| OID symbolic | OID numeric | Type | Access | Description |
|---|
| tmsCommonMib | 1.3.6.1.4.1.731.2.2.1 | | | TMS Common Enterprise MIB definition. |
| tmsCommonNotify | 1.3.6.1.4.1.731.2.2.1.0 | | | |
| NTF tmsCommonSnmpV2TestTrap | 1.3.6.1.4.1.731.2.2.1.0.1 | | | This trap is used for the sample SNMP enterprise trap in the
'tmsCommonMiscTrapTest' object. Note that it includes the
'tmsCommonMiscProductName' object as a varbind. |
| tmsCommonVer | 1.3.6.1.4.1.731.2.2.1.1 | | | |
| I32 tmsCommonVerMIBMajor | 1.3.6.1.4.1.731.2.2.1.1.1 | Integer32 | read-only | Get this MIB Major version number. This number should
match the Major version given in the documentation header
at the beginning text of this MIB. Note that the '.c' file
corresponding to this MIB has to be manually edited to
change the version number if this file is modified and
the version number is therefore changed. |
| I32 tmsCommonVerMIBMinor | 1.3.6.1.4.1.731.2.2.1.1.2 | Integer32 | read-only | Get this MIB Minor version number. This number should
match the Minor version given in the documentation header
at the beginning text of this MIB. Note that the '.c' file
corresponding to this MIB has to be manually edited to
change the version number if this file is modified and
the version number is therefore changed. |
| I32 tmsCommonVerBootSWMajor | 1.3.6.1.4.1.731.2.2.1.1.3 | Integer32 | read-only | Get the Boot Software Major version number.
This number references the VxWorks TMS Boot ROM module. |
| I32 tmsCommonVerBootSWMinor | 1.3.6.1.4.1.731.2.2.1.1.4 | Integer32 | read-only | Get the Boot Software Minor version number.
This number references the VxWorks TMS Boot ROM module. |
| I32 tmsCommonVerAppSWMajor | 1.3.6.1.4.1.731.2.2.1.1.5 | Integer32 | read-only | Get the Application Software Major version number.
This number references the core TMS modules as a whole. |
| I32 tmsCommonVerAppSWMinor | 1.3.6.1.4.1.731.2.2.1.1.6 | Integer32 | read-only | Get the Application Software Minor version number.
This number references the core TMS modules as a whole. |
| tmsCommonIP | 1.3.6.1.4.1.731.2.2.1.2 | | | |
| MAC tmsCommonIPMACAddr | 1.3.6.1.4.1.731.2.2.1.2.1 | MacAddress | read-write | DURABLE: { '000000000000'H }
The base (i.e., first) MAC address used by the TMS agent for its
in-band ports. |
| IP tmsCommonIPIpAddress | 1.3.6.1.4.1.731.2.2.1.2.2 | IpAddress | read-write | DURABLE: { '00000000'H }
The IP Address for sw0 (swEND 0); only applies after reset -
see 'tmsCommonMiscReset'. |
| IP tmsCommonIPGateAddress | 1.3.6.1.4.1.731.2.2.1.2.3 | IpAddress | read-write | DURABLE: { '00000000'H }
The default Gateway Address (i.e., next hop router) for sw0
(swEND 0); only applies after reset - see 'tmsCommonMiscReset'. |
| IP tmsCommonIPNetMask | 1.3.6.1.4.1.731.2.2.1.2.4 | IpAddress | read-write | DURABLE: { 'ffffff00'H }
The IP NetMask for sw0 (swEND 0); only applies after reset -
see 'tmsCommonMiscReset'. |
| INT tmsCommonIPStatus | 1.3.6.1.4.1.731.2.2.1.2.5 | INTEGER | read-write | This object is used to synchronize the modification of the IP
parameters used by the protocol stack based on the tmsCommonIP
MIB objects. This allows the user to change tmsCommonIPMACAddr,
tmsCommonIPIpAddress, tmsCommonIPGateAddress, and
tmsCommonIPNetMask, and then apply the changes to the unit
using apply(4). If tmsCommonIPStatus returns notModified(1),
no modifications were made to any tmsCommonIP MIB objects.
If tmsCommonIPStatus returns modified(2), one or more objects
were changed, but have not been applied. Both notModified(1)
and modified(2) are read-only values; the agent returns a
SNMP_BADVALUE for sets using these values. Both restore(3) and
apply(4) are valid SET values. If one or more of the tmsCommonIP
objects were modified, the user can restore the parameters to a
mirror of the NVM values using restore(3). |
| tmsCommonLoad | 1.3.6.1.4.1.731.2.2.1.5 | | | |
| IP tmsCommonLoadTftpAddress | 1.3.6.1.4.1.731.2.2.1.5.1 | IpAddress | read-write | DURABLE:
The IP Address for the TFTP server used for downloading
and/or uploading files. |
| STR tmsCommonLoadTftpFileName | 1.3.6.1.4.1.731.2.2.1.5.2 | DisplayString | read-write | DURABLE:
The TFTP file path and name. |
| INT tmsCommonLoadType | 1.3.6.1.4.1.731.2.2.1.5.3 | INTEGER | read-write | DURABLE: { application }
The type of file to download or upload upon an
'tmsCommonLoadExecute'. WARNING: The boot should only be
downloaded when absolutely required (e.g., if power is
removed during the boot Flash write operation, the agent
cannot be recovered). |
| INT tmsCommonLoadExecute | 1.3.6.1.4.1.731.2.2.1.5.4 | INTEGER | read-write | Execute file download or upload procedure. A SET of this
object starts the load procedure. Note that the Application
and Boot images can only be downloaded. The NVM Configuration
file can be uploaded and downloaded. A GET of this object
will return the status of the executed operation.
Use 'tmsCommonLoadExecuteStatus' to determine the status of
the executed load. |
| INT tmsCommonLoadExecuteStatus | 1.3.6.1.4.1.731.2.2.1.5.5 | INTEGER | read-only | Provides status on the execute file load progress. |
| tmsCommonMisc | 1.3.6.1.4.1.731.2.2.1.6 | | | |
| INT tmsCommonMiscSaveToNvm | 1.3.6.1.4.1.731.2.2.1.6.1 | INTEGER | read-write | When set to 'save(2)', all nonvolatile configuration
parameters are saved to NVM (Nonvolatile Memory). NVM save
operations may be slow (e.g., erasing/writing Flash device).
Consequently, all or many updates should be made before
saving to NVM. Note that the SNMP set to 'save(2)' returns
immediately to the caller. Gets on this object then return
'saveInProgress(3)' until the save operation completes, at
which time 'noop(1)' is returned. Consequently, a get
operation always returns 'noop(1)' or 'saveInProgress(3)'
depending on the current state.
The agent returns 'badValue' for SNMPv1 or 'inconsistentValue'
for SNMPv2c/v3 for a set to 'Save(2)' while the current get
state is 'saveInProgress(3)'.
Attempts to set this object to 'saveInProgress(3)' returns
'badValue' for SNMPv1 or 'wrongValue' for SNMPv2c/v3. |
| INT tmsCommonMiscSnmpSecurityOnOff | 1.3.6.1.4.1.731.2.2.1.6.2 | INTEGER | read-write | Enable/Disable SNMPv1 Security. This object is now obsolete
and is not implemented. |
| INT tmsCommonMiscSpanOnOff | 1.3.6.1.4.1.731.2.2.1.6.3 | INTEGER | read-write | DURABLE: { enable }
Enable/Disable Spanning Tree for the bridge.
When 'disable(2)', all ports of the device are placed in the
forwarding mode, regardless of current Spanning Tree state.
When 'enable(1)', the normal STP state transitions take place. |
| INT tmsCommonMiscBOOTPOnOff | 1.3.6.1.4.1.731.2.2.1.6.4 | INTEGER | read-write | DURABLE: { disable }
Enable/Disable BOOTP operation for the TMS agent.
When 'disable(2)', no BOOTPs are transmitted by the Application.
When 'enable(1)', the Application sends BOOTP requests during
system startup. |
| INT tmsCommonMiscDHCPOnOff | 1.3.6.1.4.1.731.2.2.1.6.5 | INTEGER | read-write | DURABLE: { disable }
Enable/Disable DHCP operation for the TMS agent.
When 'disable(2)', no DHCPs are transmitted by the Application.
When enabled, the Application sends DHCP requests during
system startup. |
| INT tmsCommonMiscBaud | 1.3.6.1.4.1.731.2.2.1.6.6 | INTEGER | read-write | DURABLE: { baud38400 }
The serial port baud rate. Attributes include 8 data bits,
no parity and 1 stop bit (8N1) with hardware flow control.
Valid values are 2400, 9600, 19200, and 38400 baud. |
| STR tmsCommonMiscPassword | 1.3.6.1.4.1.731.2.2.1.6.7 | DisplayString | read-write | DURABLE: { 'password' }
The system password used for serial console, Telnet console
and Web page login. |
| STR tmsCommonMiscProductName | 1.3.6.1.4.1.731.2.2.1.6.8 | DisplayString | read-write | DURABLE: { 'WindRiver TMS Agent' }
The product name associated with this agent. This name is
displayed on the console screens and Web pages. |
| INT tmsCommonMiscReset | 1.3.6.1.4.1.731.2.2.1.6.9 | INTEGER | read-write | Physically performs a hardware reset of the unit.
Use with care. A 'reset(2)' resets the unit, a
'resetToDefaults(3)' resets the NVM configuration
to factory defaults and then resets the unit, and 'noop(1)'
does nothing. A value of 'noop(1)' is always returned for a
GET operation. |
| INT tmsCommonMiscTrapTest | 1.3.6.1.4.1.731.2.2.1.6.10 | INTEGER | read-write | This object sends a specific SNMP Trap, as selected by the type,
to the SNMP manager(s) to verify proper operation of the Notify
Subsystem. Note that the specific SNMP Message Processing Model
(SNMP v1, v2c or v3) is specified using 'snmpTargetParamsMPModel'
in the 'snmpTargetParamsTable' in RFC2573 (Target MIB).
To distinguish the linkdown(3) and linkup(4) test traps from the
actual link down and up traps, both trap types use '0' for the
ifIndex value.
Note that tmsTestTrap(6) generates a 'tmsCommonSnmpV2TestTrap'.
A GET always returns the 'noop(1)' value. |
| tmsCommonCommToView | 1.3.6.1.4.1.731.2.2.1.7 | | | |
| I32 tmsCommonComm2ViewIndex | 1.3.6.1.4.1.731.2.2.1.7.1.1.1 | Integer32 | not-accessible | A simple index into 'tmsCommonCommunityToViewTable'. |
| STR tmsCommonComm2ViewCommName | 1.3.6.1.4.1.731.2.2.1.7.1.1.2 | DisplayString | read-create | DURABLE: { 'public','':all }
The SNMPv1/v2c community name string. Duplicate community
names are not allowed in this table. Note that a null string
is not a valid community name (i.e., a null string forces
'tmsCommonComm2ViewRowStatus' to 'notReady(3)'). |
| STR tmsCommonComm2ViewViewName | 1.3.6.1.4.1.731.2.2.1.7.1.1.3 | SnmpAdminString | read-create | DURABLE: { 'internet':all }
At runtime (i.e., not when this object is SET), this view name
is compared to the 'vacmViewTreeFamilyViewName' in the
'vacmViewTreeFamilyTable' (see RFC2575). If a match is
found and the varbind(s) specify valid object type and instance,
the 'tmsCommonComm2ViewPermission' privilege is permitted.
Note that a null string is not a valid view name value.
Also note that the value of this object does not have to match
an existing entry in the 'vacmViewTreeFamilyTable' (if no match,
no access is allowed).
Note that the factory default value for this object is 'internet',
which allows access to the subtree under '1.3.6.1'. |
| INT tmsCommonComm2ViewPermission | 1.3.6.1.4.1.731.2.2.1.7.1.1.4 | INTEGER | read-create | DURABLE: { readWrite:all }
This object specifies the type of access allowed. 'readOnly(1)'
allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and
'readWrite(2)' allows both GET and SET operations. |
| ROW tmsCommonComm2ViewRowStatus | 1.3.6.1.4.1.731.2.2.1.7.1.1.5 | RowStatus | read-create | DURABLE:
This object indicates the status of this entry. A row in this
table can be created using the 'createAndGo(4)' (i.e., all
parameters must be valid - supplied in a single SNMP PDU or have
default values) or the 'createAndWait(5)' action states. Until
all parameters are valid for a conceptual row, this object is
'notReady(3)'. All parameters must be valid before this object
can be set to 'active(1)'.
Any object in a conceptual row can be modified independent of the
value of this object (e.g., can be changed while 'active(1)'). |
| tmsCommonIgmpSnoop | 1.3.6.1.4.1.731.2.2.1.8 | | | |
| T/F tmsCommonIgmpSnoopEnabled | 1.3.6.1.4.1.731.2.2.1.8.1 | TruthValue | read-write | DURABLE: { false )
Setting this object to true(1) enables IGMP Snooping. Setting
it to false(2) disables IGMP Snooping.
Note that IGMP Snooping can function with or without GVRP and
GMRP enabled. |
| T/F tmsCommonIgmpSnoopAlerts | 1.3.6.1.4.1.731.2.2.1.8.2 | TruthValue | read-write | DURABLE: { false )
Setting this object to true(1) enables the IP Router Alert
Option (as defined in RFC2113) for transmitted IGMP packets.
Setting it to false(2) disables this option. |
| I32 tmsCommonIgmpSnoopAging | 1.3.6.1.4.1.731.2.2.1.8.3 | Integer32 | read-write | DURABLE: { 300 )
The timeout period in seconds for aging out Multicast Groups
dynamically learned with IGMP Snooping. Note that aging operates
on a per interface per VLAN per multicast group basis. |
| tmsCommonIgmpSnoopTable | 1.3.6.1.4.1.731.2.2.1.8.4 | | not-accessible | This table, which provides IGMP Snooping information, augments
the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). |
| tmsCommonIgmpSnoopEntry | 1.3.6.1.4.1.731.2.2.1.8.4.1 | | not-accessible | Displays by VLAN, Multicast Group, and Multicast receive port
the set of ports enabled to forward Multicast Group traffic as
determined by the IGMP Snooping task. |
| POR tmsCommonIgmpSnoopEgressPorts | 1.3.6.1.4.1.731.2.2.1.8.4.1.1 | PortList | read-only | This read-only object displays the set of ports enabled to
forward specific Multicast Group traffic as determined by the
IGMP Snooping task.
It should be noted that the IGMP Snooping task generates a pseudo-
static (i.e., not saved in NVM) port list similar to the RFC2674
Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently,
a port will not be a member of 'tmsCommonIgmpSnoopEgressPorts' if
it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'. |
| tmsCommonConformance | 1.3.6.1.4.1.731.2.2.1.9 | | | |
| tmsCommonGroups | 1.3.6.1.4.1.731.2.2.1.9.1 | | | |
| tmsCommonVerGroup | 1.3.6.1.4.1.731.2.2.1.9.1.1 | | | This group retrieves system component versions. |
| tmsCommonIPGroup | 1.3.6.1.4.1.731.2.2.1.9.1.2 | | | This group configures and retrieves IP related objects. |
| tmsCommonLoadGroup | 1.3.6.1.4.1.731.2.2.1.9.1.3 | | | This group configures and retrieves TFTP download and upload
objects. |
| tmsCommonMiscGroup | 1.3.6.1.4.1.731.2.2.1.9.1.4 | | | This group configures and retrieves misc. switch objects. |
| tmsCommonCommToViewGroup | 1.3.6.1.4.1.731.2.2.1.9.1.5 | | | This group configures and retrieves community-to-view SNMP
information. |
| tmsCommonIgmpSnoopGroup | 1.3.6.1.4.1.731.2.2.1.9.1.6 | | | This group configures and retrieves IGMP Snooping information. |
| tmsCommonCompliances | 1.3.6.1.4.1.731.2.2.1.9.2 | | | |
| tmsCommonCompliance | 1.3.6.1.4.1.731.2.2.1.9.2.1 | | | The compliance statement. |
