TRANGO-P5M-MIB

All MIBs › TRANGO-P5M-MIB

Organization: Trango Corporation

Last Updated: 2004-08-27

Category: Wireless Backhaul

Description: Manages Trango P5M point-to-multipoint wireless backhaul system configuration and subscriber unit status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TRANGO-P5M-MIB?

TRANGO-P5M-MIB is a proprietary MIB from Trango Systems for its Atlas P5M point-to-multipoint fixed wireless backhaul product line, used to link a base station to multiple subscriber radio units. It exposes hardware and firmware version identifiers, the device MAC address, operating-mode configuration/state, SNMP community-string settings, and radio behavior options such as automatic rate shifting and signal scanning. It is particularly useful for monitoring the hardware and software status of each radio unit, verifying installed hardware revision (verHW) and firmware revision (verFW), and confirming whether a unit is currently operating in its configured mode (sysCurrentOpmode vs. sysDefaultOpmode). The MIB is self-contained under Trango's private enterprise tree with no apparent dependency on external standard MIBs. It is typically deployed by wireless ISPs and enterprises operating point-to-multipoint backhaul links to remote sites or towers. Engineers can download the TRANGO-P5M-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TRANGO-P5M-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Trango Systems Atlas P5M point-to-multipoint wireless backhaul radio
subscriber/base station wireless bridge unit

Monitoring Examples

sysCurrentOpmode compared against sysDefaultOpmode and sysActivateOpmode lets an admin verify a subscriber unit's master/slave role after activation, while verHW and verFW confirm hardware and firmware revisions on that unit. sysswAutoRateShiftingEnable indicates whether the link auto-adjusts modulation for changing radio conditions, and sysswAutoScanMUSignal shows whether the unit is auto-scanning for the strongest signal, both useful when diagnosing an unstable backhaul link.

What Can Be Monitored

hardware version
firmware version
device MAC address
current/default operating mode
auto rate shifting status
SNMP community string configuration

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Opaque
Unsigned32
enterprises

How to Use in IPNetwork Monitor

Example using systrafficEthInOctets OID:

Select a Trango Systems Atlas P5M point-to-multipoint wireless backhaul radio (hardware/firmware revision status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type systrafficEthInOctets into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of payload octets received on Ethernet port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
eventReportingGroupV2	1.3.6.1.4.1.5454.1.40.7.1.1			Notification group.
maintenance	1.3.6.1.4.1.5454.1.40.5
OCT maintenanceLinkControl	1.3.6.1.4.1.5454.1.40.5.1	OCTET STRING	read-write	Link Test Summary Data.
INT maintenanceSerialNumber	1.3.6.1.4.1.5454.1.40.5.7	INTEGER	read-write	Atlas Board Serial Number.
INT maintenanceServiceEnable	1.3.6.1.4.1.5454.1.40.5.3	INTEGER	read-write	Enable or disable system service.
OCT maintenanceSiteSurveySummary1	1.3.6.1.4.1.5454.1.40.5.2	OCTET STRING	read-write	Site Survey Summary Data.
OCT maintenanceSiteSurveySummary2	1.3.6.1.4.1.5454.1.40.5.4	OCTET STRING	read-write	Site Survey Summary Data.
OCT maintenanceSiteSurveySummary3	1.3.6.1.4.1.5454.1.40.5.5	OCTET STRING	read-write	Site Survey Summary Data.
OCT maintenanceSiteSurveySummary4	1.3.6.1.4.1.5454.1.40.5.6	OCTET STRING	read-write	Site Survey Summary Data.
INT maintenanceUNIIMaxPower	1.3.6.1.4.1.5454.1.40.5.8	INTEGER	read-write	UNII Maximum Power.
NTF masterEvent	1.3.6.1.4.1.5454.1.40.6.0.1			This notification signifies that the master unit generated a report.
p5m	1.3.6.1.4.1.5454.1.40
NTF remoteEvent	1.3.6.1.4.1.5454.1.40.6.0.2			This notification signifies that the remote unit generated a report.
rf	1.3.6.1.4.1.5454.1.40.2
INT rfActiveChannel	1.3.6.1.4.1.5454.1.40.2.2	INTEGER	read-write	It specifies the current active channel number.
STR rfActivePolarization	1.3.6.1.4.1.5454.1.40.2.3	DisplayString	read-write	It specifies the current polarization.
INT rfAreaCode	1.3.6.1.4.1.5454.1.40.2.9	INTEGER	read-only	area code which specify band regulatory
INT rfAssociated	1.3.6.1.4.1.5454.1.40.2.13	INTEGER	read-only	Association Status
INT rfBandEnable	1.3.6.1.4.1.5454.1.40.2.10.1.4	INTEGER	read-only	Band availability
INT rfBandRangeMax	1.3.6.1.4.1.5454.1.40.2.10.1.3	INTEGER	read-only	Max Frequency of Band
INT rfBandRangeMin	1.3.6.1.4.1.5454.1.40.2.10.1.2	INTEGER	read-only	Min Frequency of Band
rfBandTable	1.3.6.1.4.1.5454.1.40.2.10		not-accessible	4 Band Tables
rfBandTableEntry	1.3.6.1.4.1.5454.1.40.2.10.1		not-accessible	An entry of Band Table.
INT rfBandTableIndex	1.3.6.1.4.1.5454.1.40.2.10.1.1	INTEGER	not-accessible	index of Band Table
INT rfBandTxPowerMax16QAM	1.3.6.1.4.1.5454.1.40.2.10.1.9	INTEGER	read-only	Max Tx Power for 16 QAM
INT rfBandTxPowerMax64QAM	1.3.6.1.4.1.5454.1.40.2.10.1.10	INTEGER	read-only	Max Tx Power for 64 QAM
INT rfBandTxPowerMaxBPSK	1.3.6.1.4.1.5454.1.40.2.10.1.7	INTEGER	read-only	Max Tx Power for BPSK
INT rfBandTxPowerMaxCCK	1.3.6.1.4.1.5454.1.40.2.10.1.6	INTEGER	read-only	Max Tx Power for CCK
INT rfBandTxPowerMaxQPSK	1.3.6.1.4.1.5454.1.40.2.10.1.8	INTEGER	read-only	Max Tx Power for QPSK
INT rfBandTxPowerMin	1.3.6.1.4.1.5454.1.40.2.10.1.5	INTEGER	read-only	Min Tx Power
INT rfChannelFrequency	1.3.6.1.4.1.5454.1.40.2.8.1.2	INTEGER	read-write	Frequency (MHz)
rfChannelTable	1.3.6.1.4.1.5454.1.40.2.8		not-accessible	Channel Table
rfChannelTableEntry	1.3.6.1.4.1.5454.1.40.2.8.1		not-accessible	An entry of Channel Table.
INT rfChannelTableIndex	1.3.6.1.4.1.5454.1.40.2.8.1.1	INTEGER	not-accessible	index of Channel Table
INT rfNumberOfChannel	1.3.6.1.4.1.5454.1.40.2.7	INTEGER	read-only	number of Channel
OCT rfPeerDeviceID	1.3.6.1.4.1.5454.1.40.2.1	OCTET STRING	read-write	Device ID of Remote Unit
INT rfRSSI	1.3.6.1.4.1.5454.1.40.2.12	INTEGER	read-only	RSSI (in dBm).
INT rfSpeed	1.3.6.1.4.1.5454.1.40.2.4	INTEGER	read-write	It specifies the rf speed.
INT rfTxMIR	1.3.6.1.4.1.5454.1.40.2.6	INTEGER	read-write	Max Tx Information Rate in Kbps
INT rfTxPower	1.3.6.1.4.1.5454.1.40.2.5	INTEGER	read-write	It specifies tx power. And it will be limited by Min/Max by different band
ru	1.3.6.1.4.1.5454.1.40.3
INT ruReserved2	1.3.6.1.4.1.5454.1.40.3.1	INTEGER	read-write	Perform Power Leveling RU. Not supported in this release.
INT ruReserved3	1.3.6.1.4.1.5454.1.40.3.2	INTEGER	read-write	Reboot RU. Not supported in this release.
INT ruReserved4	1.3.6.1.4.1.5454.1.40.3.3	INTEGER	read-only	Distance of RU in mile. Not supported in this release.
sys	1.3.6.1.4.1.5454.1.40.1
INT sysActivateOpmode	1.3.6.1.4.1.5454.1.40.1.5	INTEGER	read-write	Turn on opmode
INT sysCurrentOpmode	1.3.6.1.4.1.5454.1.40.1.4	INTEGER	read-only	Current Opmode
INT sysDefaultOpmode	1.3.6.1.4.1.5454.1.40.1.3	INTEGER	read-write	Default Opmode
INT sysEncryptEnable	1.3.6.1.4.1.5454.1.40.1.15	INTEGER	read-write	Enable/Disable Encrypt
OPA sysEncryptKey	1.3.6.1.4.1.5454.1.40.1.16	Opaque	read-write	Encrypt Key
sysipconfig	1.3.6.1.4.1.5454.1.40.1.13
STR sysipconfigChange	1.3.6.1.4.1.5454.1.40.1.13.4	DisplayString	read-write	New IP Address, Subnet Mask and Default Gateway xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
IP sysipconfigDefaultGateway	1.3.6.1.4.1.5454.1.40.1.13.3	IpAddress	read-write	Default gateway
IP sysipconfigIpAddress	1.3.6.1.4.1.5454.1.40.1.13.1	IpAddress	read-write	IP address
IP sysipconfigSubnet	1.3.6.1.4.1.5454.1.40.1.13.2	IpAddress	read-write	Subnet mask
OCT sysMAC	1.3.6.1.4.1.5454.1.40.1.2	OCTET STRING	read-only	MAC Address
STR sysReadCommStr	1.3.6.1.4.1.5454.1.40.1.6	DisplayString	read-write	SNMP agent read community string. It is used for authentication purpose.
INT sysReboot	1.3.6.1.4.1.5454.1.40.1.12	INTEGER	read-write	Reboot the master unit.
STR sysRemarks	1.3.6.1.4.1.5454.1.40.1.14	DisplayString	read-write	Remarks
INT sysReserved1	1.3.6.1.4.1.5454.1.40.1.11	INTEGER	read-write	Save system setting values to Flash and activate the settings. Not supported in this release.
syssw	1.3.6.1.4.1.5454.1.40.1.8
INT sysswARQEnable	1.3.6.1.4.1.5454.1.40.1.8.8	INTEGER	read-write	ARQ Enable (MU Only)
INT sysswAutoRateShiftingEnable	1.3.6.1.4.1.5454.1.40.1.8.2	INTEGER	read-write	Switch to different speed rate automatically to get the maximum throughput value.
INT sysswAutoScanMUSignal	1.3.6.1.4.1.5454.1.40.1.8.3	INTEGER	read-write	Remote unit scans to all channel frequencies to listen to its master's heart-beat (RU Only).
INT sysswRSSILEDFlashEnable	1.3.6.1.4.1.5454.1.40.1.8.4	INTEGER	read-write	Enabling RSSI LED to blink based on its current RSSI value.
INT sysswTftpServerEnable	1.3.6.1.4.1.5454.1.40.1.8.1	INTEGER	read-write	Enable or disable to receive code or fileset download.
systraffic	1.3.6.1.4.1.5454.1.40.1.9
C32 systrafficEthInOctetsEx	1.3.6.1.4.1.5454.1.40.1.9.1	Counter32	read-only	Number of payload octets received on Ethernet port.
C32 systrafficEthOutOctets	1.3.6.1.4.1.5454.1.40.1.9.2	Counter32	read-only	Number of payload octets transmitted on Ethernet port.
C32 systrafficRfInOctets	1.3.6.1.4.1.5454.1.40.1.9.3	Counter32	read-only	Number of octets of remote's payload received from RF port.
C32 systrafficRfOutOctets	1.3.6.1.4.1.5454.1.40.1.9.4	Counter32	read-only	Number of octets of remote's payload transmitted to RF port.
STR sysWriteCommStr	1.3.6.1.4.1.5454.1.40.1.7	DisplayString	read-write	SNMP agent write community string. It is used for authentication purpose.
tbw	1.3.6.1.4.1.5454.1
trango	1.3.6.1.4.1.5454
trangoCompl	1.3.6.1.4.1.5454.1.40.7.2
trangoConf	1.3.6.1.4.1.5454.1.40.7
trangoEvents	1.3.6.1.4.1.5454.1.40.6
trangoEventsV2	1.3.6.1.4.1.5454.1.40.6.0
trangoGroups	1.3.6.1.4.1.5454.1.40.7.1
trangoModules	1.3.6.1.4.1.5454.10
trangoP5M	1.3.6.1.4.1.5454.10.10			The Trango SNMP General MIB Module for Atlas Point to Point P5M
trap	1.3.6.1.4.1.5454.1.40.4
STR trapTrapCommStr	1.3.6.1.4.1.5454.1.40.4.3	DisplayString	read-write	Trap community string.
INT trapTrapDstEnabling	1.3.6.1.4.1.5454.1.40.4.1.1.2	INTEGER	read-write	Enabled or Disabled sending trap.
trapTrapDstEntry	1.3.6.1.4.1.5454.1.40.4.1.1		not-accessible	Allows configuration of the reporting mechanisms for a particular event.
INT trapTrapDstIndex	1.3.6.1.4.1.5454.1.40.4.1.1.1	INTEGER	not-accessible	Event Index.
IP trapTrapDstIpAddress	1.3.6.1.4.1.5454.1.40.4.2	IpAddress	read-write	The IP Address of a management station to send traps to.
trapTrapDstTable	1.3.6.1.4.1.5454.1.40.4.1		not-accessible	This table allows control of the reporting of traps generated by monitoring the operation of master or remote.
ver	1.3.6.1.4.1.5454.1.40.1.1
STR verFW	1.3.6.1.4.1.5454.1.40.1.1.3	DisplayString	read-only	Main firmware version HD
OCT verHW	1.3.6.1.4.1.5454.1.40.1.1.2	OCTET STRING	read-only	Hardware Version
versionComplV2	1.3.6.1.4.1.5454.1.40.7.2.1			The implementation requirements for Trango products that support SNMP.
INT verUintType	1.3.6.1.4.1.5454.1.40.1.1.1	INTEGER	read-write	MU/RU

RFC description

Trango wireless P5M platform vendor-private MIB; manages performance metrics and configuration on Trango point-to-multipoint systems.

Start monitoring Trango Systems Atlas P5M point-to-multipoint wireless backhaul radio (hardware/firmware revision status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TRANGO-P5M-MIB