TPLINK-SFLOW-MIB

All MIBs › TPLINK-SFLOW-MIB

Organization: TPLINK

Last Updated: 2015-09-23

Category: QoS and Traffic Management

Description: Manages TP-Link switch sFlow traffic sampling configuration, collector addresses, and sampling rates.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPLINK-SFLOW-MIB?

TPLINK-SFLOW-MIB is a TP-LINK proprietary MIB configuring sFlow traffic-sampling export on TP-LINK managed switches. Its objects cover a global config status/address/version, a collector table (ID, description, IP/port, max datagram size, timeout, lifetime), and a sampler table (port, collector ID, ingress/egress rate, max header size, port-LAG association). As a configuration MIB it lets an administrator confirm sFlow collector destination and per-port sampling rate on a TP-LINK switch. It is deployed on TP-LINK managed switches. Engineers can download the TPLINK-SFLOW-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPLINK-SFLOW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

TP-LINK managed switches

Monitoring Examples

An administrator checks tpSflowCollectorCollectorIp and tpSflowSamplerIngRate to confirm sFlow collector destination and sampling rate on a TP-LINK switch.

What Can Be Monitored

sFlow collector destination and sampling-rate configuration

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From TPLINK-MIB

tplinkMgmt

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
tplinkSflowMIB	1.3.6.1.4.1.11863.6.95			Private MIB for the sFlow configuration.
tplinkSflowMIBObjects	1.3.6.1.4.1.11863.6.95.1
tpSflowGlobalConfig	1.3.6.1.4.1.11863.6.95.1.1
INT tpSflowGlobalConfigStatus	1.3.6.1.4.1.11863.6.95.1.1.1	INTEGER	read-write	Allows you to Enable/Disable the sFlow function. 0. disable 1. enable
IP tpSflowGlobalConfigAddress	1.3.6.1.4.1.11863.6.95.1.1.2	IpAddress	read-write	The IP address of the agent.
INT tpSflowGlobalConfigVersion	1.3.6.1.4.1.11863.6.95.1.1.3	INTEGER	read-only	The sFlow version number.
tpSflowCollector	1.3.6.1.4.1.11863.6.95.1.2
tpSflowCollectorTable	1.3.6.1.4.1.11863.6.95.1.2.1		not-accessible	A list of sflow collector entries. Here you can configure the sflow collector.
tpSflowCollectorEntry	1.3.6.1.4.1.11863.6.95.1.2.1.1		not-accessible	An entry contains the information of sflow collector.
INT tpSflowCollectorCollectorId	1.3.6.1.4.1.11863.6.95.1.2.1.1.1	INTEGER	read-only	The collector ID.
STR tpSflowCollectorDescription	1.3.6.1.4.1.11863.6.95.1.2.1.1.2	DisplayString	read-write	This description of the collector.
IP tpSflowCollectorCollectorIp	1.3.6.1.4.1.11863.6.95.1.2.1.1.3	IpAddress	read-write	The IP address of the collector
INT tpSflowCollectorCollectorPort	1.3.6.1.4.1.11863.6.95.1.2.1.1.4	INTEGER	read-write	The UDP port of the collector.
INT tpSflowCollectorMaxDatagram	1.3.6.1.4.1.11863.6.95.1.2.1.1.5	INTEGER	read-write	The max datagram of the collector.
INT tpSflowCollectorTimeout	1.3.6.1.4.1.11863.6.95.1.2.1.1.6	INTEGER	read-write	The timeout value of the collector.
INT tpSflowCollectorLifetime	1.3.6.1.4.1.11863.6.95.1.2.1.1.7	INTEGER	read-only	The lifetime of the collector.
tpSflowSampler	1.3.6.1.4.1.11863.6.95.1.3
tpSflowSamplerTable	1.3.6.1.4.1.11863.6.95.1.3.1		not-accessible	A list of sflow sampler entries. Here you can configure the sflow sampler.
tpSflowSamplerEntry	1.3.6.1.4.1.11863.6.95.1.3.1.1		not-accessible	An entry contains the information of the sflow sampler.
STR tpSflowSamplerPort	1.3.6.1.4.1.11863.6.95.1.3.1.1.1	DisplayString	read-only	The port number of the switch.
INT tpSflowSamplerCollectorId	1.3.6.1.4.1.11863.6.95.1.3.1.1.2	INTEGER	read-write	The collector ID.
INT tpSflowSamplerIngRate	1.3.6.1.4.1.11863.6.95.1.3.1.1.3	INTEGER	read-write	The ratio of ingress packets to the samples generated(Range:0, 1024-65535).
INT tpSflowSamplerEgRate	1.3.6.1.4.1.11863.6.95.1.3.1.1.4	INTEGER	read-write	The ratio of egress packets to the samples generated(Range:0, 1024-65535).
INT tpSflowSamplerMaxHeader	1.3.6.1.4.1.11863.6.95.1.3.1.1.5	INTEGER	read-write	The maximum number of bytes that should be sampled.
OCT tpSflowSamplerPortLag	1.3.6.1.4.1.11863.6.95.1.3.1.1.6	OCTET STRING	read-only	The LAG number which the port belongs to.

RFC description

TP-LINK sFlow packet sampling MIB for traffic monitoring collector configuration and per-interface sampler settings.

Start monitoring TP-LINK managed switches (sFlow collector/sampler config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPLINK-SFLOW-MIB

What Is TPLINK-SFLOW-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description