TMS-COMMON-MIB DEFINITIONS ::= BEGIN ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ -- -- File : tmsCommon.mib -- Description : Sample TMS Common Enterprise MIB - Hardward Independent -- Version : 0.14 -- Date : November 2, 2000 -- -- Copyright (c) 1999-2000 Wind River Systems, Inc. All Rights Reserved. -- -- The original sample TMS 1.0 "oem-pm3575.mib" enterprise MIB has been -- split into two separate sample enterprise MIBs: -- 1. "tmsCommon.mi2" (this MIB) that is common to all TMS applications -- (i.e., hardware independent). -- 2. "bcm5600-oem.mi2" that is an OEM-product enterprise MIB that is SSP -- (Switch Support Package) specific for the Broadcom StrataSwitch. -- -- Reproduction of this document is authorized on condition that this -- copyright notice is included. This sample TMS Common Enterprise MIB -- embodies proprietary intellectual property of Wind River Systems (WRS). -- WRS retains all title and ownership in the specification, including any -- revisions. -- -- It is the intent of WRS to encourage the widespread use of this -- specification in connection with the management of TMS-based products. -- WRS grants vendors, end-users, and other interested parties a -- non-exclusive license to use this specification in connection with the -- management of TMS products. -- -- This specification is supplied "AS IS", and WRS makes no warranty, -- either express or implied, as to the use, operations, condition, -- or performance of this specification. -- ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ -- Sample WRS TMS Common Enterprise MIB -- -- NOTES: -- 1. This is a SMIv2 MIB. -- -- 2. Common Groups are those defined without dependence upon the -- underlying hardware or architecture. -- -- 3. The following groups are supported for the WRS TMS Common -- Enterprise MIB: -- - tmsCommonVer Retrieve version information -- - tmsCommonIP Configure/retrieve IP connectivity items -- - tmsCommonLoad Configure file download/upload parameters -- - tmsCommonMisc Configure/retrieve miscellaneous items -- - tmsCommonCommToView Configure/retrieve SNMP Community-to-View -- - tmsCommonIgmpSnoop Configure/retrieve IGMP Snooping information -- ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, MacAddress, RowStatus, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF tmsGeneric FROM WRS-MASTER-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB PortList, dot1qStaticMulticastEntry FROM Q-BRIDGE-MIB; tmsCommonMib MODULE-IDENTITY LAST-UPDATED "200011020000Z" -- November 2, 2000 ORGANIZATION "Wind River Systems, Inc." CONTACT-INFO "Wind River Systems, Inc. E-mail: support@windriver.com" DESCRIPTION "TMS Common Enterprise MIB definition." REVISION "200011020000Z" -- November 2, 2000 DESCRIPTION "Initial MIB creation." ::= { tmsGeneric 1 } ------------------------------------------------------------------------------ -- Textual Conventions (i.e., these do not affect object encoding): ------------------------------------------------------------------------------ -- -- "DURABLE": -- Objects that are saved across a system reset and/or power cycle -- are noted as "DURABLE" for convenience in the DESCRIPTION -- section of the object definition. Code must be explicitly -- written to implement these DURABLE objects. -- ------------------------------------------------------------------------------ -- define groups in TMS-COMMON-MIB ------------------------------------------------------------------------------ tmsCommonNotify OBJECT IDENTIFIER ::= { tmsCommonMib 0 } tmsCommonVer OBJECT IDENTIFIER ::= { tmsCommonMib 1 } tmsCommonIP OBJECT IDENTIFIER ::= { tmsCommonMib 2 } -- tmsCommonAuth OBJECT IDENTIFIER ::= { tmsCommonMib 3 } obsolete -- tmsCommonTrap OBJECT IDENTIFIER ::= { tmsCommonMib 4 } obsolete tmsCommonLoad OBJECT IDENTIFIER ::= { tmsCommonMib 5 } tmsCommonMisc OBJECT IDENTIFIER ::= { tmsCommonMib 6 } tmsCommonCommToView OBJECT IDENTIFIER ::= { tmsCommonMib 7 } tmsCommonIgmpSnoop OBJECT IDENTIFIER ::= { tmsCommonMib 8 } tmsCommonConformance OBJECT IDENTIFIER ::= { tmsCommonMib 9 } tmsCommonGroups OBJECT IDENTIFIER ::= { tmsCommonConformance 1 } tmsCommonCompliances OBJECT IDENTIFIER ::= { tmsCommonConformance 2 } -- ------------------------------------------------------------------------------ -- -- tmsCommonVer - Version Group -- -- This group enables the retrieval of version information for -- various components in the system. -- -- Some version numbers have the concept of "Major.Minor" designators. -- In these version numbers, the Major designator represents the -- primary release version, while the Minor designator represents -- the secondary version, incremented for bug-fixes or non-critical -- modifications. For example, the version number 1.2 has "1" as -- the Major version number and "2" as the minor version number. -- ------------------------------------------------------------------------------ -- tmsCommonVerMIBMajor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Get this MIB Major version number. This number should match the Major version given in the documentation header at the beginning text of this MIB. Note that the '.c' file corresponding to this MIB has to be manually edited to change the version number if this file is modified and the version number is therefore changed." ::= { tmsCommonVer 1 } tmsCommonVerMIBMinor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Get this MIB Minor version number. This number should match the Minor version given in the documentation header at the beginning text of this MIB. Note that the '.c' file corresponding to this MIB has to be manually edited to change the version number if this file is modified and the version number is therefore changed." ::= { tmsCommonVer 2 } tmsCommonVerBootSWMajor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Get the Boot Software Major version number. This number references the VxWorks TMS Boot ROM module." ::= { tmsCommonVer 3 } tmsCommonVerBootSWMinor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Get the Boot Software Minor version number. This number references the VxWorks TMS Boot ROM module." ::= { tmsCommonVer 4 } tmsCommonVerAppSWMajor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Get the Application Software Major version number. This number references the core TMS modules as a whole." ::= { tmsCommonVer 5 } tmsCommonVerAppSWMinor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Get the Application Software Minor version number. This number references the core TMS modules as a whole." ::= { tmsCommonVer 6 } ------------------------------------------------------------------------------ -- -- tmsCommonIP - IP Connectivity Information -- -- This group is meant to be a collection of controls and data -- that configure the device for IP connectivity. -- ------------------------------------------------------------------------------ -- tmsCommonIPMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { '000000000000'H } The base (i.e., first) MAC address used by the TMS agent for its in-band ports." ::= { tmsCommonIP 1 } tmsCommonIPIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { '00000000'H } The IP Address for sw0 (swEND 0); only applies after reset - see 'tmsCommonMiscReset'." ::= { tmsCommonIP 2 } tmsCommonIPGateAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { '00000000'H } The default Gateway Address (i.e., next hop router) for sw0 (swEND 0); only applies after reset - see 'tmsCommonMiscReset'." ::= { tmsCommonIP 3 } tmsCommonIPNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 'ffffff00'H } The IP NetMask for sw0 (swEND 0); only applies after reset - see 'tmsCommonMiscReset'." ::= { tmsCommonIP 4 } tmsCommonIPStatus OBJECT-TYPE SYNTAX INTEGER { notModified(1), modified(2), restore(3), apply(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the tmsCommonIP MIB objects. This allows the user to change tmsCommonIPMACAddr, tmsCommonIPIpAddress, tmsCommonIPGateAddress, and tmsCommonIPNetMask, and then apply the changes to the unit using apply(4). If tmsCommonIPStatus returns notModified(1), no modifications were made to any tmsCommonIP MIB objects. If tmsCommonIPStatus returns modified(2), one or more objects were changed, but have not been applied. Both notModified(1) and modified(2) are read-only values; the agent returns a SNMP_BADVALUE for sets using these values. Both restore(3) and apply(4) are valid SET values. If one or more of the tmsCommonIP objects were modified, the user can restore the parameters to a mirror of the NVM values using restore(3)." ::= { tmsCommonIP 5 } ------------------------------------------------------------------------------ -- -- tmsCommonLoad - Load TFTP Group -- -- This group is a collection of objects used to configure the TFTP file -- download and upload facilities. This group may be used to upload and -- download the NVM configuration file or to download either the TMS -- Application or Boot image. -- ------------------------------------------------------------------------------ -- tmsCommonLoadTftpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The IP Address for the TFTP server used for downloading and/or uploading files." ::= { tmsCommonLoad 1 } tmsCommonLoadTftpFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The TFTP file path and name." ::= { tmsCommonLoad 2 } tmsCommonLoadType OBJECT-TYPE SYNTAX INTEGER { application(1), boot(2), configuration(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { application } The type of file to download or upload upon an 'tmsCommonLoadExecute'. WARNING: The boot should only be downloaded when absolutely required (e.g., if power is removed during the boot Flash write operation, the agent cannot be recovered)." ::= { tmsCommonLoad 3 } tmsCommonLoadExecute OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation download(2), -- Application, Boot, or Configuration upload(3) -- Configuration only } MAX-ACCESS read-write STATUS current DESCRIPTION "Execute file download or upload procedure. A SET of this object starts the load procedure. Note that the Application and Boot images can only be downloaded. The NVM Configuration file can be uploaded and downloaded. A GET of this object will return the status of the executed operation. Use 'tmsCommonLoadExecuteStatus' to determine the status of the executed load." ::= { tmsCommonLoad 4 } tmsCommonLoadExecuteStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), -- download has not yet started inProgress(2), -- download has not yet finished success(3), -- download has finished successfully errorConnection(4), -- download cannot connect errorFilename(5), -- download has bad image path/filename errorFault(6) -- download has fault condition on device } MAX-ACCESS read-only STATUS current DESCRIPTION "Provides status on the execute file load progress." ::= { tmsCommonLoad 5 } ------------------------------------------------------------------------------ -- -- tmsCommonMisc - Miscellaneous Information -- -- This group is meant to be a collection of controls and data -- that do not require a group of their own, or fall into the -- category of "miscellaneous". The user may easily add simple -- objects in this group without destroying the integrity or definition -- of the group. -- ------------------------------------------------------------------------------ -- tmsCommonMiscSaveToNvm OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation save(2), -- save all configuration parameters to NVM saveInProgress(3) -- read-only: NVM save in progress } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 'save(2)', all nonvolatile configuration parameters are saved to NVM (Nonvolatile Memory). NVM save operations may be slow (e.g., erasing/writing Flash device). Consequently, all or many updates should be made before saving to NVM. Note that the SNMP set to 'save(2)' returns immediately to the caller. Gets on this object then return 'saveInProgress(3)' until the save operation completes, at which time 'noop(1)' is returned. Consequently, a get operation always returns 'noop(1)' or 'saveInProgress(3)' depending on the current state. The agent returns 'badValue' for SNMPv1 or 'inconsistentValue' for SNMPv2c/v3 for a set to 'Save(2)' while the current get state is 'saveInProgress(3)'. Attempts to set this object to 'saveInProgress(3)' returns 'badValue' for SNMPv1 or 'wrongValue' for SNMPv2c/v3." ::= { tmsCommonMisc 1 } tmsCommonMiscSnmpSecurityOnOff OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Enable/Disable SNMPv1 Security. This object is now obsolete and is not implemented." ::= { tmsCommonMisc 2 } tmsCommonMiscSpanOnOff OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { enable } Enable/Disable Spanning Tree for the bridge. When 'disable(2)', all ports of the device are placed in the forwarding mode, regardless of current Spanning Tree state. When 'enable(1)', the normal STP state transitions take place." ::= { tmsCommonMisc 3 } tmsCommonMiscBOOTPOnOff OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { disable } Enable/Disable BOOTP operation for the TMS agent. When 'disable(2)', no BOOTPs are transmitted by the Application. When 'enable(1)', the Application sends BOOTP requests during system startup." ::= { tmsCommonMisc 4 } tmsCommonMiscDHCPOnOff OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { disable } Enable/Disable DHCP operation for the TMS agent. When 'disable(2)', no DHCPs are transmitted by the Application. When enabled, the Application sends DHCP requests during system startup." ::= { tmsCommonMisc 5 } tmsCommonMiscBaud OBJECT-TYPE SYNTAX INTEGER { baud2400(1), baud9600(2), baud19200(3), baud38400(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { baud38400 } The serial port baud rate. Attributes include 8 data bits, no parity and 1 stop bit (8N1) with hardware flow control. Valid values are 2400, 9600, 19200, and 38400 baud." ::= { tmsCommonMisc 6 } tmsCommonMiscPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 'password' } The system password used for serial console, Telnet console and Web page login." ::= { tmsCommonMisc 7 } tmsCommonMiscProductName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 'WindRiver TMS Agent' } The product name associated with this agent. This name is displayed on the console screens and Web pages." ::= { tmsCommonMisc 8 } tmsCommonMiscReset OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation reset(2), -- reset unit resetToDefaults(3) -- reset to factory defaults/reset unit } MAX-ACCESS read-write STATUS current DESCRIPTION "Physically performs a hardware reset of the unit. Use with care. A 'reset(2)' resets the unit, a 'resetToDefaults(3)' resets the NVM configuration to factory defaults and then resets the unit, and 'noop(1)' does nothing. A value of 'noop(1)' is always returned for a GET operation." ::= { tmsCommonMisc 9 } tmsCommonMiscTrapTest OBJECT-TYPE SYNTAX INTEGER { noop(1), coldstart(2), linkdown(3), linkup(4), authentication(5), tmsTestTrap(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sends a specific SNMP Trap, as selected by the type, to the SNMP manager(s) to verify proper operation of the Notify Subsystem. Note that the specific SNMP Message Processing Model (SNMP v1, v2c or v3) is specified using 'snmpTargetParamsMPModel' in the 'snmpTargetParamsTable' in RFC2573 (Target MIB). To distinguish the linkdown(3) and linkup(4) test traps from the actual link down and up traps, both trap types use '0' for the ifIndex value. Note that tmsTestTrap(6) generates a 'tmsCommonSnmpV2TestTrap'. A GET always returns the 'noop(1)' value." ::= { tmsCommonMisc 10 } ------------------------------------------------------------------------------ -- -- tmsCommonCommToView - SNMP 'Community-to-View' Mapping -- -- Starting with TMS 1.1, SNMP access uses the SNMP-VIEW-BASED-ACM-MIB -- (RFC2575) for all SNMP versions (i.e., v1, v2c and v3). Note that SNMP -- v1 and v2c both use the SNMP 'community string' to implement limited -- security and administrative control. Consequently, to support the -- 'View-based Access Control Model' for SNMPv1/v2c requires a mechanism to -- map the 'community string' to a 'view'. This is implemented using the -- 'tmsCommonCommunityToViewTable'. This table allows up to 8 unique -- community strings to be mapped to the same or different views as defined -- in the SNMP-VIEW-BASED-ACM-MIB. Each community can have read-only or -- read-write access permission. -- -- For test and development purposes, the factory default setting includes -- a single 'active(1)' entry for index '1' that contains: -- tmsCommonComm2ViewCommName = "public" -- tmsCommonComm2ViewViewName = "internet" ==>1.3.6.1 -- tmsCommonComm2ViewPermission = "readWrite(2)" -- -- These default settings, in conjunction with a corresponding factory -- default entry in the RFC2575 'vacmViewTreeFamilyTable', allow full GET -- and SET access for the entire 'internet' MIB subtree. Although useful -- for test and development, this is not a desirable default for a -- production switch. -- ------------------------------------------------------------------------------ -- tmsCommonCommunityToViewTable OBJECT-TYPE SYNTAX SEQUENCE OF TmsCommonCommunityToViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of SNMPv1/v2c community string to view name mappings." ::= { tmsCommonCommToView 1 } tmsCommonCommunityToViewEntry OBJECT-TYPE SYNTAX TmsCommonCommunityToViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of community-to-view parameters." INDEX { tmsCommonComm2ViewIndex } ::= { tmsCommonCommunityToViewTable 1 } TmsCommonCommunityToViewEntry ::= SEQUENCE { tmsCommonComm2ViewIndex Integer32, tmsCommonComm2ViewCommName DisplayString, tmsCommonComm2ViewViewName SnmpAdminString, tmsCommonComm2ViewPermission INTEGER, tmsCommonComm2ViewRowStatus RowStatus } tmsCommonComm2ViewIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A simple index into 'tmsCommonCommunityToViewTable'." ::= { tmsCommonCommunityToViewEntry 1 } tmsCommonComm2ViewCommName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Duplicate community names are not allowed in this table. Note that a null string is not a valid community name (i.e., a null string forces 'tmsCommonComm2ViewRowStatus' to 'notReady(3)')." ::= { tmsCommonCommunityToViewEntry 2 } tmsCommonComm2ViewViewName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 'internet':all } At runtime (i.e., not when this object is SET), this view name is compared to the 'vacmViewTreeFamilyViewName' in the 'vacmViewTreeFamilyTable' (see RFC2575). If a match is found and the varbind(s) specify valid object type and instance, the 'tmsCommonComm2ViewPermission' privilege is permitted. Note that a null string is not a valid view name value. Also note that the value of this object does not have to match an existing entry in the 'vacmViewTreeFamilyTable' (if no match, no access is allowed). Note that the factory default value for this object is 'internet', which allows access to the subtree under '1.3.6.1'." ::= { tmsCommonCommunityToViewEntry 3 } tmsCommonComm2ViewPermission OBJECT-TYPE SYNTAX INTEGER { readOnly(1), readWrite(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { readWrite:all } This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite(2)' allows both GET and SET operations." ::= { tmsCommonCommunityToViewEntry 4 } tmsCommonComm2ViewRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - supplied in a single SNMP PDU or have default values) or the 'createAndWait(5)' action states. Until all parameters are valid for a conceptual row, this object is 'notReady(3)'. All parameters must be valid before this object can be set to 'active(1)'. Any object in a conceptual row can be modified independent of the value of this object (e.g., can be changed while 'active(1)')." ::= { tmsCommonCommunityToViewEntry 5 } ------------------------------------------------------------------------------ -- -- tmsCommonIgmpSnoop - IGMP Snooping Parameters -- -- This group is used to instrument the Layer 2 IGMP Snooping support. -- ------------------------------------------------------------------------------ -- tmsCommonIgmpSnoopEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { false ) Setting this object to true(1) enables IGMP Snooping. Setting it to false(2) disables IGMP Snooping. Note that IGMP Snooping can function with or without GVRP and GMRP enabled." ::= { tmsCommonIgmpSnoop 1 } tmsCommonIgmpSnoopAlerts OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { false ) Setting this object to true(1) enables the IP Router Alert Option (as defined in RFC2113) for transmitted IGMP packets. Setting it to false(2) disables this option." ::= { tmsCommonIgmpSnoop 2 } tmsCommonIgmpSnoopAging OBJECT-TYPE SYNTAX Integer32 (30..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 300 ) The timeout period in seconds for aging out Multicast Groups dynamically learned with IGMP Snooping. Note that aging operates on a per interface per VLAN per multicast group basis." ::= { tmsCommonIgmpSnoop 3 } tmsCommonIgmpSnoopTable OBJECT-TYPE SYNTAX SEQUENCE OF TmsCommonIgmpSnoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table, which provides IGMP Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674)." ::= { tmsCommonIgmpSnoop 4 } tmsCommonIgmpSnoopEntry OBJECT-TYPE SYNTAX TmsCommonIgmpSnoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Displays by VLAN, Multicast Group, and Multicast receive port the set of ports enabled to forward Multicast Group traffic as determined by the IGMP Snooping task." AUGMENTS { dot1qStaticMulticastEntry } ::= { tmsCommonIgmpSnoopTable 1 } TmsCommonIgmpSnoopEntry ::= SEQUENCE { tmsCommonIgmpSnoopEgressPorts PortList } tmsCommonIgmpSnoopEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object displays the set of ports enabled to forward specific Multicast Group traffic as determined by the IGMP Snooping task. It should be noted that the IGMP Snooping task generates a pseudo- static (i.e., not saved in NVM) port list similar to the RFC2674 Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently, a port will not be a member of 'tmsCommonIgmpSnoopEgressPorts' if it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'." ::= { tmsCommonIgmpSnoopEntry 1 } ------------------------------------------------------------------------------ -- conformance information ------------------------------------------------------------------------------ -- -------------------------------------------------------------------------- -- units of conformance -- -------------------------------------------------------------------------- tmsCommonVerGroup OBJECT-GROUP OBJECTS { tmsCommonVerMIBMajor, tmsCommonVerMIBMinor, tmsCommonVerBootSWMajor, tmsCommonVerBootSWMinor, tmsCommonVerAppSWMajor, tmsCommonVerAppSWMinor } STATUS current DESCRIPTION "This group retrieves system component versions." ::= { tmsCommonGroups 1 } tmsCommonIPGroup OBJECT-GROUP OBJECTS { tmsCommonIPMACAddr, tmsCommonIPIpAddress, tmsCommonIPGateAddress, tmsCommonIPNetMask, tmsCommonIPStatus } STATUS current DESCRIPTION "This group configures and retrieves IP related objects." ::= { tmsCommonGroups 2 } tmsCommonLoadGroup OBJECT-GROUP OBJECTS { tmsCommonLoadTftpAddress, tmsCommonLoadTftpFileName, tmsCommonLoadType, tmsCommonLoadExecute, tmsCommonLoadExecuteStatus } STATUS current DESCRIPTION "This group configures and retrieves TFTP download and upload objects." ::= { tmsCommonGroups 3 } tmsCommonMiscGroup OBJECT-GROUP OBJECTS { tmsCommonMiscSaveToNvm, tmsCommonMiscSpanOnOff, tmsCommonMiscBOOTPOnOff, tmsCommonMiscDHCPOnOff, tmsCommonMiscBaud, tmsCommonMiscPassword, tmsCommonMiscProductName, tmsCommonMiscReset, tmsCommonMiscTrapTest } STATUS current DESCRIPTION "This group configures and retrieves misc. switch objects." ::= { tmsCommonGroups 4 } tmsCommonCommToViewGroup OBJECT-GROUP OBJECTS { tmsCommonComm2ViewCommName, tmsCommonComm2ViewViewName, tmsCommonComm2ViewPermission, tmsCommonComm2ViewRowStatus } STATUS current DESCRIPTION "This group configures and retrieves community-to-view SNMP information." ::= { tmsCommonGroups 5 } tmsCommonIgmpSnoopGroup OBJECT-GROUP OBJECTS { tmsCommonIgmpSnoopEnabled, tmsCommonIgmpSnoopAlerts, tmsCommonIgmpSnoopAging, tmsCommonIgmpSnoopEgressPorts } STATUS current DESCRIPTION "This group configures and retrieves IGMP Snooping information." ::= { tmsCommonGroups 6 } -- -------------------------------------------------------------------------- -- compliance statements -- -------------------------------------------------------------------------- tmsCommonCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement." MODULE -- this module MANDATORY-GROUPS { tmsCommonVerGroup, tmsCommonIPGroup, tmsCommonLoadGroup, tmsCommonMiscGroup, tmsCommonCommToViewGroup, tmsCommonIgmpSnoopGroup } ::= { tmsCommonCompliances 1 } ------------------------------------------------------------------------------ -- -- Sample TMS Common MIB Enterprise Trap -- -- This trap facilitates testing of SNMP traps. It can also be used as -- an example for developers of custom enterprise MIBs. -- ------------------------------------------------------------------------------ -- tmsCommonSnmpV2TestTrap NOTIFICATION-TYPE OBJECTS { tmsCommonMiscProductName } STATUS current DESCRIPTION "This trap is used for the sample SNMP enterprise trap in the 'tmsCommonMiscTrapTest' object. Note that it includes the 'tmsCommonMiscProductName' object as a varbind." ::= { tmsCommonNotify 1 } -- -- END of TMS-COMMON-MIB -- END