Description: The value of tmnxPtpClockRecoveryState indicates the state of the clock recovery process on a PTP system. The various states are: notApplicable (0) - The system is not attempting to recover a clock initial (1) - The system is configured to recover a clock, but not enough information has yet been received to adjust the local clock to match a master clock acquiring (2) - The system has enough information to attempt clock recovery, and has started the process of adjusting its local clock frequency to match the master clock phaseTracking (3) - The system has adjusted its local clock to the approximate frequency of the master clock, and is adjusting the local clock to minimize the phase difference between the two clocks locked (4) - The system is locked to the chosen master clock and the phase error between the master clock and the local clock is relatively small holdover (5) - The system has stopped receiving useful information from the chosen master clock, and is maintaining the last estimated frequency for its local clock