TERACOM-MIB :: s71HYSTx10Int

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TERACOM-MIB › s71HYSTx10Int

s71HYSTx10Int

Module: TERACOM-MIB

OID (symbolic): TERACOM-MIB::s71HYSTx10Int

OID (numeric): 1.3.6.1.4.1.38783.1.2.2.1.7.2.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: s71 hysteresis value x10 in Integer format

What is s71HYSTx10Int?

This read-write Integer32 sets the hysteresis (deadband) applied around sensor 7 channel 1's MAX/MIN thresholds, in tenths of a unit, so a reading hovering right at a threshold doesn't flap the alarm on and off repeatedly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.38783.1.2.2.1.7.2.3
snmpwalk -v2c -c public <target> TERACOM-MIB::s71HYSTx10Int

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.38783.1.2.2.1.7.2.3.1
snmpget -v2c -c public <target> TERACOM-MIB::s71HYSTx10Int.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.38783.1.2.2.1.7.2.3.1 i <value>

Start monitoring Teracom environmental monitoring units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TERACOM-MIB::s71HYSTx10Int OID value, configure state conditions and alerts, and monitor any Teracom environmental monitoring units from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.38783teracomTERACOM-MIB
1.3.6.1.4.1.38783.1tcw240bTERACOM-MIB
1.3.6.1.4.1.38783.1.2setupTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2ioTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2.1sensorsSetupTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2.1.7sensor7setupTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2.1.7.2sensor71setupTERACOM-MIB
1.3.6.1.4.1.38783.1.2.2.1.7.2.3s71HYSTx10IntTERACOM-MIB