TERACOM-MIB

All MIBs › TERACOM-MIB

Organization: TERACOM

Last Updated: 2015-05-27

Category: Broadcast and Cable TV Equipment

Description: Manages Teracom broadcast transmitter operational status, RF output power, modulation parameters, and alarm conditions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TERACOM-MIB?

This MIB module manages the Teracom TCW240 family of SNMP-enabled environmental and I/O monitoring units, often deployed in broadcast, telecom, and data-center facilities to watch equipment-room conditions. It exposes device identity (name, version, host name, device ID/IP), digital I/O state, and a set of configurable sensor inputs with per-sensor thresholds (maximum, minimum, and hysteresis values) used to trigger alarms on out-of-range readings. It is squarely a hardware-status/environmental monitoring MIB: it is used to watch temperature, humidity, or other analog sensor readings against configured thresholds and to track digital I/O (e.g., door contacts, relays) rather than any router traffic counters. There is no indication of dependency on other MIBs; it defines a self-contained object tree for the device. It is typically deployed in equipment racks, broadcast transmitter sites, or telecom huts as a standalone environmental/alarm monitoring appliance. Network engineers evaluating or troubleshooting this functionality can download the TERACOM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TERACOM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teracom TCW240 environmental/I-O monitoring unit

Monitoring Examples

A facilities engineer would poll s1description alongside a sensor's live reading to identify which physical sensor (e.g., 'Room Temperature') is being reported, and compare it against s11MAXx10Int, s11MINx10Int, and s11HYSTx10Int to see the configured alarm thresholds and hysteresis band for that channel. A second channel's s12MAXx10Int/s12MINx10Int would be checked similarly for a different sensor input. The io and sensorsSetup branches let an admin confirm digital I/O line states and review or adjust the sensor configuration remotely, catching an environmental excursion before it damages nearby equipment.

What Can Be Monitored

sensor readings vs. configured max/min thresholds
hysteresis settings per sensor
digital I/O state
device identity (name/host/IP)

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises
snmpModules

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
teracom	1.3.6.1.4.1.38783
tcw240b	1.3.6.1.4.1.38783.1
trapNotifications	1.3.6.1.4.1.38783.1.0
NTF snmp_trap_notification	1.3.6.1.4.1.38783.1.0.1			SMIV2 Trap notification information for the SNMP Manager.
product	1.3.6.1.4.1.38783.1.1
STR name	1.3.6.1.4.1.38783.1.1.1	DisplayString	read-only	Name of product. e.g. teracom.cc etc.
STR version	1.3.6.1.4.1.38783.1.1.2	DisplayString	read-only	Version string. e.g. 1.0
DAT dateTime	1.3.6.1.4.1.38783.1.1.3	DateAndTime	read-only	Date and time
setup	1.3.6.1.4.1.38783.1.2
network	1.3.6.1.4.1.38783.1.2.1
MAC deviceID	1.3.6.1.4.1.38783.1.2.1.1	MacAddress	read-only	Device ID is Default MAC Address
STR hostName	1.3.6.1.4.1.38783.1.2.1.2	DisplayString	read-only	Host Name
IP deviceIP	1.3.6.1.4.1.38783.1.2.1.3	IpAddress	read-only	Device IP Address
io	1.3.6.1.4.1.38783.1.2.2
sensorsSetup	1.3.6.1.4.1.38783.1.2.2.1
sensor1setup	1.3.6.1.4.1.38783.1.2.2.1.1
STR s1description	1.3.6.1.4.1.38783.1.2.2.1.1.1	DisplayString	read-write	Sensor1 description
sensor11setup	1.3.6.1.4.1.38783.1.2.2.1.1.2
I32 s11MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.1.2.1	Integer32	read-write	S11 maximum value x10 in Integer format
I32 s11MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.1.2.2	Integer32	read-write	S11 minimum value x10 in Integer format
I32 s11HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.1.2.3	Integer32	read-write	S11 hysteresis value x10 in Integer format
sensor12setup	1.3.6.1.4.1.38783.1.2.2.1.1.3
I32 s12MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.1.3.1	Integer32	read-write	S12 maximum value x10 in Integer format
I32 s12MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.1.3.2	Integer32	read-write	S12 minimum value x10 in Integer format
I32 s12HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.1.3.3	Integer32	read-write	S12 hysteresis value x10 in Integer format
sensor2setup	1.3.6.1.4.1.38783.1.2.2.1.2
STR s2description	1.3.6.1.4.1.38783.1.2.2.1.2.1	DisplayString	read-write	sensor2 description
sensor21setup	1.3.6.1.4.1.38783.1.2.2.1.2.2
I32 s21MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.2.2.1	Integer32	read-write	s21 maximum value x10 in Integer format
I32 s21MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.2.2.2	Integer32	read-write	s21 minimum value x10 in Integer format
I32 s21HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.2.2.3	Integer32	read-write	s21 hysteresis value x10 in Integer format
sensor22setup	1.3.6.1.4.1.38783.1.2.2.1.2.3
I32 s22MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.2.3.1	Integer32	read-write	s22 maximum value x10 in Integer format
I32 s22MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.2.3.2	Integer32	read-write	s22 minimum value x10 in Integer format
I32 s22HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.2.3.3	Integer32	read-write	s22 hysteresis value x10 in Integer format
sensor3setup	1.3.6.1.4.1.38783.1.2.2.1.3
STR s3description	1.3.6.1.4.1.38783.1.2.2.1.3.1	DisplayString	read-write	sensor3 description
sensor31setup	1.3.6.1.4.1.38783.1.2.2.1.3.2
I32 s31MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.3.2.1	Integer32	read-write	s31 maximum value x10 in Integer format
I32 s31MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.3.2.2	Integer32	read-write	s31 minimum value x10 in Integer format
I32 s31HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.3.2.3	Integer32	read-write	s31 hysteresis value x10 in Integer format
sensor32setup	1.3.6.1.4.1.38783.1.2.2.1.3.3
I32 s32MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.3.3.1	Integer32	read-write	s32 maximum value x10 in Integer format
I32 s32MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.3.3.2	Integer32	read-write	s32 minimum value x10 in Integer format
I32 s32HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.3.3.3	Integer32	read-write	s32 hysteresis value x10 in Integer format
sensor4setup	1.3.6.1.4.1.38783.1.2.2.1.4
STR s4description	1.3.6.1.4.1.38783.1.2.2.1.4.1	DisplayString	read-write	sensor4 description
sensor41setup	1.3.6.1.4.1.38783.1.2.2.1.4.2
I32 s41MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.4.2.1	Integer32	read-write	s41 maximum value x10 in Integer format
I32 s41MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.4.2.2	Integer32	read-write	s41 minimum value x10 in Integer format
I32 s41HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.4.2.3	Integer32	read-write	s41 hysteresis value x10 in Integer format
sensor42setup	1.3.6.1.4.1.38783.1.2.2.1.4.3
I32 s42MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.4.3.1	Integer32	read-write	s42 maximum value x10 in Integer format
I32 s42MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.4.3.2	Integer32	read-write	s42 minimum value x10 in Integer format
I32 s42HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.4.3.3	Integer32	read-write	s42 hysteresis value x10 in Integer format
sensor5setup	1.3.6.1.4.1.38783.1.2.2.1.5
STR s5description	1.3.6.1.4.1.38783.1.2.2.1.5.1	DisplayString	read-write	sensor5 description
sensor51setup	1.3.6.1.4.1.38783.1.2.2.1.5.2
I32 s51MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.5.2.1	Integer32	read-write	s51 maximum value x10 in Integer format
I32 s51MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.5.2.2	Integer32	read-write	s51 minimum value x10 in Integer format
I32 s51HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.5.2.3	Integer32	read-write	s51 hysteresis value x10 in Integer format
sensor52setup	1.3.6.1.4.1.38783.1.2.2.1.5.3
I32 s52MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.5.3.1	Integer32	read-write	s52 maximum value x10 in Integer format
I32 s52MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.5.3.2	Integer32	read-write	s52 minimum value x10 in Integer format
I32 s52HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.5.3.3	Integer32	read-write	s52 hysteresis value x10 in Integer format
sensor6setup	1.3.6.1.4.1.38783.1.2.2.1.6
STR s6description	1.3.6.1.4.1.38783.1.2.2.1.6.1	DisplayString	read-write	sensor6 description
sensor61setup	1.3.6.1.4.1.38783.1.2.2.1.6.2
I32 s61MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.6.2.1	Integer32	read-write	s61 maximum value x10 in Integer format
I32 s61MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.6.2.2	Integer32	read-write	s61 minimum value x10 in Integer format
I32 s61HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.6.2.3	Integer32	read-write	s61 hysteresis value x10 in Integer format
sensor62setup	1.3.6.1.4.1.38783.1.2.2.1.6.3
I32 s62MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.6.3.1	Integer32	read-write	s62 maximum value x10 in Integer format
I32 s62MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.6.3.2	Integer32	read-write	s62 minimum value x10 in Integer format
I32 s62HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.6.3.3	Integer32	read-write	s62 hysteresis value x10 in Integer format
sensor7setup	1.3.6.1.4.1.38783.1.2.2.1.7
STR s7description	1.3.6.1.4.1.38783.1.2.2.1.7.1	DisplayString	read-write	sensor7 description
sensor71setup	1.3.6.1.4.1.38783.1.2.2.1.7.2
I32 s71MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.7.2.1	Integer32	read-write	s71 maximum value x10 in Integer format
I32 s71MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.7.2.2	Integer32	read-write	s71 minimum value x10 in Integer format
I32 s71HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.7.2.3	Integer32	read-write	s71 hysteresis value x10 in Integer format
sensor72setup	1.3.6.1.4.1.38783.1.2.2.1.7.3
I32 s72MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.7.3.1	Integer32	read-write	s72 maximum value x10 in Integer format
I32 s72MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.7.3.2	Integer32	read-write	s72 minimum value x10 in Integer format
I32 s72HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.7.3.3	Integer32	read-write	s72 hysteresis value x10 in Integer format
sensor8setup	1.3.6.1.4.1.38783.1.2.2.1.8
STR s8description	1.3.6.1.4.1.38783.1.2.2.1.8.1	DisplayString	read-write	sensor8 description
sensor81setup	1.3.6.1.4.1.38783.1.2.2.1.8.2
I32 s81MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.8.2.1	Integer32	read-write	s81 maximum value x10 in Integer format
I32 s81MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.8.2.2	Integer32	read-write	s81 minimum value x10 in Integer format
I32 s81HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.8.2.3	Integer32	read-write	s81 hysteresis value x10 in Integer format
sensor82setup	1.3.6.1.4.1.38783.1.2.2.1.8.3
I32 s82MAXx10Int	1.3.6.1.4.1.38783.1.2.2.1.8.3.1	Integer32	read-write	s82 maximum value x10 in Integer format
I32 s82MINx10Int	1.3.6.1.4.1.38783.1.2.2.1.8.3.2	Integer32	read-write	s82 minimum value x10 in Integer format
I32 s82HYSTx10Int	1.3.6.1.4.1.38783.1.2.2.1.8.3.3	Integer32	read-write	s82 hysteresis value x10 in Integer format
analogSetup	1.3.6.1.4.1.38783.1.2.2.2
analog1setup	1.3.6.1.4.1.38783.1.2.2.2.1
STR voltage1description	1.3.6.1.4.1.38783.1.2.2.2.1.1	DisplayString	read-write	Voltage 1 description
I32 voltage1max	1.3.6.1.4.1.38783.1.2.2.2.1.2	Integer32	read-write	Voltage 1 maximum
I32 voltage1min	1.3.6.1.4.1.38783.1.2.2.2.1.3	Integer32	read-write	Voltage 1 minimum
I32 voltage1hyst	1.3.6.1.4.1.38783.1.2.2.2.1.4	Integer32	read-write	Voltage 1 hysteresis
analog2setup	1.3.6.1.4.1.38783.1.2.2.2.2
STR voltage2description	1.3.6.1.4.1.38783.1.2.2.2.2.1	DisplayString	read-write	Voltage 2 description
I32 voltage2max	1.3.6.1.4.1.38783.1.2.2.2.2.2	Integer32	read-write	Voltage 2 maximum
I32 voltage2min	1.3.6.1.4.1.38783.1.2.2.2.2.3	Integer32	read-write	Voltage 2 minimum
I32 voltage2hyst	1.3.6.1.4.1.38783.1.2.2.2.2.4	Integer32	read-write	Voltage 2 hysteresis
analog3setup	1.3.6.1.4.1.38783.1.2.2.2.3
STR voltage3description	1.3.6.1.4.1.38783.1.2.2.2.3.1	DisplayString	read-write	Voltage 3 description
I32 voltage3max	1.3.6.1.4.1.38783.1.2.2.2.3.2	Integer32	read-write	Voltage 3 maximum
I32 voltage3min	1.3.6.1.4.1.38783.1.2.2.2.3.3	Integer32	read-write	Voltage 3 minimum
I32 voltage3hyst	1.3.6.1.4.1.38783.1.2.2.2.3.4	Integer32	read-write	Voltage 3 hysteresis
analog4setup	1.3.6.1.4.1.38783.1.2.2.2.4
STR voltage4description	1.3.6.1.4.1.38783.1.2.2.2.4.1	DisplayString	read-write	Voltage 4 description
I32 voltage4max	1.3.6.1.4.1.38783.1.2.2.2.4.2	Integer32	read-write	Voltage 4 maximum
I32 voltage4min	1.3.6.1.4.1.38783.1.2.2.2.4.3	Integer32	read-write	Voltage 4 minimum
I32 voltage4hyst	1.3.6.1.4.1.38783.1.2.2.2.4.4	Integer32	read-write	Voltage 4 hysteresis
digitalSetup	1.3.6.1.4.1.38783.1.2.2.3
STR digitalInput1description	1.3.6.1.4.1.38783.1.2.2.3.1	DisplayString	read-write	Digital Input 1 description
STR digitalInput2description	1.3.6.1.4.1.38783.1.2.2.3.2	DisplayString	read-write	Digital Input 2 description
STR digitalInput3description	1.3.6.1.4.1.38783.1.2.2.3.3	DisplayString	read-write	Digital Input 3 description
STR digitalInput4description	1.3.6.1.4.1.38783.1.2.2.3.4	DisplayString	read-write	Digital Input 4 description
relaysSetup	1.3.6.1.4.1.38783.1.2.2.4
relay1setup	1.3.6.1.4.1.38783.1.2.2.4.1
STR relay1description	1.3.6.1.4.1.38783.1.2.2.4.1.1	DisplayString	read-write	Relay 1 description
I32 relay1pulseWidth	1.3.6.1.4.1.38783.1.2.2.4.1.2	Integer32	read-write	Relay1 Pulse x100ms
CON relay1controlledBy	1.3.6.1.4.1.38783.1.2.2.4.1.3	CONTROLLED	read-write	Relay1 control logic
relay2setup	1.3.6.1.4.1.38783.1.2.2.4.2
STR relay2description	1.3.6.1.4.1.38783.1.2.2.4.2.1	DisplayString	read-write	Relay 2 description
I32 relay2pulseWidth	1.3.6.1.4.1.38783.1.2.2.4.2.2	Integer32	read-write	Relay2 Pulse x100ms
CON relay2controlledBy	1.3.6.1.4.1.38783.1.2.2.4.2.3	CONTROLLED	read-write	Relay2 control logic
relay3setup	1.3.6.1.4.1.38783.1.2.2.4.3
STR relay3description	1.3.6.1.4.1.38783.1.2.2.4.3.1	DisplayString	read-write	Relay 3 description
I32 relay3pulseWidth	1.3.6.1.4.1.38783.1.2.2.4.3.2	Integer32	read-write	Relay3 Pulse x100ms
CON relay3controlledBy	1.3.6.1.4.1.38783.1.2.2.4.3.3	CONTROLLED	read-write	Relay3 control logic
relay4setup	1.3.6.1.4.1.38783.1.2.2.4.4
STR relay4description	1.3.6.1.4.1.38783.1.2.2.4.4.1	DisplayString	read-write	Relay 4 description
I32 relay4pulseWidth	1.3.6.1.4.1.38783.1.2.2.4.4.2	Integer32	read-write	Relay4 Pulse x100ms
CON relay4controlledBy	1.3.6.1.4.1.38783.1.2.2.4.4.3	CONTROLLED	read-write	Relay4 control logic
monitorNcontrol	1.3.6.1.4.1.38783.1.3
sensors	1.3.6.1.4.1.38783.1.3.1
sensor1	1.3.6.1.4.1.38783.1.3.1.1
I32 s11x10Int	1.3.6.1.4.1.38783.1.3.1.1.1	Integer32	read-only	S11 value x10 in Integer format
I32 s12x10Int	1.3.6.1.4.1.38783.1.3.1.1.2	Integer32	read-only	S12 value x10 in Integer format
MAC s1ID	1.3.6.1.4.1.38783.1.3.1.1.3	MacAddress	read-only	S1 ID value
sensor2	1.3.6.1.4.1.38783.1.3.1.2
I32 s21x10Int	1.3.6.1.4.1.38783.1.3.1.2.1	Integer32	read-only	S21 value x10 in Integer format
I32 s22x10Int	1.3.6.1.4.1.38783.1.3.1.2.2	Integer32	read-only	S22 value x10 in Integer format
MAC s2ID	1.3.6.1.4.1.38783.1.3.1.2.3	MacAddress	read-only	S2 ID value
sensor3	1.3.6.1.4.1.38783.1.3.1.3
I32 s31x10Int	1.3.6.1.4.1.38783.1.3.1.3.1	Integer32	read-only	S31 value x10 in Integer format
I32 s32x10Int	1.3.6.1.4.1.38783.1.3.1.3.2	Integer32	read-only	S32 value x10 in Integer format
MAC s3ID	1.3.6.1.4.1.38783.1.3.1.3.3	MacAddress	read-only	S3 ID value
sensor4	1.3.6.1.4.1.38783.1.3.1.4
I32 s41x10Int	1.3.6.1.4.1.38783.1.3.1.4.1	Integer32	read-only	S41 value x10 in Integer format
I32 s42x10Int	1.3.6.1.4.1.38783.1.3.1.4.2	Integer32	read-only	S42 value x10 in Integer format
MAC s4ID	1.3.6.1.4.1.38783.1.3.1.4.3	MacAddress	read-only	S4 ID value
sensor5	1.3.6.1.4.1.38783.1.3.1.5
I32 s51x10Int	1.3.6.1.4.1.38783.1.3.1.5.1	Integer32	read-only	S51 value x10 in Integer format
I32 s52x10Int	1.3.6.1.4.1.38783.1.3.1.5.2	Integer32	read-only	S52 value x10 in Integer format
MAC s5ID	1.3.6.1.4.1.38783.1.3.1.5.3	MacAddress	read-only	S5 ID value
sensor6	1.3.6.1.4.1.38783.1.3.1.6
I32 s61x10Int	1.3.6.1.4.1.38783.1.3.1.6.1	Integer32	read-only	S61 value x10 in Integer format
I32 s62x10Int	1.3.6.1.4.1.38783.1.3.1.6.2	Integer32	read-only	S62 value x10 in Integer format
MAC s6ID	1.3.6.1.4.1.38783.1.3.1.6.3	MacAddress	read-only	S6 ID value
sensor7	1.3.6.1.4.1.38783.1.3.1.7
I32 s71x10Int	1.3.6.1.4.1.38783.1.3.1.7.1	Integer32	read-only	S71 value x10 in Integer format
I32 s72x10Int	1.3.6.1.4.1.38783.1.3.1.7.2	Integer32	read-only	S72 value x10 in Integer format
MAC s7ID	1.3.6.1.4.1.38783.1.3.1.7.3	MacAddress	read-only	S7 ID value
sensor8	1.3.6.1.4.1.38783.1.3.1.8
I32 s81x10Int	1.3.6.1.4.1.38783.1.3.1.8.1	Integer32	read-only	S81 value x10 in Integer format
I32 s82x10Int	1.3.6.1.4.1.38783.1.3.1.8.2	Integer32	read-only	S82 value x10 in Integer format
MAC s8ID	1.3.6.1.4.1.38783.1.3.1.8.3	MacAddress	read-only	S8 ID value
analog	1.3.6.1.4.1.38783.1.3.2
I32 voltage1x10Int	1.3.6.1.4.1.38783.1.3.2.1	Integer32	read-only	Voltage1 x10 in Integer format
I32 voltage2x10Int	1.3.6.1.4.1.38783.1.3.2.2	Integer32	read-only	Voltage2 x10 in Integer format
I32 voltage3x10Int	1.3.6.1.4.1.38783.1.3.2.3	Integer32	read-only	Voltage3 x10 in Integer format
I32 voltage4x10Int	1.3.6.1.4.1.38783.1.3.2.4	Integer32	read-only	Voltage4 x10 in Integer format
I32 voltage1x100Int	1.3.6.1.4.1.38783.1.3.2.5	Integer32	read-only	Voltage1 x100 in Integer format
I32 voltage2x100Int	1.3.6.1.4.1.38783.1.3.2.6	Integer32	read-only	Voltage2 x100 in Integer format
I32 voltage3x100Int	1.3.6.1.4.1.38783.1.3.2.7	Integer32	read-only	Voltage3 x100 in Integer format
I32 voltage4x100Int	1.3.6.1.4.1.38783.1.3.2.8	Integer32	read-only	Voltage4 x100 in Integer format
digital	1.3.6.1.4.1.38783.1.3.3
INT digitalInput1State	1.3.6.1.4.1.38783.1.3.3.1	INTEGER	read-only	Digital1 Input State
INT digitalInput2State	1.3.6.1.4.1.38783.1.3.3.2	INTEGER	read-only	Digital2 Input State
INT digitalInput3State	1.3.6.1.4.1.38783.1.3.3.3	INTEGER	read-only	Digital3 Input State
INT digitalInput4State	1.3.6.1.4.1.38783.1.3.3.4	INTEGER	read-only	Digital4 Input State
relays	1.3.6.1.4.1.38783.1.3.4
relay1	1.3.6.1.4.1.38783.1.3.4.1
INT relay1State	1.3.6.1.4.1.38783.1.3.4.1.1	INTEGER	read-write	Relay1 State
INT relay1Pulse	1.3.6.1.4.1.38783.1.3.4.1.2	INTEGER	read-write	Relay1 Pulse
relay2	1.3.6.1.4.1.38783.1.3.4.2
INT relay2State	1.3.6.1.4.1.38783.1.3.4.2.1	INTEGER	read-write	Relay2 State
INT relay2Pulse	1.3.6.1.4.1.38783.1.3.4.2.2	INTEGER	read-write	Relay2 Pulse
relay3	1.3.6.1.4.1.38783.1.3.4.3
INT relay3State	1.3.6.1.4.1.38783.1.3.4.3.1	INTEGER	read-write	Relay3 State
INT relay3Pulse	1.3.6.1.4.1.38783.1.3.4.3.2	INTEGER	read-write	Relay3 Pulse
relay4	1.3.6.1.4.1.38783.1.3.4.4
INT relay4State	1.3.6.1.4.1.38783.1.3.4.4.1	INTEGER	read-write	Relay4 State
INT relay4Pulse	1.3.6.1.4.1.38783.1.3.4.4.2	INTEGER	read-write	Relay4 Pulse
INT configurationSaved	1.3.6.1.4.1.38783.1.3.5	INTEGER	read-write	Configuration save status SAVED/UNSAVED
INT restartDevice	1.3.6.1.4.1.38783.1.3.6	INTEGER	read-write	Restart Device
INT temperatureUnit	1.3.6.1.4.1.38783.1.3.7	INTEGER	read-only	Unit of the all temperature values
INT hardwareErr	1.3.6.1.4.1.38783.1.3.8	INTEGER	read-only	Hardware Error
tcw240bMIBConformance	1.3.6.1.4.1.38783.1.4
tcw240bMIBCompliances	1.3.6.1.4.1.38783.1.4.1
tcw240bMIBCompliances1	1.3.6.1.4.1.38783.1.4.1.1			This group is for SNMP applications.
tcw240bMIBGroups	1.3.6.1.4.1.38783.1.4.2
tcw240bProductGroup	1.3.6.1.4.1.38783.1.4.2.1			A collection of objects providing basic product info.
tcw240bSetupGroup	1.3.6.1.4.1.38783.1.4.2.2			A collection of objects providing basic setup.
tcw240bMonitorGroup	1.3.6.1.4.1.38783.1.4.2.3			A collection of objects providing basic monitoring and control of a product.
tcw240bTrapGroup	1.3.6.1.4.1.38783.1.4.2.4			SNMP Trap Notification object.
snmpMIB	1.3.6.1.6.3.1			The MIB module for TCW240 SNMP entities.

RFC description

SNMPv2-based MIB from Teracom Systems for managing Ethernet remote monitoring and control devices (such as TCW240/TCW241). Defines objects for temperature, fan, and voltage sensor monitoring.

Start monitoring Teracom environmental monitoring units with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TERACOM-MIB

What Is TERACOM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description