| OID symbolic | OID numeric | Type | Access | Description |
|---|
| tnDOT3OAMMIBModule | 1.3.6.1.4.1.7483.5.1.3.42 | | | This document is the SNMP MIB module to manage and provision Ethernet
OAM (802.3ah) functionality for the Nokia 7xxx device. This includes
extensions to the DOT3-OAM-MIB defined in IEEE 802.3ah to allow transmit
interval configuration and other locally configured modifications.
Copyright 2006-2009 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Nokia
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Nokia
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. |
| tnDot3OamObjs | 1.3.6.1.4.1.7483.6.1.2.42 | | | |
| tnDot3OamEntryObjs | 1.3.6.1.4.1.7483.6.1.2.42.1 | | | |
| tnDot3OamTable | 1.3.6.1.4.1.7483.6.1.2.42.1.1 | | not-accessible | The tnDot3OamTable is used to store proprietary configuration
information on a particular Ethernet like interface (OAM entity)
in the system that supports the OAM functions defined in [802.3ah]. |
| tnDot3OamEntry | 1.3.6.1.4.1.7483.6.1.2.42.1.1.1 | | not-accessible | An entry in the tnDot3OamTable containing configuration
information applicable to an OAM entity. |
| TIM tnDot3OamLastChanged | 1.3.6.1.4.1.7483.6.1.2.42.1.1.1.1 | TimeStamp | read-only | The value of tnDot3OamLastChanged indicates
the sysUpTime value when this row was last modified. |
| U32 tnDot3OamInterval | 1.3.6.1.4.1.7483.6.1.2.42.1.1.1.2 | Unsigned32 | read-write | The value of tnDot3OamInterval specifies the number of 100ms
time intervals between each periodic OAMPDU transmit and receive.
A lower value implies that OAMPDUs will be transmitted more
frequently to the peer, and OAMPDUs must be received more frequently
from the peer. The default is set to 10, meaning 1 second between
transmits and receives. |
| U32 tnDot3OamMultiplier | 1.3.6.1.4.1.7483.6.1.2.42.1.1.1.3 | Unsigned32 | read-write | The value of tnDot3OamMultiplier specifies how many receive
intervals may expire with no OAMPDU receive. After the configured
number of intervals with OAMPDU receive have passed, the OAM
negotiation process will restart. |
| T/F tnDot3OamTunneling | 1.3.6.1.4.1.7483.6.1.2.42.1.1.1.4 | TruthValue | read-write | The value of tnDot3OamTunneling specifies if OAMPDUs should
be passed transparently through the OAM entity for processing
by another OAM entity across the network, or if OAMPDUs should be
terminated and processed at the local OAM entity. This object
can only be set to 'true' if dot3OamAdminState is set to 'disabled'.
Likewise, dot3OamAdminState can only be set to 'enabled' if this
object is set to 'false'. It is not valid to try and enable both
OAMPDU processing and OAMPDU tunneling on the same OAM entity. |
| T/F tnDot3OamLooped | 1.3.6.1.4.1.7483.6.1.2.42.1.1.1.5 | TruthValue | read-only | The value of tnDot3OamLooped indicates if the OAM entity
is receiving OAMPDUs that it transmitted. A value of 'true'
indicates that the OAM entity is receiving it's own OAMPDUs while
a value of 'false' indicates it is not. |
| U32 tnDot3OamHoldTime | 1.3.6.1.4.1.7483.6.1.2.42.1.1.1.6 | Unsigned32 | read-write | The value of tnDot3OamHoldTime specifies the number of seconds
the efm-oam protocol should wait after dot3OamOperStatus transitions
from 'operational (9)' to a non-operational state before going back to
the 'operational (9)' state again. Note that a transition to the
'linkFault (2)' state does not cause tnDot3OamHoldTime to be used if
dot3OamOperStatus was previously in the 'operational (9)' state. |
| tnDot3OamLoopbackObjs | 1.3.6.1.4.1.7483.6.1.2.42.2 | | | |
| tnDot3OamLoopbackTable | 1.3.6.1.4.1.7483.6.1.2.42.2.1 | | not-accessible | The tnDot3OamLoopbackTable is used to store proprietary
loopback configuration information on a particular
Ethernet like interface (OAM entity) in the system that supports
the OAM functions defined in [802.3ah]. |
| tnDot3OamLoopbackEntry | 1.3.6.1.4.1.7483.6.1.2.42.2.1.1 | | not-accessible | An entry in the tnDot3OamLoopbackTable containing
configuration information applicable to an OAM entity. |
| TIM tnDot3OamLoopbackLastChanged | 1.3.6.1.4.1.7483.6.1.2.42.2.1.1.1 | TimeStamp | read-only | The value of tnDot3OamLoopbackLastChanged indicates
the sysUpTime value when this row was last modified. |
| INT tnDot3OamLoopbackLocalStatus | 1.3.6.1.4.1.7483.6.1.2.42.2.1.1.2 | INTEGER | read-write | The value of tnDot3OamLoopbackLocalStatus indicates the local
loopback status of the OAM entity. This attribute allows the user
to manually set the local OAM entity loopback mode overriding the
802.3ah protocol for loopback. Setting the value to 'localLoopback'
can only be done if dot3OamLoopbackStatus is set to 'noLoopback'.
If dot3OamLoopbackStatus is any value other than 'noLoopback', the
changes to tnDot3OamLoopbackLocalStatus will have no effect. If
dot3OamLoopbackStatus is set to 'localLoopback', the OAM entity will
act as if its peer put the OAM entity into local loopback. This
entry allows the user to put an OAM entity into local loopback mode,
even if dot3OamLoopbackIgnoreRx is set to 'ignore'. |
| tnDot3OamNotifyPrefix | 1.3.6.1.4.1.7483.6.1.3.42 | | | |
| tnDot3OamNotificationsPrefix | 1.3.6.1.4.1.7483.6.1.3.42.42 | | | |
| tnDot3OamNotifications | 1.3.6.1.4.1.7483.6.1.3.42.42.0 | | | |
| NTF tnDot3OamPeerChanged | 1.3.6.1.4.1.7483.6.1.3.42.42.0.1 | | | The tnDot3OamPeerChanged notification is generated
when the peer information (specifically the Peer MAC address)
changes. Note that this notification will only be sent out
if the peer information was previously available and the
information changed, and not when the peer information
is first learned or becomes unavailable. |
| NTF tnDot3OamLoopDetected | 1.3.6.1.4.1.7483.6.1.3.42.42.0.2 | | | The tnDot3OamLoopDetected notification is generated
when a port receives an 802.3ah PDU with a source MAC
address that matches the MAC address of that port. |
| NTF tnDot3OamLoopCleared | 1.3.6.1.4.1.7483.6.1.3.42.42.0.3 | | | The tnDot3OamLoopCleared notification is generated
when a port is no longer receiving 802.3ah PDUs with
a source MAC address that matches the MAC address of
that port. |
