All MIBs › TN-DOT3-OAM-MIB › tnDot3OamLoopbackLocalStatus
tnDot3OamLoopbackLocalStatus
Module: TN-DOT3-OAM-MIB
OID (symbolic): TN-DOT3-OAM-MIB::tnDot3OamLoopbackLocalStatus
OID (numeric): 1.3.6.1.4.1.7483.6.1.2.42.2.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of tnDot3OamLoopbackLocalStatus indicates the local loopback status of the OAM entity. This attribute allows the user to manually set the local OAM entity loopback mode overriding the 802.3ah protocol for loopback. Setting the value to 'localLoopback' can only be done if dot3OamLoopbackStatus is set to 'noLoopback'. If dot3OamLoopbackStatus is any value other than 'noLoopback', the changes to tnDot3OamLoopbackLocalStatus will have no effect. If dot3OamLoopbackStatus is set to 'localLoopback', the OAM entity will act as if its peer put the OAM entity into local loopback. This entry allows the user to put an OAM entity into local loopback mode, even if dot3OamLoopbackIgnoreRx is set to 'ignore'.
What is tnDot3OamLoopbackLocalStatus?
This object lets an admin manually force the local OAM entity into loopback mode, overriding the normal 802.3ah negotiated loopback behavior. Setting it to localLoopback only takes effect if dot3OamLoopbackStatus is currently noLoopback; once set, the OAM entity behaves as though its peer had requested loopback, and this override works even if dot3OamLoopbackIgnoreRx is set to ignore incoming loopback requests. A technician testing a suspect link end-to-end might set this object to localLoopback(2) to force the local interface into loopback for a cable test, then set it back to noLoopback(1) when done.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7483.6.1.2.42.2.1.1.2 snmpwalk -v2c -c public <target> TN-DOT3-OAM-MIB::tnDot3OamLoopbackLocalStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7483.6.1.2.42.2.1.1.2.1 snmpget -v2c -c public <target> TN-DOT3-OAM-MIB::tnDot3OamLoopbackLocalStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7483.6.1.2.42.2.1.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> tnDot3OamLoopbackLocalStatus.1
Start monitoring Nokia 7xxx transport equipment (802.3ah Ethernet OAM PDU timer/loopback status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TN-DOT3-OAM-MIB::tnDot3OamLoopbackLocalStatus OID value, configure state conditions and alerts, and monitor any Nokia 7xxx transport equipment (802.3ah Ethernet OAM PDU timer/loopback status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7483 | tropic | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6 | tnProducts | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6.1 | tnSRMIB | TROPIC-GLOBAL-REG |
| 1.3.6.1.4.1.7483.6.1.2 | tnSRObjs | TROPIC-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7483.6.1.2.42 | tnDot3OamObjs | TN-DOT3-OAM-MIB |
| 1.3.6.1.4.1.7483.6.1.2.42.2 | tnDot3OamLoopbackObjs | TN-DOT3-OAM-MIB |
| 1.3.6.1.4.1.7483.6.1.2.42.2.1 | tnDot3OamLoopbackTable | TN-DOT3-OAM-MIB |
| 1.3.6.1.4.1.7483.6.1.2.42.2.1.1 | tnDot3OamLoopbackEntry | TN-DOT3-OAM-MIB |
| 1.3.6.1.4.1.7483.6.1.2.42.2.1.1.2 | tnDot3OamLoopbackLocalStatus | TN-DOT3-OAM-MIB |