstatPriname	1.3.6.1.4.1.230.5.50.9.3.1.21	INTEGER	read-only	PRI link number.
INT nvApfclstatPstndur	1.3.6.1.4.1.230.5.50.9.3.1.18	INTEGER	read-only	PSTN duration.
INT nvApfclstatRxbytes	1.3.6.1.4.1.230.5.50.9.3.1.13	INTEGER	read-only	Number of bytes received.
INT nvApfclstatSpeed	1.3.6.1.4.1.230.5.50.9.3.1.11	INTEGER	read-only	Speed of modem.
nvApfclstatTable	1.3.6.1.4.1.230.5.50.9.3		not-accessible	Apfclstat file.
STR nvApfclstatTermid	1.3.6.1.4.1.230.5.50.9.3.1.10	DisplayString	read-only	Terminal ID from transaction.
STR nvApfclstatTermtype	1.3.6.1.4.1.230.5.50.9.3.1.17	DisplayString	read-only	Terminal type from the transaction data.
STR nvApfclstatTime	1.3.6.1.4.1.230.5.50.9.3.1.3	DisplayString	read-only	Time of Call Failure.
INT nvApfclstatTxbytes	1.3.6.1.4.1.230.5.50.9.3.1.12	INTEGER	read-only	Number of bytes sent.
STR nvApfclstatWanport	1.3.6.1.4.1.230.5.50.9.3.1.22	DisplayString	read-only	X25 Port Number.
INT nvApfclstatX25clr	1.3.6.1.4.1.230.5.50.9.3.1.15	INTEGER	read-only	X25 Clear codes.
INT nvApfclstatX25dur	1.3.6.1.4.1.230.5.50.9.3.1.19	INTEGER	read-only	X25 duration.
nvApfilter	1.3.6.1.4.1.230.5.50.8
STR nvApfilterAblock	1.3.6.1.4.1.230.5.50.8.3.1.4	DisplayString	read-write	A Block.
STR nvApfilterCalled	1.3.6.1.4.1.230.5.50.8.3.1.2	DisplayString	read-write	Called Telephone Number.
STR nvApfilterCalling	1.3.6.1.4.1.230.5.50.8.3.1.3	DisplayString	read-write	Calling Telephone Number.
nvApfilterEntry	1.3.6.1.4.1.230.5.50.8.3.1		not-accessible	Apfilter record.
INT nvApfilterFailcause	1.3.6.1.4.1.230.5.50.8.3.1.8	INTEGER	read-write	Failure Cause.
INT nvApfilterIndex	1.3.6.1.4.1.230.5.50.8.3.1.1	INTEGER	read-only	Index of Apfilter record
STR nvApfilterLabel1	1.3.6.1.4.1.230.5.50.8.3.1.5	DisplayString	read-write	ANUACONF Label 1.
INT nvApfilterMaxRec	1.3.6.1.4.1.230.5.50.8.1	INTEGER	read-only	total number of records allowed in database file.
STR nvApfilterMerchid	1.3.6.1.4.1.230.5.50.8.3.1.6	DisplayString	read-write	Merchant ID.
INT nvApfilterNumRec	1.3.6.1.4.1.230.5.50.8.2	INTEGER	read-only	number of records in use.
INT nvApfilterStatus	1.3.6.1.4.1.230.5.50.8.3.1.15	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvApfilterTable	1.3.6.1.4.1.230.5.50.8.3		not-accessible	Apfilter file.
STR nvApfilterTermid	1.3.6.1.4.1.230.5.50.8.3.1.7	DisplayString	read-write	Terminal ID.
INT nvApfilterThreshold	1.3.6.1.4.1.230.5.50.8.3.1.9	INTEGER	read-write	Number of records per minute for this filter.
nvApmdmstat	1.3.6.1.4.1.230.5.50.4
INT nvApmdmstatB1calls	1.3.6.1.4.1.230.5.50.4.3.1.13	INTEGER	read-only	Number of calls greater than call duration timer b1
INT nvApmdmstatB2calls	1.3.6.1.4.1.230.5.50.4.3.1.14	INTEGER	read-only	Number of calls greater than call duration timer b2
INT nvApmdmstatB3calls	1.3.6.1.4.1.230.5.50.4.3.1.15	INTEGER	read-only	Number of calls greater than call duration timer b3
INT nvApmdmstatB4calls	1.3.6.1.4.1.230.5.50.4.3.1.16	INTEGER	read-only	Number of calls greater than call duration timer b4
INT nvApmdmstatB5calls	1.3.6.1.4.1.230.5.50.4.3.1.17	INTEGER	read-only	Number of calls greater than call duration timer b5
INT nvApmdmstatB6calls	1.3.6.1.4.1.230.5.50.4.3.1.18	INTEGER	read-only	Number of calls greater than call duration timer b6
INT nvApmdmstatB7calls	1.3.6.1.4.1.230.5.50.4.3.1.19	INTEGER	read-only	Number of calls greater than call duration timer b7
STR nvApmdmstatDtreset	1.3.6.1.4.1.230.5.50.4.3.1.20	DisplayString	read-only	date & time statistics last reset
nvApmdmstatEntry	1.3.6.1.4.1.230.5.50.4.3.1		not-accessible	Apmdmstat record.
INT nvApmdmstatFlsess	1.3.6.1.4.1.230.5.50.4.3.1.8	INTEGER	read-only	Number with no A-block
INT nvApmdmstatFltrain	1.3.6.1.4.1.230.5.50.4.3.1.7	INTEGER	read-only	Number of calls that failed to train
INT nvApmdmstatHostclr	1.3.6.1.4.1.230.5.50.4.3.1.5	INTEGER	read-only	Number of calls cleared by the Host
INT nvApmdmstatIndex	1.3.6.1.4.1.230.5.50.4.3.1.1	INTEGER	read-only	Index -- db record
INT nvApmdmstatMaxRec	1.3.6.1.4.1.230.5.50.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvApmdmstatNwclr	1.3.6.1.4.1.230.5.50.4.3.1.6	INTEGER	read-only	Number of calls cleared by the network
INT nvApmdmstatRxbytes	1.3.6.1.4.1.230.5.50.4.3.1.12	INTEGER	read-only	Number of x.25 bytes of data rx
INT nvApmdmstatRxpkt	1.3.6.1.4.1.230.5.50.4.3.1.10	INTEGER	read-only	Number of x.25 packet Rx
INT nvApmdmstatSpeed	1.3.6.1.4.1.230.5.50.4.3.1.2	INTEGER	read-only	Modem speed
INT nvApmdmstatSuccess	1.3.6.1.4.1.230.5.50.4.3.1.4	INTEGER	read-only	Number of successful connections
nvApmdmstatTable	1.3.6.1.4.1.230.5.50.4.3		not-accessible	Apmdmstat file.
INT nvApmdmstatTbcalls	1.3.6.1.4.1.230.5.50.4.3.1.3	INTEGER	read-only	Total Number of calls at this speed
INT nvApmdmstatTxbytes	1.3.6.1.4.1.230.5.50.4.3.1.11	INTEGER	read-only	Number of x.25 bytes of data Tx
INT nvApmdmstatTxpkt	1.3.6.1.4.1.230.5.50.4.3.1.9	INTEGER	read-only	Number of x.25 packet Tx
nvBillconf	1.3.6.1.4.1.230.5.50.6
nvBillconf1Entry	1.3.6.1.4.1.230.5.50.6.3.1		not-accessible	Billconf record.
INT nvBillconf1Index	1.3.6.1.4.1.230.5.50.6.3.1.1	INTEGER	read-only	Index of Billconf record
nvBillconf1Table	1.3.6.1.4.1.230.5.50.6.3		not-accessible	Billconf file.
nvBillconf2Entry	1.3.6.1.4.1.230.5.50.6.4.1		not-accessible	Billconf record.
INT nvBillconf2Index	1.3.6.1.4.1.230.5.50.6.4.1.1	INTEGER	read-only	Index of Billconf record
nvBillconf2Table	1.3.6.1.4.1.230.5.50.6.4		not-accessible	Billconf file.
INT nvBillconfEnable	1.3.6.1.4.1.230.5.50.6.3.1.2	INTEGER	read-write	Enable/Disable billstat accounting.
INT nvBillconfMaxRec	1.3.6.1.4.1.230.5.50.6.1	INTEGER	read-only	total number of records allowed in database file.
INT nvBillconfNumRec	1.3.6.1.4.1.230.5.50.6.2	INTEGER	read-only	number of records in use.
INT nvBillconfSegsize	1.3.6.1.4.1.230.5.50.6.3.1.3	INTEGER	read-write	Segment size.
INT nvBillconfSet1	1.3.6.1.4.1.230.5.50.6.3.1.4	INTEGER	read-write
INT nvBillconfSet10	1.3.6.1.4.1.230.5.50.6.4.1.14	INTEGER	read-write
STR nvBillconfSet10nua1	1.3.6.1.4.1.230.5.50.6.4.1.15	DisplayString	read-write
STR nvBillconfSet10nua2	1.3.6.1.4.1.230.5.50.6.4.1.16	DisplayString	read-write
STR nvBillconfSet10nua3	1.3.6.1.4.1.230.5.50.6.4.1.17	DisplayString	read-write
INT nvBillconfSet11	1.3.6.1.4.1.230.5.50.6.4.1.18	INTEGER	read-write
STR nvBillconfSet11nua1	1.3.6.1.4.1.230.5.50.6.4.1.19	DisplayString	read-write
STR nvBillconfSet11nua2	1.3.6.1.4.1.230.5.50.6.4.1.20	DisplayString	read-write
STR nvBillconfSet11nua3	1.3.6.1.4.1.230.5.50.6.4.1.21	DisplayString	read-write
INT nvBillconfSet12	1.3.6.1.4.1.230.5.50.6.4.1.22	INTEGER	read-write
STR nvBillconfSet12nua1	1.3.6.1.4.1.230.5.50.6.4.1.23	DisplayString	read-write
STR nvBillconfSet12nua2	1.3.6.1.4.1.230.5.50.6.4.1.24	DisplayString	read-write
STR nvBillconfSet12nua3	1.3.6.1.4.1.230.5.50.6.4.1.25	DisplayString	read-write
STR nvBillconfSet1nua1	1.3.6.1.4.1.230.5.50.6.3.1.5	DisplayString	read-write
STR nvBillconfSet1nua2	1.3.6.1.4.1.230.5.50.6.3.1.6	DisplayString	read-write
STR nvBillconfSet1nua3	1.3.6.1.4.1.230.5.50.6.3.1.7	DisplayString	read-write
INT nvBillconfSet2	1.3.6.1.4.1.230.5.50.6.3.1.8	INTEGER	read-write
STR nvBillconfSet2nua1	1.3.6.1.4.1.230.5.50.6.3.1.9	DisplayString	read-write
STR nvBillconfSet2nua2	1.3.6.1.4.1.230.5.50.6.3.1.10	DisplayString	read-write
STR nvBillconfSet2nua3	1.3.6.1.4.1.230.5.50.6.3.1.11	DisplayString	read-write
INT nvBillconfSet3	1.3.6.1.4.1.230.5.50.6.3.1.12	INTEGER	read-write
STR nvBillconfSet3nua1	1.3.6.1.4.1.230.5.50.6.3.1.13	DisplayString	read-write
STR nvBillconfSet3nua2	1.3.6.1.4.1.230.5.50.6.3.1.14	DisplayString	read-write
STR nvBillconfSet3nua3	1.3.6.1.4.1.230.5.50.6.3.1.15	DisplayString	read-write
INT nvBillconfSet4	1.3.6.1.4.1.230.5.50.6.3.1.16	INTEGER	read-write
STR nvBillconfSet4nua1	1.3.6.1.4.1.230.5.50.6.3.1.17	DisplayString	read-write
STR nvBillconfSet4nua2	1.3.6.1.4.1.230.5.50.6.3.1.18	DisplayString	read-write
STR nvBillconfSet4nua3	1.3.6.1.4.1.230.5.50.6.3.1.19	DisplayString	read-write
INT nvBillconfSet5	1.3.6.1.4.1.230.5.50.6.3.1.20	INTEGER	read-write
STR nvBillconfSet5nua1	1.3.6.1.4.1.230.5.50.6.3.1.21	DisplayString	read-write
STR nvBillconfSet5nua2	1.3.6.1.4.1.230.5.50.6.3.1.22	DisplayString	read-write
STR nvBillconfSet5nua3	1.3.6.1.4.1.230.5.50.6.3.1.23	DisplayString	read-write
INT nvBillconfSet6	1.3.6.1.4.1.230.5.50.6.3.1.24	INTEGER	read-write
STR nvBillconfSet6nua1	1.3.6.1.4.1.230.5.50.6.3.1.25	DisplayString	read-write
STR nvBillconfSet6nua2	1.3.6.1.4.1.230.5.50.6.3.1.26	DisplayString	read-write
STR nvBillconfSet6nua3	1.3.6.1.4.1.230.5.50.6.3.1.27	DisplayString	read-write
INT nvBillconfSet7	1.3.6.1.4.1.230.5.50.6.4.1.2	INTEGER	read-write
STR nvBillconfSet7nua1	1.3.6.1.4.1.230.5.50.6.4.1.3	DisplayString	read-write
STR nvBillconfSet7nua2	1.3.6.1.4.1.230.5.50.6.4.1.4	DisplayString	read-write
STR nvBillconfSet7nua3	1.3.6.1.4.1.230.5.50.6.4.1.5	DisplayString	read-write
INT nvBillconfSet8	1.3.6.1.4.1.230.5.50.6.4.1.6	INTEGER	read-write
STR nvBillconfSet8nua1	1.3.6.1.4.1.230.5.50.6.4.1.7	DisplayString	read-write
STR nvBillconfSet8nua2	1.3.6.1.4.1.230.5.50.6.4.1.8	DisplayString	read-write
STR nvBillconfSet8nua3	1.3.6.1.4.1.230.5.50.6.4.1.9	DisplayString	read-write
INT nvBillconfSet9	1.3.6.1.4.1.230.5.50.6.4.1.10	INTEGER	read-write
STR nvBillconfSet9nua1	1.3.6.1.4.1.230.5.50.6.4.1.11	DisplayString	read-write
STR nvBillconfSet9nua2	1.3.6.1.4.1.230.5.50.6.4.1.12	DisplayString	read-write
STR nvBillconfSet9nua3	1.3.6.1.4.1.230.5.50.6.4.1.13	DisplayString	read-write
nvBillstat	1.3.6.1.4.1.230.5.50.7
INT nvBillstat10to15	1.3.6.1.4.1.230.5.50.7.3.1.20	INTEGER	read-only
INT nvBillstat15to20	1.3.6.1.4.1.230.5.50.7.3.1.21	INTEGER	read-only
INT nvBillstat5to10	1.3.6.1.4.1.230.5.50.7.3.1.19	INTEGER	read-only
INT nvBillstatClosed	1.3.6.1.4.1.230.5.50.7.3.1.23	INTEGER	read-only	Record closed or open.
STR nvBillstatDate	1.3.6.1.4.1.230.5.50.7.3.1.3	DisplayString	read-only
nvBillstatEntry	1.3.6.1.4.1.230.5.50.7.3.1		not-accessible	Billstat record.
INT nvBillstatGrtr20	1.3.6.1.4.1.230.5.50.7.3.1.22	INTEGER	read-only
INT nvBillstatHostclr	1.3.6.1.4.1.230.5.50.7.3.1.14	INTEGER	read-only
INT nvBillstatIndex	1.3.6.1.4.1.230.5.50.7.3.1.1	INTEGER	read-only	Index
INT nvBillstatLess5	1.3.6.1.4.1.230.5.50.7.3.1.18	INTEGER	read-only
INT nvBillstatMaxRec	1.3.6.1.4.1.230.5.50.7.1	INTEGER	read-only	total number of records allowed in database file.
INT nvBillstatN1200bps	1.3.6.1.4.1.230.5.50.7.3.1.8	INTEGER	read-only
INT nvBillstatN2400bps	1.3.6.1.4.1.230.5.50.7.3.1.9	INTEGER	read-only
INT nvBillstatN300bps	1.3.6.1.4.1.230.5.50.7.3.1.7	INTEGER	read-only
INT nvBillstatNetclr	1.3.6.1.4.1.230.5.50.7.3.1.15	INTEGER	read-only
INT nvBillstatNgrtr2400	1.3.6.1.4.1.230.5.50.7.3.1.10	INTEGER	read-only
INT nvBillstatNodeid	1.3.6.1.4.1.230.5.50.7.3.1.2	INTEGER	read-only
INT nvBillstatNuaset	1.3.6.1.4.1.230.5.50.7.3.1.5	INTEGER	read-only
INT nvBillstatNumRec	1.3.6.1.4.1.230.5.50.7.2	INTEGER	read-only	number of records in use.
INT nvBillstatRxcallc	1.3.6.1.4.1.230.5.50.7.3.1.13	INTEGER	read-only
INT nvBillstatRxpak	1.3.6.1.4.1.230.5.50.7.3.1.17	INTEGER	read-only
INT nvBillstatRxseg	1.3.6.1.4.1.230.5.50.7.3.1.12	INTEGER	read-only
nvBillstatTable	1.3.6.1.4.1.230.5.50.7.3		not-accessible	Billstat file.
STR nvBillstatTime	1.3.6.1.4.1.230.5.50.7.3.1.4	DisplayString	read-only
INT nvBillstatTxpak	1.3.6.1.4.1.230.5.50.7.3.1.16	INTEGER	read-only
INT nvBillstatTxseg	1.3.6.1.4.1.230.5.50.7.3.1.11	INTEGER	read-only
INT nvCDLIAtten	1.3.6.1.4.1.230.5.1.18.1.11	INTEGER	read-write	Attenuation of the line .
INT nvCDLICode	1.3.6.1.4.1.230.5.1.18.1.5	INTEGER	read-write	Code format.
INT nvCDLICsudsu	1.3.6.1.4.1.230.5.1.18.1.10	INTEGER	read-write	csudsu enabled or not.
INT nvCDLIDataInver	1.3.6.1.4.1.230.5.1.18.1.13	INTEGER	read-write	Data inversion enabled or not.
INT nvCDLIEnable	1.3.6.1.4.1.230.5.1.18.1.9	INTEGER	read-write	Port enable.
nvCDLIEntry	1.3.6.1.4.1.230.5.1.18.1		not-accessible	DLI configuration record.
INT nvCDLIFdl	1.3.6.1.4.1.230.5.1.18.1.6	INTEGER	read-write	Facilities data link format.
INT nvCDLIFormat	1.3.6.1.4.1.230.5.1.18.1.4	INTEGER	read-write	Frame format.
INT nvCDLIGain	1.3.6.1.4.1.230.5.1.18.1.12	INTEGER	read-write	Gain of the receiver.
INT nvCDLILineimp	1.3.6.1.4.1.230.5.1.18.1.8	INTEGER	read-write	Line impedance.
STR nvCDLIName	1.3.6.1.4.1.230.5.1.18.1.3	DisplayString	read-only	The name of the DLI card port such as CDLI1_I2.
INT nvCDLIPortIndex	1.3.6.1.4.1.230.5.1.18.1.2	INTEGER	read-only	CDLI card port index number.
INT nvCDLISignaling	1.3.6.1.4.1.230.5.1.18.1.7	INTEGER	read-write	Signal type.
INT nvCDLISlotIndex	1.3.6.1.4.1.230.5.1.18.1.1	INTEGER	read-only	CDLI slot index number.
nvCDLITable	1.3.6.1.4.1.230.5.1.18		not-accessible	DLI configuration table definition.The actual database contains 17 tables, if a DLI card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port.
INT nvCDSPEnable	1.3.6.1.4.1.230.5.1.26.1.8	INTEGER	read-write	CDSP port enable control.
nvCDSPEntry	1.3.6.1.4.1.230.5.1.26.1		not-accessible	DLI configuration record.
STR nvCDSPName	1.3.6.1.4.1.230.5.1.26.1.3	DisplayString	read-only	CDSP port name.
INT nvCDSPNumfaicon	1.3.6.1.4.1.230.5.1.26.1.9	INTEGER	read-write	CDSP num of consecutive hand shakes failed.
INT nvCDSPNumload	1.3.6.1.4.1.230.5.1.26.1.10	INTEGER	read-write	CDSP num of times redownload failed.
INT nvCDSPPortIndex	1.3.6.1.4.1.230.5.1.26.1.2	INTEGER	read-only	CDSP port number.
INT nvCDSPSlotIndex	1.3.6.1.4.1.230.5.1.26.1.1	INTEGER	read-only	CDSP slot number.
nvCDSPTable	1.3.6.1.4.1.230.5.1.26		not-accessible	DSP configuration table definition.The actual database contains 17 tables, if a DSP card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port.
INT nvCFRMRClkmode	1.3.6.1.4.1.230.5.1.23.1.13	INTEGER	read-write	Port clock mode.
INT nvCFRMRDebounce	1.3.6.1.4.1.230.5.1.23.1.16	INTEGER	read-write	WAN port eia debounce interval.
INT nvCFRMREIAtype	1.3.6.1.4.1.230.5.1.23.1.10	INTEGER	read-write	Port interface type.
INT nvCFRMREnable	1.3.6.1.4.1.230.5.1.23.1.19	INTEGER	read-write	Enable or disable port.
nvCFRMREntry	1.3.6.1.4.1.230.5.1.23.1		not-accessible	Framer card configuration record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active.
STR nvCFRMRName	1.3.6.1.4.1.230.5.1.23.1.3	DisplayString	read-only	The name of a framer card port.
INT nvCFRMRPortIndex	1.3.6.1.4.1.230.5.1.23.1.2	INTEGER	read-only	For static port, the index number is from 1 to 2. For smart port type, the index number is from 3 to 130.
INT nvCFRMRRate	1.3.6.1.4.1.230.5.1.23.1.7	INTEGER	read-write	Framer card port baud rate.
INT nvCFRMRSlotIndex	1.3.6.1.4.1.230.5.1.23.1.1	INTEGER	read-only	Framer card slot number.
nvCFRMRTable	1.3.6.1.4.1.230.5.1.23		not-accessible	Framer card configuration table definition. The actual framer card database has 17 tables. Each table uses name convention: CFRMR plus slot number. Each framer card has two static WAN ports and 128 smart ports. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires two instances: slot and port number.
nvCrcstat	1.3.6.1.4.1.230.5.1.29
INT nvCrcstatBw	1.3.6.1.4.1.230.5.1.29.3.1.5	INTEGER	read-only	bandwidth of permanent circuit.
STR nvCrcstatCallednum	1.3.6.1.4.1.230.5.1.29.3.1.4	DisplayString	read-only	called party address.
STR nvCrcstatCalledsub	1.3.6.1.4.1.230.5.1.29.3.1.15	DisplayString	read-only	called party subaddress.
STR nvCrcstatCallngnum	1.3.6.1.4.1.230.5.1.29.3.1.14	DisplayString	read-only	calling party address.
STR nvCrcstatCallngsub	1.3.6.1.4.1.230.5.1.29.3.1.16	DisplayString	read-only	calling party subaddress.
INT nvCrcstatCid	1.3.6.1.4.1.230.5.1.29.3.1.2	INTEGER	read-only	circuit connection identifier.
INT nvCrcstatCroute	1.3.6.1.4.1.230.5.1.29.3.1.19	INTEGER	read-only	Croute record id used.
STR nvCrcstatDevice0	1.3.6.1.4.1.230.5.1.29.3.1.7	DisplayString	read-only	device info 0.
STR nvCrcstatDevice1	1.3.6.1.4.1.230.5.1.29.3.1.9	DisplayString	read-only	device info 1.
STR nvCrcstatDevice2	1.3.6.1.4.1.230.5.1.29.3.1.11	DisplayString	read-only	device info 2.
INT nvCrcstatDirection	1.3.6.1.4.1.230.5.1.29.3.1.21	INTEGER	read-only	Direction call was in.
nvCrcstatEntry	1.3.6.1.4.1.230.5.1.29.3.1		not-accessible	crcstat record indexed by record number.
INT nvCrcstatIndex	1.3.6.1.4.1.230.5.1.29.3.1.1	INTEGER	read-only	Index of crcstat record.
INT nvCrcstatL1mode	1.3.6.1.4.1.230.5.1.29.3.1.18	INTEGER	read-only	Layer 1 data mode.
INT nvCrcstatL1prot	1.3.6.1.4.1.230.5.1.29.3.1.17	INTEGER	read-only	L1prot.
INT nvCrcstatMaxRec	1.3.6.1.4.1.230.5.1.29.1	INTEGER	read-only	total number of records allowed in database file.
INT nvCrcstatNumRec	1.3.6.1.4.1.230.5.1.29.2	INTEGER	read-only	number of records in use.
STR nvCrcstatRcsc0	1.3.6.1.4.1.230.5.1.29.3.1.6	DisplayString	read-only	resource info 0.
STR nvCrcstatRcsc1	1.3.6.1.4.1.230.5.1.29.3.1.8	DisplayString	read-only	resource info 1.
STR nvCrcstatRcsc2	1.3.6.1.4.1.230.5.1.29.3.1.10	DisplayString	read-only	resource info 2.
STR nvCrcstatReserve1	1.3.6.1.4.1.230.5.1.29.3.1.12	DisplayString	read-only	OBSOLETE - removed field.
STR nvCrcstatReserve2	1.3.6.1.4.1.230.5.1.29.3.1.13	DisplayString	read-only	OBSOLETE - removed field.
INT nvCrcstatRouting	1.3.6.1.4.1.230.5.1.29.3.1.20	INTEGER	read-only	Routing method.
INT nvCrcstatState	1.3.6.1.4.1.230.5.1.29.3.1.3	INTEGER	read-only	circuit connection state.
nvCrcstatTable	1.3.6.1.4.1.230.5.1.29.3		not-accessible	Circuit connection status table.
nvCrfstat	1.3.6.1.4.1.230.5.1.30
STR nvCrfstatAddr	1.3.6.1.4.1.230.5.1.30.3.1.11	DisplayString	read-only	address.
STR nvCrfstatCallednum	1.3.6.1.4.1.230.5.1.30.3.1.3	DisplayString	read-only	called party address.
STR nvCrfstatCalledsub	1.3.6.1.4.1.230.5.1.30.3.1.5	DisplayString	read-only	called party subaddress.
STR nvCrfstatCallngnum	1.3.6.1.4.1.230.5.1.30.3.1.4	DisplayString	read-only	calling party address.
STR nvCrfstatCallngsub	1.3.6.1.4.1.230.5.1.30.3.1.6	DisplayString	read-only	calling party subaddress.
INT nvCrfstatCause	1.3.6.1.4.1.230.5.1.30.3.1.12	INTEGER	read-only	circuit connection failure cause.
INT nvCrfstatCid	1.3.6.1.4.1.230.5.1.30.3.1.2	INTEGER	read-only	circuit connection identifier.
INT nvCrfstatCroute	1.3.6.1.4.1.230.5.1.30.3.1.9	INTEGER	read-only	Croute record id used.
INT nvCrfstatDirection	1.3.6.1.4.1.230.5.1.30.3.1.18	INTEGER	read-only	Direction record is for.
nvCrfstatEntry	1.3.6.1.4.1.230.5.1.30.3.1		not-accessible	crfstat record indexed by record number.
INT nvCrfstatIndex	1.3.6.1.4.1.230.5.1.30.3.1.1	INTEGER	read-only	Index of crfstat record.
INT nvCrfstatL1mode	1.3.6.1.4.1.230.5.1.30.3.1.8	INTEGER	read-only	Layer 1 data mode.
INT nvCrfstatL1prot	1.3.6.1.4.1.230.5.1.30.3.1.7	INTEGER	read-only	L1prot.
INT nvCrfstatMaxRec	1.3.6.1.4.1.230.5.1.30.1	INTEGER	read-only	total number of records allowed in database file.
INT nvCrfstatNumRec	1.3.6.1.4.1.230.5.1.30.2	INTEGER	read-only	number of records in use.
STR nvCrfstatRcsc0	1.3.6.1.4.1.230.5.1.30.3.1.13	DisplayString	read-only	resource info 0.
STR nvCrfstatRcsc1	1.3.6.1.4.1.230.5.1.30.3.1.14	DisplayString	read-only	resource info 1.
STR nvCrfstatRcsc2	1.3.6.1.4.1.230.5.1.30.3.1.15	DisplayString	read-only	resource info 2.
STR nvCrfstatReserve1	1.3.6.1.4.1.230.5.1.30.3.1.16	DisplayString	read-only	OBSOLETE - removed field.
INT nvCrfstatRouting	1.3.6.1.4.1.230.5.1.30.3.1.10	INTEGER	read-only	Routing method.
nvCrfstatTable	1.3.6.1.4.1.230.5.1.30.3		not-accessible	Circuit failure status table.
nvCroute	1.3.6.1.4.1.230.5.1.28
STR nvCrouteAddr	1.3.6.1.4.1.230.5.1.28.3.1.10	DisplayString	read-write	Address.
INT nvCrouteBw	1.3.6.1.4.1.230.5.1.28.3.1.19	INTEGER	read-write
INT nvCrouteChoice	1.3.6.1.4.1.230.5.1.28.3.1.30	INTEGER	read-write	A priority value. Used to specify which record gets precedence if two records have the same addr.
INT nvCrouteDialmapid	1.3.6.1.4.1.230.5.1.28.3.1.27	INTEGER	read-write	Record id of dialmap record to use.
INT nvCrouteDirection	1.3.6.1.4.1.230.5.1.28.3.1.29	INTEGER	read-write	Direction record is for.
nvCrouteEntry	1.3.6.1.4.1.230.5.1.28.3.1		not-accessible	Circuit routing table record.
INT nvCrouteIndex	1.3.6.1.4.1.230.5.1.28.3.1.1	INTEGER	read-only	Index of croute record.
INT nvCrouteMaxRec	1.3.6.1.4.1.230.5.1.28.1	INTEGER	read-only	total number of records allowed in database file.
INT nvCrouteNumRec	1.3.6.1.4.1.230.5.1.28.2	INTEGER	read-only	number of records in use.
STR nvCrouteRcscp1	1.3.6.1.4.1.230.5.1.28.3.1.22	DisplayString	read-write	rcscp1.
STR nvCrouteRcscp2	1.3.6.1.4.1.230.5.1.28.3.1.25	DisplayString	read-write	rcscp1.
STR nvCrouteReserve1	1.3.6.1.4.1.230.5.1.28.3.1.28	DisplayString	read-only	OBSOLETE - removed field.
INT nvCrouteRouting	1.3.6.1.4.1.230.5.1.28.3.1.11	INTEGER	read-write	routing new var.
INT nvCrouteStatus	1.3.6.1.4.1.230.5.1.28.3.1.31	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvCrouteTable	1.3.6.1.4.1.230.5.1.28.3		not-accessible	Circuit routing table.
INT nvCrouteType	1.3.6.1.4.1.230.5.1.28.3.1.13	INTEGER	read-write	circuit type.
INT nvCrouteVol1mode	1.3.6.1.4.1.230.5.1.28.3.1.17	INTEGER	read-write	Data mode.
INT nvCrouteVol1prot	1.3.6.1.4.1.230.5.1.28.3.1.15	INTEGER	read-write	Protocol Specified.
STR nvDate	1.3.6.1.4.1.230.5.65.3	DisplayString	read-write	Set Nevada date/time. The Format is as follows yyyy mm dd hh mm ss
nvDialmap	1.3.6.1.4.1.230.5.1.34
STR nvDialmapAddprefix	1.3.6.1.4.1.230.5.1.34.3.1.3	DisplayString	read-write	Digits to add after digits deleted.
nvDialmapEntry	1.3.6.1.4.1.230.5.1.34.3.1		not-accessible	Dialmap table record.
INT nvDialmapIndex	1.3.6.1.4.1.230.5.1.34.3.1.1	INTEGER	read-only	Index of dialmap record.
INT nvDialmapMaxRec	1.3.6.1.4.1.230.5.1.34.1	INTEGER	read-only	total number of records allowed in database file.
INT nvDialmapNumdelete	1.3.6.1.4.1.230.5.1.34.3.1.2	INTEGER	read-write	Number of digits to delete.
INT nvDialmapNumRec	1.3.6.1.4.1.230.5.1.34.2	INTEGER	read-only	number of records in use.
INT nvDialmapStatus	1.3.6.1.4.1.230.5.1.34.3.1.10	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvDialmapTable	1.3.6.1.4.1.230.5.1.34.3		not-accessible	Dialmap table.
nvDialstat	1.3.6.1.4.1.230.5.1.36
INT nvDialstatAdFailtim	1.3.6.1.4.1.230.5.1.36.3.1.28	INTEGER	read-only	Average time for dial-out for filaed cases, in units of tenths of a second.
INT nvDialstatAdSucctim	1.3.6.1.4.1.230.5.1.36.3.1.27	INTEGER	read-only	Average time for dial-out for successful dial-out request, in units of tenths of a second.
nvDialstatEntry	1.3.6.1.4.1.230.5.1.36.3.1		not-accessible	Dialstat table record.
INT nvDialstatIndex	1.3.6.1.4.1.230.5.1.36.3.1.1	INTEGER	read-only	Index of Dialstat record
STR nvDialstatLastAddr	1.3.6.1.4.1.230.5.1.36.3.1.6	DisplayString	read-only	Last Called Number.
INT nvDialstatLastCause	1.3.6.1.4.1.230.5.1.36.3.1.7	INTEGER	read-only	Last ISDN cause code.
INT nvDialstatLastDiag	1.3.6.1.4.1.230.5.1.36.3.1.8	INTEGER	read-only	Last X.25 diagnostic.
STR nvDialstatLastResponse	1.3.6.1.4.1.230.5.1.36.3.1.9	DisplayString	read-only	Last Response.
CTR nvDialstatMaxcall	1.3.6.1.4.1.230.5.1.36.3.1.26	Counter	read-only	Maximum number concurrently calling.
INT nvDialstatMaxRec	1.3.6.1.4.1.230.5.1.36.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvDialstatNabredial	1.3.6.1.4.1.230.5.1.36.3.1.29	Counter	read-only	number of aborted redials, JATE redial restriction.
CTR nvDialstatNattempt	1.3.6.1.4.1.230.5.1.36.3.1.11	Counter	read-only	Number of call attempts. (May be multiple attempts per dialout request).
CTR nvDialstatNbusy	1.3.6.1.4.1.230.5.1.36.3.1.17	Counter	read-only	Number of fails due to remote busy.
INT nvDialstatNcalling	1.3.6.1.4.1.230.5.1.36.3.1.4	INTEGER	read-only	Number of call attempts currently occuring.
CTR nvDialstatNcircfail	1.3.6.1.4.1.230.5.1.36.3.1.14	Counter	read-only	Number of times circuit creation failed immediately.
CTR nvDialstatNcmderror	1.3.6.1.4.1.230.5.1.36.3.1.15	Counter	read-only	Number of fails due to error in dialout string command.
CTR nvDialstatNconnfail	1.3.6.1.4.1.230.5.1.36.3.1.24	Counter	read-only	Number of fails after ISDN connection for reasons other than modem negotiation failure.
INT nvDialstatNcurrent	1.3.6.1.4.1.230.5.1.36.3.1.3	INTEGER	read-only	Number of dial-out Sessions currently occuring.
CTR nvDialstatNdialout	1.3.6.1.4.1.230.5.1.36.3.1.10	Counter	read-only	Number of dial-out sessions.
CTR nvDialstatNdialtone	1.3.6.1.4.1.230.5.1.36.3.1.16	Counter	read-only	Number of fails due to no dialtone.
CTR nvDialstatNfail	1.3.6.1.4.1.230.5.1.36.3.1.13	Counter	read-only	Number of failed dial-out attempts.
CTR nvDialstatNinvnum	1.3.6.1.4.1.230.5.1.36.3.1.21	Counter	read-only	Number of fails because invalid user input received.
CTR nvDialstatNmiscfail	1.3.6.1.4.1.230.5.1.36.3.1.25	Counter	read-only	Number of miscellaneous failures not counted elsewhere.
CTR nvDialstatNmnegfail	1.3.6.1.4.1.230.5.1.36.3.1.23	Counter	read-only	Number of failed modem negotiation.
CTR nvDialstatNnoAnswer	1.3.6.1.4.1.230.5.1.36.3.1.22	Counter	read-only	Number of fails due to no answer.
CTR nvDialstatNnoInput	1.3.6.1.4.1.230.5.1.36.3.1.20	Counter	read-only	Number of fails because of no user input within time limit.
CTR nvDialstatNnoModem	1.3.6.1.4.1.230.5.1.36.3.1.19	Counter	read-only	Number of Fails because no modem was available.
CTR nvDialstatNnoRoute	1.3.6.1.4.1.230.5.1.36.3.1.18	Counter	read-only	Number of fails due to routing error.
CTR nvDialstatNsucceed	1.3.6.1.4.1.230.5.1.36.3.1.12	Counter	read-only	Number of successful dial-out attempts.
INT nvDialstatNumRec	1.3.6.1.4.1.230.5.1.36.2	INTEGER	read-only	number of records in use.
STR nvDialstatRcscpool	1.3.6.1.4.1.230.5.1.36.3.1.2	DisplayString	read-only	Resource Name.
nvDialstatTable	1.3.6.1.4.1.230.5.1.36.3		not-accessible	Dialstat table.
INT nvDialstatTrace	1.3.6.1.4.1.230.5.1.36.3.1.5	INTEGER	read-only	Is trace enabled?
nvDlconf	1.3.6.1.4.1.230.5.7.3
INT nvDlconfDlnumber	1.3.6.1.4.1.230.5.7.3.3.1.2	INTEGER	read-only	Data Link Record (dlnumber) Number of the DL,ie,record id# in DLCONF file. Parameter is set during factory configuration.
nvDlconfEntry	1.3.6.1.4.1.230.5.7.3.3.1		not-accessible	dlconf record.
INT nvDlconfLinkname	1.3.6.1.4.1.230.5.7.3.3.1.3	INTEGER	read-write	Link Name (linkname)
INT nvDlconfMaxRec	1.3.6.1.4.1.230.5.7.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvDlconfNumRec	1.3.6.1.4.1.230.5.7.3.2	INTEGER	read-only	number of records in use.
STR nvDlconfPuaddr	1.3.6.1.4.1.230.5.7.3.3.1.4	DisplayString	read-write	Polling Address (puaddr) Default value is 0.
nvDlconfTable	1.3.6.1.4.1.230.5.7.3.3		not-accessible	dlconf file.
nvDlspcconf	1.3.6.1.4.1.230.5.6.18
INT nvDlspcconfAbortmsg	1.3.6.1.4.1.230.5.6.18.3.1.5	INTEGER	read-write	message if session cannot be resumed.
nvDlspcconfEntry	1.3.6.1.4.1.230.5.6.18.3.1		not-accessible	dlspcconf record.
STR nvDlspcconfHelpphone	1.3.6.1.4.1.230.5.6.18.3.1.4	DisplayString	read-write	phone number part of help message.
INT nvDlspcconfIndex	1.3.6.1.4.1.230.5.6.18.3.1.1	INTEGER	read-only	Dlspcconf file record number.
INT nvDlspcconfMaxRec	1.3.6.1.4.1.230.5.6.18.1	INTEGER	read-only	total number of records allowed in database file.
STR nvDlspcconfNodename	1.3.6.1.4.1.230.5.6.18.3.1.2	DisplayString	read-write	name of node.
INT nvDlspcconfNumRec	1.3.6.1.4.1.230.5.6.18.2	INTEGER	read-only	number of records in use.
INT nvDlspcconfPidtable	1.3.6.1.4.1.230.5.6.18.3.1.6	INTEGER	read-write	to map X.3 P11 into protocol id.
INT nvDlspcconfPortalarm	1.3.6.1.4.1.230.5.6.18.3.1.7	INTEGER	read-write	number of idle ports to cause alarm.
STR nvDlspcconfSitename	1.3.6.1.4.1.230.5.6.18.3.1.3	DisplayString	read-write	name of site.
INT nvDlspcconfStatus	1.3.6.1.4.1.230.5.6.18.3.1.8	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvDlspcconfTable	1.3.6.1.4.1.230.5.6.18.3		not-accessible	dlspcconf file.
nvDlspcstat	1.3.6.1.4.1.230.5.6.6
nvDlspcstatEntry	1.3.6.1.4.1.230.5.6.6.3.1		not-accessible	dlspcstat record.
INT nvDlspcstatIndex	1.3.6.1.4.1.230.5.6.6.3.1.1	INTEGER	read-only	Number of dial records.
INT nvDlspcstatMaxRec	1.3.6.1.4.1.230.5.6.6.1	INTEGER	read-only	total number of records allowed in database file.
INT nvDlspcstatNidle	1.3.6.1.4.1.230.5.6.6.3.1.3	INTEGER	read-only	Number of idle dial ports.
INT nvDlspcstatNports	1.3.6.1.4.1.230.5.6.6.3.1.2	INTEGER	read-only	Number of dial ports.
INT nvDlspcstatNumRec	1.3.6.1.4.1.230.5.6.6.2	INTEGER	read-only	number of records in use.
nvDlspcstatTable	1.3.6.1.4.1.230.5.6.6.3		not-accessible	dlspcstat file.
nvDlstat	1.3.6.1.4.1.230.5.7.1
CTR nvDlstatAbtfrxs	1.3.6.1.4.1.230.5.7.1.3.1.10	Counter	read-only	a. Number of aborted frames received Statistic is zeroed at startup time.
CTR nvDlstatAlarms	1.3.6.1.4.1.230.5.7.1.3.1.11	Counter	read-only	Number of alarms. Statistic is zeroed at startup time.
INT nvDlstatApp	1.3.6.1.4.1.230.5.7.1.3.1.3	INTEGER	read-only	link appearence Initial status is 0+1.
STR nvDlstatDtreset	1.3.6.1.4.1.230.5.7.1.3.1.25	DisplayString	read-only	date & time statistics last reset
nvDlstatEntry	1.3.6.1.4.1.230.5.7.1.3.1		not-accessible	dlstat record.
CTR nvDlstatFrmrrxs	1.3.6.1.4.1.230.5.7.1.3.1.12	Counter	read-only	a. Number of frame-reject frames received Statistic is zeroed at startup time.
CTR nvDlstatFrmrtxs	1.3.6.1.4.1.230.5.7.1.3.1.13	Counter	read-only	Number of frame-reject frames transmitted. Statistic is zeroed at startup time.
CTR nvDlstatIfrxs	1.3.6.1.4.1.230.5.7.1.3.1.14	Counter	read-only	Number of I-frames received. Statistic is zeroed at startup time.
CTR nvDlstatIftxs	1.3.6.1.4.1.230.5.7.1.3.1.15	Counter	read-only	Number of I-frames transmitted. Statistic is zeroed at startup time.
INT nvDlstatIndex	1.3.6.1.4.1.230.5.7.1.3.1.1	INTEGER	read-only	Index of dlstat
INT nvDlstatLfrmr	1.3.6.1.4.1.230.5.7.1.3.1.4	INTEGER	read-only	reason code from last FRMR received Initial status is 0+1.
INT nvDlstatLinkname	1.3.6.1.4.1.230.5.7.1.3.1.2	INTEGER	read-only	name of link being used Initial status is 0+1.
INT nvDlstatLreset	1.3.6.1.4.1.230.5.7.1.3.1.5	INTEGER	read-only	reason for last link reset Initial status is 0+1.
INT nvDlstatMaxRec	1.3.6.1.4.1.230.5.7.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvDlstatMstate	1.3.6.1.4.1.230.5.7.1.3.1.6	INTEGER	read-only	main state of link Initial status is 0+1.
INT nvDlstatNumRec	1.3.6.1.4.1.230.5.7.1.2	INTEGER	read-only	number of records in use.
INT nvDlstatProtocol	1.3.6.1.4.1.230.5.7.1.3.1.7	INTEGER	read-only	link procedure selected Initial status is 3+1.
INT nvDlstatPstate	1.3.6.1.4.1.230.5.7.1.3.1.8	INTEGER	read-only	a. primary UP state Initial status is 1+1.
CTR nvDlstatRejrxs	1.3.6.1.4.1.230.5.7.1.3.1.16	Counter	read-only	Number of REJ-frames received. Statistic is zeroed at startup time.
CTR nvDlstatRejtxs	1.3.6.1.4.1.230.5.7.1.3.1.17	Counter	read-only	Number of REJ-frames transmitted. Statistic is zeroed at startup time.
CTR nvDlstatRnrrxs	1.3.6.1.4.1.230.5.7.1.3.1.18	Counter	read-only	Number of RNR-frames received. Statistic is zeroed at startup time.
CTR nvDlstatRnrtxs	1.3.6.1.4.1.230.5.7.1.3.1.19	Counter	read-only	Number of RNR-frames transmitted. Statistic is zeroed at startup time.
CTR nvDlstatRrrxs	1.3.6.1.4.1.230.5.7.1.3.1.20	Counter	read-only	Number of RR-frames received. Statistic is zeroed at startup time.
CTR nvDlstatRrtxs	1.3.6.1.4.1.230.5.7.1.3.1.21	Counter	read-only	Number of RR-frames transmitted. Statistic is zeroed at startup time.
CTR nvDlstatRxdds	1.3.6.1.4.1.230.5.7.1.3.1.22	Counter	read-only	Number of receive device-driver errors. Statistic is zeroed at startup time.
INT nvDlstatSstate	1.3.6.1.4.1.230.5.7.1.3.1.9	INTEGER	read-only	Secondary UP state . Initial status is 1+1.
nvDlstatTable	1.3.6.1.4.1.230.5.7.1.3		not-accessible	dlstat file.
CTR nvDlstatTouts	1.3.6.1.4.1.230.5.7.1.3.1.23	Counter	read-only	Number of link resets due to remote timeouts. Statistic is zeroed at startup time.
CTR nvDlstatTretrys	1.3.6.1.4.1.230.5.7.1.3.1.24	Counter	read-only	Number of retries due to remote timeouts. Statistic is zeroed at startup time.
nvDportstat	1.3.6.1.4.1.230.5.6.8
INT nvDportstatChstate	1.3.6.1.4.1.230.5.6.8.3.1.5	INTEGER	read-only	Channel state
STR nvDportstatCli	1.3.6.1.4.1.230.5.6.8.3.1.11	DisplayString	read-only	Calling line identifier
TIK nvDportstatDowntime	1.3.6.1.4.1.230.5.6.8.3.1.14	TimeTicks	read-only	Number of minutes port idle
STR nvDportstatDtreset	1.3.6.1.4.1.230.5.6.8.3.1.18	DisplayString	read-only	date & time statistics last reset
INT nvDportstatDuihost	1.3.6.1.4.1.230.5.6.8.3.1.6	INTEGER	read-only	Type of DUI host
INT nvDportstatDuistatus	1.3.6.1.4.1.230.5.6.8.3.1.7	INTEGER	read-only	Status of DUI port
nvDportstatEntry	1.3.6.1.4.1.230.5.6.8.3.1		not-accessible	Dportstat record.
CTR nvDportstatIncalls	1.3.6.1.4.1.230.5.6.8.3.1.16	Counter	read-only	Number of incoming calls
INT nvDportstatIndex	1.3.6.1.4.1.230.5.6.8.3.1.1	INTEGER	read-only	a. index
INT nvDportstatIntfstate	1.3.6.1.4.1.230.5.6.8.3.1.4	INTEGER	read-only	Physical port state
INT nvDportstatMaxRec	1.3.6.1.4.1.230.5.6.8.1	INTEGER	read-only	total number of records allowed in database file.
INT nvDportstatNumRec	1.3.6.1.4.1.230.5.6.8.2	INTEGER	read-only	number of records in use.
CTR nvDportstatOutcalls	1.3.6.1.4.1.230.5.6.8.3.1.17	Counter	read-only	Number of outgoing calls
STR nvDportstatPortname	1.3.6.1.4.1.230.5.6.8.3.1.2	DisplayString	read-only	Port name
INT nvDportstatPorttype	1.3.6.1.4.1.230.5.6.8.3.1.8	INTEGER	read-only	Type of port
STR nvDportstatResetdate	1.3.6.1.4.1.230.5.6.8.3.1.12	DisplayString	read-only	Date when statistics were last reset
CTR nvDportstatSessions	1.3.6.1.4.1.230.5.6.8.3.1.15	Counter	read-only	Number of sessions
INT nvDportstatSetstate	1.3.6.1.4.1.230.5.6.8.3.1.3	INTEGER	read-only	State the port was last set to
nvDportstatTable	1.3.6.1.4.1.230.5.6.8.3		not-accessible	Dportstat file statistics.
TIK nvDportstatUptime	1.3.6.1.4.1.230.5.6.8.3.1.13	TimeTicks	read-only	Number of minutes port active
nvDrstat	1.3.6.1.4.1.230.5.1.22
INT nvDrstatClass	1.3.6.1.4.1.230.5.1.22.3.1.3	INTEGER	read-only	Device class of this pool.
STR nvDrstatDtreset	1.3.6.1.4.1.230.5.1.22.3.1.9	DisplayString	read-only	date & time statistics last reset
nvDrstatEntry	1.3.6.1.4.1.230.5.1.22.3.1		not-accessible	Device pool registry statistics record.
INT nvDrstatIndex	1.3.6.1.4.1.230.5.1.22.3.1.1	INTEGER	read-only	Device pool registry statistics entry index number.
INT nvDrstatMaxRec	1.3.6.1.4.1.230.5.1.22.1	INTEGER	read-only	total number of records allowed in database file.
INT nvDrstatMaxused	1.3.6.1.4.1.230.5.1.22.3.1.8	INTEGER	read-only	Maximum number of numused since last box reset.
STR nvDrstatName	1.3.6.1.4.1.230.5.1.22.3.1.2	DisplayString	read-only	Device pool registry statistics entry name.
INT nvDrstatNumavail	1.3.6.1.4.1.230.5.1.22.3.1.6	INTEGER	read-only	Number of devices available for allocation.
INT nvDrstatNumdev	1.3.6.1.4.1.230.5.1.22.3.1.4	INTEGER	read-only	Number of devices registered to this pool.
INT nvDrstatNumRec	1.3.6.1.4.1.230.5.1.22.2	INTEGER	read-only	number of records in use.
INT nvDrstatNumrsrvd	1.3.6.1.4.1.230.5.1.22.3.1.5	INTEGER	read-only	Number of devices reserved to this pool.
INT nvDrstatNumused	1.3.6.1.4.1.230.5.1.22.3.1.7	INTEGER	read-only	Number of devices presently allocated for use.
nvDrstatTable	1.3.6.1.4.1.230.5.1.22.3		not-accessible	Device pool registry statistics.
nvDspmalloc	1.3.6.1.4.1.230.5.1.35
INT nvDspmallocDsptype	1.3.6.1.4.1.230.5.1.35.3.1.2	INTEGER	read-only	Type of DSP - kflex or V.90.
nvDspmallocEntry	1.3.6.1.4.1.230.5.1.35.3.1		not-accessible	Dspmalloc table record.
INT nvDspmallocIndex	1.3.6.1.4.1.230.5.1.35.3.1.1	INTEGER	read-only	Index of dspmalloc record
INT nvDspmallocMaxRec	1.3.6.1.4.1.230.5.1.35.1	INTEGER	read-only	total number of records allowed in database file.
INT nvDspmallocNumRec	1.3.6.1.4.1.230.5.1.35.2	INTEGER	read-only	number of records in use.
INT nvDspmallocStatus	1.3.6.1.4.1.230.5.1.35.3.1.10	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvDspmallocTable	1.3.6.1.4.1.230.5.1.35.3		not-accessible	Dspmalloc table.
INT nvDspmallocWeight	1.3.6.1.4.1.230.5.1.35.3.1.3	INTEGER	read-write	Allocation proportion.
nvDuiconf	1.3.6.1.4.1.230.5.6.17
STR nvDuiconfCalling	1.3.6.1.4.1.230.5.6.17.3.1.4	DisplayString	read-write	calling address.
nvDuiconfEntry	1.3.6.1.4.1.230.5.6.17.3.1		not-accessible	duiconf record.
INT nvDuiconfFirsttry	1.3.6.1.4.1.230.5.6.17.3.1.5	INTEGER	read-write	num seconds til first try.
INT nvDuiconfIndex	1.3.6.1.4.1.230.5.6.17.3.1.1	INTEGER	read-only	index
INT nvDuiconfMaxRec	1.3.6.1.4.1.230.5.6.17.1	INTEGER	read-only	total number of records allowed in database file.
STR nvDuiconfNua	1.3.6.1.4.1.230.5.6.17.3.1.3	DisplayString	read-write	X.121 address of DUI host.
INT nvDuiconfNumRec	1.3.6.1.4.1.230.5.6.17.2	INTEGER	read-only	number of records in use.
INT nvDuiconfRetryinc	1.3.6.1.4.1.230.5.6.17.3.1.7	INTEGER	read-write	retry time increment (in seconds).
INT nvDuiconfRetrytime	1.3.6.1.4.1.230.5.6.17.3.1.6	INTEGER	read-write	num seconds for retry.
INT nvDuiconfStatus	1.3.6.1.4.1.230.5.6.17.3.1.9	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvDuiconfTable	1.3.6.1.4.1.230.5.6.17.3		not-accessible	duiconf file.
INT nvDuiconfType	1.3.6.1.4.1.230.5.6.17.3.1.2	INTEGER	read-only	Type of DUI Circuit.
nvDuistat	1.3.6.1.4.1.230.5.6.7
STR nvDuistatDtreset	1.3.6.1.4.1.230.5.6.7.3.1.15	DisplayString	read-only	date & time statistics last reset
nvDuistatEntry	1.3.6.1.4.1.230.5.6.7.3.1		not-accessible	Duistat record.
INT nvDuistatIndex	1.3.6.1.4.1.230.5.6.7.3.1.1	INTEGER	read-only	index
INT nvDuistatLastcause	1.3.6.1.4.1.230.5.6.7.3.1.7	INTEGER	read-only	Last clear cause code.
INT nvDuistatLastdiag	1.3.6.1.4.1.230.5.6.7.3.1.8	INTEGER	read-only	Last clear diagnostic.
INT nvDuistatLcn	1.3.6.1.4.1.230.5.6.7.3.1.6	INTEGER	read-only	LCN of virual circuit.
INT nvDuistatLink	1.3.6.1.4.1.230.5.6.7.3.1.5	INTEGER	read-only	Link carrying virual circuit.
INT nvDuistatMaxRec	1.3.6.1.4.1.230.5.6.7.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvDuistatNaccepts	1.3.6.1.4.1.230.5.6.7.3.1.12	Counter	read-only	Number of accepts.
CTR nvDuistatNinvmsgs	1.3.6.1.4.1.230.5.6.7.3.1.13	Counter	read-only	Number of invalid DUI messages received.
INT nvDuistatNmnxtcall	1.3.6.1.4.1.230.5.6.7.3.1.9	INTEGER	read-only	Number of minutes until next call.
CTR nvDuistatNrejects	1.3.6.1.4.1.230.5.6.7.3.1.11	Counter	read-only	Number of rejects.
CTR nvDuistatNretries	1.3.6.1.4.1.230.5.6.7.3.1.10	Counter	read-only	Number of retries.
STR nvDuistatNua	1.3.6.1.4.1.230.5.6.7.3.1.3	DisplayString	read-only	Last address used.
INT nvDuistatNumRec	1.3.6.1.4.1.230.5.6.7.2	INTEGER	read-only	number of records in use.
CTR nvDuistatNunxmsgs	1.3.6.1.4.1.230.5.6.7.3.1.14	Counter	read-only	Number of unexpected DUI messages received.
INT nvDuistatState	1.3.6.1.4.1.230.5.6.7.3.1.4	INTEGER	read-only	State of DUI Circuit.
nvDuistatTable	1.3.6.1.4.1.230.5.6.7.3		not-accessible	duistat file statistics.
INT nvDuistatType	1.3.6.1.4.1.230.5.6.7.3.1.2	INTEGER	read-only	Type of DUI Circuit.
nvElxconf	1.3.6.1.4.1.230.5.15.2
INT nvElxconfEnable	1.3.6.1.4.1.230.5.15.2.3.1.2	INTEGER	read-write	Ethernet interface enabled (enable) This field indicates whether or not the Ethernet interface should be enabled. Note that disabling the interface does not disable IP. IP may still route between its other networks,such as X.25 and Frame Relay. Default value is yes (1+1).
nvElxconfEntry	1.3.6.1.4.1.230.5.15.2.3.1		not-accessible	elxconf record.
INT nvElxconfInactivty	1.3.6.1.4.1.230.5.15.2.3.1.3	INTEGER	read-write	Inactivity test frame timer (inactivty) When this time in minutes has been exceeded with no activity on the Ethernet,a frame will be transmitted in order to check for transmit faults. Default value is 0.
INT nvElxconfIndex	1.3.6.1.4.1.230.5.15.2.3.1.1	INTEGER	read-only	Index of elxconf record
INT nvElxconfMaxRec	1.3.6.1.4.1.230.5.15.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvElxconfNumRec	1.3.6.1.4.1.230.5.15.2.2	INTEGER	read-only	number of records in use.
nvElxconfTable	1.3.6.1.4.1.230.5.15.2.3		not-accessible	elxconf file.
nvElxstat	1.3.6.1.4.1.230.5.15.1
INT nvElxstatAdminStat	1.3.6.1.4.1.230.5.15.1.3.1.3	INTEGER	read-only	Desired Interface state (AdminStat) The desired state of the interface. This field reflects the desired state of the interface as determined by the enable field of the ELXCONF file,as well as the ELX.UP and ELX.DOWN commands.
STR nvElxstatDtreset	1.3.6.1.4.1.230.5.15.1.3.1.16	DisplayString	read-only	date & time statistics last reset
nvElxstatEntry	1.3.6.1.4.1.230.5.15.1.3.1		not-accessible	elxstat record.
INT nvElxstatIndex	1.3.6.1.4.1.230.5.15.1.3.1.1	INTEGER	read-only	Index of elxstat record
CTR nvElxstatInDiscards	1.3.6.1.4.1.230.5.15.1.3.1.8	Counter	read-only	Discarded input packets (InDiscard) The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Statistic is zeroed at startup time.
CTR nvElxstatInErrors	1.3.6.1.4.1.230.5.15.1.3.1.9	Counter	read-only	Error input packets (InError) The number of inbound packets that contained errors preventing them from being deliverable to a higher layer protocol. Statistic is zeroed at startup time.
CTR nvElxstatInNUcasts	1.3.6.1.4.1.230.5.15.1.3.1.7	Counter	read-only	Non unicast packets delivered (InNUcast) The number of non unicast,i.e.,subnetwork broadcast or subnetwork multicast,packets delivered to a higher layer protocol. Statistic is zeroed at startup time.
CTR nvElxstatInOctets	1.3.6.1.4.1.230.5.15.1.3.1.5	Counter	read-only	Octets received on the interface (InOctets) The total number of octets received on the interface, including framing characters. Statistic is zeroed at startup time.
CTR nvElxstatInUcasts	1.3.6.1.4.1.230.5.15.1.3.1.6	Counter	read-only	Unicast packets delivered (InUcast) The number of subnetwork unicast packets delivered to a higher layer protocol. Statistic is zeroed at startup time.
INT nvElxstatMaxRec	1.3.6.1.4.1.230.5.15.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvElxstatNumRec	1.3.6.1.4.1.230.5.15.1.2	INTEGER	read-only	number of records in use.
INT nvElxstatOperStat	1.3.6.1.4.1.230.5.15.1.3.1.4	INTEGER	read-only	Current Interface state (OperStat) The current operational state of the Ethernet interface. This is determined by the AdminStat and whether or not any transmit faults were detected.
CTR nvElxstatOutDiscrds	1.3.6.1.4.1.230.5.15.1.3.1.14	Counter	read-only	Discarded output packets (OutDiscrd) The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Statistic is zeroed at startup time.
CTR nvElxstatOutErrors	1.3.6.1.4.1.230.5.15.1.3.1.15	Counter	read-only	Error output packets (OutErrors) The number of outbound packets that could not be transmitted because of errors. Statistic is zeroed at startup time.
CTR nvElxstatOutNUcasts	1.3.6.1.4.1.230.5.15.1.3.1.13	Counter	read-only	Non unicast packets transmitted (OutNUcast) The total number of packets that highel level protocols requested be transmitted to a non unicast,i.e.,a subnetwork broadcast or subnetwork multicast,address, including those that were discarded or not sent. Statistic is zeroed at startup time.
CTR nvElxstatOutOctets	1.3.6.1.4.1.230.5.15.1.3.1.11	Counter	read-only	Octets transmitted from the interface (OutOctets) The total number of octets transmitted out the interface,including framing characters. Statistic is zeroed at startup time.
CTR nvElxstatOutUcasts	1.3.6.1.4.1.230.5.15.1.3.1.12	Counter	read-only	Unicast packets transmitted (OutUcast) The total number of packets that higher level protocols requested be transmitted to a subnetwork unicast address, including those that were discarded or not sent. Statistic is zeroed at startup time.
STR nvElxstatPhysAddr	1.3.6.1.4.1.230.5.15.1.3.1.2	DisplayString	read-only	Ethernet Physical Address (PhysAddr) This field contains the Ethernet address as configured at the factory.
nvElxstatTable	1.3.6.1.4.1.230.5.15.1.3		not-accessible	elxstat file.
CTR nvElxstatUnKnwnPrs	1.3.6.1.4.1.230.5.15.1.3.1.10	Counter	read-only	Unknown protocol packets discarded (UnKnwnPr) The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Statistic is zeroed at startup time.
nvFriconf	1.3.6.1.4.1.230.5.5.4
INT nvFriconfDlci	1.3.6.1.4.1.230.5.5.4.3.1.11	INTEGER	read-write	LMI's DLCI (dlci) Default value is 1023.
nvFriconfEntry	1.3.6.1.4.1.230.5.5.4.3.1		not-accessible	friconf record.
INT nvFriconfIndex	1.3.6.1.4.1.230.5.5.4.3.1.1	INTEGER	read-only	Index of friconf record
INT nvFriconfLmitype	1.3.6.1.4.1.230.5.5.4.3.1.8	INTEGER	read-write	Style of LMI operation (lmitype) Default value is go4 (1+1).
INT nvFriconfMaxfrmsz	1.3.6.1.4.1.230.5.5.4.3.1.6	INTEGER	read-write	Maximum Frame Size (maxfrmsz) Default value is 140.
INT nvFriconfMaxRec	1.3.6.1.4.1.230.5.5.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvFriconfMode	1.3.6.1.4.1.230.5.5.4.3.1.9	INTEGER	read-write	Mode of FRI Operation (mode) Default value is user (0+1).
INT nvFriconfnN1	1.3.6.1.4.1.230.5.5.4.3.1.19	INTEGER	read-write	LMI Full Status Poll Frequency (nN1) Default value is 6.
INT nvFriconfnN2	1.3.6.1.4.1.230.5.5.4.3.1.20	INTEGER	read-write	LMI Error Threshold (nN2) Default value is 2.
INT nvFriconfnN3	1.3.6.1.4.1.230.5.5.4.3.1.21	INTEGER	read-write	LMI Error History Length (nN3) Default value is 4.
INT nvFriconfnN4	1.3.6.1.4.1.230.5.5.4.3.1.22	INTEGER	read-only	Max Polls Within nT3 (nN4). Default value is 5.
INT nvFriconfnP1	1.3.6.1.4.1.230.5.5.4.3.1.23	INTEGER	read-write	Max PVCs allowed FRI (nP1) Default value is 1.
INT nvFriconfnT1	1.3.6.1.4.1.230.5.5.4.3.1.12	INTEGER	read-write	LMI Polling Interval (nT1) Default value is 10.
INT nvFriconfnT2	1.3.6.1.4.1.230.5.5.4.3.1.13	INTEGER	read-write	Max Time Between Polls (nT2) Default value is 15.
INT nvFriconfnT3	1.3.6.1.4.1.230.5.5.4.3.1.14	INTEGER	read-write	Max Polls per nN4 (nT3) Default value is 20.
INT nvFriconfNumRec	1.3.6.1.4.1.230.5.5.4.2	INTEGER	read-only	number of records in use.
STR nvFriconfPort	1.3.6.1.4.1.230.5.5.4.3.1.2	DisplayString	read-write	Physical Port (port)
STR nvFriconfRsrcpool	1.3.6.1.4.1.230.5.5.4.3.1.3	DisplayString	read-write	Resource pool
INT nvFriconfStatus	1.3.6.1.4.1.230.5.5.4.3.1.29	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvFriconfTable	1.3.6.1.4.1.230.5.5.4.3		not-accessible	friconf file.
nvFristat	1.3.6.1.4.1.230.5.5.2
INT nvFristatCurseq	1.3.6.1.4.1.230.5.5.2.3.1.5	INTEGER	read-only	Transmitted LMI sequence number
STR nvFristatDtreset	1.3.6.1.4.1.230.5.5.2.3.1.10	DisplayString	read-only	date & time statistics last reset
nvFristatEntry	1.3.6.1.4.1.230.5.5.2.3.1		not-accessible	fristat record.
CTR nvFristatErrorcounts	1.3.6.1.4.1.230.5.5.2.3.1.7	Counter	read-only	LMI errors during recorded history Statistic is zeroed at startup time.
INT nvFristatIndex	1.3.6.1.4.1.230.5.5.2.3.1.1	INTEGER	read-only	Index of Fristat record
INT nvFristatLmistate	1.3.6.1.4.1.230.5.5.2.3.1.4	INTEGER	read-only	LMI Operational state Initial status is 0+1.
INT nvFristatMaxRec	1.3.6.1.4.1.230.5.5.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvFristatNumRec	1.3.6.1.4.1.230.5.5.2.2	INTEGER	read-only	number of records in use.
INT nvFristatOperstate	1.3.6.1.4.1.230.5.5.2.3.1.3	INTEGER	read-only	FRI Operational state Initial status is 0+1.
STR nvFristatPort	1.3.6.1.4.1.230.5.5.2.3.1.2	DisplayString	read-only	Physical Port
INT nvFristatRcvseq	1.3.6.1.4.1.230.5.5.2.3.1.6	INTEGER	read-only	Received LMI sequence number
CTR nvFristatRxbaddlcis	1.3.6.1.4.1.230.5.5.2.3.1.9	Counter	read-only	Invalid dlci Incoming Frames Statistic is zeroed at startup time.
CTR nvFristatRxexceszes	1.3.6.1.4.1.230.5.5.2.3.1.8	Counter	read-only	Too Large Incoming Frames Statistic is zeroed at startup time.
nvFristatTable	1.3.6.1.4.1.230.5.5.2.3		not-accessible	fristat file.
INT nvFrmrstatCallsPresent	1.3.6.1.4.1.230.5.1.37.1.8	INTEGER	read-only	number of calls currently up.
nvFrmrstatEntry	1.3.6.1.4.1.230.5.1.37.1		not-accessible	Framer card statistics record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active.
INT nvFrmrstatFailCause	1.3.6.1.4.1.230.5.1.37.1.3	INTEGER	read-only	Reason for last failure.
INT nvFrmrstatNumFailUp	1.3.6.1.4.1.230.5.1.37.1.10	INTEGER	read-only	number of failed port ups.
INT nvFrmrstatNumFailures	1.3.6.1.4.1.230.5.1.37.1.5	INTEGER	read-only	Number of download attempts.
INT nvFrmrstatNumPortUp	1.3.6.1.4.1.230.5.1.37.1.9	INTEGER	read-only	number of successful port ups.
INT nvFrmrstatNumReloads	1.3.6.1.4.1.230.5.1.37.1.6	INTEGER	read-only	Number of successful reloads.
INT nvFrmrstatNumRxBytes	1.3.6.1.4.1.230.5.1.37.1.14	INTEGER	read-only	number of bytes received.
INT nvFrmrstatNumRxFrames	1.3.6.1.4.1.230.5.1.37.1.12	INTEGER	read-only	number of frames received.
INT nvFrmrstatNumTxBytes	1.3.6.1.4.1.230.5.1.37.1.13	INTEGER	read-only	Number of bytes transmitted.
INT nvFrmrstatNumTxFrames	1.3.6.1.4.1.230.5.1.37.1.11	INTEGER	read-only	number of frames transmitted.
STR nvFrmrstatResetTime	1.3.6.1.4.1.230.5.1.37.1.4	DisplayString	read-only	Date and Time of last framer card reset.
INT nvFrmrstatSlotIndex	1.3.6.1.4.1.230.5.1.37.1.1	INTEGER	read-only	Framer card slot number.
INT nvFrmrstatState	1.3.6.1.4.1.230.5.1.37.1.2	INTEGER	read-only	State of framer card.
nvFrmrstatTable	1.3.6.1.4.1.230.5.1.37		not-accessible	Framer card statistics table definition. The actual framer card database has 17 tables. Each table uses name convention: frmrstat plus slot number. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires the slot number
INT nvFrmrstatTotalCalls	1.3.6.1.4.1.230.5.1.37.1.7	INTEGER	read-only	number of smartport calls made.
nvFrstat	1.3.6.1.4.1.230.5.5.1
GAU nvFrstatCurtime	1.3.6.1.4.1.230.5.5.1.1	Gauge	read-only	Minutes into current 15-minute cycle Statistic is zeroed at startup time.
STR nvFrstatDtreset	1.3.6.1.4.1.230.5.5.1.10	DisplayString	read-only	date & time statistics last reset
GAU nvFrstatMrxavgfps	1.3.6.1.4.1.230.5.5.1.9	Gauge	read-only	Average mapped Rx Frames/Second for 15-minute cycle Statistic is zeroed at startup time.
GAU nvFrstatMrxcurfps	1.3.6.1.4.1.230.5.5.1.8	Gauge	read-only	Current snapshot of mapped Rx Frames/Second Statistic is zeroed at startup time.
GAU nvFrstatMtxavgfps	1.3.6.1.4.1.230.5.5.1.7	Gauge	read-only	Average mapped Tx Frames/Second for 15-minute cycle Statistic is zeroed at startup time.
GAU nvFrstatMtxcurfps	1.3.6.1.4.1.230.5.5.1.6	Gauge	read-only	Current snapshot of mapped Tx Frames/Second Statistic is zeroed at startup time.
GAU nvFrstatRxavgfps	1.3.6.1.4.1.230.5.5.1.5	Gauge	read-only	Average Rx Frames/Second for 15-minute cycle Statistic is zeroed at startup time.
GAU nvFrstatRxcurfps	1.3.6.1.4.1.230.5.5.1.4	Gauge	read-only	Current snapshot of Rx Frames/Second Statistic is zeroed at startup time.
GAU nvFrstatTxavgfps	1.3.6.1.4.1.230.5.5.1.3	Gauge	read-only	Average Tx Frames/Second for 15-minute cycle Statistic is zeroed at startup time.
GAU nvFrstatTxcurfps	1.3.6.1.4.1.230.5.5.1.2	Gauge	read-only	Current snapshot of Tx Frames/Second Statistic is zeroed at startup time.
nvFrvcconf	1.3.6.1.4.1.230.5.5.5
INT nvFrvcconfBc	1.3.6.1.4.1.230.5.5.5.3.1.15	INTEGER	read-write	Committed Burst Size (bc)
INT nvFrvcconfBe	1.3.6.1.4.1.230.5.5.5.3.1.16	INTEGER	read-write	Excess Burst Size (be)
INT nvFrvcconfDlci	1.3.6.1.4.1.230.5.5.5.3.1.2	INTEGER	read-write	DLCI of this PVC (dlci)
INT nvFrvcconfEnable	1.3.6.1.4.1.230.5.5.5.3.1.11	INTEGER	read-write	Is this PVC enabled? (enable) Default value is yse (1+1).
nvFrvcconfEntry	1.3.6.1.4.1.230.5.5.5.3.1		not-accessible	frvcconf record.
INT nvFrvcconfFri	1.3.6.1.4.1.230.5.5.5.3.1.6	INTEGER	read-write	FRI of this PVC (fri)
INT nvFrvcconfIndex	1.3.6.1.4.1.230.5.5.5.3.1.1	INTEGER	read-only	Index of frvcconf record
INT nvFrvcconfMappedpvc	1.3.6.1.4.1.230.5.5.5.3.1.8	INTEGER	read-write	Recnum of Mapped PVC (mappedpvc)
INT nvFrvcconfMaxRec	1.3.6.1.4.1.230.5.5.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvFrvcconfN	1.3.6.1.4.1.230.5.5.5.3.1.17	INTEGER	read-write	Incoming BECN Threshold (n)
INT nvFrvcconfNumRec	1.3.6.1.4.1.230.5.5.5.2	INTEGER	read-only	number of records in use.
INT nvFrvcconfRxbufspac	1.3.6.1.4.1.230.5.5.5.3.1.20	INTEGER	read-write	Receive Buffer Space (rxbufspac) Default value is 1.
INT nvFrvcconfRxcgclear	1.3.6.1.4.1.230.5.5.5.3.1.22	INTEGER	read-write	Rcv Cong. Clear Thrshld (rxcgclear).
INT nvFrvcconfRxcgthres	1.3.6.1.4.1.230.5.5.5.3.1.21	INTEGER	read-write	Rcv Congestion Thrshld (rxcgthres)
INT nvFrvcconfStatus	1.3.6.1.4.1.230.5.5.5.3.1.27	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
INT nvFrvcconfT	1.3.6.1.4.1.230.5.5.5.3.1.12	INTEGER	read-write	Rate Monitoring Period (t)
nvFrvcconfTable	1.3.6.1.4.1.230.5.5.5.3		not-accessible	frvcconf file.
nvFrvcstat	1.3.6.1.4.1.230.5.5.3
INT nvFrvcstatDlci	1.3.6.1.4.1.230.5.5.3.3.1.5	INTEGER	read-only	DLCI of this PVC
CTR nvFrvcstatDrprxdes	1.3.6.1.4.1.230.5.5.3.3.1.15	Counter	read-only	Received DE Frames Dropped Statistic is zeroed at startup time.
CTR nvFrvcstatDrprxs	1.3.6.1.4.1.230.5.5.3.3.1.14	Counter	read-only	Received Frames Dropped Statistic is zeroed at startup time.
STR nvFrvcstatDtreset	1.3.6.1.4.1.230.5.5.3.3.1.16	DisplayString	read-only	date & time statistics last reset
nvFrvcstatEntry	1.3.6.1.4.1.230.5.5.3.3.1		not-accessible	frvcstat record.
CTR nvFrvcstatExcessdatas	1.3.6.1.4.1.230.5.5.3.3.1.11	Counter	read-only	Data over output limit Statistic is zeroed at startup time.
INT nvFrvcstatFri	1.3.6.1.4.1.230.5.5.3.3.1.4	INTEGER	read-only	FRI of this PVC (FRICONF recnum)
INT nvFrvcstatIndex	1.3.6.1.4.1.230.5.5.3.3.1.1	INTEGER	read-only	Index of Frvcstat
GAU nvFrvcstatInputrate	1.3.6.1.4.1.230.5.5.3.3.1.10	Gauge	read-only	Input during last period (bytes) Statistic is zeroed at startup time.
INT nvFrvcstatMaxRec	1.3.6.1.4.1.230.5.5.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvFrvcstatNumRec	1.3.6.1.4.1.230.5.5.3.2	INTEGER	read-only	number of records in use.
GAU nvFrvcstatOutputrate	1.3.6.1.4.1.230.5.5.3.3.1.9	Gauge	read-only	Output during last period (bytes) Statistic is zeroed at startup time.
GAU nvFrvcstatRxbufdepletion	1.3.6.1.4.1.230.5.5.3.3.1.8	Gauge	read-only	Receive Buffer Depletion Statistic is zeroed at startup time.
CTR nvFrvcstatRxframes	1.3.6.1.4.1.230.5.5.3.3.1.13	Counter	read-only	Received Frame Counter Statistic is zeroed at startup time.
STR nvFrvcstatService	1.3.6.1.4.1.230.5.5.3.3.1.2	DisplayString	read-only	Connected Component ID
STR nvFrvcstatServiceid	1.3.6.1.4.1.230.5.5.3.3.1.3	DisplayString	read-only	Service Instance.
INT nvFrvcstatStatus	1.3.6.1.4.1.230.5.5.3.3.1.6	INTEGER	read-only	PVC Operational State Initial status is 0+1.
nvFrvcstatTable	1.3.6.1.4.1.230.5.5.3.3		not-accessible	frvcstat file.
INT nvFrvcstatTxcongstatus	1.3.6.1.4.1.230.5.5.3.3.1.7	INTEGER	read-only	Transmit Congestion Status Initial status is 0+1.
CTR nvFrvcstatTxframes	1.3.6.1.4.1.230.5.5.3.3.1.12	Counter	read-only	Transmitted Frame Counter Statistic is zeroed at startup time.
nvFtpconf	1.3.6.1.4.1.230.5.18.1
nvFtpconfEntry	1.3.6.1.4.1.230.5.18.1.3.1		not-accessible	ftpconf record, indexed by record number
INT nvFtpconfIndex	1.3.6.1.4.1.230.5.18.1.3.1.1	INTEGER	read-only	Index of ftpconf record
INT nvFtpconfMaxRec	1.3.6.1.4.1.230.5.18.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvFtpconfNumRec	1.3.6.1.4.1.230.5.18.1.2	INTEGER	read-only	number of records in use.
STR nvFtpconfPassword	1.3.6.1.4.1.230.5.18.1.3.1.4	DisplayString	read-write	FTPD user password.
STR nvFtpconfReqaddr	1.3.6.1.4.1.230.5.18.1.3.1.2	DisplayString	read-write	FTPD remote client IP address.
INT nvFtpconfStatus	1.3.6.1.4.1.230.5.18.1.3.1.10	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid). Reqaddr MUST be set to a valid value before adding new record (setting Status to valid).
nvFtpconfTable	1.3.6.1.4.1.230.5.18.1.3		not-accessible	ftpconf file.
INT nvFtpconfTimeout	1.3.6.1.4.1.230.5.18.1.3.1.5	INTEGER	read-write	FTPD user inactivity timer.
STR nvFtpconfUsername	1.3.6.1.4.1.230.5.18.1.3.1.3	DisplayString	read-write	FTPD username.
nvFtpstat	1.3.6.1.4.1.230.5.18.2
STR nvFtpstatClientaddr	1.3.6.1.4.1.230.5.18.2.10	DisplayString	read-only	client FTP host IP address.
INT nvFtpstatCommstat	1.3.6.1.4.1.230.5.18.2.12	INTEGER	read-only	last command status.
CTR nvFtpstatConnects	1.3.6.1.4.1.230.5.18.2.4	Counter	read-only	number of successful connections.
CTR nvFtpstatConnfails	1.3.6.1.4.1.230.5.18.2.5	Counter	read-only	number of connect request failures.
CTR nvFtpstatCurrfirecs	1.3.6.1.4.1.230.5.18.2.16	Counter	read-only	total number of files current user received.
CTR nvFtpstatCurrfisnds	1.3.6.1.4.1.230.5.18.2.17	Counter	read-only	total number of files current user sent.
CTR nvFtpstatCurrkbyrvs	1.3.6.1.4.1.230.5.18.2.18	Counter	read-only	total number of Kbytes current user server sent.
CTR nvFtpstatCurrkbysds	1.3.6.1.4.1.230.5.18.2.19	Counter	read-only	total number of Kbytes current user server received.
INT nvFtpstatCurrstat	1.3.6.1.4.1.230.5.18.2.11	INTEGER	read-only	current FTPD status.
STR nvFtpstatDtreset	1.3.6.1.4.1.230.5.18.2.20	DisplayString	read-only	date & time statistics last reset
INT nvFtpstatIndex	1.3.6.1.4.1.230.5.18.2.1	INTEGER	read-only	Index of ftpconf record
CTR nvFtpstatNumreqs	1.3.6.1.4.1.230.5.18.2.3	Counter	read-only	number of connection requested.
STR nvFtpstatServaddr	1.3.6.1.4.1.230.5.18.2.2	DisplayString	read-only	server FTP host IP address.
CTR nvFtpstatTotalerrs	1.3.6.1.4.1.230.5.18.2.15	Counter	read-only	total number of unsupported commands.
CTR nvFtpstatTotalfals	1.3.6.1.4.1.230.5.18.2.14	Counter	read-only	total number of commands executed with failure.
CTR nvFtpstatTotalfirvs	1.3.6.1.4.1.230.5.18.2.6	Counter	read-only	number of files server received.
CTR nvFtpstatTotalfisds	1.3.6.1.4.1.230.5.18.2.7	Counter	read-only	number of files server sent.
CTR nvFtpstatTotalkbyrvs	1.3.6.1.4.1.230.5.18.2.8	Counter	read-only	number of Kbytes server received.
CTR nvFtpstatTotalkbysds	1.3.6.1.4.1.230.5.18.2.9	Counter	read-only	number of Kbytes server sent.
CTR nvFtpstatTotalsucs	1.3.6.1.4.1.230.5.18.2.13	Counter	read-only	total number of commands executed successfully.
nvIcmpstat	1.3.6.1.4.1.230.5.16.6
STR nvIcmpstatDtreset	1.3.6.1.4.1.230.5.16.6.3.1.28	DisplayString	read-only	date & time statistics last reset
nvIcmpstatEntry	1.3.6.1.4.1.230.5.16.6.3.1		not-accessible	icmpstat record.
CTR nvIcmpstatInAdMs	1.3.6.1.4.1.230.5.16.6.3.1.13	Counter	read-only	Address Mask Request messages received (InAdMs) The number of ICMP Address Mask Request messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInAdMsRps	1.3.6.1.4.1.230.5.16.6.3.1.14	Counter	read-only	Address Mask Reply messages received (InAdMsRp) The number of ICMP Address Mask Reply messages received. Statistic is zeroed at startup time.
INT nvIcmpstatIndex	1.3.6.1.4.1.230.5.16.6.3.1.1	INTEGER	read-only	Index of icmpstat record
CTR nvIcmpstatInDstUnrs	1.3.6.1.4.1.230.5.16.6.3.1.4	Counter	read-only	Destination Unreachable messages recieved (InDstUnr) The number of ICMP Destination Unreachable messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInEchRps	1.3.6.1.4.1.230.5.16.6.3.1.10	Counter	read-only	Echo Reply messages received (InEchRp) The number of ICMP Echo Reply messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInEchs	1.3.6.1.4.1.230.5.16.6.3.1.9	Counter	read-only	Echo Request messages received (InEch) The number of ICMP Echo (request) messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInErrs	1.3.6.1.4.1.230.5.16.6.3.1.3	Counter	read-only	Input errors received (InErrs) The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums,bad length,etc.). Statistic is zeroed at startup time.
CTR nvIcmpstatInMsgs	1.3.6.1.4.1.230.5.16.6.3.1.2	Counter	read-only	Input messages received (InMsgs) The total number of ICMP messages which the entity received. Note that this counter includes all those counted by InErrs. Statistic is zeroed at startup time.
CTR nvIcmpstatInPrmPrbs	1.3.6.1.4.1.230.5.16.6.3.1.6	Counter	read-only	Parameter Problem messages received (InPrmPrb) The number of ICMP Parameter Problem messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInRdrcts	1.3.6.1.4.1.230.5.16.6.3.1.8	Counter	read-only	Redirect messages received (InRdrct) The number of ICMP Redirect messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInSrcQus	1.3.6.1.4.1.230.5.16.6.3.1.7	Counter	read-only	Source Quench messages received (InSrcQu) The number of ICMP Source Quench messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInTmExcds	1.3.6.1.4.1.230.5.16.6.3.1.5	Counter	read-only	Time Exceeded messages received (InTmExcd) The number of ICMP Time Exceeded messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInTmStRps	1.3.6.1.4.1.230.5.16.6.3.1.12	Counter	read-only	Timestamp Reply messages received (InTmStRp) The number of ICMP Timestamp Reply messages received. Statistic is zeroed at startup time.
CTR nvIcmpstatInTmSts	1.3.6.1.4.1.230.5.16.6.3.1.11	Counter	read-only	Timestamp Request messages received (InTmSt) The number of ICMP Timestamp (request) messages received. Statistic is zeroed at startup time.
INT nvIcmpstatMaxRec	1.3.6.1.4.1.230.5.16.6.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIcmpstatNumRec	1.3.6.1.4.1.230.5.16.6.2	INTEGER	read-only	number of records in use.
CTR nvIcmpstatOutAdMs	1.3.6.1.4.1.230.5.16.6.3.1.26	Counter	read-only	Address Mask Request messages sent (OutAdMs) The number of ICMP Address Mask Request messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutAdMsRps	1.3.6.1.4.1.230.5.16.6.3.1.27	Counter	read-only	Address Mask Reply messages sent (OutAdMsRp) The number of ICMP Address Mask Reply messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutDstUnrs	1.3.6.1.4.1.230.5.16.6.3.1.17	Counter	read-only	Destination Unreachable messages sent (OutDstUnr) The number of ICMP Destination Unreachable messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutEchRps	1.3.6.1.4.1.230.5.16.6.3.1.23	Counter	read-only	Echo Reply messages sent (OutEchRp) The number of ICMP Echo Reply messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutEchs	1.3.6.1.4.1.230.5.16.6.3.1.22	Counter	read-only	Echo Request messages sent (OutEch) The number of ICMP Echo (request) messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutErrs	1.3.6.1.4.1.230.5.16.6.3.1.16	Counter	read-only	Output messages not sent (OutErrs) The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of errors which contribute to this counter's value. Statistic is zeroed at startup time.
CTR nvIcmpstatOutMsgs	1.3.6.1.4.1.230.5.16.6.3.1.15	Counter	read-only	Output messages attempted (OutMsgs) The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by OutErrs. Statistic is zeroed at startup time.
CTR nvIcmpstatOutPrmPrbs	1.3.6.1.4.1.230.5.16.6.3.1.19	Counter	read-only	Parameter Problem messages sent (OutPrmPrb) The number of ICMP Parameter Problem messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutRdrcts	1.3.6.1.4.1.230.5.16.6.3.1.21	Counter	read-only	Redirect messages sent (OutRdrct) The number of ICMP Redirect messages sent. For a host,this object will always be zero,since hosts do not send redirects. Statistic is zeroed at startup time.
CTR nvIcmpstatOutSrcQus	1.3.6.1.4.1.230.5.16.6.3.1.20	Counter	read-only	Source Quench messages sent (OutSrcQu) The number of ICMP Source Quench messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutTmExcds	1.3.6.1.4.1.230.5.16.6.3.1.18	Counter	read-only	Time Exceeded messages sent (OutTmExcd) The number of ICMP Time Exceeded messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutTmStRps	1.3.6.1.4.1.230.5.16.6.3.1.25	Counter	read-only	Timestamp Reply messages sent (OutTmStRp) The number of ICMP Timestamp Reply messages sent. Statistic is zeroed at startup time.
CTR nvIcmpstatOutTmSts	1.3.6.1.4.1.230.5.16.6.3.1.24	Counter	read-only	Timestamp Request meessages sent (OutTmSt) The number of ICMP Timestamp (request) messages sent. Statistic is zeroed at startup time.
nvIcmpstatTable	1.3.6.1.4.1.230.5.16.6.3		not-accessible	icmpstat file.
nvIfStackInfo	1.3.6.1.4.1.230.5.1.33
nvIfStackInfoEntry	1.3.6.1.4.1.230.5.1.33.2.1		not-accessible	IfStackInfo record.
INT nvIfStackInfoHigherLI	1.3.6.1.4.1.230.5.1.33.2.1.1	INTEGER	read-only	highre layer interface number.
INT nvIfStackInfoLowerLI	1.3.6.1.4.1.230.5.1.33.2.1.2	INTEGER	read-only	Lower layer interface number.
INT nvIfStackInfoNumRec	1.3.6.1.4.1.230.5.1.33.1	INTEGER	read-only	number of records in use.
INT nvIfStackInfoRid	1.3.6.1.4.1.230.5.1.33.2.1.4	INTEGER	read-only	Record ID to get info on this
INT nvIfStackInfoStatus	1.3.6.1.4.1.230.5.1.33.2.1.3	INTEGER	read-only	Status of the entry.
nvIfStackInfoTable	1.3.6.1.4.1.230.5.1.33.2		not-accessible	modemconf file.
nvIpconf	1.3.6.1.4.1.230.5.16.1
STR nvIpconfBcastaddr	1.3.6.1.4.1.230.5.16.1.3.1.9	DisplayString	read-write	Outgoing broadcast IP address (bcastaddr) This field is a 15 byte character string in IP dotted address format.
INT nvIpconfEncap	1.3.6.1.4.1.230.5.16.1.3.1.11	INTEGER	read-write	Encapsulation type Default value is v2 (0+1).
nvIpconfEntry	1.3.6.1.4.1.230.5.16.1.3.1		not-accessible	ipconf record.
INT nvIpconfIndex	1.3.6.1.4.1.230.5.16.1.3.1.1	INTEGER	read-only	Index of ipconf record
STR nvIpconfIpaddr	1.3.6.1.4.1.230.5.16.1.3.1.7	DisplayString	read-write	IP address of local LAN (ipaddr) This field is a 15 byte character string in IP dotted address format.
STR nvIpconfMask	1.3.6.1.4.1.230.5.16.1.3.1.8	DisplayString	read-write	IP network mask (mask) This field is a 15 byte character string in IP dotted address format.
INT nvIpconfMaxRec	1.3.6.1.4.1.230.5.16.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIpconfMtu	1.3.6.1.4.1.230.5.16.1.3.1.10	INTEGER	read-write	Maximum frame length on this interface (mtu) Default value is 1500.
INT nvIpconfNumRec	1.3.6.1.4.1.230.5.16.1.2	INTEGER	read-only	number of records in use.
INT nvIpconfRoutprot	1.3.6.1.4.1.230.5.16.1.3.1.12	INTEGER	read-write	IP routing protocol (routprot).
INT nvIpconfStatus	1.3.6.1.4.1.230.5.16.1.3.1.17	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvIpconfTable	1.3.6.1.4.1.230.5.16.1.3		not-accessible	ipconf file.
nvIpcpconf	1.3.6.1.4.1.230.5.16.8
INT nvIpcpconfCompress	1.3.6.1.4.1.230.5.16.8.3.1.3	INTEGER	read-write	compress flag.
STR nvIpcpconfDnsadd1	1.3.6.1.4.1.230.5.16.8.3.1.7	DisplayString	read-write	IP address of primary DNS server
STR nvIpcpconfDnsadd2	1.3.6.1.4.1.230.5.16.8.3.1.8	DisplayString	read-write	IP address of secondary DNS server
nvIpcpconfEntry	1.3.6.1.4.1.230.5.16.8.3.1		not-accessible	ipcpconf record.
INT nvIpcpconfIndex	1.3.6.1.4.1.230.5.16.8.3.1.1	INTEGER	read-only	Index of Ipcpconf record.
INT nvIpcpconfLcp	1.3.6.1.4.1.230.5.16.8.3.1.2	INTEGER	read-write	link control proto rec-num (lcp)
INT nvIpcpconfMaxRec	1.3.6.1.4.1.230.5.16.8.1	INTEGER	read-only	total number of records allowed in database file.
STR nvIpcpconfNbnsadd1	1.3.6.1.4.1.230.5.16.8.3.1.9	DisplayString	read-write	IP address of primary NBNS server
STR nvIpcpconfNbnsadd2	1.3.6.1.4.1.230.5.16.8.3.1.10	DisplayString	read-write	IP address of secondary NBNS server
INT nvIpcpconfNumRec	1.3.6.1.4.1.230.5.16.8.2	INTEGER	read-only	number of records in use.
STR nvIpcpconfProfile	1.3.6.1.4.1.230.5.16.8.3.1.5	DisplayString	read-write	Ipcp Profile Name
INT nvIpcpconfStatus	1.3.6.1.4.1.230.5.16.8.3.1.12	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvIpcpconfTable	1.3.6.1.4.1.230.5.16.8.3		not-accessible	ipcpconf file.
INT nvIpcpconfTest	1.3.6.1.4.1.230.5.16.8.3.1.4	INTEGER	read-write	test mode.
nvIproute	1.3.6.1.4.1.230.5.16.4
nvIprouteEntry	1.3.6.1.4.1.230.5.16.4.3.1		not-accessible	iproute record.
INT nvIprouteIndex	1.3.6.1.4.1.230.5.16.4.3.1.1	INTEGER	read-only	Index of iproute record
STR nvIprouteIpaddr	1.3.6.1.4.1.230.5.16.4.3.1.3	DisplayString	read-write	IP destination address (ipaddr) This field is a 15 byte character string in IP dotted address format.
STR nvIprouteMask	1.3.6.1.4.1.230.5.16.4.3.1.4	DisplayString	read-write	IP destination mask (ipmask) This field is a 15 byte character string in IP dotted address format.
INT nvIprouteMaxRec	1.3.6.1.4.1.230.5.16.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIprouteMetric	1.3.6.1.4.1.230.5.16.4.3.1.6	INTEGER	read-write	Cost of route (metric) Default value is 1.
STR nvIprouteNexthop	1.3.6.1.4.1.230.5.16.4.3.1.5	DisplayString	read-write	Next hop IP address (nexthop) This field is a 15 byte character string in IP dotted address format.
INT nvIprouteNumRec	1.3.6.1.4.1.230.5.16.4.2	INTEGER	read-only	number of records in use.
INT nvIprouteStatus	1.3.6.1.4.1.230.5.16.4.3.1.12	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvIprouteTable	1.3.6.1.4.1.230.5.16.4.3		not-accessible	iproute file.
nvIprtstat	1.3.6.1.4.1.230.5.16.5
STR nvIprtstatDest	1.3.6.1.4.1.230.5.16.5.3.1.2	DisplayString	read-only	Destination address of this route (Dest)
nvIprtstatEntry	1.3.6.1.4.1.230.5.16.5.3.1		not-accessible	iprtstat record.
INT nvIprtstatIndex	1.3.6.1.4.1.230.5.16.5.3.1.1	INTEGER	read-only	Index of iprtstat record
INT nvIprtstatInterface	1.3.6.1.4.1.230.5.16.5.3.1.3	INTEGER	read-only	Interface for route (Interface)
INT nvIprtstatMaxRec	1.3.6.1.4.1.230.5.16.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIprtstatMetric	1.3.6.1.4.1.230.5.16.5.3.1.4	INTEGER	read-only	The routing metric for this route (Metric)
STR nvIprtstatNextHop	1.3.6.1.4.1.230.5.16.5.3.1.5	DisplayString	read-only	The address of the next hop (NextHop)
INT nvIprtstatNumRec	1.3.6.1.4.1.230.5.16.5.2	INTEGER	read-only	number of records in use.
INT nvIprtstatProto	1.3.6.1.4.1.230.5.16.5.3.1.7	INTEGER	read-only	The mechanism via which this route was learned (Proto)
nvIprtstatTable	1.3.6.1.4.1.230.5.16.5.3		not-accessible	iprtstat file.
INT nvIprtstatType	1.3.6.1.4.1.230.5.16.5.3.1.6	INTEGER	read-only	The type of route (Type)
nvIpstat	1.3.6.1.4.1.230.5.16.2
STR nvIpstatDtreset	1.3.6.1.4.1.230.5.16.2.3.1.18	DisplayString	read-only	date & time statistics last reset
nvIpstatEntry	1.3.6.1.4.1.230.5.16.2.3.1		not-accessible	ipstat record.
CTR nvIpstatForwDatas	1.3.6.1.4.1.230.5.16.2.3.1.5	Counter	read-only	Input datagrams forwarded (ForwData) The number of input datagrams for which this entity was not their final IP destination,as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways,this counter will include only those packets which were Source-Routed via this entity,and the Source- Route option processing was successful. Statistic is zeroed at startup time.
CTR nvIpstatFragCrs	1.3.6.1.4.1.230.5.16.2.3.1.17	Counter	read-only	Fragments created (FragCr) The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. Statistic is zeroed at startup time.
CTR nvIpstatFragFails	1.3.6.1.4.1.230.5.16.2.3.1.16	Counter	read-only	Datagrams with fragmentation errors (FragFail) The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be,e.g.,because their Don't Fragment flag was set. Statistic is zeroed at startup time.
CTR nvIpstatFragOKs	1.3.6.1.4.1.230.5.16.2.3.1.15	Counter	read-only	Datagrams successfully fragmented (FragOK) The number of IP datagrams that have been successfully fragmented at this entity. Statistic is zeroed at startup time.
CTR nvIpstatInAdrErrs	1.3.6.1.4.1.230.5.16.2.3.1.4	Counter	read-only	Input datagrams with address errors (InAdrErr) The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g.,0.0.0.0) and addresses of unsupported Classes (e.g.,Class E). For entities which are not IP Gateways and therefore do not forward datagrams,this counter includes datagrams discarded because the destination address was not a local address. Statistic is zeroed at startup time.
INT nvIpstatIndex	1.3.6.1.4.1.230.5.16.2.3.1.1	INTEGER	read-only	Index of ipstat record
CTR nvIpstatInDiscrds	1.3.6.1.4.1.230.5.16.2.3.1.7	Counter	read-only	Input datagrams with buffer errors (InDiscrd) The number of input IP datagrams for which no problems were encountered to prevent their continued processing,but which were discarded (e.g.,for lack of buffer space). Note that this counter does not include any datagrams discarded while waiting re-assembly. Statistic is zeroed at startup time.
CTR nvIpstatInDlvrs	1.3.6.1.4.1.230.5.16.2.3.1.8	Counter	read-only	Input datagrams delivered (InDlvrs) The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). Statistic is zeroed at startup time.
CTR nvIpstatInHdrErrs	1.3.6.1.4.1.230.5.16.2.3.1.3	Counter	read-only	Input datagrams with header errors (InHdrErr) The number of input datagrams discarded due to errors in their IP headers,including bad checksums,version number mismatch,other format errors,time-to-live exceeded,errors discovered in processing their IP options,etc. Statistic is zeroed at startup time.
CTR nvIpstatInRxs	1.3.6.1.4.1.230.5.16.2.3.1.2	Counter	read-only	Input datagrams received (InRx) The total number of input datagrams received from interfaces,including those received in error. Statistic is zeroed at startup time.
INT nvIpstatMaxRec	1.3.6.1.4.1.230.5.16.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIpstatNumRec	1.3.6.1.4.1.230.5.16.2.2	INTEGER	read-only	number of records in use.
CTR nvIpstatOutDiscrds	1.3.6.1.4.1.230.5.16.2.3.1.10	Counter	read-only	Output datagrams with buffer errors (OutDiscrd) The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination,but which were discarded (e.g.,for lack of buffer space). Note that this counter would include datagrams counted in ForwData if any such packets met this (discretionary) discard criterion. Statistic is zeroed at startup time.
CTR nvIpstatOutNoRts	1.3.6.1.4.1.230.5.16.2.3.1.11	Counter	read-only	Output datagrams with address errors (OutNoRts) The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ForwData which meet this `no-route' criterion. Note that this includes any datagrams which a host cannot route because all of its default gateways are down. Statistic is zeroed at startup time.
CTR nvIpstatOutRqsts	1.3.6.1.4.1.230.5.16.2.3.1.9	Counter	read-only	Local datagrams created (OutRqst) The total number of IP datagrams which local IP user protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ForwData. Statistic is zeroed at startup time.
CTR nvIpstatReasmFails	1.3.6.1.4.1.230.5.16.2.3.1.14	Counter	read-only	Datagram reassembly failures (ReasmFail) The number of errors detected by the IP re-assembly algorithm (for whatever reason: timed out,errors,etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can loose track of the number of fragments by combining them as they are received. Statistic is zeroed at startup time.
CTR nvIpstatReasmOKs	1.3.6.1.4.1.230.5.16.2.3.1.13	Counter	read-only	Datagrams successfully reassembled (ReasmOK) The number of IP datagrams successfully reassembled. Statistic is zeroed at startup time.
CTR nvIpstatReasmRqds	1.3.6.1.4.1.230.5.16.2.3.1.12	Counter	read-only	Received IP fragments (ReasmRqd) The number of IP fragments received which needed to be reassembled at this entity. Statistic is zeroed at startup time.
nvIpstatTable	1.3.6.1.4.1.230.5.16.2.3		not-accessible	ipstat file.
CTR nvIpstatUnKnwnPrs	1.3.6.1.4.1.230.5.16.2.3.1.6	Counter	read-only	Input datagrams with protocol errors (UnKnwnPr) The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. Statistic is zeroed at startup time.
nvIptrunk	1.3.6.1.4.1.230.5.16.7
INT nvIptrunkDstiptrnk	1.3.6.1.4.1.230.5.16.7.3.1.5	INTEGER	read-write	destenation lapb link (Dstiptrnk) Default value is 0.
nvIptrunkEntry	1.3.6.1.4.1.230.5.16.7.3.1		not-accessible	iptrunk record.
INT nvIptrunkIndex	1.3.6.1.4.1.230.5.16.7.3.1.1	INTEGER	read-only	Index of iptrunk record
STR nvIptrunkIpaddr	1.3.6.1.4.1.230.5.16.7.3.1.3	DisplayString	read-write	IP destination address (ipaddr) This field is a 15 byte character string in IP dotted address format.
INT nvIptrunkMaxRec	1.3.6.1.4.1.230.5.16.7.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIptrunkNumRec	1.3.6.1.4.1.230.5.16.7.2	INTEGER	read-only	number of records in use.
INT nvIptrunkStatus	1.3.6.1.4.1.230.5.16.7.3.1.9	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvIptrunkTable	1.3.6.1.4.1.230.5.16.7.3		not-accessible	iptrunk file.
nvIpwanmap	1.3.6.1.4.1.230.5.16.3
INT nvIpwanmapBcastcntl	1.3.6.1.4.1.230.5.16.3.3.1.9	INTEGER	read-write	Send internally generated broadcasts (broadcast) This field is a 15 byte character string in IP dotted address format.
INT nvIpwanmapCug	1.3.6.1.4.1.230.5.16.3.3.1.21	INTEGER	read-write	Closed user group number (cug) Default value is 0.
INT nvIpwanmapCugtype	1.3.6.1.4.1.230.5.16.3.3.1.20	INTEGER	read-write	Closed user group type (cugtype) Default value is nocug (0+1).
nvIpwanmapEntry	1.3.6.1.4.1.230.5.16.3.3.1		not-accessible	ipwanmap record.
INT nvIpwanmapFrpvc	1.3.6.1.4.1.230.5.16.3.3.1.24	INTEGER	read-write	Frame Relay PVC record (frpvc) Default value is 0.
INT nvIpwanmapIdnum	1.3.6.1.4.1.230.5.16.3.3.1.27	INTEGER	read-write	PDS 974 stringid of calling addr Default value is 0.
INT nvIpwanmapInactivty	1.3.6.1.4.1.230.5.16.3.3.1.12	INTEGER	read-write	Inactivity timer (inactivty).
INT nvIpwanmapIndex	1.3.6.1.4.1.230.5.16.3.3.1.1	INTEGER	read-only	Index of ipwanmap record
STR nvIpwanmapIpaddr	1.3.6.1.4.1.230.5.16.3.3.1.7	DisplayString	read-write	IP address of local LAN (ipaddr) This field is a 15 byte character string in IP dotted address format.
INT nvIpwanmapIpcp	1.3.6.1.4.1.230.5.16.3.3.1.26	INTEGER	read-write	IPCPCONF record number (ipcp) Default value is 0.
STR nvIpwanmapMask	1.3.6.1.4.1.230.5.16.3.3.1.8	DisplayString	read-write	IP network mask (mask) This field is a 15 byte character string in IP dotted address format.
INT nvIpwanmapMaxRec	1.3.6.1.4.1.230.5.16.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIpwanmapMetric	1.3.6.1.4.1.230.5.16.3.3.1.11	INTEGER	read-write	Cost of route (metric) Default value is 1.
INT nvIpwanmapMtu	1.3.6.1.4.1.230.5.16.3.3.1.10	INTEGER	read-write	Maximum frame length on this interface (mtu) Default value is 1500.
STR nvIpwanmapNetaddr	1.3.6.1.4.1.230.5.16.3.3.1.13	DisplayString	read-write	Called address (netaddr).
INT nvIpwanmapNetprot	1.3.6.1.4.1.230.5.16.3.3.1.25	INTEGER	read-write	Network protocol (netprot) Default value is x25 (0+1).
INT nvIpwanmapNumRec	1.3.6.1.4.1.230.5.16.3.2	INTEGER	read-only	number of records in use.
INT nvIpwanmapPsize	1.3.6.1.4.1.230.5.16.3.3.1.18	INTEGER	read-write	Max packet size (psize) Default value is 8+1.
INT nvIpwanmapPvcid	1.3.6.1.4.1.230.5.16.3.3.1.23	INTEGER	read-write	PVC ID - zero if SVC (pvcid) Default value is 0.
INT nvIpwanmapRevacc	1.3.6.1.4.1.230.5.16.3.3.1.15	INTEGER	read-write	Reverse charging accepted? (revacc) Default value is no (0+1).
INT nvIpwanmapRevcall	1.3.6.1.4.1.230.5.16.3.3.1.16	INTEGER	read-write	Reverse charging flag (revacc) Default value is no (0+1).
INT nvIpwanmapRpoa	1.3.6.1.4.1.230.5.16.3.3.1.22	INTEGER	read-write	RPOA number (rpoa) Default value is 0.
INT nvIpwanmapStatus	1.3.6.1.4.1.230.5.16.3.3.1.36	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvIpwanmapTable	1.3.6.1.4.1.230.5.16.3.3		not-accessible	ipwanmap file.
INT nvIpwanmapTput	1.3.6.1.4.1.230.5.16.3.3.1.17	INTEGER	read-write	Throughput (tput) Default value is link (0+1).
STR nvIpwanmapUserdat	1.3.6.1.4.1.230.5.16.3.3.1.14	DisplayString	read-write	User data (userdat)
INT nvIpwanmapWsize	1.3.6.1.4.1.230.5.16.3.3.1.19	INTEGER	read-write	Max window size (wsize) Default value is 0.
nvIticlass	1.3.6.1.4.1.230.5.6.9
INT nvIticlassAcctng	1.3.6.1.4.1.230.5.6.9.3.1.51	INTEGER	read-write	Accounting
INT nvIticlassAcctsigl	1.3.6.1.4.1.230.5.6.9.3.1.3	INTEGER	read-write	Accounting Service Signal (acctsigl) Default value is 2+1.
INT nvIticlassActonloss	1.3.6.1.4.1.230.5.6.9.3.1.4	INTEGER	read-write	Action on Data Loss (actonloss) Default value is 1+1.
INT nvIticlassBannerid	1.3.6.1.4.1.230.5.6.9.3.1.5	INTEGER	read-write	Connect Banner Identification (bannerid) This parameter indicates the herald message that is to be send to the port upon activation. This value is an index into string storage. Default value is 0.
INT nvIticlassBreaksgnl	1.3.6.1.4.1.230.5.6.9.3.1.6	INTEGER	read-write	BREAK Character Signal Id (breaksgnl)
INT nvIticlassCallingid	1.3.6.1.4.1.230.5.6.9.3.1.50	INTEGER	read-write	What to do with call id.
INT nvIticlassCalmethod	1.3.6.1.4.1.230.5.6.9.3.1.7	INTEGER	read-write	Allowed Calling Method (calmethod) Parameter to control the restriction of outgoing call methods. Default value is 1+1.
INT nvIticlassClasmode	1.3.6.1.4.1.230.5.6.9.3.1.48	INTEGER	read-write	Padding.
INT nvIticlassClasmsgid	1.3.6.1.4.1.230.5.6.9.3.1.8	INTEGER	read-write	Class Info Message Id (clasmsgid) This parameter controls the facility that is used to send a greeting message to users successfully connecting to the PAD. A terminal port will send the message to the terminal while a host port will send it across the virtual call to the user. The value is an index into string storage. If the specified string contains the two consecutive characters '%s' then the first occurance of those two characters will be replaced by a string naming the port. This may be usefull when a user wishes to know exactly what the remote destination port is when the destination port is a member of a hunt group. Default value is 0.
STR nvIticlassClaspaswd	1.3.6.1.4.1.230.5.6.9.3.1.9	DisplayString	read-write	Class Password (claspaswd) This field contains the password associated with this user. When a userid and password are prompted for then the values supplied by the user must match the USERNAME and PASSWORD fields of one of the records in the nvIticlass file. If no match is made then access is denied. If this field is NULL then only the user's name is required and the supplied password is not checked.
STR nvIticlassClassname	1.3.6.1.4.1.230.5.6.9.3.1.2	DisplayString	read-write	Class Name (classname) This field contains a user's name. If a default user id is not specified in the PORT record, ITI will ask the user to enter a User Name. The entered value is matched against the records in this file.
INT nvIticlassCmdtimout	1.3.6.1.4.1.230.5.6.9.3.1.10	INTEGER	read-write	X.28 Command Timeout (cmdtimout) Timeout value (in seconds) when waiting for user to enter a command. If the value is zero,the command timeout facility is disabled. Default value is 60.
INT nvIticlassComfac	1.3.6.1.4.1.230.5.6.9.3.1.53	INTEGER	read-write	Lower or Upper case service signals. lcfac = lower case with fac ucfac = upper case with fac lcnofac = lower case with no fac ucnofac = upper case no fac.
INT nvIticlassCug	1.3.6.1.4.1.230.5.6.9.3.1.11	INTEGER	read-write	Closed User Group Identifier (cug) Default value is 0.
INT nvIticlassDatacmd	1.3.6.1.4.1.230.5.6.9.3.1.12	INTEGER	read-write	Data Command (datacmd) Default value is 0.
INT nvIticlassDefpsze	1.3.6.1.4.1.230.5.6.9.3.1.14	INTEGER	read-write	Default Packet Size (defpsze) This field specifies which packet size to use when packetizing data to be sent accross a virtual circuit. Default value is 7+1.
INT nvIticlassDefwsze	1.3.6.1.4.1.230.5.6.9.3.1.13	INTEGER	read-write	Default Window Size (defwsze) This field specifies the window size to be used when transmitting packets. It is the maximum number packets that can be transmitted before an acknowledgement is received. Default value is 2.
INT nvIticlassDevtype	1.3.6.1.4.1.230.5.6.9.3.1.15	INTEGER	read-write	Device Type (devtype) This field is used to control ITI actions depending upon whether the port is connected to a host or terminal. For example,a terminal interface will recognize Break,while a host interface may have to generate one. Default value is 1+1.
INT nvIticlassDialout	1.3.6.1.4.1.230.5.6.9.3.1.49	INTEGER	read-write	dial-out string
INT nvIticlassDroptimer	1.3.6.1.4.1.230.5.6.9.3.1.47	INTEGER	read-write	length of time before disconnecting a call default 0
nvIticlassEntry	1.3.6.1.4.1.230.5.6.9.3.1		not-accessible	iticlass record.
INT nvIticlassEscchar	1.3.6.1.4.1.230.5.6.9.3.1.44	INTEGER	read-write	escape character use default is 0.
INT nvIticlassExitcmd	1.3.6.1.4.1.230.5.6.9.3.1.16	INTEGER	read-write	Exit Command (exitcmd) Default value is 0.
INT nvIticlassFastsel	1.3.6.1.4.1.230.5.6.9.3.1.17	INTEGER	read-write	Fast Select Calling (fastsel) This field determines whether fast select calls may be placed or received Default value is 4+1.
INT nvIticlassIchrg	1.3.6.1.4.1.230.5.6.9.3.1.18	INTEGER	read-write	Incoming Charging Restriction (ichrg) This field controls the incoming charging options allowed for this session. Normally used on a host interface. Default value is 1+1.
INT nvIticlassInactivty	1.3.6.1.4.1.230.5.6.9.3.1.19	INTEGER	read-write	Data Mode Inactivity Timeout (inactivty) Timeout value (in minutes) when waiting for data transfer after call has been connected. If set to zero then no timeout occurs. Default value is 0.
INT nvIticlassIncbar	1.3.6.1.4.1.230.5.6.9.3.1.20	INTEGER	read-write	Incoming Call Restriction (incbar) This field is used to bar specified incoming calls. Normally used on a host interface. Default value is 2+1.
INT nvIticlassIndex	1.3.6.1.4.1.230.5.6.9.3.1.1	INTEGER	read-only	Index of iticlass record
INT nvIticlassInitcmd	1.3.6.1.4.1.230.5.6.9.3.1.21	INTEGER	read-write	Initial Automatic Command Id (initcmd) Default value is 0.
INT nvIticlassInvclrcmd	1.3.6.1.4.1.230.5.6.9.3.1.45	INTEGER	read-write	clear Command (initcmd) Default value is 0.
INT nvIticlassInvclrtim	1.3.6.1.4.1.230.5.6.9.3.1.52	INTEGER	read-write	Timeout for Invitation to Clear
INT nvIticlassMaskstrng	1.3.6.1.4.1.230.5.6.9.3.1.22	INTEGER	read-write	string containing echo mask sequence Default value is 0. string MUST be defined BEFORE it can be referenced in this field.
INT nvIticlassMaxpsze	1.3.6.1.4.1.230.5.6.9.3.1.23	INTEGER	read-write	Maximum Packet Size (maxpsze) This field specifies which packet size to use when packetizing data to be sent accross a virtual circuit. Default value is 7+1.
INT nvIticlassMaxRec	1.3.6.1.4.1.230.5.6.9.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIticlassMaxwsze	1.3.6.1.4.1.230.5.6.9.3.1.24	INTEGER	read-write	Maximum Window Size (maxwsze) This field specifies the window size to be used when transmitting packets. It is the maximum number packets that can be transmitted before an acknowledgement is received. Default value is 2.
INT nvIticlassNumRec	1.3.6.1.4.1.230.5.6.9.2	INTEGER	read-only	number of records in use.
INT nvIticlassOchrg	1.3.6.1.4.1.230.5.6.9.3.1.25	INTEGER	read-write	Outgoing Charging Restriction (ochrg) This field controls the outgoing charging options permitted during this session. Normally used on a terminal interface. Default value is 1+1.
INT nvIticlassOutbar	1.3.6.1.4.1.230.5.6.9.3.1.26	INTEGER	read-write	Outgoing Call Restriction (outbar) This field is used to bar specified outgoing calls. Normally used on a terminal interface. Default value is 3+1.
INT nvIticlassPrefixid	1.3.6.1.4.1.230.5.6.9.3.1.27	INTEGER	read-write	Service Signal Prefix Id (prefixid) This parameter indicates the prefix string that is prefixed to all replies from ITI. This value is an index into string storage. Default value is 0.
STR nvIticlassProfile	1.3.6.1.4.1.230.5.6.9.3.1.28	DisplayString	read-write	Initial X.3 Parameter Profile (profile) This field specifies which X.3 parameter profile is to be used for the session. The terminal parameter table is initialized with the specified values. Users are free to change their own parameters. Whenever a session is terminated,via a timeout,a broken connection or a cleared call,the X.3 profile is reloaded for the user when the Network Processor is next accessed. This facility is used by both terminal and host interfaces to set up initial parameters. This field is an index into the ITIPROF file.
INT nvIticlassPromptid	1.3.6.1.4.1.230.5.6.9.3.1.29	INTEGER	read-write	X.28 Prompt Identification (promptid) This parameter indicates the prompt to be used to solicit a user response. This value is an index into string storage. Default value is 0.
INT nvIticlassPvcid	1.3.6.1.4.1.230.5.6.9.3.1.30	INTEGER	read-write	PVC Identifier (pvcid) This field is used to select a network provided permanent virtual circuit for the session.
INT nvIticlassRejectid	1.3.6.1.4.1.230.5.6.9.3.1.31	INTEGER	read-write	Reject Service Message Id (rejectid) This field controls the facility that is used to send a service refusal message to the user and to disconnect the call. An example of use would be on a host pad when the host is down. A terminal port will send the message to the terminal and clear the physical connection. A host port will send the message across the virtual call to the user, and follow it by an invitation to clear. The value is an index into string storage. Default value is 0.
INT nvIticlassRpoacode	1.3.6.1.4.1.230.5.6.9.3.1.32	INTEGER	read-write	RPOA Code (rpoacode) Default value is 0.
INT nvIticlassRpoatype	1.3.6.1.4.1.230.5.6.9.3.1.33	INTEGER	read-write	RPOA Type (rpoatype) Default value is 2+1.
INT nvIticlassSecurity	1.3.6.1.4.1.230.5.6.9.3.1.34	INTEGER	read-write	Access Method (security) Default value is 1+1.
INT nvIticlassStatus	1.3.6.1.4.1.230.5.6.9.3.1.43	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvIticlassTable	1.3.6.1.4.1.230.5.6.9.3		not-accessible	iticlass file.
INT nvIticlassTermtype	1.3.6.1.4.1.230.5.6.9.3.1.35	INTEGER	read-write	Terminal Type (termtype) Default value is 1+1.
INT nvIticlassTidprompt	1.3.6.1.4.1.230.5.6.9.3.1.42	INTEGER	read-write
INT nvIticlassX28type	1.3.6.1.4.1.230.5.6.9.3.1.36	INTEGER	read-write	X.28 Command Set (x28type) Default value is 1+1.
INT nvIticlassX29mskstr	1.3.6.1.4.1.230.5.6.9.3.1.46	INTEGER	read-write
INT nvIticlassX3type	1.3.6.1.4.1.230.5.6.9.3.1.37	INTEGER	read-write	X.3 Parameter Profile Type (x3type) Many implementations of X.3 may be found in today's public data networks. A parameter on one network may mean something different on another one. Or the allowable values may be different. This field selects which parameter standard is to be used in the X.28 (user interface) and X.29 (remote computer) interfaces. It is important that a user know and conform to the parameter standard being used by a remote PAD. Otherwise commands sent from the remote PAD to set local parameters may not be interpreted properly. Default value is 1+1.
INT nvIticlassXoffin	1.3.6.1.4.1.230.5.6.9.3.1.38	INTEGER	read-write	Input XOFF Character (xoffin) Second user selectable XOFF charcter. This character functions in an input only capacity and is not output by the PAD as an XOFF chaacter. Default value is 19.
INT nvIticlassXoffout	1.3.6.1.4.1.230.5.6.9.3.1.39	INTEGER	read-write	Output XOFF Character (xoffout) User selectable XOFF character. Default value is 19.
INT nvIticlassXonin	1.3.6.1.4.1.230.5.6.9.3.1.40	INTEGER	read-write	Input XON Character (xonin) Second user selectable XON charcter. This character functions in an input only capacity and is not output by the PAD as an XON character. Default value is 17.
INT nvIticlassXonout	1.3.6.1.4.1.230.5.6.9.3.1.41	INTEGER	read-write	Output XON Character (xonout) User selectable XON character. Default value is 17.
nvIticmd	1.3.6.1.4.1.230.5.6.10
STR nvIticmdClass	1.3.6.1.4.1.230.5.6.10.3.1.3	DisplayString	read-write	Class of Service (class) Name of class that owns command.
STR nvIticmdCommand	1.3.6.1.4.1.230.5.6.10.3.1.2	DisplayString	read-write	Command Mnemonic (command) Command name,this string is entered by the user and is matched against entries in this file. If successful,the matched string is taken as user input and processed.
nvIticmdEntry	1.3.6.1.4.1.230.5.6.10.3.1		not-accessible	iticmd record.
INT nvIticmdIndex	1.3.6.1.4.1.230.5.6.10.3.1.1	INTEGER	read-only	Index of iticmd record
INT nvIticmdMaxRec	1.3.6.1.4.1.230.5.6.10.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIticmdNumRec	1.3.6.1.4.1.230.5.6.10.2	INTEGER	read-only	number of records in use.
INT nvIticmdStatus	1.3.6.1.4.1.230.5.6.10.3.1.5	INTEGER	read-write
INT nvIticmdStringid	1.3.6.1.4.1.230.5.6.10.3.1.4	INTEGER	read-write	Full Command Name Id (stringid) Index into string storage for replacement value.
nvIticmdTable	1.3.6.1.4.1.230.5.6.10.3		not-accessible	iticmd file.
nvIticonf	1.3.6.1.4.1.230.5.6.11
INT nvIticonfBroadcast	1.3.6.1.4.1.230.5.6.11.3.1.3	INTEGER	read-write	Broadcast Message Id (broadcast) This field identifies a string which is to be broadcast to a port following a service request but before security checking. Replacing the nvIticonf record will cause the message to be broadcast to all active iti ports that have service signals enabled.
INT nvIticonfConfigstr	1.3.6.1.4.1.230.5.6.11.3.1.7	INTEGER	read-write	CONSAT facility mapping string.
INT nvIticonfDnic	1.3.6.1.4.1.230.5.6.11.3.1.6	INTEGER	read-write	Data Network Identification Code (dnic) DNIC number when calmethod=special in nvIticlass file.
nvIticonfEntry	1.3.6.1.4.1.230.5.6.11.3.1		not-accessible	iticonf record.
INT nvIticonfIndex	1.3.6.1.4.1.230.5.6.11.3.1.1	INTEGER	read-only	Index of iticonf record
INT nvIticonfItiswitch	1.3.6.1.4.1.230.5.6.11.3.1.4	INTEGER	read-write	ITI Switch (itiswitch) This field will be used to tell NBUS whether outgoing calls can be looped back (ITI to ITI calls allowed) Default value is ysr (1+1).
INT nvIticonfMaxRec	1.3.6.1.4.1.230.5.6.11.1	INTEGER	read-only	total number of records allowed in database file.
INT nvIticonfNumcopy	1.3.6.1.4.1.230.5.6.11.3.1.2	INTEGER	read-write	Number of Simultaneous Copies (numcopy) This field specifies how many ITI ports may be copying network data at one time. Default value is 4.
INT nvIticonfNumRec	1.3.6.1.4.1.230.5.6.11.2	INTEGER	read-only	number of records in use.
STR nvIticonfPadaddr	1.3.6.1.4.1.230.5.6.11.3.1.5	DisplayString	read-write	PAD Address Field (padaddr)
nvIticonfTable	1.3.6.1.4.1.230.5.6.11.3		not-accessible	iticonf file.
INT nvIticonfV120p11	1.3.6.1.4.1.230.5.6.11.3.1.10	INTEGER	read-write	64k 1, p11 for v.120 set for 64000 urate 2, p11 for v.120 from user rate in ISDN
INT nvIticonfValserver	1.3.6.1.4.1.230.5.6.11.3.1.8	INTEGER	read-write	address of validation server Default value is 0.
nvIticstat	1.3.6.1.4.1.230.5.6.1
CTR nvIticstatAvgtime	1.3.6.1.4.1.230.5.6.1.3.1.7	Counter	read-only	Average number of seconds per call.
STR nvIticstatClassname	1.3.6.1.4.1.230.5.6.1.3.1.2	DisplayString	read-only	Name of class. This field identifies which class the statistics in this record pertain to.
CTR nvIticstatCurcalls	1.3.6.1.4.1.230.5.6.1.3.1.6	Counter	read-only	Current number of calls.
STR nvIticstatDtreset	1.3.6.1.4.1.230.5.6.1.3.1.10	DisplayString	read-only	date & time statistics last reset
nvIticstatEntry	1.3.6.1.4.1.230.5.6.1.3.1		not-accessible	iticstat record.
CTR nvIticstatFailneg	1.3.6.1.4.1.230.5.6.1.3.1.18	Counter	read-only	Calls disconnected during modem negotiation.
INT nvIticstatIndex	1.3.6.1.4.1.230.5.6.1.3.1.1	INTEGER	read-only	Index of iticstat record
CTR nvIticstatLoscarcip	1.3.6.1.4.1.230.5.6.1.3.1.21	Counter	read-only	Calls disconnected during connection phase.
CTR nvIticstatLoscardat	1.3.6.1.4.1.230.5.6.1.3.1.22	Counter	read-only	Calls disconnected during data transfer.
CTR nvIticstatLoscarsu	1.3.6.1.4.1.230.5.6.1.3.1.20	Counter	read-only	Calls disconnected during setup phase.
CTR nvIticstatMaxcalls	1.3.6.1.4.1.230.5.6.1.3.1.8	Counter	read-only	Maximum concurrent calls.
CTR nvIticstatMaxIncom	1.3.6.1.4.1.230.5.6.1.3.1.27	Counter	read-only	Maximum number of Incoming Calls.
CTR nvIticstatMaxOutgo	1.3.6.1.4.1.230.5.6.1.3.1.28	Counter	read-only	Maximum number of Outgoing Calls.
INT nvIticstatMaxRec	1.3.6.1.4.1.230.5.6.1.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvIticstatN1200bd	1.3.6.1.4.1.230.5.6.1.3.1.13	Counter	read-only	1200 up to 2400 baud calls received.
CTR nvIticstatN14400bd	1.3.6.1.4.1.230.5.6.1.3.1.16	Counter	read-only	14400 up to 28800 baud calls received.
CTR nvIticstatN2400bd	1.3.6.1.4.1.230.5.6.1.3.1.14	Counter	read-only	2400 up to 9600 baud calls received.
CTR nvIticstatN28800bd	1.3.6.1.4.1.230.5.6.1.3.1.17	Counter	read-only	28800 baud calls and above received.
CTR nvIticstatN300bd	1.3.6.1.4.1.230.5.6.1.3.1.12	Counter	read-only	300 up to 1200 baud calls received.
CTR nvIticstatN9600bd	1.3.6.1.4.1.230.5.6.1.3.1.15	Counter	read-only	9600 up to 14400 baud calls received.
CTR nvIticstatNcurIncom	1.3.6.1.4.1.230.5.6.1.3.1.25	Counter	read-only	Number of Current Incoming Calls.
CTR nvIticstatNcurOutgo	1.3.6.1.4.1.230.5.6.1.3.1.26	Counter	read-only	Number of Current Outgoing Calls.
CTR nvIticstatNnccs	1.3.6.1.4.1.230.5.6.1.3.1.3	Counter	read-only	number of network connection commands. Total number of network originated calls to this class. Statistic is zeroed at startup time.
CTR nvIticstatNncr	1.3.6.1.4.1.230.5.6.1.3.1.31	Counter	read-only	number of network connection commands. Count of virtual circuits initiated from ITI port.
CTR nvIticstatNnfails	1.3.6.1.4.1.230.5.6.1.3.1.4	Counter	read-only	number of network connection failures. Total number of network connection commands that failed. Statistic is zeroed at startup time.
CTR nvIticstatNpassfails	1.3.6.1.4.1.230.5.6.1.3.1.5	Counter	read-only	number of password failures. Total number of password failures for this class. Statistic is zeroed at startup time.
INT nvIticstatNumcalls	1.3.6.1.4.1.230.5.6.1.3.1.9	INTEGER	read-only	Total number of successful modem connctions.
CTR nvIticstatNumIncom	1.3.6.1.4.1.230.5.6.1.3.1.29	Counter	read-only	Number of Successful Incoming Calls.
CTR nvIticstatNumOutgo	1.3.6.1.4.1.230.5.6.1.3.1.30	Counter	read-only	Number of Successful Outgoing Calls.
INT nvIticstatNumRec	1.3.6.1.4.1.230.5.6.1.2	INTEGER	read-only	number of records in use.
nvIticstatTable	1.3.6.1.4.1.230.5.6.1.3		not-accessible	iticstat file.
CTR nvIticstatTcalls	1.3.6.1.4.1.230.5.6.1.3.1.11	Counter	read-only	Total number of hostcalls.
CTR nvIticstatTrmdsccip	1.3.6.1.4.1.230.5.6.1.3.1.24	Counter	read-only	Calls disconnected by terminal during modem negotiation.
CTR nvIticstatTrmdscdat	1.3.6.1.4.1.230.5.6.1.3.1.19	Counter	read-only	Calls disconnected by terminal during data transfer.
CTR nvIticstatTrmdscsu	1.3.6.1.4.1.230.5.6.1.3.1.23	Counter	read-only	Calls disconnected by terminal during setup.
nvItimap	1.3.6.1.4.1.230.5.6.12
STR nvItimapClass	1.3.6.1.4.1.230.5.6.12.3.1.4	DisplayString	read-write	Class of Port Assignment (class) This field indicates which ITI 'user' is associated with the network address and call user data. If the PORT field in this record is NULL then the actual port is located by processing the itihunt file.
nvItimapEntry	1.3.6.1.4.1.230.5.6.12.3.1		not-accessible	itimap record.
INT nvItimapIndex	1.3.6.1.4.1.230.5.6.12.3.1.1	INTEGER	read-only	Index of itimap record
INT nvItimapMaxRec	1.3.6.1.4.1.230.5.6.12.1	INTEGER	read-only	total number of records allowed in database file.
STR nvItimapNetaddr	1.3.6.1.4.1.230.5.6.12.3.1.2	DisplayString	read-write	Network X.121 Address (netaddr) This field contains the pattern against which the incoming network address is matched.
INT nvItimapNumRec	1.3.6.1.4.1.230.5.6.12.2	INTEGER	read-only	number of records in use.
INT nvItimapStatus	1.3.6.1.4.1.230.5.6.12.3.1.5	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvItimapTable	1.3.6.1.4.1.230.5.6.12.3		not-accessible	itimap file.
STR nvItimapUserdata	1.3.6.1.4.1.230.5.6.12.3.1.3	DisplayString	read-write	User Data (userdata) This field contains the pattern against which the associated call user data is matched.
nvItiport	1.3.6.1.4.1.230.5.6.16
INT nvItiportEnable	1.3.6.1.4.1.230.5.6.16.3.1.3	INTEGER	read-write	ndicates whether port is enabled.
nvItiportEntry	1.3.6.1.4.1.230.5.6.16.3.1		not-accessible	itiport record.
INT nvItiportFclevel	1.3.6.1.4.1.230.5.6.16.3.1.11	INTEGER	read-write	Buffer space left which causes flow control.
INT nvItiportIndex	1.3.6.1.4.1.230.5.6.16.3.1.1	INTEGER	read-only	Index of itiport file.
STR nvItiportIticlass	1.3.6.1.4.1.230.5.6.16.3.1.5	DisplayString	read-write	Class of Service associated with ITI port.
INT nvItiportMaxbspace	1.3.6.1.4.1.230.5.6.16.3.1.10	INTEGER	read-write	Maximum preallocated buffer space.
INT nvItiportMaxRec	1.3.6.1.4.1.230.5.6.16.1	INTEGER	read-only	total number of records allowed in database file.
INT nvItiportMinbspace	1.3.6.1.4.1.230.5.6.16.3.1.9	INTEGER	read-write	Modem Train timer.
INT nvItiportMode	1.3.6.1.4.1.230.5.6.16.3.1.12	INTEGER	read-write	Port mode
STR nvItiportName	1.3.6.1.4.1.230.5.6.16.3.1.2	DisplayString	read-only	Name of ITI instance.
INT nvItiportNumRec	1.3.6.1.4.1.230.5.6.16.2	INTEGER	read-only	number of records in use.
STR nvItiportPortname	1.3.6.1.4.1.230.5.6.16.3.1.7	DisplayString	read-write	Name of physical port or Device Usage Group.
STR nvItiportRsrcpool	1.3.6.1.4.1.230.5.6.16.3.1.6	DisplayString	read-write	Name of Resource Pool.
nvItiportTable	1.3.6.1.4.1.230.5.6.16.3		not-accessible	itiport file.
INT nvItiportTimer0	1.3.6.1.4.1.230.5.6.16.3.1.13	INTEGER	read-write	TID timeout.
INT nvItiportTimer1	1.3.6.1.4.1.230.5.6.16.3.1.8	INTEGER	read-write	TID timeout.
INT nvItiportTimer2	1.3.6.1.4.1.230.5.6.16.3.1.14	INTEGER	read-write	TID timeout.
nvItiprof	1.3.6.1.4.1.230.5.6.13
nvItiprofEntry	1.3.6.1.4.1.230.5.6.13.3.1		not-accessible	itiprof record.
INT nvItiprofIndex	1.3.6.1.4.1.230.5.6.13.3.1.1	INTEGER	read-only	Index of itiprof record
INT nvItiprofMaxRec	1.3.6.1.4.1.230.5.6.13.1	INTEGER	read-only	total number of records allowed in database file.
STR nvItiprofName	1.3.6.1.4.1.230.5.6.13.3.1.2	DisplayString	read-write	Profile Name (name) Name of profile. Used by ITI 'prof' command to locate specified record.
INT nvItiprofNumRec	1.3.6.1.4.1.230.5.6.13.2	INTEGER	read-only	number of records in use.
INT nvItiprofP1	1.3.6.1.4.1.230.5.6.13.3.1.3	INTEGER	read-write	PAD Recall Character (p1) This parameter indicates whether or not the transmission of a DLE character (ASCII value of 16.) from the terminal to the PAD is recognized as an escape from the data transfer state. If so,transmission of DLE will cause the virtual call to be suspended, allowing the terminal user to send commands to the PAD. (0) = No escape allowed (1) = Escape allowed Default value is 1.
INT nvItiprofP10	1.3.6.1.4.1.230.5.6.13.3.1.12	INTEGER	read-write	Line Length (p10) This parameter indicates the maximum number of printable characters that can be displayed on the terminal before the PAD must be sent a format effector (ie. CR LF). This causes data to be output on the next line on the terminal. (0) = No line folding (1-255) = Number of characters per line Default value is 80.
INT nvItiprofP11	1.3.6.1.4.1.230.5.6.13.3.1.13	INTEGER	read-write	Transmission Speed (Read Only) (p11) This parameter is set by the PAD as the result of transmission speed detection if the terminal access is an autobaud port. When a port with fixed speed is used,this parameter is set during PAD configuration,based on the pre-configured value. (0) = 110 bps (1) = 134.5 bps (2) = 300 bps (3) = 1200 bps (4) = 600 bps (5) = 75 bps (6) = 150 bps (7) = 1800 bps (8) = 200 bps (9) = 100 bps (10) = 50 bps (11) = 75/1200 (12) = 2400 (13) = 4800 (14) = 9600
INT nvItiprofP12	1.3.6.1.4.1.230.5.6.13.3.1.14	INTEGER	read-write	PAD Flow Control (p12) This parameter enables the terminal to indicate to the PAD that the terminal cannot receive any more data. When this parameter is set to 1,the terminal user can request that the PAD stop sending data by transmitting a DC3 character. The PAD then suspends transmission of data until a DC1 character is received. This feature allows a display terminal user to indicate when the PAD should suspend the scrolling of terminal output,so that it can be viewed. Then the output can be restarted. (0) = No flow control (1) = Flow control Default value is 1.
INT nvItiprofP13	1.3.6.1.4.1.230.5.6.13.3.1.15	INTEGER	read-write	Line Feed Insertion (p13) This parameter specifies when the PAD should insert Linefeed upon receipt of carriage return from the terminal or destination. As the parameter value is bit-encoded,any combination is permissible. (0) = No linefeed insertion (1) = Insert after carriage return to terminal (2) = Insert in data stream after carriage return from terminal (4) = Insert linefeed after echo of carriage return to terminal Default value is 4.
INT nvItiprofP14	1.3.6.1.4.1.230.5.6.13.3.1.16	INTEGER	read-write	Line Feed Padding (p14) This parameter provides for the automatic insertion by the PAD of padding characters or time delays after occurrence of a linefeed character. (0) = No padding (1-255) = Padding after linefeed Default value is 0.
INT nvItiprofP15	1.3.6.1.4.1.230.5.6.13.3.1.17	INTEGER	read-write	Editing Enable/Disable (p15) This parameter sets character delete,line delete,and line display actions in the data transfer state. Editing is always available in the command state. (0) = No editing (1) = Editing enabled (data state) Default value is 1.
INT nvItiprofP16	1.3.6.1.4.1.230.5.6.13.3.1.18	INTEGER	read-write	Character Delete Character (p16) This parameter specifies the ASCII character to be used as a 'character delete' character for local editing by the PAD. (0) = No delete character Default value is 8.
INT nvItiprofP17	1.3.6.1.4.1.230.5.6.13.3.1.19	INTEGER	read-write	Line Delete Character (p17) This parameter specifies the ASCII character to be used as a 'line delete' character for local editing by the PAD. (0) = No line delete Default value is 24.
INT nvItiprofP18	1.3.6.1.4.1.230.5.6.13.3.1.20	INTEGER	read-write	Line Display Character (p18) This parameter specifies the ASCII character to be used as a 'line redisplay' character for local editing by the PAD. (0) = No line redisplay. Default value is 18.
INT nvItiprofP19	1.3.6.1.4.1.230.5.6.13.3.1.21	INTEGER	read-write	Service Signal Editing (p19) (0) = None (1) = Printing terminal edit (2) = CRT terminal editing Default value is 2.
INT nvItiprofP2	1.3.6.1.4.1.230.5.6.13.3.1.4	INTEGER	read-write	Echo Enable/Disable (p2) This parameter indicates to the PAD whether or not the terminal input data is to be echoed. If so,characters typed in from the terminal keyboard will be transmitted back to the terminal as well as being interpreted by the PAD. Transmission costs can be reduced by having the PAD echo characters rather than having a remote host doing the echoing. (0) = No echo (1) = Echo Default value is 1.
INT nvItiprofP20	1.3.6.1.4.1.230.5.6.13.3.1.22	INTEGER	read-write	Echo Mask (p20) This parameter specifies which characters are not echoed to the device (when p2 is set to 1). (0) = No mask (echo all) (1) = No echo CR (2) = No echo LF (4) = No echo VT,HT,FF (8) = No echo BEL,BS (16) = No echo ESC,ENQ (32) = No echo ACK,NAK,STX,SOH,EOT,ETX,ETB (64) = No echo of parameters 16,17,18 (128) = No echo of control characters not named above Default value is 6.
INT nvItiprofP21	1.3.6.1.4.1.230.5.6.13.3.1.23	INTEGER	read-write	Parity Treatment (p21) This parameter specifies whether or not the PAD should detect,check and generate parity. (0) = No parity detection or generation (1) = Parity checking and PAD handles any parity errors (2) = Parity generation,PAD sets the parity bit for each ASCII character. Default value is 3.
INT nvItiprofP22	1.3.6.1.4.1.230.5.6.13.3.1.24	INTEGER	read-write	Page Wait (p22) This parameter specifies the number of lines (line-feeds) that will be sent to the attached device before output is halted. Output is subsequently resumed after an XON character or any packetizing character is received from the device. (0) = No page wait enabled (1-255) = Number of lines output before page wait condition Default value is 23.
INT nvItiprofP23	1.3.6.1.4.1.230.5.6.13.3.1.25	INTEGER	read-write	First Extra Forwarding Character (p23) This parameter allow the definition of an additional data forwarding signal. This signal is in addition to those specified by parameters 3 and 4. (0) = No extra character (1-127) = ASCII code of character Default value is 0.
INT nvItiprofP24	1.3.6.1.4.1.230.5.6.13.3.1.26	INTEGER	read-write	Second Extra Forwarding Character (p24) This parameter allows the definition of an additional data forwarding signal. This signal is in addition to those characters specified by parameter 3 and 4. (0) = No extra character (1-127) = ASCII code of character Default value is 0.
INT nvItiprofP25	1.3.6.1.4.1.230.5.6.13.3.1.27	INTEGER	read-write	Output Pending Timer (p25) This parameter specifies the length of time,if any,that terminal output will be blocked by terminal input. (0) = No output pending timer. That is,output is not blocked by input (such as in half-duplex transmission). (1-255) = Delay in seconds Default value is 1.
INT nvItiprofP26	1.3.6.1.4.1.230.5.6.13.3.1.28	INTEGER	read-write	Interval Timer (p26) Maximum time,in 1/20 seconds,between transmission of packets. Default value is 0.
INT nvItiprofP27	1.3.6.1.4.1.230.5.6.13.3.1.29	INTEGER	read-write	Horizontal Tab Padding (p27) Number of nulls to output after a TAB. Default value is 0.
INT nvItiprofP28	1.3.6.1.4.1.230.5.6.13.3.1.30	INTEGER	read-write	XON Character to PAD (p28) Default value is 0.
INT nvItiprofP29	1.3.6.1.4.1.230.5.6.13.3.1.31	INTEGER	read-write	XOFF Character to PAD (p29) Default value is 0.
INT nvItiprofP3	1.3.6.1.4.1.230.5.6.13.3.1.5	INTEGER	read-write	Packet Forwarding Characters (p3) This parameter indicates to the PAD the set of terminal generated characters that will cause data to be forwarded to the destination. When a data forwarding signal is received then all buffered data is assembled into a packet and sent to the destination. (0) = No signals (2) = CR (6) = CR,ESC,BEL,ENQ,ACK (18) = CR,EOT,ETX (126) = all control characters (ASCII values from 1. to 31.) and DEL Default value is 2.
INT nvItiprofP30	1.3.6.1.4.1.230.5.6.13.3.1.32	INTEGER	read-write	XON Character to Device (p30) Default value is 0.
INT nvItiprofP31	1.3.6.1.4.1.230.5.6.13.3.1.33	INTEGER	read-write	XOFF Character to Device (p31) Default value is 0.
INT nvItiprofP32	1.3.6.1.4.1.230.5.6.13.3.1.34	INTEGER	read-write	Packet Forward on Character Count (p32) Default value is 0.
INT nvItiprofP33	1.3.6.1.4.1.230.5.6.13.3.1.35	INTEGER	read-write	CONSAT parameter 101 (TAB echo) Default value is 0.
INT nvItiprofP34	1.3.6.1.4.1.230.5.6.13.3.1.36	INTEGER	read-write	CONSAT parameter 102 (TAB expansion) Default value is 0.
INT nvItiprofP35	1.3.6.1.4.1.230.5.6.13.3.1.37	INTEGER	read-write	CONSAT parameter 103 (BREAK key) Default value is 0.
INT nvItiprofP4	1.3.6.1.4.1.230.5.6.13.3.1.6	INTEGER	read-write	Forwarding Idle Timer (p4) This parameter indicates to the PAD whether data forwarding is to be based on timeouts. If so,then the value of the parameter specifies the time limit imposed on the buffering of data characters. Each received data character will reset the timer until eventually a pause in the character stream will allow the timer to expire and all buffered data will be forwarded. (0) = No timer (1-255) = Indicates the value of the delay in twentieths of a second. Default value is 0.
INT nvItiprofP5	1.3.6.1.4.1.230.5.6.13.3.1.7	INTEGER	read-write	Device Flow Control (p5) This parameter indicates whether the terminal will respond to flow control. If so,then this will allow the PAD to stop (by sending an XOFF character) and start (by sending an XON character) transmission from the terminal so that the PAD can pace the terminal. Flow control using modem signals is not supported. (0) = No auxiliary device control (1) = xon/xoff flow control (data transfer) Default value is 1.
INT nvItiprofP6	1.3.6.1.4.1.230.5.6.13.3.1.8	INTEGER	read-write	Service Signal Control (p6) This parameter indicates to the PAD whether or not network generated messages are to be transmitted to the terminal. (0) = No messages sent (1) = Send service messages (4) = Send prompts only Default value is 5.
INT nvItiprofP7	1.3.6.1.4.1.230.5.6.13.3.1.9	INTEGER	read-write	Device BREAK Action (p7) This parameter is used to indicate how the PAD should process a BREAK signal that is received from the terminal while the terminal is in data transfer state. (0) = Nothing (1) = Send interrupt (2) = Send reset (8) = Escape from data state (21) = Discard output,send interrupt and indication of break Default value is 21.
INT nvItiprofP8	1.3.6.1.4.1.230.5.6.13.3.1.10	INTEGER	read-write	Output Discard (p8) This parameter is used in conjunction with Parameter 7. Depending upon the BREAK procedure selected,this parameter may be set by the PAD when the terminal user requests that terminal data be discarded. This parameter must then be reset by the destination to allow normal delivery. The PAD will discard all packets destined for the terminal from the time the PAD sets this parameter (ie. BREAK) and the time the parameter is reset by the destination. This feature can be used,for example,to allow users to terminate lengthy outputs to terminals by pressing BREAK. (0) = Normal delivery (1) = Discard output Default value is 0.
INT nvItiprofP9	1.3.6.1.4.1.230.5.6.13.3.1.11	INTEGER	read-write	Carriage Return Padding (p9) This parameter specifies the number of padding characters to be inserted by the PAD following a carriage return transmitted to the terminal. This would allow mechanical actions (such as type-ball returns) to be completed before more data is to be output. (0) = No padding (1-255) = Number of pads to be inserted Default value is 4.
INT nvItiprofStatus	1.3.6.1.4.1.230.5.6.13.3.1.38	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvItiprofTable	1.3.6.1.4.1.230.5.6.13.3		not-accessible	itiprof file.
nvItipstat	1.3.6.1.4.1.230.5.6.2
STR nvItipstatAcct	1.3.6.1.4.1.230.5.6.2.3.1.4	DisplayString	read-only	accounting id.
STR nvItipstatClassname	1.3.6.1.4.1.230.5.6.2.3.1.5	DisplayString	read-only	iti class: Current user class using this port. NOTE: Order of the following fields corresponds to subset of NSCC structure. The code uses block copies for these fields and assumes the above condition is always true.
INT nvItipstatCug	1.3.6.1.4.1.230.5.6.2.3.1.15	INTEGER	read-only	cug: Closed group identifier. Valid only if previous flag is true.
INT nvItipstatCugtype	1.3.6.1.4.1.230.5.6.2.3.1.14	INTEGER	read-only	cug type: Type of closed user group call.
STR nvItipstatDstadr	1.3.6.1.4.1.230.5.6.2.3.1.7	DisplayString	read-only	destination address: Destination network address.
STR nvItipstatDtreset	1.3.6.1.4.1.230.5.6.2.3.1.48	DisplayString	read-only	date & time statistics last reset
nvItipstatEntry	1.3.6.1.4.1.230.5.6.2.3.1		not-accessible	itipstat record.
INT nvItipstatFast	1.3.6.1.4.1.230.5.6.2.3.1.19	INTEGER	read-only	fast select: Type of fast select.
STR nvItipstatId	1.3.6.1.4.1.230.5.6.2.3.1.49	DisplayString	read-only	Address of ITI control block.
INT nvItipstatIndex	1.3.6.1.4.1.230.5.6.2.3.1.1	INTEGER	read-only	Index of itipstat
INT nvItipstatMaxRec	1.3.6.1.4.1.230.5.6.2.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvItipstatNcrxpaks	1.3.6.1.4.1.230.5.6.2.3.1.41	Counter	read-only	number of current received packets (from network). Number of packets received from the network during current terminal session. Statistic is zeroed at startup time.
CTR nvItipstatNcrxresets	1.3.6.1.4.1.230.5.6.2.3.1.43	Counter	read-only	number of current received resets. Number of resets received during current terminal session. Statistic is zeroed at startup time.
CTR nvItipstatNctxpaks	1.3.6.1.4.1.230.5.6.2.3.1.40	Counter	read-only	number of current transmitted packets (to network). Number of packets send over the network during current terminal session. Statistic is zeroed at startup time.
CTR nvItipstatNctxresets	1.3.6.1.4.1.230.5.6.2.3.1.42	Counter	read-only	number of current transmitted resets. Number of resets originated during current terminal session. Statistic is zeroed at startup time.
INT nvItipstatNdcode	1.3.6.1.4.1.230.5.6.2.3.1.21	INTEGER	read-only	network disconnect code. Value of the last network disconnnect code.
INT nvItipstatNddiag	1.3.6.1.4.1.230.5.6.2.3.1.22	INTEGER	read-only	network diag code: Value of the last network diagnostic code.
INT nvItipstatNdorigin	1.3.6.1.4.1.230.5.6.2.3.1.23	INTEGER	read-only	disconnect origin: Whether disconnect was local or remote directive.
CTR nvItipstatNinputs	1.3.6.1.4.1.230.5.6.2.3.1.44	Counter	read-only	number of input characters. Statistic is zeroed at startup time.
CTR nvItipstatNnccs	1.3.6.1.4.1.230.5.6.2.3.1.34	Counter	read-only	number of network connection cmds. Count of service requests received from the network. Statistic is zeroed at startup time.
CTR nvItipstatNncr	1.3.6.1.4.1.230.5.6.2.3.1.52	Counter	read-only	Number of network connection responses. Count of virtual circuits initiated from ITI port.
CTR nvItipstatNnfails	1.3.6.1.4.1.230.5.6.2.3.1.35	Counter	read-only	number of network connection fails. Count of network call failures. Statistic is zeroed at startup time.
CTR nvItipstatNoutputs	1.3.6.1.4.1.230.5.6.2.3.1.45	Counter	read-only	number of output characters. Statistic is zeroed at startup time.
INT nvItipstatNrcode	1.3.6.1.4.1.230.5.6.2.3.1.24	INTEGER	read-only	network reset code: Value of the last network reset code.
INT nvItipstatNrdiag	1.3.6.1.4.1.230.5.6.2.3.1.25	INTEGER	read-only	network reset diag: Value of the last network reset diagnostic code.
CTR nvItipstatNrxpaks	1.3.6.1.4.1.230.5.6.2.3.1.37	Counter	read-only	number of received packets (from network). Number of packets received from the network. Statistic is zeroed at startup time.
CTR nvItipstatNrxresets	1.3.6.1.4.1.230.5.6.2.3.1.39	Counter	read-only	number of received resets. Number of resets received from network. Statistic is zeroed at startup time.
CTR nvItipstatNtccs	1.3.6.1.4.1.230.5.6.2.3.1.33	Counter	read-only	number of term connection commands. Count of service requests received from the terminal. Statistic is zeroed at startup time.
CTR nvItipstatNtconn	1.3.6.1.4.1.230.5.6.2.3.1.50	Counter	read-only	Number of terminal connections. Number of times modem successfully trained.
CTR nvItipstatNtdc	1.3.6.1.4.1.230.5.6.2.3.1.51	Counter	read-only	Number of terminal disconnect commands. Number of time terminal disconnected.
CTR nvItipstatNtimeout	1.3.6.1.4.1.230.5.6.2.3.1.53	Counter	read-only	Number of disconnects caused by ITI timeout.
CTR nvItipstatNtxpaks	1.3.6.1.4.1.230.5.6.2.3.1.36	Counter	read-only	number of transmitted packets (to network). Number of packets sent on the network. Statistic is zeroed at startup time.
CTR nvItipstatNtxresets	1.3.6.1.4.1.230.5.6.2.3.1.38	Counter	read-only	number of transmitted resets. Number of resets originated. Statistic is zeroed at startup time.
INT nvItipstatNumRec	1.3.6.1.4.1.230.5.6.2.2	INTEGER	read-only	number of records in use.
INT nvItipstatOrg	1.3.6.1.4.1.230.5.6.2.3.1.26	INTEGER	read-only	call originator. Flag indicating who originated the call in progress.
STR nvItipstatParam	1.3.6.1.4.1.230.5.6.2.3.1.46	DisplayString	read-only	Copy of the current settings of the X.3 parameters (EX standard) for this port. This byte array must contain at least P_MAX + 1 bytes.
STR nvItipstatPortname	1.3.6.1.4.1.230.5.6.2.3.1.2	DisplayString	read-only	Name of port. This field identifies which port the statistics in this record pertain to.
STR nvItipstatPreparam	1.3.6.1.4.1.230.5.6.2.3.1.47	DisplayString	read-only	Copy of X.3 parameters that were in effect before the current call (if any) was made. These values are restored (back to param) after the call is cleared.
INT nvItipstatPrio	1.3.6.1.4.1.230.5.6.2.3.1.18	INTEGER	read-only	priority call: Flag indicating if priority calling is beng used.
INT nvItipstatPvc	1.3.6.1.4.1.230.5.6.2.3.1.20	INTEGER	read-only	pvc code: Permanent Virtual Circuit Code.
STR nvItipstatReserve1	1.3.6.1.4.1.230.5.6.2.3.1.3	DisplayString	read-only	OBSOLETE - removed field.
STR nvItipstatReservet	1.3.6.1.4.1.230.5.6.2.3.1.32	DisplayString	read-only	OBSOLETE - removed field.
INT nvItipstatRevf	1.3.6.1.4.1.230.5.6.2.3.1.17	INTEGER	read-only	reverse charging: Flag indicating if reverse charging is being used.
INT nvItipstatRpoa	1.3.6.1.4.1.230.5.6.2.3.1.16	INTEGER	read-only	rpoa: DNIC
INT nvItipstatRxPsze	1.3.6.1.4.1.230.5.6.2.3.1.9	INTEGER	read-only	packet size: Receive Packet size used.
INT nvItipstatRxTput	1.3.6.1.4.1.230.5.6.2.3.1.13	INTEGER	read-only	throughput class: receive Throughput class used.
INT nvItipstatRxWsze	1.3.6.1.4.1.230.5.6.2.3.1.11	INTEGER	read-only	window size: receive Window size used.
STR nvItipstatSrcadr	1.3.6.1.4.1.230.5.6.2.3.1.6	DisplayString	read-only	source address: Source network address.
INT nvItipstatState	1.3.6.1.4.1.230.5.6.2.3.1.27	INTEGER	read-only	iti internal state: Internal state of the ITI interface.
nvItipstatTable	1.3.6.1.4.1.230.5.6.2.3		not-accessible	itipstat file.
INT nvItipstatTxPsze	1.3.6.1.4.1.230.5.6.2.3.1.8	INTEGER	read-only	packet size: Transmit Packet size used.
INT nvItipstatTxTput	1.3.6.1.4.1.230.5.6.2.3.1.12	INTEGER	read-only	throughput class: transmit Throughput class used.
INT nvItipstatTxWsze	1.3.6.1.4.1.230.5.6.2.3.1.10	INTEGER	read-only	window size: transmit Window size used.
STR nvItipstatUserdata	1.3.6.1.4.1.230.5.6.2.3.1.28	DisplayString	read-only	user data: User specified user data.
STR nvItipstatUsername	1.3.6.1.4.1.230.5.6.2.3.1.29	DisplayString	read-only	iti class: Current user using this port.
INT nvItipstatX28type	1.3.6.1.4.1.230.5.6.2.3.1.30	INTEGER	read-only	command standard.
INT nvItipstatX3type	1.3.6.1.4.1.230.5.6.2.3.1.31	INTEGER	read-only	parameter standard: Current X.3 parameter standard being used.
nvItirpoa	1.3.6.1.4.1.230.5.6.14
STR nvItirpoaCarrier	1.3.6.1.4.1.230.5.6.14.3.1.3	DisplayString	read-write	RPOA Name (carrier)
INT nvItirpoaCode	1.3.6.1.4.1.230.5.6.14.3.1.2	INTEGER	read-write	RPOA Code (code)
nvItirpoaEntry	1.3.6.1.4.1.230.5.6.14.3.1		not-accessible	itirpoa record.
INT nvItirpoaIndex	1.3.6.1.4.1.230.5.6.14.3.1.1	INTEGER	read-only	Index of itirpoa record
INT nvItirpoaMaxRec	1.3.6.1.4.1.230.5.6.14.1	INTEGER	read-only	total number of records allowed in database file.
INT nvItirpoaNumRec	1.3.6.1.4.1.230.5.6.14.2	INTEGER	read-only	number of records in use.
INT nvItirpoaStatus	1.3.6.1.4.1.230.5.6.14.3.1.4	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvItirpoaTable	1.3.6.1.4.1.230.5.6.14.3		not-accessible	itirpoa file.
nvItiuser	1.3.6.1.4.1.230.5.6.15
INT nvItiuserCallback	1.3.6.1.4.1.230.5.6.15.3.1.3	INTEGER	read-write	User Callback Number Id (callback) Default value is 0.
INT nvItiuserClrestrct	1.3.6.1.4.1.230.5.6.15.3.1.4	INTEGER	read-write	Class Restriction (clrestrct) Default value is 1+1.
nvItiuserEntry	1.3.6.1.4.1.230.5.6.15.3.1		not-accessible	itiuser record.
INT nvItiuserIndex	1.3.6.1.4.1.230.5.6.15.3.1.1	INTEGER	read-only	Index of itiuser record
INT nvItiuserInitcmd	1.3.6.1.4.1.230.5.6.15.3.1.5	INTEGER	read-write	Initial Automatic Command Id (initcmd) Default value is 0.
INT nvItiuserMaxRec	1.3.6.1.4.1.230.5.6.15.1	INTEGER	read-only	total number of records allowed in database file.
STR nvItiuserNumber	1.3.6.1.4.1.230.5.6.15.3.1.9	DisplayString	read-write	Call back number
INT nvItiuserNumRec	1.3.6.1.4.1.230.5.6.15.2	INTEGER	read-only	number of records in use.
INT nvItiuserStatus	1.3.6.1.4.1.230.5.6.15.3.1.8	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvItiuserTable	1.3.6.1.4.1.230.5.6.15.3		not-accessible	itiprof file.
STR nvItiuserUserclass	1.3.6.1.4.1.230.5.6.15.3.1.6	DisplayString	read-write	Class Assignment (userclass)
STR nvItiuserUsername	1.3.6.1.4.1.230.5.6.15.3.1.2	DisplayString	read-write	User Name (username)
STR nvItiuserUserpaswd	1.3.6.1.4.1.230.5.6.15.3.1.7	DisplayString	read-write	User Password (userpaswd)
nvItiustat	1.3.6.1.4.1.230.5.6.5
STR nvItiustatDtreset	1.3.6.1.4.1.230.5.6.5.3.1.9	DisplayString	read-only	date & time statistics last reset
TIK nvItiustatDuration	1.3.6.1.4.1.230.5.6.5.3.1.6	TimeTicks	read-only	length of time used by user. Total number of minutes of time (10060). Statistic is zeroed at startup time.
nvItiustatEntry	1.3.6.1.4.1.230.5.6.5.3.1		not-accessible	itiustat record.
INT nvItiustatIndex	1.3.6.1.4.1.230.5.6.5.3.1.1	INTEGER	read-only	Index of itiustat record
INT nvItiustatMaxRec	1.3.6.1.4.1.230.5.6.5.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvItiustatNcallbacks	1.3.6.1.4.1.230.5.6.5.3.1.5	Counter	read-only	number of callbacks. Total number of callbacks to this user. Statistic is zeroed at startup time.
CTR nvItiustatNcalls	1.3.6.1.4.1.230.5.6.5.3.1.3	Counter	read-only	number of calls made. Total number of calls initiated by user Statistic is zeroed at startup time.
CTR nvItiustatNpassfails	1.3.6.1.4.1.230.5.6.5.3.1.4	Counter	read-only	number of password failures. Total number of password failures. Statistic is zeroed at startup time.
CTR nvItiustatNrxpaks	1.3.6.1.4.1.230.5.6.5.3.1.8	Counter	read-only	number of received packets (from network). Total number packets received by this user over the network. Statistic is zeroed at startup time.
CTR nvItiustatNtxpaks	1.3.6.1.4.1.230.5.6.5.3.1.7	Counter	read-only	number of transmitted packets (to network). Total number packets sent by this user over the network. Statistic is zeroed at startup time.
INT nvItiustatNumRec	1.3.6.1.4.1.230.5.6.5.2	INTEGER	read-only	number of records in use.
nvItiustatTable	1.3.6.1.4.1.230.5.6.5.3		not-accessible	itiustat file.
STR nvItiustatUsername	1.3.6.1.4.1.230.5.6.5.3.1.2	DisplayString	read-only	Name of user. This field identifies which user the statistics in this record pertain to.
nvL2tpconf	1.3.6.1.4.1.230.5.70.1
INT nvL2tpconfAckTimout	1.3.6.1.4.1.230.5.70.1.3.1.3	INTEGER	read-write	acknowlege timeout.
INT nvL2tpconfAdminStat	1.3.6.1.4.1.230.5.70.1.3.1.2	INTEGER	read-write	enable l2tp protocol stack.
nvL2tpconfEntry	1.3.6.1.4.1.230.5.70.1.3.1		not-accessible	l2tpconf record.
INT nvL2tpconfIdle	1.3.6.1.4.1.230.5.70.1.3.1.6	INTEGER	read-write	max idle prior to closing tunnel
INT nvL2tpconfInactivty	1.3.6.1.4.1.230.5.70.1.3.1.4	INTEGER	read-write	Inactivty interval for hello msg.
INT nvL2tpconfIndex	1.3.6.1.4.1.230.5.70.1.3.1.1	INTEGER	read-only	Index of L2tpconf record.
INT nvL2tpconfMaxRec	1.3.6.1.4.1.230.5.70.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvL2tpconfNumRec	1.3.6.1.4.1.230.5.70.1.2	INTEGER	read-only	number of records in use.
INT nvL2tpconfRetrans	1.3.6.1.4.1.230.5.70.1.3.1.5	INTEGER	read-write	max retransmit before closing.
INT nvL2tpconfStatus	1.3.6.1.4.1.230.5.70.1.3.1.7	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvL2tpconfTable	1.3.6.1.4.1.230.5.70.1.3		not-accessible	l2tpconf file.
nvL2tpsstat	1.3.6.1.4.1.230.5.70.4
INT nvL2tpsstatCallSN	1.3.6.1.4.1.230.5.70.4.3.1.5	INTEGER	read-only	Call Serial Number.
INT nvL2tpsstatDataRecv	1.3.6.1.4.1.230.5.70.4.3.1.8	INTEGER	read-only	Received Data Packets.
INT nvL2tpsstatDataSend	1.3.6.1.4.1.230.5.70.4.3.1.9	INTEGER	read-only	Sent Data Packets.
INT nvL2tpsstatDeviceNum	1.3.6.1.4.1.230.5.70.4.3.1.7	INTEGER	read-only	Device Number.
STR nvL2tpsstatDtreset	1.3.6.1.4.1.230.5.70.4.3.1.15	DisplayString	read-only	date & time statistics last reset
nvL2tpsstatEntry	1.3.6.1.4.1.230.5.70.4.3.1		not-accessible	l2tpsstat record.
INT nvL2tpsstatIndex	1.3.6.1.4.1.230.5.70.4.3.1.1	INTEGER	read-only	Index of L2tpsstat record
INT nvL2tpsstatLclCallID	1.3.6.1.4.1.230.5.70.4.3.1.3	INTEGER	read-only	Local Call Id of the LNS.
INT nvL2tpsstatMaxRec	1.3.6.1.4.1.230.5.70.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvL2tpsstatNumRec	1.3.6.1.4.1.230.5.70.4.2	INTEGER	read-only	number of records in use.
INT nvL2tpsstatRmtCallID	1.3.6.1.4.1.230.5.70.4.3.1.4	INTEGER	read-only	Remote Call Id of the LNS.
INT nvL2tpsstatState	1.3.6.1.4.1.230.5.70.4.3.1.6	INTEGER	read-only	State.
nvL2tpsstatTable	1.3.6.1.4.1.230.5.70.4.3		not-accessible	l2tpsstat file.
INT nvL2tpsstatTunnelID	1.3.6.1.4.1.230.5.70.4.3.1.2	INTEGER	read-only	Local Tunnel Id of the LAC.
nvL2tpstat	1.3.6.1.4.1.230.5.70.2
INT nvL2tpstatActivSns	1.3.6.1.4.1.230.5.70.2.3.1.3	INTEGER	read-only	number of currently active session
INT nvL2tpstatActivTnls	1.3.6.1.4.1.230.5.70.2.3.1.2	INTEGER	read-only	number of currently active tunnel
INT nvL2tpstatCtrlOofS	1.3.6.1.4.1.230.5.70.2.3.1.7	INTEGER	read-only	number of control packet received out of sequence
INT nvL2tpstatCtrlOofW	1.3.6.1.4.1.230.5.70.2.3.1.6	INTEGER	read-only	number of control packet received outside of window
INT nvL2tpstatCtrlRecv	1.3.6.1.4.1.230.5.70.2.3.1.5	INTEGER	read-only	number of control packet received
INT nvL2tpstatCtrlSend	1.3.6.1.4.1.230.5.70.2.3.1.8	INTEGER	read-only	number of control packet sent
INT nvL2tpstatDataRecv	1.3.6.1.4.1.230.5.70.2.3.1.9	INTEGER	read-only	number of data packet received
INT nvL2tpstatDataSend	1.3.6.1.4.1.230.5.70.2.3.1.10	INTEGER	read-only	number of data packet sent
STR nvL2tpstatDtreset	1.3.6.1.4.1.230.5.70.2.3.1.20	DisplayString	read-only	date & time statistics last reset
nvL2tpstatEntry	1.3.6.1.4.1.230.5.70.2.3.1		not-accessible	L2tpstat record.
INT nvL2tpstatIndex	1.3.6.1.4.1.230.5.70.2.3.1.1	INTEGER	read-only	Index of L2tpstat record
INT nvL2tpstatMaxRec	1.3.6.1.4.1.230.5.70.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvL2tpstatMlfrmPkt	1.3.6.1.4.1.230.5.70.2.3.1.4	INTEGER	read-only	number of malformed packets received by l2tp
INT nvL2tpstatNumRec	1.3.6.1.4.1.230.5.70.2.2	INTEGER	read-only	number of records in use.
INT nvL2tpstatProtVrsn	1.3.6.1.4.1.230.5.70.2.3.1.13	INTEGER	read-only	l2tp protocol version number
INT nvL2tpstatSessUnav	1.3.6.1.4.1.230.5.70.2.3.1.12	INTEGER	read-only	number session not created due to unavailable resources
nvL2tpstatTable	1.3.6.1.4.1.230.5.70.2.3		not-accessible	L2tpstat file.
INT nvL2tpstatTnlUnav	1.3.6.1.4.1.230.5.70.2.3.1.11	INTEGER	read-only	tunnels not created due to unavailable resources
nvL2tptstat	1.3.6.1.4.1.230.5.70.3
STR nvL2tptstatDtreset	1.3.6.1.4.1.230.5.70.3.3.1.20	DisplayString	read-only	date & time statistics last reset
nvL2tptstatEntry	1.3.6.1.4.1.230.5.70.3.3.1		not-accessible	L2tptstat record.
INT nvL2tptstatIndex	1.3.6.1.4.1.230.5.70.3.3.1.1	INTEGER	read-only	Index of L2tptstat record
INT nvL2tptstatLocalTnID	1.3.6.1.4.1.230.5.70.3.3.1.2	INTEGER	read-only	Local Tunnel Id of the LAC
INT nvL2tptstatLocalWSiz	1.3.6.1.4.1.230.5.70.3.3.1.4	INTEGER	read-only	Remote Call Id of the LNS
INT nvL2tptstatMaxRec	1.3.6.1.4.1.230.5.70.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvL2tptstatNumRec	1.3.6.1.4.1.230.5.70.3.2	INTEGER	read-only	number of records in use.
INT nvL2tptstatRecvCtrl	1.3.6.1.4.1.230.5.70.3.3.1.9	INTEGER	read-only	Received Control Packets
INT nvL2tptstatRecvData	1.3.6.1.4.1.230.5.70.3.3.1.10	INTEGER	read-only	Received Data Packets
INT nvL2tptstatRemotTnID	1.3.6.1.4.1.230.5.70.3.3.1.3	INTEGER	read-only	Local call id of the LNS
INT nvL2tptstatRemotWSiz	1.3.6.1.4.1.230.5.70.3.3.1.5	INTEGER	read-only	Call Serial Number
STR nvL2tptstatRmtHstNme	1.3.6.1.4.1.230.5.70.3.3.1.7	DisplayString	read-only	PPP stat file record
STR nvL2tptstatRmtIPaddr	1.3.6.1.4.1.230.5.70.3.3.1.6	DisplayString	read-only	Local Window Size
INT nvL2tptstatSendCtrl	1.3.6.1.4.1.230.5.70.3.3.1.11	INTEGER	read-only	Sent Control Packets
INT nvL2tptstatSendData	1.3.6.1.4.1.230.5.70.3.3.1.12	INTEGER	read-only	Sent Data Packets
nvL2tptstatTable	1.3.6.1.4.1.230.5.70.3.3		not-accessible	L2tptstat file.
INT nvL2tptstatTunlState	1.3.6.1.4.1.230.5.70.3.3.1.8	INTEGER	read-only	Received Data Packets
nvLcpconf	1.3.6.1.4.1.230.5.12.2
STR nvLcpconfAccm	1.3.6.1.4.1.230.5.12.2.3.1.5	DisplayString	read-write	Async. Control Char Map (accm)
INT nvLcpconfAcfc	1.3.6.1.4.1.230.5.12.2.3.1.8	INTEGER	read-write	addr. ctrl fields comp. (acfc) Default value is yes (1+1).
INT nvLcpconfAuth	1.3.6.1.4.1.230.5.12.2.3.1.14	INTEGER	read-write	ppp authentication. none, 1, Disable authentication pap, 2, Password Authentication Protocol chap, 3, Challenge Handshake Authentication Protocol either, 4, First use CHAP, then try PAP telno, 5, Telephone Number Authentication prxypap, 6, Proxy PAP partial authentication prxychap, 7, Proxy CHAP partial authentication prxyeith, 8 Proxy PAP or CHAP partial authentication
INT nvLcpconfChalint	1.3.6.1.4.1.230.5.12.2.3.1.16	INTEGER	read-write	rechallenge interval.
INT nvLcpconfComprot1	1.3.6.1.4.1.230.5.12.2.3.1.19	INTEGER	read-write	First choice for compression.
INT nvLcpconfComprot2	1.3.6.1.4.1.230.5.12.2.3.1.20	INTEGER	read-write	Second choice for compression.
nvLcpconfEntry	1.3.6.1.4.1.230.5.12.2.3.1		not-accessible	lcpconf record.
INT nvLcpconfInactivty	1.3.6.1.4.1.230.5.12.2.3.1.13	INTEGER	read-write	nbus call inact timer (inactivty) Default value is 0.
INT nvLcpconfIndex	1.3.6.1.4.1.230.5.12.2.3.1.1	INTEGER	read-only	Index of lcpconf record
STR nvLcpconfItiudata	1.3.6.1.4.1.230.5.12.2.3.1.4	DisplayString	read-write	iti user data (itiudata)
INT nvLcpconfMaxcfg	1.3.6.1.4.1.230.5.12.2.3.1.11	INTEGER	read-write	configure request count (maxcfg) Default value is 10.
INT nvLcpconfMaxnak	1.3.6.1.4.1.230.5.12.2.3.1.12	INTEGER	read-write	config-Nak send (maxnak) Default value is 10.
INT nvLcpconfMaxRec	1.3.6.1.4.1.230.5.12.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvLcpconfMaxterm	1.3.6.1.4.1.230.5.12.2.3.1.10	INTEGER	read-write	terminate request count (maxterm) Default value is 2.
INT nvLcpconfMode	1.3.6.1.4.1.230.5.12.2.3.1.6	INTEGER	read-write	interface type (mode) Default value is psync (0+1).
INT nvLcpconfMultilink	1.3.6.1.4.1.230.5.12.2.3.1.17	INTEGER	read-write	If yes this LCP is available for use in a multilink bundle.
INT nvLcpconfNaifwd	1.3.6.1.4.1.230.5.12.2.3.1.22	INTEGER	read-write	Forward full NAI or only username
INT nvLcpconfNumRec	1.3.6.1.4.1.230.5.12.2.2	INTEGER	read-only	number of records in use.
INT nvLcpconfPfc	1.3.6.1.4.1.230.5.12.2.3.1.7	INTEGER	read-write	protocol field compression (pfc) Default value is yes (1+1).
STR nvLcpconfPort	1.3.6.1.4.1.230.5.12.2.3.1.2	DisplayString	read-write	Link Name (port).
INT nvLcpconfpppTrapEn	1.3.6.1.4.1.230.5.12.2.3.1.18	INTEGER	read-write	If yes then trap generation is enabled for LCP state changes and other PPP events.
INT nvLcpconfRestartim	1.3.6.1.4.1.230.5.12.2.3.1.9	INTEGER	read-write	lcp reqests restart (restartim) Default value is 3.
STR nvLcpconfRsrcpool	1.3.6.1.4.1.230.5.12.2.3.1.3	DisplayString	read-write	Resource Poolname.
INT nvLcpconfSecurtmr	1.3.6.1.4.1.230.5.12.2.3.1.15	INTEGER	read-write	security timer.
INT nvLcpconfStatus	1.3.6.1.4.1.230.5.12.2.3.1.26	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvLcpconfTable	1.3.6.1.4.1.230.5.12.2.3		not-accessible	lcpconf file.
INT nvLcpconfTxmaxbuf	1.3.6.1.4.1.230.5.12.2.3.1.23	INTEGER	read-write	transmit buffering
STR nvLcpconfUsrdelim	1.3.6.1.4.1.230.5.12.2.3.1.21	DisplayString	read-write	Delimiter for NAI parsing
nvLinkconf	1.3.6.1.4.1.230.5.7.4
INT nvLinkconfAckthresh	1.3.6.1.4.1.230.5.7.4.3.1.16	INTEGER	read-write	Acknowledgement Threshold (ackthresh)
INT nvLinkconfDialout	1.3.6.1.4.1.230.5.7.4.3.1.18	INTEGER	read-write	dialout command string id
nvLinkconfEntry	1.3.6.1.4.1.230.5.7.4.3.1		not-accessible	linkconf record.
INT nvLinkconfHostinact	1.3.6.1.4.1.230.5.7.4.3.1.9	INTEGER	read-write	SDLC Host Inactivity Timer (hostinact) SDLC secondary station maximum wait without host contact. Default value is 600.
INT nvLinkconfIndex	1.3.6.1.4.1.230.5.7.4.3.1.1	INTEGER	read-only	Index of linkconf record
INT nvLinkconfLinkname	1.3.6.1.4.1.230.5.7.4.3.1.2	INTEGER	read-only	Link Name (linkname) Link name and number (ie,'Link1') Parameter is set during factory configuration.
INT nvLinkconfMaxRec	1.3.6.1.4.1.230.5.7.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvLinkconfN2	1.3.6.1.4.1.230.5.7.4.3.1.11	INTEGER	read-write	Number of Retransmissions (n2) Maximum number of times a data frame will be retransmitted, before resetting the link. Default value is 10.
INT nvLinkconfNumRec	1.3.6.1.4.1.230.5.7.4.2	INTEGER	read-only	number of records in use.
INT nvLinkconfPollthres	1.3.6.1.4.1.230.5.7.4.3.1.12	INTEGER	read-write	SDLC Poll Threshold (pollthres) Default value is 20.
STR nvLinkconfPortname	1.3.6.1.4.1.230.5.7.4.3.1.3	DisplayString	read-write	Port to serve this link.
INT nvLinkconfProtocol	1.3.6.1.4.1.230.5.7.4.3.1.5	INTEGER	read-write	Link-Level Protocol (protocol) This field defines the Synchronous Link link procedure that is to be followed. Default value is 3+1.
STR nvLinkconfRsrcpool	1.3.6.1.4.1.230.5.7.4.3.1.4	DisplayString	read-write	Resource Pool Name.
INT nvLinkconfT1	1.3.6.1.4.1.230.5.7.4.3.1.13	INTEGER	read-write	Timer Recovery Timer (t1) Timer for maximum wait for acknowledgment. When timer expires, timeout recovery is attempted. Default value is 5.
INT nvLinkconfT2	1.3.6.1.4.1.230.5.7.4.3.1.14	INTEGER	read-write	Acknowledgement Timer (t2) LAPB maximum amount of time before acknowledgement. Default value is 0.
INT nvLinkconfT3	1.3.6.1.4.1.230.5.7.4.3.1.15	INTEGER	read-write	Link Watchdog Timer (t3) LAPB maximum amount of link idle time before a probe is done. Default value is 15.
nvLinkconfTable	1.3.6.1.4.1.230.5.7.4.3		not-accessible	linkconf file.
INT nvLinkconfWaitframe	1.3.6.1.4.1.230.5.7.4.3.1.19	INTEGER	read-write	Number of T1 periods to wait for frame upon startup.
INT nvLinkconfWsze	1.3.6.1.4.1.230.5.7.4.3.1.6	INTEGER	read-write	Link-Level Window Size (wsze) Option to select window size to be used. Between 1 and 7 for modulo 8. Between 1 and 127 for modulo 127. Default value is 7.
nvLinkstat	1.3.6.1.4.1.230.5.7.2
CTR nvLinkstatAbtfrxs	1.3.6.1.4.1.230.5.7.2.3.1.9	Counter	read-only	Number of aborted frames received. Statistic is zeroed at startup time.
CTR nvLinkstatAlarms	1.3.6.1.4.1.230.5.7.2.3.1.10	Counter	read-only	Number of alarms. Statistic is zeroed at startup time.
INT nvLinkstatApp	1.3.6.1.4.1.230.5.7.2.3.1.3	INTEGER	read-only	link appearence Initial status is 0+1.
STR nvLinkstatDtreset	1.3.6.1.4.1.230.5.7.2.3.1.26	DisplayString	read-only	date & time statistics last reset
nvLinkstatEntry	1.3.6.1.4.1.230.5.7.2.3.1		not-accessible	linkstat record.
CTR nvLinkstatFrmrrxs	1.3.6.1.4.1.230.5.7.2.3.1.11	Counter	read-only	Number of frame-reject frames received. Statistic is zeroed at startup time.
CTR nvLinkstatFrmrtxs	1.3.6.1.4.1.230.5.7.2.3.1.12	Counter	read-only	Number of frame-reject frames transmitted. Statistic is zeroed at startup time.
INT nvLinkstatFstate	1.3.6.1.4.1.230.5.7.2.3.1.4	INTEGER	read-only	main state of FLTE FSM Initial status is 0+1.
CTR nvLinkstatIfrxs	1.3.6.1.4.1.230.5.7.2.3.1.13	Counter	read-only	Number of I-frames received. Statistic is zeroed at startup time.
CTR nvLinkstatIftxs	1.3.6.1.4.1.230.5.7.2.3.1.14	Counter	read-only	Number of I-frames transmitted. Statistic is zeroed at startup time.
INT nvLinkstatIndex	1.3.6.1.4.1.230.5.7.2.3.1.1	INTEGER	read-only	Index of linkstat record
INT nvLinkstatLfrmr	1.3.6.1.4.1.230.5.7.2.3.1.5	INTEGER	read-only	reason code from last FRMR received Initial status is 0+1.
INT nvLinkstatLreset	1.3.6.1.4.1.230.5.7.2.3.1.6	INTEGER	read-only	reason for last link reset Initial status is 0+1.
INT nvLinkstatMaxRec	1.3.6.1.4.1.230.5.7.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvLinkstatN1	1.3.6.1.4.1.230.5.7.2.3.1.7	INTEGER	read-only	actual n1 used (in bits) Initial status is 0.
CTR nvLinkstatNlinkup	1.3.6.1.4.1.230.5.7.2.3.1.27	Counter	read-only	Number of times link came up.
INT nvLinkstatNumRec	1.3.6.1.4.1.230.5.7.2.2	INTEGER	read-only	number of records in use.
STR nvLinkstatPort	1.3.6.1.4.1.230.5.7.2.3.1.2	DisplayString	read-only	name of port being used Initial status is 0.
INT nvLinkstatProtocol	1.3.6.1.4.1.230.5.7.2.3.1.8	INTEGER	read-only	link procedure selected Initial status is 3+1.
CTR nvLinkstatRejrxs	1.3.6.1.4.1.230.5.7.2.3.1.15	Counter	read-only	Number of REJ-frames received. Statistic is zeroed at startup time.
CTR nvLinkstatRejtxs	1.3.6.1.4.1.230.5.7.2.3.1.16	Counter	read-only	Number of REJ-frames transmitted. Statistic is zeroed at startup time.
CTR nvLinkstatRnrrxs	1.3.6.1.4.1.230.5.7.2.3.1.17	Counter	read-only	Number of RNR-frames received. Statistic is zeroed at startup time.
CTR nvLinkstatRnrtxs	1.3.6.1.4.1.230.5.7.2.3.1.18	Counter	read-only	Number of RNR-frames transmitted. Statistic is zeroed at startup time.
CTR nvLinkstatRrrxs	1.3.6.1.4.1.230.5.7.2.3.1.19	Counter	read-only	Number of RR-frames received. Statistic is zeroed at startup time.
CTR nvLinkstatRrtxs	1.3.6.1.4.1.230.5.7.2.3.1.20	Counter	read-only	Number of RR-frames transmitted. Statistic is zeroed at startup time.
CTR nvLinkstatRxdds	1.3.6.1.4.1.230.5.7.2.3.1.21	Counter	read-only	Number of receive device-driver errors. Statistic is zeroed at startup time.
nvLinkstatTable	1.3.6.1.4.1.230.5.7.2.3		not-accessible	linkstat file.
CTR nvLinkstatTcharrxs	1.3.6.1.4.1.230.5.7.2.3.1.25	Counter	read-only	Number of characters received. Statistic is zeroed at startup time.
CTR nvLinkstatTchartxs	1.3.6.1.4.1.230.5.7.2.3.1.24	Counter	read-only	Number of characters sent. Statistic is zeroed at startup time.
CTR nvLinkstatTouts	1.3.6.1.4.1.230.5.7.2.3.1.22	Counter	read-only	Number of link resets due to remote timeouts. Statistic is zeroed at startup time.
CTR nvLinkstatTretrys	1.3.6.1.4.1.230.5.7.2.3.1.23	Counter	read-only	Number of retries due to remote timeouts. Statistic is zeroed at startup time.
nvMediastat	1.3.6.1.4.1.230.5.1.15
INT nvMediastatDebug	1.3.6.1.4.1.230.5.1.15.3.1.4	INTEGER	read-write	debug flag.
INT nvMediastatDump	1.3.6.1.4.1.230.5.1.15.3.1.6	INTEGER	read-write	dump flag.
nvMediastatEntry	1.3.6.1.4.1.230.5.1.15.3.1		not-accessible	Mediastat record.
INT nvMediastatImage	1.3.6.1.4.1.230.5.1.15.3.1.3	INTEGER	read-write	current boot image.
STR nvMediastatImage1db	1.3.6.1.4.1.230.5.1.15.3.1.7	DisplayString	read-only	side0 database version.
STR nvMediastatImage1sw	1.3.6.1.4.1.230.5.1.15.3.1.8	DisplayString	read-only	side0 software version.
STR nvMediastatImage2db	1.3.6.1.4.1.230.5.1.15.3.1.9	DisplayString	read-only	side1 database version.
STR nvMediastatImage2sw	1.3.6.1.4.1.230.5.1.15.3.1.10	DisplayString	read-only	side1 software version.
INT nvMediastatImagechg	1.3.6.1.4.1.230.5.1.15.3.1.5	INTEGER	read-write	auto image change.
INT nvMediastatIndex	1.3.6.1.4.1.230.5.1.15.3.1.1	INTEGER	read-only	Index of mediastat record
INT nvMediastatMaxRec	1.3.6.1.4.1.230.5.1.15.1	INTEGER	read-only	total number of records allowed in database file.
INT nvMediastatMediasize	1.3.6.1.4.1.230.5.1.15.3.1.11	INTEGER	read-only	storage medium size.
INT nvMediastatNumRec	1.3.6.1.4.1.230.5.1.15.2	INTEGER	read-only	number of records in use.
INT nvMediastatOrigimage	1.3.6.1.4.1.230.5.1.15.3.1.2	INTEGER	read-only	original boot image.
nvMediastatTable	1.3.6.1.4.1.230.5.1.15.3		not-accessible	Mediastat file.
nvModemconf	1.3.6.1.4.1.230.5.1.6
INT nvModemconfEnable	1.3.6.1.4.1.230.5.1.6.3.1.5	INTEGER	read-write	Enabled or not.
nvModemconfEntry	1.3.6.1.4.1.230.5.1.6.3.1		not-accessible	modemconf record.
INT nvModemconfIndex	1.3.6.1.4.1.230.5.1.6.3.1.1	INTEGER	read-only	Index of modemconf record
INT nvModemconfMaxRec	1.3.6.1.4.1.230.5.1.6.1	INTEGER	read-only	total number of records allowed in database file.
STR nvModemconfName	1.3.6.1.4.1.230.5.1.6.3.1.2	DisplayString	read-only	Digital modem resource config name (name) Parameter is set during factory configuration.
INT nvModemconfNumRec	1.3.6.1.4.1.230.5.1.6.2	INTEGER	read-only	number of records in use.
STR nvModemconfProfilename	1.3.6.1.4.1.230.5.1.6.3.1.4	DisplayString	read-write	Digital modemprof name that it is associated with
INT nvModemconfStatus	1.3.6.1.4.1.230.5.1.6.3.1.20	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvModemconfTable	1.3.6.1.4.1.230.5.1.6.3		not-accessible	modemconf file.
nvModemprof	1.3.6.1.4.1.230.5.1.32
INT nvModemprofAnston	1.3.6.1.4.1.230.5.1.32.3.1.17	INTEGER	read-write	Modem generate answer (anston) tone.
INT nvModemprofAnstondur	1.3.6.1.4.1.230.5.1.32.3.1.18	INTEGER	read-write	Mode answer tone (anstondur) duration.
INT nvModemprofBildly	1.3.6.1.4.1.230.5.1.32.3.1.19	INTEGER	read-write	Modem wait to send answer (bildly) tone.
INT nvModemprofCmpdtype	1.3.6.1.4.1.230.5.1.32.3.1.13	INTEGER	read-write	Modem companding type.
INT nvModemprofDc	1.3.6.1.4.1.230.5.1.32.3.1.9	INTEGER	read-write	Modem data compression option.
STR nvModemprofDspname	1.3.6.1.4.1.230.5.1.32.3.1.6	DisplayString	read-write	Device usage group name.
INT nvModemprofEc	1.3.6.1.4.1.230.5.1.32.3.1.8	INTEGER	read-write	Modem error correction option.
nvModemprofEntry	1.3.6.1.4.1.230.5.1.32.3.1		not-accessible	modemconf record.
INT nvModemprofFalbckchr	1.3.6.1.4.1.230.5.1.32.3.1.21	INTEGER	read-write	modem autorel fallback char.
INT nvModemprofIndex	1.3.6.1.4.1.230.5.1.32.3.1.1	INTEGER	read-only	Index of modemconf record
INT nvModemprofMaxRec	1.3.6.1.4.1.230.5.1.32.1	INTEGER	read-only	total number of records allowed in database file.
INT nvModemprofMode	1.3.6.1.4.1.230.5.1.32.3.1.10	INTEGER	read-write	Modem sync / async option.
STR nvModemprofName	1.3.6.1.4.1.230.5.1.32.3.1.2	DisplayString	read-write	Modem Prof resource config name (name)
INT nvModemprofNumRec	1.3.6.1.4.1.230.5.1.32.2	INTEGER	read-only	number of records in use.
STR nvModemprofRsrcpool	1.3.6.1.4.1.230.5.1.32.3.1.5	DisplayString	read-write	Resource pool name.
INT nvModemprofRxthresh	1.3.6.1.4.1.230.5.1.32.3.1.15	INTEGER	read-write	Modem receive threshold (rxthresh) Default value is 38.
INT nvModemprofStatus	1.3.6.1.4.1.230.5.1.32.3.1.20	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvModemprofTable	1.3.6.1.4.1.230.5.1.32.3		not-accessible	modemconf file.
INT nvModemprofTxlvl	1.3.6.1.4.1.230.5.1.32.3.1.14	INTEGER	read-write	Transmit level (txlvl) Default value is 13.
INT nvModemprofType	1.3.6.1.4.1.230.5.1.32.3.1.7	INTEGER	read-write	Modem modulation scheme (type) Default value is 3.
nvModemstat	1.3.6.1.4.1.230.5.1.5
STR nvModemstatAccms	1.3.6.1.4.1.230.5.1.5.3.1.11	DisplayString	read-only	for async to sync PPP, shows asy char control maps.
INT nvModemstatDctype	1.3.6.1.4.1.230.5.1.5.3.1.7	INTEGER	read-only	modem data compression status.
STR nvModemstatDsp	1.3.6.1.4.1.230.5.1.5.3.1.20	DisplayString	read-only	the name of the DSP allocated.
STR nvModemstatDtreset	1.3.6.1.4.1.230.5.1.5.3.1.21	DisplayString	read-only	date & time statistics last reset
INT nvModemstatEctype	1.3.6.1.4.1.230.5.1.5.3.1.6	INTEGER	read-only	modem error correction status
nvModemstatEntry	1.3.6.1.4.1.230.5.1.5.3.1		not-accessible	modemstat record.
STR nvModemstatFirmver	1.3.6.1.4.1.230.5.1.5.3.1.17	DisplayString	read-only	Firmware version number
INT nvModemstatIndex	1.3.6.1.4.1.230.5.1.5.3.1.1	INTEGER	read-only	Index of Modemstat record
INT nvModemstatMaxRec	1.3.6.1.4.1.230.5.1.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvModemstatMode	1.3.6.1.4.1.230.5.1.5.3.1.8	INTEGER	read-only	synchronous or asynchronous.
STR nvModemstatModel	1.3.6.1.4.1.230.5.1.5.3.1.18	DisplayString	read-only	DSP microcode product code.
INT nvModemstatMse	1.3.6.1.4.1.230.5.1.5.3.1.12	INTEGER	read-only	modem noise level (mean squared err).
STR nvModemstatName	1.3.6.1.4.1.230.5.1.5.3.1.2	DisplayString	read-only	digital modem status name.
INT nvModemstatNumRec	1.3.6.1.4.1.230.5.1.5.2	INTEGER	read-only	number of records in use.
INT nvModemstatRate	1.3.6.1.4.1.230.5.1.5.3.1.4	INTEGER	read-only	modem rate in bps.
INT nvModemstatRcvlvl	1.3.6.1.4.1.230.5.1.5.3.1.13	INTEGER	read-only	Modem receive level.
INT nvModemstatRenego	1.3.6.1.4.1.230.5.1.5.3.1.15	INTEGER	read-only	Number renegotiations this call.
INT nvModemstatRetrain	1.3.6.1.4.1.230.5.1.5.3.1.14	INTEGER	read-only	Number retrains this call.
INT nvModemstatRxparity	1.3.6.1.4.1.230.5.1.5.3.1.9	INTEGER	read-only	receive parity setting.
INT nvModemstatRxpclear	1.3.6.1.4.1.230.5.1.5.3.1.19	INTEGER	read-only	Modem clear rx parity (rxpclear) bit.
INT nvModemstatSelftest	1.3.6.1.4.1.230.5.1.5.3.1.16	INTEGER	read-only	soft init selftest result.
INT nvModemstatState	1.3.6.1.4.1.230.5.1.5.3.1.3	INTEGER	read-only	Current state
nvModemstatTable	1.3.6.1.4.1.230.5.1.5.3		not-accessible	modemstat file.
INT nvModemstatTxparity	1.3.6.1.4.1.230.5.1.5.3.1.10	INTEGER	read-only	transmit parity setting.
INT nvModemstatType	1.3.6.1.4.1.230.5.1.5.3.1.5	INTEGER	read-only	modem modulation scheme.
nvMpconf	1.3.6.1.4.1.230.5.12.3
INT nvMpconfAdminS	1.3.6.1.4.1.230.5.12.3.3.1.3	INTEGER	read-write	If set to enable no multilink sessions can be started from LCP records which match the nvMpconfProfile of this record.
INT nvMpconfComprot1	1.3.6.1.4.1.230.5.12.3.3.1.9	INTEGER	read-write	First choice for compression.
INT nvMpconfComprot2	1.3.6.1.4.1.230.5.12.3.3.1.10	INTEGER	read-write	Second choice for compression.
INT nvMpconfComptype	1.3.6.1.4.1.230.5.12.3.3.1.11	INTEGER	read-write	Second choice for compression.
nvMpconfEntry	1.3.6.1.4.1.230.5.12.3.3.1		not-accessible	mpconf record.
INT nvMpconfIndex	1.3.6.1.4.1.230.5.12.3.3.1.1	INTEGER	read-only	Index of Mpconf record.
INT nvMpconfLnkLimit	1.3.6.1.4.1.230.5.12.3.3.1.5	INTEGER	read-write	The maximum number of links permitted in multilink bundles created from this mpconf record.
INT nvMpconfMaxRec	1.3.6.1.4.1.230.5.12.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvMpconfNumRec	1.3.6.1.4.1.230.5.12.3.2	INTEGER	read-only	number of records in use.
STR nvMpconfProfile	1.3.6.1.4.1.230.5.12.3.3.1.2	DisplayString	read-write	Must match lcp record itiudata (async ppp) or rsrcpool (sync ppp) field for multilink to operate on the lcp.
INT nvMpconfStatus	1.3.6.1.4.1.230.5.12.3.3.1.24	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvMpconfTable	1.3.6.1.4.1.230.5.12.3.3		not-accessible	mpconf file.
INT nvMpconfTrapEnable	1.3.6.1.4.1.230.5.12.3.3.1.4	INTEGER	read-write	If set to yes Nevada enterprise traps will be generated for certain events occuring relative to multilink bundles. For example, when a new link joins a multilink bundle. No traps for multilink are generated if set to no.
INT nvMpconfTxFrag	1.3.6.1.4.1.230.5.12.3.3.1.6	INTEGER	read-write	When set to yes PPP datagrams larger than nvMpconfTxFragMin bytes will be fragmented before transmission on the links in the bundle.
INT nvMpconfTxFragMin	1.3.6.1.4.1.230.5.12.3.3.1.7	INTEGER	read-write	PPP datagrams smaller than mvMpconfTxFragMin bytes will not be fragmented before transmission regardless of the setting of nvMpconfTxFrag.
INT nvMpconfTxShortSeq	1.3.6.1.4.1.230.5.12.3.3.1.8	INTEGER	read-write	When set to yes the Nevada will attempt to negotiate the short sequence number option on multilink bundles created from this record. When set to no the Nevada will reject attempts to negotiate short sequence numbers.
nvMpstatPart1	1.3.6.1.4.1.230.5.12.4
nvMpstatPart1Entry	1.3.6.1.4.1.230.5.12.4.3.1		not-accessible	mpstatPart1 record.
INT nvMpstatPart1Index	1.3.6.1.4.1.230.5.12.4.3.1.1	INTEGER	read-only	Index of MpstatPart1 record
STR nvMpstatPart1IpAddress	1.3.6.1.4.1.230.5.12.4.3.1.5	DisplayString	read-only	IP address in use on this multilink bundle (ipaddr).
INT nvMpstatPart1Ipcp	1.3.6.1.4.1.230.5.12.4.3.1.4	INTEGER	read-only	ipcpconf file record number in use for this multilink bundle (ipcp).
INT nvMpstatPart1IpcpOperS	1.3.6.1.4.1.230.5.12.4.3.1.3	INTEGER	read-only	Ipcp operation status (ipcpOperS)- IPCP protocol up or not.
STR nvMpstatPart1Link1	1.3.6.1.4.1.230.5.12.4.3.1.15	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link10	1.3.6.1.4.1.230.5.12.4.3.1.24	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link11	1.3.6.1.4.1.230.5.12.4.3.1.25	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link12	1.3.6.1.4.1.230.5.12.4.3.1.26	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link13	1.3.6.1.4.1.230.5.12.4.3.1.27	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link14	1.3.6.1.4.1.230.5.12.4.3.1.28	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link15	1.3.6.1.4.1.230.5.12.4.3.1.29	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link16	1.3.6.1.4.1.230.5.12.4.3.1.30	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link2	1.3.6.1.4.1.230.5.12.4.3.1.16	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link3	1.3.6.1.4.1.230.5.12.4.3.1.17	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link4	1.3.6.1.4.1.230.5.12.4.3.1.18	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link5	1.3.6.1.4.1.230.5.12.4.3.1.19	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link6	1.3.6.1.4.1.230.5.12.4.3.1.20	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link7	1.3.6.1.4.1.230.5.12.4.3.1.21	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link8	1.3.6.1.4.1.230.5.12.4.3.1.22	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
STR nvMpstatPart1Link9	1.3.6.1.4.1.230.5.12.4.3.1.23	DisplayString	read-only	The LCP record number corresponding to nth link in the multilink bundle (link n).
INT nvMpstatPart1LocClass	1.3.6.1.4.1.230.5.12.4.3.1.9	INTEGER	read-only	Class of endpoint discriminator in use on local (Nevada) end of multilink bundle (locClass).
STR nvMpstatPart1LocDisc	1.3.6.1.4.1.230.5.12.4.3.1.10	DisplayString	read-only	Value of endpoint discriminator in use on local (Nevada) end of multilink bundle (rmtDisc).
INT nvMpstatPart1LocMRRU	1.3.6.1.4.1.230.5.12.4.3.1.12	INTEGER	read-only	Value for the Maximum Reassembled Receive Unit negotiated for local (Nevada) end of multilink bundle (locMRRU).
INT nvMpstatPart1LocSeqS	1.3.6.1.4.1.230.5.12.4.3.1.14	INTEGER	read-only	Indicates whether short or long sequence numbers are in use for multilink datagrams received by the Nevada (locSeq).
INT nvMpstatPart1MaxRec	1.3.6.1.4.1.230.5.12.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvMpstatPart1NumRec	1.3.6.1.4.1.230.5.12.4.2	INTEGER	read-only	number of records in use.
STR nvMpstatPart1Profile	1.3.6.1.4.1.230.5.12.4.3.1.6	DisplayString	read-only	nvMpconfProfile value of nvMpconfTable entry (mpconf record) used to create this multilink bundle (profile).
INT nvMpstatPart1RmtClass	1.3.6.1.4.1.230.5.12.4.3.1.7	INTEGER	read-only	Class of endpoint discriminator in use on remote (peer) end of multilink bundle (rmtClass).
STR nvMpstatPart1RmtDisc	1.3.6.1.4.1.230.5.12.4.3.1.8	DisplayString	read-only	Value of endpoint discriminator in use on remote (peer) end of multilink bundle (rmtDisc).
INT nvMpstatPart1RmtMRRU	1.3.6.1.4.1.230.5.12.4.3.1.11	INTEGER	read-only	Value for the Maximum Reassembled Receive Unit negotiated for remote (peer) end of multilink bundle (rmtMRRU).
INT nvMpstatPart1RmtSeqS	1.3.6.1.4.1.230.5.12.4.3.1.13	INTEGER	read-only	Indicates whether short or long sequence numbers are in use for multilink datagrams transmitted to the peer by the Nevada (rmtSeq).
nvMpstatPart1Table	1.3.6.1.4.1.230.5.12.4.3		not-accessible	mpstatPart1 file.
STR nvMpstatPart1UserName	1.3.6.1.4.1.230.5.12.4.3.1.2	DisplayString	read-only	Authenticated name of remote peer.
nvMpstatPart2	1.3.6.1.4.1.230.5.12.5
STR nvMpstatPart2Dtreset	1.3.6.1.4.1.230.5.12.5.3.1.27	DisplayString	read-only	date & time statistics last reset
nvMpstatPart2Entry	1.3.6.1.4.1.230.5.12.5.3.1		not-accessible	mpstatPart2 record.
CTR nvMpstatPart2InBfrags	1.3.6.1.4.1.230.5.12.5.3.1.4	Counter	read-only	The number of good received multilink frames with the B bit set in the multilink header (beginning fragment). Statistic is zeroed at startup time.
CTR nvMpstatPart2InCmPcnt	1.3.6.1.4.1.230.5.12.5.3.1.25	Counter	read-only	Percent compression on rx.
INT nvMpstatPart2Index	1.3.6.1.4.1.230.5.12.5.3.1.1	INTEGER	read-only	Index of MpstatPart2 record
CTR nvMpstatPart2InDiscrd	1.3.6.1.4.1.230.5.12.5.3.1.8	Counter	read-only	discarded good packets (InDiscrd) The total number of good frames dicarded due to lack of buffers Statistic is zeroed at startup time.
CTR nvMpstatPart2InDiscRq	1.3.6.1.4.1.230.5.12.5.3.1.12	Counter	read-only	discard requests Rxed (InDiscRq) The number of discard request packets received. Statistic is zeroed at startup time.
CTR nvMpstatPart2InEch	1.3.6.1.4.1.230.5.12.5.3.1.10	Counter	read-only	received echo requests (InEch) The number of echo request packets recieved. Statistic is zeroed at startup time.
CTR nvMpstatPart2InEchRp	1.3.6.1.4.1.230.5.12.5.3.1.11	Counter	read-only	echo reply received (InEchRp) The num of packets Rxed due to the echo-req sent (software loopback) Statistic is zeroed at startup time.
CTR nvMpstatPart2InEfrags	1.3.6.1.4.1.230.5.12.5.3.1.5	Counter	read-only	The number of good received multilink frames with the E bit set in the multilink header (ending fragment) . Statistic is zeroed at startup time.
CTR nvMpstatPart2InErrors	1.3.6.1.4.1.230.5.12.5.3.1.9	Counter	read-only	Bad packets received (InError) The total number of frames received with errors due to crc,format etc. Statistic is zeroed at startup time.
CTR nvMpstatPart2InMfrags	1.3.6.1.4.1.230.5.12.5.3.1.6	Counter	read-only	The number of good received multilink frames with neither the B nor the E bit set in the multilink header (middle fragment). Statistic is zeroed at startup time.
CTR nvMpstatPart2InOctets	1.3.6.1.4.1.230.5.12.5.3.1.2	Counter	read-only	Octets received (InOctets) The number of good data bytes received Statistic is zeroed at startup time.
CTR nvMpstatPart2InPkts	1.3.6.1.4.1.230.5.12.5.3.1.3	Counter	read-only	good packets received (InPkts) The number of good received frames Statistic is zeroed at startup time.
CTR nvMpstatPart2InRsmErr	1.3.6.1.4.1.230.5.12.5.3.1.7	Counter	read-only	number of times the multilink receive algorithm detected one or more lost PPP datagrams (InRsmErr). Statistic is zeroed at startup time.
INT nvMpstatPart2MaxRec	1.3.6.1.4.1.230.5.12.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvMpstatPart2NumRec	1.3.6.1.4.1.230.5.12.5.2	INTEGER	read-only	number of records in use.
CTR nvMpstatPart2OutBfrags	1.3.6.1.4.1.230.5.12.5.3.1.16	Counter	read-only	The number of multilink frames transmitted with the B bit set in the multilink header (beginning fragment). Statistic is zeroed at startup time.
CTR nvMpstatPart2OutCmPcnt	1.3.6.1.4.1.230.5.12.5.3.1.24	Counter	read-only	Percent compression on tx.
CTR nvMpstatPart2OutDiscrd	1.3.6.1.4.1.230.5.12.5.3.1.19	Counter	read-only	output errors (OutDiscrd) The number of outbound pkts droped due to lack of buffers. Statistic is zeroed at startup time.
CTR nvMpstatPart2OutDiscRq	1.3.6.1.4.1.230.5.12.5.3.1.23	Counter	read-only	discard requests Txed (OutDiscRq) The number of discard request packets received. Statistic is zeroed at startup time.
CTR nvMpstatPart2OutEch	1.3.6.1.4.1.230.5.12.5.3.1.21	Counter	read-only	echo request pkts transmitted (OutEch) The number of lcp echo request packets transmitted Statistic is zeroed at startup time.
CTR nvMpstatPart2OutEchRp	1.3.6.1.4.1.230.5.12.5.3.1.22	Counter	read-only	echo reply transmitted (OutEchRp) The num of echo reply packets Txed due to the echo-req Statistic is zeroed at startup time.
CTR nvMpstatPart2OutEfrags	1.3.6.1.4.1.230.5.12.5.3.1.17	Counter	read-only	The number of multilink frames transmitted with the E bit set in the multilink header (ending fragment) . Statistic is zeroed at startup time.
CTR nvMpstatPart2OutErrors	1.3.6.1.4.1.230.5.12.5.3.1.20	Counter	read-only	output errors (OutErrors) The number of outbound pkts could not be txed due to errors. Statistic is zeroed at startup time.
CTR nvMpstatPart2OutExpnds	1.3.6.1.4.1.230.5.12.5.3.1.26	Counter	read-only	Number of packets expanded by compression.
CTR nvMpstatPart2OutMfrags	1.3.6.1.4.1.230.5.12.5.3.1.18	Counter	read-only	The number of multilink frames transmitted with neither the B nor the E bit set in the multilink header (middle fragment). Statistic is zeroed at startup time.
CTR nvMpstatPart2OutOctets	1.3.6.1.4.1.230.5.12.5.3.1.14	Counter	read-only	Octets transmitted (OutOctets) The number of bytes transmitted on the ppp link. Statistic is zeroed at startup time.
CTR nvMpstatPart2OutPkts	1.3.6.1.4.1.230.5.12.5.3.1.15	Counter	read-only	Packets transmitted (OutPkts) The number of pakets transmitted on the PPP link. Statistic is zeroed at startup time.
nvMpstatPart2Table	1.3.6.1.4.1.230.5.12.5.3		not-accessible	mpstatPart2 file.
CTR nvMpstatPart2UnKnwnPr	1.3.6.1.4.1.230.5.12.5.3.1.13	Counter	read-only	rxed Unknown protocol (UnKnwnPr) The number of link quality reports received on this PPP link Statistic is zeroed at startup time.
nvNas	1.3.6.1.4.1.230.5.2.1
nvNetcon	1.3.6.1.4.1.230.5.1.13
STR nvNetconCalledad	1.3.6.1.4.1.230.5.1.13.3.1.5	DisplayString	read-only	called network address (from bcd) The called network address.
STR nvNetconCallingad	1.3.6.1.4.1.230.5.1.13.3.1.4	DisplayString	read-only	calling network address (from bcd) The calling network address.
STR nvNetconConid	1.3.6.1.4.1.230.5.1.13.3.1.7	DisplayString	read-only	Internal Network connection identifier.
INT nvNetconConstate	1.3.6.1.4.1.230.5.1.13.3.1.6	INTEGER	read-only	connection state The actual state of this connection. Initial status is 1.
STR nvNetconDstcompid	1.3.6.1.4.1.230.5.1.13.3.1.3	DisplayString	read-only	destination component id Receiving component of the connection.
STR nvNetconDstid	1.3.6.1.4.1.230.5.1.13.3.1.9	DisplayString	read-only	Internal Destination identifier.
nvNetconEntry	1.3.6.1.4.1.230.5.1.13.3.1		not-accessible	netcon record, indexed by record number
INT nvNetconIndex	1.3.6.1.4.1.230.5.1.13.3.1.1	INTEGER	read-only	Index of netcon record
INT nvNetconMaxRec	1.3.6.1.4.1.230.5.1.13.1	INTEGER	read-only	total number of records allowed in database file.
INT nvNetconNumRec	1.3.6.1.4.1.230.5.1.13.2	INTEGER	read-only	number of records in use.
STR nvNetconSrccompid	1.3.6.1.4.1.230.5.1.13.3.1.2	DisplayString	read-only	source component id Originating component of the connection.
STR nvNetconSrcid	1.3.6.1.4.1.230.5.1.13.3.1.8	DisplayString	read-only	Internal Source identifier.
nvNetconTable	1.3.6.1.4.1.230.5.1.13.3		not-accessible	netcon file.
nvNetmap	1.3.6.1.4.1.230.5.1.9
nvNetmapEntry	1.3.6.1.4.1.230.5.1.9.3.1		not-accessible	netmap record.
INT nvNetmapIndex	1.3.6.1.4.1.230.5.1.9.3.1.1	INTEGER	read-only	Index of netmap record
INT nvNetmapMaxRec	1.3.6.1.4.1.230.5.1.9.1	INTEGER	read-only	total number of records allowed in database file.
STR nvNetmapNetaddr	1.3.6.1.4.1.230.5.1.9.3.1.2	DisplayString	read-write	Network X.121 Address (netaddr) This field contains the network address pattern that is matched against the the network address field in a 'call request'.
INT nvNetmapNodeid	1.3.6.1.4.1.230.5.1.9.3.1.4	INTEGER	read-write	Node Identifier (nodeid) This parameter is the identifier of the entity providing the service for a matched network address and user data.
INT nvNetmapNumRec	1.3.6.1.4.1.230.5.1.9.2	INTEGER	read-only	number of records in use.
INT nvNetmapStatus	1.3.6.1.4.1.230.5.1.9.3.1.5	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvNetmapTable	1.3.6.1.4.1.230.5.1.9.3		not-accessible	netmap file.
STR nvNetmapUserdata	1.3.6.1.4.1.230.5.1.9.3.1.3	DisplayString	read-write	User Data (userdata) This field contains the call user data pattern that is matched against the call user data field in a 'call request'.
nvNetpvc	1.3.6.1.4.1.230.5.1.11
nvNetpvcEntry	1.3.6.1.4.1.230.5.1.11.3.1		not-accessible	netpvc record.
INT nvNetpvcIndex	1.3.6.1.4.1.230.5.1.11.3.1.1	INTEGER	read-only	Index of netpvc record
nvNetpvcmap	1.3.6.1.4.1.230.5.1.12
nvNetpvcmapEntry	1.3.6.1.4.1.230.5.1.12.3.1		not-accessible	netpvcmap record.
INT nvNetpvcmapIndex	1.3.6.1.4.1.230.5.1.12.3.1.1	INTEGER	read-only	Index of netpvcmap record
INT nvNetpvcmapMaxRec	1.3.6.1.4.1.230.5.1.12.1	INTEGER	read-only	total number of records allowed in database file.
INT nvNetpvcmapNodeid	1.3.6.1.4.1.230.5.1.12.3.1.3	INTEGER	read-write	Node Identifier (nodeid) This parameter is the identifier of the entity providing 'B' end of a PVC within our network.
INT nvNetpvcmapNumRec	1.3.6.1.4.1.230.5.1.12.2	INTEGER	read-only	number of records in use.
INT nvNetpvcmapPvccode	1.3.6.1.4.1.230.5.1.12.3.1.2	INTEGER	read-write	Global PVC Identifier (pvccode)
INT nvNetpvcmapStatus	1.3.6.1.4.1.230.5.1.12.3.1.10	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvNetpvcmapTable	1.3.6.1.4.1.230.5.1.12.3		not-accessible	netpvcmap file.
INT nvNetpvcMaxRec	1.3.6.1.4.1.230.5.1.11.1	INTEGER	read-only	total number of records allowed in database file.
INT nvNetpvcNumRec	1.3.6.1.4.1.230.5.1.11.2	INTEGER	read-only	number of records in use.
INT nvNetpvcPvccode	1.3.6.1.4.1.230.5.1.11.3.1.4	INTEGER	read-write	Global PVC Identifier (pvccode) PVCCODE uniquely identifies a PVC,and is used as the key to this file when searching for a 'B' end.
INT nvNetpvcPvcend	1.3.6.1.4.1.230.5.1.11.3.1.5	INTEGER	read-write	PVC End (pvcend) Default value is 2+1.
INT nvNetpvcPvcid	1.3.6.1.4.1.230.5.1.11.3.1.3	INTEGER	read-write	Local PVC Identifier (pvcid)
STR nvNetpvcService	1.3.6.1.4.1.230.5.1.11.3.1.2	DisplayString	read-write	Service Component (service) COMPID and PVCID together uniquely identify one end of a PVC,and make up the key to this file when searching for an 'A' end.
INT nvNetpvcStatus	1.3.6.1.4.1.230.5.1.11.3.1.6	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvNetpvcTable	1.3.6.1.4.1.230.5.1.11.3		not-accessible	netpvc file.
nvNetroute	1.3.6.1.4.1.230.5.1.10
nvNetrouteEntry	1.3.6.1.4.1.230.5.1.10.3.1		not-accessible	netroute record.
INT nvNetrouteIndex	1.3.6.1.4.1.230.5.1.10.3.1.1	INTEGER	read-only	Index of netroute record
INT nvNetrouteMaxRec	1.3.6.1.4.1.230.5.1.10.1	INTEGER	read-only	total number of records allowed in database file.
INT nvNetrouteNodeid	1.3.6.1.4.1.230.5.1.10.3.1.2	INTEGER	read-write	Node Identifier (nodeid) This parameter is an identifier of destination node. This value was located in NETMAP.
INT nvNetrouteNumRec	1.3.6.1.4.1.230.5.1.10.2	INTEGER	read-only	number of records in use.
INT nvNetroutePrio	1.3.6.1.4.1.230.5.1.10.3.1.4	INTEGER	read-write	Route Priority (prio) This parameter represents the user-assigned priority of the route. The router searches this file for the highest priority route that will allow more connections. If the highest priority route is unavailable,the next highest is tried until all possibilities are exhausted and the call is cleared. Default value is 100.
STR nvNetrouteService	1.3.6.1.4.1.230.5.1.10.3.1.3	DisplayString	read-write	Service Component (service) This parameter is an index into component table of component providing the service.
INT nvNetrouteStatus	1.3.6.1.4.1.230.5.1.10.3.1.5	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvNetrouteTable	1.3.6.1.4.1.230.5.1.10.3		not-accessible	netroute file.
nvNmsuser	1.3.6.1.4.1.230.5.1.8
STR nvNmsuserCalladdr	1.3.6.1.4.1.230.5.1.8.3.1.2	DisplayString	read-write	NMS X.121 Address (calladdr)
STR nvNmsuserCalldata	1.3.6.1.4.1.230.5.1.8.3.1.3	DisplayString	read-write	NMS Userdata (calldata) Default value is 0.
INT nvNmsuserCug	1.3.6.1.4.1.230.5.1.8.3.1.9	INTEGER	read-write	Closed User Group Id (cug) Default value is 0.
nvNmsuserEntry	1.3.6.1.4.1.230.5.1.8.3.1		not-accessible	nmsuser record.
INT nvNmsuserIndex	1.3.6.1.4.1.230.5.1.8.3.1.1	INTEGER	read-only	Index of nmsuser record
INT nvNmsuserMaxRec	1.3.6.1.4.1.230.5.1.8.1	INTEGER	read-only	total number of records allowed in database file.
STR nvNmsuserNmsid	1.3.6.1.4.1.230.5.1.8.3.1.11	DisplayString	read-write	NMS Identification (nmsid)
INT nvNmsuserNumRec	1.3.6.1.4.1.230.5.1.8.2	INTEGER	read-only	number of records in use.
INT nvNmsuserOchrg	1.3.6.1.4.1.230.5.1.8.3.1.8	INTEGER	read-write	Outgoing Charging Restriction (ochrg) Default value is 1+1.
STR nvNmsuserPassword	1.3.6.1.4.1.230.5.1.8.3.1.4	DisplayString	read-write	NMS Component Password (password) Default value is 0.
INT nvNmsuserPsiz	1.3.6.1.4.1.230.5.1.8.3.1.5	INTEGER	read-write	Packet Size (psiz) Default value is 7+1.
INT nvNmsuserRpoacode	1.3.6.1.4.1.230.5.1.8.3.1.7	INTEGER	read-write	RPOA Code (rpoacode) Default value is 0.
INT nvNmsuserStatus	1.3.6.1.4.1.230.5.1.8.3.1.12	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvNmsuserTable	1.3.6.1.4.1.230.5.1.8.3		not-accessible	nmsuser file.
INT nvNmsuserTput	1.3.6.1.4.1.230.5.1.8.3.1.10	INTEGER	read-write	Throughput Class (tput) Default value is 10+1.
INT nvNmsuserWsiz	1.3.6.1.4.1.230.5.1.8.3.1.6	INTEGER	read-write	Window Size (wsiz) Default value is 2.
nvNodeconf	1.3.6.1.4.1.230.5.1.2
INT nvNodeconfAcctrec	1.3.6.1.4.1.230.5.1.2.3.1.16	INTEGER	read-write	Max Accounting Records (acctrec) This indicates the maximum number of accounting records that will be held in memory. When this number is reached, additional records will be discarded. Default value is 100.
INT nvNodeconfAlarmrec	1.3.6.1.4.1.230.5.1.2.3.1.17	INTEGER	read-write	Max Alarm Records (alarmrec) This indicates the maximum number of alarm records buffered Default value is 50.
INT nvNodeconfBusyout	1.3.6.1.4.1.230.5.1.2.3.1.21	INTEGER	read-write	used to busy out ITI ports when X25 links go down
INT nvNodeconfCalarms	1.3.6.1.4.1.230.5.1.2.3.1.10	INTEGER	read-write	Max Custom Alarm Records (calarms) This field indicates the total num of custom alarm entries per box. DO NOT USE HUB-RESERVE3 OR TAKE ANY SPACE AWAY FROM IT TO USE FOR A NEW FIELD. IT IS THE SECRET HIDING PLACE WHERE THE HARDWARE CONFIGURATION IS STORED FOR USE IN DETECTING HARDWARE CHANGES WHEN REBOOTING. Default value is 0.
INT nvNodeconfChgreqid	1.3.6.1.4.1.230.5.1.2.3.1.30	INTEGER	read-write	Change Request Id
STR nvNodeconfClksrc1	1.3.6.1.4.1.230.5.1.2.3.1.31	DisplayString	read-write	Primary clock source to synchronize TDM connects.
STR nvNodeconfClksrc2	1.3.6.1.4.1.230.5.1.2.3.1.32	DisplayString	read-write	Primary clock source to synchronize TDM connects.
STR nvNodeconfClksrc3	1.3.6.1.4.1.230.5.1.2.3.1.33	DisplayString	read-write	Primary clock source to synchronize TDM connects.
STR nvNodeconfDbversion	1.3.6.1.4.1.230.5.1.2.3.1.3	DisplayString	read-only	Database Version (dbversion) Major and minor database release numbers Eg 0300 Similar usage as for software revision number Parameter is set during factory configuration.
INT nvNodeconfDsprfail	1.3.6.1.4.1.230.5.1.2.3.1.34	INTEGER	read-write	dspr failure threshold
nvNodeconfEntry	1.3.6.1.4.1.230.5.1.2.3.1		not-accessible	nodeconf record.
INT nvNodeconfExstat	1.3.6.1.4.1.230.5.1.2.3.1.28	INTEGER	read-write	enhanced x25 stat (exstat)
INT nvNodeconfFrmrfail	1.3.6.1.4.1.230.5.1.2.3.1.35	INTEGER	read-write	frmr failure threshold
INT nvNodeconfIndex	1.3.6.1.4.1.230.5.1.2.3.1.1	INTEGER	read-only	Index of nodeconf record
INT nvNodeconfMaxRec	1.3.6.1.4.1.230.5.1.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvNodeconfNodeid	1.3.6.1.4.1.230.5.1.2.3.1.27	INTEGER	read-write	Node Identifier (nodeid) This field is used by the Network Bus component to identify this node within a private network,and must be unique within that domain. Default value is 1000.
INT nvNodeconfNumRec	1.3.6.1.4.1.230.5.1.2.2	INTEGER	read-only	number of records in use.
STR nvNodeconfPartnum	1.3.6.1.4.1.230.5.1.2.3.1.2	DisplayString	read-only	Part Number -partnum- This is the part number of the software Format: AAAAAA-BBB-C-DDEEFF AAAAAA = Concatenated product code ie. a 4 link,8 channel switching PAD which has the code 2604-8 becomes 260408 BBB = Customer/feature code C = Medium DD = Major version number. A new set of documentation is generated for each major version EE = Database version number FF = Software version number Parameter is set during factory configuration.
INT nvNodeconfQdlifail	1.3.6.1.4.1.230.5.1.2.3.1.36	INTEGER	read-write	Qdli failure threshold
INT nvNodeconfRate1	1.3.6.1.4.1.230.5.1.2.3.1.22	INTEGER	read-write	Rate For Time Zone 1 (rate1)
INT nvNodeconfRate2	1.3.6.1.4.1.230.5.1.2.3.1.23	INTEGER	read-write	Rate For Time Zone 2 (rate2)
INT nvNodeconfRate3	1.3.6.1.4.1.230.5.1.2.3.1.24	INTEGER	read-write	Rate For Time Zone 3 (rate3)
INT nvNodeconfRate4	1.3.6.1.4.1.230.5.1.2.3.1.25	INTEGER	read-write	Rate For Time Zone 4 (rate4)
INT nvNodeconfRsttimer	1.3.6.1.4.1.230.5.1.2.3.1.29	INTEGER	read-write	Restart timer for OMS Default value is 0.
INT nvNodeconfStartup	1.3.6.1.4.1.230.5.1.2.3.1.11	INTEGER	read-write	SD Script to automatically start after aprox. 10 seconds system boot
STR nvNodeconfSwdate	1.3.6.1.4.1.230.5.1.2.3.1.7	DisplayString	read-only	Software Creation Date (swdate) Parameter is set during factory configuration.
INT nvNodeconfSwtype	1.3.6.1.4.1.230.5.1.2.3.1.12	INTEGER	read-write	INF or SmartView Type (swtype) sview for old std billing Default value is sview (0+1).
STR nvNodeconfSwversion	1.3.6.1.4.1.230.5.1.2.3.1.8	DisplayString	read-only	Software Version (swversion) Major and minor software release numbers Eg. 0601 Parameter is set during factory configuration.
nvNodeconfTable	1.3.6.1.4.1.230.5.1.2.3		not-accessible	nodeconf file.
INT nvNodeconfX25call	1.3.6.1.4.1.230.5.1.2.3.1.14	INTEGER	read-write	X.25 Call (nvX25call) This field indicates the total num of lcn per box Default value is 257.
nvNodestat	1.3.6.1.4.1.230.5.1.1
INT nvNodestatChgreqid	1.3.6.1.4.1.230.5.1.1.17	INTEGER	read-only	Change Request ID Confirmation management change request ID.
INT nvNodestatClkfails	1.3.6.1.4.1.230.5.1.1.19	INTEGER	read-only	Number of times clock failure has been detected.
STR nvNodestatCurclk	1.3.6.1.4.1.230.5.1.1.18	DisplayString	read-only	Indicates the current clock source.
INT nvNodestatCurminbufs	1.3.6.1.4.1.230.5.1.1.2	INTEGER	read-only	minimum number of buffers available in last 15 minute cycle Statistic is zeroed at startup time.
INT nvNodestatCurmincpu	1.3.6.1.4.1.230.5.1.1.3	INTEGER	read-only	cpu availablity -minimum percentage of CPU available in last 15 minute cycle. Statistic is zeroed at startup time.
GAU nvNodestatCurtime	1.3.6.1.4.1.230.5.1.1.4	Gauge	read-only	current time number of minutes into current time - is set to 0 at start of current cycle - is incremented every minute - when incremented to 15 then cycle is over and curminbuf and curmincpu are calculated and curtime is set back to 0 Statistic is zeroed at startup time.
STR nvNodestatDtreset	1.3.6.1.4.1.230.5.1.1.20	DisplayString	read-only	date & time statistics last reset
INT nvNodestatFreebufs	1.3.6.1.4.1.230.5.1.1.6	INTEGER	read-only	number of available buffers at last check - check is done every 3 seconds Statistic is zeroed at startup time.
GAU nvNodestatFreecpu	1.3.6.1.4.1.230.5.1.1.7	Gauge	read-only	percentage of CPU available at last check - check is done every 3 seconds Statistic is zeroed at startup time.
INT nvNodestatMaxcpu	1.3.6.1.4.1.230.5.1.1.8	INTEGER	read-only	maximum CPU availablity maximum count of idle CPU cycles per 16 milliseconds - percentages of CPU availability are calculated relative to this number (freecpu,curmincpu,mincpu) Statistic is zeroed at startup time.
INT nvNodestatMinbufs	1.3.6.1.4.1.230.5.1.1.10	INTEGER	read-only	minimum number of buffers minimum number of available buffers ever recorded Statistic is zeroed at startup time.
INT nvNodestatMincpu	1.3.6.1.4.1.230.5.1.1.11	INTEGER	read-only	cpu availablity minimum percentage of CPU available ever recorded Statistic is zeroed at startup time.
INT nvNodestatNumcalls	1.3.6.1.4.1.230.5.1.1.21	INTEGER	read-only	Number of succesful modem calls received by ITI.
INT nvNodestatRxavgpps	1.3.6.1.4.1.230.5.1.1.12	INTEGER	read-only	average rx packets per second average packets per second received during last 15 minute cycle Statistic is zeroed at startup time.
INT nvNodestatRxcurpps	1.3.6.1.4.1.230.5.1.1.13	INTEGER	read-only	current rx packets per second packets per second received during last 3 second cycle Statistic is zeroed at startup time
INT nvNodestatTotalbufs	1.3.6.1.4.1.230.5.1.1.1	INTEGER	read-only	total number of buffers in system - these buffers are freed at startup time to be allocated as needed. Statistic is zeroed at startup time.
INT nvNodestatTxavgpps	1.3.6.1.4.1.230.5.1.1.14	INTEGER	read-only	average tx packets per second average packets per second transmitted during last 15 minute cycle Statistic is zeroed at startup time.
INT nvNodestatTxcurpps	1.3.6.1.4.1.230.5.1.1.15	INTEGER	read-only	current tx packets per second packets per second transmitted during last 3 second cycle Statistic is zeroed at startup time.
INT nvNodestatX25call	1.3.6.1.4.1.230.5.1.1.16	INTEGER	read-only	Actual number of lcns allocated.
nvNsockconf	1.3.6.1.4.1.230.5.17.4
INT nvNsockconfDefport	1.3.6.1.4.1.230.5.17.4.3.1.4	INTEGER	read-write	default TCP port.
nvNsockconfEntry	1.3.6.1.4.1.230.5.17.4.3.1		not-accessible	tcpstat record, indexed by record number
INT nvNsockconfIndex	1.3.6.1.4.1.230.5.17.4.3.1.1	INTEGER	read-only	Index of nsockconf record
INT nvNsockconfMaxconn	1.3.6.1.4.1.230.5.17.4.3.1.2	INTEGER	read-write	Maximum number of connections.
INT nvNsockconfMaxRec	1.3.6.1.4.1.230.5.17.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvNsockconfNumRec	1.3.6.1.4.1.230.5.17.4.2	INTEGER	read-only	number of records in use.
INT nvNsockconfStatus	1.3.6.1.4.1.230.5.17.4.3.1.3	INTEGER	read-write	nsockconf record
nvNsockconfTable	1.3.6.1.4.1.230.5.17.4.3		not-accessible	tcpstat file.
nvNsockmap	1.3.6.1.4.1.230.5.17.5
nvNsockmapEntry	1.3.6.1.4.1.230.5.17.5.3.1		not-accessible	tcpstat record, indexed by record number
INT nvNsockmapIndex	1.3.6.1.4.1.230.5.17.5.3.1.1	INTEGER	read-only	Index of nsockconf record
STR nvNsockmapIpaddr	1.3.6.1.4.1.230.5.17.5.3.1.9	DisplayString	read-write	nsockconf record
INT nvNsockmapMaxRec	1.3.6.1.4.1.230.5.17.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvNsockmapMaxsessn	1.3.6.1.4.1.230.5.17.5.3.1.4	INTEGER	read-write	nsockconf record
INT nvNsockmapNbusport	1.3.6.1.4.1.230.5.17.5.3.1.5	INTEGER	read-write	nsockconf record
STR nvNsockmapNetaddr	1.3.6.1.4.1.230.5.17.5.3.1.6	DisplayString	read-write	nsockconf record
INT nvNsockmapNumRec	1.3.6.1.4.1.230.5.17.5.2	INTEGER	read-only	number of records in use.
INT nvNsockmapOrigin	1.3.6.1.4.1.230.5.17.5.3.1.2	INTEGER	read-write	nsockconf record
INT nvNsockmapService	1.3.6.1.4.1.230.5.17.5.3.1.3	INTEGER	read-write	nsockconf record
INT nvNsockmapStatus	1.3.6.1.4.1.230.5.17.5.3.1.10	INTEGER	read-write	nsockconf record
nvNsockmapTable	1.3.6.1.4.1.230.5.17.5.3		not-accessible	tcpstat file.
INT nvNsockmapTcpmsglen	1.3.6.1.4.1.230.5.17.5.3.1.11	INTEGER	read-write	type of header for tcp message
INT nvNsockmapTcpport	1.3.6.1.4.1.230.5.17.5.3.1.8	INTEGER	read-write	nsockconf record
STR nvNsockmapUserdata	1.3.6.1.4.1.230.5.17.5.3.1.7	DisplayString	read-write	nsockconf record
nvPosconf	1.3.6.1.4.1.230.5.66.2
INT nvPosconfEnable	1.3.6.1.4.1.230.5.66.2.3.1.3	INTEGER	read-write	Enabled or not.
nvPosconfEntry	1.3.6.1.4.1.230.5.66.2.3.1		not-accessible	Nevada node posprof record.
INT nvPosconfIndex	1.3.6.1.4.1.230.5.66.2.3.1.1	INTEGER	read-only	Index of nevada posconf record
INT nvPosconfMaxRec	1.3.6.1.4.1.230.5.66.2.1	INTEGER	read-only	total number of records allowed in database file.
STR nvPosconfName	1.3.6.1.4.1.230.5.66.2.3.1.2	DisplayString	read-write	either POS# or X.121 Address.
INT nvPosconfNumRec	1.3.6.1.4.1.230.5.66.2.2	INTEGER	read-only	number of records in use.
STR nvPosconfProfile	1.3.6.1.4.1.230.5.66.2.3.1.4	DisplayString	read-write	Name of profile (in posprof) being used.
INT nvPosconfStatus	1.3.6.1.4.1.230.5.66.2.3.1.5	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvPosconfTable	1.3.6.1.4.1.230.5.66.2.3		not-accessible	NEvada node posconf file.
nvPosiso	1.3.6.1.4.1.230.5.66.6
INT nvPosisoContrec	1.3.6.1.4.1.230.5.66.6.3.1.3	INTEGER	read-write	pointer to continuation record Default value is 0.
nvPosisoEntry	1.3.6.1.4.1.230.5.66.6.3.1		not-accessible	navada node posiso record.
NVI nvPosisoField10	1.3.6.1.4.1.230.5.66.6.3.1.12	NvIsoType	read-write	same as field1
NVI nvPosisoField11	1.3.6.1.4.1.230.5.66.6.3.1.13	NvIsoType	read-write	same as field1
NVI nvPosisoField12	1.3.6.1.4.1.230.5.66.6.3.1.14	NvIsoType	read-write	same as field1
NVI nvPosisoField13	1.3.6.1.4.1.230.5.66.6.3.1.15	NvIsoType	read-write	same as field1
NVI nvPosisoField14	1.3.6.1.4.1.230.5.66.6.3.1.16	NvIsoType	read-write	same as field1
NVI nvPosisoField15	1.3.6.1.4.1.230.5.66.6.3.1.17	NvIsoType	read-write	same as field1
NVI nvPosisoField16	1.3.6.1.4.1.230.5.66.6.3.1.18	NvIsoType	read-write	same as field1
NVI nvPosisoField17	1.3.6.1.4.1.230.5.66.6.3.1.19	NvIsoType	read-write	same as field1
NVI nvPosisoField18	1.3.6.1.4.1.230.5.66.6.3.1.20	NvIsoType	read-write	same as field1
NVI nvPosisoField19	1.3.6.1.4.1.230.5.66.6.3.1.21	NvIsoType	read-write	same as field1
NVI nvPosisoField2	1.3.6.1.4.1.230.5.66.6.3.1.4	NvIsoType	read-write	same as field1
NVI nvPosisoField20	1.3.6.1.4.1.230.5.66.6.3.1.22	NvIsoType	read-write	same as field1
NVI nvPosisoField21	1.3.6.1.4.1.230.5.66.6.3.1.23	NvIsoType	read-write	same as field1
NVI nvPosisoField22	1.3.6.1.4.1.230.5.66.6.3.1.24	NvIsoType	read-write	same as field1
NVI nvPosisoField23	1.3.6.1.4.1.230.5.66.6.3.1.25	NvIsoType	read-write	same as field1
NVI nvPosisoField24	1.3.6.1.4.1.230.5.66.6.3.1.26	NvIsoType	read-write	same as field1
NVI nvPosisoField25	1.3.6.1.4.1.230.5.66.6.3.1.27	NvIsoType	read-write	same as field1
NVI nvPosisoField26	1.3.6.1.4.1.230.5.66.6.3.1.28	NvIsoType	read-write	same as field1
NVI nvPosisoField27	1.3.6.1.4.1.230.5.66.6.3.1.29	NvIsoType	read-write	same as field1
NVI nvPosisoField28	1.3.6.1.4.1.230.5.66.6.3.1.30	NvIsoType	read-write	same as field1
NVI nvPosisoField29	1.3.6.1.4.1.230.5.66.6.3.1.31	NvIsoType	read-write	same as field1
NVI nvPosisoField3	1.3.6.1.4.1.230.5.66.6.3.1.5	NvIsoType	read-write	same as field1
NVI nvPosisoField30	1.3.6.1.4.1.230.5.66.6.3.1.32	NvIsoType	read-write	same as field1
NVI nvPosisoField31	1.3.6.1.4.1.230.5.66.6.3.1.33	NvIsoType	read-write	same as field1
NVI nvPosisoField32	1.3.6.1.4.1.230.5.66.6.3.1.34	NvIsoType	read-write	same as field1
NVI nvPosisoField33	1.3.6.1.4.1.230.5.66.6.3.1.35	NvIsoType	read-write	same as field1
NVI nvPosisoField34	1.3.6.1.4.1.230.5.66.6.3.1.36	NvIsoType	read-write	same as field1
NVI nvPosisoField35	1.3.6.1.4.1.230.5.66.6.3.1.37	NvIsoType	read-write	same as field1
NVI nvPosisoField36	1.3.6.1.4.1.230.5.66.6.3.1.38	NvIsoType	read-write	same as field1
NVI nvPosisoField37	1.3.6.1.4.1.230.5.66.6.3.1.39	NvIsoType	read-write	same as field1
NVI nvPosisoField38	1.3.6.1.4.1.230.5.66.6.3.1.40	NvIsoType	read-write	same as field1
NVI nvPosisoField39	1.3.6.1.4.1.230.5.66.6.3.1.41	NvIsoType	read-write	same as field1
NVI nvPosisoField4	1.3.6.1.4.1.230.5.66.6.3.1.6	NvIsoType	read-write	same as field1
NVI nvPosisoField40	1.3.6.1.4.1.230.5.66.6.3.1.42	NvIsoType	read-write	same as field1
NVI nvPosisoField41	1.3.6.1.4.1.230.5.66.6.3.1.43	NvIsoType	read-write	same as field1
NVI nvPosisoField42	1.3.6.1.4.1.230.5.66.6.3.1.44	NvIsoType	read-write	same as field1
NVI nvPosisoField43	1.3.6.1.4.1.230.5.66.6.3.1.45	NvIsoType	read-write	same as field1
NVI nvPosisoField44	1.3.6.1.4.1.230.5.66.6.3.1.46	NvIsoType	read-write	same as field1
NVI nvPosisoField45	1.3.6.1.4.1.230.5.66.6.3.1.47	NvIsoType	read-write	same as field1
NVI nvPosisoField46	1.3.6.1.4.1.230.5.66.6.3.1.48	NvIsoType	read-write	same as field1
NVI nvPosisoField47	1.3.6.1.4.1.230.5.66.6.3.1.49	NvIsoType	read-write	same as field1
NVI nvPosisoField48	1.3.6.1.4.1.230.5.66.6.3.1.50	NvIsoType	read-write	same as field1
NVI nvPosisoField49	1.3.6.1.4.1.230.5.66.6.3.1.51	NvIsoType	read-write	same as field1
NVI nvPosisoField5	1.3.6.1.4.1.230.5.66.6.3.1.7	NvIsoType	read-write	same as field1
NVI nvPosisoField50	1.3.6.1.4.1.230.5.66.6.3.1.52	NvIsoType	read-write	same as field1
NVI nvPosisoField51	1.3.6.1.4.1.230.5.66.6.3.1.53	NvIsoType	read-write	same as field1
NVI nvPosisoField52	1.3.6.1.4.1.230.5.66.6.3.1.54	NvIsoType	read-write	same as field1
NVI nvPosisoField53	1.3.6.1.4.1.230.5.66.6.3.1.55	NvIsoType	read-write	same as field1
NVI nvPosisoField54	1.3.6.1.4.1.230.5.66.6.3.1.56	NvIsoType	read-write	same as field1
NVI nvPosisoField55	1.3.6.1.4.1.230.5.66.6.3.1.57	NvIsoType	read-write	same as field1
NVI nvPosisoField56	1.3.6.1.4.1.230.5.66.6.3.1.58	NvIsoType	read-write	same as field1
NVI nvPosisoField57	1.3.6.1.4.1.230.5.66.6.3.1.59	NvIsoType	read-write	same as field1
NVI nvPosisoField58	1.3.6.1.4.1.230.5.66.6.3.1.60	NvIsoType	read-write	same as field1
NVI nvPosisoField59	1.3.6.1.4.1.230.5.66.6.3.1.61	NvIsoType	read-write	same as field1
NVI nvPosisoField6	1.3.6.1.4.1.230.5.66.6.3.1.8	NvIsoType	read-write	same as field1
NVI nvPosisoField60	1.3.6.1.4.1.230.5.66.6.3.1.62	NvIsoType	read-write	same as field1
NVI nvPosisoField61	1.3.6.1.4.1.230.5.66.6.3.1.63	NvIsoType	read-write	same as field1
NVI nvPosisoField62	1.3.6.1.4.1.230.5.66.6.3.1.64	NvIsoType	read-write	same as field1
NVI nvPosisoField63	1.3.6.1.4.1.230.5.66.6.3.1.65	NvIsoType	read-write	same as field1
NVI nvPosisoField64	1.3.6.1.4.1.230.5.66.6.3.1.66	NvIsoType	read-write	same as field1
NVI nvPosisoField7	1.3.6.1.4.1.230.5.66.6.3.1.9	NvIsoType	read-write	same as field1
NVI nvPosisoField8	1.3.6.1.4.1.230.5.66.6.3.1.10	NvIsoType	read-write	same as field1
NVI nvPosisoField9	1.3.6.1.4.1.230.5.66.6.3.1.11	NvIsoType	read-write	same as field1
INT nvPosisoIndex	1.3.6.1.4.1.230.5.66.6.3.1.1	INTEGER	read-only	Index of Nevada posiso record
INT nvPosisoMaxRec	1.3.6.1.4.1.230.5.66.6.1	INTEGER	read-only	total number of records allowed in database file.
STR nvPosisoName	1.3.6.1.4.1.230.5.66.6.3.1.2	DisplayString	read-write	used to identify record
INT nvPosisoNumRec	1.3.6.1.4.1.230.5.66.6.2	INTEGER	read-only	number of records in use.
INT nvPosisoStatus	1.3.6.1.4.1.230.5.66.6.3.1.67	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvPosisoTable	1.3.6.1.4.1.230.5.66.6.3		not-accessible	nevada node posiso file.
nvPosmsgmap	1.3.6.1.4.1.230.5.66.3
STR nvPosmsgmapDest	1.3.6.1.4.1.230.5.66.3.3.1.3	DisplayString	read-write	port/link or X.121 address
nvPosmsgmapEntry	1.3.6.1.4.1.230.5.66.3.3.1		not-accessible	nevada node posmsgmap record.
INT nvPosmsgmapIndex	1.3.6.1.4.1.230.5.66.3.3.1.1	INTEGER	read-only	Index of nevada posmsgmap record
INT nvPosmsgmapMaxRec	1.3.6.1.4.1.230.5.66.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPosmsgmapNumRec	1.3.6.1.4.1.230.5.66.3.2	INTEGER	read-only	number of records in use.
INT nvPosmsgmapPattern	1.3.6.1.4.1.230.5.66.3.3.1.2	INTEGER	read-write	pointer to pattern in string storage
INT nvPosmsgmapStatus	1.3.6.1.4.1.230.5.66.3.3.1.4	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvPosmsgmapTable	1.3.6.1.4.1.230.5.66.3.3		not-accessible	Nevada node posmsgmap file.
nvPosniimap	1.3.6.1.4.1.230.5.66.4
STR nvPosniimapDest	1.3.6.1.4.1.230.5.66.4.3.1.3	DisplayString	read-write	port/link or X.121 address
nvPosniimapEntry	1.3.6.1.4.1.230.5.66.4.3.1		not-accessible	Nevada node posniimap record.
INT nvPosniimapIndex	1.3.6.1.4.1.230.5.66.4.3.1.1	INTEGER	read-only	Index of nevada posniimap record
INT nvPosniimapMaxRec	1.3.6.1.4.1.230.5.66.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPosniimapNumRec	1.3.6.1.4.1.230.5.66.4.2	INTEGER	read-only	number of records in use.
INT nvPosniimapStatus	1.3.6.1.4.1.230.5.66.4.3.1.4	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvPosniimapTable	1.3.6.1.4.1.230.5.66.4.3		not-accessible	nevada node posniimap file.
STR nvPosniimapTpduaddr	1.3.6.1.4.1.230.5.66.4.3.1.2	DisplayString	read-write	NII value to match
nvPosnmsmap	1.3.6.1.4.1.230.5.66.5
STR nvPosnmsmapDest	1.3.6.1.4.1.230.5.66.5.3.1.3	DisplayString	read-write	port/link or X.121 address
nvPosnmsmapEntry	1.3.6.1.4.1.230.5.66.5.3.1		not-accessible	nevada node posnmsmap record.
INT nvPosnmsmapIndex	1.3.6.1.4.1.230.5.66.5.3.1.1	INTEGER	read-only	Index of nevada posnmsmap record
INT nvPosnmsmapMaxRec	1.3.6.1.4.1.230.5.66.5.1	INTEGER	read-only	total number of records allowed in database file.
STR nvPosnmsmapNmsid	1.3.6.1.4.1.230.5.66.5.3.1.2	DisplayString	read-write	two digit hex NMS ID
INT nvPosnmsmapNumRec	1.3.6.1.4.1.230.5.66.5.2	INTEGER	read-only	number of records in use.
INT nvPosnmsmapStatus	1.3.6.1.4.1.230.5.66.5.3.1.4	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvPosnmsmapTable	1.3.6.1.4.1.230.5.66.5.3		not-accessible	nevada node posnmsmap file.
nvPosprof	1.3.6.1.4.1.230.5.66.1
INT nvPosprofActsupl	1.3.6.1.4.1.230.5.66.1.3.1.19	INTEGER	read-write	Action after responce is sent to terminal.
INT nvPosprofAddrtype	1.3.6.1.4.1.230.5.66.1.3.1.9	INTEGER	read-write	address header Default value is tpdu.
INT nvPosprofDirection	1.3.6.1.4.1.230.5.66.1.3.1.7	INTEGER	read-write	up or down? Default value is dnlink (1+1).
INT nvPosprofEftrspto	1.3.6.1.4.1.230.5.66.1.3.1.16	INTEGER	read-write	number of seconds before addr table entry cleared Default value is 300.
nvPosprofEntry	1.3.6.1.4.1.230.5.66.1.3.1		not-accessible	Nevada node posprof record.
INT nvPosprofIdletime	1.3.6.1.4.1.230.5.66.1.3.1.12	INTEGER	read-write	max num secs channel can remain idle
INT nvPosprofIndex	1.3.6.1.4.1.230.5.66.1.3.1.1	INTEGER	read-only	Index of nevada posprof record
INT nvPosprofMaxRec	1.3.6.1.4.1.230.5.66.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPosprofMode	1.3.6.1.4.1.230.5.66.1.3.1.11	INTEGER	read-write	Mode of operation. Default is 7E1.
STR nvPosprofName	1.3.6.1.4.1.230.5.66.1.3.1.2	DisplayString	read-write	Profile Name.
INT nvPosprofNretry	1.3.6.1.4.1.230.5.66.1.3.1.18	INTEGER	read-write	max retry attempts Default value is 3.
INT nvPosprofNumchan	1.3.6.1.4.1.230.5.66.1.3.1.4	INTEGER	read-write	max number of channels Default value is 1.
INT nvPosprofNumRec	1.3.6.1.4.1.230.5.66.1.2	INTEGER	read-only	number of records in use.
INT nvPosprofPermchan	1.3.6.1.4.1.230.5.66.1.3.1.6	INTEGER	read-write	min number of channels
STR nvPosprofPolladdr	1.3.6.1.4.1.230.5.66.1.3.1.22	DisplayString	read-write	base poll address,hex
INT nvPosprofPolltim	1.3.6.1.4.1.230.5.66.1.3.1.21	INTEGER	read-write	poll timer Default value is 5.
STR nvPosprofPortname	1.3.6.1.4.1.230.5.66.1.3.1.25	DisplayString	read-write	Name of physical port or Device Usage Group.
INT nvPosprofProtocol	1.3.6.1.4.1.230.5.66.1.3.1.8	INTEGER	read-write	protocol on port Default value is visa.
INT nvPosprofResptim	1.3.6.1.4.1.230.5.66.1.3.1.20	INTEGER	read-write	host response timer Default value is 100.
INT nvPosprofRetrytim	1.3.6.1.4.1.230.5.66.1.3.1.17	INTEGER	read-write	retry timer Default value is 100.
INT nvPosprofRouting	1.3.6.1.4.1.230.5.66.1.3.1.13	INTEGER	read-write	look at data or tpdu? Default value is tpdurtg (1+1).
STR nvPosprofRsrcpool	1.3.6.1.4.1.230.5.66.1.3.1.26	DisplayString	read-write	Resource Pool Name.
INT nvPosprofSize	1.3.6.1.4.1.230.5.66.1.3.1.3	INTEGER	read-write	max bytes per frame Default value is 128 (0+1).
INT nvPosprofSkip	1.3.6.1.4.1.230.5.66.1.3.1.23	INTEGER	read-write	number of cycles to skip for non-func device Default value is 4.
INT nvPosprofStatus	1.3.6.1.4.1.230.5.66.1.3.1.27	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvPosprofTable	1.3.6.1.4.1.230.5.66.1.3		not-accessible	NEvada node posprof file.
INT nvPosprofTcpmsglen	1.3.6.1.4.1.230.5.66.1.3.1.24	INTEGER	read-write	TCP msg header format. Default value is bin4.
STR nvPosprofTpduaddr	1.3.6.1.4.1.230.5.66.1.3.1.15	DisplayString	read-write	use this when tpdu not supplied (but required).
INT nvPosprofTranslate	1.3.6.1.4.1.230.5.66.1.3.1.14	INTEGER	read-write	message translation.
STR nvPosprofUserdata	1.3.6.1.4.1.230.5.66.1.3.1.10	DisplayString	read-write	call user data
nvPosstat	1.3.6.1.4.1.230.5.66.8
INT nvPosstatCommfail	1.3.6.1.4.1.230.5.66.8.3.1.18	INTEGER	read-only	EFT reqs that couldn't be delivered due to comm failure Statistic is zeroed at startup time.
INT nvPosstatConnfail	1.3.6.1.4.1.230.5.66.8.3.1.22	INTEGER	read-only	EFT requests lost because of connection failures Statistic is zeroed at startup time.
INT nvPosstatDnlnkfail	1.3.6.1.4.1.230.5.66.8.3.1.20	INTEGER	read-only	EFT rsps discarded because they did not match any request Statistic is zeroed at startup time.
STR nvPosstatDtreset	1.3.6.1.4.1.230.5.66.8.3.1.28	DisplayString	read-only	date & time statistics last reset
INT nvPosstatEftreqs	1.3.6.1.4.1.230.5.66.8.3.1.9	INTEGER	read-only	number of EFT requests Statistic is zeroed at startup time.
INT nvPosstatEftrsps	1.3.6.1.4.1.230.5.66.8.3.1.10	INTEGER	read-only	number of EFT responses Statistic is zeroed at startup time.
nvPosstatEntry	1.3.6.1.4.1.230.5.66.8.3.1		not-accessible	Nevada node posstat record.
INT nvPosstatIndex	1.3.6.1.4.1.230.5.66.8.3.1.1	INTEGER	read-only	Index of Nevada posstat record
INT nvPosstatInvrqtpdu	1.3.6.1.4.1.230.5.66.8.3.1.15	INTEGER	read-only	EFT reqs discarded because of bad TPDUs Statistic is zeroed at startup time.
INT nvPosstatInvrstpdu	1.3.6.1.4.1.230.5.66.8.3.1.19	INTEGER	read-only	EFT rsps discarded because they did not contain valid TPDUs Statistic is zeroed at startup time.
INT nvPosstatMaxRec	1.3.6.1.4.1.230.5.66.8.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPosstatNactivchn	1.3.6.1.4.1.230.5.66.8.3.1.3	INTEGER	read-only	number of active channels Initial status is 0.
STR nvPosstatName	1.3.6.1.4.1.230.5.66.8.3.1.2	DisplayString	read-only	port/link or X.121 address (matches posconf)
INT nvPosstatNbadframes	1.3.6.1.4.1.230.5.66.8.3.1.26	INTEGER	read-only	NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time.
INT nvPosstatNfailcall	1.3.6.1.4.1.230.5.66.8.3.1.6	INTEGER	read-only	number of failed calls Statistic is zeroed at startup time.
INT nvPosstatNmsbaddst	1.3.6.1.4.1.230.5.66.8.3.1.24	INTEGER	read-only	NMS reqs with bad destination addresses Statistic is zeroed at startup time.
INT nvPosstatNmsbadhst	1.3.6.1.4.1.230.5.66.8.3.1.25	INTEGER	read-only	NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time.
INT nvPosstatNmsreqs	1.3.6.1.4.1.230.5.66.8.3.1.11	INTEGER	read-only	number of NMS requests Statistic is zeroed at startup time.
INT nvPosstatNmsrsps	1.3.6.1.4.1.230.5.66.8.3.1.12	INTEGER	read-only	number of NMS responses Statistic is zeroed at startup time.
INT nvPosstatNodatart	1.3.6.1.4.1.230.5.66.8.3.1.13	INTEGER	read-only	EFT reqs discarded becaues msg switch could find route Statistic is zeroed at startup time.
INT nvPosstatNotpdurt	1.3.6.1.4.1.230.5.66.8.3.1.14	INTEGER	read-only	EFT reqs discarded because no match to posniimap entry Statistic is zeroed at startup time.
INT nvPosstatNousdest	1.3.6.1.4.1.230.5.66.8.3.1.16	INTEGER	read-only	EFT reqs discarded because destination couldn't be matched Statistic is zeroed at startup time.
INT nvPosstatNtoolong	1.3.6.1.4.1.230.5.66.8.3.1.27	INTEGER	read-only	NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time.
INT nvPosstatNumcalls	1.3.6.1.4.1.230.5.66.8.3.1.5	INTEGER	read-only	number of calls Statistic is zeroed at startup time.
INT nvPosstatNumimsgs	1.3.6.1.4.1.230.5.66.8.3.1.7	INTEGER	read-only	number of messages from device Statistic is zeroed at startup time.
INT nvPosstatNumomsgs	1.3.6.1.4.1.230.5.66.8.3.1.8	INTEGER	read-only	number of messages to device Statistic is zeroed at startup time.
INT nvPosstatNumRec	1.3.6.1.4.1.230.5.66.8.2	INTEGER	read-only	number of records in use.
INT nvPosstatProtocol	1.3.6.1.4.1.230.5.66.8.3.1.4	INTEGER	read-only	protocol on port
INT nvPosstatQueued	1.3.6.1.4.1.230.5.66.8.3.1.17	INTEGER	read-only	EFT reqs discarded because all dest channels or TDPU IDs in use Statistic is zeroed at startup time.
INT nvPosstatRspnomtch	1.3.6.1.4.1.230.5.66.8.3.1.21	INTEGER	read-only	EFT rsps discarded because they did not match any request Statistic is zeroed at startup time.
INT nvPosstatRsptimout	1.3.6.1.4.1.230.5.66.8.3.1.23	INTEGER	read-only	EFT rsps (map table entries) that were timed out (response lost) Statistic is zeroed at startup time.
nvPosstatTable	1.3.6.1.4.1.230.5.66.8.3		not-accessible	Nevada node posstat file.
nvPosvisa	1.3.6.1.4.1.230.5.66.7
nvPosvisaEntry	1.3.6.1.4.1.230.5.66.7.3.1		not-accessible	Nevada node posvisa record.
NVV nvPosvisaField1	1.3.6.1.4.1.230.5.66.7.3.1.3	NvVisaType	read-write	description of a single field
NVV nvPosvisaField10	1.3.6.1.4.1.230.5.66.7.3.1.12	NvVisaType	read-write	same as field1
NVV nvPosvisaField11	1.3.6.1.4.1.230.5.66.7.3.1.13	NvVisaType	read-write	same as field1
NVV nvPosvisaField12	1.3.6.1.4.1.230.5.66.7.3.1.14	NvVisaType	read-write	same as field1
NVV nvPosvisaField13	1.3.6.1.4.1.230.5.66.7.3.1.15	NvVisaType	read-write	same as field1
NVV nvPosvisaField14	1.3.6.1.4.1.230.5.66.7.3.1.16	NvVisaType	read-write	same as field1
NVV nvPosvisaField15	1.3.6.1.4.1.230.5.66.7.3.1.17	NvVisaType	read-write	same as field1
NVV nvPosvisaField16	1.3.6.1.4.1.230.5.66.7.3.1.18	NvVisaType	read-write	same as field1
NVV nvPosvisaField17	1.3.6.1.4.1.230.5.66.7.3.1.19	NvVisaType	read-write	same as field1
NVV nvPosvisaField18	1.3.6.1.4.1.230.5.66.7.3.1.20	NvVisaType	read-write	same as field1
NVV nvPosvisaField19	1.3.6.1.4.1.230.5.66.7.3.1.21	NvVisaType	read-write	same as field1
NVV nvPosvisaField2	1.3.6.1.4.1.230.5.66.7.3.1.4	NvVisaType	read-write	same as field1
NVV nvPosvisaField20	1.3.6.1.4.1.230.5.66.7.3.1.22	NvVisaType	read-write	same as field1
NVV nvPosvisaField3	1.3.6.1.4.1.230.5.66.7.3.1.5	NvVisaType	read-write	same as field1
NVV nvPosvisaField4	1.3.6.1.4.1.230.5.66.7.3.1.6	NvVisaType	read-write	same as field1
NVV nvPosvisaField5	1.3.6.1.4.1.230.5.66.7.3.1.7	NvVisaType	read-write	same as field1
NVV nvPosvisaField6	1.3.6.1.4.1.230.5.66.7.3.1.8	NvVisaType	read-write	same as field1
NVV nvPosvisaField7	1.3.6.1.4.1.230.5.66.7.3.1.9	NvVisaType	read-write	same as field1
NVV nvPosvisaField8	1.3.6.1.4.1.230.5.66.7.3.1.10	NvVisaType	read-write	same as field1
NVV nvPosvisaField9	1.3.6.1.4.1.230.5.66.7.3.1.11	NvVisaType	read-write	same as field1
INT nvPosvisaIndex	1.3.6.1.4.1.230.5.66.7.3.1.1	INTEGER	read-only	Index of Nevada posvisa record
INT nvPosvisaMaxRec	1.3.6.1.4.1.230.5.66.7.1	INTEGER	read-only	total number of records allowed in database file.
STR nvPosvisaName	1.3.6.1.4.1.230.5.66.7.3.1.2	DisplayString	read-write	used to identify record
INT nvPosvisaNumRec	1.3.6.1.4.1.230.5.66.7.2	INTEGER	read-only	number of records in use.
INT nvPosvisaStatus	1.3.6.1.4.1.230.5.66.7.3.1.23	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvPosvisaTable	1.3.6.1.4.1.230.5.66.7.3		not-accessible	Nevada node posvisa file.
NTF nvPppIpcpOnLcpDown	1.3.6.1.4.1.230.5.2.1.0.14851			Probable Cause The IP Control Protocol (IPCP) has gone down. Probable Effect The Network Layer Protocol is not selected and datagrams can not be sent. Recommended Action Refer PPP statfile pppstat.
nvPppstat	1.3.6.1.4.1.230.5.12.1
INT nvPppstatBundleId	1.3.6.1.4.1.230.5.12.1.3.1.23	INTEGER	read-only	Bundle identifier (mpstat record id) of multilink PPP bundle in which this link is being used if nvPppstatMultilink is yes (bundleid).
INT nvPppstatCallId	1.3.6.1.4.1.230.5.12.1.3.1.30	INTEGER	read-only	Call ID assosiated with the tunneled session.
INT nvPppstatCcpOperS	1.3.6.1.4.1.230.5.12.1.3.1.26	INTEGER	read-only	ccp Operation status.
INT nvPppstatComprot	1.3.6.1.4.1.230.5.12.1.3.1.27	INTEGER	read-write	Compression protocol in use.
STR nvPppstatDtreset	1.3.6.1.4.1.230.5.12.1.3.1.34	DisplayString	read-only	date & time statistics last reset
nvPppstatEntry	1.3.6.1.4.1.230.5.12.1.3.1		not-accessible	pppstat record.
CTR nvPppstatInCmPcnt	1.3.6.1.4.1.230.5.12.1.3.1.32	Counter	read-only	Percent compression on rx.
INT nvPppstatIndex	1.3.6.1.4.1.230.5.12.1.3.1.1	INTEGER	read-only	Index of pppstat record
CTR nvPppstatInDiscard	1.3.6.1.4.1.230.5.12.1.3.1.8	Counter	read-only	discarded good packets (InDiscard) The total number of good frames dicarded due to lack of buffers Statistic is zeroed at startup time.
CTR nvPppstatInDiscRq	1.3.6.1.4.1.230.5.12.1.3.1.12	Counter	read-only	discard requests Rxed (InDiscRq) The number of discard request packets received. Statistic is zeroed at startup time.
CTR nvPppstatInEch	1.3.6.1.4.1.230.5.12.1.3.1.10	Counter	read-only	received echo requests (InEch) The number of echo request packets recieved. Statistic is zeroed at startup time.
CTR nvPppstatInEchRp	1.3.6.1.4.1.230.5.12.1.3.1.11	Counter	read-only	echo reply received (InEchRp) The num of packets Rxed due to the echo-req sent (software loopback) Statistic is zeroed at startup time.
CTR nvPppstatInError	1.3.6.1.4.1.230.5.12.1.3.1.9	Counter	read-only	Bad packets received (InError) The total number of frames received due to crc,format etc. Statistic is zeroed at startup time.
CTR nvPppstatInOctets	1.3.6.1.4.1.230.5.12.1.3.1.6	Counter	read-only	Octets received (InOctets) The number of good data bytes received Statistic is zeroed at startup time.
CTR nvPppstatInPkts	1.3.6.1.4.1.230.5.12.1.3.1.7	Counter	read-only	good packets received (InPkts) The number of good received frames Statistic is zeroed at startup time.
STR nvPppstatIpAddr	1.3.6.1.4.1.230.5.12.1.3.1.22	DisplayString	read-only	IP address in use on this PPP link (ipaddr).
INT nvPppstatIpcp	1.3.6.1.4.1.230.5.12.1.3.1.24	INTEGER	read-only	ipcp record number used for this link.
INT nvPppstatIpcpOperS	1.3.6.1.4.1.230.5.12.1.3.1.5	INTEGER	read-only	ipcp operation status (ipcpOperS) ipcp link status down/up.
INT nvPppstatLcpOperS	1.3.6.1.4.1.230.5.12.1.3.1.4	INTEGER	read-only	lcp operation status (lcpOperS) lcp link Admin Status down/up.
INT nvPppstatMaxRec	1.3.6.1.4.1.230.5.12.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPppstatMultilink	1.3.6.1.4.1.230.5.12.1.3.1.25	INTEGER	read-only	Set to yes if this LCP is in use in a multilink bundle.
STR nvPppstatName	1.3.6.1.4.1.230.5.12.1.3.1.2	DisplayString	read-only	statistics Name (name) statistics name and number (ie,'ps1')
INT nvPppstatNumRec	1.3.6.1.4.1.230.5.12.1.2	INTEGER	read-only	number of records in use.
CTR nvPppstatOutCmPcnt	1.3.6.1.4.1.230.5.12.1.3.1.31	Counter	read-only	Percent compression on tx.
CTR nvPppstatOutDiscrd	1.3.6.1.4.1.230.5.12.1.3.1.16	Counter	read-only	output errors (OutDiscrd) The number of outbound pkts droped due to lack of buffers. Statistic is zeroed at startup time.
CTR nvPppstatOutDiscRq	1.3.6.1.4.1.230.5.12.1.3.1.20	Counter	read-only	discard requests Txed (OutDiscRq) The number of discard request packets received. Statistic is zeroed at startup time.
CTR nvPppstatOutEch	1.3.6.1.4.1.230.5.12.1.3.1.18	Counter	read-only	echo request pkts transmitted (OutEch) The number of lcp echo request packets transmitted Statistic is zeroed at startup time.
CTR nvPppstatOutEchRp	1.3.6.1.4.1.230.5.12.1.3.1.19	Counter	read-only	echo reply transmitted (OutEchRp) The num of echo reply packets Txed due to the echo-req Statistic is zeroed at startup time.
CTR nvPppstatOutErrors	1.3.6.1.4.1.230.5.12.1.3.1.17	Counter	read-only	output errors (OutErrors) The number of outbound pkts could not be txed due to errors. Statistic is zeroed at startup time.
CTR nvPppstatOutExpnds	1.3.6.1.4.1.230.5.12.1.3.1.33	Counter	read-only	Number of packets expanded by compression.
CTR nvPppstatOutOctets	1.3.6.1.4.1.230.5.12.1.3.1.14	Counter	read-only	Octets transmitted (OutOctets) The number of bytes transmitted on the ppp link. Statistic is zeroed at startup time.
CTR nvPppstatOutPkts	1.3.6.1.4.1.230.5.12.1.3.1.15	Counter	read-only	Packets transmitted (OutPkts) The number of pakets transmitted on the PPP link. Statistic is zeroed at startup time.
INT nvPppstatPppAdminS	1.3.6.1.4.1.230.5.12.1.3.1.3	INTEGER	read-only	ppp admin status (pppAdminS) lcp link Admin Status down/up.
STR nvPppstatRealm	1.3.6.1.4.1.230.5.12.1.3.1.35	DisplayString	read-only	First 64 characters of the realm if parsing NAI.
nvPppstatTable	1.3.6.1.4.1.230.5.12.1.3		not-accessible	pppstat file.
INT nvPppstatTnnlId	1.3.6.1.4.1.230.5.12.1.3.1.29	INTEGER	read-only	Tunnel ID assosiated with the tunneled session.
INT nvPppstatTnnlState	1.3.6.1.4.1.230.5.12.1.3.1.28	INTEGER	read-only	State of a tunneled session.
CTR nvPppstatUnKnwnPr	1.3.6.1.4.1.230.5.12.1.3.1.13	Counter	read-only	rxed Unknown protocol (UnKnwnPr) The number of link quality reports received on this PPP link Statistic is zeroed at startup time.
STR nvPppstatUserName	1.3.6.1.4.1.230.5.12.1.3.1.21	DisplayString	read-only	authenticated username of remote user (username).
nvPriconf	1.3.6.1.4.1.230.5.11.1
INT nvPriconfBusyout	1.3.6.1.4.1.230.5.11.1.3.1.10	INTEGER	read-write	specifies whether new calls should be rejected.
INT nvPriconfDchrst	1.3.6.1.4.1.230.5.11.1.3.1.13	INTEGER	read-write	Added T1/E1 L1/L2 recovery
STR nvPriconfDliname	1.3.6.1.4.1.230.5.11.1.3.1.6	DisplayString	read-write	DLI name.
INT nvPriconfDlirst	1.3.6.1.4.1.230.5.11.1.3.1.12	INTEGER	read-write	Added T1/E1 L1/L2 recovery
INT nvPriconfDsltype	1.3.6.1.4.1.230.5.11.1.3.1.4	INTEGER	read-write	DSL type.
nvPriconfEntry	1.3.6.1.4.1.230.5.11.1.3.1		not-accessible	priconf record, indexed by record number
INT nvPriconfEstlink	1.3.6.1.4.1.230.5.11.1.3.1.11	INTEGER	read-write	Added T1/E1 L1/L2 recovery
INT nvPriconfIndex	1.3.6.1.4.1.230.5.11.1.3.1.1	INTEGER	read-only	Index of priconf record.
INT nvPriconfL1prot	1.3.6.1.4.1.230.5.11.1.3.1.22	INTEGER	read-write	L1 protocol enabled.
INT nvPriconfMaxRec	1.3.6.1.4.1.230.5.11.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPriconfModemcap	1.3.6.1.4.1.230.5.11.1.3.1.21	INTEGER	read-write	Speech or audio(3.1 or 7 kHz).
INT nvPriconfNfasdch	1.3.6.1.4.1.230.5.11.1.3.1.14	INTEGER	read-write	NFAS type primary or backup 1- No NFAS interface configured 2- Primary NFAS interface 3- Secondary NFAS interface
INT nvPriconfNfasgrp	1.3.6.1.4.1.230.5.11.1.3.1.16	INTEGER	read-write	NFAS group numbers
INT nvPriconfNfasif	1.3.6.1.4.1.230.5.11.1.3.1.15	INTEGER	read-write	NFAS Interface numbers
INT nvPriconfNumbplan	1.3.6.1.4.1.230.5.11.1.3.1.20	INTEGER	read-write	Numbering plan.
INT nvPriconfNumbtype	1.3.6.1.4.1.230.5.11.1.3.1.19	INTEGER	read-write	Type of Number.
INT nvPriconfNumRec	1.3.6.1.4.1.230.5.11.1.2	INTEGER	read-only	number of records in use.
INT nvPriconfPriname	1.3.6.1.4.1.230.5.11.1.3.1.2	INTEGER	read-only	PRI name.
INT nvPriconfRouting	1.3.6.1.4.1.230.5.11.1.3.1.5	INTEGER	read-write	Routing address.
STR nvPriconfRsrcpool	1.3.6.1.4.1.230.5.11.1.3.1.7	DisplayString	read-write	B channel pool name.
INT nvPriconfStandby	1.3.6.1.4.1.230.5.11.1.3.1.23	INTEGER	read-write	standby enabled.
INT nvPriconfStatus	1.3.6.1.4.1.230.5.11.1.3.1.9	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
INT nvPriconfSwitch	1.3.6.1.4.1.230.5.11.1.3.1.3	INTEGER	read-write	Switch type.
nvPriconfTable	1.3.6.1.4.1.230.5.11.1.3		not-accessible	priconf file.
INT nvPriconfTsshift	1.3.6.1.4.1.230.5.11.1.3.1.17	INTEGER	read-write	Run T1 timeslot format on E1 lines
INT nvPriconfX25diags	1.3.6.1.4.1.230.5.11.1.3.1.18	INTEGER	read-write	String defining X.25 diagnostic lookup table
nvPricstat	1.3.6.1.4.1.230.5.11.3
STR nvPricstatBchanl	1.3.6.1.4.1.230.5.11.3.3.1.12	DisplayString	read-only	B channel used.
INT nvPricstatCalldir	1.3.6.1.4.1.230.5.11.3.3.1.7	INTEGER	read-only	call direction.
STR nvPricstatCalledno	1.3.6.1.4.1.230.5.11.3.3.1.11	DisplayString	read-only	Called number.
STR nvPricstatCallid	1.3.6.1.4.1.230.5.11.3.3.1.3	DisplayString	read-only	Call ID number.
STR nvPricstatCallingno	1.3.6.1.4.1.230.5.11.3.3.1.10	DisplayString	read-only	Calling number.
INT nvPricstatContype	1.3.6.1.4.1.230.5.11.3.3.1.8	INTEGER	read-only	connectuon type.
nvPricstatEntry	1.3.6.1.4.1.230.5.11.3.3.1		not-accessible	pricstat record, indexed by record number
INT nvPricstatIndex	1.3.6.1.4.1.230.5.11.3.3.1.1	INTEGER	read-only	Index of pricstat record.
INT nvPricstatL1prot	1.3.6.1.4.1.230.5.11.3.3.1.9	INTEGER	read-only	layer 1 protocol.
INT nvPricstatMaxRec	1.3.6.1.4.1.230.5.11.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPricstatNumRec	1.3.6.1.4.1.230.5.11.3.2	INTEGER	read-only	number of records in use.
INT nvPricstatPriname	1.3.6.1.4.1.230.5.11.3.3.1.6	INTEGER	read-only	PRI interface name.
STR nvPricstatRate	1.3.6.1.4.1.230.5.11.3.3.1.4	DisplayString	read-only	data rate used.
INT nvPricstatSeqno	1.3.6.1.4.1.230.5.11.3.3.1.2	INTEGER	read-only	sequence number.
INT nvPricstatState	1.3.6.1.4.1.230.5.11.3.3.1.5	INTEGER	read-only	channel state.
nvPricstatTable	1.3.6.1.4.1.230.5.11.3.3		not-accessible	pricstat file.
nvPricuconf	1.3.6.1.4.1.230.5.11.5
nvPricuconfEntry	1.3.6.1.4.1.230.5.11.5.3.1		not-accessible	pricuconf record, indexed by record number
INT nvPricuconfIndex	1.3.6.1.4.1.230.5.11.5.3.1.1	INTEGER	read-only	Index of pricuconf record.
INT nvPricuconfInterval	1.3.6.1.4.1.230.5.11.5.3.1.6	INTEGER	read-write	Time period.
INT nvPricuconfMaxRec	1.3.6.1.4.1.230.5.11.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPricuconfNumRec	1.3.6.1.4.1.230.5.11.5.2	INTEGER	read-only	number of records in use.
INT nvPricuconfStatus	1.3.6.1.4.1.230.5.11.5.3.1.7	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvPricuconfTable	1.3.6.1.4.1.230.5.11.5.3		not-accessible	pricuconf file.
INT nvPricuconfThresh1	1.3.6.1.4.1.230.5.11.5.3.1.2	INTEGER	read-write	Threshold.
INT nvPricuconfThresh2	1.3.6.1.4.1.230.5.11.5.3.1.3	INTEGER	read-write	Threshold.
INT nvPricuconfThresh3	1.3.6.1.4.1.230.5.11.5.3.1.4	INTEGER	read-write	Threshold.
INT nvPricuconfThresh4	1.3.6.1.4.1.230.5.11.5.3.1.5	INTEGER	read-write	Threshold.
nvPricustat	1.3.6.1.4.1.230.5.11.6
INT nvPricustatCounter1	1.3.6.1.4.1.230.5.11.6.3.1.3	INTEGER	read-only	Number of calls received.
INT nvPricustatCounter2	1.3.6.1.4.1.230.5.11.6.3.1.5	INTEGER	read-only	Number of incoming connections.
INT nvPricustatCounter3	1.3.6.1.4.1.230.5.11.6.3.1.7	INTEGER	read-only	Number of incoming calls rejected.
INT nvPricustatCounter4	1.3.6.1.4.1.230.5.11.6.3.1.9	INTEGER	read-only	Number of inside released connections.
nvPricustatEntry	1.3.6.1.4.1.230.5.11.6.3.1		not-accessible	pricustat record, indexed by record number
INT nvPricustatIndex	1.3.6.1.4.1.230.5.11.6.3.1.1	INTEGER	read-only	Index of pricustat record.
INT nvPricustatMaxRec	1.3.6.1.4.1.230.5.11.6.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPricustatNumRec	1.3.6.1.4.1.230.5.11.6.2	INTEGER	read-only	number of records in use.
STR nvPricustatResettime	1.3.6.1.4.1.230.5.11.6.3.1.10	DisplayString	read-only	Calling number.
nvPricustatTable	1.3.6.1.4.1.230.5.11.6.3		not-accessible	pricustat file.
INT nvPricustatThresh1	1.3.6.1.4.1.230.5.11.6.3.1.2	INTEGER	read-only	Number of calls received.
INT nvPricustatThresh2	1.3.6.1.4.1.230.5.11.6.3.1.4	INTEGER	read-only	Number of incoming connections.
INT nvPricustatThresh3	1.3.6.1.4.1.230.5.11.6.3.1.6	INTEGER	read-only	Number of incoming calls rejected.
INT nvPricustatThresh4	1.3.6.1.4.1.230.5.11.6.3.1.8	INTEGER	read-only	Number of inside released connections.
nvPridstat	1.3.6.1.4.1.230.5.11.4
INT nvPridstatDate	1.3.6.1.4.1.230.5.11.4.3.1.6	INTEGER	read-only	date where event occurred.
nvPridstatEntry	1.3.6.1.4.1.230.5.11.4.3.1		not-accessible	pridstat record, indexed by record number
INT nvPridstatEventno	1.3.6.1.4.1.230.5.11.4.3.1.3	INTEGER	read-only	event number.
INT nvPridstatIndex	1.3.6.1.4.1.230.5.11.4.3.1.1	INTEGER	read-only	Index of pridstat record.
INT nvPridstatMaxRec	1.3.6.1.4.1.230.5.11.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvPridstatNumRec	1.3.6.1.4.1.230.5.11.4.2	INTEGER	read-only	number of records in use.
INT nvPridstatPriname	1.3.6.1.4.1.230.5.11.4.3.1.2	INTEGER	read-only	PRI interface name.
INT nvPridstatProtlayer	1.3.6.1.4.1.230.5.11.4.3.1.4	INTEGER	read-only	layer where event occurred.
nvPridstatTable	1.3.6.1.4.1.230.5.11.4.3		not-accessible	pridstat file.
INT nvPridstatTime	1.3.6.1.4.1.230.5.11.4.3.1.5	INTEGER	read-only	time when event occurred.
nvPristat	1.3.6.1.4.1.230.5.11.2
CTR nvPristatCallaceps	1.3.6.1.4.1.230.5.11.2.3.1.5	Counter	read-only	number of incoming connections.
CTR nvPristatCallconn	1.3.6.1.4.1.230.5.11.2.3.1.31	Counter	read-only	Number of outgoing calls connected.
CTR nvPristatCallcur	1.3.6.1.4.1.230.5.11.2.3.1.12	Counter	read-only	Number of current calls.
CTR nvPristatCallfail	1.3.6.1.4.1.230.5.11.2.3.1.32	Counter	read-only	Number of outgoing calls failed.
CTR nvPristatCallinrels	1.3.6.1.4.1.230.5.11.2.3.1.7	Counter	read-only	number of inside released connections.
CTR nvPristatCalloutrels	1.3.6.1.4.1.230.5.11.2.3.1.8	Counter	read-only	number of outside released connections.
CTR nvPristatCallrecvs	1.3.6.1.4.1.230.5.11.2.3.1.4	Counter	read-only	number of calls received.
CTR nvPristatCallrejs	1.3.6.1.4.1.230.5.11.2.3.1.6	Counter	read-only	number of incoming calls rejected.
CTR nvPristatCallsent	1.3.6.1.4.1.230.5.11.2.3.1.30	Counter	read-only	Number of outgoing calls sent.
CTR nvPristatDchanup	1.3.6.1.4.1.230.5.11.2.3.1.13	Counter	read-only	Number in seconds d channel comes up.
CTR nvPristatDchrst	1.3.6.1.4.1.230.5.11.2.3.1.11	Counter	read-only	Number of d-channel resets.
CTR nvPristatDlirst	1.3.6.1.4.1.230.5.11.2.3.1.10	Counter	read-only	Number of dli chip resets.
STR nvPristatDtreset	1.3.6.1.4.1.230.5.11.2.3.1.14	DisplayString	read-only	date & time statistics last reset
nvPristatEntry	1.3.6.1.4.1.230.5.11.2.3.1		not-accessible	pristat record, indexed by record number
CTR nvPristatEstreq	1.3.6.1.4.1.230.5.11.2.3.1.9	Counter	read-only	Number of established requests.
INT nvPristatIndex	1.3.6.1.4.1.230.5.11.2.3.1.1	INTEGER	read-only	Index of pristat record.
CTR nvPristatMaxincom	1.3.6.1.4.1.230.5.11.2.3.1.28	Counter	read-only	Maximum number of simultaneous incoming calls.
CTR nvPristatMaxoutgo	1.3.6.1.4.1.230.5.11.2.3.1.29	Counter	read-only	Maximum number of simultaneous outgoing calls.
INT nvPristatMaxRec	1.3.6.1.4.1.230.5.11.2.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvPristatMaxrsetup	1.3.6.1.4.1.230.5.11.2.3.1.18	Counter	read-only	Max number of outstanding SETUP messages for dial-in.
CTR nvPristatMaxtsetup	1.3.6.1.4.1.230.5.11.2.3.1.23	Counter	read-only	Max number of outstanding tx SETUP messages.
CTR nvPristatNcurincom	1.3.6.1.4.1.230.5.11.2.3.1.15	Counter	read-only	Current Number of simulataneous incoming calls.
CTR nvPristatNcuroutgo	1.3.6.1.4.1.230.5.11.2.3.1.16	Counter	read-only	Current Number of simulataneous outgoing calls.
CTR nvPristatNnoanswer	1.3.6.1.4.1.230.5.11.2.3.1.27	Counter	read-only	Number of fail no answer for dialout.
CTR nvPristatNrxbusy	1.3.6.1.4.1.230.5.11.2.3.1.26	Counter	read-only	Number of dial-out fails due to busy.
CTR nvPristatNrxconn	1.3.6.1.4.1.230.5.11.2.3.1.25	Counter	read-only	Number of CONNECT recieved for dial-in.
CTR nvPristatNrxsetup	1.3.6.1.4.1.230.5.11.2.3.1.17	Counter	read-only	Number of SETUP messages received.
CTR nvPristatNrxsetupa	1.3.6.1.4.1.230.5.11.2.3.1.19	Counter	read-only	Number of aborted rx SETUP messages.
CTR nvPristatNtxbusy	1.3.6.1.4.1.230.5.11.2.3.1.21	Counter	read-only	Number of dial-in fail due to busy.
CTR nvPristatNtxconn	1.3.6.1.4.1.230.5.11.2.3.1.20	Counter	read-only	Number of CONNECT messages set for dial-in.
CTR nvPristatNtxsetup	1.3.6.1.4.1.230.5.11.2.3.1.22	Counter	read-only	Number of SEUTP messages sent for dial-out.
CTR nvPristatNtxsetupa	1.3.6.1.4.1.230.5.11.2.3.1.24	Counter	read-only	Number of aborted tx SETUP messages.
INT nvPristatNumRec	1.3.6.1.4.1.230.5.11.2.2	INTEGER	read-only	number of records in use.
INT nvPristatPriname	1.3.6.1.4.1.230.5.11.2.3.1.2	INTEGER	read-only	PRI name.
INT nvPristatStatus	1.3.6.1.4.1.230.5.11.2.3.1.3	INTEGER	read-only	interface status.
nvPristatTable	1.3.6.1.4.1.230.5.11.2.3		not-accessible	pristat file.
nvR2conf	1.3.6.1.4.1.230.5.55.3
STR nvR2confDliname	1.3.6.1.4.1.230.5.55.3.3.1.3	DisplayString	read-write	Name of DLI port (dliname)
nvR2confEntry	1.3.6.1.4.1.230.5.55.3.3.1		not-accessible	R2conf record.
INT nvR2confIndex	1.3.6.1.4.1.230.5.55.3.3.1.1	INTEGER	read-only	Index of R2conf record
INT nvR2confMaxRec	1.3.6.1.4.1.230.5.55.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvR2confNumRec	1.3.6.1.4.1.230.5.55.3.2	INTEGER	read-only	number of records in use.
INT nvR2confStatus	1.3.6.1.4.1.230.5.55.3.3.1.4	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvR2confTable	1.3.6.1.4.1.230.5.55.3.3		not-accessible	R2conf file.
nvR2cstat	1.3.6.1.4.1.230.5.55.6
STR nvR2cstatCallednum	1.3.6.1.4.1.230.5.55.6.3.1.9	DisplayString	read-only	Called number
STR nvR2cstatCallingnum	1.3.6.1.4.1.230.5.55.6.3.1.10	DisplayString	read-only	Calling number
INT nvR2cstatCallnum	1.3.6.1.4.1.230.5.55.6.3.1.8	INTEGER	read-only	Sequence number of this call
INT nvR2cstatCparty	1.3.6.1.4.1.230.5.55.6.3.1.13	INTEGER	read-only	Type of calling party
INT nvR2cstatCstat	1.3.6.1.4.1.230.5.55.6.3.1.5	INTEGER	read-only	Current status of this timeslot
INT nvR2cstatDirection	1.3.6.1.4.1.230.5.55.6.3.1.6	INTEGER	read-only	incoming or outgoing call
INT nvR2cstatEchosup	1.3.6.1.4.1.230.5.55.6.3.1.12	INTEGER	read-only	Echo suppressor
nvR2cstatEntry	1.3.6.1.4.1.230.5.55.6.3.1		not-accessible	R2cstat record.
INT nvR2cstatIbr2dsp	1.3.6.1.4.1.230.5.55.6.3.1.4	INTEGER	read-only	R2DSPSTAT recnum of R2DSP carrying this circuit
INT nvR2cstatIndex	1.3.6.1.4.1.230.5.55.6.3.1.1	INTEGER	read-only	Index of R2cstat record
INT nvR2cstatLanguage	1.3.6.1.4.1.230.5.55.6.3.1.11	INTEGER	read-only	Language of call
INT nvR2cstatMaxRec	1.3.6.1.4.1.230.5.55.6.1	INTEGER	read-only	total number of records allowed in database file.
INT nvR2cstatNumRec	1.3.6.1.4.1.230.5.55.6.2	INTEGER	read-only	number of records in use.
INT nvR2cstatR2port	1.3.6.1.4.1.230.5.55.6.3.1.2	INTEGER	read-only	R2CONF record number of port carring timeslot of this call
INT nvR2cstatReason	1.3.6.1.4.1.230.5.55.6.3.1.7	INTEGER	read-only	For failed calls reason for the failure
nvR2cstatTable	1.3.6.1.4.1.230.5.55.6.3		not-accessible	R2cstat file.
INT nvR2cstatTimeslot	1.3.6.1.4.1.230.5.55.6.3.1.3	INTEGER	read-only	Timeslot number
nvR2dspstat	1.3.6.1.4.1.230.5.55.5
STR nvR2dspstatDevname	1.3.6.1.4.1.230.5.55.5.3.1.2	DisplayString	read-only	Name of DSP device used for this R2DSP
STR nvR2dspstatDtreset	1.3.6.1.4.1.230.5.55.5.3.1.9	DisplayString	read-only	date & time statistics last reset
nvR2dspstatEntry	1.3.6.1.4.1.230.5.55.5.3.1		not-accessible	R2dspstat record.
STR nvR2dspstatFlavor	1.3.6.1.4.1.230.5.55.5.3.1.10	DisplayString	read-only	Abbreviation of the R2 Flavor.
INT nvR2dspstatIndex	1.3.6.1.4.1.230.5.55.5.3.1.1	INTEGER	read-only	Index of R2dspstat record
INT nvR2dspstatMaxRec	1.3.6.1.4.1.230.5.55.5.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvR2dspstatNumibchn	1.3.6.1.4.1.230.5.55.5.3.1.5	Counter	read-only	Num of ib channels assigned to this R2DSP
CTR nvR2dspstatNumobchn	1.3.6.1.4.1.230.5.55.5.3.1.4	Counter	read-only	Num of ob sig channels assigned to this R2DSP
INT nvR2dspstatNumRec	1.3.6.1.4.1.230.5.55.5.2	INTEGER	read-only	number of records in use.
INT nvR2dspstatStat	1.3.6.1.4.1.230.5.55.5.3.1.3	INTEGER	read-only	Health status of R2DSP
nvR2dspstatTable	1.3.6.1.4.1.230.5.55.5.3		not-accessible	R2dspstat file.
CTR nvR2dspstatTotibchn	1.3.6.1.4.1.230.5.55.5.3.1.8	Counter	read-only	Cumulative total of ib channels assigned to this R2DSP
CTR nvR2dspstatTotobchn	1.3.6.1.4.1.230.5.55.5.3.1.7	Counter	read-only	Cumulative total of ob channels assigned to this R2DSP
CTR nvR2dspstatUnusedchn	1.3.6.1.4.1.230.5.55.5.3.1.6	Counter	read-only	Num of avaialble timeslots on this R2DSP
nvR2prof	1.3.6.1.4.1.230.5.55.1
INT nvR2profAnswalmsk	1.3.6.1.4.1.230.5.55.1.3.1.27	INTEGER	read-write	Mask alarms in ANSWERED state?
INT nvR2profAnswergrd	1.3.6.1.4.1.230.5.55.1.3.1.21	INTEGER	read-write	Minimal duration of answer signal in ms.
INT nvR2profBlckalmsk	1.3.6.1.4.1.230.5.55.1.3.1.31	INTEGER	read-write	Mask alarms in BLOCKED state?
INT nvR2profcdBits	1.3.6.1.4.1.230.5.55.1.3.1.4	INTEGER	read-write	Support for CD bits (cdbits) Default value 2
INT nvR2profClbkalmsk	1.3.6.1.4.1.230.5.55.1.3.1.28	INTEGER	read-write	Mask alarms in ANSWERED state?
INT nvR2profClearack	1.3.6.1.4.1.230.5.55.1.3.1.7	INTEGER	read-write	Support for CLEAR_ACK (clearack)
INT nvR2profClearback	1.3.6.1.4.1.230.5.55.1.3.1.5	INTEGER	read-write	Support for CLEAR_BACK (clearback)
INT nvR2profClfwalmsk	1.3.6.1.4.1.230.5.55.1.3.1.30	INTEGER	read-write	Mask alarms in CLEAR FWD state?
INT nvR2profClrfwdgrd	1.3.6.1.4.1.230.5.55.1.3.1.22	INTEGER	read-write	Minimal duration of clr fwd signal in ms.
nvR2profEntry	1.3.6.1.4.1.230.5.55.1.3.1		not-accessible	R2prof record.
INT nvR2profFcrlalmsk	1.3.6.1.4.1.230.5.55.1.3.1.29	INTEGER	read-write	Mask alarms in FORCE RELEASE state?
INT nvR2profForcerel	1.3.6.1.4.1.230.5.55.1.3.1.6	INTEGER	read-write	Support for Forced Release (forcerel)
INT nvR2profIdlealmsk	1.3.6.1.4.1.230.5.55.1.3.1.24	INTEGER	read-write	Mask alarms in IDLE state?
INT nvR2profIndex	1.3.6.1.4.1.230.5.55.1.3.1.1	INTEGER	read-only	Index of R2prof record
INT nvR2profMaxRec	1.3.6.1.4.1.230.5.55.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvR2profMfabnrel	1.3.6.1.4.1.230.5.55.1.3.1.23	INTEGER	read-write	MF code for abnormal release of inband.
INT nvR2profMfanumsch	1.3.6.1.4.1.230.5.55.1.3.1.18	INTEGER	read-write	Trans prot type for calling number (mfanumsch)
INT nvR2profMfbusy	1.3.6.1.4.1.230.5.55.1.3.1.15	INTEGER	read-write	MF code for line busy (mfbusy)
INT nvR2profMfcongstion	1.3.6.1.4.1.230.5.55.1.3.1.12	INTEGER	read-write	MF code for eqpt congestion (mfcongestion)
INT nvR2profMfgroupb	1.3.6.1.4.1.230.5.55.1.3.1.17	INTEGER	read-write	MF code for change to group B (mfgroupb)
INT nvR2profMfmode	1.3.6.1.4.1.230.5.55.1.3.1.9	INTEGER	read-write	MF scheme for in-band signaling (mfmode)
INT nvR2profMfnextdig	1.3.6.1.4.1.230.5.55.1.3.1.10	INTEGER	read-write	MF code for send next digit (mfnextdig)
INT nvR2profMfrestart	1.3.6.1.4.1.230.5.55.1.3.1.11	INTEGER	read-write	MF code for restart (mfrestart)
INT nvR2profMfspchnc	1.3.6.1.4.1.230.5.55.1.3.1.16	INTEGER	read-write	MF code for free no charge (mfspchnc)
INT nvR2profMfspeech	1.3.6.1.4.1.230.5.55.1.3.1.14	INTEGER	read-write	MF code for set up speech charge (mfspeech)
INT nvR2profMftimeout	1.3.6.1.4.1.230.5.55.1.3.1.19	INTEGER	read-write	Timeout for MF signaling (mftimeout)
INT nvR2profMfvacant	1.3.6.1.4.1.230.5.55.1.3.1.13	INTEGER	read-write	MF code for vacant number (mfvacant)
INT nvR2profNumRec	1.3.6.1.4.1.230.5.55.1.2	INTEGER	read-only	number of records in use.
STR nvR2profProfname	1.3.6.1.4.1.230.5.55.1.3.1.2	DisplayString	read-write	Name of R2 flavor (profname)
INT nvR2profReanswer	1.3.6.1.4.1.230.5.55.1.3.1.8	INTEGER	read-write	Support for Reanswer (reanswer)
INT nvR2profSeizalmsk	1.3.6.1.4.1.230.5.55.1.3.1.25	INTEGER	read-write	Mask alarms in SEIZED state?
INT nvR2profStatus	1.3.6.1.4.1.230.5.55.1.3.1.20	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
STR nvR2profSuffix	1.3.6.1.4.1.230.5.55.1.3.1.3	DisplayString	read-write	Abbreviation of R2 flavor (suffix)
INT nvR2profSzakalmsk	1.3.6.1.4.1.230.5.55.1.3.1.26	INTEGER	read-write	Mask alarms in SEIZE ACK state?
nvR2profTable	1.3.6.1.4.1.230.5.55.1.3		not-accessible	R2prof file.
nvR2pstat	1.3.6.1.4.1.230.5.55.4
STR nvR2pstatDliname	1.3.6.1.4.1.230.5.55.4.3.1.2	DisplayString	read-only	Name of DLI port (dliname)
STR nvR2pstatDtreset	1.3.6.1.4.1.230.5.55.4.3.1.16	DisplayString	read-only	date & time statistics last reset
nvR2pstatEntry	1.3.6.1.4.1.230.5.55.4.3.1		not-accessible	R2pstat record.
STR nvR2pstatFlavor	1.3.6.1.4.1.230.5.55.4.3.1.17	DisplayString	read-only	Abbreviation of R2 flavor.
INT nvR2pstatIndex	1.3.6.1.4.1.230.5.55.4.3.1.1	INTEGER	read-only	Index of R2pstat record
CTR nvR2pstatLinbadcnt	1.3.6.1.4.1.230.5.55.4.3.1.8	Counter	read-only	No. of line_status line_bad msg received
INT nvR2pstatLstatinfo	1.3.6.1.4.1.230.5.55.4.3.1.7	INTEGER	read-only	Information accompanying a LINE_STATUS message
INT nvR2pstatMaxRec	1.3.6.1.4.1.230.5.55.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvR2pstatNumRec	1.3.6.1.4.1.230.5.55.4.2	INTEGER	read-only	number of records in use.
INT nvR2pstatObr2dsp	1.3.6.1.4.1.230.5.55.4.3.1.5	INTEGER	read-only	R2DSP which has this ports ob sig channel
INT nvR2pstatObstat	1.3.6.1.4.1.230.5.55.4.3.1.6	INTEGER	read-only	status of the ob sig channel for this port
INT nvR2pstatPstat	1.3.6.1.4.1.230.5.55.4.3.1.3	INTEGER	read-only	Status of R2 port
nvR2pstatTable	1.3.6.1.4.1.230.5.55.4.3		not-accessible	R2pstat file.
CTR nvR2pstatToticalatt	1.3.6.1.4.1.230.5.55.4.3.1.11	Counter	read-only	No. of incoming R2 calls attempted
CTR nvR2pstatToticalest	1.3.6.1.4.1.230.5.55.4.3.1.12	Counter	read-only	No. of incoming R2 calls established
CTR nvR2pstatTotisigatt	1.3.6.1.4.1.230.5.55.4.3.1.10	Counter	read-only	No. of incoming in-band channels created
CTR nvR2pstatTotocalatt	1.3.6.1.4.1.230.5.55.4.3.1.14	Counter	read-only	No. of outgoing R2 calls attempted
CTR nvR2pstatTotocalest	1.3.6.1.4.1.230.5.55.4.3.1.15	Counter	read-only	No. of outgoing R2 calls established
CTR nvR2pstatTotosigatt	1.3.6.1.4.1.230.5.55.4.3.1.13	Counter	read-only	No. of outgoing in-band channels created
CTR nvR2pstatTsbadcnt	1.3.6.1.4.1.230.5.55.4.3.1.9	Counter	read-only	No. of line_status line_bad msg received
STR nvR2pstatTsstat	1.3.6.1.4.1.230.5.55.4.3.1.4	DisplayString	read-only	Status of R2 port's timeslots. s : means timeslot for synchronization O : means out-of-band signaling - : means no info yet B : means blocked I : means idle M : means in-band signaling (MF) C : means call is up E : means timeslot is in abnormal state D : means port is down.
nvR2syspar	1.3.6.1.4.1.230.5.55.2
INT nvR2sysparAlarmint	1.3.6.1.4.1.230.5.55.2.3.1.7	INTEGER	read-write	Debounce for line status changes (alarmint)
INT nvR2sysparAllocthrs	1.3.6.1.4.1.230.5.55.2.3.1.4	INTEGER	read-write	Allocation threshold for R2DSPs (allocthrs)
INT nvR2sysparDeallthrs	1.3.6.1.4.1.230.5.55.2.3.1.5	INTEGER	read-write	Deallocation threshold for R2DSPs (deallthrs)
nvR2sysparEntry	1.3.6.1.4.1.230.5.55.2.3.1		not-accessible	R2syspar record.
INT nvR2sysparGetcalling	1.3.6.1.4.1.230.5.55.2.3.1.11	INTEGER	read-write	Whether or not calling number is needed (getcallng) default is yes
INT nvR2sysparIndex	1.3.6.1.4.1.230.5.55.2.3.1.1	INTEGER	read-only	Index of R2syspar record
INT nvR2sysparLineway	1.3.6.1.4.1.230.5.55.2.3.1.8	INTEGER	read-write	Direction of allowed R2 calls (lineway)
INT nvR2sysparMaxbnmlen	1.3.6.1.4.1.230.5.55.2.3.1.9	INTEGER	read-write	Maximum length of called number for incoming calls (maxbnmlen) default is zero
INT nvR2sysparMaxperdsp	1.3.6.1.4.1.230.5.55.2.3.1.3	INTEGER	read-write	Signaling channels allowed per R2DSP (maxperdsp)
INT nvR2sysparMaxRec	1.3.6.1.4.1.230.5.55.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvR2sysparMinbnmlen	1.3.6.1.4.1.230.5.55.2.3.1.10	INTEGER	read-write	Minimum length of called number for incoming calls (minbnmlen) Default value is zero
INT nvR2sysparNumRec	1.3.6.1.4.1.230.5.55.2.2	INTEGER	read-only	number of records in use.
STR nvR2sysparProfname	1.3.6.1.4.1.230.5.55.2.3.1.2	DisplayString	read-write	Name of R2 flavor (profname)
INT nvR2sysparStatint	1.3.6.1.4.1.230.5.55.2.3.1.6	INTEGER	read-write	Health status message interval for R2DSPs (statint)
nvR2sysparTable	1.3.6.1.4.1.230.5.55.2.3		not-accessible	R2syspar file.
nvRadconf	1.3.6.1.4.1.230.5.40.1
INT nvRadconfAcct	1.3.6.1.4.1.230.5.40.1.3.1.6	INTEGER	read-write	radius accounting.
STR nvRadconfAcct1	1.3.6.1.4.1.230.5.40.1.3.1.14	DisplayString	read-write	IP address primary accounting.
INT nvRadconfAcct1port	1.3.6.1.4.1.230.5.40.1.3.1.24	INTEGER	read-write	account server port1 .
STR nvRadconfAcct2	1.3.6.1.4.1.230.5.40.1.3.1.16	DisplayString	read-write	IP address secondary accounting.
INT nvRadconfAcct2port	1.3.6.1.4.1.230.5.40.1.3.1.25	INTEGER	read-write	account server port2 .
STR nvRadconfAcct3	1.3.6.1.4.1.230.5.40.1.3.1.18	DisplayString	read-write	IP address tertiary accounting.
INT nvRadconfAcct3port	1.3.6.1.4.1.230.5.40.1.3.1.26	INTEGER	read-write	account server port3 .
INT nvRadconfAcctauth	1.3.6.1.4.1.230.5.40.1.3.1.20	INTEGER	read-write	authorizarion encoding.
INT nvRadconfAttrchk	1.3.6.1.4.1.230.5.40.1.3.1.27	INTEGER	read-write	Strict attribute checking.
STR nvRadconfAuth1	1.3.6.1.4.1.230.5.40.1.3.1.8	DisplayString	read-write	IP address primary auth server.
INT nvRadconfAuth1port	1.3.6.1.4.1.230.5.40.1.3.1.21	INTEGER	read-write	authserver port1 .
STR nvRadconfAuth2	1.3.6.1.4.1.230.5.40.1.3.1.10	DisplayString	read-write	IP address secondary auth server.
INT nvRadconfAuth2port	1.3.6.1.4.1.230.5.40.1.3.1.22	INTEGER	read-write	authserver port2 .
STR nvRadconfAuth3	1.3.6.1.4.1.230.5.40.1.3.1.12	DisplayString	read-write	IP address tertiary auth server.
INT nvRadconfAuth3port	1.3.6.1.4.1.230.5.40.1.3.1.23	INTEGER	read-write	authserver port3 .
INT nvRadconfDnsatt1	1.3.6.1.4.1.230.5.40.1.3.1.28	INTEGER	read-write	attribute code for primary DNS server
INT nvRadconfDnsatt2	1.3.6.1.4.1.230.5.40.1.3.1.29	INTEGER	read-write	attribute code for secondary DNS server
nvRadconfEntry	1.3.6.1.4.1.230.5.40.1.3.1		not-accessible	radconf record, indexed by record number
INT nvRadconfIndex	1.3.6.1.4.1.230.5.40.1.3.1.1	INTEGER	read-only	Index of radconf record
INT nvRadconfMaxRec	1.3.6.1.4.1.230.5.40.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvRadconfN1	1.3.6.1.4.1.230.5.40.1.3.1.4	INTEGER	read-write	retry counter.
STR nvRadconfName	1.3.6.1.4.1.230.5.40.1.3.1.2	DisplayString	read-write	Nevada name.
INT nvRadconfNbnsatt1	1.3.6.1.4.1.230.5.40.1.3.1.30	INTEGER	read-write	attribute code for primary NBNS server
INT nvRadconfNbnsatt2	1.3.6.1.4.1.230.5.40.1.3.1.32	INTEGER	read-write	attribute code for secondary NBNS server
INT nvRadconfNumdigits	1.3.6.1.4.1.230.5.40.1.3.1.7	INTEGER	read-write	trailing port digits.
INT nvRadconfNumRec	1.3.6.1.4.1.230.5.40.1.2	INTEGER	read-only	number of records in use.
STR nvRadconfSecret	1.3.6.1.4.1.230.5.40.1.3.1.3	DisplayString	read-write	secret for accounting.
INT nvRadconfStatus	1.3.6.1.4.1.230.5.40.1.3.1.31	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
INT nvRadconfT1	1.3.6.1.4.1.230.5.40.1.3.1.5	INTEGER	read-write	times between attempts.
nvRadconfTable	1.3.6.1.4.1.230.5.40.1.3		not-accessible	radconf file.
nvRadcstat	1.3.6.1.4.1.230.5.40.3
STR nvRadcstatDtreset	1.3.6.1.4.1.230.5.40.3.3.1.21	DisplayString	read-only	date & time statistics last reset
nvRadcstatEntry	1.3.6.1.4.1.230.5.40.3.3.1		not-accessible	radcstat record, indexed by record number
INT nvRadcstatIndex	1.3.6.1.4.1.230.5.40.3.3.1.1	INTEGER	read-only	Index of radcstat record
INT nvRadcstatMaxRec	1.3.6.1.4.1.230.5.40.3.1	INTEGER	read-only	total number of records allowed in database file.
STR nvRadcstatNAcct	1.3.6.1.4.1.230.5.40.3.3.1.14	DisplayString	read-only	number of accounting msgs attempts.
STR nvRadcstatNAcct1	1.3.6.1.4.1.230.5.40.3.3.1.17	DisplayString	read-only	number of accounting msgs acct1.
STR nvRadcstatNAcct2	1.3.6.1.4.1.230.5.40.3.3.1.18	DisplayString	read-only	number of accounting msgs acct2.
STR nvRadcstatNAcct3	1.3.6.1.4.1.230.5.40.3.3.1.19	DisplayString	read-only	number of accounting msgs acct3.
STR nvRadcstatNAcctLost	1.3.6.1.4.1.230.5.40.3.3.1.15	DisplayString	read-only	number of accounting records lost.
STR nvRadcstatNAcctRtry	1.3.6.1.4.1.230.5.40.3.3.1.16	DisplayString	read-only	number of accounting msgs retry.
STR nvRadcstatNAuth1Acc	1.3.6.1.4.1.230.5.40.3.3.1.8	DisplayString	read-only	number of auth accepts by auth1.
STR nvRadcstatNAuth1Rej	1.3.6.1.4.1.230.5.40.3.3.1.9	DisplayString	read-only	number of auth rejects by auth1.
STR nvRadcstatNAuth2Acc	1.3.6.1.4.1.230.5.40.3.3.1.10	DisplayString	read-only	number of auth accepts by auth2.
STR nvRadcstatNAuth2Rej	1.3.6.1.4.1.230.5.40.3.3.1.11	DisplayString	read-only	number of auth rejects by auth2.
STR nvRadcstatNAuth3Acc	1.3.6.1.4.1.230.5.40.3.3.1.12	DisplayString	read-only	number of auth accepts by auth3.
STR nvRadcstatNAuth3Rej	1.3.6.1.4.1.230.5.40.3.3.1.13	DisplayString	read-only	number of auth rejects by auth3.
STR nvRadcstatNAuthLocl	1.3.6.1.4.1.230.5.40.3.3.1.5	DisplayString	read-only	number of local authorizations.
STR nvRadcstatNAuthLost	1.3.6.1.4.1.230.5.40.3.3.1.6	DisplayString	read-only	number of authorization lost.
STR nvRadcstatNAuthRtry	1.3.6.1.4.1.230.5.40.3.3.1.7	DisplayString	read-only	number of authentication retr.
STR nvRadcstatNAuths	1.3.6.1.4.1.230.5.40.3.3.1.4	DisplayString	read-only	number of auth attempts.
STR nvRadcstatNSilent	1.3.6.1.4.1.230.5.40.3.3.1.20	DisplayString	read-only	num of silent discards
INT nvRadcstatNumRec	1.3.6.1.4.1.230.5.40.3.2	INTEGER	read-only	number of records in use.
INT nvRadcstatRadAdminS	1.3.6.1.4.1.230.5.40.3.3.1.2	INTEGER	read-only	radius admin status.
INT nvRadcstatRadcOperS	1.3.6.1.4.1.230.5.40.3.3.1.3	INTEGER	read-only	radius operation status.
nvRadcstatTable	1.3.6.1.4.1.230.5.40.3.3		not-accessible	radcstat file.
nvRaduser	1.3.6.1.4.1.230.5.40.2
nvRaduserEntry	1.3.6.1.4.1.230.5.40.2.3.1		not-accessible	raduser record, indexed by record number
INT nvRaduserIndex	1.3.6.1.4.1.230.5.40.2.3.1.1	INTEGER	read-only	Index of raduser record
INT nvRaduserMaxRec	1.3.6.1.4.1.230.5.40.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvRaduserNumRec	1.3.6.1.4.1.230.5.40.2.2	INTEGER	read-only	number of records in use.
STR nvRaduserPasswd	1.3.6.1.4.1.230.5.40.2.3.1.3	DisplayString	read-write	user password.
INT nvRaduserRespmsg	1.3.6.1.4.1.230.5.40.2.3.1.4	INTEGER	read-write	stringid of response message.
INT nvRaduserStatus	1.3.6.1.4.1.230.5.40.2.3.1.15	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvRaduserTable	1.3.6.1.4.1.230.5.40.2.3		not-accessible	raduser file.
STR nvRaduserUsername	1.3.6.1.4.1.230.5.40.2.3.1.2	DisplayString	read-write	user name.
nvRadustat	1.3.6.1.4.1.230.5.40.4
STR nvRadustatClass	1.3.6.1.4.1.230.5.40.4.3.1.14	DisplayString	read-only	class.
INT nvRadustatDFilter	1.3.6.1.4.1.230.5.40.4.3.1.24	INTEGER	read-only	Data filters.
STR nvRadustatDtreset	1.3.6.1.4.1.230.5.40.4.3.1.26	DisplayString	read-only	date & time statistics last reset
nvRadustatEntry	1.3.6.1.4.1.230.5.40.4.3.1		not-accessible	radustat record, indexed by record number
STR nvRadustatFrmIpaddr	1.3.6.1.4.1.230.5.40.4.3.1.7	DisplayString	read-only	Framed IP address.
STR nvRadustatFrmIpMask	1.3.6.1.4.1.230.5.40.4.3.1.8	DisplayString	read-only	Framed IP mask.
INT nvRadustatFrmMtu	1.3.6.1.4.1.230.5.40.4.3.1.20	INTEGER	read-only	Framed mtu.
INT nvRadustatFrmProto	1.3.6.1.4.1.230.5.40.4.3.1.17	INTEGER	read-only	Framed protocol type.
INT nvRadustatFrmRt	1.3.6.1.4.1.230.5.40.4.3.1.21	INTEGER	read-only	Framed route.
INT nvRadustatFrmRting	1.3.6.1.4.1.230.5.40.4.3.1.18	INTEGER	read-only	Framed routing attribute type.
INT nvRadustatIndex	1.3.6.1.4.1.230.5.40.4.3.1.1	INTEGER	read-only	Index of radustat record
INT nvRadustatITimeout	1.3.6.1.4.1.230.5.40.4.3.1.23	INTEGER	read-only	Idle timeout.
INT nvRadustatMaxRec	1.3.6.1.4.1.230.5.40.4.1	INTEGER	read-only	total number of records allowed in database file.
STR nvRadustatNasIpAddr	1.3.6.1.4.1.230.5.40.4.3.1.6	DisplayString	read-only	NAS IP address.
STR nvRadustatNasPort	1.3.6.1.4.1.230.5.40.4.3.1.5	DisplayString	read-only	Called address.
INT nvRadustatNumRec	1.3.6.1.4.1.230.5.40.4.2	INTEGER	read-only	number of records in use.
INT nvRadustatRaduOperS	1.3.6.1.4.1.230.5.40.4.3.1.2	INTEGER	read-only	User operation/session status.
STR nvRadustatReqId	1.3.6.1.4.1.230.5.40.4.3.1.25	DisplayString	read-only	Request ID of outstanding radius msgs.
STR nvRadustatSessionId	1.3.6.1.4.1.230.5.40.4.3.1.3	DisplayString	read-only	accounting session-id name.
STR nvRadustatState	1.3.6.1.4.1.230.5.40.4.3.1.13	DisplayString	read-only	state.
INT nvRadustatSTime	1.3.6.1.4.1.230.5.40.4.3.1.19	INTEGER	read-only	Seconds the call was active.
INT nvRadustatSTimeout	1.3.6.1.4.1.230.5.40.4.3.1.22	INTEGER	read-only	Session timeout.
INT nvRadustatSType	1.3.6.1.4.1.230.5.40.4.3.1.15	INTEGER	read-only	Service type.
nvRadustatTable	1.3.6.1.4.1.230.5.40.4.3		not-accessible	radustat file.
STR nvRadustatUserId	1.3.6.1.4.1.230.5.40.4.3.1.4	DisplayString	read-only	user/host name of requestor.
nvRbconf	1.3.6.1.4.1.230.5.58.2
STR nvRbconfDliname	1.3.6.1.4.1.230.5.58.2.3.1.3	DisplayString	read-write	Name of DLI port (dliname)
nvRbconfEntry	1.3.6.1.4.1.230.5.58.2.3.1		not-accessible	Rbconf record.
INT nvRbconfIndex	1.3.6.1.4.1.230.5.58.2.3.1.1	INTEGER	read-only	Index of Rbconf record
INT nvRbconfMaxRec	1.3.6.1.4.1.230.5.58.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvRbconfNumRec	1.3.6.1.4.1.230.5.58.2.2	INTEGER	read-only	number of records in use.
STR nvRbconfProfname	1.3.6.1.4.1.230.5.58.2.3.1.4	DisplayString	read-write	Name of Prof
INT nvRbconfRtmethod	1.3.6.1.4.1.230.5.58.2.3.1.5	INTEGER	read-write	default 15
INT nvRbconfStatus	1.3.6.1.4.1.230.5.58.2.3.1.6	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvRbconfTable	1.3.6.1.4.1.230.5.58.2.3		not-accessible	Rbconf file.
nvRbcstat	1.3.6.1.4.1.230.5.58.5
STR nvRbcstatCallednum	1.3.6.1.4.1.230.5.58.5.3.1.9	DisplayString	read-only	Called number
STR nvRbcstatCallingnum	1.3.6.1.4.1.230.5.58.5.3.1.10	DisplayString	read-only	Calling number
INT nvRbcstatCallnum	1.3.6.1.4.1.230.5.58.5.3.1.8	INTEGER	read-only	Sequence number of this call
INT nvRbcstatCstat	1.3.6.1.4.1.230.5.58.5.3.1.5	INTEGER	read-only	Current status of this timeslot
INT nvRbcstatDirection	1.3.6.1.4.1.230.5.58.5.3.1.6	INTEGER	read-only	incoming or outgoing call
nvRbcstatEntry	1.3.6.1.4.1.230.5.58.5.3.1		not-accessible	Rbcstat record.
INT nvRbcstatIbrbdsp	1.3.6.1.4.1.230.5.58.5.3.1.4	INTEGER	read-only	RBDSPSTAT recnum of RBDSP carrying this circuit
INT nvRbcstatIndex	1.3.6.1.4.1.230.5.58.5.3.1.1	INTEGER	read-only	Index of Rbcstat record
INT nvRbcstatMaxRec	1.3.6.1.4.1.230.5.58.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvRbcstatNumRec	1.3.6.1.4.1.230.5.58.5.2	INTEGER	read-only	number of records in use.
INT nvRbcstatRbport	1.3.6.1.4.1.230.5.58.5.3.1.2	INTEGER	read-only	RBCONF record number of port carring timeslot of this call
INT nvRbcstatReason	1.3.6.1.4.1.230.5.58.5.3.1.7	INTEGER	read-only	For failed calls reason for the failure
nvRbcstatTable	1.3.6.1.4.1.230.5.58.5.3		not-accessible	Rbcstat file.
INT nvRbcstatTimeslot	1.3.6.1.4.1.230.5.58.5.3.1.3	INTEGER	read-only	Timeslot number
nvRbdspstat	1.3.6.1.4.1.230.5.58.4
STR nvRbdspstatDevname	1.3.6.1.4.1.230.5.58.4.3.1.2	DisplayString	read-only	Name of DSP device used for this RbDSP
STR nvRbdspstatDtreset	1.3.6.1.4.1.230.5.58.4.3.1.10	DisplayString	read-only	date & time statistics last reset
nvRbdspstatEntry	1.3.6.1.4.1.230.5.58.4.3.1		not-accessible	Rbdspstat record.
STR nvRbdspstatFlavor	1.3.6.1.4.1.230.5.58.4.3.1.3	DisplayString	read-only	flavor
INT nvRbdspstatIndex	1.3.6.1.4.1.230.5.58.4.3.1.1	INTEGER	read-only	Index of Rbdspstat record
INT nvRbdspstatMaxRec	1.3.6.1.4.1.230.5.58.4.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvRbdspstatNumibchn	1.3.6.1.4.1.230.5.58.4.3.1.6	Counter	read-only	Num of ib channels assigned to this RbDSP
CTR nvRbdspstatNumrbpipe	1.3.6.1.4.1.230.5.58.4.3.1.5	Counter	read-only	Num of rbpipe sig channels assigned to this RbDSP
INT nvRbdspstatNumRec	1.3.6.1.4.1.230.5.58.4.2	INTEGER	read-only	number of records in use.
INT nvRbdspstatStat	1.3.6.1.4.1.230.5.58.4.3.1.4	INTEGER	read-only	Health status of RbDSP
nvRbdspstatTable	1.3.6.1.4.1.230.5.58.4.3		not-accessible	Rbdspstat file.
CTR nvRbdspstatTotibchn	1.3.6.1.4.1.230.5.58.4.3.1.9	Counter	read-only	Cumulative total of ib channels assigned to this RbDSP
CTR nvRbdspstatTotrbpipe	1.3.6.1.4.1.230.5.58.4.3.1.8	Counter	read-only	Cumulative total of rbpipe channels assigned to this RbDSP
CTR nvRbdspstatUnusedchn	1.3.6.1.4.1.230.5.58.4.3.1.7	Counter	read-only	Num of avaialble timeslots on this RbDSP
nvRbprof	1.3.6.1.4.1.230.5.58.6
INT nvRbprofDisconlen	1.3.6.1.4.1.230.5.58.6.3.1.9	INTEGER	read-write	Duration of EM disconnection.
INT nvRbprofDtmfoff	1.3.6.1.4.1.230.5.58.6.3.1.13	INTEGER	read-write	DTMF signal OFF time.
INT nvRbprofDtmfon	1.3.6.1.4.1.230.5.58.6.3.1.12	INTEGER	read-write	DTMF signal ON time.
INT nvRbprofDtmftmout	1.3.6.1.4.1.230.5.58.6.3.1.11	INTEGER	read-write	DTMF signal timeout.
nvRbprofEntry	1.3.6.1.4.1.230.5.58.6.3.1		not-accessible	Rbprof record.
INT nvRbprofIbsigtype	1.3.6.1.4.1.230.5.58.6.3.1.10	INTEGER	read-write	Inband signaling protocol to use.
INT nvRbprofIndex	1.3.6.1.4.1.230.5.58.6.3.1.1	INTEGER	read-only	Index of Rbprof record
INT nvRbprofLcfo	1.3.6.1.4.1.230.5.58.6.3.1.6	INTEGER	read-write
INT nvRbprofMaxRec	1.3.6.1.4.1.230.5.58.6.1	INTEGER	read-only	total number of records allowed in database file.
INT nvRbprofMfdelay	1.3.6.1.4.1.230.5.58.6.3.1.8	INTEGER	read-write	Duration in ms between wink and inband (mfdelay).
INT nvRbprofNumRec	1.3.6.1.4.1.230.5.58.6.2	INTEGER	read-only	number of records in use.
STR nvRbprofProfname	1.3.6.1.4.1.230.5.58.6.3.1.2	DisplayString	read-write	Name of RB flavor (profname)
INT nvRbprofRlcf	1.3.6.1.4.1.230.5.58.6.3.1.5	INTEGER	read-write
INT nvRbprofSigtype	1.3.6.1.4.1.230.5.58.6.3.1.4	INTEGER	read-write	Support for CD bits (cdbits) Default value 2
INT nvRbprofStatus	1.3.6.1.4.1.230.5.58.6.3.1.14	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
STR nvRbprofSuffix	1.3.6.1.4.1.230.5.58.6.3.1.3	DisplayString	read-write	Abbreviation of RB flavor (suffix)
nvRbprofTable	1.3.6.1.4.1.230.5.58.6.3		not-accessible	Rbprof file.
INT nvRbprofWinklen	1.3.6.1.4.1.230.5.58.6.3.1.7	INTEGER	read-write	Support for CLEAR_ACK (clearack)
nvRbpstat	1.3.6.1.4.1.230.5.58.3
STR nvRbpstatDliname	1.3.6.1.4.1.230.5.58.3.3.1.2	DisplayString	read-only	Name of (dliname)
STR nvRbpstatDtreset	1.3.6.1.4.1.230.5.58.3.3.1.17	DisplayString	read-only	date & time statistics last reset
nvRbpstatEntry	1.3.6.1.4.1.230.5.58.3.3.1		not-accessible	Rbpstat record.
STR nvRbpstatFlavor	1.3.6.1.4.1.230.5.58.3.3.1.3	DisplayString	read-only	Name
INT nvRbpstatIndex	1.3.6.1.4.1.230.5.58.3.3.1.1	INTEGER	read-only	Index of Rbpstat record
CTR nvRbpstatLinbadcnt	1.3.6.1.4.1.230.5.58.3.3.1.9	Counter	read-only	No. of line_status line_bad msg received
INT nvRbpstatLstatinfo	1.3.6.1.4.1.230.5.58.3.3.1.8	INTEGER	read-only	Information accompanying a LINE_STATUS message
INT nvRbpstatMaxRec	1.3.6.1.4.1.230.5.58.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvRbpstatNumRec	1.3.6.1.4.1.230.5.58.3.2	INTEGER	read-only	number of records in use.
INT nvRbpstatPstat	1.3.6.1.4.1.230.5.58.3.3.1.4	INTEGER	read-only	Status of Rb port
INT nvRbpstatRbsrbdsp	1.3.6.1.4.1.230.5.58.3.3.1.6	INTEGER	read-only	RbsrbDSP which has this ports ob sig channel
INT nvRbpstatRbstat	1.3.6.1.4.1.230.5.58.3.3.1.7	INTEGER	read-only	status of the ob sig channel for this port
nvRbpstatTable	1.3.6.1.4.1.230.5.58.3.3		not-accessible	Rbpstat file.
CTR nvRbpstatToticalatt	1.3.6.1.4.1.230.5.58.3.3.1.12	Counter	read-only	No. of incoming Rb calls attempted
CTR nvRbpstatToticalest	1.3.6.1.4.1.230.5.58.3.3.1.13	Counter	read-only	No. of incoming Rb calls established
CTR nvRbpstatTotisigatt	1.3.6.1.4.1.230.5.58.3.3.1.11	Counter	read-only	No. of incoming in-band channels created
CTR nvRbpstatTotocalatt	1.3.6.1.4.1.230.5.58.3.3.1.15	Counter	read-only	No. of outgoing R2 calls attempted
CTR nvRbpstatTotocalest	1.3.6.1.4.1.230.5.58.3.3.1.16	Counter	read-only	No. of outgoing Rb calls established
CTR nvRbpstatTotosigatt	1.3.6.1.4.1.230.5.58.3.3.1.14	Counter	read-only	No. of outgoing in-band channels created
CTR nvRbpstatTsbadcnt	1.3.6.1.4.1.230.5.58.3.3.1.10	Counter	read-only	No. of line_status line_bad msg received
STR nvRbpstatTsstat	1.3.6.1.4.1.230.5.58.3.3.1.5	DisplayString	read-only	Status of Rb port's timeslots. s : means timeslot for synchronization O : means out-of-band signaling - : means no info yet B : means blocked I : means idle M : means in-band signaling (MF) C : means call is up E : means timeslot is in abnormal state D : means port is down.
nvRbsyspar	1.3.6.1.4.1.230.5.58.1
INT nvRbsysparAlarmint	1.3.6.1.4.1.230.5.58.1.3.1.7	INTEGER	read-write	Debounce for line status changes (alarmint)
INT nvRbsysparAllocthrs	1.3.6.1.4.1.230.5.58.1.3.1.4	INTEGER	read-write	Allocation threshold for RbDSPs (allocthrs)
INT nvRbsysparDeallthrs	1.3.6.1.4.1.230.5.58.1.3.1.5	INTEGER	read-write	Deallocation threshold for RbDSPs (deallthrs)
nvRbsysparEntry	1.3.6.1.4.1.230.5.58.1.3.1		not-accessible	Rbsyspar record.
INT nvRbsysparIndex	1.3.6.1.4.1.230.5.58.1.3.1.1	INTEGER	read-only	Index of Rbsyspar record
INT nvRbsysparMaxbnmlen	1.3.6.1.4.1.230.5.58.1.3.1.9	INTEGER	read-write	Maximum length of called number for incoming calls (maxbnmlen) default is zero
INT nvRbsysparMaxperdsp	1.3.6.1.4.1.230.5.58.1.3.1.3	INTEGER	read-write	Signaling channels allowed per RbDSP (maxperdsp)
INT nvRbsysparMaxRec	1.3.6.1.4.1.230.5.58.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvRbsysparMinbnmlen	1.3.6.1.4.1.230.5.58.1.3.1.10	INTEGER	read-write	Minimum length of called number for incoming calls (minbnmlen) Default value is zero
INT nvRbsysparNumRec	1.3.6.1.4.1.230.5.58.1.2	INTEGER	read-only	number of records in use.
INT nvRbsysparPollint	1.3.6.1.4.1.230.5.58.1.3.1.11	INTEGER	read-write	Polling interval for RB pipes. default is 25
INT nvRbsysparStatint	1.3.6.1.4.1.230.5.58.1.3.1.6	INTEGER	read-write	Health status message interval for RbDSPs (statint)
INT nvRbsysparStatus	1.3.6.1.4.1.230.5.58.1.3.1.12	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvRbsysparTable	1.3.6.1.4.1.230.5.58.1.3		not-accessible	Rbsyspar file.
INT nvReboot	1.3.6.1.4.1.230.5.65.1	INTEGER	read-write	Reboot Nevada.
nvRoutemap	1.3.6.1.4.1.230.5.1.14
STR nvRoutemapAddrstr	1.3.6.1.4.1.230.5.1.14.3.1.2	DisplayString	read-write	Address string to be translated (addrstr).
INT nvRoutemapAddrtype	1.3.6.1.4.1.230.5.1.14.3.1.3	INTEGER	read-write	How to interpret addrstr (addrtype).
nvRoutemapEntry	1.3.6.1.4.1.230.5.1.14.3.1		not-accessible	routemap record.
INT nvRoutemapIndex	1.3.6.1.4.1.230.5.1.14.3.1.1	INTEGER	read-only	Index of routemap record
INT nvRoutemapMaxRec	1.3.6.1.4.1.230.5.1.14.1	INTEGER	read-only	total number of records allowed in database file.
STR nvRoutemapNetaddr	1.3.6.1.4.1.230.5.1.14.3.1.4	DisplayString	read-write	Netaddr yielded by match with addrstr.
INT nvRoutemapNumRec	1.3.6.1.4.1.230.5.1.14.2	INTEGER	read-only	number of records in use.
INT nvRoutemapStatus	1.3.6.1.4.1.230.5.1.14.3.1.6	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvRoutemapTable	1.3.6.1.4.1.230.5.1.14.3		not-accessible	routemap file.
STR nvRoutemapUserdata	1.3.6.1.4.1.230.5.1.14.3.1.5	DisplayString	read-write	Userdata yielded by match with addrstr.
nvRrstat	1.3.6.1.4.1.230.5.1.31
CTR nvRrstatAvgtime	1.3.6.1.4.1.230.5.1.31.3.1.10	Counter	read-only	Average length of call in seconds.
INT nvRrstatClass	1.3.6.1.4.1.230.5.1.31.3.1.3	INTEGER	read-only	resource pool class.
CTR nvRrstatConns	1.3.6.1.4.1.230.5.1.31.3.1.5	Counter	read-only	number of connected resources.
STR nvRrstatDtreset	1.3.6.1.4.1.230.5.1.31.3.1.15	DisplayString	read-only	date & time statistics last reset
nvRrstatEntry	1.3.6.1.4.1.230.5.1.31.3.1		not-accessible	rrstat record indexed by record number.
INT nvRrstatIndex	1.3.6.1.4.1.230.5.1.31.3.1.1	INTEGER	read-only	Index of rrstat record.
CTR nvRrstatMaxcalls	1.3.6.1.4.1.230.5.1.31.3.1.6	Counter	read-only	Maximum number of connected resources.
INT nvRrstatMaxRec	1.3.6.1.4.1.230.5.1.31.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvRrstatNumbers	1.3.6.1.4.1.230.5.1.31.3.1.4	Counter	read-only	number of resources.
CTR nvRrstatNumcalls	1.3.6.1.4.1.230.5.1.31.3.1.9	Counter	read-only	Total number of calls processed.
CTR nvRrstatNumIcalls	1.3.6.1.4.1.230.5.1.31.3.1.7	Counter	read-only	Total number of incoming calls processed.
CTR nvRrstatNumOcalls	1.3.6.1.4.1.230.5.1.31.3.1.8	Counter	read-only	Total number of outgoing calls processed.
INT nvRrstatNumRec	1.3.6.1.4.1.230.5.1.31.2	INTEGER	read-only	number of records in use.
STR nvRrstatPoolname	1.3.6.1.4.1.230.5.1.31.3.1.2	DisplayString	read-only	resource pool name.
nvRrstatTable	1.3.6.1.4.1.230.5.1.31.3		not-accessible	resouce registry (system registry) status table.
CTR nvSDLIBlucnts	1.3.6.1.4.1.230.5.1.19.1.8	Counter	read-only	SDLI card port blue alarm count.
INT nvSDLICurstate	1.3.6.1.4.1.230.5.1.19.1.5	INTEGER	read-only	SDLI card port current device state.
STR nvSDLIDlitype	1.3.6.1.4.1.230.5.1.19.1.4	DisplayString	read-only	SDLI card port type such as E1 or T1.
STR nvSDLIDtreset	1.3.6.1.4.1.230.5.1.19.1.12	DisplayString	read-only	date & time statistics last reset
nvSDLIEntry	1.3.6.1.4.1.230.5.1.19.1		not-accessible	DLI statistics record.
CTR nvSDLIErrcnt	1.3.6.1.4.1.230.5.1.19.1.9	Counter	read-only	SDLI card port crc alarm count.
INT nvSDLIPortIndex	1.3.6.1.4.1.230.5.1.19.1.2	INTEGER	read-only	SDLI card port index number.
CTR nvSDLIRedcnts	1.3.6.1.4.1.230.5.1.19.1.6	Counter	read-only	SDLI card port red alarm count.
CTR nvSDLIRxfrmslp	1.3.6.1.4.1.230.5.1.19.1.11	Counter	read-only	RX Slip count.
STR nvSDLISdlinm	1.3.6.1.4.1.230.5.1.19.1.3	DisplayString	read-only	SDLI entry name such as SDLI1_I2.
INT nvSDLISlotIndex	1.3.6.1.4.1.230.5.1.19.1.1	INTEGER	read-only	SDLI slot index number.
nvSDLITable	1.3.6.1.4.1.230.5.1.19		not-accessible	DLI statistics table definition.The actual database contains 17 tables, if a DLI card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port.
CTR nvSDLITxundrun	1.3.6.1.4.1.230.5.1.19.1.10	Counter	read-only	TX underrun count.
CTR nvSDLIYelcnts	1.3.6.1.4.1.230.5.1.19.1.7	Counter	read-only	SDLI card port yellow alarm count.
STR nvSDSPDtreset	1.3.6.1.4.1.230.5.1.27.1.10	DisplayString	read-only	date & time statistics last reset
nvSDSPEntry	1.3.6.1.4.1.230.5.1.27.1		not-accessible	DLI configuration record.
CTR nvSDSPEvent1	1.3.6.1.4.1.230.5.1.27.1.15	Counter	read-only	DMOD- primary modem hs ended in abort condition.
CTR nvSDSPEvent10	1.3.6.1.4.1.230.5.1.27.1.24	Counter	read-only	DMOD- CHCRERR - with DSP Fail logic optioned.
CTR nvSDSPEvent11	1.3.6.1.4.1.230.5.1.27.1.25	Counter	read-only	DMOD- CHCRERR - with DSP Fail logic not optioned.
CTR nvSDSPEvent12	1.3.6.1.4.1.230.5.1.27.1.26	Counter	read-only	DMOD- modify action in SDSPx caused numfaicon threshold to be reached.
CTR nvSDSPEvent2	1.3.6.1.4.1.230.5.1.27.1.16	Counter	read-only	DMOD- primary modem hs ended in timeout condition.
CTR nvSDSPEvent3	1.3.6.1.4.1.230.5.1.27.1.17	Counter	read-only	DMOD- Link layer modem hs ended in abort condition.
CTR nvSDSPEvent4	1.3.6.1.4.1.230.5.1.27.1.18	Counter	read-only	DMOD- Link layer modem hs ende in timeout condition.
CTR nvSDSPEvent5	1.3.6.1.4.1.230.5.1.27.1.19	Counter	read-only	DMOD- Link layer modem hs ended in primary hs aborted condition.
CTR nvSDSPEvent6	1.3.6.1.4.1.230.5.1.27.1.20	Counter	read-only	DMOD- Command Response Timeout error.
CTR nvSDSPEvent7	1.3.6.1.4.1.230.5.1.27.1.21	Counter	read-only	DMOD- Cleardown procedure ended in timeout condition.
CTR nvSDSPEvent8	1.3.6.1.4.1.230.5.1.27.1.22	Counter	read-only	DMOD- Moniter Register timeout error.
CTR nvSDSPEvent9	1.3.6.1.4.1.230.5.1.27.1.23	Counter	read-only	DMOD- Port Up failure No SABM from DSP to start the session.
INT nvSDSPFailcaus	1.3.6.1.4.1.230.5.1.27.1.7	INTEGER	read-only	SDSP port state.
STR nvSDSPName	1.3.6.1.4.1.230.5.1.27.1.3	DisplayString	read-only	SDSP port name.
INT nvSDSPNumcalls	1.3.6.1.4.1.230.5.1.27.1.8	INTEGER	read-only	Number of calls processed on this DSP.
INT nvSDSPNumfaicon	1.3.6.1.4.1.230.5.1.27.1.5	INTEGER	read-only	number of consecutive handshake failures.
INT nvSDSPNumfnegs	1.3.6.1.4.1.230.5.1.27.1.9	INTEGER	read-only	Number of calls faild prior to negotiation start.
CTR nvSDSPNumIfailneg	1.3.6.1.4.1.230.5.1.27.1.13	Counter	read-only	Total number of failed negotiations INcoming.
CTR nvSDSPNumIncom	1.3.6.1.4.1.230.5.1.27.1.11	Counter	read-only	Total number of INcoming calls made to this DSP.
INT nvSDSPNumload	1.3.6.1.4.1.230.5.1.27.1.6	INTEGER	read-only	number of redownload attempts failed.
CTR nvSDSPNumOfailneg	1.3.6.1.4.1.230.5.1.27.1.14	Counter	read-only	Total number of failed negotiations OUTgoing.
CTR nvSDSPNumOutgo	1.3.6.1.4.1.230.5.1.27.1.12	Counter	read-only	Total number of OUTgoing calls made to this DSP.
INT nvSDSPPortIndex	1.3.6.1.4.1.230.5.1.27.1.2	INTEGER	read-only	SDSP port number.
INT nvSDSPSlotIndex	1.3.6.1.4.1.230.5.1.27.1.1	INTEGER	read-only	SDSP slot number.
INT nvSDSPState	1.3.6.1.4.1.230.5.1.27.1.4	INTEGER	read-only	CDSP port state.
nvSDSPTable	1.3.6.1.4.1.230.5.1.27		not-accessible	DSP statistics table definition.The actual database contains 17 tables, if a DSP card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port.
STR nvSFRMRCid	1.3.6.1.4.1.230.5.1.24.1.7	DisplayString	read-only	Circuit ID of Munich ports.
CTR nvSFRMRCrcerrs	1.3.6.1.4.1.230.5.1.24.1.16	Counter	read-only	Number of CRC errors.
STR nvSFRMRDtreset	1.3.6.1.4.1.230.5.1.24.1.18	DisplayString	read-only	date & time statistics last reset
nvSFRMREntry	1.3.6.1.4.1.230.5.1.24.1		not-accessible	Framer card statistics record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active.
INT nvSFRMRFerrs	1.3.6.1.4.1.230.5.1.24.1.13	INTEGER	read-only	FERRS
CTR nvSFRMRLostfrms	1.3.6.1.4.1.230.5.1.24.1.12	Counter	read-only	Number of lost frames.
INT nvSFRMRMode	1.3.6.1.4.1.230.5.1.24.1.4	INTEGER	read-only	The operation mode.
STR nvSFRMRName	1.3.6.1.4.1.230.5.1.24.1.3	DisplayString	read-only	The name of a framer card port.
INT nvSFRMRNrxoff	1.3.6.1.4.1.230.5.1.24.1.10	INTEGER	read-only	RNRXOFF
INT nvSFRMRNtxoff	1.3.6.1.4.1.230.5.1.24.1.11	INTEGER	read-only	RNTXOFF
INT nvSFRMRPerrs	1.3.6.1.4.1.230.5.1.24.1.14	INTEGER	read-only	PERRS
INT nvSFRMRPortIndex	1.3.6.1.4.1.230.5.1.24.1.2	INTEGER	read-only	For static port, the index number is from 1 to 2. For smart port type, the index number is from 3 to 130.
INT nvSFRMRRate	1.3.6.1.4.1.230.5.1.24.1.6	INTEGER	read-only	Framer card port baud rate.
CTR nvSFRMRRxaborts	1.3.6.1.4.1.230.5.1.24.1.17	Counter	read-only	Number of receive aborte frames.
INT nvSFRMRRxoff	1.3.6.1.4.1.230.5.1.24.1.8	INTEGER	read-only	RXOFF
CTR nvSFRMRRxovrs	1.3.6.1.4.1.230.5.1.24.1.15	Counter	read-only	Number of receive overruns frames.
INT nvSFRMRSlotIndex	1.3.6.1.4.1.230.5.1.24.1.1	INTEGER	read-only	Framer card slot number.
INT nvSFRMRState	1.3.6.1.4.1.230.5.1.24.1.5	INTEGER	read-only	The operation state.
nvSFRMRTable	1.3.6.1.4.1.230.5.1.24		not-accessible	Framer card statistics table definition. The actual framer card database has 17 tables. Each table uses name convention: SFRMR plus slot number. Each framer card has two static WAN ports and 128 smart ports. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires two instances: slot and port number.
INT nvSFRMRTxoff	1.3.6.1.4.1.230.5.1.24.1.9	INTEGER	read-only	TXOFF
nvSlotstat	1.3.6.1.4.1.230.5.1.25
STR nvSlotstatCardid	1.3.6.1.4.1.230.5.1.25.3.1.8	DisplayString	read-only	Card id from eeprom.
INT nvSlotstatCardType	1.3.6.1.4.1.230.5.1.25.3.1.3	INTEGER	read-only	Slot card type.
STR nvSlotstatCatPartnum	1.3.6.1.4.1.230.5.1.25.3.1.10	DisplayString	read-only	Catalog part number.
INT nvSlotstatCpu	1.3.6.1.4.1.230.5.1.25.3.1.5	INTEGER	read-only	Slot IO type.
nvSlotstatEntry	1.3.6.1.4.1.230.5.1.25.3.1		not-accessible	Nevada product is a 17 slot chassis. Each slot can be plugged in a communication card module. The module can be a Host Packet, Framer or DLI card module. The system can have only one Host Module and up to two Framer card module. This table contains statistics information for each slot.
STR nvSlotstatHwRevision	1.3.6.1.4.1.230.5.1.25.3.1.9	DisplayString	read-only	Hardware Revision of the board.
INT nvSlotstatIndex	1.3.6.1.4.1.230.5.1.25.3.1.1	INTEGER	read-only	Slot index number.
INT nvSlotstatIotype	1.3.6.1.4.1.230.5.1.25.3.1.4	INTEGER	read-only	Slot IO type.
INT nvSlotstatMaxRec	1.3.6.1.4.1.230.5.1.25.1	INTEGER	read-only	total number of records allowed in database file.
STR nvSlotstatName	1.3.6.1.4.1.230.5.1.25.3.1.2	DisplayString	read-only	Slot name.
INT nvSlotstatNumRec	1.3.6.1.4.1.230.5.1.25.2	INTEGER	read-only	number of records in use.
STR nvSlotstatProdChkDate	1.3.6.1.4.1.230.5.1.25.3.1.12	DisplayString	read-only	Production Check Date.
STR nvSlotstatRam	1.3.6.1.4.1.230.5.1.25.3.1.6	DisplayString	read-only	Amount of RAM on card.
STR nvSlotstatSrNumber	1.3.6.1.4.1.230.5.1.25.3.1.11	DisplayString	read-only	Serial Number.
INT nvSlotstatStatus	1.3.6.1.4.1.230.5.1.25.3.1.7	INTEGER	read-only	Status of card as given by bats. good(1), -- Card is working failure(2), -- Card is failing notPowered(3), -- Power Supply -48 volts not supplied notapplicable(4) -- not applicable
nvSlotstatTable	1.3.6.1.4.1.230.5.1.25.3		not-accessible	Slot statistics table definition.
nvSnmpconf	1.3.6.1.4.1.230.5.45.1
INT nvSnmpconfauthen	1.3.6.1.4.1.230.5.45.1.3.1.5	INTEGER	read-write	authentication trap yes(1)/no(2)
STR nvSnmpconfcontact	1.3.6.1.4.1.230.5.45.1.3.1.3	DisplayString	read-write	contact
nvSnmpconfEntry	1.3.6.1.4.1.230.5.45.1.3.1		not-accessible	Snmpconf record.
INT nvSnmpconfIndex	1.3.6.1.4.1.230.5.45.1.3.1.1	INTEGER	read-only	Index of nvSnmpconf record
STR nvSnmpconflocation	1.3.6.1.4.1.230.5.45.1.3.1.2	DisplayString	read-write	Location
INT nvSnmpconfMaxRec	1.3.6.1.4.1.230.5.45.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvSnmpconfNumRec	1.3.6.1.4.1.230.5.45.1.2	INTEGER	read-only	number of records in use.
INT nvSnmpconfstatus	1.3.6.1.4.1.230.5.45.1.3.1.6	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
STR nvSnmpconfsysname	1.3.6.1.4.1.230.5.45.1.3.1.4	DisplayString	read-write	sysname
nvSnmpconfTable	1.3.6.1.4.1.230.5.45.1.3		not-accessible	Snmpconf file.
nvSnmpmgr	1.3.6.1.4.1.230.5.45.2
INT nvSnmpmgrAccPriv	1.3.6.1.4.1.230.5.45.2.3.1.4	INTEGER	read-write	Access priv
STR nvSnmpmgrComm	1.3.6.1.4.1.230.5.45.2.3.1.3	DisplayString	read-write	community
nvSnmpmgrEntry	1.3.6.1.4.1.230.5.45.2.3.1		not-accessible	Snmpmgr record.
INT nvSnmpmgrIndex	1.3.6.1.4.1.230.5.45.2.3.1.1	INTEGER	read-only	Index of nvSnmpmgr record
STR nvSnmpmgrIp	1.3.6.1.4.1.230.5.45.2.3.1.2	DisplayString	read-write	IP address
INT nvSnmpmgrMaxRec	1.3.6.1.4.1.230.5.45.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvSnmpmgrNumRec	1.3.6.1.4.1.230.5.45.2.2	INTEGER	read-only	number of records in use.
INT nvSnmpmgrSndTrap	1.3.6.1.4.1.230.5.45.2.3.1.5	INTEGER	read-write	Send trap
INT nvSnmpmgrstatus	1.3.6.1.4.1.230.5.45.2.3.1.6	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvSnmpmgrTable	1.3.6.1.4.1.230.5.45.2.3		not-accessible	Snmpmgr file.
INT nvStartScript	1.3.6.1.4.1.230.5.65.5	INTEGER	read-write	Script Number to Start
nvString	1.3.6.1.4.1.230.5.65.6
STR nvStringData	1.3.6.1.4.1.230.5.65.6.3.1.2	DisplayString	read-write	The data in the specific string, size up to 256
nvStringEntry	1.3.6.1.4.1.230.5.65.6.3.1		not-accessible	Nevada String record.
INT nvStringIndex	1.3.6.1.4.1.230.5.65.6.3.1.1	INTEGER	read-only	Index of Nevada String record
INT nvStringMaxRec	1.3.6.1.4.1.230.5.65.6.1	INTEGER	read-only	total number of records available for all strings allowed in database file.
INT nvStringNumRec	1.3.6.1.4.1.230.5.65.6.2	INTEGER	read-only	number of highest record in use.
INT nvStringStatus	1.3.6.1.4.1.230.5.65.6.3.1.3	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvStringTable	1.3.6.1.4.1.230.5.65.6.3		not-accessible	Nevada String List file.
nvSymuser	1.3.6.1.4.1.230.5.1.7
nvSymuserEntry	1.3.6.1.4.1.230.5.1.7.3.1		not-accessible	symuser record.
INT nvSymuserIndex	1.3.6.1.4.1.230.5.1.7.3.1.1	INTEGER	read-only	Index of symuser record
INT nvSymuserMaxRec	1.3.6.1.4.1.230.5.1.7.1	INTEGER	read-only	total number of records allowed in database file.
INT nvSymuserNumRec	1.3.6.1.4.1.230.5.1.7.2	INTEGER	read-only	number of records in use.
STR nvSymuserPassword	1.3.6.1.4.1.230.5.1.7.3.1.3	DisplayString	read-write	User Password (password) User password. After a user name is matched,the user is asked to enter their assigned password. If it is not entered correctly,the call is cleared.
INT nvSymuserStatus	1.3.6.1.4.1.230.5.1.7.3.1.5	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvSymuserTable	1.3.6.1.4.1.230.5.1.7.3		not-accessible	symuser file.
STR nvSymuserUsername	1.3.6.1.4.1.230.5.1.7.3.1.2	DisplayString	read-write	User Name (username) Name of user allowed to use system management functions. The System Manager Interface attempts to match the call user data field of an incoming call against the entries in this file. If no match is found, the call is cleared.
nvTcpcnstat	1.3.6.1.4.1.230.5.17.2
STR nvTcpcnstatDtreset	1.3.6.1.4.1.230.5.17.2.3.1.7	DisplayString	read-only	date & time statistics last reset
nvTcpcnstatEntry	1.3.6.1.4.1.230.5.17.2.3.1		not-accessible	tcpcnstat record, indexed by record number
INT nvTcpcnstatIndex	1.3.6.1.4.1.230.5.17.2.3.1.1	INTEGER	read-only	Index of tcpcnstat record
STR nvTcpcnstatLocaladdr	1.3.6.1.4.1.230.5.17.2.3.1.3	DisplayString	read-only	Local host address.
INT nvTcpcnstatLocalport	1.3.6.1.4.1.230.5.17.2.3.1.4	INTEGER	read-only	Local port.
INT nvTcpcnstatMaxRec	1.3.6.1.4.1.230.5.17.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTcpcnstatNumRec	1.3.6.1.4.1.230.5.17.2.2	INTEGER	read-only	number of records in use.
STR nvTcpcnstatRemaddr	1.3.6.1.4.1.230.5.17.2.3.1.5	DisplayString	read-only	Remote host address.
INT nvTcpcnstatRemport	1.3.6.1.4.1.230.5.17.2.3.1.6	INTEGER	read-only	Remote port.
INT nvTcpcnstatState	1.3.6.1.4.1.230.5.17.2.3.1.2	INTEGER	read-only	Connection state.
nvTcpcnstatTable	1.3.6.1.4.1.230.5.17.2.3		not-accessible	tcpcnstat file.
nvTcpprof	1.3.6.1.4.1.230.5.17.8
nvTcpprofEntry	1.3.6.1.4.1.230.5.17.8.3.1		not-accessible	tcpprof record, indexed by record number
INT nvTcpprofIndex	1.3.6.1.4.1.230.5.17.8.3.1.1	INTEGER	read-only	Index of tslotconf record
INT nvTcpprofKeepidle	1.3.6.1.4.1.230.5.17.8.3.1.3	INTEGER	read-write	Idle time in seconds before keepalive probe.
INT nvTcpprofKeepintvl	1.3.6.1.4.1.230.5.17.8.3.1.5	INTEGER	read-write	Interval in seconds between keppalive probes.
INT nvTcpprofKeepprbs	1.3.6.1.4.1.230.5.17.8.3.1.4	INTEGER	read-write	Number of unanswered probes before reset.
INT nvTcpprofMaxRec	1.3.6.1.4.1.230.5.17.8.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTcpprofNumRec	1.3.6.1.4.1.230.5.17.8.2	INTEGER	read-only	number of records in use.
STR nvTcpprofProfname	1.3.6.1.4.1.230.5.17.8.3.1.2	DisplayString	read-write	Nmae of TCP profile.
INT nvTcpprofStatus	1.3.6.1.4.1.230.5.17.8.3.1.6	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvTcpprofTable	1.3.6.1.4.1.230.5.17.8.3		not-accessible	tcpprof file.
nvTcprstat	1.3.6.1.4.1.230.5.17.3
STR nvTcprstatDtreset	1.3.6.1.4.1.230.5.17.3.3.1.5	DisplayString	read-only	date & time statistics last reset
nvTcprstatEntry	1.3.6.1.4.1.230.5.17.3.3.1		not-accessible	tcprstat record, indexed by record number
INT nvTcprstatIndex	1.3.6.1.4.1.230.5.17.3.3.1.1	INTEGER	read-only	Index of tcprstat record
INT nvTcprstatInport	1.3.6.1.4.1.230.5.17.3.3.1.2	INTEGER	read-only	Port number to check for traffic from IP.
INT nvTcprstatMaxRec	1.3.6.1.4.1.230.5.17.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTcprstatNumRec	1.3.6.1.4.1.230.5.17.3.2	INTEGER	read-only	number of records in use.
INT nvTcprstatOutport	1.3.6.1.4.1.230.5.17.3.3.1.3	INTEGER	read-only	Port number to route call to if inport match.
STR nvTcprstatService	1.3.6.1.4.1.230.5.17.3.3.1.4	DisplayString	read-only	component using the port number.
nvTcprstatTable	1.3.6.1.4.1.230.5.17.3.3		not-accessible	tcprstat file.
nvTcpstat	1.3.6.1.4.1.230.5.17.1
CTR nvTcpstatAccepts	1.3.6.1.4.1.230.5.17.1.3.1.3	Counter	read-only	connections accepted.
CTR nvTcpstatCloseds	1.3.6.1.4.1.230.5.17.1.3.1.7	Counter	read-only	conn closed inlc drops.
CTR nvTcpstatConnattempts	1.3.6.1.4.1.230.5.17.1.3.1.2	Counter	read-only	connection attempts made.
CTR nvTcpstatConndrops	1.3.6.1.4.1.230.5.17.1.3.1.6	Counter	read-only	embryonic conns dropped.
CTR nvTcpstatConnects	1.3.6.1.4.1.230.5.17.1.3.1.4	Counter	read-only	connections established.
CTR nvTcpstatDelacks	1.3.6.1.4.1.230.5.17.1.3.1.10	Counter	read-only	delayed acls sent.
CTR nvTcpstatDrops	1.3.6.1.4.1.230.5.17.1.3.1.5	Counter	read-only	connections dropped.
STR nvTcpstatDtreset	1.3.6.1.4.1.230.5.17.1.3.1.48	DisplayString	read-only	date & time statistics last reset
nvTcpstatEntry	1.3.6.1.4.1.230.5.17.1.3.1		not-accessible	tcpstat record, indexed by record number
INT nvTcpstatIndex	1.3.6.1.4.1.230.5.17.1.3.1.1	INTEGER	read-only	Index of tcpstat record
CTR nvTcpstatKeepdrops	1.3.6.1.4.1.230.5.17.1.3.1.16	Counter	read-only	connections dropped in keep alive.
CTR nvTcpstatKeepprobes	1.3.6.1.4.1.230.5.17.1.3.1.15	Counter	read-only	keepalive probes sent.
CTR nvTcpstatKeeptimeos	1.3.6.1.4.1.230.5.17.1.3.1.14	Counter	read-only	keepalive timeouts.
INT nvTcpstatMaxRec	1.3.6.1.4.1.230.5.17.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTcpstatNumRec	1.3.6.1.4.1.230.5.17.1.2	INTEGER	read-only	number of records in use.
CTR nvTcpstatPersisttimeos	1.3.6.1.4.1.230.5.17.1.3.1.13	Counter	read-only	persist timeouts.
CTR nvTcpstatRcvackbytes	1.3.6.1.4.1.230.5.17.1.3.1.46	Counter	read-only	bytes acked by rcvd acks.
CTR nvTcpstatRcvackpacks	1.3.6.1.4.1.230.5.17.1.3.1.45	Counter	read-only	rcvd ack packets.
CTR nvTcpstatRcvacktoomuchs	1.3.6.1.4.1.230.5.17.1.3.1.44	Counter	read-only	rcvd acks for unsent data.
CTR nvTcpstatRcvaftercloses	1.3.6.1.4.1.230.5.17.1.3.1.41	Counter	read-only	packets rcvd after close.
CTR nvTcpstatRcvbadoffs	1.3.6.1.4.1.230.5.17.1.3.1.31	Counter	read-only	packets rcvd with bad offset.
CTR nvTcpstatRcvbadsums	1.3.6.1.4.1.230.5.17.1.3.1.30	Counter	read-only	packets rcvd with cksum errors.
CTR nvTcpstatRcvbyteafterwins	1.3.6.1.4.1.230.5.17.1.3.1.40	Counter	read-only	bytes rcvd after window.
CTR nvTcpstatRcvbytes	1.3.6.1.4.1.230.5.17.1.3.1.29	Counter	read-only	bytes rcvd in sequence.
CTR nvTcpstatRcvdupacks	1.3.6.1.4.1.230.5.17.1.3.1.43	Counter	read-only	rcvd duplicate acks.
CTR nvTcpstatRcvdupbytes	1.3.6.1.4.1.230.5.17.1.3.1.34	Counter	read-only	dup only bytes rcvd.
CTR nvTcpstatRcvduppacks	1.3.6.1.4.1.230.5.17.1.3.1.33	Counter	read-only	dup only packets rcvd.
CTR nvTcpstatRcvoobytes	1.3.6.1.4.1.230.5.17.1.3.1.38	Counter	read-only	out of order bytes rcvd.
CTR nvTcpstatRcvoopacks	1.3.6.1.4.1.230.5.17.1.3.1.37	Counter	read-only	out of order packets rcvd.
CTR nvTcpstatRcvpackafterwins	1.3.6.1.4.1.230.5.17.1.3.1.39	Counter	read-only	packets rcvd after window.
CTR nvTcpstatRcvpacks	1.3.6.1.4.1.230.5.17.1.3.1.28	Counter	read-only	packets rcvd in sequence.
CTR nvTcpstatRcvpartdupbytes	1.3.6.1.4.1.230.5.17.1.3.1.36	Counter	read-only	dup bytes in part dup packets.
CTR nvTcpstatRcvpartduppacks	1.3.6.1.4.1.230.5.17.1.3.1.35	Counter	read-only	packets with some dup data.
CTR nvTcpstatRcvshorts	1.3.6.1.4.1.230.5.17.1.3.1.32	Counter	read-only	packets rcvd too short.
CTR nvTcpstatRcvtotals	1.3.6.1.4.1.230.5.17.1.3.1.27	Counter	read-only	total packets rcvd.
CTR nvTcpstatRcvwinprobes	1.3.6.1.4.1.230.5.17.1.3.1.42	Counter	read-only	rcvd window probe packets.
CTR nvTcpstatRcvwinupds	1.3.6.1.4.1.230.5.17.1.3.1.47	Counter	read-only	rcvd window update pkts.
CTR nvTcpstatRexmttimeos	1.3.6.1.4.1.230.5.17.1.3.1.12	Counter	read-only	retransmit timeouts.
CTR nvTcpstatRttupdateds	1.3.6.1.4.1.230.5.17.1.3.1.9	Counter	read-only	times succeeded.
CTR nvTcpstatSegstimeds	1.3.6.1.4.1.230.5.17.1.3.1.8	Counter	read-only	segs where tried to get rt.
CTR nvTcpstatSndacks	1.3.6.1.4.1.230.5.17.1.3.1.22	Counter	read-only	ack only packets sent.
CTR nvTcpstatSndbytes	1.3.6.1.4.1.230.5.17.1.3.1.19	Counter	read-only	data bytes sent.
CTR nvTcpstatSndctrls	1.3.6.1.4.1.230.5.17.1.3.1.26	Counter	read-only	control SYN\|FIN\|RST packets.
CTR nvTcpstatSndpacks	1.3.6.1.4.1.230.5.17.1.3.1.18	Counter	read-only	data packets sent.
CTR nvTcpstatSndprobes	1.3.6.1.4.1.230.5.17.1.3.1.23	Counter	read-only	window probes sent.
CTR nvTcpstatSndrexmitbytes	1.3.6.1.4.1.230.5.17.1.3.1.21	Counter	read-only	data bytes retransmitted.
CTR nvTcpstatSndrexmitpacks	1.3.6.1.4.1.230.5.17.1.3.1.20	Counter	read-only	data packetes retransmitted.
CTR nvTcpstatSndtotals	1.3.6.1.4.1.230.5.17.1.3.1.17	Counter	read-only	total packets sent.
CTR nvTcpstatSndurgs	1.3.6.1.4.1.230.5.17.1.3.1.24	Counter	read-only	packets sent with urg only.
CTR nvTcpstatSndwinups	1.3.6.1.4.1.230.5.17.1.3.1.25	Counter	read-only	window update only packets.
nvTcpstatTable	1.3.6.1.4.1.230.5.17.1.3		not-accessible	tcpstat file.
CTR nvTcpstatTimeoutdrops	1.3.6.1.4.1.230.5.17.1.3.1.11	Counter	read-only	conn dropped in rxmt timeout.
nvTncconf	1.3.6.1.4.1.230.5.20.5
INT nvTncconfAyt	1.3.6.1.4.1.230.5.20.5.3.1.13	INTEGER	read-write	decimal number of character to use for ayt (ayt)
STR nvTncconfDnsaddr	1.3.6.1.4.1.230.5.20.5.3.1.15	DisplayString	read-write	Dnsaddr
INT nvTncconfEcho	1.3.6.1.4.1.230.5.20.5.3.1.7	INTEGER	read-write	decimal number of character to use for echo (echo)
nvTncconfEntry	1.3.6.1.4.1.230.5.20.5.3.1		not-accessible	nevada node Tncconf record.
INT nvTncconfErase	1.3.6.1.4.1.230.5.20.5.3.1.11	INTEGER	read-write	decimal number of character to use for erase (erase)
INT nvTncconfEscape	1.3.6.1.4.1.230.5.20.5.3.1.6	INTEGER	read-write	decimal number of character to use for escape (escape)
INT nvTncconfFout	1.3.6.1.4.1.230.5.20.5.3.1.10	INTEGER	read-write	decimal number of character to use for flushoutput (fout)
INT nvTncconfIdletim	1.3.6.1.4.1.230.5.20.5.3.1.5	INTEGER	read-write	forwarding timer used in character at a time (idletim)
INT nvTncconfIndex	1.3.6.1.4.1.230.5.20.5.3.1.1	INTEGER	read-only	Index of Telnet Client record
INT nvTncconfInterrupt	1.3.6.1.4.1.230.5.20.5.3.1.8	INTEGER	read-write	decimal number of character to use for interrupt (interrupt)
INT nvTncconfKill	1.3.6.1.4.1.230.5.20.5.3.1.12	INTEGER	read-write	decimal number of character to use for kill (kill)
INT nvTncconfMaxRec	1.3.6.1.4.1.230.5.20.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTncconfNumRec	1.3.6.1.4.1.230.5.20.5.2	INTEGER	read-only	number of records in use.
INT nvTncconfNumSess	1.3.6.1.4.1.230.5.20.5.3.1.2	INTEGER	read-only	number of simultaneous sessions (numSess)
INT nvTncconfQuit	1.3.6.1.4.1.230.5.20.5.3.1.9	INTEGER	read-write	decimal number of character to use for quit (quit)
INT nvTncconfSetact	1.3.6.1.4.1.230.5.20.5.3.1.4	INTEGER	read-write	allow user to perform set actions (setact)
INT nvTncconfStatus	1.3.6.1.4.1.230.5.20.5.3.1.16	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
INT nvTncconfSuspend	1.3.6.1.4.1.230.5.20.5.3.1.14	INTEGER	read-write	decimal number of character to use for suspend (suspend)
nvTncconfTable	1.3.6.1.4.1.230.5.20.5.3		not-accessible	Nevada Telnet cconf file.
INT nvTncconfX3parms	1.3.6.1.4.1.230.5.20.5.3.1.3	INTEGER	read-write	string of X.3 params to send at start (x3parms)
nvTnclass	1.3.6.1.4.1.230.5.20.2
INT nvTnclassAobreak	1.3.6.1.4.1.230.5.20.2.3.1.4	INTEGER	read-write	Telnet abort cmd issues break
STR nvTnclassClassname	1.3.6.1.4.1.230.5.20.2.3.1.2	DisplayString	read-write	Telnet classname
nvTnclassEntry	1.3.6.1.4.1.230.5.20.2.3.1		not-accessible	Nevada node Telnet record.
INT nvTnclassGoahead	1.3.6.1.4.1.230.5.20.2.3.1.7	INTEGER	read-write	Telnet suppress/send Go Ahead cmd
INT nvTnclassIndex	1.3.6.1.4.1.230.5.20.2.3.1.1	INTEGER	read-only	Index of Telenet class record
INT nvTnclassIpcmd	1.3.6.1.4.1.230.5.20.2.3.1.5	INTEGER	read-write	Telnet interrupt process cmd
INT nvTnclassMaxRec	1.3.6.1.4.1.230.5.20.2.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTnclassNumRec	1.3.6.1.4.1.230.5.20.2.2	INTEGER	read-only	number of records in use.
INT nvTnclassStatus	1.3.6.1.4.1.230.5.20.2.3.1.9	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvTnclassTable	1.3.6.1.4.1.230.5.20.2.3		not-accessible	Nevada Telnet class file.
nvTncmap	1.3.6.1.4.1.230.5.20.6
nvTncmapEntry	1.3.6.1.4.1.230.5.20.6.3.1		not-accessible	Nevada node Telnet cstat record.
INT nvTncmapIndex	1.3.6.1.4.1.230.5.20.6.3.1.1	INTEGER	read-only	Index of Telnet Client map record
STR nvTncmapIpaddr	1.3.6.1.4.1.230.5.20.6.3.1.4	DisplayString	read-write
INT nvTncmapMaxRec	1.3.6.1.4.1.230.5.20.6.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTncmapMode	1.3.6.1.4.1.230.5.20.6.3.1.7	INTEGER	read-write
STR nvTncmapNetad	1.3.6.1.4.1.230.5.20.6.3.1.2	DisplayString	read-write
INT nvTncmapNumRec	1.3.6.1.4.1.230.5.20.6.2	INTEGER	read-only	number of records in use.
INT nvTncmapSecure	1.3.6.1.4.1.230.5.20.6.3.1.9	INTEGER	read-write	security opreation enabled
INT nvTncmapStatus	1.3.6.1.4.1.230.5.20.6.3.1.8	INTEGER	read-write
nvTncmapTable	1.3.6.1.4.1.230.5.20.6.3		not-accessible	Nevada Telnet cstat file.
STR nvTncmapTcppn	1.3.6.1.4.1.230.5.20.6.3.1.5	DisplayString	read-write
STR nvTncmapUsdata	1.3.6.1.4.1.230.5.20.6.3.1.3	DisplayString	read-write
INT nvTncmapX3parms	1.3.6.1.4.1.230.5.20.6.3.1.6	INTEGER	read-write
nvTnconf	1.3.6.1.4.1.230.5.20.1
STR nvTnconfDefiticlass	1.3.6.1.4.1.230.5.20.1.3.1.4	DisplayString	read-write	Default iti class
INT nvTnconfDefmaxbspace	1.3.6.1.4.1.230.5.20.1.3.1.6	INTEGER	read-write	number of simultaneous sessions
INT nvTnconfDefminbspace	1.3.6.1.4.1.230.5.20.1.3.1.5	INTEGER	read-write	number of simultaneous sessions
STR nvTnconfDeftnclass	1.3.6.1.4.1.230.5.20.1.3.1.3	DisplayString	read-write	Default telnet class
nvTnconfEntry	1.3.6.1.4.1.230.5.20.1.3.1		not-accessible	Nevada node Telnet record.
INT nvTnconfIndex	1.3.6.1.4.1.230.5.20.1.3.1.1	INTEGER	read-only	Index of Telenet conf record
INT nvTnconfMaxRec	1.3.6.1.4.1.230.5.20.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTnconfNumRec	1.3.6.1.4.1.230.5.20.1.2	INTEGER	read-only	number of records in use.
INT nvTnconfNumSess	1.3.6.1.4.1.230.5.20.1.3.1.2	INTEGER	read-only	number of simultaneous sessions
nvTnconfTable	1.3.6.1.4.1.230.5.20.1.3		not-accessible	Nevada Telnet config file.
nvTncstat	1.3.6.1.4.1.230.5.20.7
STR nvTncstatCalladdr	1.3.6.1.4.1.230.5.20.7.3.1.5	DisplayString	read-only	x121 address calling TELNET Client
STR nvTncstatCalldata	1.3.6.1.4.1.230.5.20.7.3.1.6	DisplayString	read-only	call user data
INT nvTncstatDnsidx	1.3.6.1.4.1.230.5.20.7.3.1.4	INTEGER	read-only	dnsindex
nvTncstatEntry	1.3.6.1.4.1.230.5.20.7.3.1		not-accessible	Nevada node Telnet cstat record.
INT nvTncstatIndex	1.3.6.1.4.1.230.5.20.7.3.1.1	INTEGER	read-only	Index of Telnet Client stat record
STR nvTncstatIpaddr	1.3.6.1.4.1.230.5.20.7.3.1.7	DisplayString	read-only	ip address connected to
INT nvTncstatMaxRec	1.3.6.1.4.1.230.5.20.7.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTncstatMode	1.3.6.1.4.1.230.5.20.7.3.1.9	INTEGER	read-only	mode in use
INT nvTncstatNumRec	1.3.6.1.4.1.230.5.20.7.2	INTEGER	read-only	number of records in use.
INT nvTncstatPortnum	1.3.6.1.4.1.230.5.20.7.3.1.8	INTEGER	read-only	Port number connected to
INT nvTncstatSessnum	1.3.6.1.4.1.230.5.20.7.3.1.2	INTEGER	read-only	the number of the session
INT nvTncstatStatus	1.3.6.1.4.1.230.5.20.7.3.1.3	INTEGER	read-only	Call status
nvTncstatTable	1.3.6.1.4.1.230.5.20.7.3		not-accessible	Nevada Telnet cstat file.
INT nvTncstatX29err	1.3.6.1.4.1.230.5.20.7.3.1.10	INTEGER	read-only	last X29 error rcvd from 3XPAD
nvTnmap	1.3.6.1.4.1.230.5.20.3
nvTnmapEntry	1.3.6.1.4.1.230.5.20.3.3.1		not-accessible	Nevada node Telnet map record.
INT nvTnmapIndex	1.3.6.1.4.1.230.5.20.3.3.1.1	INTEGER	read-only	Index of Telenet map record
STR nvTnmapIticlass	1.3.6.1.4.1.230.5.20.3.3.1.4	DisplayString	read-write	Telnet iti classname
INT nvTnmapMaxRec	1.3.6.1.4.1.230.5.20.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTnmapNumRec	1.3.6.1.4.1.230.5.20.3.2	INTEGER	read-only	number of records in use.
INT nvTnmapPortnum	1.3.6.1.4.1.230.5.20.3.3.1.2	INTEGER	read-write	Telnet portnumber
INT nvTnmapStatus	1.3.6.1.4.1.230.5.20.3.3.1.5	INTEGER	read-write	Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
nvTnmapTable	1.3.6.1.4.1.230.5.20.3.3		not-accessible	Nevada Telnet map file.
STR nvTnmapTnclass	1.3.6.1.4.1.230.5.20.3.3.1.3	DisplayString	read-write	Telnet classname
nvTnnlconf	1.3.6.1.4.1.230.5.1.16
nvTnnlconfEntry	1.3.6.1.4.1.230.5.1.16.3.1		not-accessible	A tunnel table entry containing objects which configure a tunnel protocol.
INT nvTnnlconfIndex	1.3.6.1.4.1.230.5.1.16.3.1.1	INTEGER	read-only	Backhaul configuration entry index number.
INT nvTnnlconfLineprot	1.3.6.1.4.1.230.5.1.16.3.1.5	INTEGER	read-write	Backhaul line protocol.
INT nvTnnlconfMaxRec	1.3.6.1.4.1.230.5.1.16.1	INTEGER	read-only	total number of records allowed in database file.
STR nvTnnlconfNetaddr	1.3.6.1.4.1.230.5.1.16.3.1.9	DisplayString	read-write	Backhaul network address when rtmethod is useconfig.
INT nvTnnlconfNumRec	1.3.6.1.4.1.230.5.1.16.2	INTEGER	read-only	number of records in use.
STR nvTnnlconfPortname	1.3.6.1.4.1.230.5.1.16.3.1.2	DisplayString	read-write	Port name (portname)
INT nvTnnlconfProt	1.3.6.1.4.1.230.5.1.16.3.1.6	INTEGER	read-write	Backhaul line protocol.
STR nvTnnlconfRsrcpool	1.3.6.1.4.1.230.5.1.16.3.1.3	DisplayString	read-write	Resource pool name.
INT nvTnnlconfRtmethod	1.3.6.1.4.1.230.5.1.16.3.1.7	INTEGER	read-write	Backhaul routing protocol.
INT nvTnnlconfStatus	1.3.6.1.4.1.230.5.1.16.3.1.11	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvTnnlconfTable	1.3.6.1.4.1.230.5.1.16.3		not-accessible	Backhaul instance table definition.
STR nvTnnlconfUserdata	1.3.6.1.4.1.230.5.1.16.3.1.10	DisplayString	read-write	Backhaul configuration user data.
nvTnnlstat	1.3.6.1.4.1.230.5.1.17
CTR nvTnnlstatCallattfs	1.3.6.1.4.1.230.5.1.17.3.1.10	Counter	read-only	No of failed attempts to place current call.
CTR nvTnnlstatCallatts	1.3.6.1.4.1.230.5.1.17.3.1.9	Counter	read-only	No of attempts to place current call.
INT nvTnnlstatConnstat	1.3.6.1.4.1.230.5.1.17.3.1.4	INTEGER	read-only	Current connection status.
STR nvTnnlstatDtreset	1.3.6.1.4.1.230.5.1.17.3.1.13	DisplayString	read-only	date & time statistics last reset
nvTnnlstatEntry	1.3.6.1.4.1.230.5.1.17.3.1		not-accessible	A tunnel status table entry containing fields which store tunnel status information.
INT nvTnnlstatfMaxRec	1.3.6.1.4.1.230.5.1.17.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTnnlstatIndex	1.3.6.1.4.1.230.5.1.17.3.1.1	INTEGER	read-only	Backhaul status entry index number.
CTR nvTnnlstatInframes	1.3.6.1.4.1.230.5.1.17.3.1.11	Counter	read-only	No of frames switched from line to tunnel route.
STR nvTnnlstatNetaddr	1.3.6.1.4.1.230.5.1.17.3.1.6	DisplayString	read-only	Network address to which call was routed.
INT nvTnnlstatNumRec	1.3.6.1.4.1.230.5.1.17.2	INTEGER	read-only	number of records in use.
CTR nvTnnlstatOutframes	1.3.6.1.4.1.230.5.1.17.3.1.12	Counter	read-only	No of frames switched from tunnel route to line.
STR nvTnnlstatPortname	1.3.6.1.4.1.230.5.1.17.3.1.2	DisplayString	read-only	Port on which this Backhaul status entry is applied.
STR nvTnnlstatRsrcpool	1.3.6.1.4.1.230.5.1.17.3.1.3	DisplayString	read-only	Resource pool on which this Backhaul status entry is applied.
STR nvTnnlstatRtstring	1.3.6.1.4.1.230.5.1.17.3.1.5	DisplayString	read-only	String upon which routing was based.
nvTnnlstatTable	1.3.6.1.4.1.230.5.1.17.3		not-accessible	Backhaul instance status table definition.
STR nvTnnlstatUserdata	1.3.6.1.4.1.230.5.1.17.3.1.7	DisplayString	read-only	User data to which call was routed.
nvTnstat	1.3.6.1.4.1.230.5.20.4
STR nvTnstatClientAddr	1.3.6.1.4.1.230.5.20.4.3.1.7	DisplayString	read-only	Address of the Client.
nvTnstatEntry	1.3.6.1.4.1.230.5.20.4.3.1		not-accessible	Nevada node Telnet stat record.
INT nvTnstatIndex	1.3.6.1.4.1.230.5.20.4.3.1.1	INTEGER	read-only	Index of Telenet stat record
STR nvTnstatLastCmd	1.3.6.1.4.1.230.5.20.4.3.1.5	DisplayString	read-only	Telnet last cmd received
INT nvTnstatMaxRec	1.3.6.1.4.1.230.5.20.4.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTnstatMode	1.3.6.1.4.1.230.5.20.4.3.1.4	INTEGER	read-only	Telnet mode in use
INT nvTnstatNumRec	1.3.6.1.4.1.230.5.20.4.2	INTEGER	read-only	number of records in use.
STR nvTnstatOptions	1.3.6.1.4.1.230.5.20.4.3.1.6	DisplayString	read-only	Telnet active options
INT nvTnstatPortnum	1.3.6.1.4.1.230.5.20.4.3.1.2	INTEGER	read-only	Telnet portnumber in use
INT nvTnstatStatus	1.3.6.1.4.1.230.5.20.4.3.1.3	INTEGER	read-only	Telnet call status
nvTnstatTable	1.3.6.1.4.1.230.5.20.4.3		not-accessible	Nevada Telnet stat file.
NTF nvTrapAlternateConfig	1.3.6.1.4.1.230.5.2.1.0.5635			Nevada running alternate config on side `n0`
NTF nvTrapCardInserted	1.3.6.1.4.1.230.5.2.1.0.17950			Probable Cause a card has been inserted in the indicated slot Probable Effect a card has been inserted -- hotswap Recommended Action None required, informational only
nvTrapconf	1.3.6.1.4.1.230.5.64.7
STR nvTrapconfDesc	1.3.6.1.4.1.230.5.64.7.3.1.3	DisplayString	read-write	The Description of the specific trap
nvTrapconfEntry	1.3.6.1.4.1.230.5.64.7.3.1		not-accessible	Nevada Trapconf definition.
INT nvTrapconfIndex	1.3.6.1.4.1.230.5.64.7.3.1.1	INTEGER	read-only	Index for traps.. for config purpose
INT nvTrapconfMaxRec	1.3.6.1.4.1.230.5.64.7.1	INTEGER	read-only	total number of traps that have been defined
INT nvTrapconfNumRec	1.3.6.1.4.1.230.5.64.7.2	INTEGER	read-only	number of highest record in use.
INT nvTrapconfStatus	1.3.6.1.4.1.230.5.64.7.3.1.4	INTEGER	read-write	Operation status of the Trap. Use enable to generate trap and disable otherwise.
nvTrapconfTable	1.3.6.1.4.1.230.5.64.7.3		not-accessible	Nevada Traps Lists
INT nvTrapconfTrapId	1.3.6.1.4.1.230.5.64.7.3.1.2	INTEGER	read-only	The assigned enterprise trap number
NTF nvTrapDatabaseUpPrimary	1.3.6.1.4.1.230.5.2.1.0.4377			LSERVER: Database Up: primary NUA `S0`
NTF nvTrapDatabaseUpSecondary	1.3.6.1.4.1.230.5.2.1.0.4378			LSERVER: Database Up: secondary NUA `S0`
NTF nvTrapDatatimerexpird	1.3.6.1.4.1.230.5.2.1.0.4359			Probable Cause Data mode timer expired Probable Effect Recommended Action
NTF nvTrapDbautosave	1.3.6.1.4.1.230.5.2.1.0.5636			data base auto save
NTF nvTrapDbCrcError	1.3.6.1.4.1.230.5.2.1.0.5637			Nevada CRC error on database
NTF nvTrapDbsavecount	1.3.6.1.4.1.230.5.2.1.0.5638			save count is zero
NTF nvTrapDeviceConnected	1.3.6.1.4.1.230.5.2.1.0.4352			Probable Cause The port placed or accepted call with the attached device. Probable Effect Nevada has a network connection Recommended Action Network connection is now available for data transfer.
NTF nvTrapDeviceDisconnected	1.3.6.1.4.1.230.5.2.1.0.4353			Probable Cause The port disconnected with the attached device. Probable Effect Nevada does not have a network connection on the port. Recommended Action Refer stat files itipstat, iticstat, itiustat & portstat.
NTF nvTrapDSPMFailedModemThresh1	1.3.6.1.4.1.230.5.2.1.0.16896			Probable Cause Number of Modem failures has reached the configured threshold one Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration
NTF nvTrapDSPMFailedModemThresh2	1.3.6.1.4.1.230.5.2.1.0.16897			Probable Cause Number of Modem failures has reached the configured threshold two Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration
NTF nvTrapDSPMFailedModemThresh3	1.3.6.1.4.1.230.5.2.1.0.16898			Probable Cause Number of Modem failures has reached the configured threshold three Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration
NTF nvTrapDSPRFailed	1.3.6.1.4.1.230.5.2.1.0.16899			Probable Cause DSPR has failed. Probable Effect DSPR card has failed -- hardware resources failure Recommended Action Replace the DSPR card
NTF nvTrapDUIDown	1.3.6.1.4.1.230.5.2.1.0.4365			Probable Cause Both DUI Circuits down. Probable Effect Can not accept calls. Recommended Action
NTF nvTrapDuiportavail	1.3.6.1.4.1.230.5.2.1.0.4354			Probable Cause number of available ports at site Probable Effect can place calls Recommended Action place calls
NTF nvTrapElxDown	1.3.6.1.4.1.230.5.2.1.0.12033			Probable Cause ELX has gone down. Probable Effect Data can not be exchanged Recommended Action Correct configuration, cable connection or the hardware setup.
NTF nvTrapElxUp	1.3.6.1.4.1.230.5.2.1.0.12032			Probable Cause ELX has gone up. Probable Effect Data can be exchanged Recommended Action Pass data through
NTF nvTrapFrAllDLCIsUp	1.3.6.1.4.1.230.5.2.1.0.11524			Probable Cause All DLCIs on the FRI are functional. Probable Effect All FRPVCs enter data transfer state. Recommended Action All FRPVCs are available for data transfer.
NTF nvTrapFramerfailaction	1.3.6.1.4.1.230.5.2.1.0.5652			Probable Cause framer failed to do the required action Probable Effect Recommended Action
NTF nvTrapFRAMERFailed	1.3.6.1.4.1.230.5.2.1.0.5653			Probable Cause framer card in the indicated slot failed to do the requested action Probable Effect no traffic will flow Recommended Action check hardware and software configuration
NTF nvTrapFrDLCIsDown	1.3.6.1.4.1.230.5.2.1.0.11525			Probable Cause One or more DLCIs on the FRI not functional. Probable Effect Data transfer will stop on the FRPVC that has gone down. Recommended Action Refer stat files fristat, frvcstat and frstat.
NTF nvTrapFrLMIError	1.3.6.1.4.1.230.5.2.1.0.11522			Probable Cause The specified frame relay interface has detected LMI error. Probable Effect Stops PVC traffic. Recommended Action Wait for LMI to enter normal state to resume PVC traffic.
NTF nvTrapFrLMINormal	1.3.6.1.4.1.230.5.2.1.0.11523			Probable Cause The specified frame relay interface has found LMI in normal state. Probable Effect Enables PVC traffic to resume. Recommended Action The FRI is available for data transfer.
NTF nvTrapFrPortDown	1.3.6.1.4.1.230.5.2.1.0.11521			Nevada Frame Relay Interface down not-ready
NTF nvTrapFrPortUp	1.3.6.1.4.1.230.5.2.1.0.11520			Nevada Frame Relay Interface up ready
NTF nvTrapISDNFailedCalls	1.3.6.1.4.1.230.5.2.1.0.16640			Probable Cause Number of ISDN calls failure have reached the configured threshold Probable Effect ISDN failure -- results in failed ISDN calls Recommended Action check the ISDN IO cards/service provider/hardware
NTF nvTrapLeftStatus	1.3.6.1.4.1.230.5.2.1.0.5645			Nevada status value no longer met
NTF nvTrapLinkNotReady	1.3.6.1.4.1.230.5.2.1.0.4668			Probable Cause X.25 detected that the link is down. Probable Effect Data transfer over the specified link not possible Recommended Action Correct the Physical connection and/or configuration
NTF nvTrapLinkReady	1.3.6.1.4.1.230.5.2.1.0.4669			Probable Cause X.25 detected that the link has come up. Probable Effect Data transfer over the specified link possible Recommended Action New calls can now be established on this link
NTF nvTrapLocalDatabaseChanged	1.3.6.1.4.1.230.5.2.1.0.5639			Nevada local database has been changed
INT nvTrapN0	1.3.6.1.4.1.230.5.64.4	INTEGER	read-only	N0: numeric trap value
INT nvTrapN1	1.3.6.1.4.1.230.5.64.5	INTEGER	read-only	N1: numeric trap value
INT nvTrapN2	1.3.6.1.4.1.230.5.64.6	INTEGER	read-only	N2: numeric trap value
NTF nvTrapNoIdlePorts	1.3.6.1.4.1.230.5.2.1.0.4355			Probable Cause All available ports are in use Probable Effect No additional users will be able to call in. Recommended Action Add more ports to the particular site.
NTF nvTrapPppIpcpOnLcpUp	1.3.6.1.4.1.230.5.2.1.0.14850			Probable Cause The IP Control Protocol (IPCP) has gone up. Probable Effect The Network Layer Protocol is selected and datagrams can be sent. Recommended Action The PPP link is now available for datagram traffic.
NTF nvTrapPppLcpDown	1.3.6.1.4.1.230.5.2.1.0.14849			Probable Cause The Link Control Protocol (LCP) has gone down. Probable Effect The link is not configured and is not available for higher-level protocols such as IPCP (Internet Protocol Control Protocol). Recommended Action Refer PPP statfile pppstat.
NTF nvTrapPppLcpNetworkdown	1.3.6.1.4.1.230.5.2.1.0.15501			Probable Cause The LCP protocol is down on the network phase on the PPP link Probable Effect Network layer protocols such as IPCP can not exchange packets on the link Recommended Action
NTF nvTrapPppLcpNetworkPhase	1.3.6.1.4.1.230.5.2.1.0.15500			Probable Cause The LCP protocol has entered the network phase on the PPP link Probable Effect Network layer protocols such as IPCP can now exchange packets on the link Recommended Action None
NTF nvTrapPppLcpUp	1.3.6.1.4.1.230.5.2.1.0.14848			Probable Cause The Link Control Protocol (LCP) has gone up. Probable Effect The link is configured, tested and available for higher-level protocols such as IPCP (Internet Protocol Control Protocol). Recommended Action The PPP link is now available for higher-level protocol such as IPCP.
NTF nvTrapPppMpLinkAdded	1.3.6.1.4.1.230.5.2.1.0.15504			Probable Cause A PPP link has been added to a multilink bundle Probable Effect Greater bandwidth is available on the bundle Recommended Action None required. Informational only
NTF nvTrapPppMpLinkDropped	1.3.6.1.4.1.230.5.2.1.0.15505			Probable Cause A PPP link has been dropped from a multilink bundle Probable Effect The bandwidth for the bundle has been reduced. If this was the last link in the bundle the bundle will be closed Recommended Action None required, informational only
NTF nvTrapPriDataLayerDn	1.3.6.1.4.1.230.5.2.1.0.15137			Probable Cause ISDN Data Layer Down PRI is Not functional on the DLI Probable Effect Data Channel not responding bchannel calls will fail Recommended Action Test the DLI and check associated Config in CDLI and PRICONF
NTF nvTrapPriDataLayerUp	1.3.6.1.4.1.230.5.2.1.0.15136			Probable Cause ISDN Data Layer Up PRI is functional on the DLI Probable Effect Data Channel responding. Recommended Action Unit is ready to receive ISDN calls
NTF nvTrapQDLIFailed	1.3.6.1.4.1.230.5.2.1.0.17920			Probable Cause QDLI card has failed Probable Effect QDLI card has failed Recommended Action None required, informational only
NTF nvTrapRateDecreasedBelowL1	1.3.6.1.4.1.230.5.2.1.0.5642			Nevada statistics rate decrease to below level 1
NTF nvTrapRateDecreasedBelowL2	1.3.6.1.4.1.230.5.2.1.0.5643			Nevada statistics rate decrease to below level 2
NTF nvTrapRateIncreasedToL1	1.3.6.1.4.1.230.5.2.1.0.5640			Nevada statistics rate increased to level 1
NTF nvTrapRateIncreasedToL2	1.3.6.1.4.1.230.5.2.1.0.5641			Nevada statistics rate increased to level 2
NTF nvTrapReachedStatus	1.3.6.1.4.1.230.5.2.1.0.5644			Nevada status value reached
NTF nvTrapRemovedCard	1.3.6.1.4.1.230.5.2.1.0.17940			Probable Cause a card has been deleted in the indicated slot Probable Effect a card has been deleted -- hotswap Recommended Action None required, informational only
STR nvTrapS0	1.3.6.1.4.1.230.5.64.1	DisplayString	read-only	S0: 0-80 character trap string
STR nvTrapS1	1.3.6.1.4.1.230.5.64.2	DisplayString	read-only	S1: 0-80 character trap string
STR nvTrapS2	1.3.6.1.4.1.230.5.64.3	DisplayString	read-only	S2: 0-80 character trap string
nvTslotconf	1.3.6.1.4.1.230.5.17.6
INT nvTslotconfEnable	1.3.6.1.4.1.230.5.17.6.3.1.8	INTEGER	read-write	Is this TSLOT enabled.
nvTslotconfEntry	1.3.6.1.4.1.230.5.17.6.3.1		not-accessible	tslotconf record, indexed by record number
INT nvTslotconfIndex	1.3.6.1.4.1.230.5.17.6.3.1.1	INTEGER	read-only	Index of tslotconf record
INT nvTslotconfMaxRec	1.3.6.1.4.1.230.5.17.6.1	INTEGER	read-only	total number of records allowed in database file.
INT nvTslotconfMaxrxbuf	1.3.6.1.4.1.230.5.17.6.3.1.7	INTEGER	read-write	Maximum receive buffer space.
STR nvTslotconfName	1.3.6.1.4.1.230.5.17.6.3.1.2	DisplayString	read-only	Name of TSLOT instance.
INT nvTslotconfNumRec	1.3.6.1.4.1.230.5.17.6.2	INTEGER	read-only	number of records in use.
INT nvTslotconfOrigans	1.3.6.1.4.1.230.5.17.6.3.1.3	INTEGER	read-write	Originate or answer.
STR nvTslotconfPeeripadr	1.3.6.1.4.1.230.5.17.6.3.1.12	DisplayString	read-write	IP address if destination machine. Only used if origans = originate.
INT nvTslotconfPeertsid	1.3.6.1.4.1.230.5.17.6.3.1.11	INTEGER	read-write	TSLOT ID on destination side. Only used if origans = originate.
STR nvTslotconfReserve1	1.3.6.1.4.1.230.5.17.6.3.1.5	DisplayString	read-only	OBSOLETE - removed field.
STR nvTslotconfReserve2	1.3.6.1.4.1.230.5.17.6.3.1.6	DisplayString	read-write	OBSOLETE - removed field.
INT nvTslotconfStatus	1.3.6.1.4.1.230.5.17.6.3.1.9	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvTslotconfTable	1.3.6.1.4.1.230.5.17.6.3		not-accessible	tslotconf file.
STR nvTslotconfTcpprof	1.3.6.1.4.1.230.5.17.6.3.1.4	DisplayString	read-write	TCP profile name.
INT nvTslotconfVersion	1.3.6.1.4.1.230.5.17.6.3.1.10	INTEGER	read-write	TSLOT version number to behave as.
nvTslotstat	1.3.6.1.4.1.230.5.17.7
INT nvTslotstatCurdrprx	1.3.6.1.4.1.230.5.17.7.3.1.15	INTEGER	read-only	Number of dropped frames due to ins buffer space.
INT nvTslotstatCurrxfrm	1.3.6.1.4.1.230.5.17.7.3.1.14	INTEGER	read-only	Total number of received frames on current TCP connection.
INT nvTslotstatCurtxfrm	1.3.6.1.4.1.230.5.17.7.3.1.13	INTEGER	read-only	Total number of transmitted frames on current TCP connection.
STR nvTslotstatDtreset	1.3.6.1.4.1.230.5.17.7.3.1.16	DisplayString	read-only	date & time statistics last reset
nvTslotstatEntry	1.3.6.1.4.1.230.5.17.7.3.1		not-accessible	tslotstat record, indexed by record number
INT nvTslotstatIndex	1.3.6.1.4.1.230.5.17.7.3.1.1	INTEGER	read-only	Index of tslotconf record
INT nvTslotstatMaxRec	1.3.6.1.4.1.230.5.17.7.1	INTEGER	read-only	total number of records allowed in database file.
STR nvTslotstatName	1.3.6.1.4.1.230.5.17.7.3.1.2	DisplayString	read-only	Name of TSLOT instance.
INT nvTslotstatNumcon	1.3.6.1.4.1.230.5.17.7.3.1.9	INTEGER	read-only	Number of TCP connections.
INT nvTslotstatNumfailcn	1.3.6.1.4.1.230.5.17.7.3.1.10	INTEGER	read-only	Number of failed attempts at TCP connection.
INT nvTslotstatNumRec	1.3.6.1.4.1.230.5.17.7.2	INTEGER	read-only	number of records in use.
INT nvTslotstatOpstate	1.3.6.1.4.1.230.5.17.7.3.1.5	INTEGER	read-only	TSLOT instance operational state.
STR nvTslotstatRemipaddr	1.3.6.1.4.1.230.5.17.7.3.1.6	DisplayString	read-only	Remote machine IP address. This field is a 15 byte character string in IP dotted address format.
INT nvTslotstatRemtsid	1.3.6.1.4.1.230.5.17.7.3.1.7	INTEGER	read-only	TSLOT ID on remote machine.
INT nvTslotstatService	1.3.6.1.4.1.230.5.17.7.3.1.3	INTEGER	read-only	Connected component id.
STR nvTslotstatServiceid	1.3.6.1.4.1.230.5.17.7.3.1.4	DisplayString	read-only	Service instance name.
nvTslotstatTable	1.3.6.1.4.1.230.5.17.7.3		not-accessible	tslotstat file.
INT nvTslotstatTcpcn	1.3.6.1.4.1.230.5.17.7.3.1.8	INTEGER	read-only	TCPCNSTAT file record number.
INT nvTslotstatTotrxfrm	1.3.6.1.4.1.230.5.17.7.3.1.11	INTEGER	read-only	Total number of received frames.
INT nvTslotstatTottxfrm	1.3.6.1.4.1.230.5.17.7.3.1.12	INTEGER	read-only	Total number of transmitted frames.
nvUgconf	1.3.6.1.4.1.230.5.1.20
nvUgconfEntry	1.3.6.1.4.1.230.5.1.20.3.1		not-accessible	Device usage group configuration record.
INT nvUgconfIndex	1.3.6.1.4.1.230.5.1.20.3.1.1	INTEGER	read-only	Usage group entry index number.
INT nvUgconfMaxbw	1.3.6.1.4.1.230.5.1.20.3.1.17	INTEGER	read-write	Maximum bandwidth allocated to this entry.
INT nvUgconfMaxRec	1.3.6.1.4.1.230.5.1.20.1	INTEGER	read-only	total number of records allowed in database file.
STR nvUgconfName	1.3.6.1.4.1.230.5.1.20.3.1.5	DisplayString	read-write	Usage group entry name.
INT nvUgconfNumRec	1.3.6.1.4.1.230.5.1.20.2	INTEGER	read-only	number of records in use.
INT nvUgconfNumrsrvd	1.3.6.1.4.1.230.5.1.20.3.1.11	INTEGER	read-write	Number of devices reserved for this entry.
STR nvUgconfPool	1.3.6.1.4.1.230.5.1.20.3.1.8	DisplayString	read-write	Usage group entry resource pool name.
INT nvUgconfStatus	1.3.6.1.4.1.230.5.1.20.3.1.20	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvUgconfTable	1.3.6.1.4.1.230.5.1.20.3		not-accessible	Device usage group configuration table.
INT nvUgconfThreshld	1.3.6.1.4.1.230.5.1.20.3.1.14	INTEGER	read-write	Allocation of disallowance thrreshold for this entry.
nvUgstat	1.3.6.1.4.1.230.5.1.21
CTR nvUgstatBwrejs	1.3.6.1.4.1.230.5.1.21.3.1.6	Counter	read-only	Rejections to this group due to bandwidth restrain.
INT nvUgstatBwused	1.3.6.1.4.1.230.5.1.21.3.1.5	INTEGER	read-only	Amount of bandwidth allocated to this group.
STR nvUgstatDtreset	1.3.6.1.4.1.230.5.1.21.3.1.9	DisplayString	read-only	date & time statistics last reset
nvUgstatEntry	1.3.6.1.4.1.230.5.1.21.3.1		not-accessible	Device usage group statistics record.
INT nvUgstatIndex	1.3.6.1.4.1.230.5.1.21.3.1.1	INTEGER	read-only	Usage group statistics entry index number.
INT nvUgstatMaxRec	1.3.6.1.4.1.230.5.1.21.1	INTEGER	read-only	total number of records allowed in database file.
STR nvUgstatName	1.3.6.1.4.1.230.5.1.21.3.1.2	DisplayString	read-only	Usage group statistics entry name.
INT nvUgstatNumRec	1.3.6.1.4.1.230.5.1.21.2	INTEGER	read-only	number of records in use.
INT nvUgstatNumused	1.3.6.1.4.1.230.5.1.21.3.1.4	INTEGER	read-only	Number of devices allocated to this group.
STR nvUgstatPool	1.3.6.1.4.1.230.5.1.21.3.1.3	DisplayString	read-only	Usage group statistics entry resource pool name.
nvUgstatTable	1.3.6.1.4.1.230.5.1.21.3		not-accessible	Device usage group statistics table.
CTR nvUgstatThresrejs	1.3.6.1.4.1.230.5.1.21.3.1.8	Counter	read-only	Rejections to this group due to threshold restriction.
CTR nvUgstatUnavrejs	1.3.6.1.4.1.230.5.1.21.3.1.7	Counter	read-only	Rejections to this group due to device unavailability.
INT nvWriteConfig	1.3.6.1.4.1.230.5.65.2	INTEGER	read-write	Write Configuration -save-
INT nvWriteRoot	1.3.6.1.4.1.230.5.65.4	INTEGER	read-write	Write Mediastat file (root)
nvX25call	1.3.6.1.4.1.230.5.10.2
INT nvX25callChanstate	1.3.6.1.4.1.230.5.10.2.3.1.3	INTEGER	read-only	logical channel state Initial status is p1 (0+1).
INT nvX25callChantype	1.3.6.1.4.1.230.5.10.2.3.1.4	INTEGER	read-only	logical channel type Initial status is 3+1.
INT nvX25callCode	1.3.6.1.4.1.230.5.10.2.3.1.5	INTEGER	read-only	last clear or reset code Initial status is 1+1.
INT nvX25callDiag	1.3.6.1.4.1.230.5.10.2.3.1.6	INTEGER	read-only	last diagnostic code Initial status is 0.
STR nvX25callDtreset	1.3.6.1.4.1.230.5.10.2.3.1.31	DisplayString	read-only	date & time statistics last reset
nvX25callEntry	1.3.6.1.4.1.230.5.10.2.3.1		not-accessible	x25call record.
INT nvX25callExpack	1.3.6.1.4.1.230.5.10.2.3.1.7	INTEGER	read-only	number of ACKs expected This field indicates the number of message acknowlegements that are expected from the Network User and is used for flow control within the node. Initial status is 0.
INT nvX25callIndex	1.3.6.1.4.1.230.5.10.2.3.1.1	INTEGER	read-only	Index of x25call record
INT nvX25callLcn	1.3.6.1.4.1.230.5.10.2.3.1.8	INTEGER	read-only	logical channel number assigned to this call
INT nvX25callMaxRec	1.3.6.1.4.1.230.5.10.2.1	INTEGER	read-only	total number of records allowed in database file.
STR nvX25callNetname	1.3.6.1.4.1.230.5.10.2.3.1.2	DisplayString	read-only	network interface name (as defined in the X25conf record)
INT nvX25callNr	1.3.6.1.4.1.230.5.10.2.3.1.12	INTEGER	read-only	N(R) state variable This field indicates the sequence number of the next packet expected to be received on this logical channel. Initial status is 0.
INT nvX25callNrunak	1.3.6.1.4.1.230.5.10.2.3.1.13	INTEGER	read-only	next N(R) to acknowlege This field indicates the sequence number of the packet that will next be acknowledged as received on this channel. By delaying acknowledgements of received packets,flow control of the sender is achieved. Initial status is 0.
CTR nvX25callNrxints	1.3.6.1.4.1.230.5.10.2.3.1.20	Counter	read-only	number of INTERRUPTs received Statistic is zeroed at startup time.
CTR nvX25callNrxpaks	1.3.6.1.4.1.230.5.10.2.3.1.21	Counter	read-only	number of packets received Statistic is zeroed at startup time.
CTR nvX25callNrxres	1.3.6.1.4.1.230.5.10.2.3.1.22	Counter	read-only	number of RESET REQUESTs received Statistic is zeroed at startup time.
CTR nvX25callNrxrnrs	1.3.6.1.4.1.230.5.10.2.3.1.23	Counter	read-only	number of RNRs received Statistic is zeroed at startup time.
CTR nvX25callNrxrrs	1.3.6.1.4.1.230.5.10.2.3.1.24	Counter	read-only	number of RRs received Statistic is zeroed at startup time.
CTR nvX25callNrxsegs	1.3.6.1.4.1.230.5.10.2.3.1.25	Counter	read-only	number of segments received Statistic is zeroed at startup time.
INT nvX25callNs	1.3.6.1.4.1.230.5.10.2.3.1.14	INTEGER	read-only	N(S) state variable This field indicates the sequence number of the next data packet to be sent on this logical channel. Initial status is 0.
INT nvX25callNsunak	1.3.6.1.4.1.230.5.10.2.3.1.15	INTEGER	read-only	N(S) to be acknowledged This field indicates the sequence number of the data packet that is to be acknowledged next by the receiver. Initial status is 0.
CTR nvX25callNtxints	1.3.6.1.4.1.230.5.10.2.3.1.26	Counter	read-only	number of INTERRUPTs sent Statistic is zeroed at startup time.
CTR nvX25callNtxpaks	1.3.6.1.4.1.230.5.10.2.3.1.27	Counter	read-only	number of packets sent Statistic is zeroed at startup time.
CTR nvX25callNtxres	1.3.6.1.4.1.230.5.10.2.3.1.29	Counter	read-only	number of RESET REQUESTs sent Statistic is zeroed at startup time.
CTR nvX25callNtxrrs	1.3.6.1.4.1.230.5.10.2.3.1.30	Counter	read-only	number of RRs sent .note RNRs are not transmitted by the X.25 interface component. .end note Statistic is zeroed at startup time.
CTR nvX25callNtxsegs	1.3.6.1.4.1.230.5.10.2.3.1.28	Counter	read-only	number of segments sent Statistic is zeroed at startup time.
INT nvX25callNumRec	1.3.6.1.4.1.230.5.10.2.2	INTEGER	read-only	number of records in use.
INT nvX25callNunakpac	1.3.6.1.4.1.230.5.10.2.3.1.16	INTEGER	read-only	number of unacknowledged data packets transmitted This field indicates the number of data packets that have been sent but that are not yet acknowledged by the receiver. Initial status is 0.
INT nvX25callRxpsze	1.3.6.1.4.1.230.5.10.2.3.1.9	INTEGER	read-only	receive packet size This field indicates the largest packet that will be received across the interface. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 7+1.
INT nvX25callRxtput	1.3.6.1.4.1.230.5.10.2.3.1.11	INTEGER	read-only	receive throughput class This field indicates the receive throughtput class that is being used. If throughput-class negotiation is in effect,this is the value that was agreed. Initial status is 7+1.
INT nvX25callRxwsze	1.3.6.1.4.1.230.5.10.2.3.1.10	INTEGER	read-only	receive window This field indicates the packet-level receive window size being used. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 2.
nvX25callTable	1.3.6.1.4.1.230.5.10.2.3		not-accessible	x25call file.
INT nvX25callTxpsze	1.3.6.1.4.1.230.5.10.2.3.1.17	INTEGER	read-only	transmit packet size This field indicates the largest packet that will be transmitted across the interface. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 7+1.
INT nvX25callTxtput	1.3.6.1.4.1.230.5.10.2.3.1.19	INTEGER	read-only	transmit throughput class This field indicates the transmit throughtput class that is being used. If throughput-class negotiation is in effect,this is the value that was agreed. Initial status is 7+1.
INT nvX25callTxwsze	1.3.6.1.4.1.230.5.10.2.3.1.18	INTEGER	read-only	transmit window This field indicates the packet-level transmit window size being used. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 2.
nvX25conf	1.3.6.1.4.1.230.5.10.3
INT nvX25confAckthresh	1.3.6.1.4.1.230.5.10.3.3.1.15	INTEGER	read-write	Acknowledgement Threshold (ackthresh) acknowledgement threshold is used to acknowledge received data when certain number of data packets received,even if t2 timer has not expired. It is used only if t2 procedure is active,ie acktime is greater than zero. Default value is 0.
INT nvX25confAcktimer	1.3.6.1.4.1.230.5.10.3.3.1.14	INTEGER	read-write	Packet Acknowledgement Timer (acktimer) defines if t2 procedure is going to be used or not,and if it is going to be used what t2 time period will be in one tenths of a second. When t2 is zero,procedure to delay acknowledgement will not be performed. Default value is 0.
INT nvX25confApp	1.3.6.1.4.1.230.5.10.3.3.1.3	INTEGER	read-write	Logical Interface Appearance (app) This field defines whether the component implements an X.25 interface,or an internal network trunk interface. In addition,it specifies the appearance of the interface. Default value is 1+1.
INT nvX25confAutostart	1.3.6.1.4.1.230.5.10.3.3.1.4	INTEGER	read-write	Auto X.25 Connection Startup (autostart) Default value is enable (1+1).
INT nvX25confCugformat	1.3.6.1.4.1.230.5.10.3.3.1.17	INTEGER	read-write	Closed User Group Format (cugformat) This field indicates the format of closed user groups to which this interface subscribes. If the type is basic,the two digit format of the CUG facility request is used. If the type is extend the four digit format is used. Default value is basic (0+1).
INT nvX25confDbmod	1.3.6.1.4.1.230.5.10.3.3.1.18	INTEGER	read-write	D-Bit Modification (dbmod) This field enables d bit modification,where all data packets received from the link are assumed to have their delivery confirmation bit set,and all data packets transmitted have it reset. This is only present to cater to older network implementations that do not support delivery confirmation. Default value is 0.
INT nvX25confDefpsze	1.3.6.1.4.1.230.5.10.3.3.1.19	INTEGER	read-write	Default Packet Size (defpsze) This value sets the maximum packet size that can be transferred across the interface if packet size negotiation is disabled (flowneg = no/wsz) or is not requested. If flow control parameter negotiation is enabled (flowneg = yes/psz), this value is used as a starting point and may be negotiated, with the network, up to the value of maxpsze or down to the minimum value of 16. Values for packet size requested by components (eg ITI) are preferentially used if flow control negotiation is enabled (flowneg = yes/psz) AND if the requested values are between maxpsze and 16; in all other cases defpsze is used. Default value is 7+1.
INT nvX25confDeftput	1.3.6.1.4.1.230.5.10.3.3.1.21	INTEGER	read-write	Default Throughput Class (deftput) This field sets the initial value to be used for the throughput class for the virtual call if throughput-class negotiation is disabled (thruneg = no) or is not requested. If throughput-class negotiation is enabled (thruneg = yes), this value is used as a starting point and may be negotiated, with the network,downwards. Values for throughputclass negotiation requested by components (eg ITI) are preferentially used if throughput-class negotiation is enabled (thruneg = yes) AND if the requested values are less than deftput; in all other cases deftput is used. .note;Although CCITT defines throughput classes in terms of a guaranteed data-rate,throughput classes are only implemented to the extent of arranging that packets of a higher throughput-class are serviced before those of a lower class. .end note Default value is 10+1.
INT nvX25confDefwsze	1.3.6.1.4.1.230.5.10.3.3.1.20	INTEGER	read-write	Default Window Size (defwsze) This field sets the default value for the packet-level window size to be used when transferring packets if flow-control negotiation is disabled (flowneg = no/psz) or is not requested. If flow control parameter negotiation is enabled (flowneg=yes/wsz) then this value is used as a starting point and may be negotiated up to the maximum value set by maxwsze or down to a minimum value of 1. If this field is set to a value greater than 7,the interface must be configured for extended packet numbering (xtend = yes). Values for window size requested by components (eg ITI) are preferentially used if flow control negotiation is enabled (flowneg = yes/wsz) AND if the requested values are between maxwsze and 1; in all other cases defwsze is used. Default value is 2.
INT nvX25confDiagsupr	1.3.6.1.4.1.230.5.10.3.3.1.22	INTEGER	read-write	Diagnostic Packet Suppression (diagsupr) This field suppresses or enables the emission of DIAG diagnostic packets on some network protocol violations. Default value is no (0+1).
INT nvX25confDirection	1.3.6.1.4.1.230.5.10.3.3.1.23	INTEGER	read-write	Call Direction Allowed (direction) This field indicates whether incoming and outgoing calls may be made over this interface. Default value is 3+1.
INT nvX25confDlnumber	1.3.6.1.4.1.230.5.10.3.3.1.5	INTEGER	read-write	Data Link Record (dlnumber) This field tells which of the DLCONF records in the SL component should be used by this net. Default value is 0.
nvX25confEntry	1.3.6.1.4.1.230.5.10.3.3.1		not-accessible	x25conf record.
INT nvX25confFlowneg	1.3.6.1.4.1.230.5.10.3.3.1.24	INTEGER	read-write	Flow Control Negotiation (flowneg) This field enables or disables negotiation of the flow control parameters,window size and packet size. Default value is no (0+1).
INT nvX25confFstacc	1.3.6.1.4.1.230.5.10.3.3.1.25	INTEGER	read-write	Fast Select Acceptance (fstacc) This field defines whether fast-select call requests are accepted. Default value is no (0+1).
INT nvX25confIndex	1.3.6.1.4.1.230.5.10.3.3.1.1	INTEGER	read-only	Index of x25conf record
INT nvX25confIsdnaddr	1.3.6.1.4.1.230.5.10.3.3.1.43	INTEGER	read-write	Get calling address from ISDN? Default value is no (0+1).
INT nvX25confLic	1.3.6.1.4.1.230.5.10.3.3.1.6	INTEGER	read-write	Lowest Incoming SVC (lic) This field defines the lowest logical channel number (LCN) that is reserved for incoming calls. The range of logical channels from LIC to LIC+NIC-1 is reserved for incoming calls only. Default value is 1.
INT nvX25confLoc	1.3.6.1.4.1.230.5.10.3.3.1.7	INTEGER	read-write	Lowest Outgoing SVC (loc) This field defines the lowest logical channel number (LCN) that is reserved for outgoing calls. The range of logical channels from LOC to LOC+NOC-1 is reserved for outgoing calls. Default value is 1.
INT nvX25confLpc	1.3.6.1.4.1.230.5.10.3.3.1.8	INTEGER	read-write	Lowest PVC (lpc) This field describes the lowest logical channel number (LCN) in the range reserved for permanent virtual circuits (PVCs). Each of the channels should also be described in the X25PVC file,although if they are not they will be treated as PVC 'B' ends. Default value is 1.
INT nvX25confLtc	1.3.6.1.4.1.230.5.10.3.3.1.9	INTEGER	read-write	Lowest Two-Way SVC (ltc) This field defines the lowest logical channel number (LCN) that may be used for both incoming calls and outgoing calls. The range of logical channels from LTC to LTC+NTC-1 is available for incoming and outgoing calls. Default value is 1.
INT nvX25confMaxpsze	1.3.6.1.4.1.230.5.10.3.3.1.27	INTEGER	read-write	Maximum Packet Size (maxpsze) This value is the maximum acceptable value for the largest packet that can be sent across the interface. It is used as an upper-bound in packet size negotiation. Default value is 7+1.
INT nvX25confMaxRec	1.3.6.1.4.1.230.5.10.3.1	INTEGER	read-only	total number of records allowed in database file.
INT nvX25confMaxwsze	1.3.6.1.4.1.230.5.10.3.3.1.28	INTEGER	read-write	Maximum Window Size (maxwsze) This field sets the maximum acceptable value for the packet-level window size to be used when transferring packets. It is used as a upper-bound in window size negotiation. If this field is set to a value greater than 7,the interface must be configured for extended packet numbering (xtend = yes). Default value is 2.
STR nvX25confNetaddr	1.3.6.1.4.1.230.5.10.3.3.1.29	DisplayString	read-write	Calling Network Address (netaddr) If this field is not empty,the contents will be supplied as the calling network address in all call request packets transmitted,overriding anything supplied by the network user.
STR nvX25confNetname	1.3.6.1.4.1.230.5.10.3.3.1.2	DisplayString	read-only	Network Interface Name (netname) This field names an instance of the X.25 network interface. The name is used to identify the status records belonging to,and commands destined for,a particular instance of an X.25 network interface. Parameter is set during factory configuration.
INT nvX25confNettype	1.3.6.1.4.1.230.5.10.3.3.1.30	INTEGER	read-write	X.25 Network Type (nettype) This field indicates the local variety of X.25 network and is primarily used to show how to interpret non-X.25 facilities of the local network.If nettype = unknown,non-X.25 facilities are passed transparently through a switch and ignored by a PAD. Default value is ccitt (0+1).
INT nvX25confNetvrsion	1.3.6.1.4.1.230.5.10.3.3.1.31	INTEGER	read-write	Network Version (netvrsion) This field indicates which version of the X.25 recommendation to which the network interface should adhere. Default value is 80.
INT nvX25confNic	1.3.6.1.4.1.230.5.10.3.3.1.10	INTEGER	read-write	Number of Incoming SVCs (nic) Default value is 0.
INT nvX25confNoc	1.3.6.1.4.1.230.5.10.3.3.1.11	INTEGER	read-write	Number of Outgoing SVCs (noc) Default value is 0.
INT nvX25confNpc	1.3.6.1.4.1.230.5.10.3.3.1.12	INTEGER	read-write	Number of PVCs (npc) Default value is 0.
INT nvX25confNtc	1.3.6.1.4.1.230.5.10.3.3.1.13	INTEGER	read-write	Number of Two-Way SVCs (ntc) .nfl index .nfl capitalize .note The four ranges (LPC to LPC+NPC-1; LIC to LIC+NIC-1; LTC to LTC+NTC-1 ;and LOC to LOC+NOC-1) must not overlap. Futhermore,to avoid channel assignments collisions between DTEs and DCEs,it is recommended that the ranges be assigned thus: .br;For DTEs: LIC to LIC+NIC-1 LTC to LTC+NTC-1 > LOC to LOC+NOC-1 .end note .fl index .fl capitalize Default value is 28.
INT nvX25confNuireq	1.3.6.1.4.1.230.5.10.3.3.1.16	INTEGER	read-write	NUI required
INT nvX25confNuirtg	1.3.6.1.4.1.230.5.10.3.3.1.42	INTEGER	read-write	If this field is set to yes,route is based on NUI using x25nuimap entries.
INT nvX25confNumRec	1.3.6.1.4.1.230.5.10.3.2	INTEGER	read-only	number of records in use.
INT nvX25confPktbuf	1.3.6.1.4.1.230.5.10.3.3.1.32	INTEGER	read-write	Packet Buffer for Unbalance Window For unbalanced window enhancement,FRR will be generated when the number of unacknowledged transmitted packets reaches the value of the PKTBUF field. Default value is 0.
INT nvX25confRevacc	1.3.6.1.4.1.230.5.10.3.3.1.34	INTEGER	read-write	Reverse Charging Acceptance (revacc) In an X.25 DTE configuration,this field defines whether an incoming call indicating reverse charging is passed up to the Network Bus or rejected immediately. In an X.25 DCE configuration,it indicates whether a reverse charging call to the DTE should be passed through or cleared. In X.75 configurations this field has no significance. Default value is yes (1+1).
INT nvX25confStndbytim	1.3.6.1.4.1.230.5.10.3.3.1.33	INTEGER	read-write	Standby Timer (stndbytim) How many seconds the box will wait before dropping dialout connection when there is no vc connected. Default value is 30.
nvX25confTable	1.3.6.1.4.1.230.5.10.3.3		not-accessible	x25conf file.
INT nvX25confThruneg	1.3.6.1.4.1.230.5.10.3.3.1.35	INTEGER	read-write	Throughput Class Negotiation (thruneg) This field enables or disables negotiation of throughput classes. Default value is (0+1).
INT nvX25confTx0	1.3.6.1.4.1.230.5.10.3.3.1.36	INTEGER	read-write	Restart Request Timer (tx0) This field defines the value,in seconds,for restart indication timer#(T10 - DCE appearance) restart request timer####(T20 - DTE appearance) Recommended values are: T10 - 60s T20 - 180s Default value is 180.
INT nvX25confTx1	1.3.6.1.4.1.230.5.10.3.3.1.37	INTEGER	read-write	Call Request Timer (tx1) This field defines the value,in seconds,for - incoming call timer######(T11 - DCE appearance) - call request timer#######(T21 - DTE appearance) Recommended values are: T11 - 180s T21 - 200s Default value is 200.
INT nvX25confTx2	1.3.6.1.4.1.230.5.10.3.3.1.38	INTEGER	read-write	Reset Request Timer (tx2) This field defines the value,in seconds,for - reset indication timer###(T12 - DCE appearance) - reset request timer######(T22 - DTE appearance) Recommended values are: T12 - 60s T22 - 180s Default value is 180.
INT nvX25confTx3	1.3.6.1.4.1.230.5.10.3.3.1.39	INTEGER	read-write	Clear Request Timer (tx3) This field defines the value,in seconds,for - clear indication timer###(T13 - DCE appearance) - clear request timer######(T23 - DTE appearance) Recommended values are: T13 - 60s T23 - 180s Default value is 180.
INT nvX25confUpdncmd	1.3.6.1.4.1.230.5.10.3.3.1.26	INTEGER	read-write	Link Up/Down Command This field is the string id of a script like command that may bring other links up or down when this link goes up or down format: netup-cmds>netdown-cmds netup-cmds: >netx.up/down... netdown-cmds: netx.up/down... example: >netw.up>netx.down>>nety.up>netz.down Default value is 0.
INT nvX25confXtend	1.3.6.1.4.1.230.5.10.3.3.1.40	INTEGER	read-write	Extended Packet Numbering (xtend) This field allows the extended packet sequencing format (modulo 128) to be used. If this option is not selected,packet sequencing is modulo 8. Default value is no (0+1).
nvX25nuimap	1.3.6.1.4.1.230.5.10.4
STR nvX25nuimapCalled	1.3.6.1.4.1.230.5.10.4.3.1.3	DisplayString	read-write	Called Network Address
nvX25nuimapEntry	1.3.6.1.4.1.230.5.10.4.3.1		not-accessible	x25nuimap record.
INT nvX25nuimapIndex	1.3.6.1.4.1.230.5.10.4.3.1.1	INTEGER	read-only	Index of x25nuimap record
INT nvX25nuimapMaxRec	1.3.6.1.4.1.230.5.10.4.1	INTEGER	read-only	total number of records allowed in database file.
STR nvX25nuimapNui	1.3.6.1.4.1.230.5.10.4.3.1.2	DisplayString	read-write	NUI value to match
INT nvX25nuimapNumRec	1.3.6.1.4.1.230.5.10.4.2	INTEGER	read-only	number of records in use.
INT nvX25nuimapStatus	1.3.6.1.4.1.230.5.10.4.3.1.4	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvX25nuimapTable	1.3.6.1.4.1.230.5.10.4.3		not-accessible	x25nuimap file.
nvX25stat	1.3.6.1.4.1.230.5.10.1
INT nvX25statCallcur	1.3.6.1.4.1.230.5.10.1.3.1.6	INTEGER	read-only	Number of X25 calls currently active.
INT nvX25statCode	1.3.6.1.4.1.230.5.10.1.3.1.3	INTEGER	read-only	last clear or reset code. Initial status is 1+1.
INT nvX25statDiag	1.3.6.1.4.1.230.5.10.1.3.1.4	INTEGER	read-only	last diagnostic code. Initial status is 0.
STR nvX25statDtreset	1.3.6.1.4.1.230.5.10.1.3.1.32	DisplayString	read-only	date & time statistics last reset
nvX25statEntry	1.3.6.1.4.1.230.5.10.1.3.1		not-accessible	x25stat record.
INT nvX25statIfstate	1.3.6.1.4.1.230.5.10.1.3.1.5	INTEGER	read-only	network state. Current state of network interface. Initial status is 0+1.
INT nvX25statIndex	1.3.6.1.4.1.230.5.10.1.3.1.1	INTEGER	read-only	Index of x25stat record
INT nvX25statLinkup	1.3.6.1.4.1.230.5.10.1.3.1.33	INTEGER	read-only	Link (level2) uptime in seconds.
INT nvX25statMaxRec	1.3.6.1.4.1.230.5.10.1.1	INTEGER	read-only	total number of records allowed in database file.
INT nvX25statMaxvc	1.3.6.1.4.1.230.5.10.1.3.1.31	INTEGER	read-only	maximum connections. Statistic is zeroed at startup time.
STR nvX25statNetname	1.3.6.1.4.1.230.5.10.1.3.1.2	DisplayString	read-only	x25stat: network interface name.
CTR nvX25statNrxcallcs	1.3.6.1.4.1.230.5.10.1.3.1.12	Counter	read-only	number of call confs received. Statistic is zeroed at startup time.
CTR nvX25statNrxcalls	1.3.6.1.4.1.230.5.10.1.3.1.10	Counter	read-only	number of call requests received. Statistic is zeroed at startup time.
CTR nvX25statNrxchars	1.3.6.1.4.1.230.5.10.1.3.1.30	Counter	read-only	number of data chars received. Statistic is zeroed at startup time.
CTR nvX25statNrxclrcs	1.3.6.1.4.1.230.5.10.1.3.1.16	Counter	read-only	number of clear confs received. Statistic is zeroed at startup time.
CTR nvX25statNrxclrs	1.3.6.1.4.1.230.5.10.1.3.1.14	Counter	read-only	number of clear requests received. Statistic is zeroed at startup time.
CTR nvX25statNrxints	1.3.6.1.4.1.230.5.10.1.3.1.20	Counter	read-only	number of int requests received. Statistic is zeroed at startup time.
CTR nvX25statNrxpaks	1.3.6.1.4.1.230.5.10.1.3.1.26	Counter	read-only	number of data packets received. Statistic is zeroed at startup time.
CTR nvX25statNrxres	1.3.6.1.4.1.230.5.10.1.3.1.18	Counter	read-only	number of reset requests received. Statistic is zeroed at startup time.
CTR nvX25statNrxrnrs	1.3.6.1.4.1.230.5.10.1.3.1.24	Counter	read-only	number of receiver not readys received. Statistic is zeroed at startup time.
CTR nvX25statNrxrrs	1.3.6.1.4.1.230.5.10.1.3.1.22	Counter	read-only	number of receiver readys received. Statistic is zeroed at startup time.
CTR nvX25statNrxsegs	1.3.6.1.4.1.230.5.10.1.3.1.28	Counter	read-only	number of data segments received. Statistic is zeroed at startup time.
CTR nvX25statNtxcallcs	1.3.6.1.4.1.230.5.10.1.3.1.11	Counter	read-only	number of call confs sent. Statistic is zeroed at startup time.
CTR nvX25statNtxcalls	1.3.6.1.4.1.230.5.10.1.3.1.9	Counter	read-only	number of call requests sent. Statistic is zeroed at startup time.
CTR nvX25statNtxchars	1.3.6.1.4.1.230.5.10.1.3.1.29	Counter	read-only	number of data chars sent. Statistic is zeroed at startup time.
CTR nvX25statNtxclrcs	1.3.6.1.4.1.230.5.10.1.3.1.15	Counter	read-only	number of clear confs sent. Statistic is zeroed at startup time.
CTR nvX25statNtxclrs	1.3.6.1.4.1.230.5.10.1.3.1.13	Counter	read-only	number of clear requests sent. Statistic is zeroed at startup time.
CTR nvX25statNtxints	1.3.6.1.4.1.230.5.10.1.3.1.19	Counter	read-only	number of int requests send. Statistic is zeroed at startup time.
CTR nvX25statNtxpaks	1.3.6.1.4.1.230.5.10.1.3.1.25	Counter	read-only	number of data packets sent. Statistic is zeroed at startup time.
CTR nvX25statNtxres	1.3.6.1.4.1.230.5.10.1.3.1.17	Counter	read-only	number of reset requests send. Statistic is zeroed at startup time.
CTR nvX25statNtxrnrs	1.3.6.1.4.1.230.5.10.1.3.1.23	Counter	read-only	number of receiver not readys send. Statistic is zeroed at startup time.
CTR nvX25statNtxrrs	1.3.6.1.4.1.230.5.10.1.3.1.21	Counter	read-only	number of receiver readys send. Statistic is zeroed at startup time.
CTR nvX25statNtxsegs	1.3.6.1.4.1.230.5.10.1.3.1.27	Counter	read-only	number of data segments sent. Statistic is zeroed at startup time.
INT nvX25statNumRec	1.3.6.1.4.1.230.5.10.1.2	INTEGER	read-only	number of records in use.
INT nvX25statOpen	1.3.6.1.4.1.230.5.10.1.3.1.7	INTEGER	read-only	network open? Initial status is 0+1.
nvX25statTable	1.3.6.1.4.1.230.5.10.1.3		not-accessible	x25stat file.
INT nvX25statUp	1.3.6.1.4.1.230.5.10.1.3.1.8	INTEGER	read-only	network up? Initial status is 0+1.
nvXbillconf	1.3.6.1.4.1.230.5.10.5
INT nvXbillconfBilltime	1.3.6.1.4.1.230.5.10.5.3.1.4	INTEGER	read-write	Time xbillstat records will remain open for.
INT nvXbillconfEnable	1.3.6.1.4.1.230.5.10.5.3.1.2	INTEGER	read-write	Enable/Disable xbillstat accounting.
nvXbillconfEntry	1.3.6.1.4.1.230.5.10.5.3.1		not-accessible	xbillconf record, indexed by record number
INT nvXbillconfIndex	1.3.6.1.4.1.230.5.10.5.3.1.1	INTEGER	read-only	Index of xbillconf record.
INT nvXbillconfMaxRec	1.3.6.1.4.1.230.5.10.5.1	INTEGER	read-only	total number of records allowed in database file.
INT nvXbillconfNumRec	1.3.6.1.4.1.230.5.10.5.2	INTEGER	read-only	number of records in use.
INT nvXbillconfSegsize	1.3.6.1.4.1.230.5.10.5.3.1.3	INTEGER	read-write	Segment size.
nvXbillconfTable	1.3.6.1.4.1.230.5.10.5.3		not-accessible	xbillconf file.
nvXbillstat	1.3.6.1.4.1.230.5.10.7
CTR nvXbillstat10to15	1.3.6.1.4.1.230.5.10.7.3.1.16	Counter	read-only	Number of ISDN calls from 10 to 15 secs.
CTR nvXbillstat15to20	1.3.6.1.4.1.230.5.10.7.3.1.17	Counter	read-only	Number of ISDN calls from 15 to 20 secs.
CTR nvXbillstat5to10	1.3.6.1.4.1.230.5.10.7.3.1.15	Counter	read-only	Number of ISDN calls from 5 to 10 secs.
INT nvXbillstatClosed	1.3.6.1.4.1.230.5.10.7.3.1.19	INTEGER	read-only	Record open or closed.
STR nvXbillstatDatarate	1.3.6.1.4.1.230.5.10.7.3.1.6	DisplayString	read-only	ISDN speed
STR nvXbillstatDate	1.3.6.1.4.1.230.5.10.7.3.1.3	DisplayString	read-only	Date of Record Generation.
nvXbillstatEntry	1.3.6.1.4.1.230.5.10.7.3.1		not-accessible	xbillstat record, indexed by record number
CTR nvXbillstatGrtr20	1.3.6.1.4.1.230.5.10.7.3.1.18	Counter	read-only	Number of ISDN calls greater than 20 secs.
CTR nvXbillstatHostclr	1.3.6.1.4.1.230.5.10.7.3.1.10	Counter	read-only	Number of X.25 Calls Cleared by the Host.
INT nvXbillstatIndex	1.3.6.1.4.1.230.5.10.7.3.1.1	INTEGER	read-only	Index of xbillstat record.
CTR nvXbillstatLess5	1.3.6.1.4.1.230.5.10.7.3.1.14	Counter	read-only	Number of ISDN calls less that 5 secs.
INT nvXbillstatMaxRec	1.3.6.1.4.1.230.5.10.7.1	INTEGER	read-only	total number of records allowed in database file.
CTR nvXbillstatNetclr	1.3.6.1.4.1.230.5.10.7.3.1.11	Counter	read-only	Number of X.25 Calls Cleared by the Network.
INT nvXbillstatNodeid	1.3.6.1.4.1.230.5.10.7.3.1.2	INTEGER	read-only	Node Identifier
STR nvXbillstatNuaset	1.3.6.1.4.1.230.5.10.7.3.1.5	DisplayString	read-only	Nuaset used to generate this record.
INT nvXbillstatNumRec	1.3.6.1.4.1.230.5.10.7.2	INTEGER	read-only	number of records in use.
CTR nvXbillstatRxcallc	1.3.6.1.4.1.230.5.10.7.3.1.9	Counter	read-only	Number of X.25 Calls Accepted by the Host.
CTR nvXbillstatRxpak	1.3.6.1.4.1.230.5.10.7.3.1.13	Counter	read-only	Number of X.25 packets received.
CTR nvXbillstatRxseg	1.3.6.1.4.1.230.5.10.7.3.1.8	Counter	read-only	Number of received X.25 segments.
nvXbillstatTable	1.3.6.1.4.1.230.5.10.7.3		not-accessible	xbillstat file.
STR nvXbillstatTime	1.3.6.1.4.1.230.5.10.7.3.1.4	DisplayString	read-only	Time of Record Generation.
CTR nvXbillstatTxpak	1.3.6.1.4.1.230.5.10.7.3.1.12	Counter	read-only	Number of Transmitted X.25 packets.
CTR nvXbillstatTxseg	1.3.6.1.4.1.230.5.10.7.3.1.7	Counter	read-only	Number of transmitted X.25 segments.
nvXnuaset	1.3.6.1.4.1.230.5.10.6
nvXnuasetEntry	1.3.6.1.4.1.230.5.10.6.3.1		not-accessible	xnuaset record, indexed by record number
INT nvXnuasetIndex	1.3.6.1.4.1.230.5.10.6.3.1.1	INTEGER	read-only	Index of xnuaset record.
INT nvXnuasetMaxRec	1.3.6.1.4.1.230.5.10.6.1	INTEGER	read-only	total number of records allowed in database file.
STR nvXnuasetNua1	1.3.6.1.4.1.230.5.10.6.3.1.3	DisplayString	read-write	Nua1.
STR nvXnuasetNua2	1.3.6.1.4.1.230.5.10.6.3.1.4	DisplayString	read-write	Nua2.
STR nvXnuasetNua3	1.3.6.1.4.1.230.5.10.6.3.1.5	DisplayString	read-write	Nua3.
INT nvXnuasetNumRec	1.3.6.1.4.1.230.5.10.6.2	INTEGER	read-only	number of records in use.
STR nvXnuasetSetname	1.3.6.1.4.1.230.5.10.6.3.1.2	DisplayString	read-write	Nuaset name
INT nvXnuasetStatus	1.3.6.1.4.1.230.5.10.6.3.1.10	INTEGER	read-write	Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
nvXnuasetTable	1.3.6.1.4.1.230.5.10.6.3		not-accessible	xnuaset file.
telematics	1.3.6.1.4.1.230
tmxNevada	1.3.6.1.4.1.230.5

RFC description

MIB for Nevada software release 4.x providing management of frame relay, ISDN, PPP, and routing protocols.

Start monitoring Telematics Nevada-series network access/routing device (buffer/CPU/packet-rate resource status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Telematics-Nevada-MIB

What Is Telematics-Nevada-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description