TIMETRA-PTP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Counter32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, RowStatus, TimeStamp, TruthValue, RowPointer, DateAndTime FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB timetraSRMIBModules, tmnxSRObjs, tmnxSRNotifyPrefix, tmnxSRConfs FROM TIMETRA-GLOBAL-MIB tmnxChassisNotifyChassisId, tmnxChassisNotifyHwIndex, tmnxCpmCardEntry, tmnxCpmCardOscillatorType FROM TIMETRA-CHASSIS-MIB TmnxPortEncapType FROM TIMETRA-PORT-MIB TmnxAdminState, TmnxOperState, TItemDescription, TmnxPortID, TmnxEncapVal FROM TIMETRA-TC-MIB vRtrID, vRtrIfEntry FROM TIMETRA-VRTR-MIB ; timetraPtpMIBModule MODULE-IDENTITY LAST-UPDATED "201102010000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Alcatel-Lucent SROS Support Web: http://support.alcatel-lucent.com" DESCRIPTION "This document is the SNMP MIB module to manage and provision the Precision Time Protocol (PTP) components of the Alcatel-Lucent SROS device as defined in the IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems (IEEE Std 1588-2008). Copyright (c) 2011-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "201102010000Z" DESCRIPTION "Rev 1.0 1 Feb 2011 00:00 Initial release of the TIMETRA-PTP-MIB." ::= { timetraSRMIBModules 74 } tmnxPtp1588Objs OBJECT IDENTIFIER ::= { tmnxSRObjs 74 } tmnxPtp1588NotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 74 } tmnxPtp1588Conformance OBJECT IDENTIFIER ::= { tmnxSRConfs 74 } -- Object Groups in the Alcatel-Lucent PTP 1588 MIB Module tmnxPtp1588ConfigTimeStamps OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 1 } tmnxPtp1588Configurations OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 2 } tmnxPtp1588Status OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 3 } tmnxPtp1588Statistics OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 5 } tmnxPtp1588NotifyObjects OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 10 } -- Notification Groups in the Alcatel-Lucent PTP 1588 MIB Module tmnxPtp1588Notifications OBJECT IDENTIFIER ::= { tmnxPtp1588NotifyPrefix 0 } -- Compliance Groups in the Alcatel-Lucent PTP 1588 MIB Module tmnxPtp1588Compliances OBJECT IDENTIFIER ::= { tmnxPtp1588Conformance 1 } tmnxPtp1588Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Conformance 2 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Textual Conventions -- TmnxPtpClockType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpClockType specifies the type of clock of the network element: ordinarySlave (1) - The system is always a slave clock in the master-slave hierarchy. The system derives its timing from one or more master clocks in the network. ordinaryMaster (2) - The system is a grandmaster clock in the master-slave hierarchy. The system provides timing to multiple slave clocks in the network. boundary (3) - The system is a boundary clock, which may be anywhere in the master-slave clock hierarchy. It can obtain timing from a master clock, and provide timing to multiple slave clocks." REFERENCE "IEEE Std 1588-2008 Section 6.5" SYNTAX INTEGER { ordinarySlave (1), ordinaryMaster (2), boundary (3) } TmnxPtpClockIdentity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpClockIdentity specifies the unique identifier used to identify a network element participating in the Precision Time Protocol (PTP)." REFERENCE "IEEE Std 1588-2008 Section 7.5.2.2" SYNTAX OCTET STRING (SIZE (8)) TmnxPtpClockClass ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpClockClass specifies the traceability of the time or frequency distributed by the grandmaster clock." REFERENCE "IEEE Std 1588-2008 Section 7.6.2.4" SYNTAX Unsigned32 (0..255) TmnxPtpDomain ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpDomain specifies the Precision Time Protocol (PTP) domain. The value 0 specifies the default domain for IEEE1588-2008. The value 4 specifies the default domain for ITU-T G.8265.1 specification." REFERENCE "IEEE Std 1588-2008 Section 7.1 and ITU-T G.8265.1, draft V0.3, section 6.7.2" SYNTAX Unsigned32 (0..255) TmnxPtpPriority ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Precision Time Protocol (PTP) priority used both for the value to advertise in the Announce messages and for the local clock value in data set comparisons. It is used by the Best Master Clock Algorithm to determine which clock should provide timing for the network. The priority is rated highest (0) to lowest (255)." REFERENCE "IEEE Std 1588-2008 Section 7.6.2.2 and 7.6.2.3" SYNTAX Unsigned32 (0..255) TmnxPtpProfile ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Precision Time Protocol (PTP) profile specifies the standard to which PTP conforms. g8265dot1-2010 - conforms to the PTP profile specified in the ITU-T G.8265.1 specification ieee1588-2008 - conforms to the default PTP profile specified in the IEEE 1588-2008 standard." REFERENCE "IEEE Std 1588-2008 and ITU-T draft G.8265.1" SYNTAX INTEGER { g8265dot1-2010 (1), ieee1588-2008 (2) } TmnxPtpDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpDirection specifies which direction packets are travelling in the system: rx - Packets are being received by the system. tx - Packets are being transmitted from the system." SYNTAX INTEGER { rx (1), tx (2) } TmnxPtpLogInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpLogInterval specifies an interval between PTP packets, or equivalently, a packet rate. It is specified as the logarithm to the base 2 of the interval in seconds. For example, -7 specifies a packet rate of 128 packets per second, and +4 specifies a packet rate of 1 packet every 16 seconds." SYNTAX Integer32 (-7..4) TmnxPtpClockStepType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpClockStepType specifies the clock step: unknown (0) - It is unknown whether the clock is a one-step or two-step clock. No announce messages have been received from the remote clock. oneStep (1) - The Clock provides time information using a single event message. twoStep (2) - The Clock provides time information using the combination of an event message and a subsequent general message." REFERENCE "IEEE Std 1588-2008 Sections 3.1.21 and 3.1.47" SYNTAX INTEGER { unknown (0), oneStep (1), twoStep (2) } TmnxPtpClockAccuracy ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpClockAccuracy specifies the mean of the time frequency error between the clock under test and a perfect reference clock, over an ensemble of measurements." REFERENCE "IEEE Std 1588-2008 Section 7.6.2.5" SYNTAX Unsigned32 (0..255) TmnxPtpClockVariance ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpClockVariance is a measure of the precision of a clock. The value 65535 indicates that the variance is either too large to be represented or has not been computed." REFERENCE "IEEE Std 1588-2008 Section 7.6.3" SYNTAX Unsigned32 (0..65535) TmnxPtpPortState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpPortState indicates the operational state of a PTP port." REFERENCE "IEEE Std 1588-2008 Section 9.2.5" SYNTAX INTEGER { notApplicable (0), initializing (1), faulty (2), disabled (3), listening (4), preMaster (5), master (6), passive (7), uncalibrated (8), slave (9) } TmnxPtpPortNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpPortNumber specifies a number which identifies a logical access point of a clock for PTP communications to the communications network. A PTP ordinary clock has exactly one PTP port, with port number 1. A PTP boundary clock has multiple ports, each with unique port numbers." REFERENCE "IEEE 1588-2008, Section 3.1.35, 7.5.2.3" SYNTAX Unsigned32 (0..65534) TmnxPtpTimeStampReferencePoint ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxPtpTimeStampReferencePoint indicates the reference point where a PTP event packet is timestamped in the SROS system: unknown (0) - The reference point for the PTP timestamp has not yet been determined. port (1) - The PTP packet's timestamp was taken at the physical port, between the MAC and the PHY. This corresponds to reference point 'A' in IEEE 1588-2008, Figure 14. cpm (2) - The PTP packet's timestamp was taken in software in the operating system kernel on the CPM card. This corresponds to reference point 'B' in IEEE 1588-2008, Figure 14." REFERENCE "IEEE Std 1588-2008 Section 6.6.5" SYNTAX INTEGER { unknown (0), port (1), cpm (2) } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Global Configuration Objects -- tmnxPtpClockConfig OBJECT IDENTIFIER ::= { tmnxPtp1588Configurations 1 } tmnxPtpClockAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockAdminState specifies whether PTP 1588 is enabled on the system or not." DEFVAL { outOfService } ::= { tmnxPtpClockConfig 1 } tmnxPtpClockClockType OBJECT-TYPE SYNTAX TmnxPtpClockType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockClockType specifies the clock behavior of PTP1588 on the system. This object can only be modified if tmnxPtpClockAdminState is set to 'outOfService (3)', otherwise an 'inconsistentValue' error is returned." DEFVAL { ordinarySlave } ::= { tmnxPtpClockConfig 2 } tmnxPtpClockProfile OBJECT-TYPE SYNTAX TmnxPtpProfile MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockProfile specifies the conformance of the PTP system to either the default IEEE 1588-2008 behavior, or the ITU-T profile. Modification of this object indirectly resets the value of tmnxPtpClockDomain to the corresponding default value for the specified profile. This object can only be modified if tmnxPtpClockAdminState is set to 'outOfService (3)', otherwise an 'inconsistentValue' error is returned." DEFVAL { g8265dot1-2010 } ::= { tmnxPtpClockConfig 3 } tmnxPtpClockDomain OBJECT-TYPE SYNTAX TmnxPtpDomain MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockDomain specifies the domain in which PTP 1588 runs on the system. This object can only be modified if tmnxPtpClockAdminState is set to 'outOfService (3)', otherwise an 'inconsistentValue' error is returned." DEFVAL { 4 } ::= { tmnxPtpClockConfig 4 } tmnxPtpClockAnnounceInterval OBJECT-TYPE SYNTAX TmnxPtpLogInterval (-3..4) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockAnnounceInterval specifies the packet rate requested in REQUEST_UNICAST_TRANSMISSION signaling messages for announce packets. This object can only be modified if tmnxPtpClockAdminState is set to 'outOfService (3)', otherwise an 'inconsistentValue' error is returned." REFERENCE "ITU-T draft G.8265.1 V0.3, Section 6.5" DEFVAL { 1 } ::= { tmnxPtpClockConfig 5 } tmnxPtpClockPriority1 OBJECT-TYPE SYNTAX TmnxPtpPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockPriority1 specifies the value of the defaultDS.priority1 data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE Std 1588-2008, Sections 7.6.2.2, and 8.2.1.4.1" DEFVAL { 128 } ::= { tmnxPtpClockConfig 6 } tmnxPtpClockPriority2 OBJECT-TYPE SYNTAX TmnxPtpPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockPriority2 specifies the value of the defaultDS.priority2 data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE Std 1588-2008, Sections 7.6.2.3, and 8.2.1.4.2" DEFVAL { 128 } ::= { tmnxPtpClockConfig 7 } tmnxPtpClockWaitToRestore OBJECT-TYPE SYNTAX Unsigned32 (0|1..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockWaitToRestore specifies the time to wait after an Announce Receipt Timeout expires before considering further announce messages from a peer for the purposes of selecting a master clock. The value zero (0), specifies no wait time. This object can only be modified if tmnxPtpClockAdminState is set to 'outOfService (3)', otherwise an 'inconsistentValue' error is returned." REFERENCE "ITU-T draft G.8265.1 V0.3, Section 6.8.2" DEFVAL { 0 } ::= { tmnxPtpClockConfig 8 } tmnxPtpClockNetworkType OBJECT-TYPE SYNTAX INTEGER { sonet (1), sdh (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxPtpClockNetworkType specifies whether the SROS is configured to use PTP clock classes corresponding to SONET or SDH quality levels." REFERENCE "ITU-T draft G.8265.1 V0.3, Section 6.7.3.2" DEFVAL { sdh } ::= { tmnxPtpClockConfig 9 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Global Status/Operational Objects -- tmnxPtpClockOperTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxPtpClockOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpClockOperTable contains the operational information for the individual Precision Timing Protocol (PTP) for each CPM card in the SROS system." ::= { tmnxPtp1588Status 1 } tmnxPtpClockOperEntry OBJECT-TYPE SYNTAX TmnxPtpClockOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpClockOperEntry consists of the operational information for the PTP clock on an individual CPM card." AUGMENTS { tmnxCpmCardEntry } ::= { tmnxPtpClockOperTable 1 } TmnxPtpClockOperEntry ::= SEQUENCE { tmnxPtpClockIdentity TmnxPtpClockIdentity, tmnxPtpClockOperState TmnxOperState, tmnxPtpClockStepType TmnxPtpClockStepType, tmnxPtpClockClass TmnxPtpClockClass, tmnxPtpClockAccuracy TmnxPtpClockAccuracy, tmnxPtpClockVariance TmnxPtpClockVariance, tmnxPtpClockPortState TmnxPtpPortState, tmnxPtpClockPortStateLastChanged TimeStamp, tmnxPtpClockRecoveryState INTEGER, tmnxPtpClockRecoveryStateLastChg TimeStamp, tmnxPtpClockFrequencyOffset Integer32 } tmnxPtpClockIdentity OBJECT-TYPE SYNTAX TmnxPtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockIdentity indicates the identify of the local Clock. This object corresponds to the value of the defaultDS.clockIdentity data set member defined by IEEE Std 1588-2008. The clock identity is derived from tmnxChassisBaseMacAddress." ::= { tmnxPtpClockOperEntry 1 } tmnxPtpClockOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockOperState indicates the operational state of PTP 1588 on the system." ::= { tmnxPtpClockOperEntry 2 } tmnxPtpClockStepType OBJECT-TYPE SYNTAX TmnxPtpClockStepType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockStepType indicates how the system provides timing information. SROS systems always have a tmnxPtpClockStepType of 'oneStep (1)', and never transmit PTP 'follow up' packets." ::= { tmnxPtpClockOperEntry 3 } tmnxPtpClockClass OBJECT-TYPE SYNTAX TmnxPtpClockClass MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockClass indicates the local clock class. The value of this object corresponds to the defaultDS.clockQuality data set member defined in IEEE Std 1588-2008. When tmnxPtpClockClockType is 'ordinarySlave (1)', tmnxPtpClockClass is 'slaveOnly (255)'. Otherwise, when tmnxPtpClockProfile is 'ieee1588-2008 (2)' tmnxPtpClockClass is 'default (248)'. When tmnxPtpClockProfile is 'g8265dot1-2010 (1)', tmnxPtpClockClass changes depending on the value of tmnxSyncIfTimingSystemQltyLevel. The mapping between ITU-T synchronization quality levels and PTP clock class is given in ITU-T recommendation G.8265.1." REFERENCE "IEEE Std 1588-2008, Section 8.2.1.3.1.1 and ITU-T draft G.8265.1 V0.3, Section 6.7.3.2." ::= { tmnxPtpClockOperEntry 4 } tmnxPtpClockAccuracy OBJECT-TYPE SYNTAX TmnxPtpClockAccuracy MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockAccuracy indicates the accuracy of the clock. The value of this object corresponds to the defaultDS.clockQuality.clockAccuracy data set member defined in IEEE Std 1588-2008. For SROS systems, this is always reported as 254 (0xFE), meaning 'Unknown'." REFERENCE "IEEE Std 1588-2008, Section 8.2.1.3.1.2" ::= { tmnxPtpClockOperEntry 5 } tmnxPtpClockVariance OBJECT-TYPE SYNTAX TmnxPtpClockVariance MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockVariance indicates the inherent precision of the local clock. The value of this object corresponds to the defaultDS.clockQuality.clockVariance data set member defined in IEEE Std 1588-2008." ::= { tmnxPtpClockOperEntry 6 } tmnxPtpClockPortState OBJECT-TYPE SYNTAX TmnxPtpPortState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockPortState indicates the current state of the single PTP port when tmnxPtpClockClockType is either 'ordinarySlave (1)' or 'ordinaryMaster (2)'. Otherwise, tmnxPtpClockPortState is 'notApplicable (0)'. The value of this object corresponds to the portDS.portState data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE Std 1588-2008 Section 9.2.5" ::= { tmnxPtpClockOperEntry 7 } tmnxPtpClockPortStateLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockPortStateLastChanged indicates the time, since system startup, when the tmnxPtpClockPortState last changed state." ::= { tmnxPtpClockOperEntry 8 } tmnxPtpClockRecoveryState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), initial (1), acquiring (2), phaseTracking (3), holdover (4), locked (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecoveryState indicates the state of the clock recovery process on a PTP system. The various states are: notApplicable (0) - The system is not attempting to recover a clock initial (1) - The system is configured to recover a clock, but not enough information has yet been received to adjust the local clock to match a master clock acquiring (2) - The system has enough information to attempt clock recovery, and has started the process of adjusting its local clock frequency to match the master clock phaseTracking (3) - The system has adjusted its local clock to the approximate frequency of the master clock, and is adjusting the local clock to minimize the phase difference between the two clocks locked (4) - The system is locked to the chosen master clock and the phase error between the master clock and the local clock is relatively small holdover (5) - The system has stopped receiving useful information from the chosen master clock, and is maintaining the last estimated frequency for its local clock" ::= { tmnxPtpClockOperEntry 9 } tmnxPtpClockRecoveryStateLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecoveryStateLastChg indicates the time, since system startup, when tmnxPtpClockRecoveryState last changed state." ::= { tmnxPtpClockOperEntry 10 } tmnxPtpClockFrequencyOffset OBJECT-TYPE SYNTAX Integer32 UNITS "parts per trillion" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockFrequencyOffset indicates the frequency offset of the recovered clock, from the nominal clock rate, in parts per trillion. Positive values indicate that the recovered clock is faster than nominal, and negative values indicate that the recovered clock is slower than nominal." REFERENCE "IEEE Std 1588-2008 Section 3.1.12" ::= { tmnxPtpClockOperEntry 11 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Global Master Clock Configuration Objects -- --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Global Master Clock Status/Operational Objects -- tmnxPtpMasterClockOper OBJECT IDENTIFIER ::= { tmnxPtp1588Status 2 } tmnxPtpMasterClockAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockAddressType indicates, along with the value of tmnxPtpMasterClockAddress, the IP address of the Parent Clock. tmnxPtpMasterClockAddressType must be set to 'ipv4 (1)'" ::= { tmnxPtpMasterClockOper 1 } tmnxPtpMasterClockAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockAddress indicates, along with the value of tmnxPtpMasterClockAddressType, the IP address of the Parent Clock. If tmnxPtpMasterClockAddressType and tmnxPtpMasterClockAddress specify an IPv4 address of 0.0.0.0, this indicates that the local clock is currently the parent/master clock." ::= { tmnxPtpMasterClockOper 2 } tmnxPtpMasterClockGMClockId OBJECT-TYPE SYNTAX TmnxPtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockGMClockId indicates the Grand Master Clock Identity for the Master Clock. This corresponds to the parentDS.grandmasterIdentity data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE 1588-2008, Section 8.2.3.6" ::= { tmnxPtpMasterClockOper 3 } tmnxPtpMasterClockGMClockPrio1 OBJECT-TYPE SYNTAX TmnxPtpPriority MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockGMClockPrio1 indicates the priority1 set by the Grandmaster clock. The value of this object corresponds to the parentDS.grandmasterPriority1 data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE 1588-2008, Section 8.2.3.8" ::= { tmnxPtpMasterClockOper 4 } tmnxPtpMasterClockGMClockPrio2 OBJECT-TYPE SYNTAX TmnxPtpPriority MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockGMClockPrio2 indicates the priority2 set by the Grandmaster clock. The value of this object corresponds to the parentDS.grandmasterPriority2 data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE 1588-2008, Section 8.2.3.9" ::= { tmnxPtpMasterClockOper 5 } tmnxPtpMasterClockGMClockClass OBJECT-TYPE SYNTAX TmnxPtpClockClass MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockGMClockClass indicates the grand master clock class. The value of this object corresponds to the parentDS.grandMasterClockQuality.clockClass data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE 1588-2008, Section 8.2.3.7" ::= { tmnxPtpMasterClockOper 6 } tmnxPtpMasterClockGMAccuracy OBJECT-TYPE SYNTAX TmnxPtpClockAccuracy MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockGMAccuracy indicates the accuracy of the Grand Master clock. The value of this object corresponds to the parentDS.grandMasterClockQuality.clockAccuracy data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE 1588-2008, Section 8.2.3.7" ::= { tmnxPtpMasterClockOper 7 } tmnxPtpMasterClockGMVariance OBJECT-TYPE SYNTAX TmnxPtpClockVariance MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockGMVariance indicates the variance of the Grand Master clock time. The value of this object corresponds to the parentDS.grandMasterClockQuality.offsetScaledLogVariance data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE 1588-2008, Section 8.2.3.7" ::= { tmnxPtpMasterClockOper 8 } tmnxPtpMasterClockParentClockId OBJECT-TYPE SYNTAX TmnxPtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockParentClockId indicates the clock identity of the Master Clock's Parent. The value of this object corresponds to the parentDS.parentPortIdentity.clockIdentity data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE 1588-2008, Section 8.2.3.2" ::= { tmnxPtpMasterClockOper 9 } tmnxPtpMasterClockParentPortNum OBJECT-TYPE SYNTAX TmnxPtpPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpMasterClockParentPortNum indicates the identifying port number used by the remote peer when communicating with the local clock. The value of this object corresponds to the parentDS.parentPortIdentity.portNumber data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE Std 1588-2008 Section 8.2.3.2" ::= { tmnxPtpMasterClockOper 10 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Per Peer Clock Configuration Objects -- tmnxPtpPeerConfigTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerConfigTblLastChanged indicates the time, since system startup, when the tmnxPtpPeerConfigTable last changed state." ::= { tmnxPtp1588ConfigTimeStamps 1 } tmnxPtpPeerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxPtpPeerConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpPeerConfigTable consists of peer configuration information." ::= { tmnxPtp1588Configurations 3 } tmnxPtpPeerConfigEntry OBJECT-TYPE SYNTAX TmnxPtpPeerConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpPeerConfigEntry contains information pertaining to an individual PTP 1588 peer. Individual PTP peers are identified by the IP address of the peer PTP clock. If tmnxPtpClockClockType is 'ordinarySlave (1)', entries may be created and deleted via SNMP set operations using tmnxPtpPeerRowStatus. The tmnxPtpPeerRemoteMaster attribute will be created with a value of 'true', and the tmnxPtpPeerRemoteSlave attribute will be created with a value of 'false'. Neither or these attributes may be subsequently changed. These entries correspond to PTP grandmaster or boundary clocks providing timing information to the local clock. In order to delete an entry, tmnxPtpPeerAdminState must first be set to 'outOfService (3)'. If tmnxPtpClockClockType is 'ordinaryMaster (2)', entries are automatically created upon receipt of PTP signaling packets requesting unicast transmission of PTP packets. Entries cannot be created or deleted via SNMP set operations. These entries correspond to PTP slave boundary clocks receiving timing information from the local clock. These entries are created by the system with tmnxPtpPeerRemoteMaster set to 'false' and tmnxPtpPeerRemoteSlave set to 'true'. If tmnxPtpClockClockType is 'boundary (3)', entries corresponding to grandmaster or boundary PTP clocks providing timing to the local clock may be created and deleted via SNMP set operations, in the same manner as when tmnxPtpClockClockType is 'ordinarySlave (1)'. As well, entries corresponding to slave or boundary PTP clocks receiving timing from the local clock may be automatically created by the system, in the same manner as when tmnxPtpClockClockType is 'ordinaryMaster (2)'. For an individual entry, the value of tmnxPtpPeerRemoteMaster along with tmnxPtpPeerRemoteSlave indicates the direction of flow of timing information between the local PTP clock and the peer PTP clock. There are three cases: 1) If tmnxPtpPeerRemoteMaster is 'true', and tmnxPtpPeerRemoteSlave is 'false', the peer PTP clock is providing timing to the local PTP clock. In this case, PTP Announce, Sync, and Delay Reponse packets are sent from the peer PTP clock to the local PTP clock, and PTP Delay Request packets are sent from the local PTP clock to the peer PTP clock. This type of PTP peer may exist when tmnxPtpClockClockType is either 'ordinarySlave (1)' or boundary (3)'. 2) If tmnxPtpPeerRemoteMaster is 'false', and tmnxPtpPeerRemoteSlave is 'true', the local PTP clock is providing timing to the peer PTP clock. In this case, PTP Announce, Sync, and Delay Reponse packets are sent from the local PTP clock to the peer PTP clock, and PTP Delay Request packets are sent from the peer PTP clock to the local PTP clock. This type of PTP peer may exist when tmnxPtpClockClockType is either 'ordinaryMaster (2)' or boundary (3)'. 3) If tmnxPtpPeerRemoteMaster and tmnxPtpPeerRemoteSlave are both set to 'true', the local clock and remote PTP clock have a peer relationship. Timing information may flow in either direction, depending on the decision of the PTP Best Master Clock Algorithm running on each PTP clock. This type of PTP peer may only exist when tmnxPtpClockClockType is 'boundary (3)'. When tmnxPtpClockClockType is 'boundary (3)', a peer entry may be changed from one that is only receiving timing from the local clock, to one that may either receive or provide timing, by setting tmnxPtpPeerRemoteMaster to 'true'." INDEX { vRtrID, tmnxPtpPeerIpAddrType, tmnxPtpPeerIpAddress } ::= { tmnxPtpPeerConfigTable 1 } TmnxPtpPeerConfigEntry ::= SEQUENCE { tmnxPtpPeerIpAddrType InetAddressType, tmnxPtpPeerIpAddress InetAddress, tmnxPtpPeerRowStatus RowStatus, tmnxPtpPeerLastChanged TimeStamp, tmnxPtpPeerAdminState TmnxAdminState, tmnxPtpPeerPortState TmnxPtpPortState, tmnxPtpPeerLocalPriority TmnxPtpPriority, tmnxPtpPeerRemoteMaster TruthValue, tmnxPtpPeerRemoteSlave TruthValue, tmnxPtpPeerClockId TmnxPtpClockIdentity, tmnxPtpPeerLocalPortNumber TmnxPtpPortNumber, tmnxPtpPeerRemotePortNumber TmnxPtpPortNumber, tmnxPtpPeerTxTimeStampPoint TmnxPtpTimeStampReferencePoint, tmnxPtpPeerLastTxPortId TmnxPortID, tmnxPtpPeerLastTxPortEncapType TmnxPortEncapType, tmnxPtpPeerLastTxPortEncapValue TmnxEncapVal, tmnxPtpPeerRxTimeStampPoint TmnxPtpTimeStampReferencePoint, tmnxPtpPeerLastRxPortId TmnxPortID, tmnxPtpPeerLastRxPortEncapType TmnxPortEncapType, tmnxPtpPeerLastRxPortEncapValue TmnxEncapVal } tmnxPtpPeerIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxPtpPeerIpAddrType specifies the type of address of the PTP 1588 peer. This object represents the first index in the table." ::= { tmnxPtpPeerConfigEntry 1 } tmnxPtpPeerIpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxPtpPeerIpAddress specifies the address of the PTP 1588 peer. This object represents the second index in the table." ::= { tmnxPtpPeerConfigEntry 2 } tmnxPtpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxPtpPeerRowStatus specifies the row status of the PTP 1588 peer. This object controls the creation and deletion of peer PTP grandmaster and boundary clocks that may provide timing to the local PTP clock. These PTP peers may only be created when tmnxPtpClockClockType is set to 'ordinarySlave (1)' or 'boundary (3)'. For these peers, tmnxPtpPeerRemoteMaster will be set to 'true'. Before deleting one of these PTP peers, tmnxPtpPeerAdminState must be set to 'outOfService (3)'. Peers that correspond to slave or boundary PTP clocks that may receive timing information from the local clock can not be created or deleted by the use of this object. Instead, they are dynamically created by the system through the operation of the Precision Time Protocol." ::= { tmnxPtpPeerConfigEntry 3 } tmnxPtpPeerLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerLastChanged indicates the time, since system startup, that the PTP 1588 peer was created or modified." ::= { tmnxPtpPeerConfigEntry 4 } tmnxPtpPeerAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxPtpPeerAdminState specifies the administrative state of the PTP 1588 peer, that is, whether or not the peer will be used by the Precision Time Protocol (PTP)." DEFVAL { inService } ::= { tmnxPtpPeerConfigEntry 5 } tmnxPtpPeerPortState OBJECT-TYPE SYNTAX TmnxPtpPortState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPortState indicates the current state of the PTP port used when communicating with the remote peer. If tmnxPtpClockClockType is either 'ordinarySlave (1)' or 'ordinaryMaster (2)', the value of tmnxPtpPeerPortState is the same as tmnxPtpClockPortState. The value of this object corresponds to the portDS.portState data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE Std 1588-2008 Section 8.2.5.3.1" ::= { tmnxPtpPeerConfigEntry 6 } tmnxPtpPeerLocalPriority OBJECT-TYPE SYNTAX TmnxPtpPriority MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxPtpPeerLocalPriority specifies the local priority used to choose between PTP masters in the Best Master Clock Algorithm (BMCA). This object is only relevant when tmnxPtpClockProfile is set to 'g8265dot1-2010 (1)'. The parameter is ignored otherwise." REFERENCE "ITU-T draft G.8265.1 V0.3, Section 6.7.2" DEFVAL { 128 } ::= { tmnxPtpPeerConfigEntry 7 } tmnxPtpPeerRemoteMaster OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxPtpPeerRemoteMaster indicates whether or not the peer is configured as a remote grandmaster or boundary clock that may provide timing information to the local clock. If tmnxPtpClockClockType is 'ordinarySlave (1)', all entries in this table will have tmnxPtpPeerRemoteMaster set to 'true', and it cannot be changed. If tmnxPtpClockClockType is 'ordinaryMaster (2)', all entries in this table will have tmnxPtpPeerRemoteMaster set to 'false', and it cannot be changed. If tmnxPtpClockClockType is 'boundary (3)', there may be entries in this table with tmnxPtpPeerRemoteMaster set to 'false', indicating that the local clock is only providing timing information to the remote PTP peer. This peer may be changed to one that may either receive or provide timing, by setting tmnxPtpPeerRemoteMaster to 'true'. When the value of this object is 'true', a corresponding row in the tmnxPtpPeerMasterStatusTable will exist for this peer." ::= { tmnxPtpPeerConfigEntry 8 } tmnxPtpPeerRemoteSlave OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerRemoteSlave specifies whether or not the peer is acting as a remote slave or boundary clock that may be receiving timing information from the local clock. Remote slave clocks are learned by the local clock upon reception of PTP signaling packets, and cannot be configured via SNMP set operations. If tmnxPtpPeerRemoteSlave is 'true', it indicates that the local PTP clock may provide timing information to the PTP peer. If tmnxPtpClockClockType is 'ordinarySlave (1)', all entries in this table will have tmnxPtpPeerRemoteSlave set to 'false'. If tmnxPtpClockClockType is 'ordinaryMaster (2)', all entries in this table will have tmnxPtpPeerRemoteSlave set to 'true'." ::= { tmnxPtpPeerConfigEntry 9 } tmnxPtpPeerClockId OBJECT-TYPE SYNTAX TmnxPtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerClockId indicates the clock identity of the peer." ::= { tmnxPtpPeerConfigEntry 10 } tmnxPtpPeerLocalPortNumber OBJECT-TYPE SYNTAX TmnxPtpPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerLocalPortNumber indicates the PTP port number assigned by the local clock and used when communicating with the remote clock. If tmnxPtpClockClockType is either 'ordinarySlave (1)' or 'ordinaryMaster (2)', tmnxPtpPeerLocalPortNumber has a value of 1. The value of this object corresponds to the portDS.portIdentity.portNumber data set member defined in IEEE Std 1588-2008." REFERENCE "IEEE Std 1588-2008 Section 7.5.2" ::= { tmnxPtpPeerConfigEntry 11 } tmnxPtpPeerRemotePortNumber OBJECT-TYPE SYNTAX TmnxPtpPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerRemotePortNumber indicates the PTP port number used by the remote peer when communicating with the local clock." REFERENCE "IEEE Std 1588-2008 Section 7.5.2.3" ::= { tmnxPtpPeerConfigEntry 12 } tmnxPtpPeerTxTimeStampPoint OBJECT-TYPE SYNTAX TmnxPtpTimeStampReferencePoint MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerTxTimeStampPoint indicates the reference point used to generate the PTP timestamp for the last transmitted PTP event packet. If no event packets have been transmitted, the value is 'unknown(0)'. If PTP event packets are transmitted out an interface with tmnxPtpVRtrIfAdminState set to 'inService(2)', the value is 'port(1)'. If PTP event packets are transmitted out an interface with tmnxPtpVRtrIfAdminState set to 'outOfService(3)', the value is 'cpm(2)'." ::= { tmnxPtpPeerConfigEntry 13 } tmnxPtpPeerLastTxPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerLastTxPortId along with tmnxPtpPeerLastTxPortEncapType and tmnxPtpPeerLastTxPortEncapValue indicates the last port used to transmit PTP packets to the PTP peer. If no packets have been transmitted, tmnxPtpPeerLastTxPortId contains the 'invalid portid' value of 0x1e000000." ::= { tmnxPtpPeerConfigEntry 14 } tmnxPtpPeerLastTxPortEncapType OBJECT-TYPE SYNTAX TmnxPortEncapType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerLastTxPortEncapType along with tmnxPtpPeerLastTxPortId and tmnxPtpPeerLastTxPortEncapValue indicates the last port used to transmit PTP packets to the PTP peer." ::= { tmnxPtpPeerConfigEntry 15 } tmnxPtpPeerLastTxPortEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerLastTxPortEncapValue along with tmnxPtpPeerLastTxPortId and tmnxPtpPeerLastTxPortEncapType indicates the last port used to transmit PTP packets to the PTP peer." ::= { tmnxPtpPeerConfigEntry 16 } tmnxPtpPeerRxTimeStampPoint OBJECT-TYPE SYNTAX TmnxPtpTimeStampReferencePoint MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerRxTimeStampPoint indicates the reference point used to generate the PTP timestamp for the last received PTP event packet. If no event packets have been received, the value is 'unknown(0)'. If PTP event packets are received on an interface with tmnxPtpVRtrIfAdminState set to 'inService(2)', and the destination IP address of the received packet is either the local IPv4 address of the interface or the PTP system IPv4 address, the value is 'port(1)'. Otherwise, the value is 'cpm(2)'." ::= { tmnxPtpPeerConfigEntry 17 } tmnxPtpPeerLastRxPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerLastRxPortId along with tmnxPtpPeerLastRxPortEncapType and tmnxPtpPeerLastRxPortEncapValue indicates the last port used to receive PTP packets from the PTP peer. If no packets have been received, tmnxPtpPeerLastRxPortId contains the 'invalid portid' value of 0x1e000000." ::= { tmnxPtpPeerConfigEntry 18 } tmnxPtpPeerLastRxPortEncapType OBJECT-TYPE SYNTAX TmnxPortEncapType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerLastRxPortEncapType along with tmnxPtpPeerLastRxPortId and tmnxPtpPeerLastRxPortEncapValue indicates the last port used to receive PTP packets from the PTP peer." ::= { tmnxPtpPeerConfigEntry 19 } tmnxPtpPeerLastRxPortEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerLastRxPortEncapValue along with tmnxPtpPeerLastRxPortId and tmnxPtpPeerLastRxPortEncapType indicates the last port used to receive PTP packets from the PTP peer." ::= { tmnxPtpPeerConfigEntry 20 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Per Peer Master Clock Configuration/Operational Objects -- tmnxPtpPeerMasterStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxPtpPeerMasterStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpPeerMasterStatusTable consists of Precision Time Protocol Master Peer state information. This table extends the tmnxPtpPeerConfigTable for peers configured as grandmaster or boundary PTP clocks that may provide timing information to the local clock." ::= { tmnxPtp1588Status 3 } tmnxPtpPeerMasterStatusEntry OBJECT-TYPE SYNTAX TmnxPtpPeerMasterStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpPeerMasterStatusEntry contains the information pertaining to Precision Time Protocol peers configured as master clocks. Rows in this table are created and destroyed by the system based on the configuration in the associated tmnxPtpPeerConfigEntry. All peers in this table have tmnxPtpPeerRemoteMaster set to 'true'." INDEX { vRtrID, tmnxPtpPeerIpAddrType, tmnxPtpPeerIpAddress } ::= { tmnxPtpPeerMasterStatusTable 1 } TmnxPtpPeerMasterStatusEntry ::= SEQUENCE { tmnxPtpPeerMasterCurrentMaster TruthValue, tmnxPtpPeerMasterClockStepType TmnxPtpClockStepType, tmnxPtpPeerMasterClockStepsRemvd Unsigned32, tmnxPtpPeerMasterGMClockId TmnxPtpClockIdentity, tmnxPtpPeerMasterGMClockPrio1 TmnxPtpPriority, tmnxPtpPeerMasterGMClockPrio2 TmnxPtpPriority, tmnxPtpPeerMasterGMClockClass TmnxPtpClockClass, tmnxPtpPeerMasterGMClockAccuracy TmnxPtpClockAccuracy, tmnxPtpPeerMasterGMClockVariance TmnxPtpClockVariance, tmnxPtpPeerMasterWaitUntilRestr Unsigned32, tmnxPtpPeerMasterAlarm BITS } tmnxPtpPeerMasterCurrentMaster OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterCurrentMaster indicates whether or not this PTP Peer has been chosen by the PTP Best Master Clock Algorithm as the current parent clock." ::= { tmnxPtpPeerMasterStatusEntry 1 } tmnxPtpPeerMasterClockStepType OBJECT-TYPE SYNTAX TmnxPtpClockStepType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterClockStepType indicates the step type of the PTP peer." ::= { tmnxPtpPeerMasterStatusEntry 2 } tmnxPtpPeerMasterClockStepsRemvd OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterClockStepsRemvd indicates the number of steps the master is removed from the grandmaster clock. This value is taken from the last announce packet received from the peer clock." REFERENCE "IEEE Std 1588-2008 Section 13.5.2.7" ::= { tmnxPtpPeerMasterStatusEntry 3 } tmnxPtpPeerMasterGMClockId OBJECT-TYPE SYNTAX TmnxPtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterGMClockId indicates the identity of the grandmaster PTP clock. This value is taken from the last Announce packet received from the peer clock." ::= { tmnxPtpPeerMasterStatusEntry 4 } tmnxPtpPeerMasterGMClockPrio1 OBJECT-TYPE SYNTAX TmnxPtpPriority MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterGMClockPrio1 indicates the 'priority1' value of the grandmaster clock. This value is taken from the last announce packet received from the peer clock." ::= { tmnxPtpPeerMasterStatusEntry 5 } tmnxPtpPeerMasterGMClockPrio2 OBJECT-TYPE SYNTAX TmnxPtpPriority MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterGMClockPrio2 indicates the 'priority2' value of the grandmaster clock. This value is taken from the last announce packet received from the peer clock." ::= { tmnxPtpPeerMasterStatusEntry 6 } tmnxPtpPeerMasterGMClockClass OBJECT-TYPE SYNTAX TmnxPtpClockClass MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterGMClockClass indicates the clock class of the grandmaster clock. This value is taken from the last announce packet received from the peer clock." ::= { tmnxPtpPeerMasterStatusEntry 7 } tmnxPtpPeerMasterGMClockAccuracy OBJECT-TYPE SYNTAX TmnxPtpClockAccuracy MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterGMClockAccuracy indicates the clock accuracy of the grandmaster clock. This value is taken from the last announce packet received from the peer clock." ::= { tmnxPtpPeerMasterStatusEntry 8 } tmnxPtpPeerMasterGMClockVariance OBJECT-TYPE SYNTAX TmnxPtpClockVariance MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterGMClockVariance indicates the clock variance of the grandmaster clock. This value is taken from the last announce packet received from the peer clock." ::= { tmnxPtpPeerMasterStatusEntry 9 } tmnxPtpPeerMasterWaitUntilRestr OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterWaitUntilRestr indicates the remaining time until PTP 1588 can consider an Announce message from a peer for the purposes of Best Master Clock Algorithm (BMCA)." ::= { tmnxPtpPeerMasterStatusEntry 10 } tmnxPtpPeerMasterAlarm OBJECT-TYPE SYNTAX BITS { ptsfLossAnnounce (0), ptsfLossSync (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerMasterAlarm indicates the alarm status of the PTP peer clock: ptsfLossAnnounce(0) The peer is in the 'Packet Timing Signal Fail (Loss Announce)' state, indicating that it is not receiving PTP announce messages from the remote master. The ptsfLossAnnounce bit is set if no PTP announce messages are received for a duration equal to ANNOUNCE_RECEIPT_TIMEOUT seconds, as described in G.8251.1, section 6.7.3.3. The ptsfLossAnnounce bit is cleared if a PTP announce message is received from the remote master. ptsfLossSync(1) The peer is in the 'Packet Timing Signal Fail (Loss Sync)' state, indicating that it is not receiving PTP timing messages from the remote master. The ptsfLossSync bit is set if no PTP timing messages are received from the remote master for a specific duration. The duration to enter the ptsfLossSync state is the same as the duration for the ptsfLossAnnounce state. The ptsfLossSync bit is cleared when PTP timing messages are received from the remote master. These bits will only be set when tmnxPtpClockClockType is 'ordinarySlave (1)'. They do not apply when tmnxPtpClockClockType is 'ordinaryMaster (2)' or 'boundary (3)'." REFERENCE "ITU-T G.8265.1, section 6.7.3.3." ::= { tmnxPtpPeerMasterStatusEntry 11 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Peer Unicast Status Table -- tmnxPtpPeerUnicastTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxPtpPeerUnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpPeerUnicastTable consists of the status of unicast messaging service between the local PTP clock and all other PTP clocks." ::= { tmnxPtp1588Status 4 } tmnxPtpPeerUnicastEntry OBJECT-TYPE SYNTAX TmnxPtpPeerUnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpPeerUnicastEntry contains the status of unicast messaging service between PTP clocks for the specified packet type in the direction specified. Rows in this table are created and destroyed by the system based on the existence of rows in the tmnxPtpPeerConfigTable, and based on the transfer of unicast negotiation signaling TLVs between the PTP clocks." REFERENCE "IEEE Std 1588-2008 Section 16.1." INDEX { vRtrID, tmnxPtpPeerIpAddrType, tmnxPtpPeerIpAddress, tmnxPtpPeerUnicastDirection, tmnxPtpPeerUnicastPktType } ::= { tmnxPtpPeerUnicastTable 1 } TmnxPtpPeerUnicastEntry ::= SEQUENCE { tmnxPtpPeerUnicastDirection TmnxPtpDirection, tmnxPtpPeerUnicastPktType INTEGER, tmnxPtpPeerUnicastStatus INTEGER, tmnxPtpPeerUnicastRate TmnxPtpLogInterval, tmnxPtpPeerUnicastDuration Unsigned32, tmnxPtpPeerUnicastEventTime TimeStamp } tmnxPtpPeerUnicastDirection OBJECT-TYPE SYNTAX TmnxPtpDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxPtpPeerUnicastDirection specifies the direction of packet flow for tmnxPtpPeerUnicastPktType packets (announce, sync, or delay response). Ordinary slave clocks will only have entries in tmnxPtpPeerUnicastTable with a tmnxPtpPeerUnicastDirection of 'rx (1)'. Ordinary master clocks will only have entries with a tmnxPtpPeerUnicastDirection of 'tx (2)'. Boundary clocks may have entries in both directions." ::= { tmnxPtpPeerUnicastEntry 1 } tmnxPtpPeerUnicastPktType OBJECT-TYPE SYNTAX INTEGER { announce (1), sync (2), delayResponse (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxPtpPeerUnicastPktType specifies the packet type described by the values in this table entry." ::= { tmnxPtpPeerUnicastEntry 2 } tmnxPtpPeerUnicastStatus OBJECT-TYPE SYNTAX INTEGER { pending (1), granted (2), denied (3), expired (4), canceled (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerUnicastStatus indicates: pending (1) - a request for unicast transmission has been sent to the master, but no reply has been received. granted (2) - the packet rate and duration has been accepted by the master clock denied (3) - the packet rate and/or duration has been denied by the master clock expired (4) - the unicast transmission duration has expired without being renewed canceled (5) - unicast transmission has been canceled by either the local or remote clock" ::= { tmnxPtpPeerUnicastEntry 3 } tmnxPtpPeerUnicastRate OBJECT-TYPE SYNTAX TmnxPtpLogInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerUnicastRate indicates the packet rate requested or granted for unicast transmission between the PTP peers." ::= { tmnxPtpPeerUnicastEntry 4 } tmnxPtpPeerUnicastDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerUnicastDuration indicates the duration, in seconds, requested or granted for unicast transmission between the PTP peers." ::= { tmnxPtpPeerUnicastEntry 5 } tmnxPtpPeerUnicastEventTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerUnicastEventTime indicates the time, since system startup, that tmnxPtpPeerUnicastStatus last changed or the unicast session between the PTP clocks was renewed." ::= { tmnxPtpPeerUnicastEntry 6 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Time Information Objects -- tmnxPtpTimeInformation OBJECT IDENTIFIER ::= { tmnxPtp1588Status 5 } tmnxPtpTimeInfoTimescale OBJECT-TYPE SYNTAX INTEGER { ptp (1), arbitrary (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpTimeInfoTimescale indicates the time scale of the time reported by PTP." REFERENCE "IEEE 1588-2008, sections 7.2 and 8.2.4.8." ::= { tmnxPtpTimeInformation 1 } tmnxPtpTimeInfoCurrentTime OBJECT-TYPE SYNTAX DateAndTime (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpTimeInfoCurrentTime contains the date and time. If tmnxPtpTimeInfoTimescale is 'ptp (1)', the time is converted to UTC time, based on the current offset between UTC and PTP time." REFERENCE "IEEE 1588-2008, sections 7.2 and 8.2.4.8." ::= { tmnxPtpTimeInformation 2 } tmnxPtpTimeInfoFreqTraceable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpTimeInfoFreqTraceable indicates whether the frequency of time is traceable to a primary reference. This corresponds to the 'frequencyTraceable' member of the 'time properties' data set." REFERENCE "IEEE 1588-2008, section 8.2.4.7." ::= { tmnxPtpTimeInformation 3 } tmnxPtpTimeInfoTimeTraceable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpTimeInfoTimeTraceable indicates whether the time is traceable to a primary reference. This corresponds to the 'timeTraceable' member of the 'time properties' data set." REFERENCE "IEEE 1588-2008, section 8.2.4.6." ::= { tmnxPtpTimeInformation 4 } tmnxPtpTimeInfoTimeSource OBJECT-TYPE SYNTAX INTEGER { atomicClock (16), gps (32), terrestrialRadio (48), ptp (64), ntp (80), handSet (96), other (144), internalOscillator (160), reserved (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpTimeInfoTimeSource indicates the source of time used by the grandmaster clock. This correponds to the 'timeSource' member of the 'time properties' data set." REFERENCE "IEEE 1588-2008, sections 7.6.2.6 and 8.2.4.9." ::= { tmnxPtpTimeInformation 5 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Statistics Objects -- tmnxPtpClockPacketStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxPtpClockPacketStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpClockPacketStatsTable consists of the packet statistics associated with the Precision Time Protocol (PTP)." ::= { tmnxPtp1588Statistics 1 } tmnxPtpClockPacketStatsEntry OBJECT-TYPE SYNTAX TmnxPtpClockPacketStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpClockPacketStatsEntry contain the directional packet statistics for the Precision Time Protocol (PTP). Rows are created and destroyed by the system." INDEX { tmnxPtpClkPktStatsDirection } ::= { tmnxPtpClockPacketStatsTable 1 } TmnxPtpClockPacketStatsEntry ::= SEQUENCE { tmnxPtpClkPktStatsDirection TmnxPtpDirection, tmnxPtpClkPktStatsAnnounce Counter32, tmnxPtpClkPktStatsSync Counter32, tmnxPtpClkPktStatsFollowUp Counter32, tmnxPtpClkPktStatsDelayRequest Counter32, tmnxPtpClkPktStatsDelayResp Counter32, tmnxPtpClkPktStatsSignaling Counter32, tmnxPtpClkPktStatsOther Counter32, tmnxPtpClkPktStatsUniReqAnno Counter32, tmnxPtpClkPktStatsUniReqSync Counter32, tmnxPtpClkPktStatsUniReqDelayRsp Counter32, tmnxPtpClkPktStatsUniGrantAnno Counter32, tmnxPtpClkPktStatsUniGrantSync Counter32, tmnxPtpClkPktStatsUniGrantDelRsp Counter32, tmnxPtpClkPktStatsUniDenyAnno Counter32, tmnxPtpClkPktStatsUniDenySync Counter32, tmnxPtpClkPktStatsUniDenyDelRsp Counter32, tmnxPtpClkPktStatsUniCancelAnno Counter32, tmnxPtpClkPktStatsUniCancelSync Counter32, tmnxPtpClkPktStatsUniCancelDelay Counter32, tmnxPtpClkPktStatsUniAckCnclAnno Counter32, tmnxPtpClkPktStatsUniAckCnclSync Counter32, tmnxPtpClkPktStatsUniAckCnclDly Counter32, tmnxPtpClkPktStatsOtherTLVs Counter32, tmnxPtpClkPktStatsDropBadDomain Counter32, tmnxPtpClkPktStatsDropAltMaster Counter32, tmnxPtpClkPktStatsDropOther Counter32, tmnxPtpClkPktStatsTimeStampPort Counter32, tmnxPtpClkPktStatsTimeStampCpm Counter32 } tmnxPtpClkPktStatsDirection OBJECT-TYPE SYNTAX TmnxPtpDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsDirection specifies which direction the packet statistics for the particular row are accumulated." ::= { tmnxPtpClockPacketStatsEntry 1 } tmnxPtpClkPktStatsAnnounce OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsAnnounce indicates the accumulated packet statistics for PTP Announce messages." ::= { tmnxPtpClockPacketStatsEntry 2 } tmnxPtpClkPktStatsSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsSync indicates the accumulated packet statistics for PTP Sync messages." ::= { tmnxPtpClockPacketStatsEntry 3 } tmnxPtpClkPktStatsFollowUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsFollowUp indicates the accumulated packet statistics for PTP Follow Up messages." ::= { tmnxPtpClockPacketStatsEntry 4 } tmnxPtpClkPktStatsDelayRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsDelayRequest indicates the accumulated packet statistics for PTP Delay Request messages." ::= { tmnxPtpClockPacketStatsEntry 5 } tmnxPtpClkPktStatsDelayResp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsDelayResp indicates the accumulated packet statistics for PTP Delay Response messages." ::= { tmnxPtpClockPacketStatsEntry 6 } tmnxPtpClkPktStatsSignaling OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsSignaling indicates the accumulated packet statistics for PTP signaling messages." ::= { tmnxPtpClockPacketStatsEntry 7 } tmnxPtpClkPktStatsOther OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsOther indicates the accumulated packet statistics for all other PTP messages. This object is accumulated in the 'rx' direction only." ::= { tmnxPtpClockPacketStatsEntry 8 } tmnxPtpClkPktStatsUniReqAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniReqAnno indicates the accumulated packet statistics for Unicast Request Announce TLVs." ::= { tmnxPtpClockPacketStatsEntry 9 } tmnxPtpClkPktStatsUniReqSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniReqSync indicates the accumulated packet statistics for Unicast Request Sync TLVs." ::= { tmnxPtpClockPacketStatsEntry 10 } tmnxPtpClkPktStatsUniReqDelayRsp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniReqDelayRsp indicates the accumulated packet statistics for Unicast Request Delay Response TLVs." ::= { tmnxPtpClockPacketStatsEntry 11 } tmnxPtpClkPktStatsUniGrantAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniGrantAnno indicates the accumulated packet statistics for Unicast Grant Announce TLVs, where the request was granted. The request was granted if the duration indicated in the TLV was non-zero." ::= { tmnxPtpClockPacketStatsEntry 12 } tmnxPtpClkPktStatsUniGrantSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniGrantSync indicates the accumulated packet statistics for Unicast Grant Sync TLVs, where the request was granted. The request was granted if the duration indicated in the TLV was non-zero." ::= { tmnxPtpClockPacketStatsEntry 13 } tmnxPtpClkPktStatsUniGrantDelRsp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniGrantDelRsp indicates the accumulated packet statistics for Unicast Grant Delay Response TLVs, where the request was granted. The request was granted if the duration indicated in the TLV was non-zero." ::= { tmnxPtpClockPacketStatsEntry 14 } tmnxPtpClkPktStatsUniDenyAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniDenyAnno indicates the accumulated packet statistics for Unicast Grant Announce TLVs, where the request was denied. The request was denied if the duration indicated in the TLV was zero." ::= { tmnxPtpClockPacketStatsEntry 15 } tmnxPtpClkPktStatsUniDenySync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniDenySync indicates the accumulated packet statistics for Unicast Grant Sync TLVs, where the request was denied. The request was denied if the duration indicated in the TLV was zero." ::= { tmnxPtpClockPacketStatsEntry 16 } tmnxPtpClkPktStatsUniDenyDelRsp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniDenyDelRsp indicates the accumulated packet statistics for Unicast Grant Delay Response TLVs, where the request was denied. The request was denied if the duration indicated in the TLV was zero." ::= { tmnxPtpClockPacketStatsEntry 17 } tmnxPtpClkPktStatsUniCancelAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniCancelAnno indicates the accumulated packet statistics for Unicast Cancel Announce TLVs." ::= { tmnxPtpClockPacketStatsEntry 18 } tmnxPtpClkPktStatsUniCancelSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniCancelSync indicates the accumulated packet statistics for Unicast Cancel Sync TLVs." ::= { tmnxPtpClockPacketStatsEntry 19 } tmnxPtpClkPktStatsUniCancelDelay OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniCancelDelay indicates the accumulated packet statistics for Unicast Cancel Delay TLVs." ::= { tmnxPtpClockPacketStatsEntry 20 } tmnxPtpClkPktStatsUniAckCnclAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniAckCnclAnno indicates the accumulated packet statistics for Unicast Acknowledge Cancel Announce TLVs." ::= { tmnxPtpClockPacketStatsEntry 21 } tmnxPtpClkPktStatsUniAckCnclSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniAckCnclSync indicates the accumulated packet statistics for Unicast Acknowledge Cancel Sync TLVs." ::= { tmnxPtpClockPacketStatsEntry 22 } tmnxPtpClkPktStatsUniAckCnclDly OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsUniAckCnclDly indicates the accumulated packet statistics for Unicast Acknowledge Cancel Delay Response TLVs." ::= { tmnxPtpClockPacketStatsEntry 23 } tmnxPtpClkPktStatsOtherTLVs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsOtherTLVs indicates the accumulated packet statistics for other PTP TLV signaling messages. This object is accumulated for the 'rx' direction only." ::= { tmnxPtpClockPacketStatsEntry 24 } tmnxPtpClkPktStatsDropBadDomain OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsDropBadDomain indicates the accumulated packet statistics for PTP packets dropped because the PTP domain indicated in the packet does not match the configured PTP domain. This object is accumulated for the 'rx' direction only." ::= { tmnxPtpClockPacketStatsEntry 25 } tmnxPtpClkPktStatsDropAltMaster OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsDropAltMaster indicates the accumulated packet statistics for PTP packets dropped because the PTP header has the 'alternateMasterFlag' set. This object is accumulated for the 'rx' direction only." ::= { tmnxPtpClockPacketStatsEntry 26 } tmnxPtpClkPktStatsDropOther OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsDropOther indicates the accumulated packet statistics for PTP packets dropped and not counted in the 'tmnxPtpClkPktStatsDropBadDomain' and 'tmnxPtpClkPktStatsDropAltMaster' objects. This object is accumulated for the 'rx' direction only." ::= { tmnxPtpClockPacketStatsEntry 27 } tmnxPtpClkPktStatsTimeStampPort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsTimeStampPort indicates the accumulated packet statistics for PTP event packets where the timestamp point is at the physical layer." REFERENCE "IEEE 1588-2008, Figure 14, timestamp point 'A'." ::= { tmnxPtpClockPacketStatsEntry 28 } tmnxPtpClkPktStatsTimeStampCpm OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClkPktStatsTimeStampCpm indicates the accumulated packet statistics for PTP event packets where the timestamp point is at the operating system kernel." REFERENCE "IEEE 1588-2008, Figure 14, timestamp point 'B'." ::= { tmnxPtpClockPacketStatsEntry 29 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Clock Peer Packet Statistics Objects -- tmnxPtpPeerPacketStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxPtpPeerPacketStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpPeerPacketStatsTable consists of the per peer packet statistics associated with the Precision Time Protocol (PTP)." ::= { tmnxPtp1588Statistics 2 } tmnxPtpPeerPacketStatsEntry OBJECT-TYPE SYNTAX TmnxPtpPeerPacketStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpPeerPacketStatsEntry contain the directional packet statistics for the Precision Time Protocol (PTP). Rows are created and destroyed by the system." INDEX { vRtrID, tmnxPtpPeerIpAddrType, tmnxPtpPeerIpAddress, tmnxPtpPeerPktStatDirection } ::= { tmnxPtpPeerPacketStatsTable 1 } TmnxPtpPeerPacketStatsEntry ::= SEQUENCE { tmnxPtpPeerPktStatDirection TmnxPtpDirection, tmnxPtpPeerPktStatAnnounce Counter32, tmnxPtpPeerPktStatSync Counter32, tmnxPtpPeerPktStatFollowUp Counter32, tmnxPtpPeerPktStatDelayRequest Counter32, tmnxPtpPeerPktStatDelayResp Counter32, tmnxPtpPeerPktStatSignaling Counter32, tmnxPtpPeerPktStatOther Counter32, tmnxPtpPeerPktStatUniReqAnno Counter32, tmnxPtpPeerPktStatUniReqSync Counter32, tmnxPtpPeerPktStatUniReqDelayRsp Counter32, tmnxPtpPeerPktStatUniGrantAnno Counter32, tmnxPtpPeerPktStatUniGrantSync Counter32, tmnxPtpPeerPktStatUniGrantDelRsp Counter32, tmnxPtpPeerPktStatUniDenyAnno Counter32, tmnxPtpPeerPktStatUniDenySync Counter32, tmnxPtpPeerPktStatUniDenyDelRsp Counter32, tmnxPtpPeerPktStatUniCancelAnno Counter32, tmnxPtpPeerPktStatUniCancelSync Counter32, tmnxPtpPeerPktStatUniCancelDelay Counter32, tmnxPtpPeerPktStatUniAckCnclAnno Counter32, tmnxPtpPeerPktStatUniAckCnclSync Counter32, tmnxPtpPeerPktStatUniAckCnclDly Counter32, tmnxPtpPeerPktStatOtherTLVs Counter32, tmnxPtpPeerPktStatDropBadDomain Counter32, tmnxPtpPeerPktStatDropAltMaster Counter32, tmnxPtpPeerPktStatDropOther Counter32, tmnxPtpPeerPktStatTimeStampPort Counter32, tmnxPtpPeerPktStatTimeStampCpm Counter32 } tmnxPtpPeerPktStatDirection OBJECT-TYPE SYNTAX TmnxPtpDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatDirection specifies which direction the packet statistics for the particular row are accumulated." ::= { tmnxPtpPeerPacketStatsEntry 1 } tmnxPtpPeerPktStatAnnounce OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatAnnounce indicates the accumulated packet statistics for PTP Announce messages." ::= { tmnxPtpPeerPacketStatsEntry 2 } tmnxPtpPeerPktStatSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatSync indicates the accumulated packet statistics for PTP Sync messages." ::= { tmnxPtpPeerPacketStatsEntry 3 } tmnxPtpPeerPktStatFollowUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatFollowUp indicates the accumulated packet statistics for PTP Follow Up messages." ::= { tmnxPtpPeerPacketStatsEntry 4 } tmnxPtpPeerPktStatDelayRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatDelayRequest indicates the accumulated packet statistics for PTP Delay Request messages." ::= { tmnxPtpPeerPacketStatsEntry 5 } tmnxPtpPeerPktStatDelayResp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatDelayResp indicates the accumulated packet statistics for PTP Delay Response messages." ::= { tmnxPtpPeerPacketStatsEntry 6 } tmnxPtpPeerPktStatSignaling OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatSignaling indicates the accumulated packet statistics for PTP signaling messages." ::= { tmnxPtpPeerPacketStatsEntry 7 } tmnxPtpPeerPktStatOther OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatOther indicates the accumulated packet statistics for all other PTP messages. This object is accumulated in the 'rx' direction only." ::= { tmnxPtpPeerPacketStatsEntry 8 } tmnxPtpPeerPktStatUniReqAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniReqAnno indicates the accumulated packet statistics for Unicast Request Announce TLVs." ::= { tmnxPtpPeerPacketStatsEntry 9 } tmnxPtpPeerPktStatUniReqSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniReqSync indicates the accumulated packet statistics for Unicast Request Sync TLVs." ::= { tmnxPtpPeerPacketStatsEntry 10 } tmnxPtpPeerPktStatUniReqDelayRsp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniReqDelayRsp indicates the accumulated packet statistics for Unicast Request Delay Response TLVs." ::= { tmnxPtpPeerPacketStatsEntry 11 } tmnxPtpPeerPktStatUniGrantAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniGrantAnno indicates the accumulated packet statistics for Unicast Grant Announce TLVs, where the request was granted. The request was granted if the duration indicated in the TLV was non-zero." ::= { tmnxPtpPeerPacketStatsEntry 12 } tmnxPtpPeerPktStatUniGrantSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniGrantSync indicates the accumulated packet statistics for Unicast Grant Sync TLVs, where the request was granted. The request was granted if the duration indicated in the TLV was non-zero." ::= { tmnxPtpPeerPacketStatsEntry 13 } tmnxPtpPeerPktStatUniGrantDelRsp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniGrantDelRsp indicates the accumulated packet statistics for Unicast Grant Delay Response TLVs, where the request was granted. The request was granted if the duration indicated in the TLV was non-zero." ::= { tmnxPtpPeerPacketStatsEntry 14 } tmnxPtpPeerPktStatUniDenyAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniDenyAnno indicates the accumulated packet statistics for Unicast Grant Announce TLVs, where the request was denied. The requets was denied if the duration indicated in the TLV was zero." ::= { tmnxPtpPeerPacketStatsEntry 15 } tmnxPtpPeerPktStatUniDenySync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniDenySync indicates the accumulated packet statistics for Unicast Grant Sync TLVs, where the request was denied. The request was denied if the duration indicated in the TLV was zero." ::= { tmnxPtpPeerPacketStatsEntry 16 } tmnxPtpPeerPktStatUniDenyDelRsp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniDenyDelRsp indicates the accumulated packet statistics for Unicast Grant Delay Response TLVs, where the request was denied. The request was denied if the duration indicated in the TLV was zero." ::= { tmnxPtpPeerPacketStatsEntry 17 } tmnxPtpPeerPktStatUniCancelAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniCancelAnno indicates the accumulated packet statistics for Unicast Cancel Announce TLVs." ::= { tmnxPtpPeerPacketStatsEntry 18 } tmnxPtpPeerPktStatUniCancelSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniCancelSync indicates the accumulated packet statistics for Unicast Cancel Sync TLVs." ::= { tmnxPtpPeerPacketStatsEntry 19 } tmnxPtpPeerPktStatUniCancelDelay OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniCancelDelay indicates the accumulated packet statistics for Unicast Cancel Delay TLVs." ::= { tmnxPtpPeerPacketStatsEntry 20 } tmnxPtpPeerPktStatUniAckCnclAnno OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniAckCnclAnno indicates the accumulated packet statistics for Unicast Acknowledge Cancel Announce TLVs." ::= { tmnxPtpPeerPacketStatsEntry 21 } tmnxPtpPeerPktStatUniAckCnclSync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniAckCnclSync indicates the accumulated packet statistics for Unicast Acknowledge Cancel Sync TLVs." ::= { tmnxPtpPeerPacketStatsEntry 22 } tmnxPtpPeerPktStatUniAckCnclDly OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatUniAckCnclDly indicates the accumulated packet statistics for Unicast Acknowledge Cancel Delay Response TLVs." ::= { tmnxPtpPeerPacketStatsEntry 23 } tmnxPtpPeerPktStatOtherTLVs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatOtherTLVs indicates the accumulated packet statistics for other PTP TLV signaling messages. This object is accumulated for the 'rx' direction only." ::= { tmnxPtpPeerPacketStatsEntry 24 } tmnxPtpPeerPktStatDropBadDomain OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatDropBadDomain indicates the accumulated packet statistics for PTP packets dropped because the PTP domain indicated in the packet does not match the configured PTP domain. This object is accumulated for the 'rx' direction only." ::= { tmnxPtpPeerPacketStatsEntry 25 } tmnxPtpPeerPktStatDropAltMaster OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatDropAltMaster indicates the accumulated packet statistics for PTP packets dropped because the PTP header has the 'alternateMasterFlag' set. This object is accumulated for the 'rx' direction only." ::= { tmnxPtpPeerPacketStatsEntry 26 } tmnxPtpPeerPktStatDropOther OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatDropOther indicates the accumulated packet statistics for PTP packets dropped and not counted in the 'tmnxPtpPeerPktStatDropBadDomain' and 'tmnxPtpPeerPktStatDropAltMaster' objects. This object is accumulated for the 'rx' direction only." ::= { tmnxPtpPeerPacketStatsEntry 27 } tmnxPtpPeerPktStatTimeStampPort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatTimeStampPort indicates the accumulated packet statistics for PTP event packets where the timestamp point is at the physical layer." REFERENCE "IEEE 1588-2008, Figure 14, timestamp point 'A'." ::= { tmnxPtpPeerPacketStatsEntry 28 } tmnxPtpPeerPktStatTimeStampCpm OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpPeerPktStatTimeStampCpm indicates the accumulated packet statistics for PTP event packets where the timestamp point is at the operating system kernel." REFERENCE "IEEE 1588-2008, Figure 14, timestamp point 'B'." ::= { tmnxPtpPeerPacketStatsEntry 29 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Clock Recovery Statistics Objects -- tmnxPtpClockRecoveryStatistics OBJECT IDENTIFIER ::= { tmnxPtp1588Statistics 3 } tmnxPtpClockRecStatsInitial OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsInitial indicates the number of seconds that the clock recovery system has been in the initial state." ::= { tmnxPtpClockRecoveryStatistics 1 } tmnxPtpClockRecStatsAcquiring OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsAcquiring indicate the number of seconds that the clock recovery system has been in the acquiring state." ::= { tmnxPtpClockRecoveryStatistics 2 } tmnxPtpClockRecStatsPhaseTrack OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsPhaseTrack indicate the number of seconds that the clock recovery system has been in the phase tracking state." ::= { tmnxPtpClockRecoveryStatistics 3 } tmnxPtpClockRecStatsLocked OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsLocked indicate the number of seconds that the clock recovery system has been in the locked state." ::= { tmnxPtpClockRecoveryStatistics 4 } tmnxPtpClockRecStatsHoldover OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsHoldover indicate the number of seconds that the clock recovery system has been in the hold-over state." ::= { tmnxPtpClockRecoveryStatistics 5 } tmnxPtpClockRecStatsSyncPktLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsSyncPktLoss indicates the number of times that the clock recovery process detected packet loss in the sync packet flow from the best master clock." ::= { tmnxPtpClockRecoveryStatistics 6 } tmnxPtpClockRecStatsSyncHiPktLss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsSyncHiPktLss indicates the number of times that the clock recovery process detected a large amount of packet loss in the sync flow from the remote master clock. When this event occurs, the clock recovery process restarts." ::= { tmnxPtpClockRecoveryStatistics 7 } tmnxPtpClockRecStatsSyncStep OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsSyncStep indicates the number of times that the clock recovery process detected a large change in the amount of time taken for sync packets to be sent from the best master clock. This normally occurs if the route taken by packets from the best master changes." ::= { tmnxPtpClockRecoveryStatistics 8 } tmnxPtpClockRecStatsSyncHighPDV OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsSyncHighPDV indicates the number of times that the clock recovery process has determined that a sample of sync packets from the best master clock had too much packet delay variation to be useful in recovering the clock from the best master. When this event occurs, the entire sample of packets is not used in the clock recovery process." ::= { tmnxPtpClockRecoveryStatistics 9 } tmnxPtpClockRecStatsDlyPktLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsDlyPktLoss indicates the number of times that the clock recovery process detected packet loss in the delay request/response packet flow from the best master clock." ::= { tmnxPtpClockRecoveryStatistics 10 } tmnxPtpClockRecStatsDlyHiPktLss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsDlyHiPktLss indicates the number of times that the clock recovery process detected a large amount of packet loss in the delay request/response flow from the remote master clock. When this event occurs, the clock recovery process restarts." ::= { tmnxPtpClockRecoveryStatistics 11 } tmnxPtpClockRecStatsDlyStep OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsDlyStep indicates the number of times that the clock recovery process detected a large change in the amount of time taken for delay request packets to be sent to the best master clock. This normally occurs if the route taken by packets to the best master changes." ::= { tmnxPtpClockRecoveryStatistics 12 } tmnxPtpClockRecStatsDlyHighPDV OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpClockRecStatsDlyHighPDV indicates the number of times that the clock recovery process has determined that a sample of delay request packets to the best master clock had too much packet delay variation to be useful in recovering the clock from the best master. When this event occurs, the entire sample of packets is not used in the clock recovery process." ::= { tmnxPtpClockRecoveryStatistics 13 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Interface Configuration Objects -- tmnxPtpVRtrIfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxPtpVRtrIfTableLastChanged indicates the time, since system startup, when the tmnxPtpVRtrIfTable last changed state." ::= { tmnxPtp1588ConfigTimeStamps 2 } tmnxPtpVRtrIfTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxPtpVRtrIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxPtpVRtrIfTable table contains PTP configuration pertaining to IP interfaces." ::= { tmnxPtp1588Configurations 4 } tmnxPtpVRtrIfEntry OBJECT-TYPE SYNTAX TmnxPtpVRtrIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the PTP configuration corresponding to an interface configured in a virtual router. Entries are created and deleted when entries in the vRtrIfTable are created and deleted." AUGMENTS { vRtrIfEntry } ::= { tmnxPtpVRtrIfTable 1 } TmnxPtpVRtrIfEntry ::= SEQUENCE { tmnxPtpVRtrIfAdminState TmnxAdminState } tmnxPtpVRtrIfAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxPtpVRtrIfAdminState specifies the administrative state of the PTP hardware assist configuration of the interface. If the value is 'inService(2)', the timestamp point for PTP event packets is configured to be the physical layer. This corresponds to timestamp point 'A' in IEEE 1588-2008, Figure 14. If the value is 'outOfService(3)', the timestamp point for PTP event packets is configured to be the operating system kernel. This corresponds to timestamp point 'B' in IEEE 1588-2008, Figure 14. The value may only be configured to 'inService(2)' if all of the following are true: 1. An IPv4 address is configured against the interface. 2. An Ethernet physical port (or VLAN tag on an Ethernet physical port) has been associated with the interface. 3. The Ethernet port associated with the interface must not be configured for WAN mode. In other words, the tmnxPortEtherXGigMode attribute for the port must be either 'notApplicable' or 'lan'. 4. The MDA associated with the interface has synchronous Ethernet enabled. In other words, the tmnxMDASynchronousEthernet attribute for the MDA must be 'enabled'. 5. The port associated with the interface is on an IOM that supports the hardware assist configuration. 6. The port associated with the interface supports the hardware assist configuration. 7. The firmware currently in use by the active CPM support the hardware assist configuration. 8. The firmware currently in use by the IOM card supports the hardware assist configuration. After an upgrade from an older release, the IOM may continue using older firmware. A hard reset of the IOM is then needed to bring the IOM firmware up to date. 9. The firmware currently in use by the MDA supports the hardware assist configuration. After an upgrade from an older release, the MDA may continue using older firmware. A hard reset of the MDA or IOM is then needed to bring the MDA firmware up to date. If the physical port bound to the interface is removed, tmnxPtpVRtrIfAdminState is set to 'outOfService(3)'. If the IPv4 address assigned to the interface is removed, tmnxPtpVRtrIfAdminState is set to 'outOfService(3)'." REFERENCE "IEEE 1588-2008, section 6.5.5." ::= { tmnxPtpVRtrIfEntry 1 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Notification Objects -- tmnxPtpMasterClockLastIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxPtpMasterClockLastIpAddrType indicates the IP Address type of the last used IP Address reported in the tmnxPtpMasterClockChangedEvent. The value 'unknown (0)' indicates that there was no previous IP Address used by PTP for the Master Clock." ::= { tmnxPtp1588NotifyObjects 1 } tmnxPtpMasterClockLastIpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxPtpMasterClockLastIpAddress indicates the IP Address used of the last used IP Address reported in the tmnxPtpMasterClockChangedEvent. The NULL address indicates that there was no previous IP Address used by PTP for the Master Clock." ::= { tmnxPtp1588NotifyObjects 2 } tmnxPtpNotifyRowPointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxPtpNotifyRowPointer indicates a row in a table that has triggered a notification." ::= { tmnxPtp1588NotifyObjects 3 } tmnxPtpNotifyRowDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxPtpNotifyRowDescription indicates the description explaining the cause of the notification." ::= { tmnxPtp1588NotifyObjects 4 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Notifications -- tmnxPtpCardNotSupported NOTIFICATION-TYPE OBJECTS { tmnxCpmCardOscillatorType, tmnxPtpClockClockType, tmnxPtpClockAdminState } STATUS current DESCRIPTION "The tmnxPtpCardNotSupported notification is generated when the Precision Timing Protocol (PTP) is enabled on a card that is not capable of clock recovery using PTP. This notification is triggered when the TIMETRA-CHASSIS-MIB::tmnxCpmCardOscillatorType is not 'ocxo (3)', the tmnxPtpClockClockType is set to 'ordinarySlave (1)' or 'boundary (3)', and tmnxPtpClockAdminState is set to 'inService (2)'. [EFFECT] While this event is active, tmnxPtpClockOperState will be 'outOfService (3)' on the card that this notification was generated. [RECOVERY] This event is cleared when a replacement CPM card with an Oscillator of type 'ocxo (3)' is inserted. tmnxPtpCardNotSupportedClear is generated when this event is cleared." ::= { tmnxPtp1588Notifications 1 } tmnxPtpCardNotSupportedClear NOTIFICATION-TYPE OBJECTS { tmnxCpmCardOscillatorType, tmnxPtpClockClockType, tmnxPtpClockAdminState } STATUS current DESCRIPTION "The tmnxPtpCardNotSupportedClear notification is generated when the tmnxPtpCardNotSupported event is cleared for a particular CPM card." ::= { tmnxPtp1588Notifications 2 } tmnxPtpMasterClockChangedEvent NOTIFICATION-TYPE OBJECTS { tmnxPtpMasterClockAddressType, tmnxPtpMasterClockAddress, tmnxPtpMasterClockLastIpAddrType, tmnxPtpMasterClockLastIpAddress } STATUS current DESCRIPTION "The tmnxPtpMasterClockChangedEvent is generated when the Master/Parent Clock for the Precision Timing Protocol (PTP) changes on the system." ::= { tmnxPtp1588Notifications 3 } tmnxPtpClockRecoveryStateChange NOTIFICATION-TYPE OBJECTS { tmnxPtpClockRecoveryState } STATUS current DESCRIPTION "The tmnxPtpClockRecoveryStateChange is generated when the Precision Timing Protocol (PTP) clock recovery state changes on the system." ::= { tmnxPtp1588Notifications 4 } tmnxPtpOutOfResources NOTIFICATION-TYPE OBJECTS { tmnxChassisNotifyChassisId, tmnxChassisNotifyHwIndex } STATUS current DESCRIPTION "The tmnxPtpOutOfResources notification is generated when the Precision Timing Protocol (PTP) process on the card is out of resources. This may occur in either two situations: 1. The number of PTP peers exceeds the system limit. 2. The total unicast packet rate negotiated with all PTP peers has reached the maximum packet rate supported by the system. Exceeding this rate would impact the ability of the master clock to provide an accurate stream of timing packets to each remote slave clock. If either of the above two situation occurs, the PTP process will reject any new unicast packet requests from remote slave PTP peers. tmnxPtpOutOfResourcesClear is generated when this event is cleared." ::= { tmnxPtp1588Notifications 5 } tmnxPtpOutOfResourcesClear NOTIFICATION-TYPE OBJECTS { tmnxChassisNotifyChassisId, tmnxChassisNotifyHwIndex } STATUS current DESCRIPTION "The tmnxPtpOutOfResourcesClear notification is generated when both the total number of active PTP peers and the total negotiated unicast packet rate goes below 90% of the system limit." ::= { tmnxPtp1588Notifications 6 } tmnxPtpDynamicChange NOTIFICATION-TYPE OBJECTS { tmnxPtpNotifyRowPointer, tmnxPtpNotifyRowDescription } STATUS current DESCRIPTION "The tmnxPtpDynamicChange notification is generated when an object dynamically (i.e. not by configuration) changes state. This notification identifies the affected row." ::= { tmnxPtp1588Notifications 7 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Compliance Statements -- tmnxPtpCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for the management of the Precision Timing Protocol for Release 9.0 on SROS series systems." MODULE -- this module MANDATORY-GROUPS { tmnxPtpTimeStampGroup, tmnxPtpLocalConfigGroup, tmnxPtpLocalOperGroup, tmnxPtpMasterClockGroup, tmnxPtpPeerBaseConfigGroup, tmnxPtpPeerMasterStatusGroup, tmnxPtpPacketStatsGroup, tmnxPtpClockRecoveryGroup, tmnxPtpPeerUnicastStatusGroup, tmnxPtpNotificationsGroup } ::= { tmnxPtp1588Compliances 1 } tmnxPtpComplianceV10v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the management of the Precision Timing Protocol for Release 10.0 on SROS series systems." MODULE -- this module MANDATORY-GROUPS { tmnxPtpTimeStampGroup, tmnxPtpLocalConfigGroup, tmnxPtpLocalOperGroup, tmnxPtpMasterClockGroup, tmnxPtpPeerBaseConfigGroup, tmnxPtpPeerMasterStatusGroup, tmnxPtpPacketStatsGroup, tmnxPtpClockRecoveryGroup, tmnxPtpPeerUnicastStatusGroup, tmnxPtpNotificationsGroup, tmnxPtpVRtrIfTimeStampGroup, tmnxPtpVRtrIfConfigGroup, tmnxPtpTimeInfoGroup, tmnxPtpPeerOperGroup, tmnxPtpPacketStatsV10v0Group } ::= { tmnxPtp1588Compliances 2 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-PTP-MIB Group Statements -- tmnxPtpV9v0Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Groups 1 } tmnxPtpTimeStampGroup OBJECT-GROUP OBJECTS { tmnxPtpPeerConfigTblLastChanged } STATUS current DESCRIPTION "The group of objects maintaining table/row statistics for Precision Timing Protocol (PTP) on the SROS series system." ::= { tmnxPtpV9v0Groups 1 } tmnxPtpLocalConfigGroup OBJECT-GROUP OBJECTS { tmnxPtpClockAdminState, tmnxPtpClockClockType, tmnxPtpClockProfile, tmnxPtpClockDomain, tmnxPtpClockAnnounceInterval, tmnxPtpClockPriority1, tmnxPtpClockPriority2, tmnxPtpClockWaitToRestore, tmnxPtpClockNetworkType } STATUS current DESCRIPTION "The group of objects maintaining system configuration for the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 2 } tmnxPtpLocalOperGroup OBJECT-GROUP OBJECTS { tmnxPtpClockIdentity, tmnxPtpClockOperState, tmnxPtpClockStepType, tmnxPtpClockClass, tmnxPtpClockAccuracy, tmnxPtpClockVariance, tmnxPtpClockPortState, tmnxPtpClockPortStateLastChanged, tmnxPtpClockRecoveryState, tmnxPtpClockRecoveryStateLastChg, tmnxPtpClockFrequencyOffset } STATUS current DESCRIPTION "The group of objects indicating system operational states for the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 3 } tmnxPtpMasterClockGroup OBJECT-GROUP OBJECTS { tmnxPtpMasterClockAddressType, tmnxPtpMasterClockAddress, tmnxPtpMasterClockGMClockId, tmnxPtpMasterClockGMClockPrio1, tmnxPtpMasterClockGMClockPrio2, tmnxPtpMasterClockGMClockClass, tmnxPtpMasterClockGMAccuracy, tmnxPtpMasterClockGMVariance, tmnxPtpMasterClockParentClockId, tmnxPtpMasterClockParentPortNum } STATUS current DESCRIPTION "The group of objects indicating system operational states for the Master Clock for the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 4 } tmnxPtpPeerBaseConfigGroup OBJECT-GROUP OBJECTS { tmnxPtpPeerRowStatus, tmnxPtpPeerLastChanged, tmnxPtpPeerAdminState, tmnxPtpPeerPortState, tmnxPtpPeerLocalPriority, tmnxPtpPeerRemoteMaster, tmnxPtpPeerRemoteSlave, tmnxPtpPeerClockId, tmnxPtpPeerLocalPortNumber, tmnxPtpPeerRemotePortNumber } STATUS current DESCRIPTION "The group of objects maintaining Peer configuration for the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 5 } tmnxPtpPeerMasterStatusGroup OBJECT-GROUP OBJECTS { tmnxPtpPeerMasterCurrentMaster, tmnxPtpPeerMasterClockStepType, tmnxPtpPeerMasterClockStepsRemvd, tmnxPtpPeerMasterGMClockId, tmnxPtpPeerMasterGMClockPrio1, tmnxPtpPeerMasterGMClockPrio2, tmnxPtpPeerMasterGMClockClass, tmnxPtpPeerMasterGMClockAccuracy, tmnxPtpPeerMasterGMClockVariance, tmnxPtpPeerMasterWaitUntilRestr, tmnxPtpPeerMasterAlarm } STATUS current DESCRIPTION "The group of objects indicating operational states for Master Peers for the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 6 } tmnxPtpPacketStatsGroup OBJECT-GROUP OBJECTS { tmnxPtpClkPktStatsAnnounce, tmnxPtpClkPktStatsSync, tmnxPtpClkPktStatsFollowUp, tmnxPtpClkPktStatsDelayRequest, tmnxPtpClkPktStatsDelayResp, tmnxPtpClkPktStatsSignaling, tmnxPtpClkPktStatsOther, tmnxPtpClkPktStatsUniReqAnno, tmnxPtpClkPktStatsUniReqSync, tmnxPtpClkPktStatsUniReqDelayRsp, tmnxPtpClkPktStatsUniGrantAnno, tmnxPtpClkPktStatsUniGrantSync, tmnxPtpClkPktStatsUniGrantDelRsp, tmnxPtpClkPktStatsUniDenyAnno, tmnxPtpClkPktStatsUniDenySync, tmnxPtpClkPktStatsUniDenyDelRsp, tmnxPtpClkPktStatsUniCancelAnno, tmnxPtpClkPktStatsUniCancelSync, tmnxPtpClkPktStatsUniCancelDelay, tmnxPtpClkPktStatsUniAckCnclAnno, tmnxPtpClkPktStatsUniAckCnclSync, tmnxPtpClkPktStatsUniAckCnclDly, tmnxPtpClkPktStatsOtherTLVs, tmnxPtpClkPktStatsDropBadDomain, tmnxPtpClkPktStatsDropAltMaster, tmnxPtpClkPktStatsDropOther, tmnxPtpPeerPktStatAnnounce, tmnxPtpPeerPktStatSync, tmnxPtpPeerPktStatFollowUp, tmnxPtpPeerPktStatDelayRequest, tmnxPtpPeerPktStatDelayResp, tmnxPtpPeerPktStatSignaling, tmnxPtpPeerPktStatOther, tmnxPtpPeerPktStatUniReqAnno, tmnxPtpPeerPktStatUniReqSync, tmnxPtpPeerPktStatUniReqDelayRsp, tmnxPtpPeerPktStatUniGrantAnno, tmnxPtpPeerPktStatUniGrantSync, tmnxPtpPeerPktStatUniGrantDelRsp, tmnxPtpPeerPktStatUniDenyAnno, tmnxPtpPeerPktStatUniDenySync, tmnxPtpPeerPktStatUniDenyDelRsp, tmnxPtpPeerPktStatUniCancelAnno, tmnxPtpPeerPktStatUniCancelSync, tmnxPtpPeerPktStatUniCancelDelay, tmnxPtpPeerPktStatUniAckCnclAnno, tmnxPtpPeerPktStatUniAckCnclSync, tmnxPtpPeerPktStatUniAckCnclDly, tmnxPtpPeerPktStatOtherTLVs, tmnxPtpPeerPktStatDropBadDomain, tmnxPtpPeerPktStatDropAltMaster, tmnxPtpPeerPktStatDropOther } STATUS current DESCRIPTION "The group of objects indicating packet statistics for the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 7 } tmnxPtpClockRecoveryGroup OBJECT-GROUP OBJECTS { tmnxPtpClockRecStatsInitial, tmnxPtpClockRecStatsAcquiring, tmnxPtpClockRecStatsPhaseTrack, tmnxPtpClockRecStatsLocked, tmnxPtpClockRecStatsHoldover, tmnxPtpClockRecStatsSyncPktLoss, tmnxPtpClockRecStatsSyncHiPktLss, tmnxPtpClockRecStatsSyncStep, tmnxPtpClockRecStatsSyncHighPDV, tmnxPtpClockRecStatsDlyPktLoss, tmnxPtpClockRecStatsDlyHiPktLss, tmnxPtpClockRecStatsDlyStep, tmnxPtpClockRecStatsDlyHighPDV } STATUS current DESCRIPTION "The group of objects indicating the clock recovery state and event statistics for the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 8 } tmnxPtpPeerUnicastStatusGroup OBJECT-GROUP OBJECTS { tmnxPtpPeerUnicastStatus, tmnxPtpPeerUnicastRate, tmnxPtpPeerUnicastDuration, tmnxPtpPeerUnicastEventTime } STATUS current DESCRIPTION "The group of objects indicating the Peer Unicast Status information for the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 9 } tmnxPtpNotifyObjsGroup OBJECT-GROUP OBJECTS { tmnxPtpMasterClockLastIpAddrType, tmnxPtpMasterClockLastIpAddress, tmnxPtpNotifyRowPointer, tmnxPtpNotifyRowDescription } STATUS current DESCRIPTION "The group of objects used in notifications generated by the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 10 } tmnxPtpNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxPtpCardNotSupported, tmnxPtpCardNotSupportedClear, tmnxPtpMasterClockChangedEvent, tmnxPtpClockRecoveryStateChange, tmnxPtpOutOfResources, tmnxPtpOutOfResourcesClear, tmnxPtpDynamicChange } STATUS current DESCRIPTION "The group of notifications generated by the Precision Timing Protocol (PTP) on SROS series systems." ::= { tmnxPtpV9v0Groups 11 } tmnxPtpV10v0Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Groups 2 } tmnxPtpVRtrIfTimeStampGroup OBJECT-GROUP OBJECTS { tmnxPtpVRtrIfTableLastChanged } STATUS current DESCRIPTION "The group of objects maintaining table/row statistics for the Precision Timing Protocol (PTP) on version 10.0 of SROS series systems." ::= { tmnxPtpV10v0Groups 1 } tmnxPtpVRtrIfConfigGroup OBJECT-GROUP OBJECTS { tmnxPtpVRtrIfAdminState } STATUS current DESCRIPTION "The group of objects maintaining interface configuration for the Precision Timing Protocol (PTP) on version 10.0 of SROS series systems." ::= { tmnxPtpV10v0Groups 2 } tmnxPtpTimeInfoGroup OBJECT-GROUP OBJECTS { tmnxPtpTimeInfoTimescale, tmnxPtpTimeInfoCurrentTime, tmnxPtpTimeInfoFreqTraceable, tmnxPtpTimeInfoTimeTraceable, tmnxPtpTimeInfoTimeSource } STATUS current DESCRIPTION "The group of objects maintaining interface operational state for the Precision Timing Protocol (PTP) on version 10.0 of SROS series systems." ::= { tmnxPtpV10v0Groups 3 } tmnxPtpPeerOperGroup OBJECT-GROUP OBJECTS { tmnxPtpPeerTxTimeStampPoint, tmnxPtpPeerLastTxPortId, tmnxPtpPeerLastTxPortEncapType, tmnxPtpPeerLastTxPortEncapValue, tmnxPtpPeerRxTimeStampPoint, tmnxPtpPeerLastRxPortId, tmnxPtpPeerLastRxPortEncapType, tmnxPtpPeerLastRxPortEncapValue } STATUS current DESCRIPTION "The group of objects maintaining peer operational state for the Precision Timing Protocol (PTP) on version 10.0 of SROS series systems." ::= { tmnxPtpV10v0Groups 5 } tmnxPtpPacketStatsV10v0Group OBJECT-GROUP OBJECTS { tmnxPtpClkPktStatsTimeStampPort, tmnxPtpClkPktStatsTimeStampCpm, tmnxPtpPeerPktStatTimeStampPort, tmnxPtpPeerPktStatTimeStampCpm } STATUS current DESCRIPTION "The group of objects indicating packet statistics for the Precision Timing Protocol (PTP) on version 10.0 of SROS series systems." ::= { tmnxPtpV10v0Groups 6 } END